overlay/eclass/nas-kernel.eclass

# Copyright 2004-2010 Sabayon Project
# Distributed under the terms of the GNU General Public License v2
# $

# @ECLASS-VARIABLE: K_NASPATCHES_VER
# @DESCRIPTION:
# The version of the sablink patches tarball(s) to apply.
# A value of "5" would apply 2.6.12-5 to my-sources-2.6.12.ebuild

# @ECLASS-VARIABLE: K_NASKERNEL_NAME
# @DESCRIPTION:
# The kernel name used by the ebuild, it should be the ending ${PN} part
# for example, of linux-sablink it is "${PN/${PN/-*}-}" (sablink)
K_NASKERNEL_NAME="${K_NASKERNEL_NAME:-${PN/${PN/-*}-}}"

# @ECLASS-VARIABLE: K_NASKERNEL_URI_CONFIG
# @DESCRIPTION:
# Set this either to "no" or "yes" depending on the location of the
# kernel config files.  If they are inside FILESDIR (old location)
# leave this option set to "no", otherwise set this to "yes"
K_NASKERNEL_URI_CONFIG="${K_NASKERNEL_URI_CONFIG:-no}"

# @ECLASS-VARIABLE: K_NASKERNEL_SELF_TARBALL_NAME
# @DESCRIPTION:
# If the main kernel sources tarball is generated in-house and available
# on the "sablink" mirror, set this variable to the extension name (see example
# below). This will disable ALL the extra/local patches (since they have to
# be applied inside the tarball). Moreover, K_NASKERNEL_URI_CONFIG,
# K_NASPATCHES_VER, K_NASKERNEL_NAME, K_KERNEL_PATCH_VER will be ignored.
# Example:
#   K_NASKERNEL_SELF_TARBALL_NAME="sablink"
#   This would generate:
#   SRC_URI="mirror://sablink/sys-kernel/linux-${PV}+sablink.tar.bz2"
K_NASKERNEL_SELF_TARBALL_NAME="${K_NASKERNEL_SELF_TARBALL_NAME:-}"

# @ECLASS-VARIABLE: K_NASKERNEL_FORCE_SUBLEVEL
# @DESCRIPTION:
# Force the rewrite of SUBLEVEL in kernel sources Makefile
K_NASKERNEL_FORCE_SUBLEVEL="${K_NASKERNEL_FORCE_SUBLEVEL:-}"

# @ECLASS-VARIABLE: K_NASKERNEL_RESET_EXTRAVERSION
# @DESCRIPTION:
# Force the rewrite of EXTRAVERSION in kernel sources Makefile (setting it to "")
K_NASKERNEL_RESET_EXTRAVERSION="${K_NASKERNEL_RESET_EXTRAVERSION:-}"

# @ECLASS-VARIABLE: K_NASKERNEL_LONGTERM
# @DESCRIPTION:
# Consider Kernel stable patchset as longterm (changing URL)
K_NASKERNEL_LONGTERM="${K_NASKERNEL_LONGTERM:-}"

# @ECLASS-VARIABLE: K_KERNEL_SOURCES_PKG
# @DESCRIPTION:
# The kernel sources package used to build this kernel binary
K_KERNEL_SOURCES_PKG="${K_KERNEL_SOURCES_PKG:-${CATEGORY}/${PN/*-}-sources-${PVR}}"

# @ECLASS-VARIABLE: K_KERNEL_PATCH_VER
# @DESCRIPTION:
# If set to "3" for example, it applies the upstream kernel
# patch corresponding to patch-${KV_MAJOR}.${KV_MINOR}.${KV_PATCH}.3.bz2
# @TODO: deprecate and remove once 2.6.x kernels are retired
K_KERNEL_PATCH_VER="${K_KERNEL_PATCH_VER:-}"

# @ECLASS-VARIABLE: K_KERNEL_PATCH_HOTFIXES
# @DESCRIPTION:
# If there is the need to quickly apply patches to the kernel
# without bumping the kernel patch tarball (for eg. in case
# of just released security fixes), set this variable in your ebuild
# pointing to space separated list of patch paths.
K_KERNEL_PATCH_HOTFIXES="${K_KERNEL_PATCH_HOTFIXES:-}"

# @ECLASS-VARIABLE: K_KERNEL_DISABLE_PR_EXTRAVERSION
# @DESCRIPTION:
# Set this to "1" if you want to tell kernel-2 eclass to
# not use ${PR} in kernel EXTRAVERSION (K_NOUSEPR). Otherwise, set
# this to "0" to not set K_NOUSEPR at all.
K_KERNEL_DISABLE_PR_EXTRAVERSION="${K_KERNEL_DISABLE_PR_EXTRAVERSION:-1}"

# @ECLASS-VARIABLE: K_KERNEL_SLOT_USEPVR
# @DESCRIPTION:
# Set this to "1" if you want to use ${PVR} in SLOT variable, instead of ${PV}
# sys-kernel/linux-vserver (vserver-sources) require this. This won't work for
# firmware pkgs.
K_KERNEL_SLOT_USEPVR="${K_KERNEL_SLOT_USEPVR:-0}"

# @ECLASS-VARIABLE: K_NASKERNEL_FIRMWARE
# @DESCRIPTION:
# Set this to "1" if your ebuild is a kernel firmware package
K_FIRMWARE_PACKAGE="${K_FIRMWARE_PACKAGE:-}"

# @ECLASS-VARIABLE: K_ONLY_SOURCES
# @DESCRIPTION:
# For every kernel binary package, there is a kernel source package associated
# if your ebuild is one of them, set this to "1"
K_ONLY_SOURCES="${K_ONLY_SOURCES:-}"

