archie/tcl7.3/tclEnv.c

/* 
 * tclEnv.c --
 *
 *	Tcl support for environment variables, including a setenv
 *	procedure.
 *
 * Copyright (c) 1991-1993 The Regents of the University of California.
 * All rights reserved.
 *
 * Permission is hereby granted, without written agreement and without
 * license or royalty fees, to use, copy, modify, and distribute this
 * software and its documentation for any purpose, provided that the
 * above copyright notice and the following two paragraphs appear in
 * all copies of this software.
 * 
 * IN NO EVENT SHALL THE UNIVERSITY OF CALIFORNIA BE LIABLE TO ANY PARTY FOR
 * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
 * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF THE UNIVERSITY OF
 * CALIFORNIA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * THE UNIVERSITY OF CALIFORNIA SPECIFICALLY DISCLAIMS ANY WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
 * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
 * ON AN "AS IS" BASIS, AND THE UNIVERSITY OF CALIFORNIA HAS NO OBLIGATION TO
 * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
 */

#ifndef lint
static char rcsid[] = "$Header: /user6/ouster/tcl/RCS/tclEnv.c,v 1.17 93/10/13 17:16:56 ouster Exp $ SPRITE (Berkeley)";
#endif /* not lint */

/*
 * The putenv and setenv definitions below cause any system prototypes for
 * those procedures to be ignored so that there won't be a clash when the
 * versions in this file are compiled.
 */

#define putenv ignore_putenv
#define setenv ignore_setenv
#include "tclInt.h"
#include "tclUnix.h"
#undef putenv
#undef setenv

/*
 * The structure below is used to keep track of all of the interpereters
 * for which we're managing the "env" array.  It's needed so that they
 * can all be updated whenever an environment variable is changed
 * anywhere.
 */

typedef struct EnvInterp {
    Tcl_Interp *interp;		/* Interpreter for which we're managing
				 * the env array. */
    struct EnvInterp *nextPtr;	/* Next in list of all such interpreters,
				 * or zero. */
} EnvInterp;

static EnvInterp *firstInterpPtr;
				/* First in list of all managed interpreters,
				 * or NULL if none. */

static int environSize = 0;	/* Non-zero means that the all of the
				 * environ-related information is malloc-ed
				 * and the environ array itself has this
				 * many total entries allocated to it (not
				 * all may be in use at once).  Zero means
				 * that the environment array is in its
				 * original static state. */

/*
 * Declarations for local procedures defined in this file:
 */

static void		EnvInit _ANSI_ARGS_((void));
static char *		EnvTraceProc _ANSI_ARGS_((ClientData clientData,
			    Tcl_Interp *interp, char *name1, char *name2,
			    int flags));
static int		FindVariable _ANSI_ARGS_((CONST char *name,
			    int *lengthPtr));
void			TclSetEnv _ANSI_ARGS_((CONST char *name,
			    CONST char *value));
void			TclUnsetEnv _ANSI_ARGS_((CONST char *name));

/*
 *----------------------------------------------------------------------
 *
 * TclSetupEnv --
 *
 *	This procedure is invoked for an interpreter to make environment
 *	variables accessible from that interpreter via the "env"
 *	associative array.
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	The interpreter is added to a list of interpreters managed
 *	by us, so that its view of envariables can be kept consistent
 *	with the view in other interpreters.  If this is the first
 *	call to Tcl_SetupEnv, then additional initialization happens,
 *	such as copying the environment to dynamically-allocated space
 *	for ease of management.
 *
 *----------------------------------------------------------------------
 */

void
TclSetupEnv(interp)
    Tcl_Interp *interp;		/* Interpreter whose "env" array is to be
				 * managed. */
{
    EnvInterp *eiPtr;
    int i;

    /*
     * First, initialize our environment-related information, if
     * necessary.
     */

    if (environSize == 0) {
	EnvInit();
    }

    /*
     * Next, add the interpreter to the list of those that we manage.
     */

    eiPtr = (EnvInterp *) ckalloc(sizeof(EnvInterp));
    eiPtr->interp = interp;
    eiPtr->nextPtr = firstInterpPtr;
    firstInterpPtr = eiPtr;

    /*
     * Store the environment variable values into the interpreter's
     * "env" array, and arrange for us to be notified on future
     * writes and unsets to that array.
     */

    (void) Tcl_UnsetVar2(interp, "env", (char *) NULL, TCL_GLOBAL_ONLY);
    for (i = 0; ; i++) {
	char *p, *p2;

	p = environ[i];
	if (p == NULL) {
	    break;
	}
	for (p2 = p; *p2 != '='; p2++) {
	    /* Empty loop body. */
	}
	*p2 = 0;
	(void) Tcl_SetVar2(interp, "env", p, p2+1, TCL_GLOBAL_ONLY);
	*p2 = '=';
    }
    Tcl_TraceVar2(interp, "env", (char *) NULL,
	    TCL_GLOBAL_ONLY | TCL_TRACE_WRITES | TCL_TRACE_UNSETS,
	    EnvTraceProc, (ClientData) NULL);
}

