add chamge password script

git-svn-id: https://svn.disconnected-by-peer.at/svn/linamh/trunk/genlink@2626 6952d904-891a-0410-993b-d76249ca496b

Documentation/ls_pro_live/armv5tejl-stage4.spec

@@ -92,7 +92,7 @@ stage4/use:
 # then it will be defined elsewhere.
 # example:
 # stage4/packages: livecd-tools dhcpcd acpid apmd gentoo-sources coldplug fxload irssi gpm syslog-ng parted links raidtools dosfstools nfs-utils jfsutils xfsprogs e2fsprogs reiserfsprogs ntfsprogs pwgen rp-pppoe screen mirrorselect penggy iputils hwdata-knoppix hwsetup lvm2 evms vim pptpclient mdadm ethtool wireless-tools prism54-firmware wpa_supplicant
-stage4/packages: layman openssh dhcpcd micro_evtd linux-buffalo_ls_pro_live buffalo_ls_pro_live-sources gpm syslog-ng gdisk parted atop links dosfstools nfs-utils jfsutils xfsprogs e2fsprogs reiserfsprogs reiser4progs pwgen screen mirrorselect iputils lvm2 vim mdadm ethtool ntp smartmontools hddtemp
+stage4/packages: layman openssh dhcpcd udev micro_evtd expect linux-buffalo_ls_pro_live buffalo_ls_pro_live-sources gpm syslog-ng gdisk parted atop links dosfstools nfs-utils jfsutils xfsprogs e2fsprogs reiserfsprogs reiser4progs pwgen screen mirrorselect iputils lvm2 vim mdadm ethtool ntp smartmontools hddtemp
 
 # A fsscript is simply a shell script that is copied into the chroot of the stage4
 # after the kernel(s) and any external modules have been compiled and is 
@@ -149,7 +149,7 @@ stage4/modblacklist:
 # correctly for us.  Since we do not use this, it is left blank below.
 # example:
 # stage4/rcadd:
-stage4/rcadd: micro_evtd|boot hwclock|boot syslog-ng|boot sysfs|boot net.eth0|boot dbus|default linux-logo|default ntpd|default ntp-client|default smartd|default hddtemp|default sshd|default
+stage4/rcadd: udev|sysinit micro_evtd|boot hwclock|boot root|boot procfs|boot mtab|boot fsck|boot swap|boot syslog-ng|default net.eth0|default dbus|default linux-logo|default ntpd|default ntp-client|default smartd|default hddtemp|default sshd|default 
 
 # This is for removing init script from runlevels.  It is executed after the
 # defaults shipped with catalyst, so it is possible to remove the defaults using

Documentation/ls_pro_live/fsscript

@@ -2,3 +2,20 @@
 cd /boot
 ln -sf uImage-*.buffalo uImage.buffalo
 ln -sf initrd-*.buffalo initrd.buffalo
+# no search for .svn dir
+# as a subversiontree is used for /etc/portage & /var/lib/layman/go-genlink
+# so remove by hand
+rm -rf /.svn
+rm -rf /etc/.svn
+rm -rf /etc/conf.d/.svn
+rm -rf /etc/layman/.svn
+rm -rf /etc/profile.d/.svn
+rm -rf /var/.svn
+rm -rf /var/lib/.svn
+rm -rf /var/lib/layman/.svn
+rm -rf /usr/.svn
+rm -rf /usr/local/.svn
+rm -rf /usr/local/bin/.svn
+
+# chamge password for root user
+/usr/local/bin/changepassword root goLsProLive

Documentation/ls_pro_live/root_overlay/usr/local/bin/changepassword

@@ -0,0 +1,49 @@
+#!/usr/bin/expect -f
+# Password change shell script, tested on Linux and FreeBSD
+# ----------------------------------
+# It need expect tool. If you are using Linux use following command
+# to install expect
+# apt-get install expect
+# FreeBSD user can use ports or following command:
+# pkg_add -r -v expect
+# ----------------------------------
+# If you are using linux change first line
+# From:
+#!/usr/local/bin/expect -f
+# To:
+#!/usr/bin/expect -f
+# -----------------------------------------------
+# Copyright (c) 2006 nixCraft project
+# This script is licensed under GNU GPL version 2.0 or above
+# -------------------------------------------------------------------------
+# This script is part of nixCraft shell script collection (NSSC)
+# Visit http://bash.cyberciti.biz/ for more information.
+# -------------------------------------------------------------------------
+# display usage
+if {$argc!=2} {
+   send_user "usage: $argv0 username password \n"
+   exit
+}
+# script must be run by root user
+set whoami [exec id -u]
+if {$whoami!=0} {
+   send_user "You must be a root user to run this script\n"
+   exit
+}
+#
+set timeout -1
+match_max 100000
+# stopre password
+set password [lindex $argv 1]
+# username
+set user [lindex $argv 0]
+# opem shell
+spawn $env(SHELL)
+# send passwd command
+send -- "passwd $user\r"
+expect "assword:"
+send "$password\r"
+expect  "assword:"
+send "$password\r"
+send "\r"
+expect eof

