add all files stil nit in svn

git-svn-id: https://svn.disconnected-by-peer.at/svn/linamh/trunk/genlink@2594 6952d904-891a-0410-993b-d76249ca496b

Documentation/ls_pro_live/armv5tejl-stage1.spec

@@ -1,12 +1,107 @@
+# generic installation stage specfile
+# used to build a stage1, stage2, or stage3 installation tarball
+
+# The subarch can be any of the supported catalyst subarches (like athlon-xp).
+# Refer to the catalyst reference manual for suppurted subarches.
+# http://www.gentoo.org/proj/en/releng/catalyst/
+# example:
+# subarch: athlon-xp
 subarch: arm
+
+# The version stamp is an identifier for the build.  It can be anything you wish
+# it to be, but it is usually a date.
+# example:
+# version_stamp: 2006.1
 version_stamp: armv5tejl.0
+
+# The target specifies what target we want catalyst to do. For stages, the
+# supported targets are: stage1 stage2 stage3
+# example:
+# target: stage2
 target: stage1
+
+# The rel_type defines what kind of build we are doing.  This is merely another
+# identifier, but it useful for allowing multiple concurrent builds.  Usually,
+# default will suffice.
+# example:
+# rel_type: default
 rel_type: default
-profile: default-linux/arm/10.0
+
+# This is the system profile to be used by catalyst to build this target.  It is
+# specified as a relative path from /usr/portage/profiles.
+# example:
+# profile: default-linux/x86/2006.1
+profile: default-linux/arm/10.0/server
+
+# This specifies which snapshot to use for building this target.
+# example:
+# snapshot: 2006.1
 snapshot: armv5tejl.0
-source_subpath: default/stage4-armv5tejl-genlink.10.0
+
+# This specifies where the seed stage comes from for this target,  The path is
+# relative to $clst_sharedir/builds.  The rel_type is also used as a path prefix
+# for the seed.
+# example:
+# default/stage3-x86-2006.1
+source_subpath: default/stage3-arm-armv5tejl.0
+
+# These are the hosts used as distcc slaves when distcc is enabled in your 
+# catalyst.conf.  It follows the same syntax as distcc-config --set-hosts and
+# is entirely optional.
+# example:
+# distcc_hosts: 127.0.0.1 192.168.0.1
+distcc_hosts:
+
+# This is an optional directory containing portage configuration files.  It
+# follows the same syntax as /etc/portage and should be consistent across all
+# targets to minimize problems.
+# example:
+# portage_confdir: /etc/portage
 portage_confdir: /home/mario/mars/linamh/trunk/genlink/Documentation/ls_pro_live/portage/
+
+# This option specifies the location to a portage overlay that you would like to
+# have used when building this target.
+# example:
+# portage_overlay: /usr/local/portage
 portage_overlay: /home/mario/mars/linamh/trunk/genlink
+
+# This allows the optional directory containing the output packages for
+# catalyst.  Mainly used as a way for different spec files to access the same
+# cache directory.  Default behavior is for this location to be autogenerated
+# by catalyst based on the spec file.
+# example:
+# pkgcache_path: /tmp/packages
+# pkgcache_path:
+
+# These options are only available when building a stage1 or stage2 target and
+# are all optional.  These allow for emulating the changes possible during ai
+# bootstrap.  Some possible uses of these would be building embedded stages
+# requiring a different CHOST or building a stage2 with NPTL support from a
+# stage1 tarball that is built without it.
+# If left blank, then the catalyst defaults from arch.py are used.
+
+# This option is used to change the CHOST from what is default in the profile
+# to whatever you specify.  This is useful for building NPTL, for example.
+# example:
+# chost: i686-pc-linux-gnu
 chost: armv5tejl-softfloat-linux-gnueabi
-cflags: -Os -pipe
+
-cxxflags: -Os -pipe
+# This option allows you to change the default CFLAGS that will be used in
+# building this stage.  This really should remain generic, as putting
+# optimizations flags here will build a stage1 tarball that is no longer
+# generic.
+# example:
+# cflags: -Os -pipe -fomit-frame-pointer -mcpu=i686
+cflags: -march=armv5te -mtune=arm926ej-s -Os -fomit-frame-pointer -pipe
+
+# This is for setting the CXXFLAGS.  Generally, this would be set to the same
+# as CFLAGS.  In fact, it will mirror CFLAGS by default.
+# example:
+# cxxflags: -Os -pipe -fomit-frame-pointer -mcpu=i686
+cxxflags: -march=armv5te -mtune=arm926ej-s -Os -fomit-frame-pointer -pipe
+
+# Setting this option sets LDFLAGS in make.conf in your stage.  This would be
+# useful for setting up an embedded or hardened system.
+# example:
+# ldflags: -Wl,-O1 -Wl,-z,now
+ldflags: -Wl,--hash-style=gnu -Wl,-O1 -Wl,--as-needed

Documentation/ls_pro_live/armv5tejl-stage2.spec

@@ -1,12 +1,107 @@
+# generic installation stage specfile
+# used to build a stage1, stage2, or stage3 installation tarball
+
+# The subarch can be any of the supported catalyst subarches (like athlon-xp).
+# Refer to the catalyst reference manual for suppurted subarches.
+# http://www.gentoo.org/proj/en/releng/catalyst/
+# example:
+# subarch: athlon-xp
 subarch: arm
+
+# The version stamp is an identifier for the build.  It can be anything you wish
+# it to be, but it is usually a date.
+# example:
+# version_stamp: 2006.1
 version_stamp: armv5tejl.0
+
+# The target specifies what target we want catalyst to do. For stages, the
+# supported targets are: stage1 stage2 stage3
+# example:
+# target: stage2
 target: stage2
+
+# The rel_type defines what kind of build we are doing.  This is merely another
+# identifier, but it useful for allowing multiple concurrent builds.  Usually,
+# default will suffice.
+# example:
+# rel_type: default
 rel_type: default
-profile: default-linux/arm/10.0
+
+# This is the system profile to be used by catalyst to build this target.  It is
+# specified as a relative path from /usr/portage/profiles.
+# example:
+# profile: default-linux/x86/2006.1
+profile: default-linux/arm/10.0/server
+
+# This specifies which snapshot to use for building this target.
+# example:
+# snapshot: 2006.1
 snapshot: armv5tejl.0
+
+# This specifies where the seed stage comes from for this target,  The path is
+# relative to $clst_sharedir/builds.  The rel_type is also used as a path prefix
+# for the seed.
+# example:
+# default/stage3-x86-2006.1
 source_subpath: default/stage1-arm-armv5tejl.0
+
+# These are the hosts used as distcc slaves when distcc is enabled in your 
+# catalyst.conf.  It follows the same syntax as distcc-config --set-hosts and
+# is entirely optional.
+# example:
+# distcc_hosts: 127.0.0.1 192.168.0.1
+distcc_hosts:
+
+# This is an optional directory containing portage configuration files.  It
+# follows the same syntax as /etc/portage and should be consistent across all
+# targets to minimize problems.
+# example:
+# portage_confdir: /etc/portage
 portage_confdir: /home/mario/mars/linamh/trunk/genlink/Documentation/ls_pro_live/portage/
+
+# This option specifies the location to a portage overlay that you would like to
+# have used when building this target.
+# example:
+# portage_overlay: /usr/local/portage
 portage_overlay: /home/mario/mars/linamh/trunk/genlink
+
+# This allows the optional directory containing the output packages for
+# catalyst.  Mainly used as a way for different spec files to access the same
+# cache directory.  Default behavior is for this location to be autogenerated
+# by catalyst based on the spec file.
+# example:
+# pkgcache_path: /tmp/packages
+pkgcache_path:
+
+# These options are only available when building a stage1 or stage2 target and
+# are all optional.  These allow for emulating the changes possible during ai
+# bootstrap.  Some possible uses of these would be building embedded stages
+# requiring a different CHOST or building a stage2 with NPTL support from a
+# stage1 tarball that is built without it.
+# If left blank, then the catalyst defaults from arch.py are used.
+
+# This option is used to change the CHOST from what is default in the profile
+# to whatever you specify.  This is useful for building NPTL, for example.
+# example:
+# chost: i686-pc-linux-gnu
 chost: armv5tejl-softfloat-linux-gnueabi
-cflags: -Os -pipe
+
-cxxflags: -Os -pipe
+# This option allows you to change the default CFLAGS that will be used in
+# building this stage.  This really should remain generic, as putting
+# optimizations flags here will build a stage1 tarball that is no longer
+# generic.
+# example:
+# cflags: -Os -pipe -fomit-frame-pointer -mcpu=i686
+cflags: -march=armv5te -mtune=arm926ej-s -Os -fomit-frame-pointer -pipe
+
+# This is for setting the CXXFLAGS.  Generally, this would be set to the same
+# as CFLAGS.  In fact, it will mirror CFLAGS by default.
+# example:
+# cxxflags: -Os -pipe -fomit-frame-pointer -mcpu=i686
+cxxflags: -march=armv5te -mtune=arm926ej-s -Os -fomit-frame-pointer -pipe
+
+# Setting this option sets LDFLAGS in make.conf in your stage.  This would be
+# useful for setting up an embedded or hardened system.
+# example:
+# ldflags: -Wl,-O1 -Wl,-z,now
+ldflags: -Wl,--hash-style=gnu -Wl,-O1 -Wl,--as-needed

Documentation/ls_pro_live/armv5tejl-stage3.spec

@@ -1,11 +1,107 @@
+# generic installation stage specfile
+# used to build a stage1, stage2, or stage3 installation tarball
+
+# The subarch can be any of the supported catalyst subarches (like athlon-xp).
+# Refer to the catalyst reference manual for suppurted subarches.
+# http://www.gentoo.org/proj/en/releng/catalyst/
+# example:
+# subarch: athlon-xp
 subarch: arm
+
+# The version stamp is an identifier for the build.  It can be anything you wish
+# it to be, but it is usually a date.
+# example:
+# version_stamp: 2006.1
 version_stamp: armv5tejl.0
+
+# The target specifies what target we want catalyst to do. For stages, the
+# supported targets are: stage1 stage2 stage3
+# example:
+# target: stage2
 target: stage3
+
+# The rel_type defines what kind of build we are doing.  This is merely another
+# identifier, but it useful for allowing multiple concurrent builds.  Usually,
+# default will suffice.
+# example:
+# rel_type: default
 rel_type: default
-profile: default-linux/arm/10.0
+
+# This is the system profile to be used by catalyst to build this target.  It is
+# specified as a relative path from /usr/portage/profiles.
+# example:
+# profile: default-linux/x86/2006.1
+profile: default-linux/arm/10.0/server
+
+# This specifies which snapshot to use for building this target.
+# example:
+# snapshot: 2006.1
 snapshot: armv5tejl.0
+
+# This specifies where the seed stage comes from for this target,  The path is
+# relative to $clst_sharedir/builds.  The rel_type is also used as a path prefix
+# for the seed.
+# example:
+# default/stage3-x86-2006.1
 source_subpath: default/stage2-arm-armv5tejl.0
+
+# These are the hosts used as distcc slaves when distcc is enabled in your 
+# catalyst.conf.  It follows the same syntax as distcc-config --set-hosts and
+# is entirely optional.
+# example:
+# distcc_hosts: 127.0.0.1 192.168.0.1
+distcc_hosts:
+
+# This is an optional directory containing portage configuration files.  It
+# follows the same syntax as /etc/portage and should be consistent across all
+# targets to minimize problems.
+# example:
+# portage_confdir: /etc/portage
 portage_confdir: /home/mario/mars/linamh/trunk/genlink/Documentation/ls_pro_live/portage/
+
+# This option specifies the location to a portage overlay that you would like to
+# have used when building this target.
+# example:
+# portage_overlay: /usr/local/portage
 portage_overlay: /home/mario/mars/linamh/trunk/genlink
-cflags: -Os -pipe
+
-cxxflags: -Os -pipe
+# This allows the optional directory containing the output packages for
+# catalyst.  Mainly used as a way for different spec files to access the same
+# cache directory.  Default behavior is for this location to be autogenerated
+# by catalyst based on the spec file.
+# example:
+# pkgcache_path: /tmp/packages
+pkgcache_path:
+
+# These options are only available when building a stage1 or stage2 target and
+# are all optional.  These allow for emulating the changes possible during ai
+# bootstrap.  Some possible uses of these would be building embedded stages
+# requiring a different CHOST or building a stage2 with NPTL support from a
+# stage1 tarball that is built without it.
+# If left blank, then the catalyst defaults from arch.py are used.
+
+# This option is used to change the CHOST from what is default in the profile
+# to whatever you specify.  This is useful for building NPTL, for example.
+# example:
+# chost: i686-pc-linux-gnu
+# chost:
+
+# This option allows you to change the default CFLAGS that will be used in
+# building this stage.  This really should remain generic, as putting
+# optimizations flags here will build a stage1 tarball that is no longer
+# generic.
+# example:
+# cflags: -Os -pipe -fomit-frame-pointer -mcpu=i686
+cflags: -march=armv5te -mtune=arm926ej-s -Os -fomit-frame-pointer -pipe
+
+# This is for setting the CXXFLAGS.  Generally, this would be set to the same
+# as CFLAGS.  In fact, it will mirror CFLAGS by default.
+# example:
+# cxxflags: -Os -pipe -fomit-frame-pointer -mcpu=i686
+cxxflags: -march=armv5te -mtune=arm926ej-s -Os -fomit-frame-pointer -pipe
+
+# Setting this option sets LDFLAGS in make.conf in your stage.  This would be
+# useful for setting up an embedded or hardened system.
+# example:
+# ldflags: -Wl,-O1 -Wl,-z,now
+ldflags: -Wl,--hash-style=gnu -Wl,-O1 -Wl,--as-needed

