archie/tcl-dp/generic/dpIPM.c
2024-05-27 16:13:40 +02:00

1044 lines
28 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* dpIPM.c --
*
* This file implements the generic code for an IP multicasting
* channel driver. These are channels that are created by
* evaluating "dp_connect ipm".
*
* Copyright (c) 1995-1996 Cornell University.
*
* See the file "license.terms" for information on usage and redistribution
* of this file, and for a DISCLAIMER OF ALL WARRANTIES.
*
*/
#include "generic/dpInt.h"
#ifndef IN_MULTICAST
/*
* This just checks to make sure the IP address is a valid
* IP multicast address: 224.0.0.0 < addr < 239.255.255.255
*/
#define IN_MULTICAST(i) (((i) & 0xf0000000) == 0xe0000000)
#endif
/*
* The default send and receive buffer size.
*/
#define DP_IPM_SENDBUFSIZE 8192
#define DP_IPM_RECVBUFSIZE 8192
typedef SocketState IpmState;
#define PEEK_MODE (1<<1) /* Read without consuming? */
#define ASYNC_CONNECT (1<<2) /* Asynchronous connection? */
#define IS_SERVER (1<<3) /* Is this a server Ipm socket? */
/*
* Procedures that are used in this file only.
*/
static IpmState * CreateIPMSocket _ANSI_ARGS_((Tcl_Interp *interp,
int ipAddr, int port, int ttl));
static int IpmBlockMode _ANSI_ARGS_((ClientData instanceData,
int mode));
static int IpmInput _ANSI_ARGS_((ClientData instanceData,
char *buf, int bufSize, int *errorCodePtr));
static int IpmOutput _ANSI_ARGS_((ClientData instanceData,
char *buf, int toWrite, int *errorCodePtr));
static int IpmClose _ANSI_ARGS_((ClientData instanceData,
Tcl_Interp *interp));
static int IpmSetOption _ANSI_ARGS_((ClientData instanceData,
Tcl_Interp *interp, char *optionName,
char *optionValue));
static int IpmGetOption _ANSI_ARGS_((ClientData instanceData,
char *optionName, Tcl_DString *dsPtr));
static void IpmWatch _ANSI_ARGS_((ClientData instanceData,
int mask));
static int IpmReady _ANSI_ARGS_((ClientData instanceData,
int mask));
static Tcl_File IpmGetFile _ANSI_ARGS_((ClientData instanceData,
int direction));
static Tcl_ChannelType ipmChannelType = {
"ipm", /* Name of channel */
IpmBlockMode, /* Proc to set blocking mode on socket */
IpmClose, /* Proc to close a socket */
IpmInput, /* Proc to get input from a socket */
IpmOutput, /* Proc to send output to a socket */
NULL, /* Can't seek on a socket! */
IpmSetOption, /* Proc to set a socket option */
IpmGetOption, /* Proc to set a socket option */
IpmWatch, /* Proc called to set event loop wait params */
IpmReady, /* Proc called to check if socket has input */
IpmGetFile /* Proc to return a handle assoc with socket */
};
static int ipmCount = 0; /* Number of ipm files opened -- used to
* generate unique ids for channels */
/*
*--------------------------------------------------------------
*
* DpOpenIpmChannel --
*
* Opens a new channel that uses the IPM protocol.
*
* Results:
* Returns a pointer to the newly created Tcl_Channel. This
* is the structure with all the function pointers Tcl needs
* to communicate with (read, write, close, etc) the channel.
*
* Side effects:
* A socket is created with the specified port. No other
* socket can use that port until this channel is closed.
