archie/tcl7.6/unix/tclUnixTest.c
2024-05-27 16:40:40 +02:00

379 lines
11 KiB
C
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* tclUnixTest.c --
*
* Contains platform specific test commands for the Unix platform.
*
* Copyright (c) 1996 Sun Microsystems, Inc.
*
* See the file "license.terms" for information on usage and redistribution
* of this file, and for a DISCLAIMER OF ALL WARRANTIES.
*
* SCCS: @(#) tclUnixTest.c 1.1 96/03/26 12:44:30
*/
#include "tclInt.h"
#include "tclPort.h"
/*
* The stuff below is used to keep track of file handlers created and
* exercised by the "testfilehandler" command.
*/
typedef struct Pipe {
Tcl_File readFile; /* File handle for reading from the
* pipe. NULL means pipe doesn't exist yet. */
Tcl_File writeFile; /* File handle for writing from the
* pipe. */
int readCount; /* Number of times the file handler for
* this file has triggered and the file
* was readable. */
int writeCount; /* Number of times the file handler for
* this file has triggered and the file
* was writable. */
} Pipe;
#define MAX_PIPES 10
static Pipe testPipes[MAX_PIPES];
/*
* Forward declarations of procedures defined later in this file:
*/
static void TestFileHandlerProc _ANSI_ARGS_((ClientData clientData,
int mask));
static int TestfilehandlerCmd _ANSI_ARGS_((ClientData dummy,
Tcl_Interp *interp, int argc, char **argv));
static int TestgetopenfileCmd _ANSI_ARGS_((ClientData dummy,
Tcl_Interp *interp, int argc, char **argv));
int TclplatformtestInit _ANSI_ARGS_((Tcl_Interp *interp));
/*
*----------------------------------------------------------------------
*
* TclplatformtestInit --
*
* Defines commands that test platform specific functionality for
* Unix platforms.
*
* Results:
* A standard Tcl result.
*
* Side effects:
* Defines new commands.
*
*----------------------------------------------------------------------
*/
int
TclplatformtestInit(interp)
Tcl_Interp *interp; /* Interpreter to add commands to. */
{
Tcl_CreateCommand(interp, "testfilehandler", TestfilehandlerCmd,
(ClientData) 0, (Tcl_CmdDeleteProc *) NULL);
Tcl_CreateCommand(interp, "testgetopenfile", TestgetopenfileCmd,
(ClientData) 0, (Tcl_CmdDeleteProc *) NULL);
return TCL_OK;
}
/*
*----------------------------------------------------------------------
*
* TestfilehandlerCmd --
*
* This procedure implements the "testfilehandler" command. It is
* used to test Tcl_CreateFileHandler, Tcl_DeleteFileHandler, and
* TclWaitForFile.
*
* Results:
* A standard Tcl result.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
static int
TestfilehandlerCmd(clientData, interp, argc, argv)
ClientData clientData; /* Not used. */
Tcl_Interp *interp; /* Current interpreter. */
int argc; /* Number of arguments. */
char **argv; /* Argument strings. */
{
Pipe *pipePtr;
int i, mask, timeout;
static int initialized = 0;
char buffer[4000];
Tcl_File file;
/*
* NOTE: When we make this code work on Windows also, the following
* variable needs to be made Unix-only.
*/
int fd;
if (!initialized) {
for (i = 0; i < MAX_PIPES; i++) {
testPipes[i].readFile = NULL;
}
initialized = 1;
}
if (argc < 2) {
Tcl_AppendResult(interp, "wrong # arguments: should be \"", argv[0],
" option ... \"", (char *) NULL);
return TCL_ERROR;
}
pipePtr = NULL;
if (argc >= 3) {
if (Tcl_GetInt(interp, argv[2], &i) != TCL_OK) {
return TCL_ERROR;
}
if (i >= MAX_PIPES) {
Tcl_AppendResult(interp, "bad index ", argv[2], (char *) NULL);
return TCL_ERROR;
}
pipePtr = &testPipes[i];
}
if (strcmp(argv[1], "close") == 0) {
for (i = 0; i < MAX_PIPES; i++) {
if (testPipes[i].readFile != NULL) {
Tcl_DeleteFileHandler(testPipes[i].readFile);
/*
* NOTE: Unix specific code below.
