initial commit

CLIENT_DATA/delsub3264.ins

@@ -0,0 +1,107 @@
+; Copyright (c) uib gmbh (www.uib.de)
+; This sourcecode is owned by uib gmbh
+; and published under the Terms of the General Public License.
+; credits: http://www.opsi.org/credits/
+
+
+Set $UninstallProgram32$ = $InstallDir32$ + "\unins000.exe"
+
+Set $UninstallProgram64$ = $InstallDir64$ + "\unins000.exe"
+
+if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
+	Message "Uninstalling " + $ProductId$ + " 32 Bit..."
+
+	if FileExists($UninstallProgram32$)
+		comment "Uninstall program found, starting uninstall"
+		Winbatch_uninstall_32
+		sub_check_exitcode
+	endif
+
+	comment "Delete files"
+	Files_uninstall_32 /32Bit
+	comment "Cleanup registry"
+	Registry_uninstall /32Bit
+endif
+
+if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
+	Message "Uninstalling " + $ProductId$ + " 64 Bit..."
+
+	if FileExists($UninstallProgram64$)
+		comment "Uninstall program found, starting uninstall"
+		Winbatch_uninstall_64
+		sub_check_exitcode
+	endif
+
+	comment "Delete files"
+	Files_uninstall_64 /64Bit
+	comment "Cleanup registry"
+	Registry_uninstall /64Bit
+endif
+
+comment "Delete program shortcuts"
+LinkFolder_uninstall
+
+[Winbatch_uninstall_32]
+"$UninstallProgram32$" /SILENT
+
+
+[Files_uninstall_32]
+; Example for recursively deleting the installation directory (don't forget the trailing backslash):
+;
+; delete -sf "$InstallDir32$\"
+
+[Winbatch_uninstall_64]
+"$UninstallProgram64$" /SILENT
+
+
+[Files_uninstall_64]
+; Example for recursively deleting the installation directory (don't forget the trailing backslash):
+;
+; delete -sf "$InstallDir64$\"
+
+[Registry_uninstall]
+; Example of deleting a registry key:
+;
+; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
+
+[LinkFolder_uninstall]
+; Example of deleting a folder from AllUsers startmenu:
+;
+; set_basefolder common_programs
+; delete_subfolder $ProductId$
+;
+; Example of deleting a shortcut from AllUsers desktop:
+;
+; set_basefolder common_desktopdirectory
+; set_subfolder ""
+; delete_element $ProductId$
+
+[Sub_check_exitcode]
+comment "Test for installation success via exit code"
+set $ExitCode$ = getLastExitCode
+; informations to exit codes see
+; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
+; http://msdn.microsoft.com/en-us/library/aa368542.aspx
+if ($ExitCode$ = "0")
+	comment "Looks good: setup program gives exitcode zero"
+else
+	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
+	if ($ExitCode$ = "1605")
+		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
+		comment "Uninstall of a not installed product failed - no problem"
+	else
+		if ($ExitCode$ = "1641")
+			comment "looks good: setup program gives exitcode 1641"
+			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
+		else
+			if ($ExitCode$ = "3010")
+				comment "looks good: setup program gives exitcode 3010"
+				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
+			else
+				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
+				isFatalError
+			endif
+		endif
+	endif
+endif
+