# @ECLASS-VARIABLE: K_REQUIRED_LINUX_FIRMWARE_VER
# @DESCRIPTION:
# Minimum required version of sys-kernel/linux-formware package, if any
K_REQUIRED_LINUX_FIRMWARE_VER="${K_REQUIRED_LINUX_FIRMWARE_VER:-}"

# @ECLASS-VARIABLE: K_WORKAROUND_SOURCES_COLLISION
# @DESCRIPTION:
# For kernel binary packages, Workaround file collisions with kernel
# sources already providing certain files (like Makefile). Used
# by linux-openvz and linux-vserver
K_WORKAROUND_SOURCES_COLLISION="${K_WORKAROUND_SOURCES_COLLISION:-}"

# @ECLASS-VARIABLE: K_WORKAROUND_USE_REAL_EXTRAVERSION
# @DESCRIPTION:
# Some kernel sources are shipped with their own EXTRAVERSION and
# we're kindly asked to not touch it, if this is your case, set
# this variable and depmod will work correctly.
K_WORKAROUND_USE_REAL_EXTRAVERSION="${K_WORKAROUND_USE_REAL_EXTRAVERSION:-}"

# @ECLASS-VARIABLE: K_GENKERNEL_ARGS
# @DESCRIPTION:
# Provide extra genkernel arguments using K_GENKERNEL_ARGS
K_GENKERNEL_ARGS="${K_GENKERNEL_ARGS:-}"

# @ECLASS-VARIABLE: K_MKIMAGE_RAMDISK_ADDRESS
# @DESCRIPTION:
# [ARM ONLY] Provide the ramdisk load address to be used with mkimage
K_MKIMAGE_RAMDISK_ADDRESS="${K_MKIMAGE_RAMDISK_ADDRESS:-}"

# @ECLASS-VARIABLE: K_MKIMAGE_RAMDISK_ENTRYPOINT
# @DESCRIPTION:
# [ARM ONLY] Provide the ramdisk entry point address to be used with mkimage
K_MKIMAGE_RAMDISK_ENTRYPOINT="${K_MKIMAGE_RAMDISK_ENTRYPOINT:-}"

KERN_INITRAMFS_SEARCH_NAME="${KERN_INITRAMFS_SEARCH_NAME:-initramfs-genkernel*${K_NASKERNEL_NAME}}"

# Disable deblobbing feature
K_DEBLOB_AVAILABLE=0
ETYPE="sources"

inherit eutils kernel-2 mount-boot linux-info

# from kernel-2 eclass
detect_version
detect_arch

DESCRIPTION="sablink Linux kernel functions and phases"


K_LONGTERM_URL_STR=""
if [ -n "${K_NASKERNEL_LONGTERM}" ]; then
	K_LONGTERM_URL_STR="/longterm/v${KV_MAJOR}.${KV_MINOR}.${KV_PATCH}"
fi

## kernel-2 eclass settings
if [ -n "${K_NASKERNEL_SELF_TARBALL_NAME}" ]; then
	SRC_URI="mirror://sablink/${CATEGORY}/linux-${PVR}+${K_NASKERNEL_SELF_TARBALL_NAME}.tar.bz2"
elif [ -n "${K_NASPATCHES_VER}" ]; then
	UNIPATCH_STRICTORDER="yes"
	K_NASPATCHES_PKG="nas-patches-${PV}-${K_NASPATCHES_VER}.tar.bz2"
	UNIPATCH_LIST="${DISTFILES}/${K_NASPATCHES_PKG}"
	SRC_URI="${KERNEL_URI}
		mirror://sablink/${CATEGORY}/linux-nas-patches/${K_NASPATCHES_PKG}"
else
	SRC_URI="${KERNEL_URI}"
fi

if [ -z "${K_NASKERNEL_SELF_TARBALL_NAME}" ]; then
	if [ -n "${K_KERNEL_PATCH_VER}" ]; then
		K_PATCH_NAME="patch-${KV_MAJOR}.${KV_MINOR}.${KV_PATCH}.${K_KERNEL_PATCH_VER}.bz2"
		SRC_URI="${SRC_URI}
			mirror://kernel/linux/kernel/v${KV_MAJOR}.${KV_MINOR}${K_LONGTERM_URL_STR}/${K_PATCH_NAME}"
		UNIPATCH_LIST="${DISTDIR}/${K_PATCH_NAME}
			${UNIPATCH_LIST}"
	fi
fi
if [ -n "${K_KERNEL_PATCH_HOTFIXES}" ]; then
	UNIPATCH_LIST="${K_KERNEL_PATCH_HOTFIXES} ${UNIPATCH_LIST}"
fi


_get_real_kv_full() {
	if [[ "${KV_MAJOR}${KV_MINOR}" -eq 26 ]]; then
		echo "${ORIGINAL_KV_FULL}"
	elif [[ "${OKV/.*}" = "3" ]]; then
		# Linux 3.x support, KV_FULL is set to: 3.0-sablink
		# need to add another final .0 to the version part
		# echo "${ORIGINAL_KV_FULL/-/.0-}"
		echo "${ORIGINAL_KV_FULL}"
	else
		echo "${ORIGINAL_KV_FULL}"
	fi
}

# replace "linux" with K_NASKERNEL_NAME, usually replaces
# "linux" with "sablink" or "server" or "openvz"
KV_FULL="${KV_FULL/${PN/-*}/${K_NASKERNEL_NAME}}"
EXTRAVERSION="${EXTRAVERSION/${PN/-*}/${K_NASKERNEL_NAME}}"
# drop -rX if exists
if [[ -n "${PR//r0}" ]] && [[ "${K_KERNEL_DISABLE_PR_EXTRAVERSION}" = "1" ]] \
		&& [[ -z "${K_NOSETEXTRAVERSION}" ]]; then
	EXTRAVERSION="${EXTRAVERSION%-r*}"
	KV_FULL="${KV_FULL%-r*}"
	KV="${KV%-r*}"
fi
# rewrite it
ORIGINAL_KV_FULL="${KV_FULL}"
KV_FULL="$(_get_real_kv_full)"

