mars-nwe/doc/old/nw.ini

#
# This is the configuration-file for "mars_nwe", a free netware-emulator
# for Linux.
#
# last changed: 01-Sep-00
# new volume flag 'x' for unix access rights (Przemyslaw Czerpak) 0.99.pl20
# comment out second printer and printserver entry in 0.99.pl20
# debug log section changed some values to '1' in 0.99.pl20
#
# !! section 31 : flags added in 0.99.pl18, but not used
# !! section  8 : new flags added in 0.99.pl18  !!
# !! section  9 : default directory/file umask changed in 0.99.pl9  !!
# !! section 46 : default attrib location changed in 0.99.pl9 !!
# !! section  5 : deleting of ipx devices/routes changed in 0.99.pl6 !!
# !! section  4 : automatic creation of ipx-interfaces changed in 0.98.pl9 !!
#
# since version 0.98.pl11:
# the most important options in config.h can now be altered in
# this file begin at section 60.
#
# Most configuration errors depend on section 4.
# !! Please read section 4 very carefully. !!
#

# This file specifies which Linux-resources (printers, users, directories)
# should be accessible to the DOS-clients via "mars_nwe". Furthermore
# some general parameters are configured here.
# Some options of "mars_nwe" can only be altered by editing the the file
# `config.h' and re-compiling "mars_nwe", please see there for more
# information.


# Syntax of this config-file:
#       - everything after a "#" is treated as a comment (particularly
#         it does never belong to the values themselves)
#       - entries _must_ begin with a number, indicating the section
#         they belong to
#       - hexadecimal values are prepended by "0x"
#
# All examples are verbatim.
#
# The term "DOS-client" does not refer to the special operating-system
# "DOS" in _this_ file. "DOS-client" is only a synomym for all possible
# ipx-clients (it's choosen for the people who are confused by the
# meaning of "client" and "server").
# The "Linux-side" of the game is always the "mars_nwe"-server.


