remove not needed files from tree only armv5

.gitignore

@@ -4,3 +4,4 @@ livecd/*
 pkgcache/*
 sources/*
 iso_rsync/*
+images/*

boot/arm/beagleboard-xm/uEnv.txt

@@ -1 +0,0 @@
-optargs=run_hardware_tests quiet earlyprintk=serial,uart1,115200 omapfb.mode=dvi:1280x720MR-24@50 console=tty1

boot/arm/beaglebone/uEnv.txt

@@ -1 +0,0 @@
-optargs=run_hardware_tests quiet

boot/arm/buffalo_ls_pro_live/README.txt

@@ -1,4 +1,4 @@
-Hi, welcome to Sabayon for the BeagleBone.
+Hi, welcome to Sabayon for the BeagleBoard xM.
 
 First of all, you may want to install the image into a new SDHC card.
 Make sure to have enough space for it, for example, if you downloaded
@@ -42,7 +42,7 @@ And if it's all good, type:
 
 To make sure everything has been flushed to the device.
 
-At this point, extract your SDHC and place it into the BeagleBone.
+At this point, extract your SDHC and place it into the BeagleBoard xM.
 You're set!
 
 
@@ -81,4 +81,3 @@ Contact
 -------
 Just mail us at website@sabayon.org if you need any help or register
 to our mailing list at http://lists.sabayon.org/cgi-bin/mailman/listinfo/devel
-

boot/arm/buffalo_ls_xhl/README.txt

@@ -1,4 +1,4 @@
-Hi, welcome to Sabayon for the PandaBoard.
+Hi, welcome to Sabayon for the BeagleBoard xM.
 
 First of all, you may want to install the image into a new SDHC card.
 Make sure to have enough space for it, for example, if you downloaded
@@ -42,7 +42,7 @@ And if it's all good, type:
 
 To make sure everything has been flushed to the device.
 
-At this point, extract your SDHC and place it into the PandaBoard.
+At this point, extract your SDHC and place it into the BeagleBoard xM.
 You're set!
 
 
@@ -81,4 +81,3 @@ Contact
 -------
 Just mail us at website@sabayon.org if you need any help or register
 to our mailing list at http://lists.sabayon.org/cgi-bin/mailman/listinfo/devel
-

boot/arm/efikamx/boot.script

@@ -1,12 +0,0 @@
-setenv ramdisk uInitrd;
-setenv kernel uImage;
-setenv bootargs console=tty1 console=/dev/${console} root=/dev/mmcblk0p2 rootwait rw quiet rootfstype=ext4;
-${loadcmd} ${ramdiskaddr} ${ramdisk};
-if imi ${ramdiskaddr}; then; else
-  setenv bootargs ${bootargs} noinitrd;
-  setenv ramdiskaddr "";
-fi;
-${loadcmd} ${kerneladdr} ${kernel}
-if imi ${kerneladdr}; then
-  bootm ${kerneladdr} ${ramdiskaddr}
-fi; 

boot/arm/efikamx/make_image.sh

@@ -1,2 +0,0 @@
-#!/bin/sh
-mkimage -A arm -O linux -a 0 -e 0 -T script -C none -n "EfikaMX Boot Script" -d boot.script boot.scr

boot/arm/pandaboard/uEnv.txt

@@ -1 +0,0 @@
-quiet console=tty1

boot/arm_startup/00-board-setup.start

@@ -4,8 +4,7 @@
 
 echo
 echo "Hello, this is the first boot. System is being configured..."
-echo "The root password is: root"
-echo "There is also a user called \"sabayon\", with password \"sabayon\""
+echo "The root password is: sablink"
 echo
 echo "Enjoy ARM"
 echo

boot/core/autorun.inf

@@ -1,6 +0,0 @@
-[autorun]
-label=Sabayon
-open=sabayon.bat
-action=Launch Virtual Sabayon
-icon=sabayon.ico
-

