570 lines
18 KiB
Diff
570 lines
18 KiB
Diff
|
diff -uprN linux-3.4-rc7/arch/arm/configs/orion5x_defconfig linux-3.4-rc7-wtgl/arch/arm/configs/orion5x_defconfig
|
||
|
--- linux-3.4-rc7/arch/arm/configs/orion5x_defconfig 2012-05-12 19:37:47.000000000 -0600
|
||
|
+++ linux-3.4-rc7-wtgl/arch/arm/configs/orion5x_defconfig 2012-08-16 23:41:47.118502384 -0600
|
||
|
@@ -19,6 +19,7 @@ CONFIG_MACH_TS209=y
|
||
|
CONFIG_MACH_TERASTATION_PRO2=y
|
||
|
CONFIG_MACH_LINKSTATION_PRO=y
|
||
|
CONFIG_MACH_LINKSTATION_MINI=y
|
||
|
+CONFIG_MACH_LINKSTATION_PRODUO=y
|
||
|
CONFIG_MACH_LINKSTATION_LS_HGL=y
|
||
|
CONFIG_MACH_TS409=y
|
||
|
CONFIG_MACH_WRT350N_V2=y
|
||
|
diff -uprN linux-3.4-rc7/arch/arm/mach-orion5x/Kconfig linux-3.4-rc7-wtgl/arch/arm/mach-orion5x/Kconfig
|
||
|
--- linux-3.4-rc7/arch/arm/mach-orion5x/Kconfig 2012-05-12 19:37:47.000000000 -0600
|
||
|
+++ linux-3.4-rc7-wtgl/arch/arm/mach-orion5x/Kconfig 2012-08-16 23:47:02.334496150 -0600
|
||
|
@@ -65,13 +65,52 @@ config MACH_LINKSTATION_MINI
|
||
|
Say 'Y' here if you want your kernel to support the
|
||
|
Buffalo Linkstation Mini platform.
|
||
|
|
||
|
+config MACH_LINKSTATION_PRODUO
|
||
|
+ bool "Buffalo Linkstation Pro Duo"
|
||
|
+ select I2C_BOARDINFO
|
||
|
+ help
|
||
|
+ Say 'Y' here if you want your kernel to support the
|
||
|
+ Buffalo Linkstation Pro Duo platform.
|
||
|
+
|
||
|
+ LS-W1.0TGL/R1 is the general model number. There
|
||
|
+ is no /R3 models, as /R1 stands for RAID1.
|
||
|
+ There are two hardware revisions of the product.
|
||
|
+
|
||
|
+ The first revision has version 1.xx firmware, 64 MB RAM,
|
||
|
+ a single USB port, a power BUTTON, an Auto/Manual
|
||
|
+ power MODE SWITCH, and a RESET button.
|
||
|
+
|
||
|
+ The second revision has version 3.xx firmware, 128 MB RAM,
|
||
|
+ two USB ports, an Off/On/Auto power SWITCH, and a FUNCTION button.
|
||
|
+
|
||
|
+ choice
|
||
|
+ prompt "HW model"
|
||
|
+ depends on MACH_LINKSTATION_PRODUO
|
||
|
+ default MACH_LINKSTATION_PRODUO_REV1
|
||
|
+ default MACH_LINKSTATION_PRODUO_REV2
|
||
|
+
|
||
|
+ config MACH_LINKSTATION_PRODUO_REV1
|
||
|
+ bool "Revision 1"
|
||
|
+ help
|
||
|
+ The first revision has version 1.xx firmware, 64 MB RAM,
|
||
|
+ a single USB port, a power BUTTON, an Auto/Manual
|
||
|
+ power MODE SWITCH, and a RESET button.
|
||
|
+
|
||
|
+ config MACH_LINKSTATION_PRODUO_REV2
|
||
|
+ bool "Revision 2"
|
||
|
+ help
|
||
|
+ The second revision has version 3.xx firmware, 128 MB RAM,
|
||
|
+ two USB ports, an Off/On/Auto power SWITCH, and a FUNCTION button.
