[molecules/beagleboard-xm] add molecules for the BeagleBoard xM

boot/arm/beagleboard-xm/README

@@ -0,0 +1,70 @@
+Hi, welcome to Sabayon for the BeagleBoard xM.
+
+First of all, you may want to install the image into a new SDHC card.
+Make sure to have enough space for it, for example, if you downloaded
+the 4GB version, make sure you're using a 4GB SDHC stick.
+
+Other requirements:
+-------------------
+
+  - a Linux distro to copy the image to the SDHC
+  - a SDHC reader
+  - a root shell on the Linux distro
+
+
+How to burn the image:
+----------------------
+
+Insert the SDHC memory into your reader (make sure that the LOCK
+switch is turned off). After a few seconds, type:
+
+  # dmesg | tail -n 10
+
+In the last kernel message lines you will be able to read the
+actual device name, might be something like "sdc" or in general
+"sdX" where X is just a letter.
+Make sure to see the same device name inside /dev directory.
+
+Once you got the name, just dump the image into that, in this
+example, we assume that the device is /dev/sdc and the image
+name is "Sabayon_Linux_8_armv7a_BeagleBoard_xM_4GB.img".
+Do this as root!
+
+  # xzcat Sabayon_Linux_8_armv7a_BeagleBoard_xM_4GB.img > /dev/sdd
+
+Once it is done, check for any error using:
+
+  # dmesg | tail -n 10
+
+And if it's all good, type:
+
+  # sync; sync; sync
+
+To make sure everything has been flushed to the device.
+
+At this point, extract your SDHC and place it into the BeagleBoard xM.
+You're set!
+
+
+How to change keyboard mapping:
+-------------------------------
+
+Our images come with "keyboard-setup", a shell too that lets you easily
+do this, just type:
+
+  # keyboard-setup "<your keyboard layout code>" all
+
+Then reboot!
+
+
+How to change language:
+-----------------------
+
+Open /etc/locale.gen and add your locale (you can find a full list
+at: /usr/share/i18n/SUPPORTED).
+Make sure to add UTF-8 locales, this is what we support.
+Once you've added your line, just type:
+
+  # language-setup "<your locale, without the .UTF-8 part>" system
+
+Then reboot!

molecules/beagleboard-xm.common

@@ -1,9 +1,27 @@
 # List of packages to add on the BeagleBoard xM
 packages_to_add:
+	@lxde,
+	app-misc/sabayonlive-tools,
+	app-misc/sabayon-skel,
+	app-admin/syslog-ng,
 	lxde-base/lxdm,
+	gnome-extra/nm-applet-gtk2,
+	net-fs/nfs-utils,
+	net-misc/networkmanager,
+	net-misc/ntp,
+	sys-apps/keyboard-configuration-helpers,
+	sys-apps/language-configuration-helpers,
 	sys-kernel/linux-beagle,
 	x11-base/xorg-server,
-	x11-drivers/xf86-video-omapfb
+	x11-drivers/xf86-input-evdev,
+	x11-drivers/xf86-video-omapfb,
+	x11-terms/xterm,
+	x11-terms/eterm,
+	x11-themes/equinox-themes,
+	x11-themes/gtk-engines:2,
+	x11-themes/sabayon-artwork-core,
+	x11-wm/fluxbox,
+	www-client/midori
 
 # List of packages to remove from the BeagleBoard xM image
 packages_to_remove:

molecules/sabayon-arm-beagleboard-xm-16G.spec

@@ -1,24 +0,0 @@
-%import /sabayon/molecules/arm-base.common
-%import /sabayon/molecules/beagleboard-xm.common
-
-# Release desc (the actual release description)
-release_desc: armv7a BeagleBoard xM
-
-# Release Version (used to generate release_file)
-release_version: 8
-
-# Specify image file name (image file name will be automatically
-# produced otherwise)
-image_name: Sabayon_Linux_8_armv7a_BeagleBoard_xM_16GB.img
-
-# Specify the image file size in Megabytes. This is mandatory.
-# To avoid runtime failure, make sure the image is large enough to fit your
-# chroot data.
-image_mb: 16000
-
-# Path to boot partition data (MLO, u-boot.img etc)
-source_boot_directory: /sabayon/boot/arm/beagleboard-xm
-
-# External script that will generate the image file.
-# The same can be copied onto a MMC by using dd
-image_generator_script: /sabayon/scripts/beagleboard_xm_image_generator_script.sh

molecules/sabayon-arm-beagleboard-xm-4G.spec

@@ -14,7 +14,7 @@ image_name: Sabayon_Linux_8_armv7a_BeagleBoard_xM_4GB.img
 # Specify the image file size in Megabytes. This is mandatory.
 # To avoid runtime failure, make sure the image is large enough to fit your
 # chroot data.
-image_mb: 3800
+image_mb: 3900
 