Documentation/ls_pro_live/armv5tejl-stage4.spec

@@ -0,0 +1,258 @@
+# stage4 example specfile
+# used to build a stage4
+
+# The subarch can be any of the supported catalyst subarches (like athlon-xp).
+# Refer to the catalyst reference manual for suppurted subarches.
+# http://www.gentoo.org/proj/en/releng/catalyst/
+# example:
+# subarch: athlon-xp
+subarch: arm
+
+# The version stamp is an identifier for the build.  It can be anything you wish# it to be, but it is usually a date.
+# example:
+# version_stamp: 2006.1
+version_stamp: armv5tejl-buffalo_ls_pro_live.0
+
+# The target specifies what target we want catalyst to do.  For building a CD,
+# we start with stage4 as our target.
+# example:
+# target: stage4
+target: stage4
+
+# The rel_type defines what kind of build we are doing.  This is merely another
+# identifier, but it useful for allowing multiple concurrent builds.  Usually,
+# default will suffice.
+# example:
+# rel_type: default
+rel_type: default
+
+# This is the system profile to be used by catalyst to build this target.  It is# specified as a relative path from /usr/portage/profiles.
+# example:
+# profile: default-linux/x86/2006.1
+profile: default-linux/arm/10.0/server
+
+# This specifies which snapshot to use for building this target.
+# example:
+# snapshot: 2006.1
+snapshot: armv5tejl.0
+
+# This specifies where the seed stage comes from for this target,  The path is
+# relative to $clst_sharedir/builds.  The rel_type is also used as a path prefix# for the seed.
+# example:
+# default/stage3-x86-2006.1
+source_subpath: default/stage3-arm-armv5tejl.0
+
+# These are the hosts used as distcc slaves when distcc is enabled in your
+# catalyst.conf.  It follows the same syntax as distcc-config --set-hosts and
+# is entirely optional.
+# example:
+# distcc_hosts: 127.0.0.1 192.168.0.1
+distcc_hosts:
+
+# This is an optional directory containing portage configuration files.  It
+# follows the same syntax as /etc/portage and should be consistent across all
+# targets to minimize problems.
+# example:
+# portage_confdir: /etc/portage
+portage_confdir: /home/mario/mars/linamh/trunk/genlink/Documentation/ls_pro_live/portage/
+
+# This option specifies the location to a portage overlay that you would like to
+# have used when building this target.
+# example:
+# portage_overlay: /usr/local/portage
+portage_overlay: /home/mario/mars/linamh/trunk/genlink
+
+# This allows the optional directory containing the output packages for
+# catalyst.  Mainly used as a way for different spec files to access the same
+# cache directory.  Default behavior is for this location to be autogenerated
+# by catalyst based on the spec file.
+# example: 
+# pkgcache_path: /tmp/packages
+pkgcache_path:
+
+# This allows the optional directory containing the output packages for kernel
+# builds.  Mainly used as a way for different spec files to access the same
+# cache directory.  Default behavior is for this location to be autogenerated
+# by catalyst based on the spec file.
+# example:
+# kerncache_path: /tmp/kernel
+kerncache_path:
+
+# The stage4 target is where you will build packages for basically updated
+# stage3.  These packages can be built with customized USE settings.  The
+# settings here are additive to the default USE configured by the profile.  
+# Leaving this blank will default to the system use flags
+# example:
+# stage4/use: ipv6 socks5 fbcon ncurses readline ssl
+stage4/use:
+
+# This is the set of packages that we will merge into the stage4 tarball.  They
+# will be built with the USE flags configured above.  These packages must not
+# depend on a configured kernel.  If the package requires a configured kernel,
+# then it will be defined elsewhere.
+# example:
+# stage4/packages: livecd-tools dhcpcd acpid apmd gentoo-sources coldplug fxload irssi gpm syslog-ng parted links raidtools dosfstools nfs-utils jfsutils xfsprogs e2fsprogs reiserfsprogs ntfsprogs pwgen rp-pppoe screen mirrorselect penggy iputils hwdata-knoppix hwsetup lvm2 evms vim pptpclient mdadm ethtool wireless-tools prism54-firmware wpa_supplicant
+stage4/packages: openssh dhcpcd micro_evtd linux-buffalo_ls_pro_live buffalo_ls_pro_live-sources sim_buffalo gpm syslog-ng gdisk parted links raidtools dosfstools nfs-utils jfsutils xfsprogs e2fsprogs reiserfsprogs reiser4progs ntfsprogs pwgen rp-pppoe screen mirrorselect iputils lvm2 evms vim pptpclient mdadm ethtool ntp smartmontools hddtemp
+
+# A fsscript is simply a shell script that is copied into the chroot of the stage4
+# after the kernel(s) and any external modules have been compiled and is 
+# executed within the chroot.  It can contain any commands that are available
+# via the packages installed by our stages or by the packages installed during
+# the stage4-stage1 build.  We do not use one for the official release media, so
+# there will not be one listed below.  The syntax is simply the full path and
+# filename to the shell script that you wish to execute.  The script is copied
+# into the chroot by catalyst automatically.
+# example:
+# stage4/fsscript:
+stage4/fsscript: /home/mario/mars/linamh/trunk/genlink/Documentation/ls_pro_live/fsscript
+
+# This is where you set the splash theme.  This theme must be present in
+# /etc/splash, before the kernel has completed building.
+# example:
+# stage4/splash_theme: livecd-2006.1
+stage4/splash_theme:
+
+# This is a set of arguments that will be passed to genkernel for all kernels
+# defined in this target.  It is useful for passing arguments to genkernel that
+# are not otherwise available via the stage4-stage2 spec file.
+# example:
+# stage4/gk_mainargs: --lvm --dmraid
+stage4/gk_mainargs:
+
+# This option allows you to specify your own linuxrc script for genkernel to use# when building your CD.  This is not checked for functionality, so it is up to
+# you to debug your own script.  We do not use one for the official release
+# media, so there will not be one listed below.
+# example:
+# stage4/linuxrc:
+stage4/linuxrc:
+
+# This is for the message of the day.  It is not required 
+# release media, as catalyst builds a default motd when the stage4/type is set
+# to one of the gentoo-* options.  This setting overrides the default motd even
+# on official media.  Since we do not use this for the official releases, it is
+# left blank below.
+# example:
+# stage4/motd:
+stage4/motd:
+
+# This is for blacklisting modules from being hotplugged that are known to cause
+# problems.  Putting a module name here will keep it from being auto-loaded,
+# even if ti is detected by hotplug.
+# example:
+# stage4/modblacklist: 8139cp
+stage4/modblacklist:
+
+# This is for adding init scripts to runlevels.  The syntax for the init script
+# is the script name, followed by a pipe, followed by the runlevel in which you
+# want the script to run.  It looks like spind|default and is space delimited.
+# We do not use this on the official media, as catalyst sets up the runlevels
+# correctly for us.  Since we do not use this, it is left blank below.
+# example:
+# stage4/rcadd:
+stage4/rcadd: micro_evtd|boot hwclock|boot syslog-ng|boot sysfs|boot net.eth0|boot dbus|default linux-logo|default ntpd|default ntp-client|default smartd|default hddtemp|default sshd|default
+
+# This is for removing init script from runlevels.  It is executed after the
+# defaults shipped with catalyst, so it is possible to remove the defaults using
+# this option.  It can follow the same syntax as livcd/rcadd, or you can leave
+# the runlevel off to remove the script from any runlevels detected.  We do not
+# use this on the official media, so it is left blank.
+# example:
+# stage4/rcdel:
+stage4/rcdel:
+
+# This overlay is dropped onto the filesystem within the loop.  This can be used
+# for such things as updating configuration files or adding anything else you
+# would want within your stage4 filesystem.  Files added here are available when
+# docache is used.  We do not use this on the official media, so we will leave
+# it blank below.
+# example:
+# stage4/root_overlay:
+stage4/root_overlay: /home/mario/mars/linamh/trunk/genlink/Documentation/ls_pro_live/root_overlay
+
+# This is used by catalyst to copy the specified file to /etc/X11/xinit/xinitrc
+# and is used by the stage4/type gentoo-gamecd and generic-livecd.  While the
+# file will still be copied for any stage4/type, catalyst will only create the
+# necessary /etc/startx for those types, so X will not be automatically started.
+# This is useful also for setting up X on a CD where you do not wish X to start
+# automatically.  We do not use this on the release media, so it is left blank.
+# example:
+# stage4/xinitrc:
+stage4/xinitrc:
+
+# This option is used to create non-root users on your CD.  It takes a space
+# separated list of user names.  These users will be added to the following
+# groups: users,wheel,audio,games,cdrom,usb
+# If this is specified in your spec file, then the first user is also the user
+# used to start X. Since this is not used on the release media, it is blank.
+# example:
+# stage4/users:
+stage4/users:
+
+# This option is used to specify the number of kernels to build and also the
+# labels that will be used by the CD bootloader to refer to each kernel image.
+# example:
+# boot/kernel: gentoo
+boot/kernel:
+
+# This option tells catalyst which kernel sources to merge for this kernel
+# label.  This can use normal portage atoms to specify a specific version.
+# example:
+# boot/kernel/gentoo/sources: gentoo-sources
+boot/kernel/gentoo/sources:
+
+# This option is the full path and filename to a kernel .config file that is
+# used by genkernel to compile the kernel this label applies to.
+# example:
+# boot/kernel/gentoo/config: /tmp/2.6.11-smp.config
+boot/kernel/gentoo/config:
+
+# This option sets genkernel parameters on a per-kernel basis and applies only
+# to this kernel label.  This can be used for building options into only a
+# single kernel, where compatibility may be an issue.  Since we do not use this
+# on the official release media, it is left blank, but it follows the same
+# syntax as stage4/gk_mainargs.
+# example:
+# boot/kernel/gentoo/gk_kernargs:
+boot/kernel/gentoo/gk_kernargs:
+
+# This option sets the USE flags used to build the kernel and also any packages
+# which are defined under this kernel label.  These USE flags are additive from
+# the default USE for the specified profile.
+# example:
+# boot/kernel/gentoo/use: pcmcia usb -X
+boot/kernel/gentoo/use:
+
+# This option appends an extension to the name of your kernel, as viewed by a
+# uname -r/  This also affects any modules built under this kernel label.  This
+# is useful for having two kernels using the same sources to keep the modules
+# from overwriting each other.  We do not use this on the official media, so it
+# is left blank.
+# example:
+# boot/kernel/gentoo/extraversion:
+boot/kernel/gentoo/extraversion:
+
+# This option is for merging kernel-dependent packages and external modules that
+# are configured against this kernel label.
+# example:
+# boot/kernel/gentoo/packages: pcmcia-cs speedtouch slmodem globespan-adsl hostap-driver hostap-utils ipw2100 ipw2200 fritzcapi fcdsl cryptsetup
+boot/kernel/gentoo/packages:
+
+# This is a list of packages that will be unmerged after all the kernels have
+# been built.  There are no checks on these packages, so be careful what you
+# add here.  They can potentially break your CD.
+# example:
+# stage4/unmerge: acl attr autoconf automake bin86 binutils libtool m4 bison ld.so make perl patch linux-headers man-pages sash bison flex gettext texinfo ccache distcc addpatches man groff lib-compat miscfiles rsync sysklogd bc lcms libmng genkernel diffutils libperl gnuconfig gcc-config gcc bin86 cpio cronbase ed expat grub lilo help2man libtool gentoo-sources
+stage4/unmerge:
+
+# This option is used to empty the directories listed.  It is useful for getting
+# rid of files that don't belong to a particular package, or removing files from
+# a package that you wish to keep, but won't need the full functionality.
+# example:
+# stage4/empty: /var/tmp /var/cache /var/db /var/empty /var/lock /var/log /var/run /var/spool /var/state /tmp /usr/portage /usr/share/man /usr/share/info /usr/share/unimaps /usr/include /usr/share/zoneinfo /usr/share/dict /usr/share/doc /usr/share/ss /usr/share/state /usr/share/texinfo /usr/lib/python2.2 /usr/lib/portage /usr/share/gettext /usr/share/i18n /usr/share/rfc /usr/lib/X11/config /usr/lib/X11/etc /usr/lib/X11/doc /usr/src /usr/share/doc /usr/share/man /root/.ccache /etc/cron.daily /etc/cron.hourly /etc/cron.monthly /etc/cron.weekly /etc/logrotate.d /etc/rsync /usr/lib/awk /usr/lib/ccache /usr/lib/gcc-config /usr/lib/nfs /usr/local /usr/diet/include /usr/diet/man /usr/share/consolefonts/partialfonts /usr/share/consoletrans /usr/share/emacs /usr/share/gcc-data /usr/share/genkernel /etc/splash/gentoo /etc/splash/emergence /usr/share/gnuconfig /usr/share/lcms /usr/share/locale /etc/skel
+stage4/empty:
+
+# This option tells catalyst to clean specific files from the filesystem and is
+# very usefu in cleaning up stray files in /etc left over after stage4/unmerge.
+# example:
+# stage4/rm: /lib/*.a /usr/lib/*.a /usr/lib/gcc-lib/*/*/libgcj* /etc/dispatch-conf.conf /etc/etc-update.conf /etc/*- /etc/issue* /etc/make.conf /etc/man.conf /etc/*.old /root/.viminfo /usr/sbin/fb* /usr/sbin/fsck.cramfs /usr/sbin/fsck.minix /usr/sbin/mkfs.minix /usr/sbin/mkfs.bfs /usr/sbin/mkfs.cramfs /lib/security/pam_access.so /lib/security/pam_chroot.so /lib/security/pam_debug.so /lib/security/pam_ftp.so /lib/security/pam_issue.so /lib/security/pam_mail.so /lib/security/pam_motd.so /lib/security/pam_mkhomedir.so /lib/security/pam_postgresok.so /lib/security/pam_rhosts_auth.so /lib/security/pam_userdb.so /usr/share/consolefonts/1* /usr/share/consolefonts/7* /usr/share/consolefonts/8* /usr/share/consolefonts/9* /usr/share/consolefonts/A* /usr/share/consolefonts/C* /usr/share/consolefonts/E* /usr/share/consolefonts/G* /usr/share/consolefonts/L* /usr/share/consolefonts/M* /usr/share/consolefonts/R* /usr/share/consolefonts/a* /usr/share/consolefonts/c* /usr/share/consolefonts/dr* /usr/share/consolefonts/g* /usr/share/consolefonts/i* /usr/share/consolefonts/k* /usr/share/consolefonts/l* /usr/share/consolefonts/r* /usr/share/consolefonts/s* /usr/share/consolefonts/t* /usr/share/consolefonts/v* /etc/splash/livecd-2006.1/16* /etc/splash/livecd-2006.1/12* /etc/splash/livecd-2006.1/6* /etc/splash/livecd-2006.1/8* /etc/splash/livecd-2006.1/images/silent-16* /etc/splash/livecd-2006.1/images/silent-12* /etc/splash/livecd-2006.1/images/silent-6* /etc/splash/livecd-2006.1/images/silent-8* /etc/splash/livecd-2006.1/images/verbose-16* /etc/splash/livecd-2006.1/images/verbose-12* /etc/splash/livecd-2006.1/images/verbose-6* /etc/splash/livecd-2006.1/images/verbose-8* /etc/make.conf.example /etc/make.globals /etc/resolv.conf
+stage4/rm: /usr/bin/qemu-arm

