overlay/Documentation/nas-new-kernel.eclass
2012-10-25 17:22:20 +02:00

864 lines
29 KiB
Bash

# Copyright 2004-2010 Sabayon Project
# Distributed under the terms of the GNU General Public License v2
# $
# @ECLASS-VARIABLE: K_NASPATCHES_VER
# @DESCRIPTION:
# The version of the sablink patches tarball(s) to apply.
# A value of "5" would apply 2.6.12-5 to my-sources-2.6.12.ebuild
# @ECLASS-VARIABLE: K_NASKERNEL_NAME
# @DESCRIPTION:
# The kernel name used by the ebuild, it should be the ending ${PN} part
# for example, of linux-sablink it is "${PN/${PN/-*}-}" (sablink)
K_NASKERNEL_NAME="${K_NASKERNEL_NAME:-${PN/${PN/-*}-}}"
# @ECLASS-VARIABLE: K_NASKERNEL_URI_CONFIG
# @DESCRIPTION:
# Set this either to "no" or "yes" depending on the location of the
# kernel config files. If they are inside FILESDIR (old location)
# leave this option set to "no", otherwise set this to "yes"
K_NASKERNEL_URI_CONFIG="${K_NASKERNEL_URI_CONFIG:-no}"
# @ECLASS-VARIABLE: K_NASKERNEL_SELF_TARBALL_NAME
# @DESCRIPTION:
# If the main kernel sources tarball is generated in-house and available
# on the "sablink" mirror, set this variable to the extension name (see example
# below). This will disable ALL the extra/local patches (since they have to
# be applied inside the tarball). Moreover, K_NASKERNEL_URI_CONFIG,
# K_NASPATCHES_VER, K_NASKERNEL_NAME, K_KERNEL_PATCH_VER will be ignored.
# Example:
# K_NASKERNEL_SELF_TARBALL_NAME="sablink"
# This would generate:
# SRC_URI="mirror://sablink/sys-kernel/linux-${PV}+sablink.tar.bz2"
K_NASKERNEL_SELF_TARBALL_NAME="${K_NASKERNEL_SELF_TARBALL_NAME:-}"
# @ECLASS-VARIABLE: K_NASKERNEL_FORCE_SUBLEVEL
# @DESCRIPTION:
# Force the rewrite of SUBLEVEL in kernel sources Makefile
K_NASKERNEL_FORCE_SUBLEVEL="${K_NASKERNEL_FORCE_SUBLEVEL:-}"
# @ECLASS-VARIABLE: K_NASKERNEL_RESET_EXTRAVERSION
# @DESCRIPTION:
# Force the rewrite of EXTRAVERSION in kernel sources Makefile (setting it to "")
K_NASKERNEL_RESET_EXTRAVERSION="${K_NASKERNEL_RESET_EXTRAVERSION:-}"
# @ECLASS-VARIABLE: K_NASKERNEL_LONGTERM
# @DESCRIPTION:
# Consider Kernel stable patchset as longterm (changing URL)
K_NASKERNEL_LONGTERM="${K_NASKERNEL_LONGTERM:-}"
# @ECLASS-VARIABLE: K_KERNEL_SOURCES_PKG
# @DESCRIPTION:
# The kernel sources package used to build this kernel binary
K_KERNEL_SOURCES_PKG="${K_KERNEL_SOURCES_PKG:-${CATEGORY}/${PN/*-}-sources-${PVR}}"
# @ECLASS-VARIABLE: K_KERNEL_PATCH_VER
# @DESCRIPTION:
# If set to "3" for example, it applies the upstream kernel
# patch corresponding to patch-${KV_MAJOR}.${KV_MINOR}.${KV_PATCH}.3.bz2
# @TODO: deprecate and remove once 2.6.x kernels are retired
K_KERNEL_PATCH_VER="${K_KERNEL_PATCH_VER:-}"
# @ECLASS-VARIABLE: K_KERNEL_PATCH_HOTFIXES
# @DESCRIPTION:
# If there is the need to quickly apply patches to the kernel
# without bumping the kernel patch tarball (for eg. in case
# of just released security fixes), set this variable in your ebuild
# pointing to space separated list of patch paths.
K_KERNEL_PATCH_HOTFIXES="${K_KERNEL_PATCH_HOTFIXES:-}"
# @ECLASS-VARIABLE: K_KERNEL_DISABLE_PR_EXTRAVERSION
# @DESCRIPTION:
# Set this to "1" if you want to tell kernel-2 eclass to
# not use ${PR} in kernel EXTRAVERSION (K_NOUSEPR). Otherwise, set
# this to "0" to not set K_NOUSEPR at all.
K_KERNEL_DISABLE_PR_EXTRAVERSION="${K_KERNEL_DISABLE_PR_EXTRAVERSION:-1}"