# =========================================================================
# Section 1: volumes (required)
#
# In this section you list all Linux-directories accessible via "mars_nwe".
#
# To be more precise: a mapping from Linux-directories to mars_nwe-volumes
# is done. (Volumes are the beasts you can map to drive letters under DOS
# using "map.exe").
#
# Linux-directory               mars_nwe-volume    map.exe      DOS-Drive
# /var/local/nwe/SYS  ------->  SYS             ------------->  W:
#
# More than one entry is allowed in this section.
# The maximum number of volumes must be specified in `config.h'
# or in section 61 in this file.
#
# Please note that at least the volume "SYS" must be defined and it must
# contain the following sub-directories: LOGIN, PUBLIC, SYSTEM, MAIL.
# See the installation-instructions in the doc-directory for more infos
# and the info to section 16 (tests on startup) in this file.
#
# !! NOTE !!
# First defined volume should always named 'SYS'.
#
#
# -------------------------------------------------------------------------
# Syntax:
#       1       VOLUMENAME  DIRECTORY  [OPTIONS]  [UMASKDIR UMASKFILE]
#
# VOLUMENAME:   the name of the mars_nwe-volume (max. 8 characters)
# DIRECTORY:    the directory on your Linux-system associated with that
#               volume; use the special name "~" to refer to the users
#               individual home-directory.
#               A directory entry like "~/tmp" also work since 0.99.pl3.
#
# If the netadmin wants to map the homedirectories with the MAP-Command to
# every user, he can do it in two variants:
# We suppose that the user test2 is logged in MARS_NWE. He has files
# earlier stored in his homedirectory /home/test2.
# In case of entry 1 in /etc/nwserv.conf (naturally amongst other entries)
# there are other results of the MAP-command.
#
#			Variant 1			Variant 2
#
#DOS-Command		MAP H:=MARS\HOMEDIR:		MAP H:=MARS\HOMEDIR:
#
#Entry in /etc/nwserv.conf
#			1 HOMEDIR ~ k			1 HOMEDIR /home k
#
#Result of DIR *.*	All files stored in		All homedirs of the
#			/home/test2 will shown.		users will shown.
#							Showing his own files
#							it is a command like
#							CD test2  and then
#							dir *.*	necessary.
#
# OPTIONS:      none or some of the following characters (without a seperator)
#       -       Placeholder.
#
#               Next two options control DOS and OS/2 namespace.
#       i       ignore case, handle mixing upper/lowercase filenames (slow)
#               should only be used if you really need it.
#       k       use lowercase-filenames (if you don't set this,
#               and you don't set 'i' all files _must_ be upper-case)
#
#       m       removable volume (e.g. cd-roms) or volumes, which
#               should be remountable when mars_nwe is running.
#       n       (n)o fixed inodes. This volume do not have fixed inodes.
#               e.g. DOS-Volumes, CD-ROMS. This flag is very important for
#               attrib and trustee handling.
#       o       (lowercase o)
#               volume has only one filesystem/device/namespace
#               this is for filesystems with high inode > 0xFFFFFFF.
#               because for namespace services mars_nwe normally use the
#               first 4 bit of 32 bit inode for distinguish
#               between several devices/namespaces for one volume.
#       p       "PIPE"-filesystem. All files are pipe commands.
#               See `doc/PIPE-FS'.
#       r       volume is read-only and always reports "0 byte free"
#               (this is intended for copies of CD-ROMs on harddisks)
#       t       volume has trustees.
#               Real access is trustee rights + unix rights.
#               Trustees are stored in extra directories,
#               normally under /var/nwserv/trustees.
#               Must only be used for volume which have fix inodes.
#               A volume with trustees should never be renamed.
#               For some more notes see 'doc/TRUSTEES'.
#       x       use unix access rights (for use with ACL)
#       T       volume has trustees & ignore the rights granted in UN*X filesystem
#               exactly like option "t" except that the unix rights are not added
#
#               additional Namespaces
#       O       (uppercase o)
#               + OS/2 namespace (useful for Win95 clients, see doc/FAQS).
#       N       + NFS  namespace (not really tested).
#
#
# UMASKDIR:  default directory creat umask.
# UMASKFILE: default file creat umask.
#            values are always octal, they overwrite standard
#            section 9 values for this specific volume.
#
# -------------------------------------------------------------------------
#
# Examples:
#       1       SYS             /var/local/nwe/SYS      kt  711 600
#       1       CDROM           /cdrom                  kmnor
#       1       HOME            ~                       k     -1
#       1       HOMETMP         ~/tmp                   kiO
#       1       PRIVAT          ~/privat                kO   700 600
#       1       WORLD           /var/world              kiO  777 666
#       1       FAXQ            /var/spool/fax/faxqueue k

        1       SYS             /u3/SYS/                kt   711 600


# =========================================================================
# Section 2: servername (optional)
#
# The servername is the name under which this server will show up when
# using tools like "slist" (server-list).
#
# If you don't supply an entry for this section, the hostname of your
# Linux-machine will be converted to all-uppercase and used as the servername.
#
# -------------------------------------------------------------------------
# Syntax:
#       2       SERVERNAME
#
# SERVERNAME:   a name for this nw-server
# -------------------------------------------------------------------------
#
# Example:
#       2       MARS    # name of the server would be "MARS"


