archie/tcl7.6/generic/tclIO.c

5513 lines
176 KiB
C
Raw Normal View History

2024-05-27 16:40:40 +02:00
/*
* tclIO.c --
*
* This file provides the generic portions (those that are the same on
* all platforms and for all channel types) of Tcl's IO facilities.
*
* Copyright (c) 1995-1996 Sun Microsystems, Inc.
*
* See the file "license.terms" for information on usage and redistribution
* of this file, and for a DISCLAIMER OF ALL WARRANTIES.
*
* SCCS: @(#) tclIO.c 1.240 96/09/27 10:00:58
*/
#include "tclInt.h"
#include "tclPort.h"
/*
* Make sure that both EAGAIN and EWOULDBLOCK are defined. This does not
* compile on systems where neither is defined. We want both defined so
* that we can test safely for both. In the code we still have to test for
* both because there may be systems on which both are defined and have
* different values.
*/
#if ((!defined(EWOULDBLOCK)) && (defined(EAGAIN)))
# define EWOULDBLOCK EAGAIN
#endif
#if ((!defined(EAGAIN)) && (defined(EWOULDBLOCK)))
# define EAGAIN EWOULDBLOCK
#endif
#if ((!defined(EAGAIN)) && (!defined(EWOULDBLOCK)))
error one of EWOULDBLOCK or EAGAIN must be defined
#endif
/*
* struct ChannelBuffer:
*
* Buffers data being sent to or from a channel.
*/
typedef struct ChannelBuffer {
int nextAdded; /* The next position into which a character
* will be put in the buffer. */
int nextRemoved; /* Position of next byte to be removed
* from the buffer. */
int bufSize; /* How big is the buffer? */
struct ChannelBuffer *nextPtr;
/* Next buffer in chain. */
char buf[4]; /* Placeholder for real buffer. The real
* buffer occuppies this space + bufSize-4
* bytes. This must be the last field in
* the structure. */
} ChannelBuffer;
#define CHANNELBUFFER_HEADER_SIZE (sizeof(ChannelBuffer) - 4)
/*
* The following defines the *default* buffer size for channels.
*/
#define CHANNELBUFFER_DEFAULT_SIZE (1024 * 4)
/*
* Structure to record a close callback. One such record exists for
* each close callback registered for a channel.
*/
typedef struct CloseCallback {
Tcl_CloseProc *proc; /* The procedure to call. */
ClientData clientData; /* Arbitrary one-word data to pass
* to the callback. */
struct CloseCallback *nextPtr; /* For chaining close callbacks. */
} CloseCallback;
/*
* Forward declaration of Channel; being used in struct EventScriptRecord,
* below.
*/
typedef struct Channel *ChanPtr;
/*
* The following structure describes the information saved from a call to
* "fileevent". This is used later when the event being waited for to
* invoke the saved script in the interpreter designed in this record.
*/
typedef struct EventScriptRecord {
struct Channel *chanPtr; /* The channel for which this script is
* registered. This is used only when an
* error occurs during evaluation of the
* script, to delete the handler. */
char *script; /* Script to invoke. */
Tcl_Interp *interp; /* In what interpreter to invoke script? */
int mask; /* Events must overlap current mask for the
* stored script to be invoked. */
struct EventScriptRecord *nextPtr;
/* Next in chain of records. */
} EventScriptRecord;
/*
* Forward declaration of ChannelHandler; being used in struct Channel,
* below.
*/
typedef struct ChannelHandler *ChannelHandlerPtr;
/*
* struct Channel:
*
* One of these structures is allocated for each open channel. It contains data
* specific to the channel but which belongs to the generic part of the Tcl
* channel mechanism, and it points at an instance specific (and type
* specific) * instance data, and at a channel type structure.
*/
typedef struct Channel {
char *channelName; /* The name of the channel instance in Tcl
* commands. Storage is owned by the generic IO
* code, is dynamically allocated. */
int flags; /* ORed combination of the flags defined
* below. */
Tcl_EolTranslation inputTranslation;
/* What translation to apply for end of line
* sequences on input? */
Tcl_EolTranslation outputTranslation;
/* What translation to use for generating
* end of line sequences in output? */
int inEofChar; /* If nonzero, use this as a signal of EOF
* on input. */
int outEofChar; /* If nonzero, append this to the channel
* when it is closed if it is open for
* writing. */
int unreportedError; /* Non-zero if an error report was deferred
* because it happened in the background. The
* value is the POSIX error code. */
ClientData instanceData; /* Instance specific data. */
Tcl_ChannelType *typePtr; /* Pointer to channel type structure. */
int refCount; /* How many interpreters hold references to
* this IO channel? */
CloseCallback *closeCbPtr; /* Callbacks registered to be called when the
* channel is closed. */
ChannelBuffer *curOutPtr; /* Current output buffer being filled. */
ChannelBuffer *outQueueHead;/* Points at first buffer in output queue. */
ChannelBuffer *outQueueTail;/* Points at last buffer in output queue. */
ChannelBuffer *saveInBufPtr;/* Buffer saved for input queue - eliminates
* need to allocate a new buffer for "gets"
* that crosses buffer boundaries. */
ChannelBuffer *inQueueHead; /* Points at first buffer in input queue. */
ChannelBuffer *inQueueTail; /* Points at last buffer in input queue. */
struct ChannelHandler *chPtr;/* List of channel handlers registered
* for this channel. */
int interestMask; /* Mask of all events this channel has
* handlers for. */
struct Channel *nextChanPtr;/* Next in list of channels currently open. */
EventScriptRecord *scriptRecordPtr;
/* Chain of all scripts registered for
* event handlers ("fileevent") on this
* channel. */
int bufSize; /* What size buffers to allocate? */
} Channel;
/*
* Values for the flags field in Channel. Any ORed combination of the
* following flags can be stored in the field. These flags record various
* options and state bits about the channel. In addition to the flags below,
* the channel can also have TCL_READABLE (1<<1) and TCL_WRITABLE (1<<2) set.
*/
#define CHANNEL_NONBLOCKING (1<<3) /* Channel is currently in
* nonblocking mode. */
#define CHANNEL_LINEBUFFERED (1<<4) /* Output to the channel must be
* flushed after every newline. */
#define CHANNEL_UNBUFFERED (1<<5) /* Output to the channel must always
* be flushed immediately. */
#define BUFFER_READY (1<<6) /* Current output buffer (the
* curOutPtr field in the
* channel structure) should be
* output as soon as possible event
* though it may not be full. */
#define BG_FLUSH_SCHEDULED (1<<7) /* A background flush of the
* queued output buffers has been
* scheduled. */
#define CHANNEL_CLOSED (1<<8) /* Channel has been closed. No
* further Tcl-level IO on the
* channel is allowed. */
#define CHANNEL_EOF (1<<9) /* EOF occurred on this channel.
* This bit is cleared before every
* input operation. */
#define CHANNEL_STICKY_EOF (1<<10) /* EOF occurred on this channel because
* we saw the input eofChar. This bit
* prevents clearing of the EOF bit
* before every input operation. */
#define CHANNEL_BLOCKED (1<<11) /* EWOULDBLOCK or EAGAIN occurred
* on this channel. This bit is
* cleared before every input or
* output operation. */
#define INPUT_SAW_CR (1<<12) /* Channel is in CRLF eol input
* translation mode and the last
* byte seen was a "\r". */
#define CHANNEL_DEAD (1<<13) /* The channel has been closed by
* the exit handler (on exit) but
* not deallocated. When any IO
* operation sees this flag on a
* channel, it does not call driver
* level functions to avoid referring
* to deallocated data. */
/*
* For each channel handler registered in a call to Tcl_CreateChannelHandler,
* there is one record of the following type. All of records for a specific
* channel are chained together in a singly linked list which is stored in
* the channel structure.
*/
typedef struct ChannelHandler {
Channel *chanPtr; /* The channel structure for this channel. */
int mask; /* Mask of desired events. */
Tcl_ChannelProc *proc; /* Procedure to call in the type of
* Tcl_CreateChannelHandler. */
ClientData clientData; /* Argument to pass to procedure. */
struct ChannelHandler *nextPtr;
/* Next one in list of registered handlers. */
} ChannelHandler;
/*
* This structure keeps track of the current ChannelHandler being invoked in
* the current invocation of ChannelHandlerEventProc. There is a potential
* problem if a ChannelHandler is deleted while it is the current one, since
* ChannelHandlerEventProc needs to look at the nextPtr field. To handle this
* problem, structures of the type below indicate the next handler to be
* processed for any (recursively nested) dispatches in progress. The
* nextHandlerPtr field is updated if the handler being pointed to is deleted.
* The nextPtr field is used to chain together all recursive invocations, so
* that Tcl_DeleteChannelHandler can find all the recursively nested
* invocations of ChannelHandlerEventProc and compare the handler being
* deleted against the NEXT handler to be invoked in that invocation; when it
* finds such a situation, Tcl_DeleteChannelHandler updates the nextHandlerPtr
* field of the structure to the next handler.
*/
typedef struct NextChannelHandler {
ChannelHandler *nextHandlerPtr; /* The next handler to be invoked in
* this invocation. */
struct NextChannelHandler *nestedHandlerPtr;
/* Next nested invocation of
* ChannelHandlerEventProc. */
} NextChannelHandler;
/*
* This variable holds the list of nested ChannelHandlerEventProc invocations.
*/
static NextChannelHandler *nestedHandlerPtr = (NextChannelHandler *) NULL;
/*
* List of all channels currently open.
*/
static Channel *firstChanPtr = (Channel *) NULL;
/*
* Has a channel exit handler been created yet?
*/
static int channelExitHandlerCreated = 0;
/*
* Has the channel event source been created and registered with the
* notifier?
*/
static int channelEventSourceCreated = 0;
/*
* The following structure describes the event that is added to the Tcl
* event queue by the channel handler check procedure.
*/
typedef struct ChannelHandlerEvent {
Tcl_Event header; /* Standard header for all events. */
Channel *chanPtr; /* The channel that is ready. */
int readyMask; /* Events that have occurred. */
} ChannelHandlerEvent;
/*
* Static variables to hold channels for stdin, stdout and stderr.
*/
static Tcl_Channel stdinChannel = NULL;
static int stdinInitialized = 0;
static Tcl_Channel stdoutChannel = NULL;
static int stdoutInitialized = 0;
static Tcl_Channel stderrChannel = NULL;
static int stderrInitialized = 0;
/*
* Static functions in this file:
*/
static int ChannelEventDeleteProc _ANSI_ARGS_((
Tcl_Event *evPtr, ClientData clientData));
static void ChannelEventSourceExitProc _ANSI_ARGS_((
ClientData data));
static int ChannelHandlerEventProc _ANSI_ARGS_((
Tcl_Event *evPtr, int flags));
static void ChannelHandlerCheckProc _ANSI_ARGS_((
ClientData clientData, int flags));
static void ChannelHandlerSetupProc _ANSI_ARGS_((
ClientData clientData, int flags));
static void ChannelEventScriptInvoker _ANSI_ARGS_((
ClientData clientData, int flags));
static void CheckForStdChannelsBeingClosed _ANSI_ARGS_((
Tcl_Channel chan));
static void CleanupChannelHandlers _ANSI_ARGS_((
Tcl_Interp *interp, Channel *chanPtr));
static int CloseChannel _ANSI_ARGS_((Tcl_Interp *interp,
Channel *chanPtr, int errorCode));
static void CloseChannelsOnExit _ANSI_ARGS_((ClientData data));
static int CopyAndTranslateBuffer _ANSI_ARGS_((
Channel *chanPtr, char *result, int space));
static void CreateScriptRecord _ANSI_ARGS_((
Tcl_Interp *interp, Channel *chanPtr,
int mask, char *script));
static void DeleteChannelTable _ANSI_ARGS_((
ClientData clientData, Tcl_Interp *interp));
static void DeleteScriptRecord _ANSI_ARGS_((Tcl_Interp *interp,
Channel *chanPtr, int mask));
static void DiscardInputQueued _ANSI_ARGS_((
Channel *chanPtr, int discardSavedBuffers));
static void DiscardOutputQueued _ANSI_ARGS_((
Channel *chanPtr));
static int FlushChannel _ANSI_ARGS_((Tcl_Interp *interp,
Channel *chanPtr, int calledFromAsyncFlush));
static void FlushEventProc _ANSI_ARGS_((ClientData clientData,
int mask));
static Tcl_HashTable *GetChannelTable _ANSI_ARGS_((Tcl_Interp *interp));
static int GetEOL _ANSI_ARGS_((Channel *chanPtr));
static int GetInput _ANSI_ARGS_((Channel *chanPtr));
static void RecycleBuffer _ANSI_ARGS_((Channel *chanPtr,
ChannelBuffer *bufPtr, int mustDiscard));
static void ReturnScriptRecord _ANSI_ARGS_((Tcl_Interp *interp,
Channel *chanPtr, int mask));
static int ScanBufferForEOL _ANSI_ARGS_((Channel *chanPtr,
ChannelBuffer *bufPtr,
Tcl_EolTranslation translation, int eofChar,
int *bytesToEOLPtr, int *crSeenPtr));
static int ScanInputForEOL _ANSI_ARGS_((Channel *chanPtr,
int *bytesQueuedPtr));
static void WaitForChannel _ANSI_ARGS_((Channel *chanPtr,
int mask, int timeOut));
/*
*----------------------------------------------------------------------
*
* TclFindFileChannel --
*
* Finds a channel given two Tcl_Files.
*
* Results:
* The Tcl_Channel found. Also returns nonzero in fileUsedPtr output
* parameter if it finds that the Tcl_File is already used in another
* channel.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
Tcl_Channel
TclFindFileChannel(inFile, outFile, fileUsedPtr)
Tcl_File inFile, outFile; /* Channel has these Tcl_Files. */
int *fileUsedPtr;
{
Channel *chanPtr;
Tcl_File chanIn, chanOut;
*fileUsedPtr = 0;
for (chanPtr = firstChanPtr;
chanPtr != (Channel *) NULL;
chanPtr = chanPtr->nextChanPtr) {
chanIn = Tcl_GetChannelFile((Tcl_Channel) chanPtr, TCL_READABLE);
chanOut = Tcl_GetChannelFile((Tcl_Channel) chanPtr, TCL_WRITABLE);
if ((chanIn == (Tcl_File) NULL) && (chanOut == (Tcl_File) NULL)) {
continue;
}
if ((chanIn == inFile) && (chanOut == outFile)) {
return (Tcl_Channel) chanPtr;
}
if ((inFile != (Tcl_File) NULL) && (chanIn == inFile)) {
*fileUsedPtr = 1;
return (Tcl_Channel) NULL;
}
if ((outFile != (Tcl_File) NULL) && (chanOut == outFile)) {
*fileUsedPtr = 1;
return (Tcl_Channel) NULL;
}
}
return (Tcl_Channel) NULL;
}
/*
*----------------------------------------------------------------------
*
* Tcl_SetStdChannel --
*
* This function is used to change the channels that are used
* for stdin/stdout/stderr in new interpreters.
*
* Results:
* None
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
void
Tcl_SetStdChannel(channel, type)
Tcl_Channel channel;
int type; /* One of TCL_STDIN, TCL_STDOUT, TCL_STDERR. */
{
switch (type) {
case TCL_STDIN:
stdinInitialized = 1;
stdinChannel = channel;
break;
case TCL_STDOUT:
stdoutInitialized = 1;
stdoutChannel = channel;
break;
case TCL_STDERR:
stderrInitialized = 1;
stderrChannel = channel;
break;
}
}
/*
*----------------------------------------------------------------------
*
* Tcl_GetStdChannel --
*
* Returns the specified standard channel.
*
* Results:
* Returns the specified standard channel, or NULL.
*
* Side effects:
* May cause the creation of a standard channel and the underlying
* file.
*
*----------------------------------------------------------------------
*/
Tcl_Channel
Tcl_GetStdChannel(type)
int type; /* One of TCL_STDIN, TCL_STDOUT, TCL_STDERR. */
{
Tcl_Channel channel = NULL;
/*
* If the channels were not created yet, create them now and
* store them in the static variables. Note that we need to set
* stdinInitialized before calling TclGetDefaultStdChannel in order
* to avoid recursive loops when TclGetDefaultStdChannel calls
* Tcl_CreateChannel.
*/
switch (type) {
case TCL_STDIN:
if (!stdinInitialized) {
stdinChannel = TclGetDefaultStdChannel(TCL_STDIN);
stdinInitialized = 1;
/*
* Artificially bump the refcount to ensure that the channel
* is only closed on exit.
*
* NOTE: Must only do this if stdinChannel is not NULL. It
* can be NULL in situations where Tcl is unable to connect
* to the standard input.
*/
if (stdinChannel != (Tcl_Channel) NULL) {
(void) Tcl_RegisterChannel((Tcl_Interp *) NULL,
stdinChannel);
}
}
channel = stdinChannel;
break;
case TCL_STDOUT:
if (!stdoutInitialized) {
stdoutChannel = TclGetDefaultStdChannel(TCL_STDOUT);
stdoutInitialized = 1;
/*
* Artificially bump the refcount to ensure that the channel
* is only closed on exit.
*
* NOTE: Must only do this if stdoutChannel is not NULL. It
* can be NULL in situations where Tcl is unable to connect
* to the standard output.
*/
if (stdoutChannel != (Tcl_Channel) NULL) {
(void) Tcl_RegisterChannel((Tcl_Interp *) NULL,
stdoutChannel);
}
}
channel = stdoutChannel;
break;
case TCL_STDERR:
if (!stderrInitialized) {
stderrChannel = TclGetDefaultStdChannel(TCL_STDERR);
stderrInitialized = 1;
/*
* Artificially bump the refcount to ensure that the channel
* is only closed on exit.
*
* NOTE: Must only do this if stderrChannel is not NULL. It
* can be NULL in situations where Tcl is unable to connect
* to the standard error.
*/
if (stderrChannel != (Tcl_Channel) NULL) {
(void) Tcl_RegisterChannel((Tcl_Interp *) NULL,
stderrChannel);
}
}
channel = stderrChannel;
break;
}
return channel;
}
/*
*----------------------------------------------------------------------
*
* Tcl_CreateCloseHandler
*
* Creates a close callback which will be called when the channel is
* closed.
*
* Results:
* None.
*
* Side effects:
* Causes the callback to be called in the future when the channel
* will be closed.
*
*----------------------------------------------------------------------
*/
void
Tcl_CreateCloseHandler(chan, proc, clientData)
Tcl_Channel chan; /* The channel for which to create the
* close callback. */
Tcl_CloseProc *proc; /* The callback routine to call when the
* channel will be closed. */
ClientData clientData; /* Arbitrary data to pass to the
* close callback. */
{
Channel *chanPtr;
CloseCallback *cbPtr;
chanPtr = (Channel *) chan;
cbPtr = (CloseCallback *) ckalloc((unsigned) sizeof(CloseCallback));
cbPtr->proc = proc;
cbPtr->clientData = clientData;
cbPtr->nextPtr = chanPtr->closeCbPtr;
chanPtr->closeCbPtr = cbPtr;
}
/*
*----------------------------------------------------------------------
*
* Tcl_DeleteCloseHandler --
*
* Removes a callback that would have been called on closing
* the channel. If there is no matching callback then this
* function has no effect.
*
* Results:
* None.
*
* Side effects:
* The callback will not be called in the future when the channel
* is eventually closed.
*
*----------------------------------------------------------------------
*/
void
Tcl_DeleteCloseHandler(chan, proc, clientData)
Tcl_Channel chan; /* The channel for which to cancel the
* close callback. */
Tcl_CloseProc *proc; /* The procedure for the callback to
* remove. */
ClientData clientData; /* The callback data for the callback
* to remove. */
{
Channel *chanPtr;
CloseCallback *cbPtr, *cbPrevPtr;
chanPtr = (Channel *) chan;
for (cbPtr = chanPtr->closeCbPtr, cbPrevPtr = (CloseCallback *) NULL;
cbPtr != (CloseCallback *) NULL;
cbPtr = cbPtr->nextPtr) {
if ((cbPtr->proc == proc) && (cbPtr->clientData == clientData)) {
if (cbPrevPtr == (CloseCallback *) NULL) {
chanPtr->closeCbPtr = cbPtr->nextPtr;
} else {
cbPrevPtr = cbPtr->nextPtr;
}
ckfree((char *) cbPtr);
break;
} else {
cbPrevPtr = cbPtr;
}
}
}
/*
*----------------------------------------------------------------------
*
* CloseChannelsOnExit --
*
* Closes all the existing channels, on exit. This routine is called
* during exit processing.
*
* Results:
* None.
*
* Side effects:
* Closes all channels.