/*
 *----------------------------------------------------------------------
 *
 * FindVariable --
 *
 *	Locate the entry in environ for a given name.
 *
 * Results:
 *	The return value is the index in environ of an entry with the
 *	name "name", or -1 if there is no such entry.   The integer at
 *	*lengthPtr is filled in with the length of name (if a matching
 *	entry is found) or the length of the environ array (if no matching
 *	entry is found).
 *
 * Side effects:
 *	None.
 *
 *----------------------------------------------------------------------
 */

static int
FindVariable(name, lengthPtr)
    CONST char *name;		/* Name of desired environment variable. */
    int *lengthPtr;		/* Used to return length of name (for
				 * successful searches) or number of non-NULL
				 * entries in environ (for unsuccessful
				 * searches). */
{
    int i;
    CONST register char *p1, *p2;

    for (i = 0, p1 = environ[i]; p1 != NULL; i++, p1 = environ[i]) {
	for (p2 = name; *p2 == *p1; p1++, p2++) {
	    /* NULL loop body. */
	}
	if ((*p1 == '=') && (*p2 == '\0')) {
	    *lengthPtr = p2-name;
	    return i;
	}
    }
    *lengthPtr = i;
    return -1;
}

/*
 *----------------------------------------------------------------------
 *
 * TclSetEnv --
 *
 *	Set an environment variable, replacing an existing value
 *	or creating a new variable if there doesn't exist a variable
 *	by the given name.  This procedure is intended to be a
 *	stand-in for the  UNIX "setenv" procedure so that applications
 *	using that procedure will interface properly to Tcl.  To make
 *	it a stand-in, the Makefile must define "TclSetEnv" to "setenv".
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	The environ array gets updated, as do all of the interpreters
 *	that we manage.
 *
 *----------------------------------------------------------------------
 */

void
TclSetEnv(name, value)
    CONST char *name;		/* Name of variable whose value is to be
				 * set. */
    CONST char *value;		/* New value for variable. */
{
    int index, length, nameLength;
    char *p;
    EnvInterp *eiPtr;

    if (environSize == 0) {
	EnvInit();
    }

    /*
     * Figure out where the entry is going to go.  If the name doesn't
     * already exist, enlarge the array if necessary to make room.  If
     * the name exists, free its old entry.
     */

    index = FindVariable(name, &length);
    if (index == -1) {
	if ((length+2) > environSize) {
	    char **newEnviron;

	    newEnviron = (char **) ckalloc((unsigned)
		    ((length+5) * sizeof(char *)));
	    memcpy((VOID *) newEnviron, (VOID *) environ,
		    length*sizeof(char *));
	    ckfree((char *) environ);
	    environ = newEnviron;
	    environSize = length+5;
	}
	index = length;
	environ[index+1] = NULL;
	nameLength = strlen(name);
    } else {
	/*
	 * Compare the new value to the existing value.  If they're
	 * the same then quit immediately (e.g. don't rewrite the
	 * value or propagate it to other interpreters).  Otherwise,
	 * when there are N interpreters there will be N! propagations
	 * of the same value among the interpreters.
	 */

	if (strcmp(value, environ[index]+length+1) == 0) {
	    return;
	}
	ckfree(environ[index]);
	nameLength = length;
    }

    /*
     * Create a new entry and enter it into the table.
     */

    p = (char *) ckalloc((unsigned) (nameLength + strlen(value) + 2));
    environ[index] = p;
    strcpy(p, name);
    p += nameLength;
    *p = '=';
    strcpy(p+1, value);

    /*
     * Update all of the interpreters.
     */

    for (eiPtr= firstInterpPtr; eiPtr != NULL; eiPtr = eiPtr->nextPtr) {
	(void) Tcl_SetVar2(eiPtr->interp, "env", (char *) name,
		p+1, TCL_GLOBAL_ONLY);
    }
}

/*
 *----------------------------------------------------------------------
 *
 * Tcl_PutEnv --
 *
 *	Set an environment variable.  Similar to setenv except that
 *	the information is passed in a single string of the form
 *	NAME=value, rather than as separate name strings.  This procedure
 *	is intended to be a stand-in for the  UNIX "putenv" procedure
 *	so that applications using that procedure will interface
 *	properly to Tcl.  To make it a stand-in, the Makefile will
 *	define "Tcl_PutEnv" to "putenv".
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	The environ array gets updated, as do all of the interpreters
 *	that we manage.
 *
 *----------------------------------------------------------------------
 */

int
Tcl_PutEnv(string)
    CONST char *string;		/* Info about environment variable in the
				 * form NAME=value. */
{
    int nameLength;
    char *name, *value;

    if (string == NULL) {
	return 0;
    }

    /*
     * Separate the string into name and value parts, then call
     * TclSetEnv to do all of the real work.
     */

    value = strchr(string, '=');
    if (value == NULL) {
	return 0;
    }
    nameLength = value - string;
    if (nameLength == 0) {
	return 0;
    }
    name = ckalloc((unsigned) nameLength+1);
    memcpy(name, string, nameLength);
    name[nameLength] = 0;
    TclSetEnv(name, value+1);
    ckfree(name);
    return 0;
}