# =========================================================================
# Section 3: Number of the internal network (required)
#
# If have dealt with the TCP/IP-configuration of your Linux-Box, the term
# "ip-address" may be familiar to you. It's a numer that uniquely
# identifies your machine in the internet.
# As you might already expect, even the IPX-people use a unique number to
# identify each other. Addresses in the IPX-world always consist of a
# 4-byte "network-number" plus a 6-byte "node-number" (remember the
# ip-addresses also use 4-bytes).
#
# The numbering-rule for ipx-clients is easy: their "address" is the
# external-network of the server they are connected to plus the
# hardware-address of their own ethernet-card (6 byte). As a result of this
# rule, the clients can determine their address automatically (by listening
# to the server and looking at their own ethernet-hardware) and no
# configuration-files on the clients-side have to be maintained. (It would
# really be a nasty thing if you think of very many DOS-clients [remember:
# DOS is an OS where ordinary users can screw up the configuration files].)
#
# For internal routing purposes, a netware-server has an "internal network"
#
# As there is no organisation which regulates the use of network-numbers
# in the IPX-world, you have to run "slist" (under DOS or Linux) to
# determine a number that isn't already used by another server on your
# net. You better double-check and ask the other network administrators
# before using a random value because not all servers might be on-line when
# you "listen" to the net.
#
# A reasonable choice for the internal net-number of your mars_nwe-server
# could be the ip-address of your Linux-Box. It is reasonable because
# ip-addresse are unique and if every nw-administrator uses only this uniqe
# value, potential conflicts will be minimized. Of course this choice is
# no guarantee and it only works if your Linux-Box IP is well configured.
#
# Please note that you have to specify the address of your "internal
# ipx-network" in hexadecimal format (the leading "0x" indicates it).
#
#
# -------------------------------------------------------------------------
# Syntax:
#       3       INTERNAL_NET    [NODE]
#
# INTERNAL_NET: the hexadecimal value of your "internal ipx-network". Use
#               "0x0" or "auto" to refer to your ip-addresse (it's a kind of
#               automagically setup)
# NODE:         use "1" if you don't know what this entry is for (optional)
# -------------------------------------------------------------------------
#
# Example:
#       3       auto  1  # 'automatic' setup, use ip-number as internal net

        3       auto


# =========================================================================
# Section 4: IPX-devices (strongly recommended)
#
# This section contains information for the ipx-router built into mars_nwe
# and/or the external program "nwrouted".
# Both processes exchange the ipx-packets between your machine and the rest
# of the world (in other words: their functionallity is essential). Of
# course, to use one of both is already sufficient.
#
# Note for people with other IPX/NCP servers on the net:
#       - choose the same frame-type as the other servers use
#       - make sure your network-number is not already in use by another
#         server (see the output of "slist" under Linux or DOS)
#
# Under Linux, it is possible to let the kernel creat all ipx-devices
# automatically for you. This is only possible (and only makes sense then)
# if there are other IPX/NCP servers on the same net which are setup
# correctly. It can be switched on in section '5'.
# -------------------------------------------------------------------------
# Syntax:
#       4       NET_NUMBER      DEVICE  FRAME   [TICKS]
#
# NET_NUMBER:   this number is determined by the router of the physical
#               network you're attached to. Use "0x0" to use the entry
#               for all network number match.
#
# DEVICE:       the network-interface associated with the NET_NUMBER. Use
#               a "*" (star) to use this entry for all devices match.
#
# FRAME:        the frame-type of the data-packets on your local network.
#               Possible values are:
#
#                 ethernet_ii :best for mixed(ipx, ip) environments
#                 802.2       :Novell uses this as default since 3.12
#                 802.3       :older frame typ, some boot proms use it
#                 snap        :normally not used
#                 token       :for token ring cards
#                 auto        :automatic detection of the frame-type used
#                              in your ipx-environment
#
# TICKS:        the time data-packets need to get delivered over a
#               certain interface. If your connection goes through several
#               routers, the shortest path can be determined by summing up
#               all ticks for every route and compare the results.
#               (1 tick = 1/18th second), default=1
#               Note: If ticks > 6 then the internal router handles
#               RIP/SAP specially. (RIP/SAP filtering)
#
# !! NOTE !!
# Automatic detection in this section means that ipx-interfaces which
# are created by other instances than the server/router,
# e.g. pppd, ipppd or ipx_interface, will be detected and inserted/removed
# in internal device/routing table at runtime.
#
# Automatic kernel creation of interfaces can be switched on in section 5.
# -------------------------------------------------------------------------
#
# Examples:
#       4   0x10    eth0    802.3   1 # setup ethernet with frame 802.3
#       4   0xa20   arc0    802.3   1 # standard arcnet (TRXNET)
#
#       4   0x0     *       AUTO    1 # auto detection of all ipx-interfaces.
#       4   0x0     eth0    AUTO    1 # auto detection of eth0 frames.
#       4   0x0     eth0    802.2   1 # auto detection of eth0 frame 802.2.
#
# Note: If ticks > 6 then the internal router handles RIP/SAP specially.
#       (RIP/SAP filtering)
#       4   0x0     isdn0   802.3   7 # auto isdn interface with ethernet encap.
#       4   0x0     ippp0   AUTO    7 # auto ippp0 (isdn ppp) interface.
#       4   0x0     ppp0    AUTO    7 # auto detection of ppp0 interface.