|
||
|
+ endchoice
|
||
|
+
|
||
|
+
|
||
|
config MACH_LINKSTATION_LS_HGL
|
||
|
bool "Buffalo Linkstation LS-HGL"
|
||
|
select I2C_BOARDINFO
|
||
|
help
|
||
|
Say 'Y' here if you want your kernel to support the
|
||
|
Buffalo Linkstation LS-HGL platform.
|
||
|
-
|
||
|
+
|
||
|
config MACH_TS409
|
||
|
bool "QNAP TS-409"
|
||
|
help
|
||
|
diff -uprN linux-3.4-rc7/arch/arm/mach-orion5x/Makefile linux-3.4-rc7-wtgl/arch/arm/mach-orion5x/Makefile
|
||
|
--- linux-3.4-rc7/arch/arm/mach-orion5x/Makefile 2012-05-12 19:37:47.000000000 -0600
|
||
|
+++ linux-3.4-rc7-wtgl/arch/arm/mach-orion5x/Makefile 2012-08-16 23:48:26.182494492 -0600
|
||
|
@@ -5,6 +5,7 @@ obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobo
|
||
|
obj-$(CONFIG_MACH_TERASTATION_PRO2) += terastation_pro2-setup.o
|
||
|
obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
|
||
|
obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o
|
||
|
+obj-$(CONFIG_MACH_LINKSTATION_PRODUO) += lsproduo-setup.o
|
||
|
obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
|
||
|
obj-$(CONFIG_MACH_DNS323) += dns323-setup.o
|
||
|
obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o
|
||
|
diff -uprN linux-3.4-rc7/arch/arm/mach-orion5x/lsproduo-setup.c linux-3.4-rc7-wtgl/arch/arm/mach-orion5x/lsproduo-setup.c
|
||
|
--- linux-3.4-rc7/arch/arm/mach-orion5x/lsproduo-setup.c 1969-12-31 17:00:00.000000000 -0700
|
||
|
+++ linux-3.4-rc7-wtgl/arch/arm/mach-orion5x/lsproduo-setup.c 2012-08-16 23:52:09.630490073 -0600
|
||
|
@@ -0,0 +1,459 @@
|
||
|
+/*
|
||
|
+ * arch/arm/mach-orion5x/lsproduo-setup.c
|
||
|
+ *
|
||
|
+ * Source taken from arch/arm/mach-orion5x/lsmini-setup.c - kernel 2.6.30
|
||
|
+ * Maintainer: Matt Gomboc <gomboc0@gmail.com>
|
||
|
+ *
|
||
|
+ * This file is licensed under the terms of the GNU General Public
|
||
|
+ * License version 2. This program is licensed "as is" without any
|
||
|
+ * warranty of any kind, whether express or implied.
|
||
|
+ */
|
||
|
+
|
||
|
+#include <linux/kernel.h>
|
||
|
+#include <linux/init.h>
|
||
|
+#include <linux/platform_device.h>
|
||
|
+#include <linux/mtd/physmap.h>
|
||
|
+#include <linux/mv643xx_eth.h>
|
||
|
+#include <linux/leds.h>
|
||
|
+#include <linux/gpio_keys.h>
|
||
|
+#include <linux/input.h>
|
||
|
+#include <linux/i2c.h>
|
||
|
+#include <linux/ata_platform.h>
|
||
|
+#include <linux/gpio.h>
|
||
|
+#include <asm/mach-types.h>
|
||
|
+#include <asm/mach/arch.h>
|
||
|
+#include <mach/orion5x.h>
|
||
|
+#include "common.h"
|
||
|
+#include "mpp.h"
|
||
|
+#include <linux/module.h>
|
||
|
+#include <linux/proc_fs.h>
|
||
|
+#include <asm/uaccess.h>
|
||
|
+
|
||
|
+/*****************************************************************************
|
||
|
+ * Linkstation Pro Duo Info
|
||
|
+ ****************************************************************************/
|
||
|
+
|
||
|
+/*
|
||
|