Documentation/ls_xhl/armv5tejl-stage4.spec

@@ -92,7 +92,7 @@ stage4/use:
 # then it will be defined elsewhere.
 # example:
 # stage4/packages: livecd-tools dhcpcd acpid apmd gentoo-sources coldplug fxload irssi gpm syslog-ng parted links raidtools dosfstools nfs-utils jfsutils xfsprogs e2fsprogs reiserfsprogs ntfsprogs pwgen rp-pppoe screen mirrorselect penggy iputils hwdata-knoppix hwsetup lvm2 evms vim pptpclient mdadm ethtool wireless-tools prism54-firmware wpa_supplicant
-stage4/packages: openssh dhcpcd micro_evtd linux-buffalo_ls_xhl sim_buffalo gpm syslog-ng gdisk parted links dosfstools nfs-utils jfsutils xfsprogs e2fsprogs reiserfsprogs reiser4progs pwgen screen mirrorselect iputils lvm2 vim mdadm ethtool ntp smartmontools hddtemp
+stage4/packages: layman openssh dhcpcd micro_evtd linux-buffalo_ls_xhl sim_buffalo gpm syslog-ng gdisk parted links dosfstools nfs-utils jfsutils xfsprogs e2fsprogs reiserfsprogs reiser4progs pwgen screen mirrorselect iputils lvm2 vim mdadm ethtool ntp smartmontools hddtemp
 
 # A fsscript is simply a shell script that is copied into the chroot of the stage4
 # after the kernel(s) and any external modules have been compiled and is 

Documentation/ls_xhl/fsscript

@@ -0,0 +1,21 @@
+#!/bin/sh
+cd /boot
+ln -sf uImage-*.buffalo uImage.buffalo
+ln -sf initrd-*.buffalo initrd.buffalo
+# no search for .svn dir
+# as a subversiontree is used for /etc/portage & /var/lib/layman/go-genlink
+# so remove by hand
+rm -rf /.svn
+rm -rf /etc/.svn
+rm -rf /etc/conf.d/.svn
+rm -rf /etc/layman/.svn
+rm -rf /etc/profile.d/.svn
+rm -rf /var/.svn
+rm -rf /var/lib/.svn
+rm -rf /var/lib/layman/.svn
+rm -rf /usr/.svn
+rm -rf /usr/local/.svn
+rm -rf /usr/local/bin/.svn
+
+# chamge password for root user
+/usr/local/bin/changepassword root goLsXhl

Documentation/ls_xhl/root_overlay/usr/local/bin/changepassword

@@ -0,0 +1,49 @@
+#!/usr/bin/expect -f
+# Password change shell script, tested on Linux and FreeBSD
+# ----------------------------------
+# It need expect tool. If you are using Linux use following command
+# to install expect
+# apt-get install expect
+# FreeBSD user can use ports or following command:
+# pkg_add -r -v expect
+# ----------------------------------
+# If you are using linux change first line
+# From:
+#!/usr/local/bin/expect -f
+# To:
+#!/usr/bin/expect -f
+# -----------------------------------------------
+# Copyright (c) 2006 nixCraft project
+# This script is licensed under GNU GPL version 2.0 or above
+# -------------------------------------------------------------------------
+# This script is part of nixCraft shell script collection (NSSC)
+# Visit http://bash.cyberciti.biz/ for more information.
+# -------------------------------------------------------------------------
+# display usage
+if {$argc!=2} {
+   send_user "usage: $argv0 username password \n"
+   exit
+}
+# script must be run by root user
+set whoami [exec id -u]
+if {$whoami!=0} {
+   send_user "You must be a root user to run this script\n"
+   exit
+}
+#
+set timeout -1
+match_max 100000
+# stopre password
+set password [lindex $argv 1]
+# username
+set user [lindex $argv 0]
+# opem shell
+spawn $env(SHELL)
+# send passwd command
+send -- "passwd $user\r"
+expect "assword:"
+send "$password\r"
+expect  "assword:"
+send "$password\r"
+send "\r"
+expect eof