add support for ox820 devices

boot/arm/medion_stg212/README.txt

@@ -0,0 +1,83 @@
+Hi, welcome to Sabayon for the BeagleBoard xM.
+
+First of all, you may want to install the image into a new SDHC card.
+Make sure to have enough space for it, for example, if you downloaded
+the 4GB version, make sure you're using a 4GB SDHC stick.
+
+Other requirements:
+-------------------
+
+  - a Linux distro to copy the image to the SDHC
+  - a SDHC reader
+  - a root shell on the Linux distro
+
+
+How to burn the image:
+----------------------
+
+Insert the SDHC memory into your reader (make sure that the LOCK
+switch is turned off). After a few seconds, type:
+
+  # dmesg | tail -n 10
+
+In the last kernel message lines you will be able to read the
+actual device name, might be something like "sdc" or in general
+"sdX" where X is just a letter.
+Make sure to see the same device name inside /dev directory.
+
+Once you got the name, just dump the image into that, in this
+example, we assume that the device is /dev/sdc and the image
+name is "Sabayon_Linux_8_armv7a_BeagleBoard_xM_4GB.img".
+Do this as root!
+
+  # xzcat Sabayon_Linux_8_armv7a_BeagleBoard_xM_4GB.img > /dev/sdd
+
+Once it is done, check for any error using:
+
+  # dmesg | tail -n 10
+
+And if it's all good, type:
+
+  # sync; sync; sync
+
+To make sure everything has been flushed to the device.
+
+At this point, extract your SDHC and place it into the BeagleBoard xM.
+You're set!
+
+
+How to change keyboard mapping:
+-------------------------------
+
+Our images come with "keyboard-setup", a shell too that lets you easily
+do this, just type:
+
+  # keyboard-setup "<your keyboard layout code>" all
+
+Then reboot!
+
+
+How to change language:
+-----------------------
+
+Open /etc/locale.gen and add your locale (you can find a full list
+at: /usr/share/i18n/SUPPORTED).
+Make sure to add UTF-8 locales, this is what we support.
+Once you've added your line, just type:
+
+  # language-setup "<your locale, without the .UTF-8 part>" system
+
+Then reboot!
+
+
+You want to know more?
+----------------------
+Just go to http://www.sabayon.org and to http://wiki.sabayon.org
+and search for "BeagleBoard".
+We're full of guides.
+
+
+Contact
+-------
+Just mail us at website@sabayon.org if you need any help or register
+to our mailing list at http://lists.sabayon.org/cgi-bin/mailman/listinfo/devel

boot/arm/usb_key_func

@@ -0,0 +1,47 @@
+# usb key funct taken from Medion live and adapted for buffalo
+# modified by Mario Fetka (geos_one) <mario.fetka@gmail.com>
+
+Exe_USB_KEY()
+{
+	# Check model name
+	export MODEL_NAME="@@NASKERNELNAME@@"
+
+	# Scan USB disk for HW test.
+	any_usb=`ls /sys/block/ | grep sd`
+	echo "${any_usb}"
+	if [ -n "${any_usb}" ]; then
+		#/bin/mkdir /mnt/parnerkey
+		for usb in ${any_usb}
+		do
+			echo "checking ${usb}"
+			#Get the number of question marks
+			qmark_num=`fdisk -l /dev/${usb} | grep "^"/dev/${usb} | grep -c "?"`
+			partition_num=`fdisk -l /dev/${usb} | grep "^"/dev/${usb}`
+			if [ "${qmark_num}" == "4" ] || [ "${partition_num}" == "" ]; then
+				mnt_point=/dev/${usb}
+				echo "Trying to mount ${mnt_point}"
+				mount -o iocharset=utf8,shortname=mixed,ro ${mnt_point} /mnt/parnerkey
+			else
+				mnt_point=`fdisk -l /dev/${usb} | grep "^"/dev/${usb} | awk '{print $1}' | sed -n '1p'`
+				echo "Trying to mount ${mnt_point}"
+				mount -o iocharset=utf8,shortname=mixed,ro ${mnt_point} /mnt/parnerkey
+			fi
+
+			mount_SUC=`cat /proc/mounts | grep /mnt/parnerkey`
+			if [ "${mount_SUC}" != "" ]; then
+				if [ -e /mnt/parnerkey/${MODEL_NAME}_check_file ]; then
+					#/mnt/parnerkey/usb_key_func.sh
+					script_path=`cat /mnt/parnerkey/${MODEL_NAME}_check_file | sed -n '1p'`
+					${script_path}
+					if [ $? == 0 ]; then
+						exit 0
+					fi
+				fi
+				umount /mnt/parnerkey
+			else
+				echo "Fail to mount ${mnt_point}"
+			fi
+		done
+		#rmdir /mnt/parnerkey
+	fi
+}