# @ECLASS-VARIABLE: K_KERNEL_SLOT_USEPVR
# @DESCRIPTION:
# Set this to "1" if you want to use ${PVR} in SLOT variable, instead of ${PV}
# sys-kernel/linux-vserver (vserver-sources) require this. This won't work for
# firmware pkgs.
K_KERNEL_SLOT_USEPVR="${K_KERNEL_SLOT_USEPVR:-0}"
# @ECLASS-VARIABLE: K_NASKERNEL_FIRMWARE
# @DESCRIPTION:
# Set this to "1" if your ebuild is a kernel firmware package
K_FIRMWARE_PACKAGE="${K_FIRMWARE_PACKAGE:-}"
# @ECLASS-VARIABLE: K_ONLY_SOURCES
# @DESCRIPTION:
# For every kernel binary package, there is a kernel source package associated
# if your ebuild is one of them, set this to "1"
K_ONLY_SOURCES="${K_ONLY_SOURCES:-}"
# @ECLASS-VARIABLE: K_REQUIRED_LINUX_FIRMWARE_VER
# @DESCRIPTION:
# Minimum required version of sys-kernel/linux-formware package, if any
K_REQUIRED_LINUX_FIRMWARE_VER="${K_REQUIRED_LINUX_FIRMWARE_VER:-}"
# @ECLASS-VARIABLE: K_WORKAROUND_SOURCES_COLLISION
# @DESCRIPTION:
# For kernel binary packages, Workaround file collisions with kernel
# sources already providing certain files (like Makefile). Used
# by linux-openvz and linux-vserver
K_WORKAROUND_SOURCES_COLLISION="${K_WORKAROUND_SOURCES_COLLISION:-}"
# @ECLASS-VARIABLE: K_WORKAROUND_USE_REAL_EXTRAVERSION
# @DESCRIPTION:
# Some kernel sources are shipped with their own EXTRAVERSION and
# we're kindly asked to not touch it, if this is your case, set
# this variable and depmod will work correctly.
K_WORKAROUND_USE_REAL_EXTRAVERSION="${K_WORKAROUND_USE_REAL_EXTRAVERSION:-}"
# @ECLASS-VARIABLE: K_GENKERNEL_ARGS
# @DESCRIPTION:
# Provide extra genkernel arguments using K_GENKERNEL_ARGS
K_GENKERNEL_ARGS="${K_GENKERNEL_ARGS:-}"
# @ECLASS-VARIABLE: K_MKIMAGE_RAMDISK_ADDRESS
# @DESCRIPTION:
# [ARM ONLY] Provide the ramdisk load address to be used with mkimage
K_MKIMAGE_RAMDISK_ADDRESS="${K_MKIMAGE_RAMDISK_ADDRESS:-}"
# @ECLASS-VARIABLE: K_MKIMAGE_RAMDISK_ENTRYPOINT
# @DESCRIPTION:
# [ARM ONLY] Provide the ramdisk entry point address to be used with mkimage
K_MKIMAGE_RAMDISK_ENTRYPOINT="${K_MKIMAGE_RAMDISK_ENTRYPOINT:-}"
KERN_INITRAMFS_SEARCH_NAME="${KERN_INITRAMFS_SEARCH_NAME:-initramfs-genkernel*${K_NASKERNEL_NAME}}"
# Disable deblobbing feature
K_DEBLOB_AVAILABLE=0
ETYPE="sources"
inherit eutils kernel-2 mount-boot linux-info
# from kernel-2 eclass
detect_version
detect_arch
DESCRIPTION="Sablink Linux kernel functions and phases"
K_LONGTERM_URL_STR=""
if [ -n "${K_NASKERNEL_LONGTERM}" ]; then
K_LONGTERM_URL_STR="/longterm/v${KV_MAJOR}.${KV_MINOR}.${KV_PATCH}"
fi
## kernel-2 eclass settings
if [ -n "${K_NASKERNEL_SELF_TARBALL_NAME}" ]; then
SRC_URI="mirror://sablink/${CATEGORY}/linux-${PVR}+${K_NASKERNEL_SELF_TARBALL_NAME}.tar.bz2"
elif [ -n "${K_NASPATCHES_VER}" ]; then
UNIPATCH_STRICTORDER="yes"
K_NASPATCHES_PKG="nas-patches-${PV}-${K_NASPATCHES_VER}.tar.bz2"
UNIPATCH_LIST="${DISTFILES}/${K_NASPATCHES_PKG}"