        4   0x22    eth0    ethernet_ii  1
        4   0x0     *       AUTO         1

# Section 5: special device flags
# =========================================================================
#     Flags
#      0x1   do not remove by nwserv/nwrouted added routes and ipx-devices
#            beyond the lifetime of the server or router.
#            If this flag is not set then all by nwserv/nwrouted added
#            ipx-devices/routes will be deleted when
#            nwserv/nwrouted ends and if no ipx socket is still
#            open. (default).
#
#      0x2   Switch on automatic kernel creation of ipx-interfaces.
#            The automatic kernel creating of ipx-devices sometimes
#            make trouble (Win95). It should only be used in the
#            beginning or for testing !!
#
#      0x4   do remove ALL routes and ipx-devices
#            beyond the lifetime of the server or router.
#            If this flag is set then all ipx-devices/routes
#            will be deleted when nwserv/nwrouted ends,
#            without looking for open ipx sockets.
#            This was the default prior mars_nwe 0.99.pl6 !
#            This also do complete ipx reinit when starting
#            mars_nwe.
#            This was the default prior mars_nwe 0.99.pl9 !
#
#
#
#     other flags may follow.
#     value will be interpreted as hex value.

5       0x0

# =========================================================================
# Section 6: version-"spoofing"
#
# Some clients work better if the server tells that it is a 3.11 Server,
# although many calls (namespace services) of a real 3.11 Server are
# missing yet.
# -------------------------------------------------------------------------
# Syntax:
#       6       SERVER_VERSION  [FLAGS]
#
# SERVER_VERSION: the version-number reported to DOS-clients
#       0       Version 2.15 (was default till version 0.98.pl7)
#       1       Version 3.11 (is default now)
#       2       Version 3.12
#
# If you want to use longfilenamesupport and/or namespace routines
# you should set this section to '1' or '2'
# And you should read doc/FAQS.
#
# FLAGS: some flags
#      &1       enable burst mode connections.
#               If you want to test Burst mode this flag must be set.
#               and in config.h you must set ENABLE_BURSTMODE to 1.
#
#     other flags may follow.
#     value will be interpreted as hex value.
# -------------------------------------------------------------------------
#
6       1   0x0


# =========================================================================
# Section 7: password handling of DOS-clients (required)
#
# When changing your "mars_nwe"-password from a DOS-client, this client
# (think of "LOGIN.EXE", "SYSCON.EXE" or "SETPASS.EXE") can encrypt your
# password before sending it to the "mars_nwe"-server (this improves
# security a little bit).
# In this section you can enforce encryption of user-passwords or allow
# not-encrypted sending of passwords over the net.
#
#
# On the Linux-side, passwords will only be stored in encrypted format.
#
#
# -------------------------------------------------------------------------
# Syntax:
#       7       Value
#
# Value:
#       0       enforce encryption of _all_ passwords by the DOS-client
#               (default)
#       1       as "0", but allow the non-encrypted version of the
#               "change password"-routine.
#       7       allow all non-encrypted stuff but no empty nwe passwords.
#       8       allow all non-encrypted stuff and also allow empty
#               nwe-passwords.
#       9       use all non-encryted calls + "get crypt key" will always fail
#               so the login program will use the old unencryted calls.
#               this will *not* work with all clients !! (OS2/client)
# -------------------------------------------------------------------------