*
*----------------------------------------------------------------------
*/
/* ARGSUSED */
static void
CloseChannelsOnExit(clientData)
ClientData clientData; /* NULL - unused. */
{
Channel *chanPtr; /* Iterates over open channels. */
Channel *nextChanPtr; /* Iterates over open channels. */
for (chanPtr = firstChanPtr; chanPtr != (Channel *) NULL;
chanPtr = nextChanPtr) {
nextChanPtr = chanPtr->nextChanPtr;
/*
* Set the channel back into blocking mode to ensure that we wait
* for all data to flush out.
*/
(void) Tcl_SetChannelOption(NULL, (Tcl_Channel) chanPtr,
"-blocking", "on");
if (chanPtr->refCount <= 0) {
/*
* Close it only if the refcount indicates that the channel is not
* referenced from any interpreter. If it is, that interpreter will
* close the channel when it gets destroyed.
*/
Tcl_Close((Tcl_Interp *) NULL, (Tcl_Channel) chanPtr);
} else {
/*
* The refcount is greater than zero, so flush the channel.
*/
Tcl_Flush((Tcl_Channel) chanPtr);
/*
* And close the OS level handles using the driver function:
*/
(chanPtr->typePtr->closeProc) (chanPtr->instanceData,
(Tcl_Interp *) NULL);
/*
* Finally, we clean up the fields in the channel data structure
* since all of them have been deleted already. We mark the
* channel with CHANNEL_DEAD to prevent any further IO operations
* on it.
*/
chanPtr->instanceData = (ClientData) NULL;
chanPtr->flags |= CHANNEL_DEAD;
}
}
}
/*
*----------------------------------------------------------------------
*
* GetChannelTable --
*
* Gets and potentially initializes the channel table for an
* interpreter. If it is initializing the table it also inserts
* channels for stdin, stdout and stderr if the interpreter is
* trusted.
*
* Results:
* A pointer to the hash table created, for use by the caller.
*
* Side effects:
* Initializes the channel table for an interpreter. May create
* channels for stdin, stdout and stderr.
*
*----------------------------------------------------------------------
*/
static Tcl_HashTable *
GetChannelTable(interp)
Tcl_Interp *interp;
{
Tcl_HashTable *hTblPtr; /* Hash table of channels. */
Tcl_Channel stdinChan, stdoutChan, stderrChan;
hTblPtr = (Tcl_HashTable *) Tcl_GetAssocData(interp, "tclIO", NULL);
if (hTblPtr == (Tcl_HashTable *) NULL) {
hTblPtr = (Tcl_HashTable *) ckalloc((unsigned) sizeof(Tcl_HashTable));
Tcl_InitHashTable(hTblPtr, TCL_STRING_KEYS);
(void) Tcl_SetAssocData(interp, "tclIO",
(Tcl_InterpDeleteProc *) DeleteChannelTable,
(ClientData) hTblPtr);
/*
* If the interpreter is trusted (not "safe"), insert channels
* for stdin, stdout and stderr (possibly creating them in the
* process).
*/
if (Tcl_IsSafe(interp) == 0) {
stdinChan = Tcl_GetStdChannel(TCL_STDIN);
if (stdinChan != NULL) {
Tcl_RegisterChannel(interp, stdinChan);
}
stdoutChan = Tcl_GetStdChannel(TCL_STDOUT);
if (stdoutChan != NULL) {
Tcl_RegisterChannel(interp, stdoutChan);
}
stderrChan = Tcl_GetStdChannel(TCL_STDERR);
if (stderrChan != NULL) {
Tcl_RegisterChannel(interp, stderrChan);
}
}
}
return hTblPtr;
}
/*
*----------------------------------------------------------------------
*
* DeleteChannelTable --
*
* Deletes the channel table for an interpreter, closing any open
* channels whose refcount reaches zero. This procedure is invoked
* when an interpreter is deleted, via the AssocData cleanup
* mechanism.
*
* Results:
* None.
*
* Side effects:
* Deletes the hash table of channels. May close channels. May flush
* output on closed channels. Removes any channeEvent handlers that were
* registered in this interpreter.
*
*----------------------------------------------------------------------
*/
static void
DeleteChannelTable(clientData, interp)
ClientData clientData; /* The per-interpreter data structure. */
Tcl_Interp *interp; /* The interpreter being deleted. */
{
Tcl_HashTable *hTblPtr; /* The hash table. */
Tcl_HashSearch hSearch; /* Search variable. */
Tcl_HashEntry *hPtr; /* Search variable. */
Channel *chanPtr; /* Channel being deleted. */
EventScriptRecord *sPtr, *prevPtr, *nextPtr;
/* Variables to loop over all channel events
* registered, to delete the ones that refer
* to the interpreter being deleted. */
/*
* Delete all the registered channels - this will close channels whose
* refcount reaches zero.
*/
hTblPtr = (Tcl_HashTable *) clientData;
for (hPtr = Tcl_FirstHashEntry(hTblPtr, &hSearch);
hPtr != (Tcl_HashEntry *) NULL;
hPtr = Tcl_FirstHashEntry(hTblPtr, &hSearch)) {
chanPtr = (Channel *) Tcl_GetHashValue(hPtr);
/*
* Remove any fileevents registered in this interpreter.
*/
for (sPtr = chanPtr->scriptRecordPtr,
prevPtr = (EventScriptRecord *) NULL;
sPtr != (EventScriptRecord *) NULL;
sPtr = nextPtr) {
nextPtr = sPtr->nextPtr;
if (sPtr->interp == interp) {
if (prevPtr == (EventScriptRecord *) NULL) {
chanPtr->scriptRecordPtr = nextPtr;
} else {
prevPtr->nextPtr = nextPtr;
}
Tcl_DeleteChannelHandler((Tcl_Channel) chanPtr,
ChannelEventScriptInvoker, (ClientData) sPtr);
Tcl_EventuallyFree((ClientData) sPtr->script, TCL_DYNAMIC);
ckfree((char *) sPtr);
} else {
prevPtr = sPtr;
}
}
/*
* Cannot call Tcl_UnregisterChannel because that procedure calls
* Tcl_GetAssocData to get the channel table, which might already
* be inaccessible from the interpreter structure. Instead, we
* emulate the behavior of Tcl_UnregisterChannel directly here.
*/
Tcl_DeleteHashEntry(hPtr);
chanPtr->refCount--;
if (chanPtr->refCount <= 0) {
if (!(chanPtr->flags & BG_FLUSH_SCHEDULED)) {
Tcl_Close(interp, (Tcl_Channel) chanPtr);
}
}
}
Tcl_DeleteHashTable(hTblPtr);
ckfree((char *) hTblPtr);
}
/*
*----------------------------------------------------------------------
*
* CheckForStdChannelsBeingClosed --
*
* Perform special handling for standard channels being closed. When
* given a standard channel, if the refcount is now 1, it means that
* the last reference to the standard channel is being explicitly
* closed. Now bump the refcount artificially down to 0, to ensure the
* normal handling of channels being closed will occur. Also reset the
* static pointer to the channel to NULL, to avoid dangling references.
*
* Results:
* None.
*
* Side effects:
* Manipulates the refcount on standard channels. May smash the global
* static pointer to a standard channel.
*
*----------------------------------------------------------------------
*/
static void
CheckForStdChannelsBeingClosed(chan)
Tcl_Channel chan;
{
Channel *chanPtr = (Channel *) chan;
if ((chan == stdinChannel) && (stdinInitialized)) {
if (chanPtr->refCount < 2) {
chanPtr->refCount = 0;
stdinChannel = NULL;
return;
}
} else if ((chan == stdoutChannel) && (stdoutInitialized)) {
if (chanPtr->refCount < 2) {
chanPtr->refCount = 0;
stdoutChannel = NULL;
return;
}
} else if ((chan == stderrChannel) && (stderrInitialized)) {
if (chanPtr->refCount < 2) {
chanPtr->refCount = 0;
stderrChannel = NULL;
return;
}
}
}
/*
*----------------------------------------------------------------------
*
* Tcl_UnregisterChannel --
*
* Deletes the hash entry for a channel associated with an interpreter.
* If the interpreter given as argument is NULL, it only decrements the
* reference count.
*
* Results:
* A standard Tcl result.
*
* Side effects:
* Deletes the hash entry for a channel associated with an interpreter.
*
*----------------------------------------------------------------------
*/
int
Tcl_UnregisterChannel(interp, chan)
Tcl_Interp *interp; /* Interpreter in which channel is defined. */
Tcl_Channel chan; /* Channel to delete. */
{
Tcl_HashTable *hTblPtr; /* Hash table of channels. */
Tcl_HashEntry *hPtr; /* Search variable. */
Channel *chanPtr; /* The real IO channel. */
chanPtr = (Channel *) chan;
if (interp != (Tcl_Interp *) NULL) {
hTblPtr = (Tcl_HashTable *) Tcl_GetAssocData(interp, "tclIO", NULL);
if (hTblPtr == (Tcl_HashTable *) NULL) {
return TCL_OK;
}
hPtr = Tcl_FindHashEntry(hTblPtr, chanPtr->channelName);
if (hPtr == (Tcl_HashEntry *) NULL) {
return TCL_OK;
}
if ((Channel *) Tcl_GetHashValue(hPtr) != chanPtr) {
return TCL_OK;
}
Tcl_DeleteHashEntry(hPtr);
/*
* Remove channel handlers that refer to this interpreter, so that they
* will not be present if the actual close is delayed and more events
* happen on the channel. This may occur if the channel is shared
* between several interpreters, or if the channel has async
* flushing active.
*/
CleanupChannelHandlers(interp, chanPtr);
}
chanPtr->refCount--;
/*
* Perform special handling for standard channels being closed. If the
* refCount is now 1 it means that the last reference to the standard
* channel is being explicitly closed, so bump the refCount down
* artificially to 0. This will ensure that the channel is actually
* closed, below. Also set the static pointer to NULL for the channel.
*/
CheckForStdChannelsBeingClosed(chan);
/*
* If the refCount reached zero, close the actual channel.
*/
if (chanPtr->refCount <= 0) {
/*
* Ensure that if there is another buffer, it gets flushed
* whether or not we are doing a background flush.
*/
if ((chanPtr->curOutPtr != NULL) &&
(chanPtr->curOutPtr->nextAdded >
chanPtr->curOutPtr->nextRemoved)) {
chanPtr->flags |= BUFFER_READY;
}
chanPtr->flags |= CHANNEL_CLOSED;
if (!(chanPtr->flags & BG_FLUSH_SCHEDULED)) {
if (Tcl_Close(interp, chan) != TCL_OK) {
return TCL_ERROR;
}
}
}
return TCL_OK;
}
/*
*----------------------------------------------------------------------
*
* Tcl_RegisterChannel --
*
* Adds an already-open channel to the channel table of an interpreter.
* If the interpreter passed as argument is NULL, it only increments
* the channel refCount.
*
* Results:
* None.
*
* Side effects:
* May increment the reference count of a channel.
*
*----------------------------------------------------------------------
*/
void
Tcl_RegisterChannel(interp, chan)
Tcl_Interp *interp; /* Interpreter in which to add the channel. */
Tcl_Channel chan; /* The channel to add to this interpreter
* channel table. */
{
Tcl_HashTable *hTblPtr; /* Hash table of channels. */
Tcl_HashEntry *hPtr; /* Search variable. */
int new; /* Is the hash entry new or does it exist? */
Channel *chanPtr; /* The actual channel. */
chanPtr = (Channel *) chan;
if (chanPtr->channelName == (char *) NULL) {
panic("Tcl_RegisterChannel: channel without name");
}
if (interp != (Tcl_Interp *) NULL) {
hTblPtr = GetChannelTable(interp);
hPtr = Tcl_CreateHashEntry(hTblPtr, chanPtr->channelName, &new);
if (new == 0) {
if (chan == (Tcl_Channel) Tcl_GetHashValue(hPtr)) {
return;
}
panic("Tcl_RegisterChannel: duplicate channel names");
}
Tcl_SetHashValue(hPtr, (ClientData) chanPtr);
}
chanPtr->refCount++;
}
/*
*----------------------------------------------------------------------
*
* Tcl_GetChannel --
*
* Finds an existing Tcl_Channel structure by name in a given
* interpreter. This function is public because it is used by
* channel-type-specific functions.
*
* Results:
* A Tcl_Channel or NULL on failure. If failed, interp->result
* contains an error message. It also returns, in modePtr, the
* modes in which the channel is opened.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
Tcl_Channel
Tcl_GetChannel(interp, chanName, modePtr)
Tcl_Interp *interp; /* Interpreter in which to find or create
* the channel. */
char *chanName; /* The name of the channel. */
int *modePtr; /* Where to store the mode in which the
* channel was opened? Will contain an ORed
* combination of TCL_READABLE and
* TCL_WRITABLE, if non-NULL. */
{
Channel *chanPtr; /* The actual channel. */
Tcl_HashTable *hTblPtr; /* Hash table of channels. */
Tcl_HashEntry *hPtr; /* Search variable. */
char *name; /* Translated name. */
/*
* Substitute "stdin", etc. Note that even though we immediately
* find the channel using Tcl_GetStdChannel, we still need to look
* it up in the specified interpreter to ensure that it is present
* in the channel table. Otherwise, safe interpreters would always
* have access to the standard channels.
*/
name = chanName;
if ((chanName[0] == 's') && (chanName[1] == 't')) {
chanPtr = NULL;
if (strcmp(chanName, "stdin") == 0) {
chanPtr = (Channel *)Tcl_GetStdChannel(TCL_STDIN);
} else if (strcmp(chanName, "stdout") == 0) {
chanPtr = (Channel *)Tcl_GetStdChannel(TCL_STDOUT);
} else if (strcmp(chanName, "stderr") == 0) {
chanPtr = (Channel *)Tcl_GetStdChannel(TCL_STDERR);
}
if (chanPtr != NULL) {
name = chanPtr->channelName;
}
}
hTblPtr = GetChannelTable(interp);
hPtr = Tcl_FindHashEntry(hTblPtr, name);
if (hPtr == (Tcl_HashEntry *) NULL) {
Tcl_AppendResult(interp, "can not find channel named \"",
chanName, "\"", (char *) NULL);
return NULL;
}
chanPtr = (Channel *) Tcl_GetHashValue(hPtr);
if (modePtr != NULL) {
*modePtr = (chanPtr->flags & (TCL_READABLE|TCL_WRITABLE));
}
return (Tcl_Channel) chanPtr;
}
/*
*----------------------------------------------------------------------
*
* Tcl_CreateChannel --
*
* Creates a new entry in the hash table for a Tcl_Channel
* record.
*
* Results:
* Returns the new Tcl_Channel.
*
* Side effects:
* Creates a new Tcl_Channel instance and inserts it into the
* hash table.
*
*----------------------------------------------------------------------
*/
Tcl_Channel
Tcl_CreateChannel(typePtr, chanName, instanceData, mask)
Tcl_ChannelType *typePtr; /* The channel type record. */
char *chanName; /* Name of channel to record. */
ClientData instanceData; /* Instance specific data. */
int mask; /* TCL_READABLE & TCL_WRITABLE to indicate
* if the channel is readable, writable. */
{
Channel *chanPtr; /* The channel structure newly created. */
chanPtr = (Channel *) ckalloc((unsigned) sizeof(Channel));
if (chanName != (char *) NULL) {
chanPtr->channelName = ckalloc((unsigned) (strlen(chanName) + 1));
strcpy(chanPtr->channelName, chanName);
} else {
panic("Tcl_CreateChannel: NULL channel name");
}
chanPtr->flags = mask;
/*
* Set the channel up initially in AUTO input translation mode to
* accept "\n", "\r" and "\r\n". Output translation mode is set to
* a platform specific default value. The eofChar is set to 0 for both
* input and output, so that Tcl does not look for an in-file EOF
* indicator (e.g. ^Z) and does not append an EOF indicator to files.
*/
chanPtr->inputTranslation = TCL_TRANSLATE_AUTO;
chanPtr->outputTranslation = TCL_PLATFORM_TRANSLATION;
chanPtr->inEofChar = 0;
chanPtr->outEofChar = 0;
chanPtr->unreportedError = 0;
chanPtr->instanceData = instanceData;
chanPtr->typePtr = typePtr;
chanPtr->refCount = 0;
chanPtr->closeCbPtr = (CloseCallback *) NULL;
chanPtr->curOutPtr = (ChannelBuffer *) NULL;
chanPtr->outQueueHead = (ChannelBuffer *) NULL;
chanPtr->outQueueTail = (ChannelBuffer *) NULL;
chanPtr->saveInBufPtr = (ChannelBuffer *) NULL;
chanPtr->inQueueHead = (ChannelBuffer *) NULL;
chanPtr->inQueueTail = (ChannelBuffer *) NULL;
chanPtr->chPtr = (ChannelHandler *) NULL;
chanPtr->interestMask = 0;
chanPtr->scriptRecordPtr = (EventScriptRecord *) NULL;
chanPtr->bufSize = CHANNELBUFFER_DEFAULT_SIZE;
/*
* Link the channel into the list of all channels; create an on-exit
* handler if there is not one already, to close off all the channels
* in the list on exit.
*/
chanPtr->nextChanPtr = firstChanPtr;
firstChanPtr = chanPtr;
if (!channelExitHandlerCreated) {
channelExitHandlerCreated = 1;
Tcl_CreateExitHandler(CloseChannelsOnExit, (ClientData) NULL);
}
/*
* Install this channel in the first empty standard channel slot, if
* the channel was previously closed explicitly.
*/
if ((stdinChannel == NULL) && (stdinInitialized == 1)) {
Tcl_SetStdChannel((Tcl_Channel)chanPtr, TCL_STDIN);
Tcl_RegisterChannel((Tcl_Interp *) NULL, (Tcl_Channel) chanPtr);
} else if ((stdoutChannel == NULL) && (stdoutInitialized == 1)) {
Tcl_SetStdChannel((Tcl_Channel)chanPtr, TCL_STDOUT);
Tcl_RegisterChannel((Tcl_Interp *) NULL, (Tcl_Channel) chanPtr);
} else if ((stderrChannel == NULL) && (stderrInitialized == 1)) {
Tcl_SetStdChannel((Tcl_Channel)chanPtr, TCL_STDERR);
Tcl_RegisterChannel((Tcl_Interp *) NULL, (Tcl_Channel) chanPtr);
}
return (Tcl_Channel) chanPtr;
}
/*
*----------------------------------------------------------------------
*
* Tcl_GetChannelMode --
*
* Computes a mask indicating whether the channel is open for
* reading and writing.
*
* Results:
* An OR-ed combination of TCL_READABLE and TCL_WRITABLE.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
int
Tcl_GetChannelMode(chan)
Tcl_Channel chan; /* The channel for which the mode is
* being computed. */
{
Channel *chanPtr; /* The actual channel. */
chanPtr = (Channel *) chan;
return (chanPtr->flags & (TCL_READABLE | TCL_WRITABLE));
}
/*
*----------------------------------------------------------------------
*
* Tcl_GetChannelName --
*
* Returns the string identifying the channel name.
*
* Results:
* The string containing the channel name. This memory is
* owned by the generic layer and should not be modified by
* the caller.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
char *
Tcl_GetChannelName(chan)
Tcl_Channel chan; /* The channel for which to return the name. */
{
Channel *chanPtr; /* The actual channel. */
chanPtr = (Channel *) chan;
return chanPtr->channelName;
}
/*
*----------------------------------------------------------------------
*
* Tcl_GetChannelType --
*
* Given a channel structure, returns the channel type structure.
*
* Results:
* Returns a pointer to the channel type structure.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
Tcl_ChannelType *
Tcl_GetChannelType(chan)
Tcl_Channel chan; /* The channel to return type for. */
{
Channel *chanPtr; /* The actual channel. */
chanPtr = (Channel *) chan;
return chanPtr->typePtr;
}
/*
*----------------------------------------------------------------------
*
* Tcl_GetChannelFile --
*
* Returns a file associated with a channel.
*
* Results:
* The file or NULL if failed (e.g. the channel is not open for the
* requested direction).
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
Tcl_File
Tcl_GetChannelFile(chan, direction)
Tcl_Channel chan; /* The channel to get file from. */
int direction; /* TCL_WRITABLE or TCL_READABLE. */
{
Channel *chanPtr; /* The actual channel. */
chanPtr = (Channel *) chan;
return (chanPtr->typePtr->getFileProc) (chanPtr->instanceData, direction);
}
/*
*----------------------------------------------------------------------
*
* Tcl_GetChannelInstanceData --
*
* Returns the client data associated with a channel.