boot/core/isolinux/en.hlp

@@ -1,184 +0,0 @@
-F1Welcome to Sabayon Linux
-
-HELP INDEX
-
-KEY    TOPIC
-
-<F1F1>   This page, the help index.
-<F2F2>   Prerequisites for running Sabayon.
-<F3F3>   Boot methods for special ways of using this media.
-<F4F4>   Boot parameters (part I).
-<F5F5>   Boot parameters (part II).
-<F6F6>   Special features.
-<F7F7>   Gaming and multimedia capabilities.
-<F8F8>   Boot parameters for OpenGL and Accelerated Desktop.
-
-
-
-Press F2 through F8 for details, or Escape to exit help.F2Prerequisites for running SabayonLive Environment - No 3D Desktop:
-- i586 Processor (starting from AMD K5 and Intel Pentium)
-- At least 128Mb of RAM (256 suggested)
-- a 2D graphics card
-- a DDC capable Monitor
-- Mouse and keyboard
-
-Live Environment - 3D Desktop:
-- i686 Processor (starting from AMD K6 and Intel Pentium II)
-- At least 256Mb of RAM (512 suggested)
-- an OpenGL capable 3D graphics card (mostly NVIDIA, ATI, Intel)
-- a DDC capable Monitor
-- Mouse and keyboard
-
-Installation:
-- i586 Processor (see above)
-- At least 192Mb of RAM (256 suggested)
-- 8GB of free space
-- Internet connection (not mandatory but highly suggested)
-- a DDC capable Monitor
-- Mouse and keyboard
-
-Press F1 for the help index, or Escape to exit help.F4Boot methods- Available Boot methods (only from ISOLINUX command line):
-
-sabayon
-  Start the Sabayon Live system.
-install
-  Start the Graphical Installation.
-text-install
-  Start the Text mode Installation.
-genuine
-  Start the Sabayon Live system without proprietary drivers.
-console
-  Start the Sabayon Live system without loading X.Org.
-debug
-  Start the Sabayon Live system in Debug mode (expert).
-memtest
-  Perform a memory test.
-
-
-
-
-
-Press F1 for the help index, or Escape to exit help.F5Boot parameters (part I)Sabayon supports some extra features that can be enabled by adding the boot parameters below. Moreover, you can tune the system to behave in different ways.
-
-lang=
-  example: lang=fr_FR || lang=en_GB || lang=it_IT || lang=es_ES
-  note: ONLY valid glibc locale codes are accepted.
-res=
-  example: res=1280x1024 || res=1920x1440 || res=800x600
-refresh=
-  example: refresh=75 || refresh=50-85
-hsync=
-  example: hsync=64 || hsync=28-110
-xdriver=
-  example: xdriver=i810 || xdriver=sis || xdriver=mga
-insmod=
-  example: insmod=ndiswrapper || insmod=agpgart,gameport
-rmmod=
-  example: rmmod=ndiswrapper || rmmod=i2c,gameport
-sound=mute
-  Do not autoconfigure the sound mixer.
-nofreqscaling
-  Disable the autoconfiguration of CPU frequency scaling.
-noddc
-  Disable DDC Monitor autoconfiguration.
-
-Press F1 for the help index, or Escape to exit help.F6Boot parameters (part II)Sabayon supports some extra features that can be enabled by adding the boot parameters below. Moreover, you can tune the system to behave in different ways.
-
-session=
-  example: session=kde ( supported: kde,gnome,metisse-kde,metisse-gnome,fluxbox )
-music
-  Enable music during boot (experimental).
-autoscramble
-  Randomization of root and sabayonuser passwords.
-nox
-  Start the System without X.Org.
-legacy
-  Start with safe parameters - for legacy compatibility.
-noaccelmanager
-  Disable Acceleration Manager (for 3D desktop selection).
-
-noapic nolapic
-  Disable APIC (mostly used on some faulty bioses).
-acpi=off
-  Disable ACPI completely.
-pci=noacpi
-  Disable ACPI for PCI maps (HP servers and VIA chipsets).
-floppy.floppy=thinkpad
-  Useful for some ThinkPad notebooks.
-vga=771
-
-
-Press F1 for the help index, or Escape to exit help.F7Special featuresSabayon supports some enhanced features, like the ability to surf anonymously and persistent home directory.
-
-tor
-  Enable the system to use Tor/Privoxy system to surf the web anonymously.
-
-
-
-
-
-XsistenCe:
- - What is XsistenCe?
- - One Removable Device (USB storage) + Sabayon = your data everywhere.
-   In other words, you can use your Home directory in read/write mode and
-   your data will be stored on your external non-volatile removable device.
-
-  - Just have a previously formatted USB external disk (like a flash pen).
-  - A blank file called "xsistence-mode" on the root of the USB storage above.
-  - Some free space on it, at least 15 Mb.
-  - Add "xsistence" boot option to enable it.
-    - If the System detects a previously created image file, it will use that.
-    - If the System does not detect an XsistenCe image, it will be created.
-      - You can specify the size (MB) of it, by adding: "xsistence_mb=xxx"
-
- - boot example: > sabayon xsistence xsistence_mb=100
-
-Press F1 for the help index, or Escape to exit help.F8Gaming and multimedia capabilitiesSabayon is the most advanced and complete Linux distribution when it comes to multimedia completeness and capabilities. Use the parameters above only in ISOLINUX command line mode.
-
-secondlife
-  Start Second Life Game.
-sauerbraten
-  Start Sauerbraten Game.
-savage
-  Start Savage Game.
-warsow
-  Start Warsow Game.
-dangerdeep
-  Start Dangerdeep Game.
-torcs
-  Start Torcs Game.
-nexuiz
-  Start Nexuiz Game.
-flightgear
-  Start FlightGear Game.
-
-geexbox
-  Start GeeXboX 1.0 Media Center.
-mediacenter
-  Start Sabayon with Freevo Media Center.
-
-Press F1 for the help index, or Escape to exit help.F9OpenGL and Accelerated DesktopIf you want to try to get your OpenGL Acceleration or your Accelerated Desktop to work, just poke with the commands above.
-
-opengl=
-  Force the System to use a specific OpenGL subsystem, when autodetection fails.
-  - example for NVIDIA (with NVIDIA Proprietary drivers) > sabayon opengl=nvidia
-  - example for ATI (with ATI Proprietary drivers) > sabayon opengl=ati
-  - example for X.Org Mesa implementation > sabayon opengl=xorg-x11
-
-agpgart
-  Force the System to load the AGP driver, when the autodetection fails.
-  - example: > sabayon opengl=xorg-x11
-
-noaccelmanager
-  Disable the loading of the Acceleration Manager application.
-  - example: > sabayon noaccelmanager
-
-aiglx
-  Enable AIGLX Desktop Acceleration and disable Acceleration Manager.
-  - example: > sabayon aiglx
-
-
-
-
-
-Press F1 for the help index, or Escape to exit help.