SRC_URI="${KERNEL_URI}
mirror://sablink/${CATEGORY}/linux-nas-patches/${K_NASPATCHES_PKG}"
else
SRC_URI="${KERNEL_URI}"
fi
if [ -z "${K_NASKERNEL_SELF_TARBALL_NAME}" ]; then
if [ -n "${K_KERNEL_PATCH_VER}" ]; then
K_PATCH_NAME="patch-${KV_MAJOR}.${KV_MINOR}.${KV_PATCH}.${K_KERNEL_PATCH_VER}.bz2"
SRC_URI="${SRC_URI}
mirror://kernel/linux/kernel/v${KV_MAJOR}.${KV_MINOR}${K_LONGTERM_URL_STR}/${K_PATCH_NAME}"
UNIPATCH_LIST="${DISTDIR}/${K_PATCH_NAME}
${UNIPATCH_LIST}"
fi
fi
if [ -n "${K_KERNEL_PATCH_HOTFIXES}" ]; then
UNIPATCH_LIST="${K_KERNEL_PATCH_HOTFIXES} ${UNIPATCH_LIST}"
fi
_get_real_kv_full() {
if [[ "${KV_MAJOR}${KV_MINOR}" -eq 26 ]]; then
echo "${ORIGINAL_KV_FULL}"
elif [[ "${OKV/.*}" = "3" ]]; then
# Linux 3.x support, KV_FULL is set to: 3.0-sablink
# need to add another final .0 to the version part
#echo "${ORIGINAL_KV_FULL/-/.0-}"
echo "${ORIGINAL_KV_FULL}"
else
echo "${ORIGINAL_KV_FULL}"
fi
}
# replace "linux" with K_NASKERNEL_NAME, usually replaces
# "linux" with "sablink" or "server" or "openvz"
KV_FULL="${KV_FULL/${PN/-*}/${K_NASKERNEL_NAME}}"
EXTRAVERSION="${EXTRAVERSION/${PN/-*}/${K_NASKERNEL_NAME}}"
# drop -rX if exists
if [[ -n "${PR//r0}" ]] && [[ "${K_KERNEL_DISABLE_PR_EXTRAVERSION}" = "1" ]] \
&& [[ -z "${K_NOSETEXTRAVERSION}" ]]; then
EXTRAVERSION="${EXTRAVERSION%-r*}"
KV_FULL="${KV_FULL%-r*}"
KV="${KV%-r*}"
fi
# rewrite it
ORIGINAL_KV_FULL="${KV_FULL}"
KV_FULL="$(_get_real_kv_full)"
# Starting from linux-3.0, we still have to install
# sources stuff into /usr/src/linux-3.0.0-sablink (example)
# where the last part must always match uname -r
# otherwise kernel-switcher (and RELEASE_LEVEL file)
# will complain badly
KV_OUT_DIR="/usr/src/linux-${KV_FULL}"
S="${WORKDIR}/linux-${KV_FULL}"
if [ -n "${K_FIRMWARE_PACKAGE}" ]; then
SLOT="0"
elif [ "${K_KERNEL_SLOT_USEPVR}" = "1" ]; then
SLOT="${PVR}"
else
SLOT="${PV}"
fi
_is_kernel_binary() {
if [ -z "${K_ONLY_SOURCES}" ] && [ -z "${K_FIRMWARE_PACKAGE}" ]; then
# yes it is
return 0
else
# no it isn't
return 1
fi
}
# provide extra virtual pkg
if _is_kernel_binary; then
PROVIDE="${PROVIDE} virtual/linux-binary"
fi
if [ -n "${K_NASKERNEL_SELF_TARBALL_NAME}" ]; then
HOMEPAGE="http://gitweb.sablink.org/?p=linux/kernel/sablink.git;a=summary"
else
HOMEPAGE="http://www.sablink.org"
fi
# Setup kernel configuration file name
if [ -z "${K_NASKERNEL_SELF_TARBALL_NAME}" ]; then
if [ "${K_NASKERNEL_URI_CONFIG}" = "yes" ]; then
tmp_K_NASKERNEL_CONFIG_FILE="${K_NASKERNEL_CONFIG_FILE:-${K_NASKERNEL_NAME}-${PVR}-__ARCH__.config}"
tmp_K_NASKERNEL_FW_CONFIG_FILE="${K_NASKERNEL_FW_CONFIG_FILE:-${K_NASKERNEL_NAME}-fw_env-__ARCH__.config}"
SRC_URI="${SRC_URI}
arm? ( mirror://sablink/${CATEGORY}/linux-nas-patches/config/${tmp_K_NASKERNEL_CONFIG_FILE/__ARCH__/arm}
mirror://sablink/${CATEGORY}/linux-nas-patches/config/${tmp_K_NASKERNEL_FW_CONFIG_FILE/__ARCH__/arm} )"