*
* Results:
* The client data.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
ClientData
Tcl_GetChannelInstanceData(chan)
Tcl_Channel chan; /* Channel for which to return client data. */
{
Channel *chanPtr; /* The actual channel. */
chanPtr = (Channel *) chan;
return chanPtr->instanceData;
}
/*
*----------------------------------------------------------------------
*
* RecycleBuffer --
*
* Helper function to recycle input and output buffers. Ensures
* that two input buffers are saved (one in the input queue and
* another in the saveInBufPtr field) and that curOutPtr is set
* to a buffer. Only if these conditions are met is the buffer
* freed to the OS.
*
* Results:
* None.
*
* Side effects:
* May free a buffer to the OS.
*
*----------------------------------------------------------------------
*/
static void
RecycleBuffer(chanPtr, bufPtr, mustDiscard)
Channel *chanPtr; /* Channel for which to recycle buffers. */
ChannelBuffer *bufPtr; /* The buffer to recycle. */
int mustDiscard; /* If nonzero, free the buffer to the
* OS, always. */
{
/*
* Do we have to free the buffer to the OS?
*/
if (mustDiscard) {
ckfree((char *) bufPtr);
return;
}
/*
* Only save buffers for the input queue if the channel is readable.
*/
if (chanPtr->flags & TCL_READABLE) {
if (chanPtr->inQueueHead == (ChannelBuffer *) NULL) {
chanPtr->inQueueHead = bufPtr;
chanPtr->inQueueTail = bufPtr;
goto keepit;
}
if (chanPtr->saveInBufPtr == (ChannelBuffer *) NULL) {
chanPtr->saveInBufPtr = bufPtr;
goto keepit;
}
}
/*
* Only save buffers for the output queue if the channel is writable.
*/
if (chanPtr->flags & TCL_WRITABLE) {
if (chanPtr->curOutPtr == (ChannelBuffer *) NULL) {
chanPtr->curOutPtr = bufPtr;
goto keepit;
}
}
/*
* If we reached this code we return the buffer to the OS.
*/
ckfree((char *) bufPtr);
return;
keepit:
bufPtr->nextRemoved = 0;
bufPtr->nextAdded = 0;
bufPtr->nextPtr = (ChannelBuffer *) NULL;
}
/*
*----------------------------------------------------------------------
*
* DiscardOutputQueued --
*
* Discards all output queued in the output queue of a channel.
*
* Results:
* None.
*
* Side effects:
* Recycles buffers.
*
*----------------------------------------------------------------------
*/
static void
DiscardOutputQueued(chanPtr)
Channel *chanPtr; /* The channel for which to discard output. */
{
ChannelBuffer *bufPtr;
while (chanPtr->outQueueHead != (ChannelBuffer *) NULL) {
bufPtr = chanPtr->outQueueHead;
chanPtr->outQueueHead = bufPtr->nextPtr;
RecycleBuffer(chanPtr, bufPtr, 0);
}
chanPtr->outQueueHead = (ChannelBuffer *) NULL;
chanPtr->outQueueTail = (ChannelBuffer *) NULL;
}
/*
*----------------------------------------------------------------------
*
* FlushChannel --
*
* This function flushes as much of the queued output as is possible
* now. If calledFromAsyncFlush is nonzero, it is being called in an
* event handler to flush channel output asynchronously.
*
* Results:
* 0 if successful, else the error code that was returned by the
* channel type operation.
*
* Side effects:
* May produce output on a channel. May block indefinitely if the
* channel is synchronous. May schedule an async flush on the channel.
* May recycle memory for buffers in the output queue.
*
*----------------------------------------------------------------------
*/
static int
FlushChannel(interp, chanPtr, calledFromAsyncFlush)
Tcl_Interp *interp; /* For error reporting during close. */
Channel *chanPtr; /* The channel to flush on. */
int calledFromAsyncFlush; /* If nonzero then we are being
* called from an asynchronous
* flush callback. */
{
ChannelBuffer *bufPtr; /* Iterates over buffered output
* queue. */
int toWrite; /* Amount of output data in current
* buffer available to be written. */
int written; /* Amount of output data actually
* written in current round. */
int errorCode; /* Stores POSIX error codes from
* channel driver operations. */
Tcl_File outFile; /* The contained Tcl_File for output
* on this channel. Used for waiting
* for the channel to become writable,
* or to schedule an async flush. */
errorCode = 0;
/*
* Prevent writing on a dead channel -- a channel that has been closed
* but not yet deallocated. This can occur if the exit handler for the
* channel deallocation runs before all channels are deregistered in
* all interpreters.
*/
if (chanPtr->flags & CHANNEL_DEAD) {
Tcl_SetErrno(EINVAL);
return -1;
}
/*
* Loop over the queued buffers and attempt to flush as
* much as possible of the queued output to the channel.
*/
while (1) {
/*
* If the queue is empty and there is a ready current buffer, OR if
* the current buffer is full, then move the current buffer to the
* queue.
*/
if (((chanPtr->curOutPtr != (ChannelBuffer *) NULL) &&
(chanPtr->curOutPtr->nextAdded == chanPtr->curOutPtr->bufSize))
|| ((chanPtr->flags & BUFFER_READY) &&
(chanPtr->outQueueHead == (ChannelBuffer *) NULL))) {
chanPtr->flags &= (~(BUFFER_READY));
chanPtr->curOutPtr->nextPtr = (ChannelBuffer *) NULL;
if (chanPtr->outQueueHead == (ChannelBuffer *) NULL) {
chanPtr->outQueueHead = chanPtr->curOutPtr;
} else {
chanPtr->outQueueTail->nextPtr = chanPtr->curOutPtr;
}
chanPtr->outQueueTail = chanPtr->curOutPtr;
chanPtr->curOutPtr = (ChannelBuffer *) NULL;
}
bufPtr = chanPtr->outQueueHead;
/*
* If we are not being called from an async flush and an async
* flush is active, we just return without producing any output.
*/
if ((!calledFromAsyncFlush) &&
(chanPtr->flags & BG_FLUSH_SCHEDULED)) {
return 0;
}
/*
* If the output queue is still empty, break out of the while loop.
*/
if (bufPtr == (ChannelBuffer *) NULL) {
break; /* Out of the "while (1)". */
}
/*
* Produce the output on the channel.
*/
toWrite = bufPtr->nextAdded - bufPtr->nextRemoved;
written = (chanPtr->typePtr->outputProc) (chanPtr->instanceData,
bufPtr->buf + bufPtr->nextRemoved, toWrite, &errorCode);
/*
* If the write failed completely attempt to start the asynchronous
* flush mechanism and break out of this loop - do not attempt to
* write any more output at this time.
*/
if (written < 0) {
/*
* If the last attempt to write was interrupted, simply retry.
*/
if (errorCode == EINTR) {
errorCode = 0;
continue;
}
/*
* If we would have blocked, attempt to set up an asynchronous
* background flushing for this channel if the channel is
* nonblocking, or block until more output can be written if
* the channel is blocking.
*/
if ((errorCode == EWOULDBLOCK) || (errorCode == EAGAIN)) {
outFile = Tcl_GetChannelFile((Tcl_Channel) chanPtr,
TCL_WRITABLE);
if (outFile == (Tcl_File) NULL) {
WaitForChannel(chanPtr, TCL_WRITABLE, -1);
} else if (chanPtr->flags & CHANNEL_NONBLOCKING) {
if (!(chanPtr->flags & BG_FLUSH_SCHEDULED)) {
Tcl_CreateFileHandler(outFile, TCL_WRITABLE,
FlushEventProc, (ClientData) chanPtr);
}
chanPtr->flags |= BG_FLUSH_SCHEDULED;
errorCode = 0;
break; /* Out of the "while (1)" loop. */
} else {
/*
* If the device driver did not emulate blocking behavior
* then we must do it it here.
*/
WaitForChannel(chanPtr, TCL_WRITABLE, -1);
errorCode = 0;
continue;
}
}
/*
* Decide whether to report the error upwards or defer it. If
* we got an error during async flush we discard all queued
* output.
*/
if (calledFromAsyncFlush) {
if (chanPtr->unreportedError == 0) {
chanPtr->unreportedError = errorCode;
}
} else {
Tcl_SetErrno(errorCode);
}
/*
* When we get an error we throw away all the output
* currently queued.
*/
DiscardOutputQueued(chanPtr);
continue;
}
bufPtr->nextRemoved += written;
/*
* If this buffer is now empty, recycle it.
*/
if (bufPtr->nextRemoved == bufPtr->nextAdded) {
chanPtr->outQueueHead = bufPtr->nextPtr;
if (chanPtr->outQueueHead == (ChannelBuffer *) NULL) {
chanPtr->outQueueTail = (ChannelBuffer *) NULL;
}
RecycleBuffer(chanPtr, bufPtr, 0);
}
} /* Closes "while (1)". */
/*
* If the queue became empty and we have an asynchronous flushing
* mechanism active, cancel the asynchronous flushing.
*/
if ((chanPtr->outQueueHead == (ChannelBuffer *) NULL) &&
(chanPtr->flags & BG_FLUSH_SCHEDULED)) {
chanPtr->flags &= (~(BG_FLUSH_SCHEDULED));
outFile = Tcl_GetChannelFile((Tcl_Channel) chanPtr, TCL_WRITABLE);
if (outFile != (Tcl_File) NULL) {
Tcl_DeleteFileHandler(outFile);
}
}
/*
* If the channel is flagged as closed, delete it when the refCount
* drops to zero, the output queue is empty and there is no output
* in the current output buffer.
*/
if ((chanPtr->flags & CHANNEL_CLOSED) && (chanPtr->refCount <= 0) &&
(chanPtr->outQueueHead == (ChannelBuffer *) NULL) &&
((chanPtr->curOutPtr == (ChannelBuffer *) NULL) ||
(chanPtr->curOutPtr->nextAdded ==
chanPtr->curOutPtr->nextRemoved))) {
return CloseChannel(interp, chanPtr, errorCode);
}
return errorCode;
}
/*
*----------------------------------------------------------------------
*
* CloseChannel --
*
* Utility procedure to close a channel and free its associated
* resources.
*
* Results:
* 0 on success or a POSIX error code if the operation failed.
*
* Side effects:
* May close the actual channel; may free memory.
*
*----------------------------------------------------------------------
*/
static int
CloseChannel(interp, chanPtr, errorCode)
Tcl_Interp *interp; /* For error reporting. */
Channel *chanPtr; /* The channel to close. */
int errorCode; /* Status of operation so far. */
{
int result = 0; /* Of calling driver close
* operation. */
Channel *prevChanPtr; /* Preceding channel in list of
* all channels - used to splice a
* channel out of the list on close. */
if (chanPtr == NULL) {
return 0;
}
/*
* No more input can be consumed so discard any leftover input.
*/
DiscardInputQueued(chanPtr, 1);
/*
* Discard a leftover buffer in the current output buffer field.
*/
if (chanPtr->curOutPtr != (ChannelBuffer *) NULL) {
ckfree((char *) chanPtr->curOutPtr);
chanPtr->curOutPtr = (ChannelBuffer *) NULL;
}
/*
* The caller guarantees that there are no more buffers
* queued for output.
*/
if (chanPtr->outQueueHead != (ChannelBuffer *) NULL) {
panic("TclFlush, closed channel: queued output left");
}
/*
* If the EOF character is set in the channel, append that to the
* output device.
*/
if ((chanPtr->outEofChar != 0) && (chanPtr->flags & TCL_WRITABLE)) {
int dummy;
char c;
c = (char) chanPtr->outEofChar;
(chanPtr->typePtr->outputProc) (chanPtr->instanceData, &c, 1, &dummy);
}
/*
* Remove TCL_READABLE and TCL_WRITABLE from chanPtr->flags, so
* that close callbacks can not do input or output (assuming they
* squirreled the channel away in their clientData). This also
* prevents infinite loops if the callback calls any C API that
* could call FlushChannel.
*/
chanPtr->flags &= (~(TCL_READABLE|TCL_WRITABLE));
/*
* Splice this channel out of the list of all channels.
*/
if (chanPtr == firstChanPtr) {
firstChanPtr = chanPtr->nextChanPtr;
} else {
for (prevChanPtr = firstChanPtr;
(prevChanPtr != (Channel *) NULL) &&
(prevChanPtr->nextChanPtr != chanPtr);
prevChanPtr = prevChanPtr->nextChanPtr) {
/* Empty loop body. */
}
if (prevChanPtr == (Channel *) NULL) {
panic("FlushChannel: damaged channel list");
}
prevChanPtr->nextChanPtr = chanPtr->nextChanPtr;
}
/*
* OK, close the channel itself.
*/
result = (chanPtr->typePtr->closeProc) (chanPtr->instanceData, interp);
if (chanPtr->channelName != (char *) NULL) {
ckfree(chanPtr->channelName);
}
/*
* If we are being called synchronously, report either
* any latent error on the channel or the current error.
*/
if (chanPtr->unreportedError != 0) {
errorCode = chanPtr->unreportedError;
}
if (errorCode == 0) {
errorCode = result;
if (errorCode != 0) {
Tcl_SetErrno(errorCode);
}
}
Tcl_EventuallyFree((ClientData) chanPtr, TCL_DYNAMIC);
return errorCode;
}
/*
*----------------------------------------------------------------------
*
* Tcl_Close --
*
* Closes a channel.
*
* Results:
* A standard Tcl result.
*
* Side effects:
* Closes the channel if this is the last reference.
*
* NOTE:
* Tcl_Close removes the channel as far as the user is concerned.
* However, it may continue to exist for a while longer if it has
* a background flush scheduled. The device itself is eventually
* closed and the channel record removed, in CloseChannel, above.
*
*----------------------------------------------------------------------
*/
/* ARGSUSED */
int
Tcl_Close(interp, chan)
Tcl_Interp *interp; /* Interpreter for errors. */
Tcl_Channel chan; /* The channel being closed. Must
* not be referenced in any
* interpreter. */
{
ChannelHandler *chPtr, *chNext; /* Iterate over channel handlers. */
CloseCallback *cbPtr; /* Iterate over close callbacks
* for this channel. */
EventScriptRecord *ePtr, *eNextPtr; /* Iterate over eventscript records. */
Channel *chanPtr; /* The real IO channel. */
int result; /* Of calling FlushChannel. */
/*
* Perform special handling for standard channels being closed. If the
* refCount is now 1 it means that the last reference to the standard
* channel is being explicitly closed, so bump the refCount down
* artificially to 0. This will ensure that the channel is actually
* closed, below. Also set the static pointer to NULL for the channel.
*/
CheckForStdChannelsBeingClosed(chan);
chanPtr = (Channel *) chan;
if (chanPtr->refCount > 0) {
panic("called Tcl_Close on channel with refCount > 0");
}
/*
* Remove all the channel handler records attached to the channel
* itself.
*/
for (chPtr = chanPtr->chPtr;
chPtr != (ChannelHandler *) NULL;
chPtr = chNext) {
chNext = chPtr->nextPtr;
ckfree((char *) chPtr);
}
chanPtr->chPtr = (ChannelHandler *) NULL;
/*
* Must set the interest mask now to 0, otherwise infinite loops
* will occur if Tcl_DoOneEvent is called before the channel is
* finally deleted in FlushChannel. This can happen if the channel
* has a background flush active.
*/
chanPtr->interestMask = 0;
/*
* Remove any EventScript records for this channel.
*/
for (ePtr = chanPtr->scriptRecordPtr;
ePtr != (EventScriptRecord *) NULL;
ePtr = eNextPtr) {
eNextPtr = ePtr->nextPtr;
Tcl_EventuallyFree((ClientData)ePtr->script, TCL_DYNAMIC);
ckfree((char *) ePtr);
}
chanPtr->scriptRecordPtr = (EventScriptRecord *) NULL;
/*
* Invoke the registered close callbacks and delete their records.
*/
while (chanPtr->closeCbPtr != (CloseCallback *) NULL) {
cbPtr = chanPtr->closeCbPtr;
chanPtr->closeCbPtr = cbPtr->nextPtr;
(cbPtr->proc) (cbPtr->clientData);
ckfree((char *) cbPtr);
}
/*
* And remove any events for this channel from the event queue.
*/
Tcl_DeleteEvents(ChannelEventDeleteProc, (ClientData) chanPtr);
/*
* Ensure that the last output buffer will be flushed.
*/
if ((chanPtr->curOutPtr != (ChannelBuffer *) NULL) &&
(chanPtr->curOutPtr->nextAdded > chanPtr->curOutPtr->nextRemoved)) {
chanPtr->flags |= BUFFER_READY;
}
/*
* The call to FlushChannel will flush any queued output and invoke
* the close function of the channel driver, or it will set up the
* channel to be flushed and closed asynchronously.
*/
chanPtr->flags |= CHANNEL_CLOSED;
result = FlushChannel(interp, chanPtr, 0);
if (result != 0) {
return TCL_ERROR;
}
return TCL_OK;
}
/*
*----------------------------------------------------------------------
*
* ChannelEventDeleteProc --
*
* This procedure returns 1 if the event passed in is for the
* channel passed in as the second argument. This procedure is
* used as a filter for events to delete in a call to
* Tcl_DeleteEvents in CloseChannel.
*
* Results:
* 1 if matching, 0 otherwise.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
static int
ChannelEventDeleteProc(evPtr, clientData)
Tcl_Event *evPtr; /* The event to check for a match. */
ClientData clientData; /* The channel to check for. */
{
ChannelHandlerEvent *cEvPtr;
Channel *chanPtr;
if (evPtr->proc != ChannelHandlerEventProc) {
return 0;
}
cEvPtr = (ChannelHandlerEvent *) evPtr;
chanPtr = (Channel *) clientData;
if (cEvPtr->chanPtr != chanPtr) {
return 0;
}
return 1;
}
/*
*----------------------------------------------------------------------
*
* Tcl_Write --
*
* Puts a sequence of characters into an output buffer, may queue the
* buffer for output if it gets full, and also remembers whether the
* current buffer is ready e.g. if it contains a newline and we are in
* line buffering mode.
*
* Results:
* The number of bytes written or -1 in case of error. If -1,
* Tcl_GetErrno will return the error code.
*
* Side effects:
* May buffer up output and may cause output to be produced on the
* channel.
*
*----------------------------------------------------------------------
*/
int
Tcl_Write(chan, srcPtr, slen)
Tcl_Channel chan; /* The channel to buffer output for. */
char *srcPtr; /* Output to buffer. */
int slen; /* Its length. Negative means
* the output is null terminated
* and we must compute its length. */
{
Channel *chanPtr; /* The actual channel. */
ChannelBuffer *outBufPtr; /* Current output buffer. */
int foundNewline; /* Did we find a newline in output? */
char *dPtr, *sPtr; /* Search variables for newline. */
int crsent; /* In CRLF eol translation mode,
* remember the fact that a CR was
* output to the channel without
* its following NL. */
int i; /* Loop index for newline search. */
int destCopied; /* How many bytes were used in this
* destination buffer to hold the
* output? */
int totalDestCopied; /* How many bytes total were
* copied to the channel buffer? */
int srcCopied; /* How many bytes were copied from
* the source string? */
char *destPtr; /* Where in line to copy to? */
chanPtr = (Channel *) chan;
/*
* Check for unreported error.
*/
if (chanPtr->unreportedError != 0) {
Tcl_SetErrno(chanPtr->unreportedError);
chanPtr->unreportedError = 0;
return -1;
}
/*
* If the channel is not open for writing punt.
*/
if (!(chanPtr->flags & TCL_WRITABLE)) {
Tcl_SetErrno(EACCES);
return -1;
}
/*
* If length passed is negative, assume that the output is null terminated
* and compute its length.
*/
if (slen < 0) {
slen = strlen(srcPtr);
}
/*
* If we are in network (or windows) translation mode, record the fact
* that we have not yet sent a CR to the channel.
*/
crsent = 0;
/*
* Loop filling buffers and flushing them until all output has been
* consumed.
*/
srcCopied = 0;
totalDestCopied = 0;
while (slen > 0) {
/*
* Make sure there is a current output buffer to accept output.