+ * 256K NOR flash Device bus boot chip select
|
||
|
+ */
|
||
|
+
|
||
|
+#define LSPRODUO_NOR_BOOT_BASE 0xf4000000
|
||
|
+#define LSPRODUO_NOR_BOOT_SIZE SZ_256K
|
||
|
+
|
||
|
+/*****************************************************************************
|
||
|
+ * 256KB NOR Flash on BOOT Device
|
||
|
+ ****************************************************************************/
|
||
|
+
|
||
|
+static struct physmap_flash_data lsproduo_nor_flash_data = {
|
||
|
+ .width = 1,
|
||
|
+};
|
||
|
+
|
||
|
+static struct resource lsproduo_nor_flash_resource = {
|
||
|
+ .flags = IORESOURCE_MEM,
|
||
|
+ .start = LSPRODUO_NOR_BOOT_BASE,
|
||
|
+ .end = LSPRODUO_NOR_BOOT_BASE + LSPRODUO_NOR_BOOT_SIZE - 1,
|
||
|
+};
|
||
|
+
|
||
|
+static struct platform_device lsproduo_nor_flash = {
|
||
|
+ .name = "physmap-flash",
|
||
|
+ .id = 0,
|
||
|
+ .dev = {
|
||
|
+ .platform_data = &lsproduo_nor_flash_data,
|
||
|
+ },
|
||
|
+ .num_resources = 1,
|
||
|
+ .resource = &lsproduo_nor_flash_resource,
|
||
|
+};
|
||
|
+
|
||
|
+/*****************************************************************************
|
||
|
+ * Ethernet
|
||
|
+ ****************************************************************************/
|
||
|
+
|
||
|
+static struct mv643xx_eth_platform_data lsproduo_eth_data = {
|
||
|
+ .phy_addr = 8,
|
||
|
+};
|
||
|
+
|
||
|
+/*****************************************************************************
|
||
|
+ * RTC 5C372a on I2C bus
|
||
|
+ ****************************************************************************/
|
||
|
+
|
||
|
+static struct i2c_board_info __initdata lsproduo_i2c_rtc = {
|
||
|
+ I2C_BOARD_INFO("rs5c372a", 0x32),
|
||
|
+};
|
||
|
+
|
||
|
+/*****************************************************************************
|
||
|
+ * LEDs attached to GPIO
|
||
|
+ ****************************************************************************/
|
||
|
+
|
||
|
+#define LSPRODUO_GPIO_LED_ALARM 2
|
||
|
+#define LSPRODUO_GPIO_LED_INFO 3
|
||
|
+#define LSPRODUO_GPIO_LED_PWR 0
|
||
|
+
|
||
|
+#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV2
|
||
|
+ #define LSPRODUO_GPIO_LED_FUNC 18
|
||
|
+#endif
|
||
|
+
|
||
|
+#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV1
|
||
|
+static struct gpio_led lsproduo_led_pins[] = {
|
||
|
+ {
|
||
|
+ .name = "alarm:red",
|
||
|
+ .gpio = LSPRODUO_GPIO_LED_ALARM,
|
||
|
+ .active_low = 1,
|
||
|
+ }, {
|
||
|
+ .name = "info:amber",
|
||
|
+ .gpio = LSPRODUO_GPIO_LED_INFO,
|
||
|
+ .active_low = 1,
|
||
|
+ }, {
|
||
|
+ .name = "power:greem",
|
||
|
+ .gpio = LSPRODUO_GPIO_LED_PWR,
|
||
|
+ .active_low = 1,
|
||
|
+ },
|
||
|
+};
|
||
|
+#endif
|
||
|
+#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV2
|
||
|
+static struct gpio_led lsproduo_led_pins[] = {
|
||
|
+ {
|
||
|
+ .name = "alarm:red",
|
||
|
+ .gpio = LSPRODUO_GPIO_LED_ALARM,
|
||
|
+ .active_low = 1,