CLIENT_DATA/setup3264.ins

@@ -0,0 +1,178 @@
+; Copyright (c) uib gmbh (www.uib.de)
+; This sourcecode is owned by uib
+; and published under the Terms of the General Public License.
+; credits: http://www.opsi.org/credits/
+
+[Actions]
+requiredWinstVersion >= "4.10.8.6"
+
+DefVar $UninstallProgram32$
+DefVar $UninstallProgram64$
+DefVar $LogDir$
+DefVar $ProductId$  
+DefVar $MinimumSpace$
+DefVar $InstallDir32$
+DefVar $InstallDir64$
+DefVar $ExitCode$
+DefVar $INST_SystemType$
+DefVar $INST_architecture$
+
+Set $INST_SystemType$ = GetSystemType
+set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
+
+
+Set $LogDir$ = "%SystemDrive%\tmp"
+
+; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh
+; and adds the following variables:
+;   from builder-product.cfg :  all variables definded by attribute WINST[index]
+;   from builder-product.cfg :  VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE   
+;   from opsi-builder.cfg    :  CREATOR_TAG CREATOR_NAME CREATOR_EMAIL           
+;   auto generated winst-variables
+;         $IconFile$: path to product picture
+;
+@@BUILDER_VARIABLES@@
+
+; ----------------------------------------------------------------
+; - Please edit the following values                             -
+; ----------------------------------------------------------------
+;$ProductId$ should be the name of the product in opsi
+; therefore please: only lower letters, no umlauts, 
+; no white space use '-' as a seperator
+Set $ProductId$       = "peazip"
+Set $MinimumSpace$    = "15 MB"
+; the path were we find the product after the installation
+Set $InstallDir32$      = "%ProgramFiles32Dir%\PeaZip"
+Set $InstallDir64$      = "%ProgramFiles64Dir%\PeaZip"
+; ----------------------------------------------------------------
+
+if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
+	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
+	isFatalError
+	; Stop process and set installation status to failed
+else
+	comment "Show product picture"
+	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
+	
+	if FileExists("%ScriptPath%\delsub3264.ins")
+		comment "Start uninstall sub section"
+		Sub "%ScriptPath%\delsub3264.ins"
+	endif
+	
+	comment "installing"
+
+	if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
+		Message "Installing " + $ProductId$ + " 32 Bit..."
+		comment "Start setup program"
+		Winbatch_install_32
+		Sub_check_exitcode
+		comment "Copy files"
+		Files_install_32 /32Bit
+		comment "Patch Registry"
+		Registry_install /32Bit
+		comment "Create shortcuts"
+		LinkFolder_install
+	endif
+
+	if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
+		Message "Installing " + $ProductId$ + " 64 Bit..."
+		comment "Start setup program"
+		Winbatch_install_64
+		Sub_check_exitcode
+		comment "Copy files"
+		Files_install_64 /64Bit
+		comment "Patch Registry"
+		Registry_install /64Bit
+		comment "Create shortcuts"
+		LinkFolder_install
+	endif
+	
+endif
+
+[Winbatch_install_32]
+"$Instal32Exe$" /SILENT
+
+[Files_install_32]
+; Example of recursively copying some files into the installation directory:
+;
+; copy -s "%ScriptPath%\files\*.*" "$InstallDir32$"
+
+[Winbatch_install_64]
+"$Install64Exe$" /SILENT
+
+[Files_install_64]
+; Example of recursively copying some files into the installation directory:
+;
+; copy -s "%ScriptPath%\files\*.*" "$InstallDir64$"
+
+[Registry_install]
+; Example of setting some values of an registry key:
+;
+; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
+; set "name1" = "some string value"
+; set "name2" = REG_DWORD:0001
+; set "name3" = REG_BINARY:00 af 99 cd
+
+[LinkFolder_install]
+; Example of deleting a folder from AllUsers startmenu:
+;
+; set_basefolder common_programs
+; delete_subfolder $ProductId$
+;
+; Example of creating an shortcut to the installed exe in AllUsers startmenu:
+;
+; set_basefolder common_programs
+; set_subfolder $ProductId$
+;
+; set_link
+; 	name: $ProductId$
+; 	target: <path to the program>
+; 	parameters:
+; 	working_dir: $InstallDir$
+; 	icon_file:
+; 	icon_index:
+; end_link
+;
+; Example of creating an shortcut to the installed exe on AllUsers desktop:
+;
+; set_basefolder common_desktopdirectory
+; set_subfolder ""
+;
+; set_link
+; 	name: $ProductId$
+; 	target: <path to the program>
+; 	parameters: <some_param>
+; 	working_dir: $InstallDir$
+; 	icon_file: <path to icon file>
+; 	icon_index: 2
+; end_link
+
+[Sub_check_exitcode]
+comment "Test for installation success via exit code"
+set $ExitCode$ = getLastExitCode
+; informations to exit codes see
+; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
+; http://msdn.microsoft.com/en-us/library/aa368542.aspx
+if ($ExitCode$ = "0")
+	comment "Looks good: setup program gives exitcode zero"
+else
+	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
+	if ($ExitCode$ = "1605")
+		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
+		comment "Uninstall of a not installed product failed - no problem"
+	else
+		if ($ExitCode$ = "1641")
+			comment "looks good: setup program gives exitcode 1641"
+			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
+		else
+			if ($ExitCode$ = "3010")
+				comment "looks good: setup program gives exitcode 3010"
+				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
+			else
+				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
+				isFatalError
+			endif
+		endif
+	endif
+endif
+