*/
if (chanPtr->curOutPtr == (ChannelBuffer *) NULL) {
chanPtr->curOutPtr = (ChannelBuffer *) ckalloc((unsigned)
(CHANNELBUFFER_HEADER_SIZE + chanPtr->bufSize));
chanPtr->curOutPtr->nextAdded = 0;
chanPtr->curOutPtr->nextRemoved = 0;
chanPtr->curOutPtr->bufSize = chanPtr->bufSize;
chanPtr->curOutPtr->nextPtr = (ChannelBuffer *) NULL;
}
outBufPtr = chanPtr->curOutPtr;
destCopied = outBufPtr->bufSize - outBufPtr->nextAdded;
if (destCopied > slen) {
destCopied = slen;
}
destPtr = outBufPtr->buf + outBufPtr->nextAdded;
switch (chanPtr->outputTranslation) {
case TCL_TRANSLATE_LF:
srcCopied = destCopied;
memcpy((VOID *) destPtr, (VOID *) srcPtr, (size_t) destCopied);
break;
case TCL_TRANSLATE_CR:
srcCopied = destCopied;
memcpy((VOID *) destPtr, (VOID *) srcPtr, (size_t) destCopied);
for (dPtr = destPtr; dPtr < destPtr + destCopied; dPtr++) {
if (*dPtr == '\n') {
*dPtr = '\r';
}
}
break;
case TCL_TRANSLATE_CRLF:
for (srcCopied = 0, dPtr = destPtr, sPtr = srcPtr;
dPtr < destPtr + destCopied;
dPtr++, sPtr++, srcCopied++) {
if (*sPtr == '\n') {
if (crsent) {
*dPtr = '\n';
crsent = 0;
} else {
*dPtr = '\r';
crsent = 1;
sPtr--, srcCopied--;
}
} else {
*dPtr = *sPtr;
}
}
break;
case TCL_TRANSLATE_AUTO:
panic("Tcl_Write: AUTO output translation mode not supported");
default:
panic("Tcl_Write: unknown output translation mode");
}
/*
* The current buffer is ready for output if it is full, or if it
* contains a newline and this channel is line-buffered, or if it
* contains any output and this channel is unbuffered.
*/
outBufPtr->nextAdded += destCopied;
if (!(chanPtr->flags & BUFFER_READY)) {
if (outBufPtr->nextAdded == outBufPtr->bufSize) {
chanPtr->flags |= BUFFER_READY;
} else if (chanPtr->flags & CHANNEL_LINEBUFFERED) {
for (sPtr = srcPtr, i = 0, foundNewline = 0;
(i < srcCopied) && (!foundNewline);
i++, sPtr++) {
if (*sPtr == '\n') {
foundNewline = 1;
break;
}
}
if (foundNewline) {
chanPtr->flags |= BUFFER_READY;
}
} else if (chanPtr->flags & CHANNEL_UNBUFFERED) {
chanPtr->flags |= BUFFER_READY;
}
}
totalDestCopied += srcCopied;
srcPtr += srcCopied;
slen -= srcCopied;
if (chanPtr->flags & BUFFER_READY) {
if (FlushChannel(NULL, chanPtr, 0) != 0) {
return -1;
}
}
} /* Closes "while" */
return totalDestCopied;
}
/*
*----------------------------------------------------------------------
*
* Tcl_Flush --
*
* Flushes output data on a channel.
*
* Results:
* A standard Tcl result.
*
* Side effects:
* May flush output queued on this channel.
*
*----------------------------------------------------------------------
*/
int
Tcl_Flush(chan)
Tcl_Channel chan; /* The Channel to flush. */
{
int result; /* Of calling FlushChannel. */
Channel *chanPtr; /* The actual channel. */
chanPtr = (Channel *) chan;
/*
* Check for unreported error.
*/
if (chanPtr->unreportedError != 0) {
Tcl_SetErrno(chanPtr->unreportedError);
chanPtr->unreportedError = 0;
return TCL_ERROR;
}
/*
* If the channel is not open for writing punt.
*/
if (!(chanPtr->flags & TCL_WRITABLE)) {
Tcl_SetErrno(EACCES);
return TCL_ERROR;
}
/*
* Force current output buffer to be output also.
*/
if ((chanPtr->curOutPtr != (ChannelBuffer *) NULL) &&
(chanPtr->curOutPtr->nextAdded > 0)) {
chanPtr->flags |= BUFFER_READY;
}
result = FlushChannel(NULL, chanPtr, 0);
if (result != 0) {
return TCL_ERROR;
}
return TCL_OK;
}
/*
*----------------------------------------------------------------------
*
* DiscardInputQueued --
*
* Discards any input read from the channel but not yet consumed
* by Tcl reading commands.
*
* Results:
* None.
*
* Side effects:
* May discard input from the channel. If discardLastBuffer is zero,
* leaves one buffer in place for back-filling.
*
*----------------------------------------------------------------------
*/
static void
DiscardInputQueued(chanPtr, discardSavedBuffers)
Channel *chanPtr; /* Channel on which to discard
* the queued input. */
int discardSavedBuffers; /* If non-zero, discard all buffers including
* last one. */
{
ChannelBuffer *bufPtr, *nxtPtr; /* Loop variables. */
bufPtr = chanPtr->inQueueHead;
chanPtr->inQueueHead = (ChannelBuffer *) NULL;
chanPtr->inQueueTail = (ChannelBuffer *) NULL;
for (; bufPtr != (ChannelBuffer *) NULL; bufPtr = nxtPtr) {
nxtPtr = bufPtr->nextPtr;
RecycleBuffer(chanPtr, bufPtr, discardSavedBuffers);
}
/*
* If discardSavedBuffers is nonzero, must also discard any previously
* saved buffer in the saveInBufPtr field.
*/
if (discardSavedBuffers) {
if (chanPtr->saveInBufPtr != (ChannelBuffer *) NULL) {
ckfree((char *) chanPtr->saveInBufPtr);
chanPtr->saveInBufPtr = (ChannelBuffer *) NULL;
}
}
}
/*
*----------------------------------------------------------------------
*
* GetInput --
*
* Reads input data from a device or file into an input buffer.
*
* Results:
* A Posix error code or 0.
*
* Side effects:
* Reads from the underlying device.
*
*----------------------------------------------------------------------
*/
static int
GetInput(chanPtr)
Channel *chanPtr; /* Channel to read input from. */
{
int toRead; /* How much to read? */
int result; /* Of calling driver. */
int nread; /* How much was read from channel? */
ChannelBuffer *bufPtr; /* New buffer to add to input queue. */
/*
* Prevent reading from a dead channel -- a channel that has been closed
* but not yet deallocated, which can happen if the exit handler for
* channel cleanup has run but the channel is still registered in some
* interpreter.
*/
if (chanPtr->flags & CHANNEL_DEAD) {
Tcl_SetErrno(EINVAL);
return -1;
}
/*
* See if we can fill an existing buffer. If we can, read only
* as much as will fit in it. Otherwise allocate a new buffer,
* add it to the input queue and attempt to fill it to the max.
*/
if ((chanPtr->inQueueTail != (ChannelBuffer *) NULL) &&
(chanPtr->inQueueTail->nextAdded < chanPtr->inQueueTail->bufSize)) {
bufPtr = chanPtr->inQueueTail;
toRead = bufPtr->bufSize - bufPtr->nextAdded;
} else {
if (chanPtr->saveInBufPtr != (ChannelBuffer *) NULL) {
bufPtr = chanPtr->saveInBufPtr;
chanPtr->saveInBufPtr = (ChannelBuffer *) NULL;
} else {
bufPtr = (ChannelBuffer *) ckalloc(
((unsigned) CHANNELBUFFER_HEADER_SIZE + chanPtr->bufSize));
bufPtr->bufSize = chanPtr->bufSize;
}
bufPtr->nextRemoved = 0;
bufPtr->nextAdded = 0;
toRead = bufPtr->bufSize;
if (chanPtr->inQueueTail == (ChannelBuffer *) NULL) {
chanPtr->inQueueHead = bufPtr;
} else {
chanPtr->inQueueTail->nextPtr = bufPtr;
}
chanPtr->inQueueTail = bufPtr;
bufPtr->nextPtr = (ChannelBuffer *) NULL;
}
while (1) {
/*
* If EOF is set, we should avoid calling the driver because on some
* platforms it is impossible to read from a device after EOF.
*/
if (chanPtr->flags & CHANNEL_EOF) {
break;
}
nread = (chanPtr->typePtr->inputProc) (chanPtr->instanceData,
bufPtr->buf + bufPtr->nextAdded, toRead, &result);
if (nread == 0) {
chanPtr->flags |= CHANNEL_EOF;
break;
} else if (nread < 0) {
if ((result == EWOULDBLOCK) || (result == EAGAIN)) {
chanPtr->flags |= CHANNEL_BLOCKED;
result = EAGAIN;
if (chanPtr->flags & CHANNEL_NONBLOCKING) {
Tcl_SetErrno(result);
return result;
} else {
/*
* If the device driver did not emulate blocking behavior
* then we have to do it here.
*/
WaitForChannel(chanPtr, TCL_READABLE, -1);
}
} else {
Tcl_SetErrno(result);
return result;
}
} else {
bufPtr->nextAdded += nread;
/*
* If we get a short read, signal up that we may be BLOCKED. We
* should avoid calling the driver because on some platforms we
* will block in the low level reading code even though the
* channel is set into nonblocking mode.
*/
if (nread < toRead) {
chanPtr->flags |= CHANNEL_BLOCKED;
}
break;
}
}
return 0;
}
/*
*----------------------------------------------------------------------
*
* CopyAndTranslateBuffer --
*
* Copy at most one buffer of input to the result space, doing
* eol translations according to mode in effect currently.
*
* Results:
* Number of characters (as opposed to bytes) copied. May return
* zero if no input is available to be translated.
*
* Side effects:
* Consumes buffered input. May deallocate one buffer.
*
*----------------------------------------------------------------------
*/
static int
CopyAndTranslateBuffer(chanPtr, result, space)
Channel *chanPtr; /* The channel from which to read input. */
char *result; /* Where to store the copied input. */
int space; /* How many bytes are available in result
* to store the copied input? */
{
int bytesInBuffer; /* How many bytes are available to be
* copied in the current input buffer? */
int copied; /* How many characters were already copied
* into the destination space? */
ChannelBuffer *bufPtr; /* The buffer from which to copy bytes. */
char curByte; /* The byte we are currently translating. */
int i; /* Iterates over the copied input looking
* for the input eofChar. */
/*
* If there is no input at all, return zero. The invariant is that either
* there is no buffer in the queue, or if the first buffer is empty, it
* is also the last buffer (and thus there is no input in the queue).
* Note also that if the buffer is empty, we leave it in the queue.
*/
if (chanPtr->inQueueHead == (ChannelBuffer *) NULL) {
return 0;
}
bufPtr = chanPtr->inQueueHead;
bytesInBuffer = bufPtr->nextAdded - bufPtr->nextRemoved;
if (bytesInBuffer < space) {
space = bytesInBuffer;
}
copied = 0;
switch (chanPtr->inputTranslation) {
case TCL_TRANSLATE_LF:
if (space == 0) {
return 0;
}
/*
* Copy the current chunk into the result buffer.
*/
memcpy((VOID *) result,
(VOID *)(bufPtr->buf + bufPtr->nextRemoved),
(size_t) space);
bufPtr->nextRemoved += space;
copied = space;
break;
case TCL_TRANSLATE_CR:
if (space == 0) {
return 0;
}
/*
* Copy the current chunk into the result buffer, then
* replace all \r with \n.
*/
memcpy((VOID *) result,
(VOID *)(bufPtr->buf + bufPtr->nextRemoved),
(size_t) space);
bufPtr->nextRemoved += space;
for (copied = 0; copied < space; copied++) {
if (result[copied] == '\r') {
result[copied] = '\n';
}
}
break;
case TCL_TRANSLATE_CRLF:
/*
* If there is a held-back "\r" at EOF, produce it now.
*/
if (space == 0) {
if ((chanPtr->flags & (INPUT_SAW_CR | CHANNEL_EOF)) ==
(INPUT_SAW_CR | CHANNEL_EOF)) {
result[0] = '\r';
chanPtr->flags &= (~(INPUT_SAW_CR));
return 1;
}
return 0;
}
/*
* Copy the current chunk and replace "\r\n" with "\n"
* (but not standalone "\r"!).
*/
for (copied = 0;
(copied < space) &&
(bufPtr->nextRemoved < bufPtr->nextAdded);
copied++) {
curByte = bufPtr->buf[bufPtr->nextRemoved];
bufPtr->nextRemoved++;
if (curByte == '\r') {
if (chanPtr->flags & INPUT_SAW_CR) {
result[copied] = '\r';
} else {
chanPtr->flags |= INPUT_SAW_CR;
copied--;
}
} else if (curByte == '\n') {
chanPtr->flags &= (~(INPUT_SAW_CR));
result[copied] = '\n';
} else {
if (chanPtr->flags & INPUT_SAW_CR) {
chanPtr->flags &= (~(INPUT_SAW_CR));
result[copied] = '\r';
copied++;
}
result[copied] = curByte;
}
}
break;
case TCL_TRANSLATE_AUTO:
if (space == 0) {
return 0;
}
/*
* Loop over the current buffer, converting "\r" and "\r\n"
* to "\n".
*/
for (copied = 0;
(copied < space) &&
(bufPtr->nextRemoved < bufPtr->nextAdded); ) {
curByte = bufPtr->buf[bufPtr->nextRemoved];
bufPtr->nextRemoved++;
if (curByte == '\r') {
result[copied] = '\n';
copied++;
if (bufPtr->nextRemoved < bufPtr->nextAdded) {
if (bufPtr->buf[bufPtr->nextRemoved] == '\n') {
bufPtr->nextRemoved++;
}
chanPtr->flags &= (~(INPUT_SAW_CR));
} else {
chanPtr->flags |= INPUT_SAW_CR;
}
} else {
if (curByte == '\n') {
if (!(chanPtr->flags & INPUT_SAW_CR)) {
result[copied] = '\n';
copied++;
}
} else {
result[copied] = curByte;
copied++;
}
chanPtr->flags &= (~(INPUT_SAW_CR));
}
}
break;
default:
panic("unknown eol translation mode");
}
/*
* If an in-stream EOF character is set for this channel,, check that
* the input we copied so far does not contain the EOF char. If it does,
* copy only up to and excluding that character.
*/
if (chanPtr->inEofChar != 0) {
for (i = 0; i < copied; i++) {
if (result[i] == (char) chanPtr->inEofChar) {
break;
}
}
if (i < copied) {
/*
* Set sticky EOF so that no further input is presented
* to the caller.
*/
chanPtr->flags |= (CHANNEL_EOF | CHANNEL_STICKY_EOF);
/*
* Reset the start of valid data in the input buffer to the
* position of the eofChar, so that subsequent reads will
* encounter it immediately. First we set it to the position
* of the last byte consumed if all result bytes were the
* product of one input byte; since it is possible that "\r\n"
* contracted to "\n" in the result, we have to search back
* from that position until we find the eofChar, because it
* is possible that its actual position in the buffer is n
* bytes further back (n is the number of "\r\n" sequences
* that were contracted to "\n" in the result).
*/
bufPtr->nextRemoved -= (copied - i);
while ((bufPtr->nextRemoved > 0) &&
(bufPtr->buf[bufPtr->nextRemoved] !=
(char) chanPtr->inEofChar)) {
bufPtr->nextRemoved--;
}
copied = i;
}
}
/*
* If the current buffer is empty recycle it.
*/
if (bufPtr->nextRemoved == bufPtr->nextAdded) {
chanPtr->inQueueHead = bufPtr->nextPtr;
if (chanPtr->inQueueHead == (ChannelBuffer *) NULL) {
chanPtr->inQueueTail = (ChannelBuffer *) NULL;
}
RecycleBuffer(chanPtr, bufPtr, 0);
}
/*
* Return the number of characters copied into the result buffer.
* This may be different from the number of bytes consumed, because
* of EOL translations.
*/
return copied;
}
/*
*----------------------------------------------------------------------
*
* ScanBufferForEOL --
*
* Scans one buffer for EOL according to the specified EOL
* translation mode. If it sees the input eofChar for the channel
* it stops also.
*
* Results:
* TRUE if EOL is found, FALSE otherwise. Also sets output parameter
* bytesToEOLPtr to the number of bytes so far to EOL, and crSeenPtr
* to whether a "\r" was seen.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
static int
ScanBufferForEOL(chanPtr, bufPtr, translation, eofChar, bytesToEOLPtr,
crSeenPtr)
Channel *chanPtr;
ChannelBuffer *bufPtr; /* Buffer to scan for EOL. */
Tcl_EolTranslation translation; /* Translation mode to use. */
int eofChar; /* EOF char to look for. */
int *bytesToEOLPtr; /* Running counter. */
int *crSeenPtr; /* Has "\r" been seen? */
{
char *rPtr; /* Iterates over input string. */
char *sPtr; /* Where to stop search? */
int EOLFound;
int bytesToEOL;
for (EOLFound = 0, rPtr = bufPtr->buf + bufPtr->nextRemoved,
sPtr = bufPtr->buf + bufPtr->nextAdded,
bytesToEOL = *bytesToEOLPtr;
(!EOLFound) && (rPtr < sPtr);
rPtr++) {
switch (translation) {
case TCL_TRANSLATE_AUTO:
if ((*rPtr == (char) eofChar) && (eofChar != 0)) {
chanPtr->flags |= (CHANNEL_EOF | CHANNEL_STICKY_EOF);
EOLFound = 1;
} else if (*rPtr == '\n') {
/*
* CopyAndTranslateBuffer wants to know the length
* of the result, not the input. The input is one
* larger because "\r\n" shrinks to "\n".
*/
if (!(*crSeenPtr)) {
bytesToEOL++;
EOLFound = 1;
} else {
/*
* This is a lf at the begining of a buffer
* where the previous buffer ended in a cr.
* Consume this lf because we've already emitted
* the newline for this crlf sequence. ALSO, if
* bytesToEOL is 0 (which means that we are at the
* first character of the scan), unset the
* INPUT_SAW_CR flag in the channel, because we
* already handled it; leaving it set would cause
* CopyAndTranslateBuffer to potentially consume
* another lf if one follows the current byte.
*/
bufPtr->nextRemoved++;
*crSeenPtr = 0;
chanPtr->flags &= (~(INPUT_SAW_CR));
}
} else if (*rPtr == '\r') {
bytesToEOL++;
EOLFound = 1;
} else {
*crSeenPtr = 0;
bytesToEOL++;
}
break;
case TCL_TRANSLATE_LF:
if ((*rPtr == (char) eofChar) && (eofChar != 0)) {
chanPtr->flags |= (CHANNEL_EOF | CHANNEL_STICKY_EOF);
EOLFound = 1;
} else {
if (*rPtr == '\n') {
EOLFound = 1;
}
bytesToEOL++;
}
break;
case TCL_TRANSLATE_CR:
if ((*rPtr == (char) eofChar) && (eofChar != 0)) {
chanPtr->flags |= (CHANNEL_EOF | CHANNEL_STICKY_EOF);
EOLFound = 1;
} else {
if (*rPtr == '\r') {
EOLFound = 1;
}
bytesToEOL++;
}
break;
case TCL_TRANSLATE_CRLF:
if ((*rPtr == (char) eofChar) && (eofChar != 0)) {
chanPtr->flags |= (CHANNEL_EOF | CHANNEL_STICKY_EOF);
EOLFound = 1;
} else if (*rPtr == '\n') {
/*
* CopyAndTranslateBuffer wants to know the length
* of the result, not the input. The input is one
* larger because crlf shrinks to lf.
*/
if (*crSeenPtr) {
EOLFound = 1;
} else {
bytesToEOL++;
}
} else {
if (*rPtr == '\r') {
*crSeenPtr = 1;
} else {
*crSeenPtr = 0;
}
bytesToEOL++;
}
break;
default:
panic("unknown eol translation mode");
}
}
*bytesToEOLPtr = bytesToEOL;
return EOLFound;
}
/*
*----------------------------------------------------------------------
*
* ScanInputForEOL --
*
* Scans queued input for chanPtr for an end of line (according to the
* current EOL translation mode) and returns the number of bytes
* upto and including the end of line, or -1 if none was found.
*
* Results:
* Count of bytes upto and including the end of line if one is present
* or -1 if none was found. Also returns in an output parameter the
* number of bytes queued if no end of line was found.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
static int
ScanInputForEOL(chanPtr, bytesQueuedPtr)
Channel *chanPtr; /* Channel for which to scan queued
* input for end of line. */
int *bytesQueuedPtr; /* Where to store the number of bytes
* currently queued if no end of line
* was found. */
{
ChannelBuffer *bufPtr; /* Iterates over queued buffers. */
int bytesToEOL; /* How many bytes to end of line? */
int EOLFound; /* Did we find an end of line? */
int crSeen; /* Did we see a "\r" in CRLF mode? */
*bytesQueuedPtr = 0;
bytesToEOL = 0;
EOLFound = 0;
for (bufPtr = chanPtr->inQueueHead,
crSeen = (chanPtr->flags & INPUT_SAW_CR) ? 1 : 0;
(!EOLFound) && (bufPtr != (ChannelBuffer *) NULL);
bufPtr = bufPtr->nextPtr) {
EOLFound = ScanBufferForEOL(chanPtr, bufPtr, chanPtr->inputTranslation,
chanPtr->inEofChar, &bytesToEOL, &crSeen);
}
if (EOLFound == 0) {
*bytesQueuedPtr = bytesToEOL;
return -1;
}
return bytesToEOL;
}
/*
*----------------------------------------------------------------------
*
* GetEOL --
*
* Accumulate input into the channel input buffer queue until an
* end of line has been seen.