# Starting from linux-3.0, we still have to install
# sources stuff into /usr/src/linux-3.0.0-sablink (example)
# where the last part must always match uname -r
# otherwise kernel-switcher (and RELEASE_LEVEL file)
# will complain badly
KV_OUT_DIR="/usr/src/linux-${KV_FULL}"
S="${WORKDIR}/linux-${KV_FULL}"


if [ -n "${K_FIRMWARE_PACKAGE}" ]; then
	SLOT="0"
elif [ "${K_KERNEL_SLOT_USEPVR}" = "1" ]; then
	SLOT="${PVR}"
else
	SLOT="${PV}"
fi

_is_kernel_binary() {
	if [ -z "${K_ONLY_SOURCES}" ] && [ -z "${K_FIRMWARE_PACKAGE}" ]; then
		# yes it is
		return 0
	else
		# no it isn't
		return 1
	fi
}

# provide extra virtual pkg
if _is_kernel_binary; then
	PROVIDE="virtual/linux-binary"
fi

if [ -n "${K_NASKERNEL_SELF_TARBALL_NAME}" ]; then
	HOMEPAGE="http://gitweb.sablink.org/?p=linux/kernel/sablink.git;a=summary"
else
	HOMEPAGE="http://www.sablink.org"
fi

# set SRC_URI
if [ -z "${K_NASKERNEL_SELF_TARBALL_NAME}" ]; then
	if [ "${K_NASKERNEL_URI_CONFIG}" = "yes" ]; then
		tmp_K_NASKERNEL_CONFIG_FILE="${K_NASKERNEL_CONFIG_FILE:-${K_NASKERNEL_NAME}-${PVR}-__ARCH__.config}"
		tmp_K_NASKERNEL_FW_CONFIG_FILE="${K_NASKERNEL_FW_CONFIG_FILE:-${K_NASKERNEL_NAME}-fw_env-__ARCH__.config}"
		if [ -n "${K_NASCONFIGS_VER}" ]; then
			K_NASCONFIGS_PKG="nas-configs-${PV}-${K_NASCONFIGS_VER}.tar.bz2"
			SRC_URI="${SRC_URI}
				mirror://sablink/${CATEGORY}/linux-nas-configs/${K_NASCONFIGS_PKG}"
		else
			SRC_URI="${SRC_URI}
				arm? ( mirror://sablink/${CATEGORY}/linux-nas-patches/config/${tmp_K_NASKERNEL_FW_CONFIG_FILE/__ARCH__/arm} )"
		fi
		SRC_URI="${SRC_URI}
			arm? ( mirror://sablink/${CATEGORY}/linux-nas-patches/config/${tmp_K_NASKERNEL_FW_CONFIG_FILE/__ARCH__/arm} )"
		# K_NASKERNEL_CONFIG_FILE will be set in _set_config_file_vars
		unset tmp_K_NASKERNEL_CONFIG_FILE
	fi
fi

# Returns success if _set_config_file_vars was called.
_is_config_file_set() {
	[[ ${_config_file_set} = 1 ]]
}

_set_config_file_vars() {
	# Setup kernel configuration file name
	if [ -z "${K_NASKERNEL_SELF_TARBALL_NAME}" ]; then
		if [ "${K_NASKERNEL_URI_CONFIG}" = "yes" ]; then
			K_NASKERNEL_CONFIG_FILE="${K_NASKERNEL_CONFIG_FILE:-${K_NASKERNEL_NAME}-${PVR}-__ARCH__.config}"
			K_NASKERNEL_FW_CONFIG_FILE="${K_NASKERNEL_FW_CONFIG_FILE:-${K_NASKERNEL_NAME}-fw_env-__ARCH__.config}"
			use arm && K_NASKERNEL_CONFIG_FILE=${K_NASKERNEL_CONFIG_FILE/__ARCH__/arm}
			use arm && K_NASKERNEL_FW_CONFIG_FILE=${K_NASKERNEL_FW_CONFIG_FILE/__ARCH__/arm}
		else
			use arm && K_NASKERNEL_CONFIG_FILE="${K_NASKERNEL_CONFIG_FILE:-${K_NASKERNEL_NAME}-${PVR}-arm.config}"
			use arm && K_NASKERNEL_FW_CONFIG_FILE="${K_NASKERNEL_FW_CONFIG_FILE:-${K_NASKERNEL_NAME}-fw_env-arm.config}"
		fi
	else
		K_NASKERNEL_CONFIG_FILE="${K_NASKERNEL_CONFIG_FILE:-${K_NASKERNEL_NAME}-${PVR}-__ARCH__.config}"
		K_NASKERNEL_ALT_CONFIG_FILE="${K_NASKERNEL_ALT_CONFIG_FILE:-${K_NASKERNEL_NAME}-${PV}-__ARCH__.config}"
		use arm && K_NASKERNEL_FW_CONFIG_FILE="${K_NASKERNEL_FW_CONFIG_FILE:-${K_NASKERNEL_NAME}-fw_env-arm.config}"
		if use arm; then
			K_NASKERNEL_CONFIG_FILE=${K_NASKERNEL_CONFIG_FILE/__ARCH__/arm}
			K_NASKERNEL_ALT_CONFIG_FILE=${K_NASKERNEL_ALT_CONFIG_FILE/__ARCH__/arm}
			K_NASKERNEL_FW_CONFIG_FILE=${K_NASKERNEL_FW_CONFIG_FILE/__ARCH__/arm}
		fi
	fi