7       0


# Section 8: special login/logout/security and other flags.
# =========================================================================
#     Flags
#      0x1   allow changing dir/accessing other files than login/*
#            when not logged in, if the client supports it.
#            ( this was standard till mars_nwe-0.98.pl4 )
#
#      0x2   switch on strange compatibility mode for opening files.
#            If an opencall do an open for writing but
#            the file is readonly then this call will not fail
#            but open the file readonly.
#
#      0x4   allow the rename file call (NCP function 0x45)
#            renaming of directories.
#            normally the rename file call returns an error if this
#            routine is used for renaming directories.
#
#      0x8   ignore station/time restrictions for supervisor.
#
#     0x10   allows deleting a file even if the file is opened by
#            other process.
#            ( this was standard before mars_nwe-0.99.pl0 )
#
#     0x20   store file base entries for later use.
#            Normally only directory base entries are stored.
#            necessary if using ncpfs as mars_nwe client.
#
#     0x40   limit's volume's free space info to 2 GB.
#            in some volume info calls.
#            some DOS clients need it.
#
#     0x80   allows renaming a file even if the file is opened by
#            other process.
#            ( this was standard before mars_nwe-0.99.pl18 )
#
#    0x100   not used yet.
#
#    0x200   needed for direct int17 printing on NETX clients
#            (patch from Przemyslaw Czerpak)
#
#     other flags may follow.
#     value will be interpreted as hex value.

8       0x0

# Section 9: Standard creat mode for creating directories and files.
# =========================================================================
#
# mkdir mode (creat mode directories), creat mode files
# values are always interpreted as octal values !
# if 0 is specified the standard umask will be used.
# if -1 is specified for directories the st_mode of parent directory
# will be used.
# Volumes depended values can be set in section 1.
# 9 -1 0640
#
9 0751  0640

# Section 10: UID and GID with minimal rights
# =========================================================================
#
# When loading the netware-drivers in the "autoexec.bat" of your
# DOS-client, you automatically "attach" to a netware-server.
# As a result, a new drive-letter is accessible under DOS, usally
# containing the programs "login.exe" and "slist.exe".
# Because you haven't logged in, nothing else of the netware-server
# will be visible to you. All actions requested from the DOS-client
# will be done with the following UID and GID on the Linux-side in this
# case.
# To achieve some level of security, the user/group asscociated with
# the UID and GID should only have _read_ rights on the files visible,
# _nothing_ else.
#
# On most Linux-systems, there is a user and group "nobody" defined in
# `/etc/passwd' and `/etc/group'. Use the number of that user/group
# for the following entries.
#
# -------------------------------------------------------------------------
# Syntax:
#       10      GID
#       11      UID
#
# GID   numeric number of the group
# UID   numeric number of the user
# -------------------------------------------------------------------------
#
# Example:
#       10      65534
#       11      65534

        10      65534
        11      65534


# =========================================================================
# Section 12: supervisor-login (required)
#
# The "supervisor" of a nw-server is much like "root" on the Linux-side.
#
# Specify a Linux-user that should be mapped to the supervisor of this
# mars_nwe-server.
# To improve security, don't use "root" for this purpose but create a
# seperate administrative account (under Linux) called "nw-adm" or similar.
#
# The nw-user defined in this section will have the mars_nwe internal UID
# "1" (remember even under Linux "root" must have the special UID "0"), so
# it is not possible to define a supervisor in section 13 (the users
# defined there will get random UIDs).
# You _can_ define a user with name "SUPERVISOR" in section 13, but he
# won't really be the "local god" on the "mars_nwe"-server.
# And of course you _can_ define a supervisor with name "GOD" or "ROOT"
# in _this_ section, which would only break the traditional naming-scheme
# of the netware-world.
#
#
# -------------------------------------------------------------------------
# Syntax:
#       12      NW_LOGIN        LINUX_LOGIN     [PASSWORD]
#
# NW_LOGIN:     the login-name for the "mars_nwe"-server (traditionally,
#               this is "SUPERVISOR")
# LINUX_LOGIN:  the account on the Linux-side associated with the NW_LOGIN
# PASSWORD:     the password for the NW_LOGIN. It must be clear-text but
#               will be encrypted and permanent stored in the
#               bindery-files, so it (the password or the whole section, at
#               your option) can be deleted after the first start of
#               "nwserv".
#
#               Make sure this file is not world-readable as long
#               as the password stands here.
#
#               If you leave this field blank when starting "mars_nwe" the
#               first time, the supervisor-login will be completely
#               disabled. In other words: there is no way to supply the
#               supervisor with no password ("null-password").
# -------------------------------------------------------------------------
#
# Example:
#       12      SUPERVISOR      nw-adm          top-secret