*
* Results:
* Number of bytes buffered or -1 on failure.
*
* Side effects:
* Consumes input from the channel.
*
*----------------------------------------------------------------------
*/
static int
GetEOL(chanPtr)
Channel *chanPtr; /* Channel to queue input on. */
{
int result; /* Of getting another buffer from the
* channel. */
int bytesToEOL; /* How many bytes in buffer up to and
* including the end of line? */
int bytesQueued; /* How many bytes are queued currently
* in the input chain of the channel? */
while (1) {
bytesToEOL = ScanInputForEOL(chanPtr, &bytesQueued);
if (bytesToEOL > 0) {
chanPtr->flags &= (~(CHANNEL_BLOCKED));
return bytesToEOL;
}
if (chanPtr->flags & CHANNEL_EOF) {
/*
* Boundary case where cr was at the end of the previous buffer
* and this buffer just has a newline. At EOF our caller wants
* to see -1 for the line length.
*/
return (bytesQueued == 0) ? -1 : bytesQueued ;
}
if (chanPtr->flags & CHANNEL_BLOCKED) {
if (chanPtr->flags & CHANNEL_NONBLOCKING) {
return -1;
}
chanPtr->flags &= (~(CHANNEL_BLOCKED));
}
result = GetInput(chanPtr);
if (result != 0) {
if (result == EAGAIN) {
chanPtr->flags |= CHANNEL_BLOCKED;
}
return -1;
}
}
}
/*
*----------------------------------------------------------------------
*
* Tcl_Read --
*
* Reads a given number of characters from a channel.
*
* Results:
* The number of characters read, or -1 on error. Use Tcl_GetErrno()
* to retrieve the error code for the error that occurred.
*
* Side effects:
* May cause input to be buffered.
*
*----------------------------------------------------------------------
*/
int
Tcl_Read(chan, bufPtr, toRead)
Tcl_Channel chan; /* The channel from which to read. */
char *bufPtr; /* Where to store input read. */
int toRead; /* Maximum number of characters to read. */
{
Channel *chanPtr; /* The real IO channel. */
int copied; /* How many characters were copied into
* the result string? */
int copiedNow; /* How many characters were copied from
* the current input buffer? */
int result; /* Of calling GetInput. */
chanPtr = (Channel *) chan;
/*
* Check for unreported error.
*/
if (chanPtr->unreportedError != 0) {
Tcl_SetErrno(chanPtr->unreportedError);
chanPtr->unreportedError = 0;
return -1;
}
/*
* Punt if the channel is not opened for reading.
*/
if (!(chanPtr->flags & TCL_READABLE)) {
Tcl_SetErrno(EACCES);
return -1;
}
/*
* If we have not encountered a sticky EOF, clear the EOF bit. Either
* way clear the BLOCKED bit. We want to discover these anew during
* each operation.
*/
if (!(chanPtr->flags & CHANNEL_STICKY_EOF)) {
chanPtr->flags &= (~(CHANNEL_EOF));
}
chanPtr->flags &= (~(CHANNEL_BLOCKED));
for (copied = 0; copied < toRead; copied += copiedNow) {
copiedNow = CopyAndTranslateBuffer(chanPtr, bufPtr + copied,
toRead - copied);
if (copiedNow == 0) {
if (chanPtr->flags & CHANNEL_EOF) {
return copied;
}
if (chanPtr->flags & CHANNEL_BLOCKED) {
if (chanPtr->flags & CHANNEL_NONBLOCKING) {
return copied;
}
chanPtr->flags &= (~(CHANNEL_BLOCKED));
}
result = GetInput(chanPtr);
if (result != 0) {
if (result == EAGAIN) {
return copied;
}
return -1;
}
}
}
chanPtr->flags &= (~(CHANNEL_BLOCKED));
return copied;
}
/*
*----------------------------------------------------------------------
*
* Tcl_Gets --
*
* Reads a complete line of input from the channel.
*
* Results:
* Length of line read or -1 if error, EOF or blocked. If -1, use
* Tcl_GetErrno() to retrieve the POSIX error code for the
* error or condition that occurred.
*
* Side effects:
* May flush output on the channel. May cause input to be
* consumed from the channel.
*
*----------------------------------------------------------------------
*/
int
Tcl_Gets(chan, lineRead)
Tcl_Channel chan; /* Channel from which to read. */
Tcl_DString *lineRead; /* The characters of the line read
* (excluding the terminating newline if
* present) will be appended to this
* DString. The caller must have initialized
* it and is responsible for managing the
* storage. */
{
Channel *chanPtr; /* The channel to read from. */
char *buf; /* Points into DString where data
* will be stored. */
int offset; /* Offset from start of DString at
* which to append the line just read. */
int copiedTotal; /* Accumulates total length of input copied. */
int copiedNow; /* How many bytes were copied from the
* current input buffer? */
int lineLen; /* Length of line read, including the
* translated newline. If this is zero
* and neither EOF nor BLOCKED is set,
* the current line is empty. */
chanPtr = (Channel *) chan;
/*
* Check for unreported error.
*/
if (chanPtr->unreportedError != 0) {
Tcl_SetErrno(chanPtr->unreportedError);
chanPtr->unreportedError = 0;
return -1;
}
/*
* Punt if the channel is not opened for reading.
*/
if (!(chanPtr->flags & TCL_READABLE)) {
Tcl_SetErrno(EACCES);
return -1;
}
/*
* If we have not encountered a sticky EOF, clear the EOF bit
* (sticky EOF is set if we have seen the input eofChar, to prevent
* reading beyond the eofChar). Also, always clear the BLOCKED bit.
* We want to discover these conditions anew in each operation.
*/
if (!(chanPtr->flags & CHANNEL_STICKY_EOF)) {
chanPtr->flags &= (~(CHANNEL_EOF));
}
chanPtr->flags &= (~(CHANNEL_BLOCKED));
lineLen = GetEOL(chanPtr);
if (lineLen < 0) {
return -1;
}
if (lineLen == 0) {
if (chanPtr->flags & (CHANNEL_EOF | CHANNEL_BLOCKED)) {
return -1;
}
return 0;
}
offset = Tcl_DStringLength(lineRead);
Tcl_DStringSetLength(lineRead, lineLen + offset);
buf = Tcl_DStringValue(lineRead) + offset;
for (copiedTotal = 0; copiedTotal < lineLen; copiedTotal += copiedNow) {
copiedNow = CopyAndTranslateBuffer(chanPtr, buf + copiedTotal,
lineLen - copiedTotal);
}
if ((copiedTotal > 0) && (buf[copiedTotal - 1] == '\n')) {
copiedTotal--;
}
Tcl_DStringSetLength(lineRead, copiedTotal + offset);
return copiedTotal;
}
/*
*----------------------------------------------------------------------
*
* Tcl_Seek --
*
* Implements seeking on Tcl Channels. This is a public function
* so that other C facilities may be implemented on top of it.
*
* Results:
* The new access point or -1 on error. If error, use Tcl_GetErrno()
* to retrieve the POSIX error code for the error that occurred.
*
* Side effects:
* May flush output on the channel. May discard queued input.
*
*----------------------------------------------------------------------
*/
int
Tcl_Seek(chan, offset, mode)
Tcl_Channel chan; /* The channel on which to seek. */
int offset; /* Offset to seek to. */
int mode; /* Relative to which location to seek? */
{
Channel *chanPtr; /* The real IO channel. */
ChannelBuffer *bufPtr; /* Iterates over queued input
* and output buffers. */
int inputBuffered, outputBuffered;
int result; /* Of device driver operations. */
int curPos; /* Position on the device. */
int wasAsync; /* Was the channel nonblocking before the
* seek operation? If so, must restore to
* nonblocking mode after the seek. */
Tcl_File outFile; /* Used to cancel async flushes for
* this channel. */
chanPtr = (Channel *) chan;
/*
* Check for unreported error.
*/
if (chanPtr->unreportedError != 0) {
Tcl_SetErrno(chanPtr->unreportedError);
chanPtr->unreportedError = 0;
return -1;
}
/*
* Disallow seek on channels that are open for neither writing nor
* reading (e.g. socket server channels).
*/
if (!(chanPtr->flags & (TCL_WRITABLE|TCL_READABLE))) {
Tcl_SetErrno(EACCES);
return -1;
}
/*
* Disallow seek on dead channels -- channels that have been closed but
* not yet been deallocated. Such channels can be found if the exit
* handler for channel cleanup has run but the channel is still
* registered in an interpreter.
*/
if (chanPtr->flags & CHANNEL_DEAD) {
Tcl_SetErrno(EINVAL);
return -1;
}
/*
* Disallow seek on channels whose type does not have a seek procedure
* defined. This means that the channel does not support seeking.
*/
if (chanPtr->typePtr->seekProc == (Tcl_DriverSeekProc *) NULL) {
Tcl_SetErrno(EINVAL);
return -1;
}
/*
* Compute how much input and output is buffered. If both input and
* output is buffered, cannot compute the current position.
*/
for (bufPtr = chanPtr->inQueueHead, inputBuffered = 0;
bufPtr != (ChannelBuffer *) NULL;
bufPtr = bufPtr->nextPtr) {
inputBuffered += (bufPtr->nextAdded - bufPtr->nextRemoved);
}
for (bufPtr = chanPtr->outQueueHead, outputBuffered = 0;
bufPtr != (ChannelBuffer *) NULL;
bufPtr = bufPtr->nextPtr) {
outputBuffered += (bufPtr->nextAdded - bufPtr->nextRemoved);
}
if ((chanPtr->curOutPtr != (ChannelBuffer *) NULL) &&
(chanPtr->curOutPtr->nextAdded > chanPtr->curOutPtr->nextRemoved)) {
chanPtr->flags |= BUFFER_READY;
outputBuffered +=
(chanPtr->curOutPtr->nextAdded - chanPtr->curOutPtr->nextRemoved);
}
if ((inputBuffered != 0) && (outputBuffered != 0)) {
Tcl_SetErrno(EFAULT);
return -1;
}
/*
* If we are seeking relative to the current position, compute the
* corrected offset taking into account the amount of unread input.
*/
if (mode == SEEK_CUR) {
offset -= inputBuffered;
}
/*
* Discard any queued input - this input should not be read after
* the seek.
*/
DiscardInputQueued(chanPtr, 0);
/*
* Reset EOF and BLOCKED flags. We invalidate them by moving the
* access point. Also clear CR related flags.
*/
chanPtr->flags &=
(~(CHANNEL_EOF | CHANNEL_STICKY_EOF | CHANNEL_BLOCKED | INPUT_SAW_CR));
/*
* If the channel is in asynchronous output mode, switch it back
* to synchronous mode and cancel any async flush that may be
* scheduled. After the flush, the channel will be put back into
* asynchronous output mode.
*/
wasAsync = 0;
if (chanPtr->flags & CHANNEL_NONBLOCKING) {
wasAsync = 1;
result = 0;
if (chanPtr->typePtr->blockModeProc != NULL) {
result = (chanPtr->typePtr->blockModeProc) (chanPtr->instanceData,
TCL_MODE_BLOCKING);
}
if (result != 0) {
Tcl_SetErrno(result);
return -1;
}
chanPtr->flags &= (~(CHANNEL_NONBLOCKING));
if (chanPtr->flags & BG_FLUSH_SCHEDULED) {
chanPtr->flags &= (~(BG_FLUSH_SCHEDULED));
outFile = Tcl_GetChannelFile((Tcl_Channel) chanPtr, TCL_WRITABLE);
if (outFile != (Tcl_File) NULL) {
Tcl_DeleteFileHandler(outFile);
}
}
}
/*
* If the flush fails we cannot recover the original position. In
* that case the seek is not attempted because we do not know where
* the access position is - instead we return the error. FlushChannel
* has already called Tcl_SetErrno() to report the error upwards.
* If the flush succeeds we do the seek also.
*/
if (FlushChannel(NULL, chanPtr, 0) != 0) {
curPos = -1;
} else {
/*
* Now seek to the new position in the channel as requested by the
* caller.
*/
curPos = (chanPtr->typePtr->seekProc) (chanPtr->instanceData,
(long) offset, mode, &result);
if (curPos == -1) {
Tcl_SetErrno(result);
}
}
/*
* Restore to nonblocking mode if that was the previous behavior.
*
* NOTE: Even if there was an async flush active we do not restore
* it now because we already flushed all the queued output, above.
*/
if (wasAsync) {
chanPtr->flags |= CHANNEL_NONBLOCKING;
result = 0;
if (chanPtr->typePtr->blockModeProc != NULL) {
result = (chanPtr->typePtr->blockModeProc) (chanPtr->instanceData,
TCL_MODE_NONBLOCKING);
}
if (result != 0) {
Tcl_SetErrno(result);
return -1;
}
}
return curPos;
}
/*
*----------------------------------------------------------------------
*
* Tcl_Tell --
*
* Returns the position of the next character to be read/written on
* this channel.
*
* Results:
* A nonnegative integer on success, -1 on failure. If failed,
* use Tcl_GetErrno() to retrieve the POSIX error code for the
* error that occurred.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
int
Tcl_Tell(chan)
Tcl_Channel chan; /* The channel to return pos for. */
{
Channel *chanPtr; /* The actual channel to tell on. */
ChannelBuffer *bufPtr; /* Iterates over queued input
* and output buffers. */
int inputBuffered, outputBuffered;
int result; /* Of calling device driver. */
int curPos; /* Position on device. */
chanPtr = (Channel *) chan;
/*
* Check for unreported error.
*/
if (chanPtr->unreportedError != 0) {
Tcl_SetErrno(chanPtr->unreportedError);
chanPtr->unreportedError = 0;
return -1;
}
/*
* Disallow tell on dead channels -- channels that have been closed but
* not yet been deallocated. Such channels can be found if the exit
* handler for channel cleanup has run but the channel is still
* registered in an interpreter.
*/
if (chanPtr->flags & CHANNEL_DEAD) {
Tcl_SetErrno(EINVAL);
return -1;
}
/*
* Disallow tell on channels that are open for neither
* writing nor reading (e.g. socket server channels).
*/
if (!(chanPtr->flags & (TCL_WRITABLE|TCL_READABLE))) {
Tcl_SetErrno(EACCES);
return -1;
}
/*
* Disallow tell on channels whose type does not have a seek procedure
* defined. This means that the channel does not support seeking.
*/
if (chanPtr->typePtr->seekProc == (Tcl_DriverSeekProc *) NULL) {
Tcl_SetErrno(EINVAL);
return -1;
}
/*
* Compute how much input and output is buffered. If both input and
* output is buffered, cannot compute the current position.
*/
for (bufPtr = chanPtr->inQueueHead, inputBuffered = 0;
bufPtr != (ChannelBuffer *) NULL;
bufPtr = bufPtr->nextPtr) {
inputBuffered += (bufPtr->nextAdded - bufPtr->nextRemoved);
}
for (bufPtr = chanPtr->outQueueHead, outputBuffered = 0;
bufPtr != (ChannelBuffer *) NULL;
bufPtr = bufPtr->nextPtr) {
outputBuffered += (bufPtr->nextAdded - bufPtr->nextRemoved);
}
if (chanPtr->curOutPtr != (ChannelBuffer *) NULL) {
outputBuffered +=
(chanPtr->curOutPtr->nextAdded - chanPtr->curOutPtr->nextRemoved);
}
if ((inputBuffered != 0) && (outputBuffered != 0)) {
Tcl_SetErrno(EFAULT);
return -1;
}
/*
* Get the current position in the device and compute the position
* where the next character will be read or written.
*/
curPos = (chanPtr->typePtr->seekProc) (chanPtr->instanceData,
(long) 0, SEEK_CUR, &result);
if (curPos == -1) {
Tcl_SetErrno(result);
return -1;
}
if (inputBuffered != 0) {
return (curPos - inputBuffered);
}
return (curPos + outputBuffered);
}
/*
*----------------------------------------------------------------------
*
* Tcl_Eof --
*
* Returns 1 if the channel is at EOF, 0 otherwise.
*
* Results:
* 1 or 0, always.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
int
Tcl_Eof(chan)
Tcl_Channel chan; /* Does this channel have EOF? */
{
Channel *chanPtr; /* The real channel structure. */
chanPtr = (Channel *) chan;
return ((chanPtr->flags & CHANNEL_STICKY_EOF) ||
((chanPtr->flags & CHANNEL_EOF) && (Tcl_InputBuffered(chan) == 0)))
? 1 : 0;
}
/*
*----------------------------------------------------------------------
*
* Tcl_InputBlocked --
*
* Returns 1 if input is blocked on this channel, 0 otherwise.
*
* Results:
* 0 or 1, always.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
int
Tcl_InputBlocked(chan)
Tcl_Channel chan; /* Is this channel blocked? */
{
Channel *chanPtr; /* The real channel structure. */
chanPtr = (Channel *) chan;
return (chanPtr->flags & CHANNEL_BLOCKED) ? 1 : 0;
}
/*
*----------------------------------------------------------------------
*
* Tcl_InputBuffered --
*
* Returns the number of bytes of input currently buffered in the
* internal buffer of a channel.
*
* Results:
* The number of input bytes buffered, or zero if the channel is not
* open for reading.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
int
Tcl_InputBuffered(chan)
Tcl_Channel chan; /* The channel to query. */
{
Channel *chanPtr;
int bytesBuffered;
ChannelBuffer *bufPtr;
chanPtr = (Channel *) chan;
for (bytesBuffered = 0, bufPtr = chanPtr->inQueueHead;
bufPtr != (ChannelBuffer *) NULL;
bufPtr = bufPtr->nextPtr) {
bytesBuffered += (bufPtr->nextAdded - bufPtr->nextRemoved);
}
return bytesBuffered;
}
/*
*----------------------------------------------------------------------
*
* Tcl_SetChannelBufferSize --
*
* Sets the size of buffers to allocate to store input or output
* in the channel. The size must be between 10 bytes and 1 MByte.
*
* Results:
* None.
*
* Side effects:
* Sets the size of buffers subsequently allocated for this channel.
*
*----------------------------------------------------------------------
*/
void
Tcl_SetChannelBufferSize(chan, sz)
Tcl_Channel chan; /* The channel whose buffer size
* to set. */
int sz; /* The size to set. */
{
Channel *chanPtr;
if (sz < 10) {
sz = CHANNELBUFFER_DEFAULT_SIZE;
}
/*
* Allow only buffers that are smaller than one megabyte.
*/
if (sz > (1024 * 1024)) {
sz = CHANNELBUFFER_DEFAULT_SIZE;
}
chanPtr = (Channel *) chan;
chanPtr->bufSize = sz;
}
/*
*----------------------------------------------------------------------
*
* Tcl_GetChannelBufferSize --
*
* Retrieves the size of buffers to allocate for this channel.
*
* Results:
* The size.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
int
Tcl_GetChannelBufferSize(chan)
Tcl_Channel chan; /* The channel for which to find the
* buffer size. */
{
Channel *chanPtr;
chanPtr = (Channel *) chan;
return chanPtr->bufSize;
}
/*
*----------------------------------------------------------------------
*
* Tcl_GetChannelOption --
*
* Gets a mode associated with an IO channel. If the optionName arg
* is non NULL, retrieves the value of that option. If the optionName
* arg is NULL, retrieves a list of alternating option names and
* values for the given channel.
*
* Results:
* A standard Tcl result. Also sets the supplied DString to the
* string value of the option(s) returned.
*
* Side effects:
* The string returned by this function is in static storage and
* may be reused at any time subsequent to the call.
*
*----------------------------------------------------------------------
*/
int
Tcl_GetChannelOption(chan, optionName, dsPtr)
Tcl_Channel chan; /* Channel on which to get option. */
char *optionName; /* Option to get. */
Tcl_DString *dsPtr; /* Where to store value(s). */
{
Channel *chanPtr; /* The real IO channel. */
size_t len; /* Length of optionName string. */
char optionVal[128]; /* Buffer for sprintf. */
chanPtr = (Channel *) chan;
/*
* Disallow options on dead channels -- channels that have been closed but
* not yet been deallocated. Such channels can be found if the exit
* handler for channel cleanup has run but the channel is still
* registered in an interpreter.