|
||
|
+ }, {
|
||
|
+ .name = "info:amber",
|
||
|
+ .gpio = LSPRODUO_GPIO_LED_INFO,
|
||
|
+ .active_low = 1,
|
||
|
+ }, {
|
||
|
+ .name = "power:green",
|
||
|
+ .gpio = LSPRODUO_GPIO_LED_PWR,
|
||
|
+ .active_low = 1,
|
||
|
+ },{
|
||
|
+ .name = "func:blue",
|
||
|
+ .gpio = LSPRODUO_GPIO_LED_FUNC,
|
||
|
+ .active_low = 1,
|
||
|
+ },
|
||
|
+};
|
||
|
+#endif
|
||
|
+
|
||
|
+
|
||
|
+
|
||
|
+static struct gpio_led_platform_data lsproduo_led_data = {
|
||
|
+ .leds = lsproduo_led_pins,
|
||
|
+ .num_leds = ARRAY_SIZE(lsproduo_led_pins),
|
||
|
+};
|
||
|
+
|
||
|
+static struct platform_device lsproduo_leds = {
|
||
|
+ .name = "leds-gpio",
|
||
|
+ .id = -1,
|
||
|
+ .dev = {
|
||
|
+ .platform_data = &lsproduo_led_data,
|
||
|
+ },
|
||
|
+};
|
||
|
+
|
||
|
+/****************************************************************************
|
||
|
+ * GPIO Attached Keys
|
||
|
+ ****************************************************************************/
|
||
|
+#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV1
|
||
|
+ #define LSPRODUO_GPIO_KEY_POWER 8
|
||
|
+ #define LSPRODUO_GPIO_KEY_AUTOPOWER 10
|
||
|
+
|
||
|
+ #define LSPRODUO_SW_POWER 0x00
|
||
|
+ #define LSPRODUO_SW_AUTOPOWER 0x01
|
||
|
+
|
||
|
+static struct gpio_keys_button lsproduo_buttons[] = {
|
||
|
+ {
|
||
|
+ .type = EV_SW,
|
||
|
+ .code = LSPRODUO_SW_POWER,
|
||
|
+ .gpio = LSPRODUO_GPIO_KEY_POWER,
|
||
|
+ .desc = "Power-on Switch",
|
||
|
+ .active_low = 1,
|
||
|
+ }, {
|
||
|
+ .type = EV_SW,
|
||
|
+ .code = LSPRODUO_SW_AUTOPOWER,
|
||
|
+ .gpio = LSPRODUO_GPIO_KEY_AUTOPOWER,
|
||
|
+ .desc = "Power-auto Switch",
|
||
|
+ .active_low = 1,
|
||
|
+ },
|
||
|
+};
|
||
|
+
|
||
|
+#endif
|
||
|
+#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV2
|
||
|
+ #define LSPRODUO_GPIO_KEY_POWER 10
|
||
|
+ #define LSPRODUO_GPIO_KEY_AUTOPOWER 22
|
||
|
+ #define LSPRODUO_GPIO_KEY_FUNC 8
|
||
|
+
|
||
|
+ #define LSPRODUO_SW_POWER 0x00
|
||
|
+ #define LSPRODUO_SW_AUTOPOWER 0x01
|
||
|
+
|
||
|
+static struct gpio_keys_button lsproduo_buttons[] = {
|
||
|
+ {
|
||
|
+ .code = KEY_OPTION,
|
||
|
+ .gpio = LSPRODUO_GPIO_KEY_FUNC,
|
||
|
+ .desc = "Function Button",
|
||
|
+ .active_low = 1,
|
||
|
+ },{
|
||
|
+ .type = EV_SW,
|
||
|
+ .code = LSPRODUO_SW_POWER,
|
||
|
+ .gpio = LSPRODUO_GPIO_KEY_POWER,
|
||
|
+ .desc = "Power-on Switch",
|
||
|
+ .active_low = 1,
|
||
|
+ }, {
|
||
|
+ .type = EV_SW,
|
||
|
+ .code = LSPRODUO_SW_AUTOPOWER,
|
||
|
+ .gpio = LSPRODUO_GPIO_KEY_AUTOPOWER,
|
||
|
+ .desc = "Power-auto Switch",
|
||
|
+ .active_low = 1,
|
||
|
+ },
|
||
|
+};
|
||
|
+
|
||
|
+#endif
|
||
|
+
|
||
|
+static struct gpio_keys_platform_data lsproduo_button_data = {
|
||
|
+ .buttons = lsproduo_buttons,
|
||
|
+ .nbuttons = ARRAY_SIZE(lsproduo_buttons),
|
||
|
+};
|
||
|
+
|
||
|
+static struct platform_device lsproduo_button_device = {