molecules/armelv6-base.common

@@ -0,0 +1,134 @@
+# Define an alternative execution strategy, in this case, the value must be
+execution_strategy: chroot_to_mmc
+
+# Prefix command to add to chroot calls, when on x86_64 and touching a i686
+# chroot, set it to "linux32"
+# prechroot: 
+
+# Outer source chroot script. It's executed before entering the source_chroot.
+# This is the very first thing molecule does. You can use it to setup
+# packages cache.
+# Variables exported:
+# IMAGE_NAME = name of the final MMC image
+# DESTINATION_IMAGE_DIR = path to the destination image directory
+# CHROOT_DIR = path pointing to the chroot
+# outer_source_chroot_script: /some/path.sh
+
+# Inner source chroot script. Called from inside the source_chroot.
+# Can be used to spawn package updates inside the chroot.
+# inner_source_chroot_script: /sabayon/scripts/inner_source_chroot_update.sh
+
+# Outer source chroot script, executed after inner_source_chroot_script.
+# Can be used to unload resources allocated by outer_source_chroot_script.
+# Variables exported:
+# IMAGE_NAME = name of the final MMC image
+# DESTINATION_IMAGE_DIR = path to the destination image directory
+# CHROOT_DIR = path pointing to the chroot
+# outer_source_chroot_script_after: /some/path.sh
+
+# Error script command, executed when something went wrong and molecule has
+# to terminate the execution
+# error_script: /path/to/some/error_script.sh
+
+# Pre-image building script. Hook called before image file creation
+# IMAGE_NAME = name of the final MMC image
+# DESTINATION_IMAGE_DIR = path to the destination image directory
+# CHROOT_DIR = path pointing to the chroot
+# %env pre_image_script: ${SABAYON_MOLECULE_HOME:-/sabayon}/scripts/pre_image_script.sh
+
+# Post-image building script. Hook called after image file creation and move
+# into destination directory.
+# Variables exported:
+# IMAGE_NAME = name of the final MMC image
+# DESTINATION_IMAGE_DIR = path to the destination image directory
+# CHROOT_DIR = path pointing to the chroot
+# IMAGE_PATH = path pointing to the destination image file
+# IMAGE_CHECKSUM_PATH = path pointing to the destination image file checksum (md5)
+%env post_image_script: ${SABAYON_MOLECULE_HOME:-/sabayon}/scripts/post_mmc_image_script.sh
+
+# Destination directory for the image path (MANDATORY)
+%env destination_image_directory: ${SABAYON_MOLECULE_HOME:-/sabayon}/images
+
+# Path to source chroot (mandatory)
+%env source_chroot: ${SABAYON_MOLECULE_HOME:-/sabayon}/sources/image-0-armv6j
+
+# Release file that will be created onto the root filesystem
+release_file: /etc/sablink-edition
+
+# Release string (the actual distro name)
+release_string: SabLink Linux
+
+# Directories to remove completely (comma separated)
+paths_to_remove:
+    /var/lib/entropy/client/database/*/sabayon*,
+    /root/.subversion,
+    /lib/udev-state/devices.tar.bz2,
+    /var/log/scrollkeeper.log, /var/log/genkernel.log,
+    /var/log/emerge.log, /usr/tmp/portage/*,
+    /root/.bash_history,
+    /usr/share/slocate/slocate.db,
+    /root/test-results.txt,
+    /root/test.sh,
+    /usr/portage/distfiles/*,
+    /usr/portage/packages/*,
+    /root/.revdep*,
+    /install-data/games/*,
+    /var/lib/entropy/store/*,
+    /var/log/entropy/*,
+    /var/lib/entropy/caches/*,
+    /var/lib/entropy/smartapps/*/*,
+    /var/lib/entropy/smartapps/*/*,
+    /var/lib/entropy/tmp/*,
+    /var/tmp/entropy/*,
+    /*.txt,
+    /usr/portage/a*,
+    /usr/portage/b*,
+    /usr/portage/c*,
+    /usr/portage/d*,
+    /usr/portage/e*,
+    /usr/portage/f*,
+    /usr/portage/g*,
+    /usr/portage/h*,
+    /usr/portage/i*,
+    /usr/portage/j*,
+    /usr/portage/k*,
+    /usr/portage/licenses,
+    /usr/portage/lxde*,
+    /usr/portage/m*,
+    /usr/portage/n*,
+    /usr/portage/o*,
+    /usr/portage/packages,
+    /usr/portage/pe*,
+    /usr/portage/q*,
+    /usr/portage/r*,
+    /usr/portage/s*,
+    /usr/portage/t*,
+    /usr/portage/u*,
+    /usr/portage/v*,
+    /usr/portage/w*,
+    /usr/portage/x*,
+    /usr/portage/y*,
+    /usr/portage/z*,
+    /etc/ssh/ssh_host_*,
+    /entropy,
+    /tmp/equoerror.txt,
+    /var/cache/man,
+    /var/lib/entropy/glsa/*,
+    /root/local,
+    /var/tmp/*,
+    /root/.ssh,
+    /root/.distcc,
+    /etc/distcc/.ssh
+
+# Directories to empty (comma separated)
+paths_to_empty:
+    /home/sablinkuser/.thumbnails/,
+    /root/.ccache,
+    /var/tmp/portage,
+    /var/tmp/ccache,
+    /var/tmp/portage-pkg,
+    /var/tmp/binpkgs,
+    /var/lib/entropy/portage,
+    /var/lib/entropy/logs,
+    /var/lib/layman,
+    /var/cache/genkernel

molecules/medion_stg212.common

@@ -0,0 +1,25 @@
+# List of packages to add on the Medion STG-212
+packages_to_add:
+	app-admin/eselect-uimage,
+	app-admin/syslog-ng,
+	app-admin/sudo,
+	app-misc/sablink-core,
+	media-fonts/ttf-bitstream-vera,
+	media-fonts/dejavu,
+	media-fonts/corefonts,
+	net-misc/ntp,
+	sys-apps/keyboard-configuration-helpers,
+	sys-apps/language-configuration-helpers,
+	sys-apps/blstools,
+	sys-apps/gptfdisk,
+	sys-auth/consolekit,
+	sys-block/parted,
+	sys-fs/btrfs-progs,
+	sys-fs/ntfs3g,
+	sys-fs/jfsutils,
+	sys-kernel/linux-medion_stg212,
+	sys-process/vixie-cron
+
+# List of packages to remove from the Medion STG-212
+packages_to_remove:
+