CLIENT_DATA/uninstall3264.ins

@@ -0,0 +1,53 @@
+; Copyright (c) uib gmbh (www.uib.de)
+; This sourcecode is owned by uib gmbh
+; and published under the Terms of the General Public License.
+; credits: http://www.opsi.org/credits/
+
+[Actions]
+requiredWinstVersion >= "4.10.8.6"
+
+DefVar $UninstallProgram32$
+DefVar $UninstallProgram64$
+DefVar $LogDir$
+DefVar $ExitCode$
+DefVar $ProductId$
+DefVar $InstallDir32$
+DefVar $InstallDir64$
+DefVar $INST_SystemType$
+DefVar $INST_architecture$
+
+Set $INST_SystemType$ = GetSystemType
+set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
+
+
+Set $LogDir$ = "%SystemDrive%\tmp"
+
+; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh
+; and adds the following variables:
+;   from builder-product.cfg :  all variables definded by attribute WINST[index]
+;   from builder-product.cfg :  VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE   
+;   from opsi-builder.cfg    :  CREATOR_TAG CREATOR_NAME CREATOR_EMAIL           
+;   auto generated winst-variables
+;         $IconFile$: path to product picture
+;
+@@BUILDER_VARIABLES@@
+
+; ----------------------------------------------------------------
+; - Please edit the following values                             -
+; ----------------------------------------------------------------
+Set $ProductId$       = "peazip"
+Set $InstallDir32$    = "%ProgramFiles32Dir%\PeaZip"
+Set $InstallDir64$    = "%ProgramFiles64Dir%\PeaZip"
+; ----------------------------------------------------------------
+
+
+comment "Show product picture"
+ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
+
+Message "Uninstalling " + $ProductId$ + " ..."
+
+if FileExists("%ScriptPath%\delsub3264.ins")
+	comment "Start uninstall sub section"
+	Sub "%ScriptPath%\delsub3264.ins"
+endif
+

OPSI/changelog.txt

@@ -0,0 +1,2 @@
+Don't add cahngelog entries here!
+It get autogenerated by the opsi-builder.sh

OPSI/control

@@ -0,0 +1,31 @@
+[Package]
+version: RELEASE
+depends: 
+incremental: False
+
+[Product]
+type: localboot
+id: peazip
+name: PeaZip
+description: PeaZip is a free cross-platform file archiver that provides an unified portable GUI for many Open Source technologies like 7-Zip, FreeArc, PAQ, UPX...
+advice: ADVICE
+version: VERSION
+priority: PRIORITY
+licenseRequired: False
+productClasses: 
+setupScript: setup3264.ins
+uninstallScript: uninstall3264.ins
+updateScript: 
+alwaysScript: 
+onceScript: 
+customScript: 
+userLoginScript: 
+
+[ProductProperty]
+type: unicode
+name: install_architecture
+multivalue: False
+editable: False
+description: which architecture (32/64 bit) has to be installed
+values: ["32 only", "64 only", "both", "system specific"]
+default: ["system specific"]

OPSI/postinst

@@ -0,0 +1,9 @@
+#! /bin/sh
+#
+# postinst script for softprod
+# This script executes after unpacking files from that archive and registering the product at the server.
+#
+# The following environment variables can be used to obtain information about the current installation:
+#   PRODUCT_ID: id of the current product
+#   CLIENT_DATA_DIR: directory which contains the installed client data
+#