|
||
|
+ .name = "gpio-keys",
|
||
|
+ .id = -1,
|
||
|
+ .num_resources = 0,
|
||
|
+ .dev = {
|
||
|
+ .platform_data = &lsproduo_button_data,
|
||
|
+ },
|
||
|
+};
|
||
|
+
|
||
|
+/****************************************************************************
|
||
|
+ * GPIO Attached Fan
|
||
|
+ ****************************************************************************/
|
||
|
+
|
||
|
+/* Define max char len */
|
||
|
+#define MAX_LEN 8
|
||
|
+
|
||
|
+#define LSPRODUO_GPIO_FAN_LOW 17
|
||
|
+#define LSPRODUO_GPIO_FAN_HIGH 14
|
||
|
+
|
||
|
+static struct proc_dir_entry *lsproduo_proc_dir_root, *lsproduo_proc_dir_gpio, *lsproduo_fan_proc_file;
|
||
|
+static char lsproduo_fan_state[MAX_LEN];
|
||
|
+
|
||
|
+static int lsproduo_fan_get(char *buf, char **start, off_t offset, int count, int *eof, void *data)
|
||
|
+{
|
||
|
+ int len;
|
||
|
+
|
||
|
+ len = snprintf(buf, count, "state: %s\n", lsproduo_fan_state);
|
||
|
+ return len;
|
||
|
+}
|
||
|
+
|
||
|
+static int lsproduo_fan_set( struct file *file, const char *buffer, unsigned long count, void *data )
|
||
|
+{
|
||
|
+ int len, ret;
|
||
|
+ char *ptr, tState[MAX_LEN];
|
||
|
+
|
||
|
+ if (count > MAX_LEN )
|
||
|
+ len = MAX_LEN;
|
||
|
+ else
|
||
|
+ len = count;
|
||
|
+
|
||
|
+ ret = copy_from_user(tState, buffer, len);
|
||
|
+ if(ret < 0)
|
||
|
+ {
|
||
|
+ printk(KERN_ERR "%s: Setting fan speed failed\n", "lsproduo");
|
||
|
+ return -EFAULT;
|
||
|
+ }
|
||
|
+
|
||
|
+ ptr = strrchr(tState, '\n');
|
||
|
+ if(ptr) *ptr = '\0';
|
||
|
+
|
||
|
+ if (strcasecmp(tState, "off") == 0)
|
||
|
+ {
|
||
|
+ printk(KERN_DEBUG "%s: set fan off\n", "lsproduo");
|
||
|
+ sprintf(lsproduo_fan_state, "off");
|
||
|
+ gpio_set_value(LSPRODUO_GPIO_FAN_LOW, 1);
|
||
|
+ gpio_set_value(LSPRODUO_GPIO_FAN_HIGH, 1);
|
||
|
+ } else if (strcasecmp(tState, "slow") == 0)
|
||
|
+ {
|
||
|
+ printk(KERN_DEBUG "%s: set fan slow\n", "lsproduo");
|
||
|
+ sprintf(lsproduo_fan_state, "slow");
|
||
|
+ gpio_set_value(LSPRODUO_GPIO_FAN_LOW, 1);
|
||
|
+ gpio_set_value(LSPRODUO_GPIO_FAN_HIGH, 0);
|
||
|
+ } else if (strcasecmp(tState, "fast") == 0)
|
||
|
+ {
|
||
|
+ printk(KERN_DEBUG "%s: set fan fast\n", "lsproduo");
|
||
|
+ sprintf(lsproduo_fan_state, "fast");
|
||
|
+ gpio_set_value(LSPRODUO_GPIO_FAN_LOW, 0);
|
||
|
+ gpio_set_value(LSPRODUO_GPIO_FAN_HIGH, 1);
|
||
|
+ } else if (strcasecmp(tState, "full") == 0)
|
||
|
+ {
|
||
|
+ printk(KERN_DEBUG "%s: set fan full\n", "lsproduo");
|
||
|
+ sprintf(lsproduo_fan_state, "full");
|
||
|
+ gpio_set_value(LSPRODUO_GPIO_FAN_LOW, 0);
|
||
|
+ gpio_set_value(LSPRODUO_GPIO_FAN_HIGH, 0);
|
||
|
+ } else
|
||
|
+ {
|
||
|
+ printk(KERN_ERR "%s: unknown fan speed given\n", "lsproduo");
|
||
|
+ }
|
||
|
+
|
||
|
+ lsproduo_fan_state[len] = '\0';
|
||
|
+
|
||
|
+ return len;
|
||
|
+}
|
||
|
+
|
||
|