molecules/sablink-armel-buffalo_kb_pro-20G.spec

@@ -1,4 +1,4 @@
-%env %import ${SABAYON_MOLECULE_HOME:-/sabayon}/molecules/armel-base.common
+%env %import ${SABAYON_MOLECULE_HOME:-/sabayon}/molecules/armelv5-base.common
 %env %import ${SABAYON_MOLECULE_HOME:-/sabayon}/molecules/buffalo_kb_pro.common
 
 # Release desc (the actual release description)

molecules/sablink-armel-buffalo_ls_chlv2-20G.spec

@@ -1,4 +1,4 @@
-%env %import ${SABAYON_MOLECULE_HOME:-/sabayon}/molecules/armel-base.common
+%env %import ${SABAYON_MOLECULE_HOME:-/sabayon}/molecules/armelv5-base.common
 %env %import ${SABAYON_MOLECULE_HOME:-/sabayon}/molecules/buffalo_ls_chlv2.common
 
 # Release desc (the actual release description)

molecules/sablink-armel-buffalo_ls_pro_live-20G.spec

@@ -1,4 +1,4 @@
-%env %import ${SABAYON_MOLECULE_HOME:-/sabayon}/molecules/armel-base.common
+%env %import ${SABAYON_MOLECULE_HOME:-/sabayon}/molecules/armelv5-base.common
 %env %import ${SABAYON_MOLECULE_HOME:-/sabayon}/molecules/buffalo_ls_pro_live.common
 
 # Release desc (the actual release description)

molecules/sablink-armel-buffalo_ls_xhl-20G.spec

@@ -1,4 +1,4 @@
-%env %import ${SABAYON_MOLECULE_HOME:-/sabayon}/molecules/armel-base.common
+%env %import ${SABAYON_MOLECULE_HOME:-/sabayon}/molecules/armelv5-base.common
 %env %import ${SABAYON_MOLECULE_HOME:-/sabayon}/molecules/buffalo_ls_xhl.common
 
 # Release desc (the actual release description)

molecules/sablink-armel-medion_stg212-20G.spec

@@ -0,0 +1,24 @@
+%env %import ${SABAYON_MOLECULE_HOME:-/sabayon}/molecules/armelv6-base.common
+%env %import ${SABAYON_MOLECULE_HOME:-/sabayon}/molecules/medion_stg212.common
+
+# Release desc (the actual release description)
+release_desc: armelv6j Medion STG-212
+
+# Release Version (used to generate release_file)
+release_version: 0
+
+# Specify image file name (image file name will be automatically
+# produced otherwise)
+image_name: SabLink_Linux_0_armelv6j_medion_stg212_20GB.img
+
+# Specify the image file size in Megabytes. This is mandatory.
+# To avoid runtime failure, make sure the image is large enough to fit your
+# chroot data.
+image_mb: 20000
+
+# Path to boot partition data (MLO, u-boot.img etc)
+%env source_boot_directory: ${SABAYON_MOLECULE_HOME:-/sabayon}/boot/arm/medion_stg212
+
+# External script that will generate the image file.
+# The same can be copied onto a MMC by using dd
+%env image_generator_script: ${SABAYON_MOLECULE_HOME:-/sabayon}/scripts/medion_stg212_image_generator_script.sh

scripts/buffalo_ls_chlv2_image_generator_script.sh

@@ -6,4 +6,4 @@ export SABAYON_MOLECULE_HOME
 
 # rootfs and bootfs tarball is generated by beaglebone image
 export MAKE_TARBALL="0"
-exec "${SABAYON_MOLECULE_HOME}"/scripts/mkloopgptdisk.sh "${SABAYON_MOLECULE_HOME}"/scripts/mkloopgptdisk_buffalo_ls_xhl_chroot_hook.sh "$@"
+exec "${SABAYON_MOLECULE_HOME}"/scripts/mkloopgptdisk.sh "${SABAYON_MOLECULE_HOME}"/scripts/mkloopgptdisk_buffalo_ls_chlv2_chroot_hook.sh "$@"

scripts/buffalo_ls_xhl_image_generator_script.sh

@@ -6,4 +6,4 @@ export SABAYON_MOLECULE_HOME
 
 # rootfs and bootfs tarball is generated by beaglebone image
 export MAKE_TARBALL="0"
-exec "${SABAYON_MOLECULE_HOME}"/scripts/mkloopgptdisk.sh "${SABAYON_MOLECULE_HOME}"/scripts/mkloopgptdisk_buffalo_ls_xhl_chroot_hook.sh "$@"
+exec "${SABAYON_MOLECULE_HOME}"/scripts/mkloopgptdisk-oxnas.sh "${SABAYON_MOLECULE_HOME}"/scripts/mkloopgptdisk_buffalo_ls_xhl_chroot_hook.sh "$@"