boot/core/isolinux/exithelp.cfg

@@ -1,3 +0,0 @@
-label menu
-	kernel vesamenu.c32
-	config isolinux.cfg

boot/core/isolinux/f1.txt

@@ -1,25 +0,0 @@
-                  0fWelcome to Sabayon Linux!07                                   09F107
-
-This is a Sabayon Linux media disc, can't you smell the difference?
-
-0fHELP INDEX07
-
-0fKEY    TOPIC07
-
-<09F107>   This page, the help index.
-<09F207>   Prerequisites for running SabayonLinux.
-<09F307>   Boot methods for special ways of using this media
-<09F407>   Boot parameters (part I).
-<09F507>   Boot parameters (part II).
-<09F607>   Special features.
-<09F707>   Gaming and multimedia capabilities.
-<09F807>   Boot parameters for OpenGL and Accelerated Desktop.
-
-
-
-For F1-F8 type control and F then the digit 1-8
-
-
-
-
-Press F2 through F8 for details, or ENTER to 

boot/core/isolinux/f2.txt

@@ -1,23 +0,0 @@
-0fPREREQUISITES FOR RUNNING SABAYONLINUX07                                        09F207
-
-0fLive Environment - No 3D Desktop:07
-- i586 Processor (starting from AMD K5 and Intel Pentium)
-- At least 128Mb of RAM (256 suggested)
-- a 2D graphics card
-- a DDC capable Monitor
-- Mouse and keyboard
-0fLive Environment - 3D Desktop:07
-- i686 Processor (starting from AMD K6 and Intel Pentium II)
-- At least 256Mb of RAM (512 suggested)
-- an OpenGL capable 3D graphics card (mostly NVIDIA, ATI, Intel)
-- a DDC capable Monitor
-- Mouse and keyboard
-0fInstallation:07
-- i586 Processor (see above)
-- At least 192Mb of RAM (256 suggested)
-- 8GB of free space
-- Internet connection (not mandatory but highly suggested)
-- a DDC capable Monitor
-- Mouse and keyboard
-
-Press F1control and F then 1 for the help index, or ENTER to 