*
*--------------------------------------------------------------
*/
Tcl_Channel
DpOpenIpmChannel(interp, argc, argv)
Tcl_Interp *interp; /* For error reporting; can be NULL. */
int argc; /* Number of arguments. */
char **argv; /* Argument strings. */
{
#ifdef NO_MULTICAST_DEF
Tcl_AppendResult(interp, "IP multicast is not available on this system",
NULL);
return NULL;
#else
Tcl_Channel chan;
IpmState *statePtr = NULL;
char channelName[20];
char *groupName, *str;
char **av;
int i, ac;
/*
* The default values for the value-option pairs
*/
int ipAddr = 0;
int port = 0;
int ttl = 1;
/*
* Flags to indicate that a certain option has been set by the
* command line
*/
int setGroup = 0;
int setPort = 0;
for (i=0; i<argc; i+=2) {
int v = i+1;
size_t len = strlen(argv[i]);
if (strncmp(argv[i], "-group", len)==0) {
if (v==argc) {goto arg_missing;}
if (!DpHostToIpAddr(argv[v], &ipAddr)) {
Tcl_AppendResult (interp, "Illegal value for -group \"",
argv[v], "\"", NULL);
return NULL;
}
groupName = argv[v];
setGroup = 1;
} else if (strncmp(argv[i], "-myport", len)==0) {
if (v==argc) {goto arg_missing;}
if (Tcl_GetInt(interp, argv[v], &port) != TCL_OK) {
return NULL;
}
if (port < 0) {
Tcl_AppendResult(interp, "expected non-negative integer ",
"but got \"", argv[v], "\"", NULL);
return NULL;
}
setPort = 1;
} else if (strncmp(argv[i], "-ttl", len)==0) {
if (v==argc) {goto arg_missing;}
if (Tcl_GetInt(interp, argv[v], &ttl) != TCL_OK) {
return NULL;
}
} else {
Tcl_AppendResult(interp, "unknown option \"",
argv[i], "\", must be -group, ",
"-myport or -ttl", NULL);
return NULL;
}
}
/*
* Check the options that must or must not be specified, depending on
* the -server option.
*/
if (!setGroup) {
Tcl_AppendResult(interp, "option -group must be specified",
NULL);
return NULL;
}
if (!setPort) {
Tcl_AppendResult(interp, "option -myport must be specified",
NULL);
return NULL;
}
/*
* Create a new socket and wrap it in a channel.
*/
statePtr = CreateIPMSocket(interp, ipAddr, port, ttl);
if (statePtr == NULL) {
return NULL;
}
sprintf(channelName, "ipm%d", ipmCount++);
chan = Tcl_CreateChannel(&ipmChannelType, channelName,
(ClientData)statePtr, TCL_READABLE|TCL_WRITABLE);
Tcl_RegisterChannel(interp, chan);
ac = 1;
av = &groupName;
str = Tcl_Merge(ac, av);
Tcl_DStringAppendElement(&statePtr->groupList, str);
ckfree(str);
if (Tcl_SetChannelOption(interp, chan, "-translation", "binary") !=
TCL_OK) {
DpClose(interp, chan);
ckfree((char *)statePtr);
return NULL;
}
if (Tcl_SetChannelOption(interp, chan, "-blocking", "1") !=
TCL_OK) {
DpClose(interp, chan);
ckfree((char *)statePtr);
return NULL;
}
if (Tcl_SetChannelOption(interp, chan, "-buffering", "none") !=
TCL_OK) {
DpClose(interp, chan);
ckfree((char *)statePtr);
return NULL;
}
return chan;
arg_missing:
Tcl_AppendResult(interp, "value for \"", argv[argc-1], "\" missing", NULL);
return NULL;
#endif
}
/*
*--------------------------------------------------------------
*
* IpmBlockMode --
*
* Sets the ipm socket to blocking or non-blocking. Just
* a wrapper around the platform specific function.
*
* Results:
* Zero if the operation was successful, or a nonzero POSIX
* error code if the operation failed.
*
* Side effects:
* None
*
*--------------------------------------------------------------
*/
static int
IpmBlockMode (instanceData, mode)
ClientData instanceData; /* Pointer to ipmState struct */
int mode; /* TCL_MODE_BLOCKING or TCL_MODE_NONBLOCKING */
{
IpmState *statePtr = (IpmState *)instanceData;
if (mode == TCL_MODE_BLOCKING) {
return DpIpmSetSocketOption(statePtr, DP_BLOCK, 1);
} else {
return DpIpmSetSocketOption(statePtr, DP_BLOCK, 0);
}
}
/*
*--------------------------------------------------------------
*
* IpmClose --
*
* This function is called by the Tcl channel driver when the
* caller want to close the socket. It releases the instanceData
* and closes the scoket All queued output will have been flushed
* to the device before this function is called.