Documentation/ls_pro_live/fsscript

@@ -0,0 +1,4 @@
+#!/bin/sh
+cd /boot
+ln -sf uImage-*.buffalo uImage.buffalo
+ln -sf initrd-*.buffalo initrd.buffalo

Documentation/ls_pro_live/root_overlay/etc/fstab

@@ -15,7 +15,7 @@
 
 # NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
 /dev/sda1		/boot		ext2		noauto,noatime	1 2
-/dev/sda2		/		ext3		noatime		0 1
+/dev/sda2		/		reiser4		noatime		0 1
 /dev/sda3		none		swap		sw		0 0
 # /dev/cdrom		/mnt/cdrom	auto		noauto,ro	0 0
 # /dev/fd0		/mnt/floppy	auto		noauto		0 0

Documentation/ls_xhl/armv5tejl-stage4.spec

@@ -0,0 +1,258 @@
+# stage4 example specfile
+# used to build a stage4
+
+# The subarch can be any of the supported catalyst subarches (like athlon-xp).
+# Refer to the catalyst reference manual for suppurted subarches.
+# http://www.gentoo.org/proj/en/releng/catalyst/
+# example:
+# subarch: athlon-xp
+subarch:
+
+# The version stamp is an identifier for the build.  It can be anything you wish# it to be, but it is usually a date.
+# example:
+# version_stamp: 2006.1
+version_stamp:
+
+# The target specifies what target we want catalyst to do.  For building a CD,
+# we start with stage4 as our target.
+# example:
+# target: stage4
+target:
+
+# The rel_type defines what kind of build we are doing.  This is merely another
+# identifier, but it useful for allowing multiple concurrent builds.  Usually,
+# default will suffice.
+# example:
+# rel_type: default
+rel_type:
+
+# This is the system profile to be used by catalyst to build this target.  It is# specified as a relative path from /usr/portage/profiles.
+# example:
+# profile: default-linux/x86/2006.1
+profile:
+
+# This specifies which snapshot to use for building this target.
+# example:
+# snapshot: 2006.1
+snapshot:
+
+# This specifies where the seed stage comes from for this target,  The path is
+# relative to $clst_sharedir/builds.  The rel_type is also used as a path prefix# for the seed.
+# example:
+# default/stage3-x86-2006.1
+source_subpath:
+
+# These are the hosts used as distcc slaves when distcc is enabled in your
+# catalyst.conf.  It follows the same syntax as distcc-config --set-hosts and
+# is entirely optional.
+# example:
+# distcc_hosts: 127.0.0.1 192.168.0.1
+distcc_hosts:
+
+# This is an optional directory containing portage configuration files.  It
+# follows the same syntax as /etc/portage and should be consistent across all
+# targets to minimize problems.
+# example:
+# portage_confdir: /etc/portage
+portage_confdir:
+
+# This option specifies the location to a portage overlay that you would like to
+# have used when building this target.
+# example:
+# portage_overlay: /usr/local/portage
+portage_overlay:
+
+# This allows the optional directory containing the output packages for
+# catalyst.  Mainly used as a way for different spec files to access the same
+# cache directory.  Default behavior is for this location to be autogenerated
+# by catalyst based on the spec file.
+# example: 
+# pkgcache_path: /tmp/packages
+pkgcache_path:
+
+# This allows the optional directory containing the output packages for kernel
+# builds.  Mainly used as a way for different spec files to access the same
+# cache directory.  Default behavior is for this location to be autogenerated
+# by catalyst based on the spec file.
+# example:
+# kerncache_path: /tmp/kernel
+kerncache_path:
+
+# The stage4 target is where you will build packages for basically updated
+# stage3.  These packages can be built with customized USE settings.  The
+# settings here are additive to the default USE configured by the profile.  
+# Leaving this blank will default to the system use flags
+# example:
+# stage4/use: ipv6 socks5 fbcon ncurses readline ssl
+stage4/use:
+
+# This is the set of packages that we will merge into the stage4 tarball.  They
+# will be built with the USE flags configured above.  These packages must not
+# depend on a configured kernel.  If the package requires a configured kernel,
+# then it will be defined elsewhere.
+# example:
+# stage4/packages: livecd-tools dhcpcd acpid apmd gentoo-sources coldplug fxload irssi gpm syslog-ng parted links raidtools dosfstools nfs-utils jfsutils xfsprogs e2fsprogs reiserfsprogs ntfsprogs pwgen rp-pppoe screen mirrorselect penggy iputils hwdata-knoppix hwsetup lvm2 evms vim pptpclient mdadm ethtool wireless-tools prism54-firmware wpa_supplicant
+stage4/packages:
+
+# A fsscript is simply a shell script that is copied into the chroot of the stage4
+# after the kernel(s) and any external modules have been compiled and is 
+# executed within the chroot.  It can contain any commands that are available
+# via the packages installed by our stages or by the packages installed during
+# the stage4-stage1 build.  We do not use one for the official release media, so
+# there will not be one listed below.  The syntax is simply the full path and
+# filename to the shell script that you wish to execute.  The script is copied
+# into the chroot by catalyst automatically.
+# example:
+# stage4/fsscript:
+stage4/fsscript:
+
+# This is where you set the splash theme.  This theme must be present in
+# /etc/splash, before the kernel has completed building.
+# example:
+# stage4/splash_theme: livecd-2006.1
+stage4/splash_theme:
+
+# This is a set of arguments that will be passed to genkernel for all kernels
+# defined in this target.  It is useful for passing arguments to genkernel that
+# are not otherwise available via the stage4-stage2 spec file.
+# example:
+# stage4/gk_mainargs: --lvm --dmraid
+stage4/gk_mainargs:
+
+# This option allows you to specify your own linuxrc script for genkernel to use# when building your CD.  This is not checked for functionality, so it is up to
+# you to debug your own script.  We do not use one for the official release
+# media, so there will not be one listed below.
+# example:
+# stage4/linuxrc:
+stage4/linuxrc:
+
+# This is for the message of the day.  It is not required 
+# release media, as catalyst builds a default motd when the stage4/type is set
+# to one of the gentoo-* options.  This setting overrides the default motd even
+# on official media.  Since we do not use this for the official releases, it is
+# left blank below.
+# example:
+# stage4/motd:
+stage4/motd:
+
+# This is for blacklisting modules from being hotplugged that are known to cause
+# problems.  Putting a module name here will keep it from being auto-loaded,
+# even if ti is detected by hotplug.
+# example:
+# stage4/modblacklist: 8139cp
+stage4/modblacklist:
+
+# This is for adding init scripts to runlevels.  The syntax for the init script
+# is the script name, followed by a pipe, followed by the runlevel in which you
+# want the script to run.  It looks like spind|default and is space delimited.
+# We do not use this on the official media, as catalyst sets up the runlevels
+# correctly for us.  Since we do not use this, it is left blank below.
+# example:
+# stage4/rcadd:
+stage4/rcadd:
+
+# This is for removing init script from runlevels.  It is executed after the
+# defaults shipped with catalyst, so it is possible to remove the defaults using
+# this option.  It can follow the same syntax as livcd/rcadd, or you can leave
+# the runlevel off to remove the script from any runlevels detected.  We do not
+# use this on the official media, so it is left blank.
+# example:
+# stage4/rcdel:
+stage4/rcdel:
+
+# This overlay is dropped onto the filesystem within the loop.  This can be used
+# for such things as updating configuration files or adding anything else you
+# would want within your stage4 filesystem.  Files added here are available when
+# docache is used.  We do not use this on the official media, so we will leave
+# it blank below.
+# example:
+# stage4/root_overlay:
+stage4/root_overlay:
+
+# This is used by catalyst to copy the specified file to /etc/X11/xinit/xinitrc
+# and is used by the stage4/type gentoo-gamecd and generic-livecd.  While the
+# file will still be copied for any stage4/type, catalyst will only create the
+# necessary /etc/startx for those types, so X will not be automatically started.
+# This is useful also for setting up X on a CD where you do not wish X to start
+# automatically.  We do not use this on the release media, so it is left blank.
+# example:
+# stage4/xinitrc:
+stage4/xinitrc:
+
+# This option is used to create non-root users on your CD.  It takes a space
+# separated list of user names.  These users will be added to the following
+# groups: users,wheel,audio,games,cdrom,usb
+# If this is specified in your spec file, then the first user is also the user
+# used to start X. Since this is not used on the release media, it is blank.
+# example:
+# stage4/users:
+stage4/users:
+
+# This option is used to specify the number of kernels to build and also the
+# labels that will be used by the CD bootloader to refer to each kernel image.
+# example:
+# boot/kernel: gentoo
+boot/kernel:
+
+# This option tells catalyst which kernel sources to merge for this kernel
+# label.  This can use normal portage atoms to specify a specific version.
+# example:
+# boot/kernel/gentoo/sources: gentoo-sources
+boot/kernel/gentoo/sources:
+
+# This option is the full path and filename to a kernel .config file that is
+# used by genkernel to compile the kernel this label applies to.
+# example:
+# boot/kernel/gentoo/config: /tmp/2.6.11-smp.config
+boot/kernel/gentoo/config:
+
+# This option sets genkernel parameters on a per-kernel basis and applies only
+# to this kernel label.  This can be used for building options into only a
+# single kernel, where compatibility may be an issue.  Since we do not use this
+# on the official release media, it is left blank, but it follows the same
+# syntax as stage4/gk_mainargs.
+# example:
+# boot/kernel/gentoo/gk_kernargs:
+boot/kernel/gentoo/gk_kernargs:
+
+# This option sets the USE flags used to build the kernel and also any packages
+# which are defined under this kernel label.  These USE flags are additive from
+# the default USE for the specified profile.
+# example:
+# boot/kernel/gentoo/use: pcmcia usb -X
+boot/kernel/gentoo/use:
+
+# This option appends an extension to the name of your kernel, as viewed by a
+# uname -r/  This also affects any modules built under this kernel label.  This
+# is useful for having two kernels using the same sources to keep the modules
+# from overwriting each other.  We do not use this on the official media, so it
+# is left blank.
+# example:
+# boot/kernel/gentoo/extraversion:
+boot/kernel/gentoo/extraversion:
+
+# This option is for merging kernel-dependent packages and external modules that
+# are configured against this kernel label.
+# example:
+# boot/kernel/gentoo/packages: pcmcia-cs speedtouch slmodem globespan-adsl hostap-driver hostap-utils ipw2100 ipw2200 fritzcapi fcdsl cryptsetup
+boot/kernel/gentoo/packages:
+
+# This is a list of packages that will be unmerged after all the kernels have
+# been built.  There are no checks on these packages, so be careful what you
+# add here.  They can potentially break your CD.
+# example:
+# stage4/unmerge: acl attr autoconf automake bin86 binutils libtool m4 bison ld.so make perl patch linux-headers man-pages sash bison flex gettext texinfo ccache distcc addpatches man groff lib-compat miscfiles rsync sysklogd bc lcms libmng genkernel diffutils libperl gnuconfig gcc-config gcc bin86 cpio cronbase ed expat grub lilo help2man libtool gentoo-sources
+stage4/unmerge:
+
+# This option is used to empty the directories listed.  It is useful for getting
+# rid of files that don't belong to a particular package, or removing files from
+# a package that you wish to keep, but won't need the full functionality.
+# example:
+# stage4/empty: /var/tmp /var/cache /var/db /var/empty /var/lock /var/log /var/run /var/spool /var/state /tmp /usr/portage /usr/share/man /usr/share/info /usr/share/unimaps /usr/include /usr/share/zoneinfo /usr/share/dict /usr/share/doc /usr/share/ss /usr/share/state /usr/share/texinfo /usr/lib/python2.2 /usr/lib/portage /usr/share/gettext /usr/share/i18n /usr/share/rfc /usr/lib/X11/config /usr/lib/X11/etc /usr/lib/X11/doc /usr/src /usr/share/doc /usr/share/man /root/.ccache /etc/cron.daily /etc/cron.hourly /etc/cron.monthly /etc/cron.weekly /etc/logrotate.d /etc/rsync /usr/lib/awk /usr/lib/ccache /usr/lib/gcc-config /usr/lib/nfs /usr/local /usr/diet/include /usr/diet/man /usr/share/consolefonts/partialfonts /usr/share/consoletrans /usr/share/emacs /usr/share/gcc-data /usr/share/genkernel /etc/splash/gentoo /etc/splash/emergence /usr/share/gnuconfig /usr/share/lcms /usr/share/locale /etc/skel
+stage4/empty:
+
+# This option tells catalyst to clean specific files from the filesystem and is
+# very usefu in cleaning up stray files in /etc left over after stage4/unmerge.
+# example:
+# stage4/rm: /lib/*.a /usr/lib/*.a /usr/lib/gcc-lib/*/*/libgcj* /etc/dispatch-conf.conf /etc/etc-update.conf /etc/*- /etc/issue* /etc/make.conf /etc/man.conf /etc/*.old /root/.viminfo /usr/sbin/fb* /usr/sbin/fsck.cramfs /usr/sbin/fsck.minix /usr/sbin/mkfs.minix /usr/sbin/mkfs.bfs /usr/sbin/mkfs.cramfs /lib/security/pam_access.so /lib/security/pam_chroot.so /lib/security/pam_debug.so /lib/security/pam_ftp.so /lib/security/pam_issue.so /lib/security/pam_mail.so /lib/security/pam_motd.so /lib/security/pam_mkhomedir.so /lib/security/pam_postgresok.so /lib/security/pam_rhosts_auth.so /lib/security/pam_userdb.so /usr/share/consolefonts/1* /usr/share/consolefonts/7* /usr/share/consolefonts/8* /usr/share/consolefonts/9* /usr/share/consolefonts/A* /usr/share/consolefonts/C* /usr/share/consolefonts/E* /usr/share/consolefonts/G* /usr/share/consolefonts/L* /usr/share/consolefonts/M* /usr/share/consolefonts/R* /usr/share/consolefonts/a* /usr/share/consolefonts/c* /usr/share/consolefonts/dr* /usr/share/consolefonts/g* /usr/share/consolefonts/i* /usr/share/consolefonts/k* /usr/share/consolefonts/l* /usr/share/consolefonts/r* /usr/share/consolefonts/s* /usr/share/consolefonts/t* /usr/share/consolefonts/v* /etc/splash/livecd-2006.1/16* /etc/splash/livecd-2006.1/12* /etc/splash/livecd-2006.1/6* /etc/splash/livecd-2006.1/8* /etc/splash/livecd-2006.1/images/silent-16* /etc/splash/livecd-2006.1/images/silent-12* /etc/splash/livecd-2006.1/images/silent-6* /etc/splash/livecd-2006.1/images/silent-8* /etc/splash/livecd-2006.1/images/verbose-16* /etc/splash/livecd-2006.1/images/verbose-12* /etc/splash/livecd-2006.1/images/verbose-6* /etc/splash/livecd-2006.1/images/verbose-8* /etc/make.conf.example /etc/make.globals /etc/resolv.conf
+stage4/rm:

Documentation/ls_xhl/root_overlay/etc/fstab

@@ -15,7 +15,7 @@
 
 # NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
 /dev/sda1		/boot		ext2		noauto,noatime	1 2
-/dev/sda2		/		ext3		noatime		0 1
+/dev/sda2		/		reiser4		noatime		0 1
 /dev/sda3		none		swap		sw		0 0
 # /dev/cdrom		/mnt/cdrom	auto		noauto,ro	0 0
 # /dev/fd0		/mnt/floppy	auto		noauto		0 0

Documentation/nas-patches/maketar.sh

@@ -0,0 +1,53 @@
+#!/bin/bash
+# 
+# Welcome to the Gentoo Mysql Storage tarball bakery.
+# this Script was based on OurDelta scripts
+# 2009-11-27
+# Mario Fetka <mario.fetka@gmail.com>
+# Peter Lieverdink <peter@openquery.com>
+# Arjen Lentz <arjen@openquery.com>
+#
+# Exit immediately on any error
+set -e
+
+# Debug script and command lines
+#set -x
+
+BAKERY_BASE_DIR="$(dirname $(readlink -f ${0}))"
+BUILD_BASE_DIR="$(pwd)/build-temp-$$"
+
+if [ ! $# -eq 1 ]; then
+	echo "Usage: $0 [package dir]"
+	exit 1
+else
+	UPSTREAM="${1}"
+fi
+
+echo "Going to build tarballs in ${BUILD_BASE_DIR}"
+
+	# Source the info file, so we can use its version info for the tarball.
+	#
+	. $1/mysql-storage/.$1-version
+
+	# Up a dir, rename us and then package up.
+	#
+	pushd $1
+	# Tar it up, but leave the quilt directory out of it
+	#
+	rm -rf ${PACKAGE_NAME}-${VERSION}-${RELEASE_NAME}${RELEASE_EXTRA:+-${RELEASE_EXTRA}}
+	mkdir ${PACKAGE_NAME}-${VERSION}-${RELEASE_NAME}${RELEASE_EXTRA:+-${RELEASE_EXTRA}}
+	cp -rf mysql-storage/* ${PACKAGE_NAME}-${VERSION}-${RELEASE_NAME}${RELEASE_EXTRA:+-${RELEASE_EXTRA}}
+	tar cz -f ${PACKAGE_NAME}-${VERSION}-${RELEASE_NAME}${RELEASE_EXTRA:+-${RELEASE_EXTRA}}.tar.gz \
+			${PACKAGE_NAME}-${VERSION}-${RELEASE_NAME}${RELEASE_EXTRA:+-${RELEASE_EXTRA}}
+	echo "Created ${PACKAGE_NAME}-${VERSION}-${RELEASE_NAME}${RELEASE_EXTRA:+-${RELEASE_EXTRA}}.tar.gz"
+	rm -rf ${PACKAGE_NAME}-${VERSION}-${RELEASE_NAME}${RELEASE_EXTRA:+-${RELEASE_EXTRA}}
+
+	# Move out the tarball.
+	#
+	popd
+	mv $1/${PACKAGE_NAME}-${VERSION}-${RELEASE_NAME}${RELEASE_EXTRA:+-${RELEASE_EXTRA}}.tar.gz .
+
+	# Cleanup
+	#rm -fr "${BUILD_BASE_DIR}"
+
+# Thank you, and good night.