scripts/medion_stg212_image_generator_script.sh

@@ -0,0 +1,9 @@
+#!/bin/sh
+
+# Path to molecules.git dir
+SABAYON_MOLECULE_HOME="${SABAYON_MOLECULE_HOME:-/sabayon}"
+export SABAYON_MOLECULE_HOME
+
+# rootfs and bootfs tarball is generated by beaglebone image
+export MAKE_TARBALL="0"
+exec "${SABAYON_MOLECULE_HOME}"/scripts/mkloopgptdisk-oxnas.sh "${SABAYON_MOLECULE_HOME}"/scripts/mkloopgptdisk_medion_stg212_chroot_hook.sh "$@"

scripts/mkloopgptdisk-oxnas.sh

@@ -0,0 +1,301 @@
+#! /bin/sh
+# (c) Copyright 2012 Fabio Erculiani <lxnay@sabayon.org>
+# Licensed under terms of GPLv2
+
+env-update
+. /etc/profile
+
+export LC_ALL=en_US.UTF-8
+
+# Path to molecules.git dir
+SABAYON_MOLECULE_HOME="${SABAYON_MOLECULE_HOME:-/sabayon}"
+export SABAYON_MOLECULE_HOME
+
+# Expected env variables:
+# PATHS_TO_REMOVE = ";" separated list of paths to rm -rf
+# PATHS_TO_EMPTY = ";" separated list of paths to rm -rf (keeping the dir)
+# RELEASE_STRING
+# RELEASE_VERSION
+# RELEASE_DESC
+# RELEASE_FILE
+# IMAGE_NAME
+# DESTINATION_IMAGE_DIR
+# PACKAGES_TO_ADD
+# PACKAGES_TO_REMOVE
+
+if [ ${#} -ne 5 ]; then
+	echo "usage: ${0} <path to regular file containing the image> <size in Mb> <source boot files dir> <source chroot>"
+	exit 1
+fi
+
+CHROOT_SCRIPT="${1}"
+if [ ! -x "${CHROOT_SCRIPT}" ]; then
+	echo "${CHROOT_SCRIPT} is not executable"
+	exit 1
+fi
+FILE="${2}"
+SIZE="${3}"
+BOOT_DIR="${4}"
+CHROOT_DIR="${5}"
+# Should we make a tarball of the rootfs and bootfs?
+MAKE_TARBALL="${MAKE_TARBALL:-1}"
+# Boot partition type
+BOOT_PART_TYPE="${BOOT_PART_TYPE:-ext2}"
+BOOT_PART_TYPE_GPT="${BOOT_PART_TYPE_GPT:-8300}"
+BOOT_PART_MKFS_ARGS="${BOOT_PART_MKFS_ARGS:--L Boot -I 128}"
+# Root partition type
+ROOT_PART_TYPE="${ROOT_PART_TYPE:-btrfs}"
+ROOT_PART_MKFS_ARGS="${ROOT_PART_MKFS_ARGS:--L SabLink}"
+# Swap partiton arguments
+SWAP_PART_MKFS_ARGS="${SWAP_PART_MKFS_ARGS:--L Swap}"
+# Copy /boot content from Root partition to Boot partition?
+BOOT_PART_TYPE_INSIDE_ROOT="${BOOT_PART_TYPE_INSIDE_ROOT:-1}"
+
+cleanup_loopbacks() {
+	cd /
+	sync
+	sync
+	sleep 5
+	sync
+	[[ -n "${tmp_file}" ]] && rm "${tmp_file}" 2> /dev/null
+	[[ -n "${tmp_dir}" ]] && { umount "${tmp_dir}/proc" &> /dev/null; }
+	[[ -n "${tmp_dir}" ]] && { umount "${tmp_dir}" &> /dev/null; rmdir "${tmp_dir}" &> /dev/null; }
+	[[ -n "${boot_tmp_dir}" ]] && { umount "${boot_tmp_dir}" &> /dev/null; rmdir "${boot_tmp_dir}" &> /dev/null; }
+	sleep 1
+	[[ -n "${boot_part}" ]] && losetup -d "${boot_part}" 2> /dev/null
+	[[ -n "${root_part}" ]] && losetup -d "${root_part}" 2> /dev/null
+	[[ -n "${DRIVE}" ]] && losetup -d "${DRIVE}" 2> /dev/null
+	# make sure to have run this
+	[[ -n "${tmp_dir}" ]] && CHROOT_DIR="${tmp_dir}" "${SABAYON_MOLECULE_HOME}"/scripts/mmc_remaster_post.sh
+}
+trap "cleanup_loopbacks" 1 2 3 6 9 14 15 EXIT
+
+# Erase the file
+echo "Generating the empty image file at ${FILE}"
+dd if=/dev/zero of="${FILE}" bs=1024000 count="${SIZE}"
+[[ "$?" != "0" ]] && exit 1
+
+echo "Configured the loopback partition at ${FILE}"
+
+
+echo "Adding the Stage1 loader the proper Das uBoot and the ext2load uEnv to ${FILE}"
+pushd "${SABAYON_MOLECULE_HOME}"/scripts/oxnas/
+./disc_create ${FILE}
+popd
+
+# Calculate size using fdisk
+SIZE=$(sgdisk -p "${FILE}" | grep First | awk '{print $10}')
+# Magic first partition size, given 300MB below