# K_SABKERNEL_CONFIG_FILE will be set in _set_config_file_vars
unset tmp_K_SABKERNEL_CONFIG_FILE
# Returns success if _set_config_file_vars was called.
_is_config_file_set() {
[[ ${_config_file_set} = 1 ]]
}
_set_config_file_vars() {
# Setup kernel configuration file name
if [ -z "${K_SABKERNEL_SELF_TARBALL_NAME}" ]; then
if [ "${K_SABKERNEL_URI_CONFIG}" = "yes" ]; then
K_NASKERNEL_CONFIG_FILE="${K_NASKERNEL_CONFIG_FILE:-${K_NASKERNEL_NAME}-${PVR}-__ARCH__.config}"
K_NASKERNEL_FW_CONFIG_FILE="${K_NASKERNEL_FW_CONFIG_FILE:-${K_NASKERNEL_NAME}-fw_env-__ARCH__.config}"
use arm && K_NASKERNEL_CONFIG_FILE=${K_NASKERNEL_CONFIG_FILE/__ARCH__/arm}
use arm && K_NASKERNEL_FW_CONFIG_FILE=${K_NASKERNEL_FW_CONFIG_FILE/__ARCH__/arm}
# ARM not supported, if put in SRC_URI it tries to fetch it
else
use arm && K_NASKERNEL_CONFIG_FILE="${K_NASKERNEL_CONFIG_FILE:-${K_NASKERNEL_NAME}-${PVR}-arm.config}"
use arm && K_NASKERNEL_FW_CONFIG_FILE="${K_NASKERNEL_FW_CONFIG_FILE:-${K_NASKERNEL_NAME}-fw_env-arm.config}"
fi
else
K_NASKERNEL_CONFIG_FILE="${K_NASKERNEL_CONFIG_FILE:-${K_NASKERNEL_NAME}-${PVR}-__ARCH__.config}"
K_NASKERNEL_ALT_CONFIG_FILE="${K_NASKERNEL_ALT_CONFIG_FILE:-${K_NASKERNEL_NAME}-${PV}-__ARCH__.config}"
K_NASKERNEL_FW_CONFIG_FILE="${K_NASKERNEL_FW_CONFIG_FILE:-${K_NASKERNEL_NAME}-fw_env-__ARCH__.config}"
if use arm; then
K_NASKERNEL_CONFIG_FILE=${K_NASKERNEL_CONFIG_FILE/__ARCH__/arm}
K_NASKERNEL_ALT_CONFIG_FILE=${K_NASKERNEL_ALT_CONFIG_FILE/__ARCH__/arm}
K_NASKERNEL_FW_CONFIG_FILE=${K_NASKERNEL_FW_CONFIG_FILE/__ARCH__/arm}
fi
_config_file_set=1
fi
if [ -n "${K_ONLY_SOURCES}" ] || [ -n "${K_FIRMWARE_PACKAGE}" ]; then
IUSE="${IUSE}"
DEPEND="sys-apps/sed"
RDEPEND="${RDEPEND}"
else
IUSE="dmraid dracut iscsi lvm mdadm ccache"
DEPEND="app-arch/xz-utils
sys-apps/sed
sys-devel/make
>=sys-kernel/genkernel-3.4.16-r1
dracut? ( sys-kernel/dracut )
ccache? ( dev-util/ccache )
sys-block/devio
dev-embedded/u-boot-tools
sys-fs/dosfstools"
RDEPEND="sys-apps/sed
sys-kernel/linux-firmware"
if [ -n "${K_REQUIRED_LINUX_FIRMWARE_VER}" ]; then
RDEPEND+=" >=sys-kernel/linux-firmware-${K_REQUIRED_LINUX_FIRMWARE_VER}"
fi
fi
# internal function
#
# FUNCTION: _update_depmod
# @USAGE: _update_depmod <-r depmod>
# DESCRIPTION:
# It updates the modules.dep file for the current kernel.
# This is more or less the same of linux-mod update_depmod, with the
# exception of accepting parameter which is passed to depmod -r switch
_update_depmod() {
# if we haven't determined the version yet, we need too.
get_version;
ebegin "Updating module dependencies for ${KV_FULL}"
if [ -r "${KV_OUT_DIR}"/System.map ]; then
depmod -ae -F "${KV_OUT_DIR}"/System.map -b "${ROOT}" -r "${1}"
eend $?
else
ewarn
ewarn "${KV_OUT_DIR}/System.map not found."
ewarn "You must manually update the kernel module dependencies using depmod."
eend 1
ewarn
fi
}
nas-kernel_pkg_setup() {
if [ -n "${K_FIRMWARE_PACKAGE}" ]; then
einfo "Preparing kernel firmwares"
else
einfo "Preparing kernel and its modules"
fi
}
nas-kernel_src_unpack() {
local okv="${OKV}"
if [ -n "${K_NASKERNEL_SELF_TARBALL_NAME}" ]; then
OKV="${PVR}+${K_NASKERNEL_SELF_TARBALL_NAME}"
fi
kernel-2_src_unpack
if [ -n "${K_NASKERNEL_FORCE_SUBLEVEL}" ]; then
# patch out Makefile with proper sublevel
sed -i "s:^SUBLEVEL = .*:SUBLEVEL = ${K_NASKERNEL_FORCE_SUBLEVEL}:" \
"${S}/Makefile" || die
fi
if [ -n "${K_NASKERNEL_RESET_EXTRAVERSION}" ]; then
sed -i "s:^EXTRAVERSION =.*:EXTRAVERSION = :" "${S}/Makefile" || die
# some sources could have multiple append-based EXTRAVERSIONs
sed -i "s/^EXTRAVERSION :=.*//" "${S}/Makefile" || die
fi
OKV="${okv}"
# Let's handle EAPIs 0 and 1...
case ${EAPI:-0} in
0|1) nas-kernel_src_prepare ;;
esac
}
nas-kernel_src_prepare() {
_set_config_file_vars
}
nas-kernel_src_compile() {
if [ -n "${K_FIRMWARE_PACKAGE}" ]; then
_firmwares_src_compile
elif [ -n "${K_ONLY_SOURCES}" ]; then
kernel-2_src_compile
else
_kernel_src_compile
fi
}
_firmwares_src_compile() {
einfo "Starting to compile firmwares..."