Documentation/nas-patches/nas/patches/kernel-2.6.35-lsxhl.patch

@@ -0,0 +1,329 @@
+diff -uNr a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
+--- a/arch/arm/mach-kirkwood/Kconfig	2010-08-02 00:11:14.000000000 +0200
++++ b/arch/arm/mach-kirkwood/Kconfig	2010-10-05 19:57:48.000000000 +0200
+@@ -99,6 +99,12 @@
+ 	  Say 'Y' here if you want your kernel to support the
+ 	  LaCie 5Big Network v2 NAS.
+ 
++config MACH_LSXHL
++	bool "Buffalo LS-XHL Series"
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Buffalo LS-XHL Series.
++
+ endmenu
+ 
+ endif
+diff -uNr a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
+--- a/arch/arm/mach-kirkwood/Makefile	2010-08-02 00:11:14.000000000 +0200
++++ b/arch/arm/mach-kirkwood/Makefile	2010-10-05 19:58:39.000000000 +0200
+@@ -6,6 +6,7 @@
+ obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
+ obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
+ obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
++obj-$(CONFIG_MACH_LSXHL)		+= lsxhl-setup.o
+ obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
+ obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
+ obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
+diff -uNr a/arch/arm/mach-kirkwood/lsxhl-setup.c b/arch/arm/mach-kirkwood/lsxhl-setup.c
+--- a/arch/arm/mach-kirkwood/lsxhl-setup.c	1970-01-01 01:00:00.000000000 +0100
++++ b/arch/arm/mach-kirkwood/lsxhl-setup.c	2010-10-05 19:57:48.000000000 +0200
+@@ -0,0 +1,286 @@
++/*
++ * arch/arm/mach-kirkwood/sheevaplug-setup.c
++ *
++ * Marvell SheevaPlug Reference Board Setup
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mv643xx_eth.h>
++#include <linux/ata_platform.h>
++#include <linux/gpio.h>
++#include <linux/leds.h>
++#include <linux/gpio_keys.h>
++#include <linux/input.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <mach/kirkwood.h>
++#include <mach/bridge-regs.h>
++#include <plat/mvsdio.h>
++#include <plat/orion_nand.h>
++#include "common.h"
++#include "mpp.h"
++
++/* for pm */
++#include <linux/io.h>
++#include <linux/delay.h>
++#include <asm/proc-fns.h>
++#include <mach/system.h>
++extern void setup_mm_for_reboot(char mode);
++
++
++
++#include <asm/io.h>
++#include <asm/gpio.h>
++
++extern void kirkwood_ge00_exit(void);
++extern void kirkwood_ge01_exit(void);
++
++static struct mv643xx_eth_platform_data lsxhl_ge00_data = {
++	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
++};
++static struct mv643xx_eth_platform_data lsxhl_ge01_data = {
++	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
++};
++
++
++static unsigned int lsxhl_mpp_config[] __initdata = {
++	MPP0_SPI_SCn,
++        MPP1_SPI_MOSI,
++        MPP2_SPI_SCK,
++        MPP3_SPI_MISO,
++        MPP4_UART0_RXD,
++        MPP5_UART0_TXD,
++        MPP6_SYSRST_OUTn,
++        MPP7_GPO,
++        MPP8_GPIO,
++        MPP9_GPIO,
++        MPP10_GPO,    /* HDD Power */
++        MPP11_GPIO,   /* USB VBUS EN */
++        MPP12_SD_CLK,
++        MPP13_SD_CMD,
++        MPP14_SD_D0,
++        MPP15_SD_D1,
++        MPP16_SD_D2,
++        MPP17_SD_D3,
++        MPP18_GPO,    /* FAN HIGH: on:0, off:1 */
++        MPP19_GPO,    /* FAN LOW: on:0, off:1 */
++        MPP20_GE1_0,
++        MPP21_GE1_1,
++        MPP22_GE1_2,
++        MPP23_GE1_3,
++        MPP24_GE1_4,
++        MPP25_GE1_5,
++        MPP26_GE1_6,
++        MPP27_GE1_7,
++        MPP28_GPIO,
++        MPP29_GPIO,
++        MPP30_GE1_10,
++        MPP31_GE1_11,
++        MPP32_GE1_12,
++        MPP33_GE1_13,
++        MPP34_GPIO,
++        MPP35_GPIO,
++        MPP36_GPIO, /* FUNC LED */
++        MPP37_GPIO, /* ALARM LED */ 
++        MPP38_GPIO, /* INFO LED */
++        MPP39_GPIO, /* POWER LED */
++        MPP40_GPIO, /* FAN LOCK */
++        MPP41_GPIO, /* FUNC SW */
++        MPP42_GPIO, /* POWER SW */
++        MPP43_GPIO, /* POWER AUTO SW */
++        MPP44_GPIO,
++        MPP45_GPIO,
++        MPP46_GPIO,
++        MPP47_GPIO,
++        MPP48_GPIO, /* FUNC RED LED */
++        MPP49_GPIO, /* UART EN */
++	0
++};
++
++static struct mv_sata_platform_data lsxhl_sata_data = {
++        .n_ports        = 1,
++};
++
++static struct gpio_led lsxhl_led_pins[] = {
++        {
++                .name                   = "func",
++                .gpio                   = 36,
++                .active_low             = 1,
++        },
++        {
++                .name                   = "alarm",
++                .gpio                   = 37,
++                .active_low             = 1,
++        },
++        {
++                .name                   = "info",
++                .gpio                   = 38,
++                .active_low             = 1,
++        },
++        {
++                .name                   = "power",
++                .gpio                   = 39,
++                .default_trigger        = "default-on",
++                .active_low             = 1,
++        },
++        {
++                .name                   = "func2",
++                .gpio                   = 48,
++                .active_low             = 1,
++        },
++};
++
++static struct gpio_led_platform_data lsxhl_led_data = {
++        .leds           = lsxhl_led_pins,
++        .num_leds       = ARRAY_SIZE(lsxhl_led_pins),
++};
++
++static struct platform_device lsxhl_leds = {
++        .name   = "leds-gpio",
++        .id     = -1,
++        .dev    = {
++                .platform_data  = &lsxhl_led_data,
++        }
++};
++
++#if 0 /* power save in power-off mode. */
++static void lsxhl_power_off(void)
++{
++    int i=0;
++
++/* PCI Express Power Saving: NG 
++    writel(0x20800087, (PCIE_VIRT_BASE | 0x1b00));
++*/
++
++/* Ethernet Power Saving */
++#define GE00_VIRT_BASE          (KIRKWOOD_REGS_VIRT_BASE | 0x70000)
++#define GE01_VIRT_BASE          (KIRKWOOD_REGS_VIRT_BASE | 0x74000)
++    writel(0xff00, (GE00_VIRT_BASE | 0x2680));
++    writel(0xff00, (GE01_VIRT_BASE | 0x2680));
++    writel(readl(GE00_VIRT_BASE | 0x243c) & ~0x400, GE00_VIRT_BASE | 0x243c);
++    writel(readl(GE01_VIRT_BASE | 0x243c) & ~0x400, GE01_VIRT_BASE | 0x243c);
++    writel(readl(GE00_VIRT_BASE | 0x243c) & ~0x1, GE00_VIRT_BASE | 0x243c);
++    writel(readl(GE01_VIRT_BASE | 0x243c) & ~0x1, GE01_VIRT_BASE | 0x243c);
++
++/* NG:
++    kirkwood_clock_gate(CGC_GE0 | CGC_USB0 | CGC_NAND_SPI |
++                        CGC_XOR0 | CGC_SATA0 | CGC_XOR1 |
++                        CGC_CRYPTO | CGC_GE1);
++*/
++/* OK: maybe
++    kirkwood_clock_gate(CGC_GE0 | CGC_USB0 |
++                        CGC_XOR0 | CGC_SATA0 | CGC_XOR1 |
++                        CGC_CRYPTO | CGC_GE1);
++*/
++
++/* Memory Power Management */
++    writel(0x2bff, (BRIDGE_VIRT_BASE | 0x118));
++
++    gpio_direction_output(18, 1); // Fan high off
++    gpio_direction_output(19, 1); // Fan low off
++    gpio_direction_output(11, 0); // USB Power off
++    gpio_direction_output(10, 0); // HDD Power off
++
++    gpio_direction_output(36, 1); // Func LED off
++    gpio_direction_output(37, 1); // Alarm LED off
++    gpio_direction_output(38, 1); // Info LED off
++    gpio_direction_output(39, 1); // Power LED off
++    gpio_direction_output(48, 1); // Func2 LED off
++
++    cpu_proc_fin();
++
++    local_irq_disable();
++    
++    /* disable interrupts to CPU 
++    writel(readl(CPU_CONTROL) | (1 << 28), CPU_CONTROL);
++    */
++
++/* Mbus-L to Mbus Bridge Interrupt Mask Register */
++    writel(BRIDGE_INT_TIMER1, BRIDGE_MASK);
++/* Main IRQ Interrupt Mask Low Register */
++    writel(2, IRQ_VIRT_BASE | 0x04);
++/* Main FIQ Interrupt Mask Low Register */
++    writel(0, IRQ_VIRT_BASE | 0x08);
++/* Endpoint Interrupt Mask Low Register */
++    writel(2, IRQ_VIRT_BASE | 0x0c);
++/* Main IRQ Interrupt Mask High Register */
++    writel(0, IRQ_VIRT_BASE | 0x14);
++/* Main FIQ Interrupt Mask High Register */
++    writel(0, IRQ_VIRT_BASE | 0x18);
++/* Endpoint Interrupt Mask High Register */
++    writel(0, IRQ_VIRT_BASE | 0x1c);
++/* CPU Timer1 Reload Register */
++    writel(20000000, TIMER_VIRT_BASE | 0x18);
++/* CPU Timers Control Register */
++    writel(readl(TIMER_VIRT_BASE) | 12, TIMER_VIRT_BASE);
++
++/* GotoPowerSave */
++    writel((readl(CLOCK_GATING_CTRL) | (1 << 11)) & ~(1 << 12),
++           CLOCK_GATING_CTRL);
++
++/*  SDRAM Power Saving */
++    writel(0x7, DDR_OPERATION_BASE);
++    while(1){
++        arch_idle();
++        gpio_direction_output(38, (i++) % 25 != 0);
++        if(!gpio_get_value(42) || !gpio_get_value(43)) break;
++/* Mbus-L to Mbus Bridge Interrupt Cause Register */
++        writel(0, BRIDGE_CAUSE);
++    }
++    local_irq_enable();
++
++    setup_mm_for_reboot('h');
++    arch_reset('h', NULL);
++    mdelay(1000);
++    printk("reset failed: system halted\n");
++    while(1);
++}
++#endif
++
++static void __init lsxhl_init(void)
++{
++	/*
++	 * Basic setup. Needs to be called early.
++	 */
++	kirkwood_init();
++	kirkwood_mpp_conf(lsxhl_mpp_config);
++
++	kirkwood_uart0_init();
++
++        if (gpio_request(11, "USB Power Enable") != 0 ||
++            gpio_direction_output(11, 1) != 0)
++                printk(KERN_ERR "can't set up GPIO 11 (USB Power Enable)\n");
++        kirkwood_ehci_init();
++
++
++	kirkwood_ge00_init(&lsxhl_ge00_data);
++	kirkwood_ge01_init(&lsxhl_ge01_data);
++
++        kirkwood_sata_init(&lsxhl_sata_data);
++
++        kirkwood_spi_init();
++
++        platform_device_register(&lsxhl_leds);
++
++#if 0 /* power save in power-off mode. */
++        pm_power_off = lsxhl_power_off;
++#endif
++}
++
++MACHINE_START(LSXHL, "Buffalo LS-XHL Series")
++	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
++	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
++	.boot_params	= 0x00000100,
++	.init_machine	= lsxhl_init,
++	.map_io		= kirkwood_map_io,
++	.init_irq	= kirkwood_init_irq,
++	.timer		= &kirkwood_timer,
++MACHINE_END
+diff -uNr a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
+--- a/arch/arm/tools/mach-types	2010-08-02 00:11:14.000000000 +0200
++++ b/arch/arm/tools/mach-types	2010-10-05 19:57:48.000000000 +0200
+@@ -2647,7 +2647,7 @@
+ spear310		MACH_SPEAR310		SPEAR310		2660
+ spear320		MACH_SPEAR320		SPEAR320		2661
+ robotx			MACH_ROBOTX		ROBOTX			2662
+-lsxhl			MACH_LSXHL		LSXHL			2663
++lsxhl			MACH_LSXHL		LSXHL			527
+ smartlite		MACH_SMARTLITE		SMARTLITE		2664
+ cws2			MACH_CWS2		CWS2			2665
+ m619			MACH_M619		M619			2666