boot/core/isolinux/f3.txt

@@ -1,23 +0,0 @@
-0fBOOT METHODS07                                                                  09F307
-
-0f- Available boot methods:07
-0fsabayon07
-  Start the SabayonLinux Live system.
-0finstall07
-  Start the Graphical Installation.
-0ftext-install07
-  Start the Text mode Installation.
-0fgenuine07
-  Start the SabayonLinux Live system without proprietary drivers.
-0fconsole07
-  Start the SabayonLinux Live system without loading X.Org.
-0fdebug07
-  Start the SabayonLinux Live system in Debug mode (expert).
-0fmemtest07
-  Perform a memory test.
-
-
-
-
-
-Press F1control and F then 1 for the help index, or ENTER to 

boot/core/isolinux/f4.txt

@@ -1,23 +0,0 @@
-0fBOOT PARAMETERS (PART I)07                                                      09F407
-
-0flang=07 --> Set the system Language.
-  example: lang=fr_FR || lang=en_GB || lang=it_IT || lang=es_ES
-  note: ONLY valid glibc locale codes are accepted.
-0fres=07 --> Force a specific X.Org resolution.
-  example: res=1280x1024 || res=1920x1440 || res=800x600
-0frefresh=07 --> Force a specific X.Org Vertical Refresh rate (or range).
-  example: refresh=75 || refresh=50-85
-0fhsync=07 --> Force a specific X.Org Horizontal Sync rate (or range).
-  example: hsync=64 || hsync=28-110
-0fxdriver=07 --> Force X.Org to use a specific (and valid) X driver name.
-  example: xdriver=i810 || xdriver=sis || xdriver=mga
-0finsmod=07 --> Load a specific kernel module or modules (--> separated by ",")
-  example: insmod=ndiswrapper || insmod=agpgart,gameport
-0frmmod=07 --> Remove a specific kernel module or modules (--> separated by ",")
-  example: rmmod=ndiswrapper || rmmod=i2c,gameport
-0fsound=mute07
-  Do not autoconfigure the sound mixer.
-0fnofreqscaling07
-  Disable the autoconfiguration of CPU frequency scaling.
-
-Press F1control and F then 1 for the help index, or ENTER to 

boot/core/isolinux/f5.txt

@@ -1,23 +0,0 @@
-0fBOOT PARAMETERS (PART II)07                                                     09F507
-
-SabayonLinux supports some extra features that can be enabled by adding the boot
-parameters below. Moreover, you can tune the system to behave in different ways.
-
-0fsession=07 --> Parameter to force the autologin on a specific Desktop Environment
- example: session=kde ( supported: kde,gnome,metisse-kde,metisse-gnome,fluxbox )
-0fnomusic07 --> Disable music during boot.
- NOTE: the music is released under Creative Commons.
-0fautoscramble07 --> Randomization of root and primary user passwords.
-0fnox07 --> Start the system without X.Org.
-0flegacy07 --> Start with safe parameters - for legacy compatibility.
-0fnoaccelmanager07 --> Disable Acceleration Manager
-0fnoddc07 --> Disable DDC Monitor autoconfiguration
-0f- IN CASE OF SYSTEM BOOT FAILURES:
-0fnoapic nolapic07 --> Disable APIC
-0facpi=off07 --> Disable Proprietary Graphics Drivers (NVIDIA, ATI)
-0fpci=noacpi07 --> Disable ACPI for PCI maps (HP servers and VIA chipsets)
-0ffloppy.floppy=thinkpad07 --> For some IBM ThinkPads
-0fvga=77107 --> Laptops with screen display problems
-
-
-Press F1control and F then 1 for the help index, or ENTER to 