OPSI/preinst

@@ -0,0 +1,9 @@
+#! /bin/sh
+#
+# preinst script for softprod
+# This script executes before that package will be unpacked from its archive file.
+#
+# The following environment variables can be used to obtain information about the current installation:
+#   PRODUCT_ID: id of the current product
+#   CLIENT_DATA_DIR: directory where client data will be installed
+#

PEAZIP.png.sha1sum

@@ -0,0 +1 @@
+fafdd4b19e0918ef2a65104b33256bd07d08d0c0  /home/mario/.opsi-dist-cache/peazip-4.4//PEAZIP.png

Testing.txt

@@ -0,0 +1,28 @@
+*** Qualitiymanagement/Testing procedure
+
+- Product:
+        - Name: productname
+        - Version: xxx
+        - Release: yyyy
+
+- Environment
+        - OS: Native windows XP-32Bit installation
+	- Preinstalled packages: None (also no aio)
+	- Files used while testing:
+                File1: http://domain.de/file.ext
+
+- Testing process:
+        OPSI-action:
+                - Installation (without dependencies like AIO/Firefox): ??
+        Result:   
+                - File extensions related to program: ??
+                - Start menu entry: ??
+                - Starting/using program: viewer works, File1 is shown correctly: ??
+
+        OPSI-action:
+                - Uninstall
+        Result:
+                - File extensions related to program: unrelated: ??
+                - Start menu entry: none: ??
+
+

builder-product.cfg

@@ -0,0 +1,31 @@
+############################
+# Setup product information 
+############################
+VENDOR="peazip.org"
+PN="peazip"
+VERSION="4.4"
+RELEASE="3"
+PRIORITY="0"
+ADVICE=""
+
+# TYPE - defines, if the install files are public or restricted. 
+# Valid value: restricted | public
+TYPE="public"
+
+
+DL_FILE[0]="PEAZIP.png"
+DL_SOURCE[0]="http://1.bp.blogspot.com/_oAFwttooi5c/TTPirQSH87I/AAAAAAAAAz8/oHe0fGs4x5M/s320/PEAZIP.png"
+
+DL_FILE[1]="peazip-${VERSION}.WINDOWS.exe"
+DL_SOURCE[1]="http://downloads.sourceforge.net/peazip/peazip-${VERSION}.WINDOWS.exe"
+DL_ARCH[1]="X86"
+DL_WINST_NAME[1]=Install32Exe
+
+DL_FILE[2]="peazip-${VERSION}.WIN64.exe"
+DL_SOURCE[2]="http://downloads.sourceforge.net/peazip/peazip-${VERSION}.WIN64.exe"
+DL_ARCH[2]="X86_64"
+DL_WINST_NAME[2]=Install64Exe
+
+# File array index for the image showing while installing the program
+ICON_DL_INDEX=0
+

builder-targets-cb.sh

@@ -0,0 +1,25 @@
+##############################################################################
+# This optional file "builder-targets-cb.sh" will be called by builder.sh 
+# 
+# The targets will be called from thde opsi-builder using the following
+# order: config, prepare, retrieve, create, package, publish, commit, cleanup 
+# You can overwrite the target functions in builder-targets-cb.sh
+# 
+# You can define callback functions. The functions are called from
+# opsi-builder within processing a target
+#   cb_package_makeproductfile
+#
+# You can use every variable defined in any configuration file or by
+# the defined builder script itself. Also, calling the predefined
+# targets builder_<targetname> is possible.
+#
+# Abstract:
+#  target order: config, prepare, retrieve, create, package, publish, commit, cleanup
+#  callbacks: <none>
+#
+##############################################################################
+
+function cleanup() {
+    echo "Cleanup"
+    builder_cleanup
+}

peazip-4.4.WIN64.exe.sha1sum

@@ -0,0 +1 @@
+c5b94e2bbd550c97d7fdb1cff006f8b4dc4945a8  /home/mario/.opsi-dist-cache/peazip-4.4/X86_64/peazip-4.4.WIN64.exe

peazip-4.4.WINDOWS.exe.sha1sum

@@ -0,0 +1 @@
+ab74dce200040b017aaa176ab77768af4d4aea87  /home/mario/.opsi-dist-cache/peazip-4.4/X86/peazip-4.4.WINDOWS.exe