/*
 *----------------------------------------------------------------------
 *
 * TclUnsetEnv --
 *
 *	Remove an environment variable, updating the "env" arrays
 *	in all interpreters managed by us.  This function is intended
 *	to replace the UNIX "unsetenv" function (but to do this the
 *	Makefile must be modified to redefine "TclUnsetEnv" to
 *	"unsetenv".
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	Interpreters are updated, as is environ.
 *
 *----------------------------------------------------------------------
 */

void
TclUnsetEnv(name)
    CONST char *name;			/* Name of variable to remove. */
{
    int index, dummy;
    char **envPtr;
    EnvInterp *eiPtr;

    if (environSize == 0) {
	EnvInit();
    }

    /*
     * Update the environ array.
     */

    index = FindVariable(name, &dummy);
    if (index == -1) {
	return;
    }
    ckfree(environ[index]);
    for (envPtr = environ+index+1; ; envPtr++) {
	envPtr[-1] = *envPtr;
	if (*envPtr == NULL) {
	    break;
       }
    }

    /*
     * Update all of the interpreters.
     */

    for (eiPtr = firstInterpPtr; eiPtr != NULL; eiPtr = eiPtr->nextPtr) {
	(void) Tcl_UnsetVar2(eiPtr->interp, "env", (char *) name,
		TCL_GLOBAL_ONLY);
    }
}

/*
 *----------------------------------------------------------------------
 *
 * EnvTraceProc --
 *
 *	This procedure is invoked whenever an environment variable
 *	is modified or deleted.  It propagates the change to the
 *	"environ" array and to any other interpreters for whom
 *	we're managing an "env" array.
 *
 * Results:
 *	Always returns NULL to indicate success.
 *
 * Side effects:
 *	Environment variable changes get propagated.  If the whole
 *	"env" array is deleted, then we stop managing things for
 *	this interpreter (usually this happens because the whole
 *	interpreter is being deleted).
 *
 *----------------------------------------------------------------------
 */

	/* ARGSUSED */
static char *
EnvTraceProc(clientData, interp, name1, name2, flags)
    ClientData clientData;	/* Not used. */
    Tcl_Interp *interp;		/* Interpreter whose "env" variable is
				 * being modified. */
    char *name1;		/* Better be "env". */
    char *name2;		/* Name of variable being modified, or
				 * NULL if whole array is being deleted. */
    int flags;			/* Indicates what's happening. */
{
    /*
     * First see if the whole "env" variable is being deleted.  If
     * so, just forget about this interpreter.
     */

    if (name2 == NULL) {
	register EnvInterp *eiPtr, *prevPtr;

	if ((flags & (TCL_TRACE_UNSETS|TCL_TRACE_DESTROYED))
		!= (TCL_TRACE_UNSETS|TCL_TRACE_DESTROYED)) {
	    panic("EnvTraceProc called with confusing arguments");
	}
	eiPtr = firstInterpPtr;
	if (eiPtr->interp == interp) {
	    firstInterpPtr = eiPtr->nextPtr;
	} else {
	    for (prevPtr = eiPtr, eiPtr = eiPtr->nextPtr; ;
		    prevPtr = eiPtr, eiPtr = eiPtr->nextPtr) {
		if (eiPtr == NULL) {
		    panic("EnvTraceProc couldn't find interpreter");
		}
		if (eiPtr->interp == interp) {
		    prevPtr->nextPtr = eiPtr->nextPtr;
		    break;
		}
	    }
	}
	ckfree((char *) eiPtr);
	return NULL;
    }

    /*
     * If a value is being set, call TclSetEnv to do all of the work.
     */

    if (flags & TCL_TRACE_WRITES) {
	TclSetEnv(name2, Tcl_GetVar2(interp, "env", name2, TCL_GLOBAL_ONLY));
    }

    if (flags & TCL_TRACE_UNSETS) {
	TclUnsetEnv(name2);
    }
    return NULL;
}

/*
 *----------------------------------------------------------------------
 *
 * EnvInit --
 *
 *	This procedure is called to initialize our management
 *	of the environ array.
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	Environ gets copied to malloc-ed storage, so that in
 *	the future we don't have to worry about which entries
 *	are malloc-ed and which are static.
 *
 *----------------------------------------------------------------------
 */

static void
EnvInit()
{
    char **newEnviron;
    int i, length;

    if (environSize != 0) {
	return;
    }
    for (length = 0; environ[length] != NULL; length++) {
	/* Empty loop body. */
    }
    environSize = length+5;
    newEnviron = (char **) ckalloc((unsigned)
		(environSize * sizeof(char *)));
    for (i = 0; i < length; i++) {
	newEnviron[i] = (char *) ckalloc((unsigned) (strlen(environ[i]) + 1));
	strcpy(newEnviron[i], environ[i]);
    }
    newEnviron[length] = NULL;
    environ = newEnviron;
}