*
* Results:
* Zero for success, otherwise a nonzero POSIX error code and,
* if interp is not NULL, an error message in interp->result
*
* Side effects:
* None
*
*--------------------------------------------------------------
*/
static int
IpmClose (instanceData, interp)
ClientData instanceData; /* (in) Pointer to ipmState struct */
Tcl_Interp *interp; /* (in) For error reporting */
{
IpmState *statePtr = (IpmState *)instanceData;
int result;
result = DppCloseSocket(statePtr->sock);
if ((result != 0) && (interp != NULL)) {
DppGetErrno();
Tcl_SetResult(interp, Tcl_PosixError(interp), TCL_STATIC);
}
Tcl_DStringFree(&statePtr->groupList);
ckfree((char *)statePtr);
return result;
}
/*
*--------------------------------------------------------------
*
* IpmInput --
*
* This function is called by the Tcl channel driver whenever the
* user wants to get input from the IPM socket. If the socket
* has some data available but less than requested by the bufSize
* argument, we only read as much data as is available and return
* without blocking. If the socket has no data available
* whatsoever and is blocking, we block until at least one byte
* of data can be read from the socket.
*
* Results:
* A nonnegative integer indicating how many bytes were read, or
* DP_SOCKET_ERROR in case of error (with errorCodePtr set to the
* POSIX error code).
*
* Side effects:
* None
*
*--------------------------------------------------------------
*/
static int
IpmInput(instanceData, buf, bufSize, errorCodePtr)
ClientData instanceData; /* (in) Pointer to ipmState struct */
char *buf; /* (in/out) Buffer to fill */
int bufSize; /* (in) Size of buffer */
int *errorCodePtr; /* (out) POSIX error code (if any) */
{
IpmState *statePtr = (IpmState *)instanceData;
DpSocketAddressIP fromAddr;
int bytesRead, fromLen;
unsigned int fromHost, fromPort;
char str[64];
fromLen = sizeof(fromAddr);
bytesRead = recvfrom(statePtr->sock, buf, bufSize, 0,
(struct sockaddr *)&fromAddr, &fromLen);
if (bytesRead == DP_SOCKET_ERROR) {
*errorCodePtr = DppGetErrno();
return -1;
}
if (statePtr->interp != NULL) {
fromHost = ntohl(fromAddr.sin_addr.s_addr);
fromPort = ntohs(fromAddr.sin_port);
sprintf (str, "{%d.%d.%d.%d %d}", (fromHost>>24),
(fromHost>>16) & 0xFF, (fromHost>>8) & 0xFF, fromHost & 0xFF,
fromPort);
Tcl_SetVar(statePtr->interp, "dp_from", str, TCL_GLOBAL_ONLY);
}
return bytesRead;
}
/*
*--------------------------------------------------------------
*
* IpmOutput --
*
* This function is called by the Tcl channel driver whenever the
* user wants to send output to the IPM socket. The function
* writes toWrite bytes from buf to the socket.
*
* Results:
* On success, returns a nonnegative integer indicating how many
* bytes were written to the socket. The return value is normally
* the same as toWrite, but may be less in some cases such as if
* the output operation is interrupted by a signal.
*
* On failure, returns DP_SOCKET_ERROR;
*
* Side effects:
* None
*
*--------------------------------------------------------------
*/
static int
IpmOutput (instanceData, buf, toWrite, errorCodePtr)
ClientData instanceData; /* (in) Pointer to ipmState struct */
char *buf; /* (in) Buffer to write */
int toWrite; /* (in) Number of bytes to write */
int *errorCodePtr; /* (out) POSIX error code (if any) */
{
IpmState *statePtr = (IpmState *)instanceData;
int result;
result = sendto(statePtr->sock, buf, toWrite, 0,
(struct sockaddr *)&statePtr->sockaddr,
sizeof(statePtr->sockaddr));
if (result == DP_SOCKET_ERROR) {
*errorCodePtr = DppGetErrno();
return -1;
}
return result;
}
/*
*--------------------------------------------------------------
*
* IpmSetOption --
*
* This function is called by the Tcl channel driver
* whenever Tcl evaluates and fconfigure call to set
* some property of the ipm socket (e.g., the buffer
* size). The valid options are "sendBuffer" and
* "recvBuffer"
*
* Results:
* Standard Tcl return value.
*
* Side effects:
* Depends on the option. Generally changes the maximum
* message size that can be sent/received.