	_config_file_set=1
}

if [ -n "${K_ONLY_SOURCES}" ] || [ -n "${K_FIRMWARE_PACKAGE}" ]; then
	IUSE="${IUSE}"
	DEPEND="sys-apps/sed"
	RDEPEND="${RDEPEND}"
else
	IUSE="dmraid dracut iscsi lvm mdadm"
	DEPEND="app-arch/xz-utils
		sys-apps/sed
		sys-devel/make
		>=sys-kernel/genkernel-3.4.16-r1
		dracut? ( sys-kernel/dracut )
		sys-block/devio
		dev-embedded/u-boot-tools
		sys-fs/dosfstools"
	RDEPEND="sys-apps/sed
		sys-kernel/linux-firmware"
	if [ -n "${K_REQUIRED_LINUX_FIRMWARE_VER}" ]; then
		RDEPEND+=" >=sys-kernel/linux-firmware-${K_REQUIRED_LINUX_FIRMWARE_VER}"
	fi
fi

# internal function
#
# FUNCTION: _update_depmod
# @USAGE: _update_depmod <-r depmod>
# DESCRIPTION:
# It updates the modules.dep file for the current kernel.
# This is more or less the same of linux-mod update_depmod, with the
# exception of accepting parameter which is passed to depmod -r switch
_update_depmod() {

        # if we haven't determined the version yet, we need too.
        get_version;

	ebegin "Updating module dependencies for ${KV_FULL}"
	if [ -r "${KV_OUT_DIR}"/System.map ]; then
		depmod -ae -F "${KV_OUT_DIR}"/System.map -b "${ROOT}" -r "${1}"
		eend $?
	else
		ewarn
		ewarn "${KV_OUT_DIR}/System.map not found."
		ewarn "You must manually update the kernel module dependencies using depmod."
		eend 1
		ewarn
	fi
}

nas-kernel_pkg_setup() {
	if [ -n "${K_FIRMWARE_PACKAGE}" ]; then
		einfo "Preparing kernel firmwares"
	else
		einfo "Preparing kernel and its modules"
	fi
}

nas-kernel_src_unpack() {
	local okv="${OKV}"
	if [ -n "${K_NASKERNEL_SELF_TARBALL_NAME}" ]; then
		OKV="${PVR}+${K_NASKERNEL_SELF_TARBALL_NAME}"
	fi
	if [ -n "${K_NASCONFIGS_VER}" ]; then
		unpack "${K_NASCONFIGS_PKG}"
	fi
	kernel-2_src_unpack
	if [ -n "${K_NASKERNEL_FORCE_SUBLEVEL}" ]; then
		# patch out Makefile with proper sublevel
		sed -i "s:^SUBLEVEL = .*:SUBLEVEL = ${K_NASKERNEL_FORCE_SUBLEVEL}:" \
			"${S}/Makefile" || die
	fi
	#comment out Extra verion change by CK patch
	sed -i -e 's/\(^EXTRAVERSION :=.*$\)/# \1/' "${S}/Makefile"
	if [ -n "${K_NASKERNEL_RESET_EXTRAVERSION}" ]; then
		sed -i "s:^EXTRAVERSION =.*:EXTRAVERSION = :" "${S}/Makefile" || die
		# some sources could have multiple append-based EXTRAVERSIONs
		sed -i "s/^EXTRAVERSION :=.*//" "${S}/Makefile" || die
	fi
	OKV="${okv}"

	# Let's handle EAPIs 0 and 1...
	case ${EAPI:-0} in
		0|1) nas-kernel_src_prepare ;;
	esac

	# delete empty directories
	pushd "${S}"
	find . -depth -type d -empty -delete
	popd
}

nas-kernel_src_prepare() {
	_set_config_file_vars
}

nas-kernel_src_compile() {
	if [ -n "${K_FIRMWARE_PACKAGE}" ]; then
		_firmwares_src_compile
	elif [ -n "${K_ONLY_SOURCES}" ]; then
		kernel-2_src_compile
	else
		_kernel_src_compile
	fi
}

_firmwares_src_compile() {
	einfo "Starting to compile firmwares..."
	_kernel_copy_config "${S}/.config"
	cd "${S}" || die "cannot find source dir"

	export LDFLAGS=""
	OLDARCH="${ARCH}"
	unset ARCH
	emake firmware || die "cannot compile firmwares"
	ARCH="${OLDARCH}"
}

_kernel_copy_config() {
	_is_config_file_set \
		|| die "Kernel configuration file not set. Was nas-kernel_src_prepare() called?"

	if [ -n "${K_NASKERNEL_SELF_TARBALL_NAME}" ]; then
		local base_path="${S}/sablink/config"
		if [ -f "${base_path}/${K_NASKERNEL_ALT_CONFIG_FILE}" ]; then
			# new path, without revision
			cp "${base_path}/${K_NASKERNEL_ALT_CONFIG_FILE}" "${1}" || die "cannot copy kernel config"
		else
			# PVR path (old)
			cp "${base_path}/${K_NASKERNEL_CONFIG_FILE}" "${1}" || die "cannot copy kernel config"
		fi
	else
		if [ "${K_NASKERNEL_URI_CONFIG}" = "no" ]; then
			cp "${FILESDIR}/${PF/-r0/}-${ARCH}.config" "${1}" || die "cannot copy kernel config"
		else
			if [ -n "${K_NASCONFIGS_VER}" ]; then
				rm -rf "${S}/sablink"
				cp -rf "${WORKDIR}"/sablink "${S}"
				pushd "${S}"
				sablink/scripts/prepareconfig ${K_NASKERNEL_NAME}-${CHOST/-*/}
				mv .config "${1}.tmp"
				mv "${1}.tmp" "${1}"
				popd
			else
				cp "${DISTDIR}/${K_NASKERNEL_CONFIG_FILE}" "${1}" || die "cannot copy kernel config"
			fi
		fi
	fi
}