_kernel_copy_config "${S}/.config"
cd "${S}" || die "cannot find source dir"
export LDFLAGS=""
OLDARCH="${ARCH}"
unset ARCH
emake firmware || die "cannot compile firmwares"
ARCH="${OLDARCH}"
}
_kernel_copy_config() {
_is_config_file_set \
|| die "Kernel configuration file not set. Was nas-kernel_src_prepare() called?"
if [ -n "${K_NASKERNEL_SELF_TARBALL_NAME}" ]; then
local base_path="${S}/sablink/config"
if [ -f "${base_path}/${K_NASKERNEL_ALT_CONFIG_FILE}" ]; then
# new path, without revision
cp "${base_path}/${K_NASKERNEL_ALT_CONFIG_FILE}" "${1}" || die "cannot copy kernel config"
else
# PVR path (old)
cp "${base_path}/${K_NASKERNEL_CONFIG_FILE}" "${1}" || die "cannot copy kernel config"
fi
else
if [ "${K_NASKERNEL_URI_CONFIG}" = "no" ]; then
cp "${FILESDIR}/${PF/-r0/}-${ARCH}.config" "${1}" || die "cannot copy kernel config"
else
cp "${DISTDIR}/${K_NASKERNEL_CONFIG_FILE}" "${1}" || die "cannot copy kernel config"
fi
fi
}
_kernel_src_compile() {
# disable sandbox
export SANDBOX_ON=0
# needed anyway, even if grub use flag is not used here
if use arm ; then
mkdir -p "${WORKDIR}"/boot/dtb
else
mkdir -p "${WORKDIR}"/boot
fi
einfo "Starting to compile kernel..."
_kernel_copy_config "${WORKDIR}"/config
# do some cleanup
rm -rf "${WORKDIR}"/lib
rm -rf "${WORKDIR}"/cache
rm -rf "${S}"/temp
# creating workdirs
# some kernels fail with make 3.82 if firmware dir is not created
mkdir "${WORKDIR}"/lib/lib/firmware -p
mkdir "${WORKDIR}"/cache
mkdir "${S}"/temp
cd "${S}" || die
GKARGS="--no-save-config --disklabel"
use dracut && GKARGS="${GKARGS} --dracut"
use dmraid && GKARGS="${GKARGS} --dmraid"
use iscsi && GKARGS="${GKARGS} --iscsi"
use mdadm && GKARGS="${GKARGS} --mdadm"
use lvm && GKARGS="${GKARGS} --lvm"
export DEFAULT_KERNEL_SOURCE="${S}"
export CMD_KERNEL_DIR="${S}"
for opt in ${MAKEOPTS}; do
if [ "${opt:0:2}" = "-j" ]; then
mkopts="${opt}"
break
fi
done
[ -z "${mkopts}" ] && mkopts="-j3"
OLDARCH="${ARCH}"
env_setup_xmakeopts
[ -n "${xmakeopts}" ] && eval "${xmakeopts}"
if [ -n "${CROSS_COMPILE}" ] && [ "${CBUILD:-${CHOST}}" != "${CTARGET}" ]; then
einfo "Enabling cross-emerge for ${CROSS_COMPILE}, arch: ${KARCH}"
GKARGS="${GKARGS} --arch-override=${KARCH}"
GKARGS="${GKARGS} --kernel-cross-compile=${CROSS_COMPILE}"
GKARGS="${GKARGS} --utils-cross-compile=${CROSS_COMPILE}"
# ARCH= must be forced to KARCH
ARCH="${KARCH}"
else
einfo "Cross-emerge is disabled"
unset CROSS_COMPILE
unset ARCH
use ccache && GKARGS="${GKARGS} --kernel-cc=/usr/lib/ccache/bin/gcc"
fi
# If ARM, build the uImage directly
#if use arm; then
# K_GENKERNEL_ARGS+=" --kernel-target=uImage --kernel-binary=arch/arm/boot/uImage"
#fi
# Workaround bug in splash_geninitramfs corrupting the initramfs
# if xz compression is used (newer genkernel >3.4.24)
local support_comp=$(genkernel --help | grep compress-initramfs-type)
if [ -n "${support_comp}" ]; then
GKARGS+=" --compress-initramfs-type=gzip"
fi
K_NASKERNEL_DTB="none"
# Buffalo anounced a new box named Pro Live (video transcode streaming)
# so the old ls_pro_live has to be split to ls_pro ls_live
# for now let it stay but a move schould be done to ls_pro
if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_chl" ]; then
devio > foo 'wl 0xe3a01c0B,4' 'wl 0xe3811061,4' # Linkstation Live V3 (2.6.34)
K_NASKERNEL_TYPE="buffalo"
K_NASKERNEL_DEVICE="Buffalo Linkstation LiveV3 (LS-CHL)"
fi
if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_chl2" ]; then
#devio > foo 'wl 0xe3a01c0a,4' 'wl 0xe3811067,4' # Linkstation XHL/CHLv2 (2.6.30)
# new Device tree no need for devio
K_NASKERNEL_DTB="kirkwood-lschlv2.dtb"
K_NASKERNEL_TYPE="buffalo"
K_NASKERNEL_DEVICE="Buffalo LS-XHL Series"
fi
if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_hgl" ]; then
devio > foo 'wl 0xe3a01c07,4' 'wl 0xe38110d5,4' # Linkstation HGL (2.6.31)
K_NASKERNEL_TYPE="buffalo"
K_NASKERNEL_DEVICE="Buffalo Linkstation LS-HGL"
fi
if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_live" ]; then
devio > foo 'wl 0xe3a01c06,4' 'wl 0xe3811031,4' # Linkstation Pro/Live (2.6.26)
K_NASKERNEL_TYPE="buffalo"
K_NASKERNEL_DEVICE="Buffalo Linkstation Pro/Live"