*
*--------------------------------------------------------------
*/
static int
IpmSetOption (instanceData, interp, optionName, optionValue)
ClientData instanceData;
Tcl_Interp *interp;
char *optionName;
char *optionValue;
{
int option;
int value;
char c;
int rc;
IpmState *statePtr = (IpmState *)instanceData;
/*
* Set the option specified by optionName
*/
if (optionName[0] == '-') {
option = DpTranslateOption(optionName+1);
} else {
option = -1;
}
switch (option) {
case DP_REUSEADDR:
if (Tcl_GetBoolean(interp, optionValue, &value) != TCL_OK) {
return TCL_ERROR;
}
return DpIpmSetSocketOption(statePtr, option, value);
case DP_RECV_BUFFER_SIZE:
case DP_SEND_BUFFER_SIZE:
if (Tcl_GetInt(interp, optionValue, &value) != TCL_OK) {
return TCL_ERROR;
}
if (value <=0) {
Tcl_AppendResult(interp, "Buffer size must be > 0", NULL);
return TCL_ERROR;
}
return DpIpmSetSocketOption(statePtr, option, value);
case DP_GROUP:
c = optionValue[0];
if (c != '+' && c != '-') {
Tcl_AppendResult (interp, "Expected an add/drop token. ",
"Please see docs on how to add/drop a group.", NULL);
return TCL_ERROR;
}
if (DpHostToIpAddr (&optionValue[1], &value) == 0) {
Tcl_AppendResult (interp,
"Expected IP address or hostname but got \"",
optionValue, "\"", NULL);
return TCL_ERROR;
}
if (c == '+') {
option = DP_ADD_MEMBERSHIP;
} else {
option = DP_DROP_MEMBERSHIP;
}
rc = DpIpmSetSocketOption(statePtr, option, value);
if (rc == 0) {
/*
* Update the group list
*/
if (option == DP_ADD_MEMBERSHIP) {
Tcl_DStringAppendElement(&statePtr->groupList,
&optionValue[1]);
} else {
int argc, i, j = 0;
char **argv;
Tcl_SplitList(interp,
Tcl_DStringValue(&statePtr->groupList),
&argc, &argv);
for (i=0;i<argc;i++) {
if (!strcmp(argv[i], &optionValue[1])) {
while (i<argc) {
argv[i] = argv[i+1];
i++;
}
j = 1;
break;
}
}
if (!j) {
Tcl_AppendResult(interp, "Group address not found",
"in list", NULL);
return TCL_ERROR;
} else {
Tcl_DStringFree(&statePtr->groupList);
Tcl_DStringInit(&statePtr->groupList);
Tcl_DStringAppend(&statePtr->groupList,
Tcl_Merge(argc-1, argv), -1);
}
}
}
return rc;
case DP_MULTICAST_LOOP:
#ifdef _WIN32
Tcl_AppendResult(interp, "Loopback may not be turned off in Windows.",
NULL);
return TCL_ERROR;
#else
if (Tcl_GetInt(interp, optionValue, &value) != TCL_OK) {
return TCL_ERROR;
}
return DpIpmSetSocketOption(statePtr, DP_MULTICAST_LOOP, value);
#endif
case DP_MYPORT:
Tcl_AppendResult(interp, "Port may not be changed",
" after creation.", NULL);
return TCL_ERROR;
default:
Tcl_AppendResult (interp, "bad option \"", optionName,
"\": must be -recvBuffer, -reuseAddr, -group, ",
"-sendBuffer or a standard fconfigure option", NULL);
return TCL_ERROR;
}
}
/*
*--------------------------------------------------------------
*
* IpmGetOption --
*
* This function is called by the Tcl channel code to
* retrieve a parameter of the socket (e.g., a buffer size).
* The valid options are "sendBuffer" and "recvBuffer"
*
* Results:
* A standard Tcl result
*
* Side effects:
* None
*
*--------------------------------------------------------------
*/
static int
IpmGetOption (instanceData,
optionName, dsPtr)
ClientData instanceData;
char *optionName;
Tcl_DString *dsPtr;
{
int option;
unsigned int value = 0xFFFFFFFF;
char str[256];
IpmState *statePtr = (IpmState *)instanceData;
/*
* If optionName is NULL, then return all options in option-value
* pairs.