+BOOTSIZE="616447"
+BOOTOFFSET="2048"
+SWAPSIZE="4194304"
+
+echo "Disk size    : ${SIZE} Sectors"
+echo "Disk sectors : ${SECTORS}"
+echo "Magic size   : Sector ${BOOTSIZE} (boot part size 300MB)"
+echo "Start offset : Sector ${BOOTOFFSET}"
+
+# this will create a first partition that is 300MB long
+# Starts at sect 2048, ends at sect 616447, each sector is 512bytes
+sgdisk -n 1:${BOOTOFFSET}:${BOOTSIZE} -t 1:${BOOT_PART_TYPE_GPT} ${FILE}
+
+# Start of Root is 1 sector after the Boot Part
+ROOTOFFSET=$((BOOTSIZE+1))
+# Swap starts 2GB bevore end of Disk
+SWAPOFFSET=$((SIZE-SWAPSIZE))
+# root ends 1 sector before swap starts
+ROOTSIZE=$((SWAPOFFSET-1))
+sgdisk -n 2:${ROOTOFFSET}:${ROOTSIZE} -t 2:${BOOT_PART_TYPE_GPT} ${FILE}
+sgdisk -n 3:${SWAPOFFSET}:${SIZE} -t 3:8200 ${FILE}
+
+echo "create compatibility hybrid MBR"
+# sgdisk still not support the possibility to make the ee part non 1
+echo "r
+h
+1
+n
+83
+y
+n
+w
+y" | gdisk ${FILE}
+
+sleep 2
+
+sgdisk -p "${FILE}"
+
+# each sector has 512bytes
+LOOPDEVICE=$(kpartx -v -l "${FILE}" | grep deleted | awk '{print $4}')
+echo "Loop Device ${LOOPDEVICE}"
+LOOPNAME=${LOOPDEVICE##*/}
+echo "Loop Device Name ${LOOPNAME}"
+
+echo "Create loop devces"
+# Get two loopback devices first
+part=$(kpartx -v -a "${FILE}")
+if [ -z "${part}" ]; then
+	echo "Cannot setup the partitions loopbacks"
+	exit 1
+fi
+
+boot_part="/dev/mapper/${LOOPNAME}p1"
+root_part="/dev/mapper/${LOOPNAME}p2"
+swap_part="/dev/mapper/${LOOPNAME}p3"
+
+echo "Boot Partiton at   : ${boot_part}"
+echo "Root Partition at : ${root_part}"
+
+# Format boot
+echo "Formatting ${BOOT_PART_TYPE} ${boot_part}..."
+"mkfs.${BOOT_PART_TYPE}" ${BOOT_PART_MKFS_ARGS} "${boot_part}" || exit 1
+
+# Format extfs
+echo "Formatting ${ROOT_PART_TYPE} ${root_part}..."
+"mkfs.${ROOT_PART_TYPE}" ${ROOT_PART_MKFS_ARGS} "${root_part}" || exit 1
+
+# Format swap
+echo "Formatting swap ${swap_part}..."
+"mkswap" ${SWAP_PART_MKFS_ARGS} "${swap_part}" || exit 1
+
+boot_tmp_dir=$(mktemp -d)
+if [[ -z "${boot_tmp_dir}" ]]; then
+	echo "Cannot create temporary dir (boot)"
+	exit 1
+fi
+chmod 755 "${boot_tmp_dir}" || exit 1
+
+tmp_dir=$(mktemp -d)
+if [[ -z "${tmp_dir}" ]]; then
+	echo "Cannot create temporary dir"
+	exit 1
+fi
+chmod 755 "${tmp_dir}" || exit 1
+
+sleep 2
+sync
+
+echo "Setting up the boot directory content, mounting on ${boot_tmp_dir}"
+mount "${boot_part}" "${boot_tmp_dir}"
+cp -R "${BOOT_DIR}"/* "${boot_tmp_dir}"/ || exit 1
+
+echo "Setting up the extfs directory content, mounting on ${tmp_dir}"
+mount "${root_part}" "${tmp_dir}"
+rsync -a -H -A -X --delete-during "${CHROOT_DIR}"/ "${tmp_dir}"/ --exclude "/proc/*" --exclude "/sys/*" \
+	--exclude "/dev/pts/*" --exclude "/dev/shm/*" || exit 1
+
+CHROOT_DIR="${tmp_dir}" "${SABAYON_MOLECULE_HOME}"/scripts/remaster_pre.sh || exit 1
+
+# Configure 00-board-setup.start
+source_board_setup="${SABAYON_MOLECULE_HOME}/boot/arm_startup/00-board-setup.start"
+dest_board_setup="${CHROOT_DIR}/etc/local.d/00-board-setup.start"
+if [ -f "${source_board_setup}" ]; then
+	echo "Setting up ${dest_board_setup}"
+	cp "${source_board_setup}" "${dest_board_setup}" || exit 1
+	chmod 755 "${dest_board_setup}" || exit 1
+	chown root:root "${dest_board_setup}" || exit 1
+fi
+
+# execute PACKAGES_TO_ADD and PACKAGES_TO_REMOVE