Documentation/nas-patches/nas/patches/lsproduo-2.6.34-2.patch

@@ -0,0 +1,472 @@
+Submitted By: Mario Fetka (geos_one) (mario dot fetka at gmail dot com)
+Date: 2010-06-27
+Initial Package Version: 2.6.30
+Origin: http://forum.buffalo.nas-central.org/viewtopic.php?f=18&t=11631&start=30
+Upstream Status: unknown
+Description: add support LS Pro Duo for 2.6.34 based on the 2.6.30 patch
+ 
+diff -Naur linux-2.6.34-geos_one-r1.orig/arch/arm/configs/orion5x_defconfig linux-2.6.34-geos_one-r1/arch/arm/configs/orion5x_defconfig
+--- linux-2.6.34-geos_one-r1.orig/arch/arm/configs/orion5x_defconfig	2010-06-27 06:56:25.464133418 +0000
++++ linux-2.6.34-geos_one-r1/arch/arm/configs/orion5x_defconfig	2010-06-27 06:58:47.423132623 +0000
+@@ -228,6 +228,7 @@
+ CONFIG_MACH_TERASTATION_PRO2=y
+ CONFIG_MACH_LINKSTATION_PRO=y
+ CONFIG_MACH_LINKSTATION_MINI=y
++CONFIG_MACH_LINKSTATION_PRODUO=y
+ CONFIG_MACH_LINKSTATION_LS_HGL=y
+ CONFIG_MACH_TS409=y
+ CONFIG_MACH_WRT350N_V2=y
+diff -Naur linux-2.6.34-geos_one-r1.orig/arch/arm/mach-orion5x/Kconfig linux-2.6.34-geos_one-r1/arch/arm/mach-orion5x/Kconfig
+--- linux-2.6.34-geos_one-r1.orig/arch/arm/mach-orion5x/Kconfig	2010-06-27 06:56:27.606130813 +0000
++++ linux-2.6.34-geos_one-r1/arch/arm/mach-orion5x/Kconfig	2010-06-27 06:57:40.438133825 +0000
+@@ -64,6 +64,44 @@
+ 	  Say 'Y' here if you want your kernel to support the
+ 	  Buffalo Linkstation LS-HGL platform.
+ 
++config MACH_LINKSTATION_PRODUO
++	bool "Buffalo Linkstation Pro Duo"
++	select I2C_BOARDINFO
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Buffalo Linkstation Pro Duo platform.
++	  
++	  LS-W1.0TGL/R1 is the general model number. There 
++	  is no /R3 models, as /R1 stands for RAID1.
++	  There are two hardware revisions of the product. 
++	
++	  The first revision has version 1.xx firmware, 64 MB RAM,  
++	  a single USB port, a power BUTTON, an Auto/Manual 
++	  power MODE SWITCH, and a RESET button.
++	
++	  The second revision has version 3.xx firmware, 128 MB RAM,  
++	  two USB ports, an Off/On/Auto power SWITCH, and a FUNCTION button. 
++
++	choice
++		prompt "HW model"
++		depends on MACH_LINKSTATION_PRODUO
++		default MACH_LINKSTATION_PRODUO_REV1
++		default MACH_LINKSTATION_PRODUO_REV2
++
++		config MACH_LINKSTATION_PRODUO_REV1
++		    bool "Revision 1"
++		    help
++		      The first revision has version 1.xx firmware, 64 MB RAM,  
++		      a single USB port, a power BUTTON, an Auto/Manual 
++		      power MODE SWITCH, and a RESET button.
++
++		config MACH_LINKSTATION_PRODUO_REV2
++		    bool "Revision 2"
++		    help
++		      The second revision has version 3.xx firmware, 128 MB RAM,  
++		      two USB ports, an Off/On/Auto power SWITCH, and a FUNCTION button. 
++	endchoice
++
+ config MACH_TS409
+ 	bool "QNAP TS-409"
+ 	help
+diff -Naur linux-2.6.34-geos_one-r1.orig/arch/arm/mach-orion5x/Makefile linux-2.6.34-geos_one-r1/arch/arm/mach-orion5x/Makefile
+--- linux-2.6.34-geos_one-r1.orig/arch/arm/mach-orion5x/Makefile	2010-06-27 06:56:27.581136017 +0000
++++ linux-2.6.34-geos_one-r1/arch/arm/mach-orion5x/Makefile	2010-06-27 07:04:02.631883167 +0000
+@@ -6,6 +6,7 @@
+ obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
+ obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o
+ obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
++obj-$(CONFIG_MACH_LINKSTATION_PRODUO) += lsproduo-setup.o
+ obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
+ obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o tsx09-common.o
+ obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o tsx09-common.o
+diff -Naur linux-2.6.34-geos_one-r1.orig/arch/arm/mach-orion5x/lsproduo-setup.c linux-2.6.34-geos_one-r1/arch/arm/mach-orion5x/lsproduo-setup.c
+--- linux-2.6.34-geos_one-r1.orig/arch/arm/mach-orion5x/lsproduo-setup.c	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.34-geos_one-r1/arch/arm/mach-orion5x/lsproduo-setup.c	2010-06-27 06:57:40.441886174 +0000
+@@ -0,0 +1,391 @@
++/*
++ * arch/arm/mach-orion5x/lsproduo-setup.c
++ *
++ * Source taken from arch/arm/mach-orion5x/lsmini-setup.c - kernel 2.6.30
++ * Maintainer: Manuel Bernhardt <prodigy7@gmail.com>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/pci.h>
++#include <linux/mtd/physmap.h>
++#include <linux/mv643xx_eth.h>
++#include <linux/leds.h>
++#include <linux/gpio_keys.h>
++#include <linux/input.h>
++#include <linux/i2c.h>
++#include <linux/ata_platform.h>
++#include <asm/mach-types.h>
++#include <linux/gpio.h>
++#include <asm/mach/arch.h>
++#include "common.h"
++#include "mpp.h"
++#include "include/mach/system.h"
++#include <linux/module.h>
++#include <linux/proc_fs.h>
++#include <asm/uaccess.h>
++
++/*****************************************************************************
++ * Linkstation Pro Duo Info
++ ****************************************************************************/
++
++/*
++ * 256K NOR flash Device bus boot chip select
++ */
++
++#define LSPRODUO_NOR_BOOT_BASE	0xf4000000
++#define LSPRODUO_NOR_BOOT_SIZE	SZ_256K
++
++/*****************************************************************************
++ * 256KB NOR Flash on BOOT Device
++ ****************************************************************************/
++
++static struct physmap_flash_data lsproduo_nor_flash_data = {
++	.width		= 1,
++};
++
++static struct resource lsproduo_nor_flash_resource = {
++	.flags	= IORESOURCE_MEM,
++	.start	= LSPRODUO_NOR_BOOT_BASE,
++	.end	= LSPRODUO_NOR_BOOT_BASE + LSPRODUO_NOR_BOOT_SIZE - 1,
++};
++
++static struct platform_device lsproduo_nor_flash = {
++	.name			= "physmap-flash",
++	.id			= 0,
++	.dev		= {
++		.platform_data	= &lsproduo_nor_flash_data,
++	},
++	.num_resources		= 1,
++	.resource		= &lsproduo_nor_flash_resource,
++};
++
++/*****************************************************************************
++ * Ethernet
++ ****************************************************************************/
++
++static struct mv643xx_eth_platform_data lsproduo_eth_data = {
++	.phy_addr	= 8,
++};
++
++/*****************************************************************************
++ * RTC 5C372a on I2C bus
++ ****************************************************************************/
++
++static struct i2c_board_info __initdata lsproduo_i2c_rtc = {
++	I2C_BOARD_INFO("rs5c372a", 0x32),
++};
++
++/*****************************************************************************
++ * LEDs attached to GPIO
++ ****************************************************************************/
++
++#define LSPRODUO_GPIO_LED_ALARM	2
++#define LSPRODUO_GPIO_LED_INFO	3
++#define LSPRODUO_GPIO_LED_PWR	0
++
++static struct gpio_led lsproduo_led_pins[] = {
++	{
++		.name	   = "alarm:red",
++		.gpio	   = LSPRODUO_GPIO_LED_ALARM,
++		.active_low     = 1,
++	}, {
++		.name	   = "info:amber",
++		.gpio	   = LSPRODUO_GPIO_LED_INFO,
++		.active_low     = 1,
++	}, {
++		.name	   = "power:amber",
++		.gpio	   = LSPRODUO_GPIO_LED_PWR,
++		.active_low     = 1,
++	},
++};
++
++static struct gpio_led_platform_data lsproduo_led_data = {
++	.leds	   = lsproduo_led_pins,
++	.num_leds       = ARRAY_SIZE(lsproduo_led_pins),
++};
++
++static struct platform_device lsproduo_leds = {
++	.name   = "leds-gpio",
++	.id     = -1,
++	.dev    = {
++		.platform_data  = &lsproduo_led_data,
++	},
++};
++
++/****************************************************************************
++ * GPIO Attached Keys
++ ****************************************************************************/
++
++#define LSPRODUO_GPIO_KEY_POWER		8
++#define LSPRODUO_GPIO_KEY_AUTOPOWER	10
++
++#define LSPRODUO_SW_POWER		0x00
++#define LSPRODUO_SW_AUTOPOWER		0x01
++
++static struct gpio_keys_button lsproduo_buttons[] = {
++	{
++		.type		= EV_SW,
++		.code	   = LSPRODUO_SW_POWER,
++		.gpio	   = LSPRODUO_GPIO_KEY_POWER,
++		.desc	   = "Power-on Switch",