 # Path to boot partition data (MLO, u-boot.img etc)
 source_boot_directory: /sabayon/boot/arm/beagleboard-xm

molecules/sabayon-arm-beagleboard-xm-8G.spec

@@ -9,12 +9,12 @@ release_version: 8
 
 # Specify image file name (image file name will be automatically
 # produced otherwise)
-image_name: Sabayon_Linux_8_armv7a_BeagleBoard_xM_4GB.img
+image_name: Sabayon_Linux_8_armv7a_BeagleBoard_xM_8GB.img
 
 # Specify the image file size in Megabytes. This is mandatory.
 # To avoid runtime failure, make sure the image is large enough to fit your
 # chroot data.
-image_mb: 7800
+image_mb: 7900
 
 # Path to boot partition data (MLO, u-boot.img etc)
 source_boot_directory: /sabayon/boot/arm/beagleboard-xm

scripts/mkloopcard_beagleboard_xm_chroot_hook.sh

@@ -6,19 +6,64 @@
 env-update
 . /etc/profile
 
-# enable sshd by default
+setup_displaymanager() {
-rc-update add sshd default
+	# determine what is the login manager
+	if [ -n "$(equo match --installed gnome-base/gdm -qv)" ]; then
+		sed -i 's/DISPLAYMANAGER=".*"/DISPLAYMANAGER="gdm"/g' /etc/conf.d/xdm
+	elif [ -n "$(equo match --installed lxde-base/lxdm -qv)" ]; then
+		sed -i 's/DISPLAYMANAGER=".*"/DISPLAYMANAGER="lxdm"/g' /etc/conf.d/xdm
+	elif [ -n "$(equo match --installed kde-base/kdm -qv)" ]; then
+		sed -i 's/DISPLAYMANAGER=".*"/DISPLAYMANAGER="kdm"/g' /etc/conf.d/xdm
+	else
+		sed -i 's/DISPLAYMANAGER=".*"/DISPLAYMANAGER="xdm"/g' /etc/conf.d/xdm
+	fi
+}
 
-# select the first available kernel
+setup_boot() {
-eselect uimage set 1
+	# enable sshd by default
+	rc-update add sshd default
+	# enable logger by default
+	rc-update add syslog-ng boot
+	# enable dbus, of course, and also NetworkManager
+	rc-update add dbus boot
+	rc-update add NetworkManager default
+	rc-update del net.eth0 default
 
-# setup root password to... root!
+	# start X.Org by default
-echo root:root | chpasswd
+	rc-update add xdm default
-# cleaning up deps
-rc-update --update
 
-# setup serial login
+	# select the first available kernel
-echo "s0:12345:respawn:/sbin/agetty 115200 ttyO2 vt100" >> /etc/inittab
+	eselect uimage set 1
+
+	# cleaning up deps
+	rc-update --update
+}
+
+setup_users() {
+	# setup root password to... root!
+	echo root:root | chpasswd
+	# setup normal user "sabayon"
+	(
+		if [ ! -x "/sbin/sabayon-functions.sh" ]; then
+			echo "no /sbin/sabayon-functions.sh found"
+			exit 1
+		fi
+		. /sbin/sabayon-functions.sh
+		sabayon_setup_live_user "sabayon" || exit 1
+		# setup "sabayon" password to... sabayon!
+		echo "sabayon:sabayon" | chpasswd
+	)
+}
+
+setup_serial() {
+	# setup serial login
+	echo "s0:12345:respawn:/sbin/agetty 115200 ttyO2 vt100" >> /etc/inittab
+}
+
+setup_displaymanager
+setup_users
+setup_boot
+setup_serial
 
 exit 0