+export ETP_NONINTERACTIVE=1
+# Entropy doesn't like non-UTF locale encodings
+export LC_ALL=en_US.UTF-8
+
+# do I have to run "equo update?"
+# If we are running outside the DAILY scope, it's
+# better to do it here. If instead we're doing a
+# DAILY, this is already done by other scripts.
+if [ -z "$(basename ${IMAGE_NAME} | grep DAILY)" ]; then
+	FORCE_EAPI=2 chroot "${tmp_dir}" equo update || \
+	FORCE_EAPI=2 chroot "${tmp_dir}" equo update || \
+		exit 1
+fi
+
+if [ -n "${PACKAGES_TO_ADD}" ]; then
+	add_cmd="equo install ${PACKAGES_TO_ADD}"
+	chroot "${tmp_dir}" ${add_cmd} || exit 1
+fi
+if [ -n "${PACKAGES_TO_REMOVE}" ]; then
+	rem_cmd="equo remove ${PACKAGES_TO_REMOVE}"
+	chroot "${tmp_dir}" ${rem_cmd} || exit 1
+fi
+
+# execute CHROOT_SCRIPT hook inside chroot
+chroot_script_name=$(basename "${CHROOT_SCRIPT}")
+target_chroot_script="${tmp_dir}"/"${chroot_script_name}"
+cp -p "${CHROOT_SCRIPT}" "${target_chroot_script}" || exit 1
+chmod 700 "${target_chroot_script}" || exit 1
+chown root "${target_chroot_script}" || exit 1
+chroot "${tmp_dir}" "/${chroot_script_name}" || exit 1
+rm -f "${target_chroot_script}"
+
+CHROOT_DIR="${tmp_dir}" "${SABAYON_MOLECULE_HOME}"/scripts/mmc_remaster_post.sh
+
+# execute final cleanup of entropy stuff
+chroot "${tmp_dir}" equo rescue vacuum
+
+# setup sudoers, enable wheel group
+if [ -f "${tmp_dir}/etc/sudoers" ]; then
+	echo "# added by Sabayon Molecule" >> "${tmp_dir}/etc/sudoers"
+	echo "%wheel  ALL=ALL" >> "${tmp_dir}/etc/sudoers"
+fi
+
+export LC_ALL=C
+
+# work out paths to empty and paths to remove
+if [ -n "${PATHS_TO_REMOVE}" ]; then
+	set -f
+	for path in $(echo ${PATHS_TO_REMOVE} | tr ";" "\n"); do
+		echo "Removing: ${path}"
+		set +f
+		rm -rf "${tmp_dir}"/${path}
+		set -f
+	done
+	set +f
+fi
+if [ -n "${PATHS_TO_EMPTY}" ]; then
+	set -f
+	for path in $(echo ${PATHS_TO_EMPTY} | tr ";" "\n"); do
+		set +f
+		echo "Emptying: ${path}"
+		rm -rf "${tmp_dir}"/"${path}"/*
+		set -f
+	done
+	set +f
+fi
+
+if [ -n "${RELEASE_FILE}" ]; then
+	release_file="${tmp_dir}"/"${RELEASE_FILE}"
+	release_dir=$(dirname "${release_file}")
+	[[ ! -d "${release_dir}" ]] && { mkdir -p "${release_dir}" || exit 1; }
+	echo "${RELEASE_STRING} ${RELEASE_VERSION} ${RELEASE_DESC}" > "${release_file}"
+fi
+
+# BOOT_PART_TYPE_INSIDE_ROOT
+if [ -n "${BOOT_PART_TYPE_INSIDE_ROOT}" ]; then
+	echo "Copying data from ${tmp_dir}/boot to ${boot_tmp_dir} as requested..."
+	cp -Rp "${tmp_dir}/boot/"* "${boot_tmp_dir}/" || exit 1
+fi
+umount "${boot_tmp_dir}" || exit 1
+
+
+if [ -n "${DESTINATION_IMAGE_DIR}" ] && [ "${MAKE_TARBALL}" = "1" ]; then
+	# Create the rootfs tarball
+	ROOTFS_TARBALL="${DESTINATION_IMAGE_DIR}/${IMAGE_NAME}.rootfs.tar.xz"
+	echo "Creating the roofs tarball: ${ROOTFS_TARBALL}"
+	tmp_file=$(mktemp --suffix=.tar.xz)
+	[[ -z "${tmp_file}" ]] && exit 1
+	cd "${tmp_dir}" || exit 1
+	tar --numeric-owner --preserve-permissions --same-owner -cJf "${tmp_file}" ./ || exit 1
+	mv "${tmp_file}" "${ROOTFS_TARBALL}" || exit 1
+	chmod 644 "${ROOTFS_TARBALL}" || exit 1
+	cd "$(dirname "${ROOTFS_TARBALL}")" || exit 1
+	md5sum "$(basename "${ROOTFS_TARBALL}")" > "$(basename "${ROOTFS_TARBALL}")".md5
+fi
+
+umount "${tmp_dir}" || exit 1
+
+cleanup_loopbacks
+
+kpartx -v -d "${FILE}"
+kpartx -v -d "${FILE}"
+echo "Your GPT Disk image \"${FILE}\" is ready"