_kernel_src_compile() {
	# disable sandbox
	export SANDBOX_ON=0

	# needed anyway, even if grub use flag is not used here
	if use arm; then
		mkdir -p "${WORKDIR}"/boot/dtb
	else
		mkdir -p "${WORKDIR}"/boot
	fi

	einfo "Starting to compile kernel..."
	_kernel_copy_config "${WORKDIR}"/config

	# do some cleanup
	rm -rf "${WORKDIR}"/lib
	rm -rf "${WORKDIR}"/cache
	rm -rf "${S}"/temp

	# creating workdirs
	# some kernels fail with make 3.82 if firmware dir is not created
	mkdir "${WORKDIR}"/lib/lib/firmware -p
	mkdir "${WORKDIR}"/cache
	mkdir "${S}"/temp

	cd "${S}" || die
	GKARGS="--no-save-config --disklabel"
	use dracut && GKARGS="${GKARGS} --dracut"
	use dmraid && GKARGS="${GKARGS} --dmraid"
	use iscsi && GKARGS="${GKARGS} --iscsi"
	use mdadm && GKARGS="${GKARGS} --mdadm"
	use lvm && GKARGS="${GKARGS} --lvm"

	export DEFAULT_KERNEL_SOURCE="${S}"
	export CMD_KERNEL_DIR="${S}"
	for opt in ${MAKEOPTS}; do
		if [ "${opt:0:2}" = "-j" ]; then
			mkopts="${opt}"
			break
		fi
	done
	[ -z "${mkopts}" ] && mkopts="-j3"

	OLDARCH="${ARCH}"
	env_setup_xmakeopts
	[ -n "${xmakeopts}" ] && eval "${xmakeopts}"
	if [ -n "${CROSS_COMPILE}" ] && [ "${CBUILD:-${CHOST}}" != "${CTARGET}" ]; then
		einfo "Enabling cross-emerge for ${CROSS_COMPILE}, arch: ${KARCH}"
		GKARGS="${GKARGS} --arch-override=${KARCH}"
		GKARGS="${GKARGS} --kernel-cross-compile=${CROSS_COMPILE}"
		GKARGS="${GKARGS} --utils-cross-compile=${CROSS_COMPILE}"
		# ARCH= must be forced to KARCH
		ARCH="${KARCH}"
	else
		einfo "Cross-emerge is disabled"
		unset CROSS_COMPILE
		unset ARCH
	fi

	# If ARM, build the uImage directly
	#if use arm; then
	#	K_GENKERNEL_ARGS+=" --kernel-target=uImage --kernel-binary=arch/arm/boot/uImage"
	#fi

	# Workaround bug in splash_geninitramfs corrupting the initramfs
	# if xz compression is used (newer genkernel >3.4.24)
	local support_comp=$(genkernel --help | grep compress-initramfs-type)
	if [ -n "${support_comp}" ]; then
		GKARGS+=" --compress-initramfs-type=gzip"
	fi