*/
fd = (int) Tcl_GetFileInfo(testPipes[i].readFile, NULL);
close(fd);
Tcl_FreeFile(testPipes[i].readFile);
testPipes[i].readFile = NULL;
Tcl_DeleteFileHandler(testPipes[i].writeFile);
/*
* NOTE: Unix specific code below.
*/
fd = (int) Tcl_GetFileInfo(testPipes[i].writeFile, NULL);
Tcl_FreeFile(testPipes[i].writeFile);
close(fd);
}
}
} else if (strcmp(argv[1], "clear") == 0) {
if (argc != 3) {
Tcl_AppendResult(interp, "wrong # arguments: should be \"",
argv[0], " clear index\"", (char *) NULL);
return TCL_ERROR;
}
pipePtr->readCount = pipePtr->writeCount = 0;
} else if (strcmp(argv[1], "counts") == 0) {
if (argc != 3) {
Tcl_AppendResult(interp, "wrong # arguments: should be \"",
argv[0], " counts index\"", (char *) NULL);
return TCL_ERROR;
}
sprintf(interp->result, "%d %d", pipePtr->readCount,
pipePtr->writeCount);
} else if (strcmp(argv[1], "create") == 0) {
if (argc != 5) {
Tcl_AppendResult(interp, "wrong # arguments: should be \"",
argv[0], " create index readMode writeMode\"",
(char *) NULL);
return TCL_ERROR;
}
if (pipePtr->readFile == NULL) {
if (!TclCreatePipe(&pipePtr->readFile, &pipePtr->writeFile)) {
Tcl_AppendResult(interp, "couldn't open pipe: ",
Tcl_PosixError(interp), (char *) NULL);
return TCL_ERROR;
}
#ifdef O_NONBLOCK
fcntl((int)Tcl_GetFileInfo(pipePtr->readFile, NULL),
F_SETFL, O_NONBLOCK);
fcntl((int)Tcl_GetFileInfo(pipePtr->writeFile, NULL),
F_SETFL, O_NONBLOCK);
#else
interp->result = "can't make pipes non-blocking";
return TCL_ERROR;
#endif
}
pipePtr->readCount = 0;
pipePtr->writeCount = 0;
if (strcmp(argv[3], "readable") == 0) {
Tcl_CreateFileHandler(pipePtr->readFile, TCL_READABLE,
TestFileHandlerProc, (ClientData) pipePtr);
} else if (strcmp(argv[3], "off") == 0) {
Tcl_DeleteFileHandler(pipePtr->readFile);
} else if (strcmp(argv[3], "disabled") == 0) {
Tcl_CreateFileHandler(pipePtr->readFile, 0,
TestFileHandlerProc, (ClientData) pipePtr);
} else {
Tcl_AppendResult(interp, "bad read mode \"", argv[3], "\"",
(char *) NULL);
return TCL_ERROR;
}
if (strcmp(argv[4], "writable") == 0) {
Tcl_CreateFileHandler(pipePtr->writeFile, TCL_WRITABLE,
TestFileHandlerProc, (ClientData) pipePtr);
} else if (strcmp(argv[4], "off") == 0) {
Tcl_DeleteFileHandler(pipePtr->writeFile);
} else if (strcmp(argv[4], "disabled") == 0) {
Tcl_CreateFileHandler(pipePtr->writeFile, 0,
TestFileHandlerProc, (ClientData) pipePtr);
} else {
Tcl_AppendResult(interp, "bad read mode \"", argv[4], "\"",
(char *) NULL);
return TCL_ERROR;
}
} else if (strcmp(argv[1], "empty") == 0) {
if (argc != 3) {
Tcl_AppendResult(interp, "wrong # arguments: should be \"",
argv[0], " empty index\"", (char *) NULL);
return TCL_ERROR;
}
/*
* NOTE: Unix specific code below.
*/
fd = (int) Tcl_GetFileInfo(pipePtr->readFile, NULL);
while (read(fd, buffer, 4000) > 0) {
/* Empty loop body. */
}
} else if (strcmp(argv[1], "fill") == 0) {
if (argc != 3) {
Tcl_AppendResult(interp, "wrong # arguments: should be \"",
argv[0], " empty index\"", (char *) NULL);
return TCL_ERROR;
}
/*
* NOTE: Unix specific code below.
