overlay/Documentation/ls_pro_live/root_overlay/etc/sysctl.conf

# /etc/sysctl.conf
#
# For more information on how this file works, please see
# the manpages sysctl(8) and sysctl.conf(5).
#
# In order for this file to work properly, you must first
# enable 'Sysctl support' in the kernel.
#
# Look in /proc/sys/ for all the things you can setup.
#

# Disables packet forwarding
net.ipv4.ip_forward = 0
# Disables IP dynaddr
#net.ipv4.ip_dynaddr = 0
# Disable ECN
#net.ipv4.tcp_ecn = 0
# Enables source route verification
net.ipv4.conf.default.rp_filter = 1
# Enable reverse path
net.ipv4.conf.all.rp_filter = 1

# Enable SYN cookies (yum!)
# http://cr.yp.to/syncookies.html
#net.ipv4.tcp_syncookies = 1

# Disable source route
#net.ipv4.conf.all.accept_source_route = 0
#net.ipv4.conf.default.accept_source_route = 0

# Disable redirects
#net.ipv4.conf.all.accept_redirects = 0
#net.ipv4.conf.default.accept_redirects = 0

# Disable secure redirects
#net.ipv4.conf.all.secure_redirects = 0
#net.ipv4.conf.default.secure_redirects = 0

# Ignore ICMP broadcasts
#net.ipv4.icmp_echo_ignore_broadcasts = 1

# Disables the magic-sysrq key
# Set Loggong on on seriel console for Linkstatio
kernel.sysrq = 1
# When the kernel panics, automatically reboot in 3 seconds
#kernel.panic = 3
# Allow for more PIDs (cool factor!); may break some programs
#kernel.pid_max = 999999

# You should compile nfsd into the kernel or add it
# to modules.autoload for this to work properly
# TCP Port for lock manager
#fs.nfs.nlm_tcpport = 0
# UDP Port for lock manager
#fs.nfs.nlm_udpport = 0

# logging settings for Buffalo Linkstation
The logging levels are
# 0 system is unusable
# 1 action must be taken immediately
# 2 critical conditions
# 3 error conditions
# 4 warning conditions
# 5 normal but significant condition
# 6 informational
# 7 debug-level messages 
kernel.printk="7"