++		.active_low     = 1,
++	}, {
++		.type		= EV_SW,
++		.code	   = LSPRODUO_SW_AUTOPOWER,
++		.gpio	   = LSPRODUO_GPIO_KEY_AUTOPOWER,
++		.desc	   = "Power-auto Switch",
++		.active_low     = 1,
++	},
++};
++
++static struct gpio_keys_platform_data lsproduo_button_data = {
++	.buttons	= lsproduo_buttons,
++	.nbuttons       = ARRAY_SIZE(lsproduo_buttons),
++};
++
++static struct platform_device lsproduo_button_device = {
++	.name	   = "gpio-keys",
++	.id	     = -1,
++	.num_resources  = 0,
++	.dev	    = {
++		.platform_data  = &lsproduo_button_data,
++	},
++};
++
++/****************************************************************************
++ * GPIO Attached Fan
++ ****************************************************************************/
++
++/* Define max char len */
++#define MAX_LEN 8
++
++#define LSPRODUO_GPIO_FAN_LOW		17
++#define LSPRODUO_GPIO_FAN_HIGH		14
++
++static struct proc_dir_entry *lsproduo_proc_dir_root, *lsproduo_proc_dir_gpio, *lsproduo_fan_proc_file;
++static char lsproduo_fan_state[MAX_LEN];
++
++static int lsproduo_fan_get(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++{
++	int len;
++
++	len = snprintf(buf, count, "state: %s\n", lsproduo_fan_state);
++	return len;
++}
++
++static int lsproduo_fan_set( struct file *file, const char *buffer, unsigned long count, void *data )
++{
++	int len, ret;
++	char *ptr, tState[MAX_LEN];
++
++	if (count > MAX_LEN )
++	    len = MAX_LEN;
++	else
++	    len = count;
++
++	ret = copy_from_user(tState, buffer, len);
++	if(ret < 0)
++	{
++	    printk(KERN_ERR "%s: Setting fan speed failed\n", "lsproduo");
++	    return -EFAULT;
++	}
++
++	ptr = strrchr(tState, '\n');
++	if(ptr) *ptr = '\0';
++
++	if (strcasecmp(tState, "off") == 0)
++	{
++	    printk(KERN_DEBUG "%s: set fan off\n", "lsproduo");
++	    sprintf(lsproduo_fan_state, "off");
++	    gpio_set_value(LSPRODUO_GPIO_FAN_LOW, 1);
++	    gpio_set_value(LSPRODUO_GPIO_FAN_HIGH, 1); 
++	} else if (strcasecmp(tState, "slow") == 0)
++	{
++	    printk(KERN_DEBUG "%s: set fan slow\n", "lsproduo");
++	    sprintf(lsproduo_fan_state, "slow");
++	    gpio_set_value(LSPRODUO_GPIO_FAN_LOW, 1);
++	    gpio_set_value(LSPRODUO_GPIO_FAN_HIGH, 0);
++	} else if (strcasecmp(tState, "fast") == 0)
++	{
++	    printk(KERN_DEBUG "%s: set fan fast\n", "lsproduo");
++	    sprintf(lsproduo_fan_state, "fast");
++	    gpio_set_value(LSPRODUO_GPIO_FAN_LOW, 0);
++	    gpio_set_value(LSPRODUO_GPIO_FAN_HIGH, 1);
++	} else if (strcasecmp(tState, "full") == 0)
++	{
++	    printk(KERN_DEBUG "%s: set fan full\n", "lsproduo");
++	    sprintf(lsproduo_fan_state, "full");
++	    gpio_set_value(LSPRODUO_GPIO_FAN_LOW, 0);
++	    gpio_set_value(LSPRODUO_GPIO_FAN_HIGH, 0);
++	} else
++	{
++	    printk(KERN_ERR "%s: unknown fan speed given\n", "lsproduo");
++	}
++
++	lsproduo_fan_state[len] = '\0';
++
++	return len;
++}
++
++/*****************************************************************************
++ * SATA
++ ****************************************************************************/
++static struct mv_sata_platform_data lsproduo_sata_data = {
++	.n_ports	= 2,
++};
++
++
++/*****************************************************************************
++ * Linkstation Pro Duo specific power off method: reboot
++ ****************************************************************************/
++/*
++ * On the Linkstation Pro Duo, the shutdown process is following:
++ * - Userland monitors key events until the power switch goes to off position
++ * - The board reboots
++ * - U-boot starts and goes into an idle mode waiting for the user
++ *   to move the switch to ON position
++ */
++
++static void lsproduo_power_off(void)
++{
++	arch_reset(0, NULL);
++}
++
++
++/*****************************************************************************
++ * General Setup
++ ****************************************************************************/
++
++#define LSPRODUO_GPIO_USB_POWER		9
++#define LSPRODUO_GPIO_AUTO_POWER	10
++#define LSPRODUO_GPIO_POWER		8
++
++#define LSPRODUO_GPIO_HDD_POWER0	1
++
++#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV2
++#define LSPRODUO_GPIO_USB_POWER2	19
++#endif
++
++static struct orion5x_mpp_mode lsproduo_mpp_modes[] __initdata = {
++	{  0, MPP_GPIO },	/* LED_PWR */
++	{  1, MPP_GPIO },	/* HDD_PWR */
++	{  2, MPP_GPIO },	/* LED_ALARM */
++	{  3, MPP_GPIO },	/* LED_INFO */
++	{  4, MPP_UNUSED },
++	{  5, MPP_UNUSED },
++	{  6, MPP_GPIO },	/* FAN_LCK */
++	{  7, MPP_GPIO },	/* INIT */
++	{  8, MPP_GPIO },	/* POWER */
++	{  9, MPP_GPIO },	/* USB_PWR */
++	{ 10, MPP_GPIO },	/* AUTO_POWER */
++	{ 11, MPP_UNUSED },	/* LED_ETH dummy */
++	{ 12, MPP_UNUSED },
++	{ 13, MPP_UNUSED },
++	{ 14, MPP_GPIO },	/* FAN_HIGH */
++	{ 15, MPP_UNUSED },
++	{ 16, MPP_UNUSED },
++	{ 17, MPP_GPIO },	/* FAN_LOW */
++	{ 18, MPP_UNUSED },
++#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV1
++	{ 19, MPP_UNUSED },
++#endif
++#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV2
++	{ 19, MPP_GPIO },	/* USB_PWR2 */
++#endif
++	{ -1 },
++};
++
++static void __init lsproduo_init(void)
++{
++	/*
++	 * Setup basic Orion functions. Need to be called early.
++	 */
++	orion5x_init();
++
++	orion5x_mpp_conf(lsproduo_mpp_modes);
++
++	/*
++	 * Configure peripherals.
++	 */
++	orion5x_ehci0_init();
++	orion5x_ehci1_init();
++	orion5x_eth_init(&lsproduo_eth_data);
++	orion5x_i2c_init();
++	orion5x_sata_init(&lsproduo_sata_data);
++	orion5x_uart0_init();
++	orion5x_xor_init();
++
++	orion5x_setup_dev_boot_win(LSPRODUO_NOR_BOOT_BASE,
++				   LSPRODUO_NOR_BOOT_SIZE);
++	platform_device_register(&lsproduo_nor_flash);
++
++	platform_device_register(&lsproduo_button_device);
++
++	platform_device_register(&lsproduo_leds);
++
++	i2c_register_board_info(0, &lsproduo_i2c_rtc, 1);
++
++	/* enable USB power */
++	gpio_set_value(LSPRODUO_GPIO_USB_POWER, 1);
++
++#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV2
++	gpio_set_value(LSPRODUO_GPIO_USB_POWER2, 1);
++#endif
++
++	printk(KERN_INFO "Buffalo Linkstation Pro Duo fan driver loaded\n");
++	sprintf(lsproduo_fan_state, "full");
++	gpio_set_value(LSPRODUO_GPIO_FAN_LOW, 0);
++	gpio_set_value(LSPRODUO_GPIO_FAN_HIGH, 0);
++
++	lsproduo_proc_dir_root = proc_mkdir( "linkstation", NULL );
++	lsproduo_proc_dir_gpio = proc_mkdir( "gpio", lsproduo_proc_dir_root );
++	lsproduo_fan_proc_file = create_proc_entry( "fan", S_IRUGO, lsproduo_proc_dir_gpio );
++	if( lsproduo_fan_proc_file ) {
++	    lsproduo_fan_proc_file->read_proc  = lsproduo_fan_get;
++	    lsproduo_fan_proc_file->write_proc = lsproduo_fan_set;
++	    lsproduo_fan_proc_file->data = NULL;
++	} else
++	{
++	    printk(KERN_INFO "Registration of fan device failed\n");
++	}
++
++	/* register power-off method */
++	pm_power_off = lsproduo_power_off;
++
++	pr_info("%s: finished\n", __func__);
++}
++
++#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV1
++MACHINE_START(LINKSTATION_PRODUO, "Buffalo Linkstation Pro Duo - Revision 1")
++	/* Maintainer: Manuel Bernhardt <prodigy7@gmail.com> */
++	.phys_io	= ORION5X_REGS_PHYS_BASE,
++	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
++	.boot_params	= 0x00000100,
++	.init_machine	= lsproduo_init,
++	.map_io		= orion5x_map_io,
++	.init_irq	= orion5x_init_irq,
++	.timer		= &orion5x_timer,
++	.fixup		= tag_fixup_mem32,
++MACHINE_END
++#endif
++
++#ifdef CONFIG_MACH_LINKSTATION_PRODUO_REV2
++MACHINE_START(LINKSTATION_PRODUO, "Buffalo Linkstation Pro Duo - Revision 2")
++	/* Maintainer: Manuel Bernhardt <prodigy7@gmail.com> */
++	.phys_io	= ORION5X_REGS_PHYS_BASE,
++	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
++	.boot_params	= 0x00000100,
++	.init_machine	= lsproduo_init,
++	.map_io		= orion5x_map_io,
++	.init_irq	= orion5x_init_irq,
++	.timer		= &orion5x_timer,
++	.fixup		= tag_fixup_mem32,
++MACHINE_END
++#endif
++