	K_NASKERNEL_DTB="none"
	# Buffalo anounced a new box named Pro Live (video transcode streaming)
	# so the old ls_pro_live has to be split to ls_pro ls_live
	# for now let it stay but a move schould be done to ls_pro
	if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_chl" ]; then
		devio > foo 'wl 0xe3a01c0B,4' 'wl 0xe3811061,4' # Linkstation Live V3 (2.6.34)
		K_NASKERNEL_TYPE="buffalo"
		K_NASKERNEL_DEVICE="Buffalo Linkstation LiveV3 (LS-CHL)"
	fi
	if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_chl2" ]; then
		if [[ "${KV_MAJOR}${KV_MINOR}" -ge 35 ]]; then
			# new Device tree no need for devio
			K_NASKERNEL_DTB="kirkwood-lschlv2.dtb"
		else
			devio > foo 'wl 0xe3a01c0a,4' 'wl 0xe3811067,4' # Linkstation XHL/CHLv2 (2.6.30)
		fi
		K_NASKERNEL_TYPE="buffalo"
		K_NASKERNEL_DEVICE="Buffalo LS-XHL Series"
	fi
	if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_hgl" ]; then
		devio > foo 'wl 0xe3a01c07,4' 'wl 0xe38110d5,4' # Linkstation HGL (2.6.31)
		K_NASKERNEL_TYPE="buffalo"
		K_NASKERNEL_DEVICE="Buffalo Linkstation LS-HGL"
	fi
	if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_live" ]; then
		devio > foo 'wl 0xe3a01c06,4' 'wl 0xe3811031,4' # Linkstation Pro/Live (2.6.26)
		K_NASKERNEL_TYPE="buffalo"
		K_NASKERNEL_DEVICE="Buffalo Linkstation Pro/Live"
	fi
	if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_mini" ]; then
		devio > foo 'wl 0xe3a01c07,4' 'wl 0xe3811042,4' # Linkstation mini (2.6.29)
		K_NASKERNEL_TYPE="buffalo"
		K_NASKERNEL_DEVICE="Buffalo Linkstation Mini"
	fi
	if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_pro" ]; then
		devio > foo 'wl 0xe3a01c06,4' 'wl 0xe3811031,4' # Linkstation Pro/Live (2.6.26)
		K_NASKERNEL_TYPE="buffalo"
		K_NASKERNEL_DEVICE="Buffalo Linkstation Pro/Live"
	fi
	if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_pro_duo_rev1" ]; then
		devio > foo 'wl 0xe3a01c07,4' 'wl 0xe3811027,4' # Linkstation Pro Duo (2.6.30)
		K_NASKERNEL_TYPE="buffalo"
		K_NASKERNEL_DEVICE="Buffalo Linkstation Pro Duo - Revision 1"
	fi
	if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_pro_duo_rev2" ]; then
		devio > foo 'wl 0xe3a01c07,4' 'wl 0xe3811027,4' # Linkstation Pro Duo (2.6.30)
		K_NASKERNEL_TYPE="buffalo"
		K_NASKERNEL_DEVICE="Buffalo Linkstation Pro Duo - Revision 2"
	fi
	if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_ql" ]; then
		devio > foo 'wl 0xe3a01c10,4' 'wl 0xe381108e,4' # Buffalo Linkstation Quad LSQL. Registered 2012.06.15.  
		K_NASKERNEL_TYPE="buffalo"
		K_NASKERNEL_DEVICE="Buffalo Linkstation Quad"
	fi
	if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_vl" ]; then
		devio > foo 'wl 0xe3a01c0d,4' 'wl 0xe381100a,4' # Linkstation vl (2.6.35)
		K_NASKERNEL_TYPE="buffalo"
		K_NASKERNEL_DEVICE="Buffalo LS-VL Series"
	fi
	if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_wxl" ]; then
		devio > foo 'wl 0xe3a01c0b,4' 'wl 0xe38110c4,4' # Linkstation WXL (2.6.35)
		K_NASKERNEL_TYPE="buffalo"
		# Broken hardware name needs to be correct in u-boot firmware
		K_NASKERNEL_DEVICE="Buffalo Linkstation Pro/Live"
	fi
	if [ "${K_NASKERNEL_NAME}" = "buffalo_ls_xhl" ]; then
		if [[ "${KV_MAJOR}${KV_MINOR}" -ge 35 ]]; then
			# new Device tree no need for devio
			K_NASKERNEL_DTB="kirkwood-lsxhl.dtb"
		else
			devio > foo 'wl 0xe3a01c0a,4' 'wl 0xe3811067,4' # Linkstation XHL/CHLv2 (2.6.30)
		fi
		K_NASKERNEL_TYPE="buffalo"
		K_NASKERNEL_DEVICE="Buffalo LS-XHL Series"
	fi

	# Freescale
	if [ "${K_NASKERNEL_NAME}" = "freescale_mx53_loco" ]; then
		K_NASKERNEL_TYPE="default"
		K_NASKERNEL_DEVICE="Freescale MX53 LOCO Board"
		K_GENKERNEL_ARGS+=" --kernel-target=uImage --kernel-binary=arch/arm/boot/uImage"
	fi

	unset LDFLAGS

	if [ "${K_NASKERNEL_DTB}" != "none" ]; then
		cp "${WORKDIR}/config" .config
		emake ${K_NASKERNEL_DTB}
		cp "${S}"/arch/arm/boot/${K_NASKERNEL_DTB} "${S}"
		emake mrproper
	fi

	DEFAULT_KERNEL_SOURCE="${S}" CMD_KERNEL_DIR="${S}" genkernel ${GKARGS} ${K_GENKERNEL_ARGS} \
		--kerneldir="${S}" \
		--kernel-config="${WORKDIR}"/config \
		--cachedir="${WORKDIR}"/cache \
		--makeopts="${mkopts}" \
		--tempdir="${S}"/temp \
		--logfile="${WORKDIR}"/genkernel.log \
		--bootdir="${WORKDIR}"/boot \
		--mountboot \
		--module-prefix="${WORKDIR}"/lib \
		all || die "genkernel failed"
	ARCH=${OLDARCH}

	cp "${S}"/Module.symvers "${S}"/System.map "${S}"/include/linux/version.h "${WORKDIR}"

	# Buffalo Boxes have a special naming and start address
	if [ "${K_NASKERNEL_TYPE}" = "buffalo" ]; then
		if [ "${K_NASKERNEL_DTB}" = "none" ]; then
			einfo "Prepend the correct Device ID to the Kenel Image"
			cat foo "${WORKDIR}"/boot/kernel-genkernel-${ARCH}-${KV_FULL} > zImage.new
			einfo "Create uImage of the resulting Image"
			mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n uImage-${KV_FULL} \
				-d zImage.new "${WORKDIR}"/boot/uImage-genkernel-${ARCH}-${KV_FULL}.buffalo
			einfo "Create uInitrd with correct start address"
			mkimage -A arm -O linux -T ramdisk -C none -a 0x00000000 -e 0x00000000 -n initrd-${KV_FULL} \
				-d "${WORKDIR}"/boot/initramfs-genkernel-${ARCH}-${KV_FULL} "${WORKDIR}"/boot/initrd-genkernel-${ARCH}-${KV_FULL}.buffalo
		else
			einfo "Append the device-tree-blob to the Kenel Image"
			cat "${WORKDIR}"/boot/kernel-genkernel-${ARCH}-${KV_FULL} "${S}"/${K_NASKERNEL_DTB} > zImage.new
			cp "${S}"/${K_NASKERNEL_DTB} "${WORKDIR}"/boot/dtb/
			einfo "Create uImage of the resulting Image"
			mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n uImage-${KV_FULL} \
				-d zImage.new "${WORKDIR}"/boot/uImage-genkernel-${ARCH}-${KV_FULL}.buffalo
			einfo "Create uInitrd with correct start address"
			mkimage -A arm -O linux -T ramdisk -C none -a 0x00000000 -e 0x00000000 -n initrd-${KV_FULL} \
				-d "${WORKDIR}"/boot/initramfs-genkernel-${ARCH}-${KV_FULL} "${WORKDIR}"/boot/uInitrd-genkernel-${ARCH}-${KV_FULL}.buffalo
		fi
	fi