*/
if (optionName == NULL) {
Tcl_DStringAppend (dsPtr, " -recvBuffer ", -1);
IpmGetOption(instanceData, "-recvBuffer", dsPtr);
Tcl_DStringAppend (dsPtr, " -reuseAddr ", -1);
IpmGetOption(instanceData, "-reuseAddr", dsPtr);
Tcl_DStringAppend (dsPtr, " -sendBuffer ", -1);
IpmGetOption(instanceData, "-sendBuffer", dsPtr);
Tcl_DStringAppend (dsPtr, " -loopback ", -1);
IpmGetOption(instanceData, "-loopback", dsPtr);
Tcl_DStringAppend (dsPtr, " -group ", -1);
IpmGetOption(instanceData, "-group", dsPtr);
Tcl_DStringAppend (dsPtr, " -myport ", -1);
IpmGetOption(instanceData, "-myport", dsPtr);
return TCL_OK;
}
/*
* Retrive the value of the option specified by optionName
*/
if (optionName[0] == '-') {
option = DpTranslateOption(&optionName[1]);
} else {
option = -1;
}
switch (option) {
case DP_RECV_BUFFER_SIZE:
case DP_SEND_BUFFER_SIZE:
if (DpIpmGetSocketOption(statePtr, option, &value) != 0) {
return TCL_ERROR;
}
sprintf (str, "%d", value);
Tcl_DStringAppend(dsPtr, str, -1);
break;
case DP_REUSEADDR:
if (DpIpmGetSocketOption(statePtr, option, &value) != 0) {
return TCL_ERROR;
}
if (value) {
/*
* Some systems returns a non-zero value (not necessarily 1)
* to indicate "true".
*/
value = 1;
}
sprintf (str, "%d", value);
Tcl_DStringAppend(dsPtr, str, -1);
break;
case DP_GROUP:
Tcl_DStringAppend(dsPtr, Tcl_DStringValue(&statePtr->groupList),
Tcl_DStringLength(&statePtr->groupList));
break;
case DP_MYPORT:
sprintf(str, "%d", statePtr->groupPort);
Tcl_DStringAppend(dsPtr, str, -1);
break;
case DP_MULTICAST_LOOP:
#ifdef _WIN32
Tcl_DStringAppend(dsPtr, "1", -1);
#else
if (DpIpmGetSocketOption(statePtr, option, &value) != 0) {
return TCL_ERROR;
}
sprintf(str, "%d", value);
Tcl_DStringAppend(dsPtr, str, -1);
#endif
break;
default:
{
char errStr[128];
sprintf(errStr, "bad option \"%s\": must be -blocking,"
"-buffering, -buffersize, -eofchar, -translation,"
" or a channel type specific option", optionName);
Tcl_DStringAppend(dsPtr, errStr, -1);
}
Tcl_SetErrno (EINVAL);
return TCL_ERROR;
}
return TCL_OK;
}
/*
*--------------------------------------------------------------
*
* IpmWatch --
*
* Gives a short overview (a few sentences), what other
* functions are related to this one.
*
* All changes to the module made that decrease resource usage,
* but make the function harder to understand, modify, and debug.
*
* Results:
* None.
*
* Side effects:
* Global variables touched.
* I/O operations performed.
* Delayed effects.
*
*--------------------------------------------------------------
*/
static void
IpmWatch (instanceData, mask)
ClientData instanceData;
int mask;
{
IpmState *infoPtr = (IpmState *) instanceData;
Tcl_WatchFile(infoPtr->sockFile, mask);
}
/*
*--------------------------------------------------------------
*
* IpmReady --
*
* Called by the notifier to check whether events of interest are
* present on the channel.
*
* Results:
* Returns OR-ed combination of TCL_READABLE, TCL_WRITABLE and
* TCL_EXCEPTION to indicate which events of interest are present.
*
* Side effects:
* None.
*
*--------------------------------------------------------------
*/
static int
IpmReady (instanceData, mask)
ClientData instanceData;
int mask;
{
IpmState *statePtr = (IpmState *) instanceData;
return Tcl_FileReady(statePtr->sockFile, mask);
}
/*
*--------------------------------------------------------------
*
* IpmGetFile --
*
* Called from Tcl_GetChannelFile to retrieve the file handle
* from inside a IPM socket based channel.
*
* Results:
* TCL_OK always
*
* Side effects:
* None.
*
*--------------------------------------------------------------
*/
static Tcl_File
IpmGetFile(instanceData, direction)
ClientData instanceData;
int direction;
{
IpmState *statePtr = (IpmState *)instanceData;
return statePtr->sockFile;
}
/*
*----------------------------------------------------------------------
*
* CreateIPMSocket --
*
* This function opens a new socket in client mode
* and initializes the IpmState structure.