fi
if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_mini" ]; then
devio > foo 'wl 0xe3a01c07,4' 'wl 0xe3811042,4' # Linkstation mini (2.6.29)
K_NASKERNEL_TYPE="buffalo"
K_NASKERNEL_DEVICE="Buffalo Linkstation Mini"
fi
if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_pro" ]; then
devio > foo 'wl 0xe3a01c06,4' 'wl 0xe3811031,4' # Linkstation Pro/Live (2.6.26)
K_NASKERNEL_TYPE="buffalo"
K_NASKERNEL_DEVICE="Buffalo Linkstation Pro/Live"
fi
if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_pro_duo_rev1" ]; then
devio > foo 'wl 0xe3a01c07,4' 'wl 0xe3811027,4' # Linkstation Pro Duo (2.6.30)
K_NASKERNEL_TYPE="buffalo"
K_NASKERNEL_DEVICE="Buffalo Linkstation Pro Duo - Revision 1"
fi
if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_pro_duo_rev2" ]; then
devio > foo 'wl 0xe3a01c07,4' 'wl 0xe3811027,4' # Linkstation Pro Duo (2.6.30)
K_NASKERNEL_TYPE="buffalo"
K_NASKERNEL_DEVICE="Buffalo Linkstation Pro Duo - Revision 2"
fi
if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_vl" ]; then
devio > foo 'wl 0xe3a01c0d,4' 'wl 0xe381100a,4' # Linkstation vl (2.6.35)
K_NASKERNEL_TYPE="buffalo"
K_NASKERNEL_DEVICE="Buffalo LS-VL Series"
fi
if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_wxl" ]; then
devio > foo 'wl 0xe3a01c0b,4' 'wl 0xe38110c4,4' # Linkstation WXL (2.6.35)
K_NASKERNEL_TYPE="buffalo"
# Broken hardware name needs to be correct in u-boot firmware
K_NASKERNEL_DEVICE="Buffalo Linkstation Pro/Live"
fi
if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_xhl" ]; then
#devio > foo 'wl 0xe3a01c0a,4' 'wl 0xe3811067,4' # Linkstation XHL/CHLv2 (2.6.30)
# new Device tree no need for devio
K_NASKERNEL_DTB="kirkwood-lsxhl.dtb"
K_NASKERNEL_TYPE="buffalo"
K_NASKERNEL_DEVICE="Buffalo LS-XHL Series"
fi
# Freescale
if [ "${K_NASKERNEL_NAME}" = "freescale_mx53_loco" ]; then
K_NASKERNEL_TYPE="default"
K_NASKERNEL_DEVICE="Freescale MX53 LOCO Board"
K_GENKERNEL_ARGS+=" --kernel-target=uImage --kernel-binary=arch/arm/boot/uImage"
fi
unset LDFLAGS
DEFAULT_KERNEL_SOURCE="${S}" CMD_KERNEL_DIR="${S}" genkernel ${GKARGS} ${K_GENKERNEL_ARGS} \
--kerneldir="${S}" \
--kernel-config="${WORKDIR}"/config \
--cachedir="${WORKDIR}"/cache \
--makeopts="${mkopts}" \
--tempdir="${S}"/temp \
--logfile="${WORKDIR}"/genkernel.log \
--bootdir="${WORKDIR}"/boot \
--mountboot \
--module-prefix="${WORKDIR}"/lib \
all || die "genkernel failed"
ARCH=${OLDARCH}
# Buffalo Boxes have a special naming and start address
if [ "${K_NASKERNEL_TYPE}" = "buffalo" ]; then
if [ "${K_NASKERNEL_DTB}" = "none" ]; then
einfo "Prepend the correct Device ID to the Kenel Image"
cat foo "${WORKDIR}"/boot/kernel-genkernel-${ARCH}-${KV_FULL} > zImage.new
else
einfo "Append the device-tree-blob to the Kenel Image"
cat "${WORKDIR}"/boot/kernel-genkernel-${ARCH}-${KV_FULL} "${S}"/arch/arm/boot/${K_NASKERNEL_DTB} > zImage.new
fi
einfo "Create uImage of the resulting Image"
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n uImage-${KV_FULL} \
-d zImage.new "${WORKDIR}"/boot/uImage-genkernel-${ARCH}-${KV_FULL}.buffalo
einfo "Create uInitrd with correct start address"
mkimage -A arm -O linux -T ramdisk -C none -a 0x00000000 -e 0x00000000 -n initrd-${KV_FULL} \
-d "${WORKDIR}"/boot/initramfs-genkernel-${ARCH}-${KV_FULL} "${WORKDIR}"/boot/initrd-genkernel-${ARCH}-${KV_FULL}.buffalo
fi
# # Default uImage and uInit handling
# if [ "${K_NASKERNEL_TYPE}" = "default" ]; then
# cp "${WORKDIR}"/boot/kernel-genkernel-${ARCH}-${KV_FULL} "${WORKDIR}"/boot/uImage-genkernel-${ARCH}-${KV_FULL}
# mkimage -A arm -O linux -T ramdisk -C none -a 0x00000000 -e 0x00000000 -n initrd-${KV_FULL} \
# -d "${WORKDIR}"/boot/initramfs-genkernel-${ARCH}-${KV_FULL} "${WORKDIR}"/boot/uInitrd-genkernel-${ARCH}-${KV_FULL}
# fi
# cleanup
rm foo zImage.new
rm "${WORKDIR}"/boot/kernel-genkernel-${ARCH}-${KV_FULL} "${WORKDIR}"/boot/initramfs-genkernel-${ARCH}-${KV_FULL}
}
_setup_mkimage_ramdisk() {
local initramfs=$(ls "${WORKDIR}"/boot/${KERN_INITRAMFS_SEARCH_NAME}* 2> /dev/null)
if [ ! -e "${initramfs}" ] || [ ! -f "${initramfs}" ]; then
ewarn "No initramfs at ${initramfs}, cannot run mkimage on it!"