	# cleanup
	rm -rf foo zImage.new ${K_NASKERNEL_DTB}
	rm "${WORKDIR}"/boot/kernel-genkernel-${ARCH}-${KV_FULL} "${WORKDIR}"/boot/initramfs-genkernel-${ARCH}-${KV_FULL}
}

_setup_mkimage_ramdisk() {
	local initramfs=$(ls "${WORKDIR}"/boot/${KERN_INITRAMFS_SEARCH_NAME}* 2> /dev/null)
	if [ ! -e "${initramfs}" ] || [ ! -f "${initramfs}" ]; then
		ewarn "No initramfs at ${initramfs}, cannot run mkimage on it!"
	else
		einfo "Setting up u-boot initramfs for: ${initramfs}"
		/usr/bin/mkimage -A arm -O linux -T ramdisk -C none -a "${K_MKIMAGE_RAMDISK_ADDRESS}" \
			-e "${K_MKIMAGE_RAMDISK_ENTRYPOINT}" -d "${initramfs}" \
			"${initramfs}.u-boot" || return 1
		mv "${initramfs}.u-boot" "${initramfs}" || return 1
	fi
	return 0
}

nas-kernel_src_install() {
	if [ -n "${K_FIRMWARE_PACKAGE}" ]; then
		_firmwares_src_install
	elif [ -n "${K_ONLY_SOURCES}" ]; then
		_kernel_sources_src_install
	else
		_kernel_src_install
	fi
}

_firmwares_src_install() {
	dodir /lib/firmware
	keepdir /lib/firmware
	cd "${S}" || die
	emake INSTALL_FW_PATH="${D}/lib/firmware" firmware_install || die "cannot install firmwares"
}

_kernel_sources_src_install() {
	local version_h_name="${KV_OUT_DIR/\//}/include/linux"
	local version_h="${ROOT}${version_h_name}"
	if [ -f "${version_h}" ]; then
		einfo "Discarding previously installed version.h to avoid collisions"
		addwrite "/${version_h_name}"
		rm -f "${version_h}"
	fi

	_kernel_copy_config ".config"
	kernel-2_src_install
	cd "${D}${KV_OUT_DIR}" || die
	local oldarch="${ARCH}"
	unset ARCH
	if ! use sources_standalone; then
		make modules_prepare || die "failed to run modules_prepare"
		rm .config || die "cannot remove .config"
		rm Makefile || die "cannot remove Makefile"
		rm include/linux/version.h || die "cannot remove include/linux/version.h"
	fi
	ARCH="${oldarch}"
}

_kernel_src_install() {
	use arm && { _setup_mkimage_ramdisk || die "cannot setup mkimage"; }

	dodir "${KV_OUT_DIR}"
	insinto "${KV_OUT_DIR}"

	_kernel_copy_config ".config"
	doins ".config" || die "cannot copy kernel config"
	doins Makefile || die "cannot copy Makefile"
	doins "${WORKDIR}"/Module.symvers || die "cannot copy Module.symvers"
	doins "${WORKDIR}"/System.map || die "cannot copy System.map"

	# NOTE: this is a workaround caused by linux-info.eclass not
	# being ported to EAPI=2 yet
	local version_h_name="${KV_OUT_DIR/\//}/include/linux"
	local version_h="${ROOT}${version_h_name}/version.h"
	if [ -f "${version_h}" ]; then
		einfo "Discarding previously installed version.h to avoid collisions"
		addwrite "${version_h}"
		rm -f "${version_h}"
	fi

	# Include include/linux/version.h to make Portage happy
	dodir "${KV_OUT_DIR}/include/linux"
	insinto "${KV_OUT_DIR}/include/linux"
	doins "${WORKDIR}/version.h" || die "cannot copy version.h"

	insinto "/boot"
	doins "${WORKDIR}"/boot/* || die "cannot copy /boot over"
	cp -Rp "${WORKDIR}"/lib/* "${D}/" || die "cannot copy /lib over"

	# This doesn't always work because KV_FULL (when K_NOSETEXTRAVERSION=1) doesn't
	# reflect the real value used in Makefile
	#dosym "../../..${KV_OUT_DIR}" "/lib/modules/${KV_FULL}/source" || die "cannot install source symlink"
	#dosym "../../..${KV_OUT_DIR}" "/lib/modules/${KV_FULL}/build" || die "cannot install build symlink"
	cd "${D}"/lib/modules/* || die "cannot enter /lib/modules directory, more than one element?"
	# cleanup previous
	rm -f build source || die
	# create sane symlinks
	ln -sf "../../..${KV_OUT_DIR}" source || die "cannot create source symlink"
	ln -sf "../../..${KV_OUT_DIR}" build || die "cannot create build symlink"
	cd "${S}" || die

	# drop ${D}/lib/firmware, virtual/linux-firmwares provides it
	rm -rf "${D}/lib/firmware"

	if [ -n "${K_WORKAROUND_SOURCES_COLLISION}" ]; then
		# Fixing up Makefile collision if already installed by
		# openvz-sources
		einfo "Workarounding source package collisions"
		make_file="${KV_OUT_DIR/\//}/Makefile"
		einfo "Makefile: ${make_file}"
		if [ -f "${ROOT}/${make_file}" ]; then
			elog "Removing ${D}/${make_file}"
			rm -f "${D}/${make_file}"
		fi
	fi