Documentation/nas-patches/nas/patches/patch.lswxl

@@ -0,0 +1,254 @@
+--- a/arch/arm/mach-kirkwood/include/mach/system.h	2010-02-09 20:57:19.000000000 +0800
++++ b/arch/arm/mach-kirkwood/include/mach/system.h	2010-08-03 19:01:14.000000000 +0800
+@@ -9,6 +9,8 @@
+ #ifndef __ASM_ARCH_SYSTEM_H
+ #define __ASM_ARCH_SYSTEM_H
+ 
++#include <linux/io.h>
++#include <asm/proc-fns.h>
+ #include <mach/bridge-regs.h>
+ 
+ static inline void arch_idle(void)
+--- a/arch/arm/mach-kirkwood/Kconfig	2010-02-09 20:57:19.000000000 +0800
++++ b/arch/arm/mach-kirkwood/Kconfig	2010-08-04 10:34:53.000000000 +0800
+@@ -87,6 +87,12 @@
+ 	  Say 'Y' here if you want your kernel to support the
+ 	  HP t5325 Thin Client.
+ 
++config MACH_LSWXL
++	bool "Buffalo LS-WXL Series"
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Buffalo LS-WXL Series.
++
+ endmenu
+ 
+ endif
+--- a/arch/arm/mach-kirkwood/lswxl-setup.c	1970-01-01 07:30:00.000000000 +0730
++++ b/arch/arm/mach-kirkwood/lswxl-setup.c	2010-08-04 11:30:13.000000000 +0800
+@@ -0,0 +1,183 @@
++/*
++ * arch/arm/mach-kirkwood/lswxl-setup.c
++ *
++ * Buffalo LS Kirkwood Series Setup
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/kernel.h>
++#include <linux/gpio.h>
++#include <linux/gpio_keys.h>
++#include <linux/init.h>
++#include <linux/input.h>
++#include <linux/leds.h>
++#include <linux/platform_device.h>
++#include <linux/ata_platform.h>
++#include <linux/mv643xx_eth.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include "include/mach/system.h"
++#include <mach/kirkwood.h>
++#include "common.h"
++#include "mpp.h"
++
++static struct mv643xx_eth_platform_data lswxl_ge00_data = {
++	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
++};
++
++static struct mv643xx_eth_platform_data lswxl_ge01_data = {
++	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
++};
++
++static unsigned int lswxl_mpp_config[] __initdata = {
++	MPP8_GPIO,  /* HDD1 Error LED */
++	MPP28_GPIO, /* HDD1 Power */
++	MPP29_GPIO, /* HDD2 Power */
++	MPP34_GPIO, /* FUNC2 LED */
++	MPP36_GPIO, /* FUNC1 LED */
++	MPP37_GPIO, /* USB Vbus Power */ 
++	MPP38_GPIO, /* INFO LED */
++	MPP39_GPIO, /* POWER LED */
++	MPP40_GPIO, /* FAN Status */
++	MPP41_GPIO, /* FUNC Switch */
++	MPP42_GPIO, /* POWER Switch */
++	MPP43_GPIO, /* AUTO-POWER Switch*/
++	MPP46_GPIO, /* HDD1 Error LED*/
++	MPP47_GPIO, /* FAN High */
++	MPP48_GPIO, /* FAN Low  */
++	MPP49_GPIO, /* ALARM LED */
++	0
++};
++
++static struct mv_sata_platform_data lswxl_sata_data = {
++	.n_ports	= 2,
++};
++
++static struct gpio_led lswxl_led_pins[] = {
++	{
++		.name			= "func1",
++		.gpio			= 36,
++		.active_low		= 1,
++	},
++	{
++		.name			= "func2",
++		.gpio			= 34,
++		.active_low		= 0,
++	},
++	{
++		.name			= "alarm",
++		.gpio			= 49,
++		.active_low		= 1,
++	},
++	{
++		.name			= "info",
++		.gpio			= 38,
++		.active_low		= 1,
++	},
++	{
++		.name			= "power",
++		.gpio			= 39,
++		.default_trigger 	= "default-on",
++		.active_low		= 0,
++	},
++	{
++		.name			= "hdd1",
++		.gpio			= 8,
++		.active_low		= 0,
++	},
++	{
++		.name			= "hdd2",
++		.gpio			= 46,
++		.active_low		= 0,
++	},
++};
++
++static struct gpio_led_platform_data lswxl_led_data = {
++	.leds		= lswxl_led_pins,
++	.num_leds	= ARRAY_SIZE(lswxl_led_pins),
++};
++
++static struct platform_device lswxl_leds = {
++	.name	= "leds-gpio",
++	.id	= -1,
++	.dev	= {
++		.platform_data	= &lswxl_led_data,
++	}
++};
++
++#define LSWXL_GPIO_USB_VBUS_EN		37
++#define LSWXL_GPIO_KEY_FUNC		41
++
++static struct gpio_keys_button lswxl_buttons[] = {
++	{
++		.code		= KEY_OPTION,
++		.gpio		= LSWXL_GPIO_KEY_FUNC,
++		.desc		= "Function Button",
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_platform_data lswxl_button_data = {
++	.buttons	= lswxl_buttons,
++	.nbuttons	= ARRAY_SIZE(lswxl_buttons),
++};
++
++static struct platform_device lswxl_button_device = {
++	.name		= "gpio-keys",
++	.id		= -1,
++	.num_resources	= 0,
++	.dev		= {
++		.platform_data	= &lswxl_button_data,
++	},
++};
++
++static void lswxl_power_off(void)
++{
++	arch_reset(0, NULL);
++}
++
++static void __init lswxl_init(void)
++{
++	/*
++	 * Basic setup. Needs to be called early.
++	 */
++	kirkwood_init();
++	kirkwood_mpp_conf(lswxl_mpp_config);
++
++	kirkwood_uart0_init();
++
++	if (gpio_request(LSWXL_GPIO_USB_VBUS_EN, "USB Power Enable") != 0 ||
++		gpio_direction_output(LSWXL_GPIO_USB_VBUS_EN, 1) != 0)
++		printk(KERN_ERR "can't set up USB Power Enable\n");
++	kirkwood_ehci_init();
++
++	kirkwood_ge00_init(&lswxl_ge00_data);
++	kirkwood_ge01_init(&lswxl_ge01_data);
++
++	kirkwood_sata_init(&lswxl_sata_data);
++
++	kirkwood_spi_init();
++
++	platform_device_register(&lswxl_leds);
++	platform_device_register(&lswxl_button_device);
++	
++	/* register power-off method */
++	pm_power_off = lswxl_power_off;
++
++	pr_info("%s: finished\n", __func__);
++}
++
++
++
++MACHINE_START(LSWXL, "Buffalo LS-WXL")
++	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
++	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
++	.boot_params	= 0x00000100,
++	.init_machine	= lswxl_init,
++	.map_io		= kirkwood_map_io,
++	.init_irq	= kirkwood_init_irq,
++	.timer		= &kirkwood_timer,
++MACHINE_END
+--- a/arch/arm/mach-kirkwood/Makefile	2010-02-09 20:57:19.000000000 +0800
++++ b/arch/arm/mach-kirkwood/Makefile	2010-08-04 10:40:43.000000000 +0800
+@@ -11,5 +11,6 @@
+ obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o
+ obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
+ obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
++obj-$(CONFIG_MACH_LSWXL)		+= lswxl-setup.o
+ 
+ obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
+--- a/arch/arm/tools/mach-types	2010-02-09 20:57:19.000000000 +0800
++++ b/arch/arm/tools/mach-types	2010-08-04 11:19:52.000000000 +0800
+@@ -541,6 +541,7 @@
+ av3xx			MACH_AV3XX		AV3XX			525
+ avila			MACH_AVILA		AVILA			526
+ pxa_mpm10		MACH_PXA_MPM10		PXA_MPM10		527
++lswxl			MACH_LSWXL		LSWXL			527
+ pxa_kyanite		MACH_PXA_KYANITE	PXA_KYANITE		528
+ sgold			MACH_SGOLD		SGOLD			529
+ oscar			MACH_OSCAR		OSCAR			530
+--- a/arch/arm/mach-kirkwood/common.c	2010-08-05 03:02:22.000000000 +0000
++++ b/arch/arm/mach-kirkwood/common.c	2010-08-05 03:02:22.000000000 +0000
+@@ -32,6 +32,7 @@
+ #include <plat/orion_nand.h>
+ #include <plat/orion_wdt.h>
+ #include <plat/time.h>
++#include <asm/mach-types.h>
+ #include "common.h"
+ 
+ /*****************************************************************************
+@@ -853,9 +854,10 @@
+ 
+ 	kirkwood_pcie_id(&dev, &rev);
+ 
+-	if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
++	if (((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
+ 					rev == MV88F6281_REV_A1)) ||
+-	    (dev == MV88F6282_DEV_ID))
++	    (dev == MV88F6282_DEV_ID)) &&
++	    !machine_is_lswxl())		/* LS-WXL is underclocked */
+ 		return 200000000;
+ 
+ 	return 166666667;