*/
if (chanPtr->flags & CHANNEL_DEAD) {
Tcl_SetErrno(EINVAL);
return TCL_ERROR;
}
/*
* If the optionName is NULL it means that we want a list of all
* options and values.
*/
if (optionName == (char *) NULL) {
len = 0;
} else {
len = strlen(optionName);
}
if ((len == 0) || ((len > 2) && (optionName[1] == 'b') &&
(strncmp(optionName, "-blocking", len) == 0))) {
if (len == 0) {
Tcl_DStringAppendElement(dsPtr, "-blocking");
}
Tcl_DStringAppendElement(dsPtr,
(chanPtr->flags & CHANNEL_NONBLOCKING) ? "0" : "1");
if (len > 0) {
return TCL_OK;
}
}
if ((len == 0) || ((len > 7) && (optionName[1] == 'b') &&
(strncmp(optionName, "-buffering", len) == 0))) {
if (len == 0) {
Tcl_DStringAppendElement(dsPtr, "-buffering");
}
if (chanPtr->flags & CHANNEL_LINEBUFFERED) {
Tcl_DStringAppendElement(dsPtr, "line");
} else if (chanPtr->flags & CHANNEL_UNBUFFERED) {
Tcl_DStringAppendElement(dsPtr, "none");
} else {
Tcl_DStringAppendElement(dsPtr, "full");
}
if (len > 0) {
return TCL_OK;
}
}
if ((len == 0) || ((len > 7) && (optionName[1] == 'b') &&
(strncmp(optionName, "-buffersize", len) == 0))) {
if (len == 0) {
Tcl_DStringAppendElement(dsPtr, "-buffersize");
}
sprintf(optionVal, "%d", chanPtr->bufSize);
Tcl_DStringAppendElement(dsPtr, optionVal);
if (len > 0) {
return TCL_OK;
}
}
if ((len == 0) ||
((len > 1) && (optionName[1] == 'e') &&
(strncmp(optionName, "-eofchar", len) == 0))) {
if (len == 0) {
Tcl_DStringAppendElement(dsPtr, "-eofchar");
}
if (((chanPtr->flags & (TCL_READABLE|TCL_WRITABLE)) ==
(TCL_READABLE|TCL_WRITABLE)) && (len == 0)) {
Tcl_DStringStartSublist(dsPtr);
}
if (chanPtr->flags & TCL_READABLE) {
if (chanPtr->inEofChar == 0) {
Tcl_DStringAppendElement(dsPtr, "");
} else {
char buf[4];
sprintf(buf, "%c", chanPtr->inEofChar);
Tcl_DStringAppendElement(dsPtr, buf);
}
}
if (chanPtr->flags & TCL_WRITABLE) {
if (chanPtr->outEofChar == 0) {
Tcl_DStringAppendElement(dsPtr, "");
} else {
char buf[4];
sprintf(buf, "%c", chanPtr->outEofChar);
Tcl_DStringAppendElement(dsPtr, buf);
}
}
if (((chanPtr->flags & (TCL_READABLE|TCL_WRITABLE)) ==
(TCL_READABLE|TCL_WRITABLE)) && (len == 0)) {
Tcl_DStringEndSublist(dsPtr);
}
if (len > 0) {
return TCL_OK;
}
}
if ((len == 0) ||
((len > 1) && (optionName[1] == 't') &&
(strncmp(optionName, "-translation", len) == 0))) {
if (len == 0) {
Tcl_DStringAppendElement(dsPtr, "-translation");
}
if (((chanPtr->flags & (TCL_READABLE|TCL_WRITABLE)) ==
(TCL_READABLE|TCL_WRITABLE)) && (len == 0)) {
Tcl_DStringStartSublist(dsPtr);
}
if (chanPtr->flags & TCL_READABLE) {
if (chanPtr->inputTranslation == TCL_TRANSLATE_AUTO) {
Tcl_DStringAppendElement(dsPtr, "auto");
} else if (chanPtr->inputTranslation == TCL_TRANSLATE_CR) {
Tcl_DStringAppendElement(dsPtr, "cr");
} else if (chanPtr->inputTranslation == TCL_TRANSLATE_CRLF) {
Tcl_DStringAppendElement(dsPtr, "crlf");
} else {
Tcl_DStringAppendElement(dsPtr, "lf");
}
}
if (chanPtr->flags & TCL_WRITABLE) {
if (chanPtr->outputTranslation == TCL_TRANSLATE_AUTO) {
Tcl_DStringAppendElement(dsPtr, "auto");
} else if (chanPtr->outputTranslation == TCL_TRANSLATE_CR) {
Tcl_DStringAppendElement(dsPtr, "cr");
} else if (chanPtr->outputTranslation == TCL_TRANSLATE_CRLF) {
Tcl_DStringAppendElement(dsPtr, "crlf");
} else {
Tcl_DStringAppendElement(dsPtr, "lf");
}
}
if (((chanPtr->flags & (TCL_READABLE|TCL_WRITABLE)) ==
(TCL_READABLE|TCL_WRITABLE)) && (len == 0)) {
Tcl_DStringEndSublist(dsPtr);
}
if (len > 0) {
return TCL_OK;
}
}
if (chanPtr->typePtr->getOptionProc != (Tcl_DriverGetOptionProc *) NULL) {
return (chanPtr->typePtr->getOptionProc) (chanPtr->instanceData,
optionName, dsPtr);
}
if (len == 0) {
return TCL_OK;
}
Tcl_SetErrno(EINVAL);
return TCL_ERROR;
}
/*
*----------------------------------------------------------------------
*
* Tcl_SetChannelOption --
*
* Sets an option on a channel.
*
* Results:
* A standard Tcl result. Also sets interp->result on error if
* interp is not NULL.
*
* Side effects:
* May modify an option on a device.
*
*----------------------------------------------------------------------
*/
int
Tcl_SetChannelOption(interp, chan, optionName, newValue)
Tcl_Interp *interp; /* For error reporting - can be NULL. */
Tcl_Channel chan; /* Channel on which to set mode. */
char *optionName; /* Which option to set? */
char *newValue; /* New value for option. */
{
int result; /* Result of channel type operation. */
int newMode; /* New (numeric) mode to sert. */
Channel *chanPtr; /* The real IO channel. */
size_t len; /* Length of optionName string. */
int argc;
char **argv;
Tcl_File outFile; /* Used to cancel async flush. */
chanPtr = (Channel *) chan;
/*
* Disallow options on dead channels -- channels that have been closed but
* not yet been deallocated. Such channels can be found if the exit
* handler for channel cleanup has run but the channel is still
* registered in an interpreter.
*/
if (chanPtr->flags & CHANNEL_DEAD) {
Tcl_SetErrno(EINVAL);
return -1;
}
len = strlen(optionName);
if ((len > 2) && (optionName[1] == 'b') &&
(strncmp(optionName, "-blocking", len) == 0)) {
if (Tcl_GetBoolean(interp, newValue, &newMode) == TCL_ERROR) {
return TCL_ERROR;
}
if (newMode) {
newMode = TCL_MODE_BLOCKING;
} else {
newMode = TCL_MODE_NONBLOCKING;
}
result = 0;
if (chanPtr->typePtr->blockModeProc != NULL) {
result = (chanPtr->typePtr->blockModeProc) (chanPtr->instanceData,
newMode);
}
if (result != 0) {
Tcl_SetErrno(result);
if (interp != (Tcl_Interp *) NULL) {
Tcl_AppendResult(interp, "error setting blocking mode: ",
Tcl_PosixError(interp), (char *) NULL);
}
return TCL_ERROR;
}
if (newMode == TCL_MODE_BLOCKING) {
chanPtr->flags &= (~(CHANNEL_NONBLOCKING | BG_FLUSH_SCHEDULED));
outFile = Tcl_GetChannelFile((Tcl_Channel) chanPtr, TCL_WRITABLE);
if (outFile != (Tcl_File) NULL) {
Tcl_DeleteFileHandler(outFile);
}
} else {
chanPtr->flags |= CHANNEL_NONBLOCKING;
}
return TCL_OK;
}
if ((len > 7) && (optionName[1] == 'b') &&
(strncmp(optionName, "-buffering", len) == 0)) {
len = strlen(newValue);
if ((newValue[0] == 'f') && (strncmp(newValue, "full", len) == 0)) {
chanPtr->flags &=
(~(CHANNEL_UNBUFFERED|CHANNEL_LINEBUFFERED));
} else if ((newValue[0] == 'l') &&
(strncmp(newValue, "line", len) == 0)) {
chanPtr->flags &= (~(CHANNEL_UNBUFFERED));
chanPtr->flags |= CHANNEL_LINEBUFFERED;
} else if ((newValue[0] == 'n') &&
(strncmp(newValue, "none", len) == 0)) {
chanPtr->flags &= (~(CHANNEL_LINEBUFFERED));
chanPtr->flags |= CHANNEL_UNBUFFERED;
} else {
if (interp != (Tcl_Interp *) NULL) {
Tcl_AppendResult(interp, "bad value for -buffering: ",
"must be one of full, line, or none",
(char *) NULL);
return TCL_ERROR;
}
}
return TCL_OK;
}
if ((len > 7) && (optionName[1] == 'b') &&
(strncmp(optionName, "-buffersize", len) == 0)) {
chanPtr->bufSize = atoi(newValue);
if ((chanPtr->bufSize < 10) || (chanPtr->bufSize > (1024 * 1024))) {
chanPtr->bufSize = CHANNELBUFFER_DEFAULT_SIZE;
}
return TCL_OK;
}
if ((len > 1) && (optionName[1] == 'e') &&
(strncmp(optionName, "-eofchar", len) == 0)) {
if (Tcl_SplitList(interp, newValue, &argc, &argv) == TCL_ERROR) {
return TCL_ERROR;
}
if (argc == 0) {
chanPtr->inEofChar = 0;
chanPtr->outEofChar = 0;
} else if (argc == 1) {
if (chanPtr->flags & TCL_WRITABLE) {
chanPtr->outEofChar = (int) argv[0][0];
}
if (chanPtr->flags & TCL_READABLE) {
chanPtr->inEofChar = (int) argv[0][0];
}
} else if (argc != 2) {
if (interp != (Tcl_Interp *) NULL) {
Tcl_AppendResult(interp,
"bad value for -eofchar: should be a list of one or",
" two elements", (char *) NULL);
}
ckfree((char *) argv);
return TCL_ERROR;
} else {
if (chanPtr->flags & TCL_READABLE) {
chanPtr->inEofChar = (int) argv[0][0];
}
if (chanPtr->flags & TCL_WRITABLE) {
chanPtr->outEofChar = (int) argv[1][0];
}
}
if (argv != (char **) NULL) {
ckfree((char *) argv);
}
return TCL_OK;
}
if ((len > 1) && (optionName[1] == 't') &&
(strncmp(optionName, "-translation", len) == 0)) {
if (Tcl_SplitList(interp, newValue, &argc, &argv) == TCL_ERROR) {
return TCL_ERROR;
}
if (argc == 1) {
if (chanPtr->flags & TCL_READABLE) {
chanPtr->flags &= (~(INPUT_SAW_CR));
if (strcmp(argv[0], "auto") == 0) {
chanPtr->inputTranslation = TCL_TRANSLATE_AUTO;
} else if (strcmp(argv[0], "binary") == 0) {
chanPtr->inEofChar = 0;
chanPtr->inputTranslation = TCL_TRANSLATE_LF;
} else if (strcmp(argv[0], "lf") == 0) {
chanPtr->inputTranslation = TCL_TRANSLATE_LF;
} else if (strcmp(argv[0], "cr") == 0) {
chanPtr->inputTranslation = TCL_TRANSLATE_CR;
} else if (strcmp(argv[0], "crlf") == 0) {
chanPtr->inputTranslation = TCL_TRANSLATE_CRLF;
} else if (strcmp(argv[0], "platform") == 0) {
chanPtr->inputTranslation = TCL_PLATFORM_TRANSLATION;
} else {
if (interp != (Tcl_Interp *) NULL) {
Tcl_AppendResult(interp,
"bad value for -translation: ",
"must be one of auto, binary, cr, lf, crlf,",
" or platform", (char *) NULL);
}
ckfree((char *) argv);
return TCL_ERROR;
}
}
if (chanPtr->flags & TCL_WRITABLE) {
if (strcmp(argv[0], "auto") == 0) {
/*
* This is a hack to get TCP sockets to produce output
* in CRLF mode if they are being set into AUTO mode.
* A better solution for achieving this effect will be
* coded later.
*/
if (strcmp(chanPtr->typePtr->typeName, "tcp") == 0) {
chanPtr->outputTranslation = TCL_TRANSLATE_CRLF;
} else {
chanPtr->outputTranslation = TCL_PLATFORM_TRANSLATION;
}
} else if (strcmp(argv[0], "binary") == 0) {
chanPtr->outEofChar = 0;
chanPtr->outputTranslation = TCL_TRANSLATE_LF;
} else if (strcmp(argv[0], "lf") == 0) {
chanPtr->outputTranslation = TCL_TRANSLATE_LF;
} else if (strcmp(argv[0], "cr") == 0) {
chanPtr->outputTranslation = TCL_TRANSLATE_CR;
} else if (strcmp(argv[0], "crlf") == 0) {
chanPtr->outputTranslation = TCL_TRANSLATE_CRLF;
} else if (strcmp(argv[0], "platform") == 0) {
chanPtr->outputTranslation = TCL_PLATFORM_TRANSLATION;
} else {
if (interp != (Tcl_Interp *) NULL) {
Tcl_AppendResult(interp,
"bad value for -translation: ",
"must be one of auto, binary, cr, lf, crlf,",
" or platform", (char *) NULL);
}
ckfree((char *) argv);
return TCL_ERROR;
}
}
} else if (argc != 2) {
if (interp != (Tcl_Interp *) NULL) {
Tcl_AppendResult(interp,
"bad value for -translation: must be a one or two",
" element list", (char *) NULL);
}
ckfree((char *) argv);
return TCL_ERROR;
} else {
if (chanPtr->flags & TCL_READABLE) {
if (argv[0][0] == '\0') {
/* Empty body. */
} else if (strcmp(argv[0], "auto") == 0) {
chanPtr->flags &= (~(INPUT_SAW_CR));
chanPtr->inputTranslation = TCL_TRANSLATE_AUTO;
} else if (strcmp(argv[0], "binary") == 0) {
chanPtr->inEofChar = 0;
chanPtr->flags &= (~(INPUT_SAW_CR));
chanPtr->inputTranslation = TCL_TRANSLATE_LF;
} else if (strcmp(argv[0], "lf") == 0) {
chanPtr->flags &= (~(INPUT_SAW_CR));
chanPtr->inputTranslation = TCL_TRANSLATE_LF;
} else if (strcmp(argv[0], "cr") == 0) {
chanPtr->flags &= (~(INPUT_SAW_CR));
chanPtr->inputTranslation = TCL_TRANSLATE_CR;
} else if (strcmp(argv[0], "crlf") == 0) {
chanPtr->flags &= (~(INPUT_SAW_CR));
chanPtr->inputTranslation = TCL_TRANSLATE_CRLF;
} else if (strcmp(argv[0], "platform") == 0) {
chanPtr->flags &= (~(INPUT_SAW_CR));
chanPtr->inputTranslation = TCL_PLATFORM_TRANSLATION;
} else {
if (interp != (Tcl_Interp *) NULL) {
Tcl_AppendResult(interp,
"bad value for -translation: ",
"must be one of auto, binary, cr, lf, crlf,",
" or platform", (char *) NULL);
}
ckfree((char *) argv);
return TCL_ERROR;
}
}
if (chanPtr->flags & TCL_WRITABLE) {
if (argv[1][0] == '\0') {
/* Empty body. */
} else if (strcmp(argv[1], "auto") == 0) {
/*
* This is a hack to get TCP sockets to produce output
* in CRLF mode if they are being set into AUTO mode.
* A better solution for achieving this effect will be
* coded later.
*/
if (strcmp(chanPtr->typePtr->typeName, "tcp") == 0) {
chanPtr->outputTranslation = TCL_TRANSLATE_CRLF;
} else {
chanPtr->outputTranslation = TCL_PLATFORM_TRANSLATION;
}
} else if (strcmp(argv[1], "binary") == 0) {
chanPtr->outEofChar = 0;
chanPtr->outputTranslation = TCL_TRANSLATE_LF;
} else if (strcmp(argv[1], "lf") == 0) {
chanPtr->outputTranslation = TCL_TRANSLATE_LF;
} else if (strcmp(argv[1], "cr") == 0) {
chanPtr->outputTranslation = TCL_TRANSLATE_CR;
} else if (strcmp(argv[1], "crlf") == 0) {
chanPtr->outputTranslation = TCL_TRANSLATE_CRLF;
} else if (strcmp(argv[1], "platform") == 0) {
chanPtr->outputTranslation = TCL_PLATFORM_TRANSLATION;
} else {
if (interp != (Tcl_Interp *) NULL) {
Tcl_AppendResult(interp,
"bad value for -translation: ",
"must be one of auto, binary, cr, lf, crlf,",
" or platform", (char *) NULL);
}
ckfree((char *) argv);
return TCL_ERROR;
}
}
}
ckfree((char *) argv);
return TCL_OK;
}
if (chanPtr->typePtr->setOptionProc != (Tcl_DriverSetOptionProc *) NULL) {
return (chanPtr->typePtr->setOptionProc) (chanPtr->instanceData,
interp, optionName, newValue);
}
if (interp != (Tcl_Interp *) NULL) {
Tcl_AppendResult(interp, "bad option \"", optionName,
"\": should be -blocking, -buffering, -buffersize, ",
"-eofchar, -translation, ",
"or channel type specific option",
(char *) NULL);
}
return TCL_ERROR;
}
/*
*----------------------------------------------------------------------
*
* CleanupChannelHandlers --
*
* Removes channel handlers that refer to the supplied interpreter,
* so that if the actual channel is not closed now, these handlers
* will not run on subsequent events on the channel. This would be
* erroneous, because the interpreter no longer has a reference to
* this channel.
*
* Results:
* None.
*
* Side effects:
* Removes channel handlers.
*
*----------------------------------------------------------------------
*/
static void
CleanupChannelHandlers(interp, chanPtr)
Tcl_Interp *interp;
Channel *chanPtr;
{
EventScriptRecord *sPtr, *prevPtr, *nextPtr;
/*
* Remove fileevent records on this channel that refer to the
* given interpreter.
*/
for (sPtr = chanPtr->scriptRecordPtr,
prevPtr = (EventScriptRecord *) NULL;
sPtr != (EventScriptRecord *) NULL;
sPtr = nextPtr) {
nextPtr = sPtr->nextPtr;
if (sPtr->interp == interp) {
if (prevPtr == (EventScriptRecord *) NULL) {
chanPtr->scriptRecordPtr = nextPtr;
} else {
prevPtr->nextPtr = nextPtr;
}
Tcl_DeleteChannelHandler((Tcl_Channel) chanPtr,
ChannelEventScriptInvoker, (ClientData) sPtr);
Tcl_EventuallyFree((ClientData) sPtr->script, TCL_DYNAMIC);
ckfree((char *) sPtr);
} else {
prevPtr = sPtr;
}
}
}
/*
*----------------------------------------------------------------------
*
* WaitForChannel --
*
* This procedure waits synchronously for a channel to become readable
* or writable, with an optional timeout.
*
* Results:
* None.
*
* Side effects:
* Time passes.
*
*----------------------------------------------------------------------
*/
static void
WaitForChannel(chanPtr, mask, timeout)
Channel *chanPtr; /* Handle for channel to wait for. */
int mask; /* What to wait for: OR'ed combination of
* TCL_READABLE, TCL_WRITABLE, and
* TCL_EXCEPTION. */
int timeout; /* Maximum amount of time to wait for one
* of the conditions in mask to occur, in
* milliseconds. A value of 0 means don't
* wait at all, and a value of -1 means
* wait forever. */
{
Tcl_Time abortTime, now, blockTime;
int present;
/*
* If there is a non-zero finite timeout, compute the time when
* we give up.
*/
if (timeout > 0) {
TclpGetTime(&now);
abortTime.sec = now.sec + timeout/1000;
abortTime.usec = now.usec + (timeout%1000)*1000;
if (abortTime.usec >= 1000000) {
abortTime.usec -= 1000000;
abortTime.sec += 1;
}
}
/*
* Loop in a mini-event loop of our own, waiting for either the
* file to become ready or a timeout to occur.