	# Install kernel configuration information
	# useful for Entropy kernel-switcher
	if _is_kernel_binary; then
		# release level is enough for now
		base_dir="/etc/kernels/${P}"
		dodir "${base_dir}"
		insinto "${base_dir}"
		echo "${KV_FULL}" > "RELEASE_LEVEL"
		doins "RELEASE_LEVEL"
		einfo "Installing ${base_dir}/RELEASE_LEVEL file: ${KV_FULL}"
	fi

	# copy firmware config file to propper location
	if [ -n "${K_NASKERNEL_SELF_TARBALL_NAME}" ]; then
		local base_path="${S}/sablink/config"
		cp "${base_path}/${K_NASKERNEL_FW_CONFIG_FILE}" "${D}/etc/fw_env.config.${K_NASKERNEL_NAME}" || die "cannot copy firmware config"
	else
		if [ "${K_NASKERNEL_URI_CONFIG}" = "no" ]; then
			cp "${FILESDIR}/${PF/-r0/}-${ARCH}.config" "${D}/etc/fw_env.config.${K_NASKERNEL_NAME}" || die "cannot copy firmware config"
		else
			cp "${DISTDIR}/${K_NASKERNEL_FW_CONFIG_FILE}" "${D}/etc/fw_env.config.${K_NASKERNEL_NAME}" || die "cannot copy firmware config"
		fi
	fi

}

nas-kernel_pkg_preinst() {
	if _is_kernel_binary; then
		mount-boot_pkg_preinst
	fi
}

_get_real_extraversion() {
	make_file="${ROOT}${KV_OUT_DIR}/Makefile"
	local extraver=$(grep -r "^EXTRAVERSION =" "${make_file}" | cut -d "=" -f 2 | head -n 1)
	local trimmed=${extraver%% }
	echo ${trimmed## }
}

_get_release_level() {
	if [[ -n "${K_WORKAROUND_USE_REAL_EXTRAVERSION}" ]]; then
		echo "${KV_MAJOR}.${KV_MINOR}.${KV_PATCH}$(_get_real_extraversion)"
	elif [[ "${KV_MAJOR}${KV_MINOR}" -eq 26 ]]; then
		echo "${KV_FULL}"
	elif [[ "${OKV/.*}" = "3" ]] && [[ "${KV_PATCH}" = "0" ]]; then
		# Linux 3.x support, KV_FULL is set to: 3.0-sablink
		# need to add another final .0 to the version part
		echo "${KV_FULL/-/.0-}"
	else
		echo "${KV_FULL}"
	fi
}

nas-kernel_uimage_config() {
	# Two cases here:
	# 1. /boot/uImage symlink is broken (pkg_postrm)
	# 2. /boot/uImage symlink doesn't exist (pkg_postinst)

	if ! has_version app-admin/eselect-uimage; then
		ewarn "app-admin/eselect-uimage not installed"
		ewarn "If you are using this tool, please install it"
		return 0
	fi

	local uimage_file=$(eselect uimage show --quiet 2> /dev/null)
	if [ -z "${uimage_file}" ]; then
		# pick the first listed, sorry!
		local eselect_list=$(eselect uimage list --quiet 2> /dev/null)
		if [ -n "${eselect_list}" ]; then
			eselect uimage set 1
		else
			echo
			ewarn "No more kernels available, you won't be able to boot"
			echo
		fi
	else
		echo
		elog "You are currently booting with kernel:"
		elog "${uimage_file}"
		elog
		elog "Use 'eselect uimage' in order to switch between the available ones"
		echo
	fi
}


nas-kernel_pkg_postinst() {
	if _is_kernel_binary; then
		fstab_file="${ROOT}etc/fstab"
		einfo "Removing extents option for ext4 drives from ${fstab_file}"
		# Remove "extents" from /etc/fstab
		if [ -f "${fstab_file}" ]; then
			sed -i '/ext4/ s/extents//g' "${fstab_file}"
		fi

		# Setup newly installed kernel on ARM
		if use arm; then
			nas-kernel_uimage_config
		fi

		kernel-2_pkg_postinst
		local depmod_r=$(_get_release_level)
		_update_depmod "${depmod_r}"

		elog "Please report kernel bugs at:"
		elog "http://bugs.sablink.org"

		elog "The source code of this kernel is located at"
		elog "=${K_KERNEL_SOURCES_PKG}."
		elog "sablink Linux recommends that portage users install"
		elog "${K_KERNEL_SOURCES_PKG} if you want"
		elog "to build any packages that install kernel modules"
		elog "(such as ati-drivers, nvidia-drivers, virtualbox, etc...)."

		# copy the firmware config for the actual hardware to the right place
		device=$(grep "Hardware[[:space:]]*:" /proc/cpuinfo 2>/dev/null | head -n1 | sed "s/^[^:]*: //")
		if [ "${K_NASKERNEL_DEVICE}" = "$device" ]; then
			cp ${ROOT}/etc/fw_env.config.${K_NASKERNEL_NAME} ${ROOT}/etc/fw_env.config
		fi
	else
		kernel-2_pkg_postinst
	fi
}

nas-kernel_pkg_prerm() {
	if _is_kernel_binary; then
		mount-boot_pkg_prerm
	fi
}

nas-kernel_pkg_postrm() {
	if _is_kernel_binary; then
		# Setup newly installed kernel on ARM
		if use arm; then
			nas-kernel_uimage_config
		fi
	fi
}

# export all the available functions here
case ${EAPI:-0} in
	0|1) extra_export_funcs= ;;
	*) extra_export_funcs=src_prepare ;;
esac

EXPORT_FUNCTIONS pkg_setup src_unpack ${extra_export_funcs} \
	src_compile src_install pkg_preinst pkg_postinst pkg_prerm pkg_postrm