+/*****************************************************************************
|
||
|
+ * SATA
|
||
|
+ ****************************************************************************/
|
||
|
+static struct mv_sata_platform_data lsproduo_sata_data = {
|
||
|
+ .n_ports = 2,
|
||
|
+};
|
||
|
+
|
||
|
+
|
||
|
+/*****************************************************************************
|
||
|
+ * Linkstation Pro Duo specific power off method: reboot
|
||
|
+ ****************************************************************************/
|
||
|
+/*
|
||
|
+ * On the Linkstation Pro Duo, the shutdown process is following:
|
||
|
+ * - Userland monitors key events until the power switch goes to off position
|
||
|
+ * - The board reboots
|
||
|
+ * - U-boot starts and goes into an idle mode waiting for the user
|
||
|
+ * to move the switch to ON position
|
||
|
+ */
|
||
|
+
|
||
|
+static void lsproduo_power_off(void)
|
||
|
+{
|
||
|
+ /* orion5x_restart('h', NULL); */
|
||
|
+ arm_machine_restart(0, NULL);
|
||
|
+}
|
||
|
+
|
||
|
+
|
||
|
+/*****************************************************************************
|
||
|
+ * General Setup
|
||
|
+ ****************************************************************************/
|
||
|
+#define LSPRODUO_GPIO_HDD_POWER0 1
|
||
|
+#define LSPRODUO_GPIO_USB_POWER 9
|
||
|
+#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV1
|
||
|
+ #define LSPRODUO_GPIO_POWER 8
|
||
|
+ #define LSPRODUO_GPIO_AUTO_POWER 10
|
||
|
+#endif
|
||
|
+#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV2
|
||
|
+ #define LSPRODUO_GPIO_POWER 10
|
||
|
+ #define LSPRODUO_GPIO_USB_POWER2 19
|
||
|
+ #define LSPRODUO_GPIO_AUTO_POWER 22
|
||
|
+#endif
|
||
|
+
|
||
|
+static unsigned int lsproduo_mpp_modes[] __initdata = {
|
||
|
+ MPP0_GPIO, /* LED_PWR */
|
||
|
+ MPP1_GPIO, /* HDD_PWR */
|
||
|
+ MPP2_GPIO, /* LED_ALARM */
|
||
|
+ MPP3_GPIO, /* LED_INFO */
|
||
|
+ MPP4_UNUSED,
|
||
|
+ MPP5_UNUSED,
|
||
|
+ MPP6_GPIO, /* FAN_LCK */
|
||
|
+ MPP9_GPIO, /* USB_PWR */
|
||
|
+ MPP11_UNUSED, /* LED_ETH dummy */
|
||
|
+ MPP12_UNUSED,
|
||
|
+ MPP13_UNUSED,
|
||
|
+ MPP14_GPIO, /* FAN_HIGH */
|
||
|
+ MPP15_UNUSED,
|
||
|
+ MPP16_UNUSED,
|
||
|
+ MPP17_GPIO, /* FAN_LOW */
|
||
|
+
|
||
|
+#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV1
|
||
|
+ MPP7_GPIO, /* INIT */
|
||
|
+ MPP8_GPIO, /* POWER */
|
||
|
+ MPP10_GPIO, /* AUTO_POWER */
|
||
|
+ MPP18_UNUSED,
|
||
|
+ MPP19_UNUSED,
|
||
|
+#endif
|
||
|
+#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV2
|
||
|
+ MPP7_UNUSED,
|
||
|
+ MPP8_GPIO, /* FUNC */
|
||
|
+ MPP10_GPIO, /* POWER */
|
||
|
+ MPP18_GPIO, /* LED_FUNC*/
|
||
|
+ MPP19_GPIO, /* USB_PWR2 */
|
||
|
+ MPP22_GPIO, /* AUTO_POWER */
|
||
|
+#endif
|
||
|
+ 0,
|
||
|
+};
|
||
|
+
|
||
|
+static void __init lsproduo_init(void)
|
||
|
+{
|
||
|
+ /*
|
||
|
+ * Setup basic Orion functions. Need to be called early.