licenses/ejre-6

@@ -0,0 +1,163 @@
+<html>
+<head>
+<title>Java SE for Embedded 6</title>
+<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
+<link rel="stylesheet" href="css/default.css">
+</head>
+
+
+<body leftmargin="0" topmargin="0" marginheight="0" marginwidth="0" rightmargin="10" bgcolor="#ffffff">
+<a name="top"></a>
+<div class="vnv1sunlogo"><a href="http://www.sun.com/"><img src="css/vnv1_sunlogo.gif" alt="sun.com"  border="0"></a></div>
+
+<table border="0" cellpadding="0" cellspacing="0" width="100%">
+<tbody><tr>
+<td width="100%"><div class="breadcrumb">EmbeddedCopyright.html</div></td>
+
+<td valign="right" nowrap="nowrap"><div class="breadcrumb">June 10, 2010</div></td></tr>
+</tbody>
+</table>
+
+<span class="sp20">&nbsp;</span><br>
+<!-- BEGIN PAGETITLE -->
+<div class="pagetitle2">Copyright</div>
+<div class="pagetitle">Java SE for Embedded 6</div>
+<!-- END PAGETITLE -->
+
+
+<table border="0" cellpadding="0" cellspacing="0" width="100%">
+<tbody><tr>
+<td><img src="css/a.gif" width="10" height="1" border="0" alt=" "></td>
+
+<td><span class="sp10">&nbsp;</span><br><!-- MAIN CONTENT -->
+
+
+<!-- BEGIN FRAGMENT | HR TAG -->
+<div class="contentdivider"><table border="0" cellpadding="0" cellspacing="0" width="100%" class="grey4"><tbody><tr><td><img src="css/a.gif" width="1" height="4" border="0" alt=" "></td></tr></tbody></table></div>
+<!-- END FRAGMENT | HR TAG -->
+
+
+<!--startindex-->
+
+</p>
+<p>Copyright</a> &copy; 1993, 2010, Oracle Corporation and/or its affiliates. All rights reserved.</p>
+<p>This software and related documentation are provided under a license agreement
+containing restrictions on use and disclosure and are protected by intellectual property
+laws. Except as expressly permitted in your license agreement or allowed by law, you
+may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute,
+exhibit, perform, publish, or display any part, in any form, or by any means. Reverse
+engineering, disassembly, or decompilation of this software, unless required by law for
+interoperability, is prohibited.</p>
+
+<p>The information contained herein is subject to change without notice and is not warranted
+to be error-free. If you find any errors, please report them to us in writing.</p>
+
+<p>If this is software or related software documentation that is delivered to the U.S.
+Government or anyone licensing it on behalf of the U.S. Government, the following
+notice is applicable:</p>
+
+<p>U.S. GOVERNMENT RIGHTS
+Programs, software, databases, and related documentation and technical data delivered to 
+U.S. Government customers are "commercial computer software" or "commercial technical data"
+pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental
+regulations. As such, the use, duplication, disclosure, modification, and adaptation shall
+be subject to the restrictions and license terms set forth in the applicable Government
+contract, and, to the extent applicable by the terms of the Government contract, the 
+additional rights set forth in FAR 52.227-19, Commercial Computer Software License 
+(December 2007). Oracle America, Inc., 500 Oracle Parkway, Redwood City, CA 94065.</p>
+
+<p>This software or hardware is developed for general use in a variety of information
+management applications. It is not developed or intended for use in any inherently
+dangerous applications, including applications which may create a risk of personal injury.
+If you use this software or hardware in dangerous applications, then you shall be
+responsible to take all appropriate fail-safe, backup, redundancy, and other measures to
+ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any
+damages caused by use of this software or hardware in dangerous applications.</p>
+
+<p>Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names
+may be trademarks of their respective owners.</p>
+
+<p>AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered
+trademarks of Advanced Micro Devices. Intel and Intel Xeon are trademarks or registered
+trademarks of Intel Corporation. All SPARC trademarks are used under license and are
+trademarks or registered trademarks of SPARC International, Inc. UNIX is a registered
+trademark licensed through X/Open Company, Ltd.</p>
+
+<p>This software or hardware and documentation may provide access to or information on
+content, products, and services from third parties. Oracle Corporation and its affiliates
+are not responsible for and expressly disclaim all warranties of any kind with respect to
+third-party content, products, and services. Oracle Corporation and its affiliates will
+not be responsible for any loss, costs, or damages incurred due to your access to or use
+of third-party content, products, or services.</p>
+
+<p>Copyright © 1993, 2010, Oracle et/ou ses affiliés. Tous droits réservés.</p>
+
+<p>Ce logiciel et la documentation qui l'accompagne sont protégés par les lois sur la
+propriété intellectuelle. Ils sont concédés sous licence et soumis à des restrictions
+d'utilisation et de divulgation. Sauf disposition de votre contrat de licence ou de la loi,
+vous ne pouvez pas copier, reproduire, traduire, diffuser, modifier, breveter, transmettre,
+distribuer, exposer, exécuter, publier ou afficher le logiciel, même partiellement, sous
+quelque forme et par quelque procédé que ce soit. Par ailleurs, il est interdit de
+procéder à toute ingénierie inverse du logiciel, de le désassembler ou de le décompiler,
+excepté à des fins d'interopérabilité avec des logiciels tiers ou tel que prescrit par
+la loi.</p>
+
+<p>Les informations fournies dans ce document sont susceptibles de modification sans préavis.
+Par ailleurs, Oracle Corporation ne garantit pas qu'elles soient exemptes d'erreurs et vous
+invite, le cas échéant, à lui en faire part par écrit.</p>
+
+<p>Si ce logiciel, ou la documentation qui l'accompagne, est concédé sous licence au
+Gouvernement des Etats-Unis, ou à toute entité qui délivre la licence de ce logiciel ou
+l'utilise pour le compte du Gouvernement des Etats-Unis, la notice suivante s'applique :</p>
+
+<p>U.S. GOVERNMENT RIGHTS
+Programs, software, databases, and related documentation and technical data delivered to
+U.S. Government customers are "commercial computer software" or "commercial technical data"
+pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental
+regulations.  As such, the use, duplication, disclosure, modification, and adaptation shall
+be subject to the restrictions and license terms set forth in the applicable Government
+contract, and, to the extent applicable by the terms of the Government contract, the
+additional rights set forth in FAR 52.227-19, Commercial Computer Software License 
+(December 2007).  Oracle America, Inc., 500 Oracle Parkway, Redwood City, CA 94065.</p>
+
+<p>Ce logiciel ou matériel a été développé pour un usage général dans le cadre d'applications
+de gestion des informations. Ce logiciel ou matériel n'est pas conçu ni n'est destiné à être
+utilisé dans des applications à risque, notamment dans des applications pouvant causer des
+dommages corporels. Si vous utilisez ce logiciel ou matériel dans le cadre 
+d'applications dangereuses, il est de votre responsabilité de prendre toutes les mesures de
+secours, de sauvegarde, de redondance et autres mesures nécessaires à son utilisation
+dans des conditions optimales de sécurité. Oracle Corporation et ses affiliés déclinent
+toute responsabilité quant aux dommages causés par l'utilisation de ce logiciel ou matériel
+pour ce type d'applications.</p>
+
+<p>Oracle et Java sont des marques déposées d'Oracle Corporation et/ou de ses affiliés. Tout
+autre nom mentionné peut correspondre à des marques appartenant à d'autres
+propriétaires qu'Oracle.</p>
+
+<p>AMD, Opteron, le logo AMD et le logo AMD Opteron sont des marques ou des marques
+déposées d'Advanced Micro Devices. Intel et Intel Xeon sont des marques ou des
+marques déposées d'Intel Corporation. Toutes les marques SPARC sont utilisées sous
+licence et sont des marques ou des marques déposées de SPARC International, Inc.
+UNIX est une marque déposée concédée sous licence par X/Open Company, Ltd.</p>
+
+<p>Ce logiciel ou matériel et la documentation qui l'accompagne peuvent fournir des
+informations ou des liens donnant accès à des contenus, des produits et des services
+émanant de tiers. Oracle Corporation et ses affiliés déclinent toute responsabilité ou
+garantie expresse quant aux contenus, produits ou services émanant de tiers. En aucun
+cas, Oracle Corporation et ses affiliés ne sauraient être tenus pour responsables des pertes
+subies, des coûts occasionnés ou des dommages causés par l'accès à des contenus,
+produits ou services tiers, ou à leur utilisation.</p>
+
+
+<!--stopindex-->
+
+<!-- BEGIN FRAGMENT | HR TAG -->
+<div class="contentdivider"><table border="0" cellpadding="0" cellspacing="0" width="100%" class="grey4"><tbody><tr><td><img src="css/a.gif" width="1" height="4" border="0" alt=" "></td></tr></tbody></table></div>
+<!-- END FRAGMENT | HR TAG -->
+
+</td>
+<td><img src="css/a.gif" width="10" height="1" border="0" alt=" "></td></tr>
+</tbody></table>
+
+</body>
+</html>