*/
while (1) {
(chanPtr->typePtr->watchChannelProc) (chanPtr->instanceData, mask);
if (timeout > 0) {
blockTime.sec = abortTime.sec - now.sec;
blockTime.usec = abortTime.usec - now.usec;
if (blockTime.usec < 0) {
blockTime.sec -= 1;
blockTime.usec += 1000000;
}
if (blockTime.sec < 0) {
blockTime.sec = 0;
blockTime.usec = 0;
}
Tcl_WaitForEvent(&blockTime);
} else if (timeout == 0) {
blockTime.sec = 0;
blockTime.usec = 0;
Tcl_WaitForEvent(&blockTime);
} else {
Tcl_WaitForEvent((Tcl_Time *) NULL);
}
present = (chanPtr->typePtr->channelReadyProc) (chanPtr->instanceData,
mask);
if (present != 0) {
break;
}
if (timeout == 0) {
break;
}
TclpGetTime(&now);
if ((abortTime.sec < now.sec)
|| ((abortTime.sec == now.sec)
&& (abortTime.usec <= now.usec))) {
break;
}
}
}
/*
*----------------------------------------------------------------------
*
* ChannelEventSourceExitProc --
*
* This procedure is called during exit cleanup to delete the channel
* event source. It deletes the event source for channels.
*
* Results:
* None.
*
* Side effects:
* Destroys the channel event source.
*
*----------------------------------------------------------------------
*/
/* ARGSUSED */
static void
ChannelEventSourceExitProc(clientData)
ClientData clientData; /* Not used. */
{
Tcl_DeleteEventSource(ChannelHandlerSetupProc, ChannelHandlerCheckProc,
(ClientData) NULL);
channelEventSourceCreated = 0;
}
/*
*----------------------------------------------------------------------
*
* ChannelHandlerSetupProc --
*
* This procedure is part of the event source for channel handlers.
* It is invoked by Tcl_DoOneEvent before it waits for events. The
* job of this procedure is to provide information to Tcl_DoOneEvent
* on how to wait for events (what files to watch).
*
* Results:
* None.
*
* Side effects:
* Tells the notifier what channels to watch.
*
*----------------------------------------------------------------------
*/
static void
ChannelHandlerSetupProc(clientData, flags)
ClientData clientData; /* Not used. */
int flags; /* Flags passed to Tk_DoOneEvent:
* if it doesn't include
* TCL_FILE_EVENTS then we do
* nothing. */
{
Tcl_Time dontBlock;
Channel *chanPtr, *nextChanPtr;
if (!(flags & TCL_FILE_EVENTS)) {
return;
}
dontBlock.sec = 0; dontBlock.usec = 0;
for (chanPtr = firstChanPtr; chanPtr != (Channel *) NULL;
chanPtr = nextChanPtr) {
nextChanPtr = chanPtr->nextChanPtr;
if (chanPtr->interestMask & TCL_READABLE) {
if ((!(chanPtr->flags & CHANNEL_BLOCKED)) &&
(chanPtr->inQueueHead != (ChannelBuffer *) NULL) &&
(chanPtr->inQueueHead->nextRemoved <
chanPtr->inQueueHead->nextAdded)) {
Tcl_SetMaxBlockTime(&dontBlock);
} else if (chanPtr->flags & TCL_READABLE) {
(chanPtr->typePtr->watchChannelProc) (chanPtr->instanceData,
TCL_READABLE);
}
}
if ((chanPtr->interestMask & TCL_WRITABLE) &&
(chanPtr->flags & TCL_WRITABLE)) {
(chanPtr->typePtr->watchChannelProc) (chanPtr->instanceData,
TCL_WRITABLE);
}
if ((chanPtr->interestMask & TCL_EXCEPTION) &&
(chanPtr->flags & (TCL_READABLE | TCL_WRITABLE))) {
(chanPtr->typePtr->watchChannelProc) (chanPtr->instanceData,
TCL_EXCEPTION);
}
}
}
/*
*----------------------------------------------------------------------
*
* ChannelHandlerCheckProc --
*
* This procedure is the second part (of three) of the event source
* for channels. It is invoked by Tcl_DoOneEvent after the wait for
* events is over. The job of this procedure is to test each channel
* to see if it is ready now, and if so, to create events and put them
* on the Tcl event queue.
*
* Results:
* None.
*
* Side effects:
* Makes entries on the Tcl event queue for each channel that is
* ready now.
*
*----------------------------------------------------------------------
*/
static void
ChannelHandlerCheckProc(clientData, flags)
ClientData clientData; /* Not used. */
int flags; /* Flags passed to Tk_DoOneEvent:
* if it doesn't include
* TCL_FILE_EVENTS then we do
* nothing. */
{
Channel *chanPtr, *nextChanPtr;
ChannelHandlerEvent *ePtr;
int readyMask;
if (!(flags & TCL_FILE_EVENTS)) {
return;
}
for (chanPtr = firstChanPtr;
chanPtr != (Channel *) NULL;
chanPtr = nextChanPtr) {
nextChanPtr = chanPtr->nextChanPtr;
readyMask = 0;
/*
* Check for readability.
*/
if (chanPtr->interestMask & TCL_READABLE) {
/*
* The channel is considered ready for reading if there is input
* buffered AND the last attempt to read from the channel did not
* return EWOULDBLOCK, OR if the underlying file is ready.
*
* NOTE that the input queue may contain empty buffers, hence the
* special check to see if the first input buffer is empty. The
* invariant is that if there is an empty buffer in the queue
* there is only one buffer in the queue, hence an empty first
* buffer indicates that there is no input queued.
*/
if ((!(chanPtr->flags & CHANNEL_BLOCKED)) &&
((chanPtr->inQueueHead != (ChannelBuffer *) NULL) &&
(chanPtr->inQueueHead->nextRemoved <
chanPtr->inQueueHead->nextAdded))) {
readyMask |= TCL_READABLE;
} else {
readyMask |= (chanPtr->typePtr->channelReadyProc)
(chanPtr->instanceData, TCL_READABLE);
}
}
/*
* Check for writability.
*/
if (chanPtr->interestMask & TCL_WRITABLE) {
/*
* The channel is considered ready for writing if there is no
* output buffered waiting to be written to the device, AND the
* underlying file is ready.
*/
if ((chanPtr->outQueueHead == (ChannelBuffer *) NULL) &&
(chanPtr->flags & TCL_WRITABLE)) {
readyMask |= (chanPtr->typePtr->channelReadyProc)
(chanPtr->instanceData, TCL_WRITABLE);
}
}
/*
* Check for exceptions.
*/
if (chanPtr->interestMask & TCL_EXCEPTION) {
readyMask |= (chanPtr->typePtr->channelReadyProc)
(chanPtr->instanceData, TCL_EXCEPTION);
}
/*
* If there are any events for this channel, put a notice into the
* Tcl event queue.
*/
if (readyMask != 0) {
ePtr = (ChannelHandlerEvent *) ckalloc((unsigned)
sizeof(ChannelHandlerEvent));
ePtr->header.proc = ChannelHandlerEventProc;
ePtr->chanPtr = chanPtr;
ePtr->readyMask = readyMask;
Tcl_QueueEvent((Tcl_Event *) ePtr, TCL_QUEUE_TAIL);
}
}
}
/*
*----------------------------------------------------------------------
*
* FlushEventProc --
*
* This routine dispatches a background flush event.
*
* Errors that occur during the write operation are stored
* inside the channel structure for future reporting by the next
* operation that uses this channel.
*
* Results:
* None.
*
* Side effects:
* Causes production of output on a channel.
*
*----------------------------------------------------------------------
*/
static void
FlushEventProc(clientData, mask)
ClientData clientData; /* Channel to produce output on. */
int mask; /* Not used. */
{
(void) FlushChannel(NULL, (Channel *) clientData, 1);
}
/*
*----------------------------------------------------------------------
*
* ChannelHandlerEventProc --
*
* This procedure is called by Tcl_DoOneEvent when a channel event
* reaches the front of the event queue. This procedure is responsible
* for actually handling the event by invoking the callback for the
* channel handler.
*
* Results:
* Returns 1 if the event was handled, meaning that it should be
* removed from the queue. Returns 0 if the event was not handled
* meaning that it should stay in the queue. The only time the event
* will not be handled is if the TCL_FILE_EVENTS flag bit is not
* set in the flags passed.
*
* NOTE: If the handler is deleted between the time the event is added
* to the queue and the time it reaches the head of the queue, the
* event is silently discarded (i.e. we return 1).
*
* Side effects:
* Whatever the channel handler callback procedure does.
*
*----------------------------------------------------------------------
*/
static int
ChannelHandlerEventProc(evPtr, flags)
Tcl_Event *evPtr; /* Event to service. */
int flags; /* Flags that indicate what events to
* handle, such as TCL_FILE_EVENTS. */
{
Channel *chanPtr;
ChannelHandler *chPtr;
ChannelHandlerEvent *ePtr;
NextChannelHandler nh;
if (!(flags & TCL_FILE_EVENTS)) {
return 0;
}
ePtr = (ChannelHandlerEvent *) evPtr;
chanPtr = ePtr->chanPtr;
/*
* Add this invocation to the list of recursive invocations of
* ChannelHandlerEventProc.
*/
nh.nextHandlerPtr = (ChannelHandler *) NULL;
nh.nestedHandlerPtr = nestedHandlerPtr;
nestedHandlerPtr = &nh;
for (chPtr = chanPtr->chPtr; chPtr != (ChannelHandler *) NULL; ) {
/*
* If this channel handler is interested in any of the events that
* have occurred on the channel, invoke its procedure.
*/
if ((chPtr->mask & ePtr->readyMask) != 0) {
nh.nextHandlerPtr = chPtr->nextPtr;
(*(chPtr->proc))(chPtr->clientData, ePtr->readyMask);
chPtr = nh.nextHandlerPtr;
} else {
chPtr = chPtr->nextPtr;
}
}
nestedHandlerPtr = nh.nestedHandlerPtr;
return 1;
}
/*
*----------------------------------------------------------------------
*
* Tcl_CreateChannelHandler --
*
* Arrange for a given procedure to be invoked whenever the
* channel indicated by the chanPtr arg becomes readable or
* writable.
*
* Results:
* None.
*
* Side effects:
* From now on, whenever the I/O channel given by chanPtr becomes
* ready in the way indicated by mask, proc will be invoked.
* See the manual entry for details on the calling sequence
* to proc. If there is already an event handler for chan, proc
* and clientData, then the mask will be updated.
*
*----------------------------------------------------------------------
*/
void
Tcl_CreateChannelHandler(chan, mask, proc, clientData)
Tcl_Channel chan; /* The channel to create the handler for. */
int mask; /* OR'ed combination of TCL_READABLE,
* TCL_WRITABLE, and TCL_EXCEPTION:
* indicates conditions under which
* proc should be called. Use 0 to
* disable a registered handler. */
Tcl_ChannelProc *proc; /* Procedure to call for each
* selected event. */
ClientData clientData; /* Arbitrary data to pass to proc. */
{
ChannelHandler *chPtr;
Channel *chanPtr;
chanPtr = (Channel *) chan;
/*
* Ensure that the channel event source is registered with the Tcl
* notification mechanism.
*/
if (!channelEventSourceCreated) {
channelEventSourceCreated = 1;
Tcl_CreateEventSource(ChannelHandlerSetupProc, ChannelHandlerCheckProc,
(ClientData) NULL);
Tcl_CreateExitHandler(ChannelEventSourceExitProc, (ClientData) NULL);
}
/*
* Check whether this channel handler is not already registered. If
* it is not, create a new record, else reuse existing record (smash
* current values).
*/
for (chPtr = chanPtr->chPtr;
chPtr != (ChannelHandler *) NULL;
chPtr = chPtr->nextPtr) {
if ((chPtr->chanPtr == chanPtr) && (chPtr->proc == proc) &&
(chPtr->clientData == clientData)) {
break;
}
}
if (chPtr == (ChannelHandler *) NULL) {
chPtr = (ChannelHandler *) ckalloc((unsigned) sizeof(ChannelHandler));
chPtr->mask = 0;
chPtr->proc = proc;
chPtr->clientData = clientData;
chPtr->chanPtr = chanPtr;
chPtr->nextPtr = chanPtr->chPtr;
chanPtr->chPtr = chPtr;
}
/*
* The remainder of the initialization below is done regardless of
* whether or not this is a new record or a modification of an old
* one.
*/
chPtr->mask = mask;
/*
* Recompute the interest mask for the channel - this call may actually
* be disabling an existing handler..
*/
chanPtr->interestMask = 0;
for (chPtr = chanPtr->chPtr;
chPtr != (ChannelHandler *) NULL;
chPtr = chPtr->nextPtr) {
chanPtr->interestMask |= chPtr->mask;
}
}
/*
*----------------------------------------------------------------------
*
* Tcl_DeleteChannelHandler --
*
* Cancel a previously arranged callback arrangement for an IO
* channel.
*
* Results:
* None.
*
* Side effects:
* If a callback was previously registered for this chan, proc and
* clientData , it is removed and the callback will no longer be called
* when the channel becomes ready for IO.
*
*----------------------------------------------------------------------
*/
void
Tcl_DeleteChannelHandler(chan, proc, clientData)
Tcl_Channel chan; /* The channel for which to remove the
* callback. */
Tcl_ChannelProc *proc; /* The procedure in the callback to delete. */
ClientData clientData; /* The client data in the callback
* to delete. */
{
ChannelHandler *chPtr, *prevChPtr;
Channel *chanPtr;
NextChannelHandler *nhPtr;
chanPtr = (Channel *) chan;
/*
* Find the entry and the previous one in the list.
*/
for (prevChPtr = (ChannelHandler *) NULL, chPtr = chanPtr->chPtr;
chPtr != (ChannelHandler *) NULL;
chPtr = chPtr->nextPtr) {
if ((chPtr->chanPtr == chanPtr) && (chPtr->clientData == clientData)
&& (chPtr->proc == proc)) {
break;
}
prevChPtr = chPtr;
}
/*
* If ChannelHandlerEventProc is about to process this handler, tell it to
* process the next one instead - we are going to delete *this* one.
*/
for (nhPtr = nestedHandlerPtr;
nhPtr != (NextChannelHandler *) NULL;
nhPtr = nhPtr->nestedHandlerPtr) {
if (nhPtr->nextHandlerPtr == chPtr) {
nhPtr->nextHandlerPtr = chPtr->nextPtr;
}
}
/*
* If found, splice the entry out of the list.
*/
if (chPtr == (ChannelHandler *) NULL) {
return;
}
if (prevChPtr == (ChannelHandler *) NULL) {
chanPtr->chPtr = chPtr->nextPtr;
} else {
prevChPtr->nextPtr = chPtr->nextPtr;
}
ckfree((char *) chPtr);
/*
* Recompute the interest list for the channel, so that infinite loops
* will not result if Tcl_DeleteChanelHandler is called inside an event.
*/
chanPtr->interestMask = 0;
for (chPtr = chanPtr->chPtr;
chPtr != (ChannelHandler *) NULL;
chPtr = chPtr->nextPtr) {
chanPtr->interestMask |= chPtr->mask;
}
}
/*
*----------------------------------------------------------------------
*
* ReturnScriptRecord --
*
* Get a script stored for this channel with this interpreter.
*
* Results:
* A standard Tcl result.
*
* Side effects:
* Sets interp->result to the script.
*
*----------------------------------------------------------------------
*/
static void
ReturnScriptRecord(interp, chanPtr, mask)
Tcl_Interp *interp; /* The interpreter in which the script
* is to be executed. */
Channel *chanPtr; /* The channel for which the script is
* stored. */
int mask; /* Events in mask must overlap with events
* for which this script is stored. */
{
EventScriptRecord *esPtr;
for (esPtr = chanPtr->scriptRecordPtr;
esPtr != (EventScriptRecord *) NULL;
esPtr = esPtr->nextPtr) {
if ((esPtr->interp == interp) && (esPtr->mask == mask)) {
interp->result = esPtr->script;
return;
}
}
}
/*
*----------------------------------------------------------------------
*
* DeleteScriptRecord --
*
* Delete a script record for this combination of channel, interp
* and mask.
*
* Results:
* None.
*
* Side effects:
* Deletes a script record and cancels a channel event handler.
*
*----------------------------------------------------------------------
*/
static void
DeleteScriptRecord(interp, chanPtr, mask)
Tcl_Interp *interp; /* Interpreter in which script was to be
* executed. */
Channel *chanPtr; /* The channel for which to delete the
* script record (if any). */
int mask; /* Events in mask must exactly match mask
* of script to delete. */
{
EventScriptRecord *esPtr, *prevEsPtr;
for (esPtr = chanPtr->scriptRecordPtr,
prevEsPtr = (EventScriptRecord *) NULL;
esPtr != (EventScriptRecord *) NULL;
prevEsPtr = esPtr, esPtr = esPtr->nextPtr) {
if ((esPtr->interp == interp) && (esPtr->mask == mask)) {
if (esPtr == chanPtr->scriptRecordPtr) {
chanPtr->scriptRecordPtr = esPtr->nextPtr;
} else {
prevEsPtr->nextPtr = esPtr->nextPtr;
}
Tcl_DeleteChannelHandler((Tcl_Channel) chanPtr,
ChannelEventScriptInvoker, (ClientData) esPtr);
Tcl_EventuallyFree((ClientData)esPtr->script, TCL_DYNAMIC);
ckfree((char *) esPtr);
break;
}
}
}
/*
*----------------------------------------------------------------------
*
* CreateScriptRecord --
*
* Creates a record to store a script to be executed when a specific
* event fires on a specific channel.
*
* Results:
* None.
*
* Side effects:
* Causes the script to be stored for later execution.
*
*----------------------------------------------------------------------
*/
static void
CreateScriptRecord(interp, chanPtr, mask, script)
Tcl_Interp *interp; /* Interpreter in which to execute
* the stored script. */
Channel *chanPtr; /* Channel for which script is to
* be stored. */
int mask; /* Set of events for which script
* will be invoked. */
char *script; /* A copy of this script is stored
* in the newly created record. */
{
EventScriptRecord *esPtr;
for (esPtr = chanPtr->scriptRecordPtr;
esPtr != (EventScriptRecord *) NULL;
esPtr = esPtr->nextPtr) {
if ((esPtr->interp == interp) && (esPtr->mask == mask)) {
Tcl_EventuallyFree((ClientData)esPtr->script, TCL_DYNAMIC);
esPtr->script = (char *) NULL;
break;
}
}
if (esPtr == (EventScriptRecord *) NULL) {
esPtr = (EventScriptRecord *) ckalloc((unsigned)
sizeof(EventScriptRecord));
Tcl_CreateChannelHandler((Tcl_Channel) chanPtr, mask,
ChannelEventScriptInvoker, (ClientData) esPtr);
esPtr->nextPtr = chanPtr->scriptRecordPtr;
chanPtr->scriptRecordPtr = esPtr;
}
esPtr->chanPtr = chanPtr;
esPtr->interp = interp;
esPtr->mask = mask;
esPtr->script = ckalloc((unsigned) (strlen(script) + 1));
strcpy(esPtr->script, script);
}
/*
*----------------------------------------------------------------------
*
* ChannelEventScriptInvoker --
*
* Invokes a script scheduled by "fileevent" for when the channel
* becomes ready for IO. This function is invoked by the channel
* handler which was created by the Tcl "fileevent" command.
*
* Results:
* None.
*
* Side effects:
* Whatever the script does.
*
*----------------------------------------------------------------------
*/
static void
ChannelEventScriptInvoker(clientData, mask)
ClientData clientData; /* The script+interp record. */
int mask; /* Not used. */
{
Tcl_Interp *interp; /* Interpreter in which to eval the script. */
Channel *chanPtr; /* The channel for which this handler is
* registered. */
char *script; /* Script to eval. */
EventScriptRecord *esPtr; /* The event script + interpreter to eval it
* in. */
int result; /* Result of call to eval script. */
esPtr = (EventScriptRecord *) clientData;
chanPtr = esPtr->chanPtr;
mask = esPtr->mask;
interp = esPtr->interp;
script = esPtr->script;
/*
* We must preserve the channel, script and interpreter because each of
* these may be deleted in the evaluation. If an error later occurs, we
* want to have the relevant data around for error reporting and so we
* can safely delete it.
*/
Tcl_Preserve((ClientData) chanPtr);
Tcl_Preserve((ClientData) script);
Tcl_Preserve((ClientData) interp);
result = Tcl_GlobalEval(esPtr->interp, script);
/*
* On error, cause a background error and remove the channel handler
* and the script record.
*
* NOTE: Must delete channel handler before causing the background error
* because the background error may want to reinstall the handler.