scripts/mkloopgptdisk_medion_stg212_chroot_hook.sh

@@ -0,0 +1,105 @@
+#!/bin/sh
+# This script is executed inside the image chroot before packing up.
+# Architecture/platform specific code goes here, like kernel install
+# and configuration
+
+env-update
+. /etc/profile
+
+setup_boot() {
+	# enable sshd by default
+	rc-update add sshd default
+	# enable logger by default
+	rc-update add syslog-ng boot
+	rc-update add vixie-cron boot
+	# Linkstation Pro/Live Deamon
+	rc-update add ntp-client default
+	rc-update add ntpd default
+	# enable dbus, of course, and also NetworkManager
+	rc-update add dbus boot
+
+	# we are on eth0 in the Medion STG-212 so create the init.d link
+	ln -sf net.lo /etc/init.d/net.eth0
+	rc-update add net.eth0 default
+
+	# select the first available kernel
+	eselect uimage set 1
+
+	# cleaning up deps
+	rc-update --update
+}
+
+setup_startup_caches() {
+	mount -t proc proc /proc
+	/lib/rc/bin/rc-depend -u
+	# Generate openrc cache
+	[[ -d "/lib/rc/init.d" ]] && touch /lib/rc/init.d/softlevel
+	[[ -d "/run/openrc" ]] && touch /run/openrc/softlevel
+	/etc/init.d/savecache start
+	/etc/init.d/savecache zap
+	ldconfig
+	ldconfig
+	umount /proc
+}
+
+
+setup_users() {
+	# setup root password to... root!
+	echo root:sablink | chpasswd
+}
+
+setup_serial() {
+	# setup serial login
+	sed -i "s:^s0.*::" /etc/inittab
+	echo "s0:12345:respawn:/sbin/agetty 115200 ttyS0 vt100" >> /etc/inittab
+}
+
+setup_fallback_network() {
+	# setup fallback network
+	echo "" >> /etc/conf.d/net
+	echo "" >> /etc/conf.d/net
+	echo "# Sablink Core Network Config" >> /etc/conf.d/net
+	echo "#" >> /etc/conf.d/net
+	echo "# DHCP IP / route configuration, with fallback to a static IP / route" >> /etc/conf.d/net
+	echo "#" >> /etc/conf.d/net
+	echo "" >> /etc/conf.d/net
+	echo "config_eth0=\"dhcp\"" >> /etc/conf.d/net
+	echo "fallback_eth0=\"192.168.178.103 netmask 255.255.255.0 broadcast 192.168.178.255\"" >> /etc/conf.d/net
+	echo "fallback_route_eth0=\"default via 192.168.178.1\"" >> /etc/conf.d/net
+	echo "" >> /etc/conf.d/net
+	echo "" >> /etc/conf.d/net
+	echo "#" >> /etc/conf.d/net
+	echo "# pure static IP / route configuration, should the above not work even with fallback.." >> /etc/conf.d/net
+	echo "# (in that case, comment the whole DHCP section and uncomment this one)" >> /etc/conf.d/net
+	echo "#" >> /etc/conf.d/net
+	echo "" >> /etc/conf.d/net
+	echo "#config_eth0=\"192.168.11.3 netmask 255.255.255.0 broadcast 192.168.11.255\"" >> /etc/conf.d/net
+	echo "#routes_eth0=\"default via 192.168.11.1\"" >> /etc/conf.d/net
+	echo "" >> /etc/conf.d/net
+	echo "" >> /etc/conf.d/net
+	echo "" >> /etc/conf.d/net
+	echo "#" >> /etc/conf.d/net
+	echo "# DNS configuration" >> /etc/conf.d/net
+	echo "#" >> /etc/conf.d/net
+	echo "" >> /etc/conf.d/net
+	echo "dns_servers_eth0=\"192.168.178.1\"" >> /etc/conf.d/net
+}
+
+setup_fstab() {
+	sed -e "s!/BOOT!/sda1!g" -e "s!/ROOT!/sda2!g" -e "s!SWAP!sda3!g" -e "s!ext3!btrfs!g" -i /etc/fstab
+}
+
+setup_layman() {
+	sed -e "s!/source!/#source!g" -i /etc/make.conf
+}
+
+setup_users
+setup_boot
+setup_serial
+setup_startup_caches
+setup_fallback_network
+setup_fstab
+setup_layman
+
+exit 0
+

scripts/oxnas/disk_create

@@ -0,0 +1,47 @@
+#!/bin/sh
+
+[ "x$1" == "x"] && {
+    echo "Usage: $0 hard-disk-device"
+    exit 1
+}
+
+# uncomment line below and set to the correct disk
+disk=$1
+
+workarea="."
+
+stage1File=$workarea/stage1.wrapped
+ubootFile=$workarea/u-boot.wrapped
+ubootenvFile=$workarea/u-boot.env
+
+perl <<EOF | dd of="$disk" bs=512
+    print "\x00" x 0x1a4;
+    print "\x00\x5f\x01\x00";
+    print "\x00\xdf\x00\x00";
+    print "\x00\x80\x00\x00";
+    print "\x00" x (0x1b0 -0x1a4 -12 );
+    print "\x22\x80\x00\x00";
+    print "\x22\x00\x00\x00";
+    print "\x00\x80\x00\x00";
+EOF
+
+if [ -f $stage1File ];then
+	echo "Writing stage 1"
+	dd if=$stage1File    of="$disk" bs=512 seek=34
+fi
+
+if [ -f $ubootFile ];then
+	echo "Writing uboot"
+	dd if=$ubootFile     of="$disk" bs=512 seek=154
+fi
+
+	echo "Generating uboot env"
+pushd $workarea/u-boot-env
+./creatext2loadenv.sh
+popd
+
+if [ -f $ubootenvFile ];then
+	echo "Writing uboot env"
+	dd if=$ubootenvFile     of="$disk" bs=512 seek=558
+fi
+