*
* Results:
* Returns a new IpmState, or NULL with an error in interp->result,
* if interp is not NULL.
*
* Side effects:
* Opens a socket.
*
*----------------------------------------------------------------------
*/
static IpmState *
CreateIPMSocket(interp, group, port, ttl)
Tcl_Interp *interp; /* For error reporting; can be NULL. */
int group; /* IP address of the multicast group. */
int port; /* Port number. */
int ttl; /* Time to live value. */
{
IpmState * statePtr = NULL;
DpSocket sock;
if (!IN_MULTICAST(group)) {
Tcl_AppendResult(interp, "No such IP multicast group", NULL);
return NULL;
}
/*
* Create the socket
*/
sock = socket(AF_INET, SOCK_DGRAM, 0);
if (sock == DP_SOCKET_ERROR) {
goto error;
}
statePtr = (IpmState *)ckalloc(sizeof(IpmState));
statePtr->interp = interp;
statePtr->groupPort = port;
statePtr->groupAddr = group;
statePtr->sock = sock;
statePtr->sockFile = Tcl_GetFile((ClientData)sock, DP_SOCKET);
Tcl_DStringInit(&statePtr->groupList);
/*
* Bind the socket
*/
memset(&statePtr->sockaddr, 0, sizeof(statePtr->sockaddr));
statePtr->sockaddr.sin_family = AF_INET;
statePtr->sockaddr.sin_port = htons((unsigned short) port);
statePtr->sockaddr.sin_addr.s_addr = htonl(INADDR_ANY);
if (DpIpmSetSocketOption(statePtr, DP_REUSEADDR, 1) != 0) {
goto error;
}
if (bind(sock, (struct sockaddr *) &statePtr->sockaddr,
sizeof(statePtr->sockaddr)) != 0) {
goto error;
}
statePtr->sockaddr.sin_addr.s_addr = htonl(group);
statePtr->groupPort = (int) ntohs(statePtr->sockaddr.sin_port);
/*
* On some older machines, we need to ask for multicast
* permission.
*/
if (DpIpmSetSocketOption(statePtr, DP_BROADCAST, 1) != 0) {
goto error;
}
/*
* Make this an IPM socket by setting the socket options. Also, set
* other default options of this socket, such as buffer size.
*/
if (DpIpmSetSocketOption(statePtr, DP_ADD_MEMBERSHIP, group) != 0) {
goto error;
}
if (DpIpmSetSocketOption(statePtr, DP_MULTICAST_TTL, ttl) != 0) {
goto error;
}
if (DpIpmSetSocketOption(statePtr, DP_MULTICAST_LOOP, 1) != 0) {
goto error;
}
if (DpIpmSetSocketOption(statePtr, DP_RECV_BUFFER_SIZE,
DP_IPM_RECVBUFSIZE) != 0) {
goto error;
}
if (DpIpmSetSocketOption(statePtr, DP_SEND_BUFFER_SIZE,
DP_IPM_SENDBUFSIZE) != 0) {
goto error;
}
return statePtr;
error:
/*
* Translate Windows Socket error to POSIX errorcode
*/
DppGetErrno();
Tcl_AppendResult(interp, "Error creating IPM socket: ",
Tcl_PosixError(interp), NULL);
if (statePtr) {
if (statePtr->sock != DP_SOCKET_ERROR) {
DppCloseSocket(statePtr->sock);
}
ckfree((char*)statePtr);
}
return NULL;
}
/*
*--------------------------------------------------------------
*
* DpIpmSetSocketOption --
*
* Sets a socket option. The allowable options for Ipm
* sockets are
* DP_SEND_BUFFER_SIZE (int)
* DP_RECV_BUFFER_SIZE (int)
* DP_BLOCK (T/F)
*
* Results:
* Zero if the operation was successful, or a nonzero POSIX
* error code if the operation failed.
*
* Side effects:
* None
*
*--------------------------------------------------------------
*/
int
DpIpmSetSocketOption(statePtr, option, value)
IpmState *statePtr; /* (in) IpmState structure */
int option; /* (in) Option to set */
int value; /* (in) new value for option */
{
int sock, result = -2;
struct ip_mreq mreq;
struct linger l;
/*
* NT 3.5 seems to have a bug when passing a size of char down.