boot/core/isolinux/f6.txt

@@ -1,23 +0,0 @@
-0fSPECIAL FEATURES07                                                              09F607
-
-0ftor07 --> Enable the system to use Tor/Privoxy system to surf the web anonimously.
-
-
-
-0fXsistenCe:07 
- - What is XsistenCe? 
- - One Removable Device (USB storage) + SabayonLinux = your data everywhere.
-   In other words, you can use your Home directory in read/write mode and
-   your data will be stored on your external non-volatile removable device.
-
-  - Just have a previously formatted USB external disk (like a flash pen).
-  - A blank file called "xsistence-mode" on the root of the USB storage above.
-  - Some free space on it, at least 15 Mb.
-  - Add "xsistence" boot option to enable it.
-    - If the System detects a previously created image file, it will use that.
-    - If the System does not detect an XsistenCe image, it will be created.
-      - You can specify the size (MB) of it, by adding: "xsistence_mb=xxx"
-
- - boot example: > sabayon xsistence xsistence_mb=100
-
-Press F1control and F then 1 for the help index, or ENTER to 

boot/core/isolinux/f7.txt

@@ -1,30 +0,0 @@
-0fGAMING AND MULTIMEDIA CAPABILITIES07                                            09F707
-SabayonLinux is the most advanced and complete Linux distribution
-when it comes to multimedia completeness and capabilities.
-
-0fsecondlife07
-  Start Second Life Game.
-0fsauerbraten07
-  Start Sauerbraten Game.
-0fsavage07
-  Start Savage Game.
-0fwarsow07
-  Start Warsow Game.
-0fdangerdeep07
-  Start Dangerdeep Game.
-0ftorcs07
-  Start Torcs Game.
-0fnexuiz07
-  Start Nexuiz Game.
-0fflightgear07
-  Start FlightGear Game.
-
-0fgeexbox07
-  Start GeeXboX 1.0 Media Center.
-0fmediacenter 07
-  Start SabayonLinux with Freevo Media Center.
-
-Press F1control and F then 1 for the help index, or ENTER to 
-
-
-

boot/core/isolinux/f8.txt

@@ -1,25 +0,0 @@
-0fOPENGL AND ACCELERATED DESKTOP.07                                               09F807
-
-0fopengl=07
-  Force the System to use a specific OpenGL subsystem, when autodetection fails.
-  - example for NVIDIA (with NVIDIA Proprietary drivers) > sabayon opengl=nvidia
-  - example for ATI (with ATI Proprietary drivers) > sabayon opengl=ati
-  - example for X.Org Mesa implementation > sabayon opengl=xorg-x11
-
-0fagpgart07
-  Force the System to load the AGP driver, when the autodetection fails.
-  - example: > sabayon opengl=xorg-x11
-
-0fnoaccelmanager07
-  Disable the loading of the Acceleration Manager application.
-  - example: > sabayon noaccelmanager
-0faiglx07
-  Enable AIGLX Desktop Acceleration and disable Acceleration Manager.
-  - example: > sabayon aiglx
-
-
-
-
-Press F1control and F then 1 for the help index, or ENTER to 
-
-

boot/core/isolinux/isolinux.cfg

@@ -1,5 +0,0 @@
-INCLUDE menu.cfg
-DEFAULT vesamenu.c32
-PROMPT 1
-TIMEOUT 100
-UI gfxboot bootlogo

boot/core/isolinux/isolinux.txt

@@ -1,8 +0,0 @@
-splash.rle
-0f
-
-Welcome to Sabayon __VERSION__ SpinBase
-
-Press F1control and F then 1 for help and advanced boot modes.
-Automatic Monitor detection, to force a resolution use res=<resolution>.07
-

boot/core/isolinux/langlist

@@ -1,66 +0,0 @@
-am
-ar
-ast
-be
-bg
-bn
-bs
-ca
-cs
-cy
-da
-de
-dz
-el
-en
-eo
-es
-et
-eu
-fi
-fr
-ga
-gl
-gu
-he
-hi
-hr
-hu
-id
-it
-ja
-ka
-kk
-km
-ko
-ku
-lt
-lv
-mk
-ml
-mr
-ne
-nl
-nb
-nn
-pa
-pl
-pt_BR
-pt_PT
-ro
-ru
-se
-sk
-sl
-sq
-sr
-sv
-ta
-th
-tl
-tr
-uk
-vi
-wo
-zh_CN
-zh_TW

