archie/tcl7.6/unix/tclUnixNotfy.c
2024-05-27 16:40:40 +02:00

323 lines
8.4 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* tclUnixNotify.c --
*
* This file contains Unix-specific procedures for the notifier,
* which is the lowest-level part of the Tcl event loop. This file
* works together with ../generic/tclNotify.c.
*
* Copyright (c) 1995 Sun Microsystems, Inc.
*
* See the file "license.terms" for information on usage and redistribution
* of this file, and for a DISCLAIMER OF ALL WARRANTIES.
*
* SCCS: @(#) tclUnixNotfy.c 1.31 96/07/23 16:17:29
*/
#include "tclInt.h"
#include "tclPort.h"
#include <signal.h>
/*
* The information below is used to provide read, write, and
* exception masks to select during calls to Tcl_DoOneEvent.
*/
static fd_mask checkMasks[3*MASK_SIZE];
/* This array is used to build up the masks
* to be used in the next call to select.
* Bits are set in response to calls to
* Tcl_WatchFile. */
static fd_mask readyMasks[3*MASK_SIZE];
/* This array reflects the readable/writable
* conditions that were found to exist by the
* last call to select. */
static int numFdBits; /* Number of valid bits in checkMasks
* (one more than highest fd for which
* Tcl_WatchFile has been called). */
/*
* Static routines in this file:
*/
static int MaskEmpty _ANSI_ARGS_((long *maskPtr));
/*
*----------------------------------------------------------------------
*
* Tcl_WatchFile --
*
* Arrange for Tcl_DoOneEvent to include this file in the masks
* for the next call to select. This procedure is invoked by
* event sources, which are in turn invoked by Tcl_DoOneEvent
* before it invokes select.
*
* Results:
* None.
*
* Side effects:
*
* The notifier will generate a file event when the I/O channel
* given by fd next becomes ready in the way indicated by mask.
* If fd is already registered then the old mask will be replaced
* with the new one. Once the event is sent, the notifier will
* not send any more events about the fd until the next call to
* Tcl_NotifyFile.
*
*----------------------------------------------------------------------
*/
void
Tcl_WatchFile(file, mask)
Tcl_File file; /* Generic file handle for a stream. */
int mask; /* OR'ed combination of TCL_READABLE,
* TCL_WRITABLE, and TCL_EXCEPTION:
* indicates conditions to wait for
* in select. */
{
int fd, type, index;
fd_mask bit;
fd = (int) Tcl_GetFileInfo(file, &type);
if (type != TCL_UNIX_FD) {
panic("Tcl_WatchFile: unexpected file type");
}
if (fd >= FD_SETSIZE) {
panic("Tcl_WatchFile can't handle file id %d", fd);
}
index = fd/(NBBY*sizeof(fd_mask));
bit = 1 << (fd%(NBBY*sizeof(fd_mask)));
if (mask & TCL_READABLE) {
checkMasks[index] |= bit;
}
if (mask & TCL_WRITABLE) {
(checkMasks+MASK_SIZE)[index] |= bit;
}
if (mask & TCL_EXCEPTION) {
(checkMasks+2*(MASK_SIZE))[index] |= bit;
}
if (numFdBits <= fd) {
numFdBits = fd+1;
}
}
/*
*----------------------------------------------------------------------
*
* Tcl_FileReady --
*
* Indicates what conditions (readable, writable, etc.) were
* present on a file the last time the notifier invoked select.
* This procedure is typically invoked by event sources to see
* if they should queue events.
*
* Results:
* The return value is 0 if none of the conditions specified by mask
* was true for fd the last time the system checked. If any of the
* conditions were true, then the return value is a mask of those
* that were true.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
int
Tcl_FileReady(file, mask)
Tcl_File file; /* Generic file handle for a stream. */
int mask; /* OR'ed combination of TCL_READABLE,
* TCL_WRITABLE, and TCL_EXCEPTION:
* indicates conditions caller cares about. */
{
int index, result, type, fd;
fd_mask bit;
fd = (int) Tcl_GetFileInfo(file, &type);
if (type != TCL_UNIX_FD) {
panic("Tcl_FileReady: unexpected file type");
}
index = fd/(NBBY*sizeof(fd_mask));
bit = 1 << (fd%(NBBY*sizeof(fd_mask)));
result = 0;
if ((mask & TCL_READABLE) && (readyMasks[index] & bit)) {
result |= TCL_READABLE;
}
if ((mask & TCL_WRITABLE) && ((readyMasks+MASK_SIZE)[index] & bit)) {
result |= TCL_WRITABLE;
}
if ((mask & TCL_EXCEPTION) && ((readyMasks+(2*MASK_SIZE))[index] & bit)) {
result |= TCL_EXCEPTION;
}
return result;
}
/*
*----------------------------------------------------------------------
*
* MaskEmpty --
*
* Returns nonzero if mask is empty (has no bits set).