*/
fd = (int) Tcl_GetFileInfo(pipePtr->writeFile, NULL);
memset((VOID *) buffer, 'a', 4000);
while (write(fd, buffer, 4000) > 0) {
/* Empty loop body. */
}
} else if (strcmp(argv[1], "fillpartial") == 0) {
if (argc != 3) {
Tcl_AppendResult(interp, "wrong # arguments: should be \"",
argv[0], " empty index\"", (char *) NULL);
return TCL_ERROR;
}
/*
* NOTE: Unix specific code below.
*/
fd = (int) Tcl_GetFileInfo(pipePtr->writeFile, NULL);
memset((VOID *) buffer, 'b', 10);
sprintf(interp->result, "%d", write(fd, buffer, 10));
} else if (strcmp(argv[1], "oneevent") == 0) {
Tcl_DoOneEvent(TCL_FILE_EVENTS|TCL_DONT_WAIT);
} else if (strcmp(argv[1], "wait") == 0) {
if (argc != 5) {
Tcl_AppendResult(interp, "wrong # arguments: should be \"",
argv[0], " wait index readable/writable timeout\"",
(char *) NULL);
return TCL_ERROR;
}
if (pipePtr->readFile == NULL) {
Tcl_AppendResult(interp, "pipe ", argv[2], " doesn't exist",
(char *) NULL);
return TCL_ERROR;
}
if (strcmp(argv[3], "readable") == 0) {
mask = TCL_READABLE;
file = pipePtr->readFile;
} else {
mask = TCL_WRITABLE;
file = pipePtr->writeFile;
}
if (Tcl_GetInt(interp, argv[4], &timeout) != TCL_OK) {
return TCL_ERROR;
}
i = TclWaitForFile(file, mask, timeout);
if (i & TCL_READABLE) {
Tcl_AppendElement(interp, "readable");
}
if (i & TCL_WRITABLE) {
Tcl_AppendElement(interp, "writable");
}
} else if (strcmp(argv[1], "windowevent") == 0) {
Tcl_DoOneEvent(TCL_WINDOW_EVENTS|TCL_DONT_WAIT);
} else {
Tcl_AppendResult(interp, "bad option \"", argv[1],
"\": must be close, clear, counts, create, empty, fill, ",
"fillpartial, oneevent, wait, or windowevent",
(char *) NULL);
return TCL_ERROR;
}
return TCL_OK;
}
static void TestFileHandlerProc(clientData, mask)
ClientData clientData; /* Points to a Pipe structure. */
int mask; /* Indicates which events happened:
* TCL_READABLE or TCL_WRITABLE. */
{
Pipe *pipePtr = (Pipe *) clientData;
if (mask & TCL_READABLE) {
pipePtr->readCount++;
}
if (mask & TCL_WRITABLE) {
pipePtr->writeCount++;
}
}
/*
*----------------------------------------------------------------------
*
* TestgetopenfileCmd --
*
* This procedure implements the "testgetopenfile" command. It is
* used to get a FILE * value from a registered channel.
*
* Results:
* A standard Tcl result.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
static int
TestgetopenfileCmd(clientData, interp, argc, argv)
ClientData clientData; /* Not used. */
Tcl_Interp *interp; /* Current interpreter. */
int argc; /* Number of arguments. */
char **argv; /* Argument strings. */
{
ClientData filePtr;
if (argc != 3) {
Tcl_AppendResult(interp,
"wrong # args: should be \"", argv[0],
" channelName forWriting\"",
(char *) NULL);
return TCL_ERROR;
}
if (Tcl_GetOpenFile(interp, argv[1], atoi(argv[2]), 1, &filePtr)
== TCL_ERROR) {
return TCL_ERROR;
}
if (filePtr == (ClientData) NULL) {
Tcl_AppendResult(interp,
"Tcl_GetOpenFile succeeded but FILE * NULL!", (char *) NULL);
return TCL_ERROR;
}
return TCL_OK;
}