else
einfo "Setting up u-boot initramfs for: ${initramfs}"
/usr/bin/mkimage -A arm -O linux -T ramdisk -C none -a "${K_MKIMAGE_RAMDISK_ADDRESS}" \
-e "${K_MKIMAGE_RAMDISK_ENTRYPOINT}" -d "${initramfs}" \
"${initramfs}.u-boot" || return 1
mv "${initramfs}.u-boot" "${initramfs}" || return 1
fi
return 0
}
nas-kernel_src_install() {
if [ -n "${K_FIRMWARE_PACKAGE}" ]; then
_firmwares_src_install
elif [ -n "${K_ONLY_SOURCES}" ]; then
_kernel_sources_src_install
else
_kernel_src_install
fi
}
_firmwares_src_install() {
dodir /lib/firmware
keepdir /lib/firmware
cd "${S}" || die
emake INSTALL_FW_PATH="${D}/lib/firmware" firmware_install || die "cannot install firmwares"
}
_kernel_sources_src_install() {
local version_h_name="${KV_OUT_DIR/\//}/include/linux"
local version_h="${ROOT}${version_h_name}"
if [ -f "${version_h}" ]; then
einfo "Discarding previously installed version.h to avoid collisions"
addwrite "/${version_h_name}"
rm -f "${version_h}"
fi
_kernel_copy_config ".config"
kernel-2_src_install
cd "${D}${KV_OUT_DIR}" || die
local oldarch="${ARCH}"
unset ARCH
if ! use sources_standalone; then
make modules_prepare || die "failed to run modules_prepare"
rm .config || die "cannot remove .config"
rm Makefile || die "cannot remove Makefile"
rm include/linux/version.h || die "cannot remove include/linux/version.h"
fi
ARCH="${oldarch}"
}
_kernel_src_install() {
use arm && { _setup_mkimage_ramdisk || die "cannot setup mkimage"; }
dodir "${KV_OUT_DIR}"
insinto "${KV_OUT_DIR}"
_kernel_copy_config ".config"
doins ".config" || die "cannot copy kernel config"
doins Makefile || die "cannot copy Makefile"
doins Module.symvers || die "cannot copy Module.symvers"
doins System.map || die "cannot copy System.map"
# NOTE: this is a workaround caused by linux-info.eclass not
# being ported to EAPI=2 yet
local version_h_name="${KV_OUT_DIR/\//}/include/linux"
local version_h="${ROOT}${version_h_name}/version.h"
if [ -f "${version_h}" ]; then
einfo "Discarding previously installed version.h to avoid collisions"
addwrite "${version_h}"
rm -f "${version_h}"
fi
# Include include/linux/version.h to make Portage happy
dodir "${KV_OUT_DIR}/include/linux"
insinto "${KV_OUT_DIR}/include/linux"
doins "${S}/include/linux/version.h" || die "cannot copy version.h"
insinto "/boot"
doins "${WORKDIR}"/boot/* || die "cannot copy /boot over"
cp -Rp "${WORKDIR}"/lib/* "${D}/" || die "cannot copy /lib over"
# This doesn't always work because KV_FULL (when K_NOSETEXTRAVERSION=1) doesn't
# reflect the real value used in Makefile
#dosym "../../..${KV_OUT_DIR}" "/lib/modules/${KV_FULL}/source" || die "cannot install source symlink"
#dosym "../../..${KV_OUT_DIR}" "/lib/modules/${KV_FULL}/build" || die "cannot install build symlink"
cd "${D}"/lib/modules/* || die "cannot enter /lib/modules directory, more than one element?"