*
* Results:
* Nonzero if the mask is empty, zero otherwise.
*
* Side effects:
* None
*
*----------------------------------------------------------------------
*/
static int
MaskEmpty(maskPtr)
long *maskPtr;
{
long *runPtr, *tailPtr;
int found, sz;
sz = 3 * ((MASK_SIZE) / sizeof(long)) * sizeof(fd_mask);
for (runPtr = maskPtr, tailPtr = maskPtr + sz, found = 0;
runPtr < tailPtr;
runPtr++) {
if (*runPtr != 0) {
found = 1;
break;
}
}
return !found;
}
/*
*----------------------------------------------------------------------
*
* Tcl_WaitForEvent --
*
* This procedure does the lowest level wait for events in a
* platform-specific manner. It uses information provided by
* previous calls to Tcl_WatchFile, plus the timePtr argument,
* to determine what to wait for and how long to wait.
*
* Results:
* The return value is normally TCL_OK. However, if there are
* no events to wait for (e.g. no files and no timers) so that
* the procedure would block forever, then it returns TCL_ERROR.
*
* Side effects:
* May put the process to sleep for a while, depending on timePtr.
* When this procedure returns, an event of interest to the application
* has probably, but not necessarily, occurred.
*
*----------------------------------------------------------------------
*/
int
Tcl_WaitForEvent(timePtr)
Tcl_Time *timePtr; /* Specifies the maximum amount of time
* that this procedure should block before
* returning. The time is given as an
* interval, not an absolute wakeup time.
* NULL means block forever. */
{
struct timeval timeout, *timeoutPtr;
int numFound;
memcpy((VOID *) readyMasks, (VOID *) checkMasks,
3*MASK_SIZE*sizeof(fd_mask));
if (timePtr == NULL) {
if ((numFdBits == 0) || (MaskEmpty((long *) readyMasks))) {
return TCL_ERROR;
}
timeoutPtr = NULL;
} else {
timeoutPtr = &timeout;
timeout.tv_sec = timePtr->sec;
timeout.tv_usec = timePtr->usec;
}
numFound = select(numFdBits, (SELECT_MASK *) &readyMasks[0],
(SELECT_MASK *) &readyMasks[MASK_SIZE],
(SELECT_MASK *) &readyMasks[2*MASK_SIZE], timeoutPtr);
/*
* Some systems don't clear the masks after an error, so
* we have to do it here.
*/
if (numFound == -1) {
memset((VOID *) readyMasks, 0, 3*MASK_SIZE*sizeof(fd_mask));
}
/*
* Reset the check masks in preparation for the next call to
* select.
*/
numFdBits = 0;
memset((VOID *) checkMasks, 0, 3*MASK_SIZE*sizeof(fd_mask));
return TCL_OK;
}
/*
*----------------------------------------------------------------------
*
* Tcl_Sleep --
*
* Delay execution for the specified number of milliseconds.
*
* Results:
* None.
*
* Side effects:
* Time passes.
*
*----------------------------------------------------------------------
*/
void
Tcl_Sleep(ms)
int ms; /* Number of milliseconds to sleep. */
{
static struct timeval delay;
Tcl_Time before, after;
/*
* The only trick here is that select appears to return early
* under some conditions, so we have to check to make sure that
* the right amount of time really has elapsed. If it's too
* early, go back to sleep again.
*/
TclpGetTime(&before);
after = before;
after.sec += ms/1000;
after.usec += (ms%1000)*1000;
if (after.usec > 1000000) {
after.usec -= 1000000;
after.sec += 1;
}
while (1) {
delay.tv_sec = after.sec - before.sec;
delay.tv_usec = after.usec - before.usec;
if (delay.tv_usec < 0) {
delay.tv_usec += 1000000;
delay.tv_sec -= 1;
}
/*
* Special note: must convert delay.tv_sec to int before comparing
* to zero, since delay.tv_usec is unsigned on some platforms.
*/
if ((((int) delay.tv_sec) < 0)
|| ((delay.tv_usec == 0) && (delay.tv_sec == 0))) {
break;
}
(void) select(0, (SELECT_MASK *) 0, (SELECT_MASK *) 0,
(SELECT_MASK *) 0, &delay);
TclpGetTime(&before);
}
}