scripts/oxnas/stage1.wrapped

@@ -0,0 +1 @@
+stage1/stage1.wrapped850

scripts/oxnas/u-boot-env/creatext2loadenv.sh

@@ -0,0 +1,34 @@
+#!/bin/sh
+
+echo "Generating U-Boot Environment"
+echo -en "\0\0\0\0" >uboot.env
+echo -en "bootargs=mac_adr=0x00,0xd0,0xb8,0x19,0x81,0xfb\0" >>uboot.env
+echo -en "baudrate=115200\0" >>uboot.env
+echo -en "loads_echo=0\0" >>uboot.env
+echo -en "rootpath=/nfs/arm\0" >>uboot.env
+echo -en "ethact=egiga0\0" >>uboot.env
+echo -en "ethaddr=00:16:01:41:4E:2B\0" >>uboot.env
+echo -en "ipaddr=192.168.11.150\0" >>uboot.env
+echo -en "serverip=192.168.11.1\0" >>uboot.env
+echo -en "stdin=serial\0" >>uboot.env
+echo -en "stdout=serial\0" >>uboot.env
+echo -en "stderr=serial\0" >>uboot.env
+echo -en "ethprime=egiga0\0" >>uboot.env
+echo -en "initrd=uInitrd\0" >>uboot.env
+echo -en "kernel=uImage\0" >>uboot.env
+echo -en "bootargs_base=console=ttyS0,115200\0" >>uboot.env
+echo -en "bootargs_root=root=/dev/sda2 rw\0" >>uboot.env
+echo -en "def_tftp=tftp 0x60100000 \${kernel};tftp 0x60800000 \${initrd};setenv bootargs_new \${bootargs};setenv bootargs \${bootargs_base} \${bootargs_root} \${bootargs_new} tftpboot=yes;bootm 0x60100000 0x60800000\0" >>uboot.env
+echo -en "bootdelay=3\0" >>uboot.env
+echo -en "force_tftp=1\0" >>uboot.env
+echo -en "bootcmd=ide reset; ext2load ide 0:1 0x60100000 /\${kernel};ext2load ide 0:1 0x60800000 /\${initrd};setenv bootargs_new \${bootargs};setenv bootargs \${bootargs_base} \${bootargs_root} \${bootargs_new};bootm 0x60100000 0x60800000\0" >>uboot.env
+echo -en "\0" >>uboot.env
+
+if [ ! -e ./ubootcrc-8192bytes ] ; then
+    echo "Compiling CRC calculation tool"
+    gcc -o ubootcrc-8192bytes ubootcrc-8192bytes.c
+fi
+echo "Finalizing U-Boot Environment"
+./ubootcrc-8192bytes <uboot.env >uboot.newenv
+
+echo "uboot.newenv contains a valid environment for SATA disk"

scripts/oxnas/u-boot-env/ubootcrc-8192bytes.c

@@ -0,0 +1,115 @@
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+
+/* ========================================================================
+ * Table of CRC-32's of all single-byte values (made by make_crc_table)
+ */
+const uint32_t crc_table[256] = {
+  0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
+  0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
+  0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
+  0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
+  0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
+  0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
+  0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
+  0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
+  0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
+  0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
+  0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
+  0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
+  0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
+  0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
+  0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
+  0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
+  0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
+  0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
+  0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
+  0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
+  0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
+  0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
+  0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
+  0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
+  0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
+  0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
+  0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
+  0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
+  0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
+  0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
+  0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
+  0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
+  0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
+  0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
+  0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
+  0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
+  0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
+  0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
+  0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
+  0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
+  0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
+  0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
+  0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
+  0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
+  0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
+  0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
+  0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
+  0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
+  0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
+  0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
+  0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
+  0x2d02ef8dL
+};
+
+
+/* ========================================================================= */
+#define DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8);
+#define DO2(buf)  DO1(buf); DO1(buf);
+#define DO4(buf)  DO2(buf); DO2(buf);
+#define DO8(buf)  DO4(buf); DO4(buf);
+
+/* ========================================================================= */
+uint32_t crc32(uint32_t crc, const uint8_t* buf, unsigned int len)
+{
+    crc = crc ^ 0xffffffffL;
+    while (len >= 8)
+    {
+      DO8(buf);
+      len -= 8;
+    }
+    if (len) do {
+      DO1(buf);
+    } while (--len);
+    return crc ^ 0xffffffffL;
+}
+
+int main(int argc, char* argv[])
+{
+    char data[8188];
+    uint32_t crc;
+    uint32_t oldcrc;
+    uint8_t crcdata[4];
+    
+    memset(data, 0, sizeof(data));
+    
+    if(1 != fread(crcdata, 4, 1, stdin))
+    {
+        return 3;
+    }
+    oldcrc = crcdata[0] | (crcdata[1] << 8) | (crcdata[2] << 16) | (crcdata[3] << 24);
+    if(0 >= fread(data, 1, 8188, stdin))
+    {
+        return 3;
+    }
+    crc = crc32(0, data, 8188);
+    fprintf(stderr, "CRC32: %08x\n", crc);
+    fprintf(stderr, "Env CRC32: %08x\n", oldcrc);
+    
+    crcdata[0] = crc & 0xFF;
+    crcdata[1] = (crc >> 8) & 0xFF;
+    crcdata[2] = (crc >> 16) & 0xFF;
+    crcdata[3] = (crc >> 24) & 0xFF;
+    
+    fwrite(crcdata, 1, 4, stdout);
+    fwrite(data, 1, 8188, stdout);
+    return 0;
+}

scripts/oxnas/u-boot.env

@@ -0,0 +1 @@
+u-boot-env/uboot.newenv

scripts/oxnas/u-boot.wrapped

@@ -0,0 +1 @@
+u-boot/u-boot.wrapped

scripts/oxnas/uImage

@@ -0,0 +1 @@
+uImages/uImage