# cleanup previous
rm -f build source || die
# create sane symlinks
ln -sf "../../..${KV_OUT_DIR}" source || die "cannot create source symlink"
ln -sf "../../..${KV_OUT_DIR}" build || die "cannot create build symlink"
cd "${S}" || die
# drop ${D}/lib/firmware, virtual/linux-firmwares provides it
rm -rf "${D}/lib/firmware"
if [ -n "${K_WORKAROUND_SOURCES_COLLISION}" ]; then
# Fixing up Makefile collision if already installed by
# openvz-sources
einfo "Workarounding source package collisions"
make_file="${KV_OUT_DIR/\//}/Makefile"
einfo "Makefile: ${make_file}"
if [ -f "${ROOT}/${make_file}" ]; then
elog "Removing ${D}/${make_file}"
rm -f "${D}/${make_file}"
fi
fi
# Install kernel configuration information
# useful for Entropy kernel-switcher
if _is_kernel_binary; then
# release level is enough for now
base_dir="/etc/kernels/${P}"
dodir "${base_dir}"
insinto "${base_dir}"
echo "${KV_FULL}" > "RELEASE_LEVEL"
doins "RELEASE_LEVEL"
einfo "Installing ${base_dir}/RELEASE_LEVEL file: ${KV_FULL}"
fi
# copy firmware config file to propper location
if [ -n "${K_NASKERNEL_SELF_TARBALL_NAME}" ]; then
local base_path="${S}/sablink/config"
cp "${base_path}/${K_NASKERNEL_FW_CONFIG_FILE}" "${D}/etc/fw_env.config.${K_NASKERNEL_NAME}" || die "cannot copy firmware config"
else
if [ "${K_NASKERNEL_URI_CONFIG}" = "no" ]; then
cp "${FILESDIR}/${PF/-r0/}-${ARCH}.config" "${D}/etc/fw_env.config.${K_NASKERNEL_NAME}" || die "cannot copy firmware config"
else
cp "${DISTDIR}/${K_NASKERNEL_FW_CONFIG_FILE}" "${D}/etc/fw_env.config.${K_NASKERNEL_NAME}" || die "cannot copy firmware config"
fi
fi
}
nas-kernel_pkg_preinst() {
if _is_kernel_binary; then
mount-boot_pkg_preinst
fi
}
_get_real_extraversion() {
make_file="${ROOT}${KV_OUT_DIR}/Makefile"
local extraver=$(grep -r "^EXTRAVERSION =" "${make_file}" | cut -d "=" -f 2 | head -n 1)
local trimmed=${extraver%% }
echo ${trimmed## }
}
_get_release_level() {
if [[ -n "${K_WORKAROUND_USE_REAL_EXTRAVERSION}" ]]; then
echo "${KV_MAJOR}.${KV_MINOR}.${KV_PATCH}$(_get_real_extraversion)"
elif [[ "${KV_MAJOR}${KV_MINOR}" -eq 26 ]]; then
echo "${KV_FULL}"
elif [[ "${OKV/.*}" = "3" ]] && [[ "${KV_PATCH}" = "0" ]]; then
# Linux 3.x support, KV_FULL is set to: 3.0-sablink
# need to add another final .0 to the version part
echo "${KV_FULL/-/.0-}"
else
echo "${KV_FULL}"
fi
}
nas-kernel_uimage_config() {
# Two cases here:
# 1. /boot/uImage symlink is broken (pkg_postrm)
# 2. /boot/uImage symlink doesn't exist (pkg_postinst)
if ! has_version app-admin/eselect-uimage; then
ewarn "app-admin/eselect-uimage not installed"
ewarn "If you are using this tool, please install it"
return 0
fi
local uimage_file=$(eselect uimage show --quiet 2> /dev/null)
if [ -z "${uimage_file}" ]; then
# pick the first listed, sorry!
local eselect_list=$(eselect uimage list --quiet 2> /dev/null)
if [ -n "${eselect_list}" ]; then
eselect uimage set 1
else
echo
ewarn "No more kernels available, you won't be able to boot"
echo
fi
else
echo
elog "You are currently booting with kernel:"
elog "${uimage_file}"
elog
elog "Use 'eselect uimage' in order to switch between the available ones"
echo
fi
}
nas-kernel_pkg_postinst() {
if _is_kernel_binary; then
fstab_file="${ROOT}etc/fstab"
einfo "Removing extents option for ext4 drives from ${fstab_file}"
# Remove "extents" from /etc/fstab
if [ -f "${fstab_file}" ]; then
sed -i '/ext4/ s/extents//g' "${fstab_file}"
fi
# Setup newly installed kernel on ARM
if use arm; then
nas-kernel_uimage_config
fi
kernel-2_pkg_postinst
local depmod_r=$(_get_release_level)
_update_depmod "${depmod_r}"
elog "Please report kernel bugs at:"
elog "http://bugs.sablink.org"
elog "The source code of this kernel is located at"
elog "=${K_KERNEL_SOURCES_PKG}."
elog "Sablink Linux recommends that portage users install"
elog "${K_KERNEL_SOURCES_PKG} if you want"
elog "to build any packages that install kernel modules"
elog "(such as sim-buffalo, etc...)."
# copy the firmware config for the actual hardware to the right place
device=$(grep "Hardware[[:space:]]*:" /proc/cpuinfo 2>/dev/null | head -n1 | sed "s/^[^:]*: //")
if [ "${K_NASKERNEL_DEVICE}" = "$device" ]; then
cp ${ROOT}/etc/fw_env.config.${K_NASKERNEL_NAME} ${ROOT}/etc/fw_env.config
fi
else
kernel-2_pkg_postinst
fi
}
nas-kernel_pkg_prerm() {
if _is_kernel_binary; then
mount-boot_pkg_prerm
fi
}
nas-kernel_pkg_postrm() {
if _is_kernel_binary; then
# Setup newly installed kernel on ARM
if use arm; then
nas-kernel_uimage_config
fi
fi
}
# export all the available functions here
case ${EAPI:-0} in
0|1) extra_export_funcs= ;;
*) extra_export_funcs=src_prepare ;;
esac
EXPORT_FUNCTIONS pkg_setup src_unpack ${extra_export_funcs} src_compile src_install pkg_preinst pkg_postinst pkg_prerm pkg_postrm
#EXPORT_FUNCTIONS pkg_setup src_unpack src_prepare src_compile src_install pkg_preinst pkg_postinst pkg_prerm pkg_postrm