*/
if (result != TCL_OK) {
DeleteScriptRecord(interp, chanPtr, mask);
Tcl_BackgroundError(interp);
}
Tcl_Release((ClientData) chanPtr);
Tcl_Release((ClientData) script);
Tcl_Release((ClientData) interp);
}
/*
*----------------------------------------------------------------------
*
* Tcl_FileEventCmd --
*
* This procedure implements the "fileevent" Tcl command. See the
* user documentation for details on what it does. This command is
* based on the Tk command "fileevent" which in turn is based on work
* contributed by Mark Diekhans.
*
* Results:
* A standard Tcl result.
*
* Side effects:
* May create a channel handler for the specified channel.
*
*----------------------------------------------------------------------
*/
/* ARGSUSED */
int
Tcl_FileEventCmd(clientData, interp, argc, argv)
ClientData clientData; /* Not used. */
Tcl_Interp *interp; /* Interpreter in which the channel
* for which to create the handler
* is found. */
int argc; /* Number of arguments. */
char **argv; /* Argument strings. */
{
Channel *chanPtr; /* The channel to create
* the handler for. */
Tcl_Channel chan; /* The opaque type for the channel. */
int c; /* First char of mode argument. */
int mask; /* Mask for events of interest. */
size_t length; /* Length of mode argument. */
/*
* Parse arguments.
*/
if ((argc != 3) && (argc != 4)) {
Tcl_AppendResult(interp, "wrong # args: must be \"", argv[0],
" channelId event ?script?", (char *) NULL);
return TCL_ERROR;
}
c = argv[2][0];
length = strlen(argv[2]);
if ((c == 'r') && (strncmp(argv[2], "readable", length) == 0)) {
mask = TCL_READABLE;
} else if ((c == 'w') && (strncmp(argv[2], "writable", length) == 0)) {
mask = TCL_WRITABLE;
} else {
Tcl_AppendResult(interp, "bad event name \"", argv[2],
"\": must be readable or writable", (char *) NULL);
return TCL_ERROR;
}
chan = Tcl_GetChannel(interp, argv[1], NULL);
if (chan == (Tcl_Channel) NULL) {
return TCL_ERROR;
}
chanPtr = (Channel *) chan;
if ((chanPtr->flags & mask) == 0) {
Tcl_AppendResult(interp, "channel is not ",
(mask == TCL_READABLE) ? "readable" : "writable",
(char *) NULL);
return TCL_ERROR;
}
/*
* If we are supposed to return the script, do so.
*/
if (argc == 3) {
ReturnScriptRecord(interp, chanPtr, mask);
return TCL_OK;
}
/*
* If we are supposed to delete a stored script, do so.
*/
if (argv[3][0] == 0) {
DeleteScriptRecord(interp, chanPtr, mask);
return TCL_OK;
}
/*
* Make the script record that will link between the event and the
* script to invoke. This also creates a channel event handler which
* will evaluate the script in the supplied interpreter.
*/
CreateScriptRecord(interp, chanPtr, mask, argv[3]);
return TCL_OK;
}
/*
*----------------------------------------------------------------------
*
* TclTestChannelCmd --
*
* Implements the Tcl "testchannel" debugging command and its
* subcommands. This is part of the testing environment but must be
* in this file instead of tclTest.c because it needs access to the
* fields of struct Channel.
*
* Results:
* A standard Tcl result.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
/* ARGSUSED */
int
TclTestChannelCmd(clientData, interp, argc, argv)
ClientData clientData; /* Not used. */
Tcl_Interp *interp; /* Interpreter for result. */
int argc; /* Count of additional args. */
char **argv; /* Additional arg strings. */
{
char *cmdName; /* Sub command. */
Tcl_HashTable *hTblPtr; /* Hash table of channels. */
Tcl_HashSearch hSearch; /* Search variable. */
Tcl_HashEntry *hPtr; /* Search variable. */
Channel *chanPtr; /* The actual channel. */
Tcl_Channel chan; /* The opaque type. */
size_t len; /* Length of subcommand string. */
int IOQueued; /* How much IO is queued inside channel? */
ChannelBuffer *bufPtr; /* For iterating over queued IO. */
char buf[128]; /* For sprintf. */
if (argc < 2) {
Tcl_AppendResult(interp, "wrong # args: should be \"", argv[0],
" subcommand ?additional args..?\"", (char *) NULL);
return TCL_ERROR;
}
cmdName = argv[1];
len = strlen(cmdName);
chanPtr = (Channel *) NULL;
if (argc > 2) {
chan = Tcl_GetChannel(interp, argv[2], NULL);
if (chan == (Tcl_Channel) NULL) {
return TCL_ERROR;
}
chanPtr = (Channel *) chan;
}
if ((cmdName[0] == 'i') && (strncmp(cmdName, "info", len) == 0)) {
if (argc != 3) {
Tcl_AppendResult(interp, "wrong # args: should be \"", argv[0],
" info channelName\"", (char *) NULL);
return TCL_ERROR;
}
Tcl_AppendElement(interp, argv[2]);
Tcl_AppendElement(interp, chanPtr->typePtr->typeName);
if (chanPtr->flags & TCL_READABLE) {
Tcl_AppendElement(interp, "read");
} else {
Tcl_AppendElement(interp, "");
}
if (chanPtr->flags & TCL_WRITABLE) {
Tcl_AppendElement(interp, "write");
} else {
Tcl_AppendElement(interp, "");
}
if (chanPtr->flags & CHANNEL_NONBLOCKING) {
Tcl_AppendElement(interp, "nonblocking");
} else {
Tcl_AppendElement(interp, "blocking");
}
if (chanPtr->flags & CHANNEL_LINEBUFFERED) {
Tcl_AppendElement(interp, "line");
} else if (chanPtr->flags & CHANNEL_UNBUFFERED) {
Tcl_AppendElement(interp, "none");
} else {
Tcl_AppendElement(interp, "full");
}
if (chanPtr->flags & BG_FLUSH_SCHEDULED) {
Tcl_AppendElement(interp, "async_flush");
} else {
Tcl_AppendElement(interp, "");
}
if (chanPtr->flags & CHANNEL_EOF) {
Tcl_AppendElement(interp, "eof");
} else {
Tcl_AppendElement(interp, "");
}
if (chanPtr->flags & CHANNEL_BLOCKED) {
Tcl_AppendElement(interp, "blocked");
} else {
Tcl_AppendElement(interp, "unblocked");
}
if (chanPtr->inputTranslation == TCL_TRANSLATE_AUTO) {
Tcl_AppendElement(interp, "auto");
if (chanPtr->flags & INPUT_SAW_CR) {
Tcl_AppendElement(interp, "saw_cr");
} else {
Tcl_AppendElement(interp, "");
}
} else if (chanPtr->inputTranslation == TCL_TRANSLATE_LF) {
Tcl_AppendElement(interp, "lf");
Tcl_AppendElement(interp, "");
} else if (chanPtr->inputTranslation == TCL_TRANSLATE_CR) {
Tcl_AppendElement(interp, "cr");
Tcl_AppendElement(interp, "");
} else if (chanPtr->inputTranslation == TCL_TRANSLATE_CRLF) {
Tcl_AppendElement(interp, "crlf");
if (chanPtr->flags & INPUT_SAW_CR) {
Tcl_AppendElement(interp, "queued_cr");
} else {
Tcl_AppendElement(interp, "");
}
}
if (chanPtr->outputTranslation == TCL_TRANSLATE_AUTO) {
Tcl_AppendElement(interp, "auto");
} else if (chanPtr->outputTranslation == TCL_TRANSLATE_LF) {
Tcl_AppendElement(interp, "lf");
} else if (chanPtr->outputTranslation == TCL_TRANSLATE_CR) {
Tcl_AppendElement(interp, "cr");
} else if (chanPtr->outputTranslation == TCL_TRANSLATE_CRLF) {
Tcl_AppendElement(interp, "crlf");
}
for (IOQueued = 0, bufPtr = chanPtr->inQueueHead;
bufPtr != (ChannelBuffer *) NULL;
bufPtr = bufPtr->nextPtr) {
IOQueued += bufPtr->nextAdded - bufPtr->nextRemoved;
}
sprintf(buf, "%d", IOQueued);
Tcl_AppendElement(interp, buf);
IOQueued = 0;
if (chanPtr->curOutPtr != (ChannelBuffer *) NULL) {
IOQueued = chanPtr->curOutPtr->nextAdded -
chanPtr->curOutPtr->nextRemoved;
}
for (bufPtr = chanPtr->outQueueHead;
bufPtr != (ChannelBuffer *) NULL;
bufPtr = bufPtr->nextPtr) {
IOQueued += (bufPtr->nextAdded - bufPtr->nextRemoved);
}
sprintf(buf, "%d", IOQueued);
Tcl_AppendElement(interp, buf);
sprintf(buf, "%d", Tcl_Tell((Tcl_Channel) chanPtr));
Tcl_AppendElement(interp, buf);
sprintf(buf, "%d", chanPtr->refCount);
Tcl_AppendElement(interp, buf);
return TCL_OK;
}
if ((cmdName[0] == 'i') &&
(strncmp(cmdName, "inputbuffered", len) == 0)) {
if (argc != 3) {
Tcl_AppendResult(interp, "channel name required",
(char *) NULL);
return TCL_ERROR;
}
for (IOQueued = 0, bufPtr = chanPtr->inQueueHead;
bufPtr != (ChannelBuffer *) NULL;
bufPtr = bufPtr->nextPtr) {
IOQueued += bufPtr->nextAdded - bufPtr->nextRemoved;
}
sprintf(buf, "%d", IOQueued);
Tcl_AppendResult(interp, buf, (char *) NULL);
return TCL_OK;
}
if ((cmdName[0] == 'm') && (strncmp(cmdName, "mode", len) == 0)) {
if (argc != 3) {
Tcl_AppendResult(interp, "channel name required",
(char *) NULL);
return TCL_ERROR;
}
if (chanPtr->flags & TCL_READABLE) {
Tcl_AppendElement(interp, "read");
} else {
Tcl_AppendElement(interp, "");
}
if (chanPtr->flags & TCL_WRITABLE) {
Tcl_AppendElement(interp, "write");
} else {
Tcl_AppendElement(interp, "");
}
return TCL_OK;
}
if ((cmdName[0] == 'n') && (strncmp(cmdName, "name", len) == 0)) {
if (argc != 3) {
Tcl_AppendResult(interp, "channel name required",
(char *) NULL);
return TCL_ERROR;
}
Tcl_AppendResult(interp, chanPtr->channelName, (char *) NULL);
return TCL_OK;
}
if ((cmdName[0] == 'o') && (strncmp(cmdName, "open", len) == 0)) {
hTblPtr = (Tcl_HashTable *) Tcl_GetAssocData(interp, "tclIO", NULL);
if (hTblPtr == (Tcl_HashTable *) NULL) {
return TCL_OK;
}
for (hPtr = Tcl_FirstHashEntry(hTblPtr, &hSearch);
hPtr != (Tcl_HashEntry *) NULL;
hPtr = Tcl_NextHashEntry(&hSearch)) {
Tcl_AppendElement(interp, Tcl_GetHashKey(hTblPtr, hPtr));
}
return TCL_OK;
}
if ((cmdName[0] == 'o') &&
(strncmp(cmdName, "outputbuffered", len) == 0)) {
if (argc != 3) {
Tcl_AppendResult(interp, "channel name required",
(char *) NULL);
return TCL_ERROR;
}
IOQueued = 0;
if (chanPtr->curOutPtr != (ChannelBuffer *) NULL) {
IOQueued = chanPtr->curOutPtr->nextAdded -
chanPtr->curOutPtr->nextRemoved;
}
for (bufPtr = chanPtr->outQueueHead;
bufPtr != (ChannelBuffer *) NULL;
bufPtr = bufPtr->nextPtr) {
IOQueued += (bufPtr->nextAdded - bufPtr->nextRemoved);
}
sprintf(buf, "%d", IOQueued);
Tcl_AppendResult(interp, buf, (char *) NULL);
return TCL_OK;
}
if ((cmdName[0] == 'q') &&
(strncmp(cmdName, "queuedcr", len) == 0)) {
if (argc != 3) {
Tcl_AppendResult(interp, "channel name required",
(char *) NULL);
return TCL_ERROR;
}
Tcl_AppendResult(interp,
(chanPtr->flags & INPUT_SAW_CR) ? "1" : "0",
(char *) NULL);
return TCL_OK;
}
if ((cmdName[0] == 'r') && (strncmp(cmdName, "readable", len) == 0)) {
hTblPtr = (Tcl_HashTable *) Tcl_GetAssocData(interp, "tclIO", NULL);
if (hTblPtr == (Tcl_HashTable *) NULL) {
return TCL_OK;
}
for (hPtr = Tcl_FirstHashEntry(hTblPtr, &hSearch);
hPtr != (Tcl_HashEntry *) NULL;
hPtr = Tcl_NextHashEntry(&hSearch)) {
chanPtr = (Channel *) Tcl_GetHashValue(hPtr);
if (chanPtr->flags & TCL_READABLE) {
Tcl_AppendElement(interp, Tcl_GetHashKey(hTblPtr, hPtr));
}
}
return TCL_OK;
}
if ((cmdName[0] == 'r') && (strncmp(cmdName, "refcount", len) == 0)) {
if (argc != 3) {
Tcl_AppendResult(interp, "channel name required",
(char *) NULL);
return TCL_ERROR;
}
sprintf(buf, "%d", chanPtr->refCount);
Tcl_AppendResult(interp, buf, (char *) NULL);
return TCL_OK;
}
if ((cmdName[0] == 't') && (strncmp(cmdName, "type", len) == 0)) {
if (argc != 3) {
Tcl_AppendResult(interp, "channel name required",
(char *) NULL);
return TCL_ERROR;
}
Tcl_AppendResult(interp, chanPtr->typePtr->typeName, (char *) NULL);
return TCL_OK;
}
if ((cmdName[0] == 'w') && (strncmp(cmdName, "writable", len) == 0)) {
hTblPtr = (Tcl_HashTable *) Tcl_GetAssocData(interp, "tclIO", NULL);
if (hTblPtr == (Tcl_HashTable *) NULL) {
return TCL_OK;
}
for (hPtr = Tcl_FirstHashEntry(hTblPtr, &hSearch);
hPtr != (Tcl_HashEntry *) NULL;
hPtr = Tcl_NextHashEntry(&hSearch)) {
chanPtr = (Channel *) Tcl_GetHashValue(hPtr);
if (chanPtr->flags & TCL_WRITABLE) {
Tcl_AppendElement(interp, Tcl_GetHashKey(hTblPtr, hPtr));
}
}
return TCL_OK;
}
Tcl_AppendResult(interp, "bad option \"", cmdName, "\": should be ",
"info, open, readable, or writable",
(char *) NULL);
return TCL_ERROR;
}
/*
*----------------------------------------------------------------------
*
* TclTestChannelEventCmd --
*
* This procedure implements the "testchannelevent" command. It is
* used to test the Tcl channel event mechanism. It is present in
* this file instead of tclTest.c because it needs access to the
* internal structure of the channel.
*
* Results:
* A standard Tcl result.
*
* Side effects:
* Creates, deletes and returns channel event handlers.
*
*----------------------------------------------------------------------
*/
/* ARGSUSED */
int
TclTestChannelEventCmd(dummy, interp, argc, argv)
ClientData dummy; /* Not used. */
Tcl_Interp *interp; /* Current interpreter. */
int argc; /* Number of arguments. */
char **argv; /* Argument strings. */
{
Channel *chanPtr;
EventScriptRecord *esPtr, *prevEsPtr, *nextEsPtr;
char *cmd;
int index, i, mask, len;
if ((argc < 3) || (argc > 5)) {
Tcl_AppendResult(interp, "wrong # args: should be \"", argv[0],
" channelName cmd ?arg1? ?arg2?\"", (char *) NULL);
return TCL_ERROR;
}
chanPtr = (Channel *) Tcl_GetChannel(interp, argv[1], NULL);
if (chanPtr == (Channel *) NULL) {
return TCL_ERROR;
}
cmd = argv[2];
len = strlen(cmd);
if ((cmd[0] == 'a') && (strncmp(cmd, "add", (unsigned) len) == 0)) {
if (argc != 5) {
Tcl_AppendResult(interp, "wrong # args: should be \"", argv[0],
" channelName add eventSpec script\"", (char *) NULL);
return TCL_ERROR;
}
if (strcmp(argv[3], "readable") == 0) {
mask = TCL_READABLE;
} else if (strcmp(argv[3], "writable") == 0) {
mask = TCL_WRITABLE;
} else {
Tcl_AppendResult(interp, "bad event name \"", argv[3],
"\": must be readable or writable", (char *) NULL);
return TCL_ERROR;
}
esPtr = (EventScriptRecord *) ckalloc((unsigned)
sizeof(EventScriptRecord));
esPtr->nextPtr = chanPtr->scriptRecordPtr;
chanPtr->scriptRecordPtr = esPtr;
esPtr->chanPtr = chanPtr;
esPtr->interp = interp;
esPtr->mask = mask;
esPtr->script = ckalloc((unsigned) (strlen(argv[4]) + 1));
strcpy(esPtr->script, argv[4]);
Tcl_CreateChannelHandler((Tcl_Channel) chanPtr, mask,
ChannelEventScriptInvoker, (ClientData) esPtr);
return TCL_OK;
}
if ((cmd[0] == 'd') && (strncmp(cmd, "delete", (unsigned) len) == 0)) {
if (argc != 4) {
Tcl_AppendResult(interp, "wrong # args: should be \"", argv[0],
" channelName delete index\"", (char *) NULL);
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[3], &index) == TCL_ERROR) {
return TCL_ERROR;
}
if (index < 0) {
Tcl_AppendResult(interp, "bad event index: ", argv[3],
": must be nonnegative", (char *) NULL);
return TCL_ERROR;
}
for (i = 0, esPtr = chanPtr->scriptRecordPtr;
(i < index) && (esPtr != (EventScriptRecord *) NULL);
i++, esPtr = esPtr->nextPtr) {
/* Empty loop body. */
}
if (esPtr == (EventScriptRecord *) NULL) {
Tcl_AppendResult(interp, "bad event index ", argv[3],
": out of range", (char *) NULL);
return TCL_ERROR;
}
if (esPtr == chanPtr->scriptRecordPtr) {
chanPtr->scriptRecordPtr = esPtr->nextPtr;
} else {
for (prevEsPtr = chanPtr->scriptRecordPtr;
(prevEsPtr != (EventScriptRecord *) NULL) &&
(prevEsPtr->nextPtr != esPtr);
prevEsPtr = prevEsPtr->nextPtr) {
/* Empty loop body. */
}
if (prevEsPtr == (EventScriptRecord *) NULL) {
panic("TclTestChannelEventCmd: damaged event script list");
}
prevEsPtr->nextPtr = esPtr->nextPtr;
}
Tcl_DeleteChannelHandler((Tcl_Channel) chanPtr,
ChannelEventScriptInvoker, (ClientData) esPtr);
Tcl_EventuallyFree((ClientData)esPtr->script, TCL_DYNAMIC);
ckfree((char *) esPtr);
return TCL_OK;
}
if ((cmd[0] == 'l') && (strncmp(cmd, "list", (unsigned) len) == 0)) {
if (argc != 3) {
Tcl_AppendResult(interp, "wrong # args: should be \"", argv[0],
" channelName list\"", (char *) NULL);
return TCL_ERROR;
}
for (esPtr = chanPtr->scriptRecordPtr;
esPtr != (EventScriptRecord *) NULL;
esPtr = esPtr->nextPtr) {
Tcl_AppendElement(interp,
esPtr->mask == TCL_READABLE ? "readable" : "writable");
Tcl_AppendElement(interp, esPtr->script);
}
return TCL_OK;
}
if ((cmd[0] == 'r') && (strncmp(cmd, "removeall", (unsigned) len) == 0)) {
if (argc != 3) {
Tcl_AppendResult(interp, "wrong # args: should be \"", argv[0],
" channelName removeall\"", (char *) NULL);
return TCL_ERROR;
}
for (esPtr = chanPtr->scriptRecordPtr;
esPtr != (EventScriptRecord *) NULL;
esPtr = nextEsPtr) {
nextEsPtr = esPtr->nextPtr;
Tcl_DeleteChannelHandler((Tcl_Channel) chanPtr,
ChannelEventScriptInvoker, (ClientData) esPtr);
Tcl_EventuallyFree((ClientData)esPtr->script, TCL_DYNAMIC);
ckfree((char *) esPtr);
}
chanPtr->scriptRecordPtr = (EventScriptRecord *) NULL;
return TCL_OK;
}
Tcl_AppendResult(interp, "bad command ", cmd, ", must be one of ",
"add, delete, list, or removeall", (char *) NULL);
return TCL_ERROR;
}