|
||
|
+ */
|
||
|
+ orion5x_init();
|
||
|
+
|
||
|
+ orion5x_mpp_conf(lsproduo_mpp_modes);
|
||
|
+
|
||
|
+ /*
|
||
|
+ * Configure peripherals.
|
||
|
+ */
|
||
|
+ orion5x_ehci0_init();
|
||
|
+ orion5x_ehci1_init();
|
||
|
+ orion5x_eth_init(&lsproduo_eth_data);
|
||
|
+ orion5x_i2c_init();
|
||
|
+ orion5x_sata_init(&lsproduo_sata_data);
|
||
|
+ orion5x_uart0_init();
|
||
|
+ orion5x_xor_init();
|
||
|
+
|
||
|
+ orion5x_setup_dev_boot_win(LSPRODUO_NOR_BOOT_BASE,
|
||
|
+ LSPRODUO_NOR_BOOT_SIZE);
|
||
|
+ platform_device_register(&lsproduo_nor_flash);
|
||
|
+
|
||
|
+ platform_device_register(&lsproduo_button_device);
|
||
|
+
|
||
|
+ platform_device_register(&lsproduo_leds);
|
||
|
+
|
||
|
+ i2c_register_board_info(0, &lsproduo_i2c_rtc, 1);
|
||
|
+
|
||
|
+ /* enable USB power */
|
||
|
+ gpio_set_value(LSPRODUO_GPIO_USB_POWER, 1);
|
||
|
+
|
||
|
+#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV2
|
||
|
+ gpio_set_value(LSPRODUO_GPIO_USB_POWER2, 1);
|
||
|
+#endif
|
||
|
+
|
||
|
+ printk(KERN_INFO "Buffalo Linkstation Pro Duo fan driver loaded\n");
|
||
|
+ sprintf(lsproduo_fan_state, "fast");
|
||
|
+ gpio_set_value(LSPRODUO_GPIO_FAN_LOW, 1);
|
||
|
+ gpio_set_value(LSPRODUO_GPIO_FAN_HIGH, 0);
|
||
|
+
|
||
|
+ lsproduo_proc_dir_root = proc_mkdir( "linkstation", NULL );
|
||
|
+ lsproduo_proc_dir_gpio = proc_mkdir( "gpio", lsproduo_proc_dir_root );
|
||
|
+ lsproduo_fan_proc_file = create_proc_entry( "fan", S_IRUGO, lsproduo_proc_dir_gpio );
|
||
|
+ if( lsproduo_fan_proc_file ) {
|
||
|
+ lsproduo_fan_proc_file->read_proc = lsproduo_fan_get;
|
||
|
+ lsproduo_fan_proc_file->write_proc = lsproduo_fan_set;
|
||
|
+ lsproduo_fan_proc_file->data = NULL;
|
||
|
+ } else
|
||
|
+ {
|
||
|
+ printk(KERN_INFO "Registration of fan device failed\n");
|
||
|
+ }
|
||
|
+
|
||
|
+ /* register power-off method */
|
||
|
+ pm_power_off = lsproduo_power_off;
|
||
|
+
|
||
|
+ pr_info("%s: finished\n", __func__);
|
||
|
+}
|
||
|
+
|
||
|
+#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV1
|
||
|
+MACHINE_START(LINKSTATION_PRODUO, "Buffalo Linkstation Pro Duo - Revision 1")
|
||
|
+ .atag_offset = 0x00000100,
|
||
|
+ .init_machine = lsproduo_init,