* It comes back with an error indicating a segfault. When
* increased to the size of an int, everything seems to be OK.
* Pad on both sides of the value so NT doesn't segfault.
*/
unsigned char buf[8], *p;
p = buf+sizeof(int);
*p = (unsigned char)value;
sock = statePtr->sock;
switch (option) {
case DP_ADD_MEMBERSHIP:
if (!IN_MULTICAST(value)) {
Tcl_SetErrno(EINVAL);
return -1;
}
mreq.imr_multiaddr.s_addr = htonl(value);
mreq.imr_interface.s_addr = htonl(INADDR_ANY);
result = setsockopt(sock, IPPROTO_IP, IP_ADD_MEMBERSHIP, (char *)&mreq,
sizeof(mreq));
break;
case DP_DROP_MEMBERSHIP:
mreq.imr_multiaddr.s_addr = htonl(value);
mreq.imr_interface.s_addr = htonl(INADDR_ANY);
result = setsockopt(sock, IPPROTO_IP, IP_DROP_MEMBERSHIP, (char *)&mreq,
sizeof(mreq));
break;
case DP_BLOCK:
result = DppSetBlock (sock, value);
break;
case DP_BROADCAST:
result = setsockopt(sock, SOL_SOCKET, SO_BROADCAST, (char *)&value,
sizeof(value));
break;
case DP_MULTICAST_TTL:
#ifdef _WIN32
result = setsockopt(sock, IPPROTO_IP, IP_MULTICAST_TTL, (char *)&value,
sizeof(int));
#else
result = setsockopt(sock, IPPROTO_IP, IP_MULTICAST_TTL, (char *)p,
sizeof(unsigned char));
#endif
break;
case DP_MULTICAST_LOOP:
#ifndef _WIN32
result = setsockopt(sock, IPPROTO_IP, IP_MULTICAST_LOOP,(char*)p,
sizeof(unsigned char));
#else
result = 0;
#endif
break;
case DP_RECV_BUFFER_SIZE:
result = setsockopt(sock, SOL_SOCKET, SO_RCVBUF, (char *)&value,
sizeof(value));
break;
case DP_REUSEADDR:
result = setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, (char *)&value,
sizeof(value));
break;
case DP_SEND_BUFFER_SIZE:
result = setsockopt(sock, SOL_SOCKET, SO_SNDBUF, (char *)&value,
sizeof(value));
break;
default:
return EINVAL;
}
if (result != 0) {
return DppGetErrno();
}
return 0;
}
/*
*--------------------------------------------------------------
*
* DpIpmGetSocketOption --
*
* Sets a socket option. The allowable options for Ipm
* sockets are
* DP_SEND_BUFFER_SIZE (int)
* DP_RECV_BUFFER_SIZE (int)
* Note that we can't determine whether a socket is blocking,
* so DP_BLOCK is not allowed.
*
* Results:
* Zero if the operation was successful, or a nonzero POSIX
* error code if the operation failed.
*
* Side effects:
* None
*
*--------------------------------------------------------------
*/
int
DpIpmGetSocketOption (statePtr, option, valuePtr)
IpmState *statePtr; /* (in) IpmState structure */
int option; /* (in) Option to set */
int *valuePtr; /* (out) current value of option */
{
int sock, result, len;
struct linger l;
char p;
sock = statePtr->sock;
len = sizeof(int);
switch (option) {
case DP_RECV_BUFFER_SIZE:
result = getsockopt(sock, SOL_SOCKET, SO_RCVBUF, (char *)valuePtr,
&len);
break;
case DP_REUSEADDR:
result = getsockopt(sock, SOL_SOCKET, SO_REUSEADDR, (char *)valuePtr,
&len);
break;
case DP_SEND_BUFFER_SIZE:
result = getsockopt(sock, SOL_SOCKET, SO_SNDBUF, (char *)valuePtr,
&len);
break;
case DP_MULTICAST_LOOP:
/*
* This call should only happen in Unix since it is invalid
* under Windows. IpmGetOption should have caught it.
*/
len = sizeof(unsigned char);
result = getsockopt(sock, IPPROTO_IP, IP_MULTICAST_LOOP,(char*)&p,
&len);
*valuePtr = p;
break;
default:
return EINVAL;
}
if (result != 0) {
return DppGetErrno();
}
return 0;
}