boot/core/isolinux/langs

@@ -1,36 +0,0 @@
-bn
-bs
-bg
-cs
-cy_GB
-da
-de
-en
-es
-fr
-el
-hi
-hr
-it
-ja
-km_KH
-ko
-lt
-hu
-nl
-nb
-pl
-pt_PT
-pt_BR
-pa
-ro
-ru
-zh_CN
-sr
-sk
-sl
-fi
-sv
-zh_TW
-tr
-uk

boot/core/isolinux/menu.cfg

@@ -1,13 +0,0 @@
-menu hshift 13
-menu width 49
-menu margin 8
-
-menu title Sabayon boot menu
-include stdmenu.cfg
-include txt.cfg
-label help
-	menu label ^Help
-	text help
-   Display help screens; type 'menu' at boot prompt to return to this menu
-	endtext
-	config prompt.cfg

boot/core/isolinux/prompt.cfg

@@ -1,16 +0,0 @@
-DEFAULT vesamenu.c32
-UI gfxboot bootlogo
-PROMPT 1
-DISPLAY isolinux.txt
-TIMEOUT 300
-INCLUDE menu.cfg
-INCLUDE exithelp.cfg
-
-f1 f1.txt
-f2 f2.txt
-f3 f3.txt
-f4 f4.txt
-f5 f5.txt
-f6 f6.txt
-f7 f7.txt
-f8 f8.txt

boot/core/isolinux/stdmenu.cfg

@@ -1,15 +0,0 @@
-menu background splash.png
-menu color title	* #FFFFFFFF *
-menu color border	* #00000000 #00000000 none
-menu color sel		* #ffffffff #76a1d0ff *
-menu color hotsel	1;7;37;40 #ffffffff #76a1d0ff *
-menu color tabmsg	* #ffffffff #00000000 *
-menu color help		37;40 #ffdddd00 #00000000 none
-menu vshift 12
-menu rows 10
-menu helpmsgrow 15
-# The command line must be at least one line from the bottom.
-menu cmdlinerow 16
-menu timeoutrow 16
-menu tabmsgrow 18
-menu tabmsg Press ENTER to boot or TAB to edit a menu entry

boot/core/isolinux/txt.cfg

@@ -1,36 +0,0 @@
-default console
-
-label console
-  menu label Start Sabayon __VERSION__ SpinBase
-  kernel /boot/sabayon
-  append root=/dev/ram0 initrd=/boot/sabayon.igz aufs init=/linuxrc cdroot looptype=squashfs loop=/livecd.squashfs splash=verbose,theme:sabayon __KMS__ vga=791 gfxpayload=1024x768x16 gentoo=nox nox console=tty1 quiet -- 
-
-label text-install
-  menu label ^Installation
-  kernel /boot/sabayon
-  append root=/dev/ram0 initrd=/boot/sabayon.igz aufs init=/linuxrc cdroot looptype=squashfs loop=/livecd.squashfs splash=verbose,theme:sabayon __KMS__ vga=791 gfxpayload=1024x768x16 console=tty1 quiet installer-text gentoo=nox nox --
-
-label genuine
-  menu label Start in Safe ^Mode
-  kernel /boot/sabayon
-  append root=/dev/ram0 initrd=/boot/sabayon.igz aufs init=/linuxrc cdroot looptype=squashfs loop=/livecd.squashfs splash=silent,theme:sabayon __KMS__ vga=788 gfxpayload=800x600x16 noproprietary res=1024x768 pci=routeirq irqpoll console=tty1 quiet nokvm -- 
-
-label checkdisk
-  menu label ^Check disc for defects
-  kernel /boot/sabayon
-  append root=/dev/ram0 initrd=/boot/sabayon.igz aufs init=/linuxrc cdroot looptype=squashfs loop=/livecd.squashfs splash=verbose,theme:sabayon __KMS__ vga=791 console=tty1 quiet checkdisc --
-
-label debug
-  menu label Deb^ug mode
-  kernel /boot/sabayon
-  append root=/dev/ram0 initrd=/boot/sabayon.igz aufs init=/linuxrc cdroot looptype=squashfs loop=/livecd.squashfs console=tty1 debug --
-
-label memtest
-  menu label Memory ^test
-  kernel /boot/memtest
-  append -
-
-label hd
-  menu label ^Boot from first hard disk
-  localboot 0x80
-  append -