|
||
|
+ .map_io = orion5x_map_io,
|
||
|
+ .init_early = orion5x_init_early,
|
||
|
+ .init_irq = orion5x_init_irq,
|
||
|
+ .timer = &orion5x_timer,
|
||
|
+ .fixup = tag_fixup_mem32,
|
||
|
+ /* .restart = orion5x_restart, */
|
||
|
+MACHINE_END
|
||
|
+#endif
|
||
|
+
|
||
|
+#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV2
|
||
|
+MACHINE_START(LINKSTATION_PRODUO, "Buffalo Linkstation Pro Duo - Revision 2")
|
||
|
+ .atag_offset = 0x00000100,
|
||
|
+ .init_machine = lsproduo_init,
|
||
|
+ .map_io = orion5x_map_io,
|
||
|
+ .init_early = orion5x_init_early,
|
||
|
+ .init_irq = orion5x_init_irq,
|
||
|
+ .timer = &orion5x_timer,
|
||
|
+ .fixup = tag_fixup_mem32,
|
||
|
+ /* .restart = orion5x_restart, */
|
||
|
+MACHINE_END
|
||
|
+#endif
|
||
|
+
|
||
|
+
|
||
|
+
|
||
|
diff -uprN linux-3.4-rc7/arch/arm/mach-orion5x/mpp.h linux-3.4-rc7-wtgl/arch/arm/mach-orion5x/mpp.h
|
||
|
--- linux-3.4-rc7/arch/arm/mach-orion5x/mpp.h 2012-05-12 19:37:47.000000000 -0600
|
||
|
+++ linux-3.4-rc7-wtgl/arch/arm/mach-orion5x/mpp.h 2012-08-16 22:15:34.000000000 -0600
|
||
|
@@ -122,7 +122,10 @@
|
||
|
#define MPP19_GIGE MPP(19, 0x1, 0, 0, 1, 1, 1)
|
||
|
#define MPP19_UART MPP(19, 0x0, 0, 0, 0, 1, 1)
|
||
|
|
||
|
-#define MPP_MAX 19
|
||
|
+#define MPP22_GPIO MPP(22, 0x5, 1, 1, 0, 1, 0)
|
||
|
+
|
||
|
+
|
||
|
+#define MPP_MAX 22
|
||
|
|
||
|
void orion5x_mpp_conf(unsigned int *mpp_list);
|
||
|
|
||
|
diff -uprN linux-3.4-rc7/arch/arm/tools/mach-types linux-3.4-rc7-wtgl/arch/arm/tools/mach-types
|
||
|
--- linux-3.4-rc7/arch/arm/tools/mach-types 2012-05-12 19:37:47.000000000 -0600
|
||
|
+++ linux-3.4-rc7-wtgl/arch/arm/tools/mach-types 2012-08-16 23:43:59.830499760 -0600
|
||
|
@@ -333,6 +333,8 @@ smdkc100 MACH_SMDKC100 SMDKC100 1826
|
||
|
tavorevb MACH_TAVOREVB TAVOREVB 1827
|
||
|
saar MACH_SAAR SAAR 1828
|
||
|
at91sam9m10g45ek MACH_AT91SAM9M10G45EK AT91SAM9M10G45EK 1830
|
||
|
+linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831
|
||
|
+##see header for btaining a new version, preferred to patching
|
||
|
usb_a9g20 MACH_USB_A9G20 USB_A9G20 1841
|
||
|
mxlads MACH_MXLADS MXLADS 1851
|
||
|
linkstation_mini MACH_LINKSTATION_MINI LINKSTATION_MINI 1858
|