12  SUPERVISOR   root


# =========================================================================
# Section 13: user-logins (optional)
#
# You can provide mappings from the regular login-names of your Linux-Box
# to "mars_nwe"-logins here.
# Every "mars_nwe"-user _must_ have a login-name on the Linux side (even
# if he can't log in into the account associated with the login-name,
# because you locked it with a "*") in order to "own" files.
# If you specify a Linux-login that doesn't exist (one could think of a
# typo), the user will only have the minimal rights defined in
# sections 10/11.
#
# You may also map different mars_nwe user to the same unix user.
#
# See section 12 for a description of the syntax.
#
# Unlike in section 12, you can define users with no password.
# If you explizit want to set 'no password' here then use
# a '-' sign as password.
# -------------------------------------------------------------------------
# Syntax:
#       13  NW_LOGIN  [LINUX_LOGIN] [PASSWORD]  [FLAGS]
#
# FLAGS must be a hex value begin with 0x
# the only FLAG value in the moment is 0x1 for 'fixed passwords'
# which cannot be changed by user.
# Example:
#       13  MARTIN
#       13  MARTIN    martin
#       13  DAREK     martin
#       13  COMMON    common        gast    0x1  # no password change by user.
#       13  COMMON    common                0x1  # syntax is allowed too.

13	GUEST	nobody	-	0x1

# Section 14: currently not used

# =========================================================================
# Section 15: automatic mapping of logins (decision required)
#
# If you have a large number of accounts on your Linux-machine, you may
# want to map all Linux-logins automatically to "mars_nwe"-logins.
#
# At this stage this section is only a quick hack to make life a bit
# easier for the administrator.
#
# WARNING: as there is no algorithm to convert the encrypted
# "Linux-passwords" into the encrypted format used by the DOS-clients (and
# therefore "mars_nwe"), you have to supply a common password for all
# automatically mapped users. This is a big security concern and you
# should never make this common password public (and, of course you
# should choose a sufficient "secure" (read: difficult) password).
# Type the common password to grant access to the users login and the
# command "setpass" instead of telling the password to the user.
#
# Only those Linux-logins will handled automatically that don't have a
# "x" or "*" as their encrypted password.
#
#
# -------------------------------------------------------------------------
# Syntax:
#       15      FLAG    DEFAULT_PASSWORD
#
# FLAG:
#       0       DON'T map the Linux-logins automatically to
#               "mars_nwe"-logins (default)
#       1       YES, DO the automatic mapping and provide every login
#               created this way with the common password given with
#               "DEFAULT_PASSWORD"
#       99      re-read the logins from /etc/passwd and overwrite even the
#               already existing logins from the bindery (this will also
#               reset all the passwords to "DEFAULT_PASSWORD")
#
# DEFAULT_PASSWORD: the common password for all automatically created
#               logins (only needed if FLAG is not "0"); everything about
#               password in section 12 applies to this.
# -------------------------------------------------------------------------

15   0     top-secret


# =========================================================================
# Section 16: Tests on startup
#
# If you want some sanity checks at startup, set this flag to > 0.
# "mars_nwe" will try to create/change missing directories:
#  SYS:LOGIN, SYS:MAIL, SYS:MAIL/XXX, SYS:PUBLIC, SYS:SYSTEM ...
# (with the "right" permissions, of course) if you enable this.
# should also be enabled when you use a new mars_nwe version.
# Disabling this test only spares little time when starting mars_nwe.
# some values:
#   1  few important tests.
#   2  also check/compress bindery.

16      1


# Section 17: some bindery / user related flags.
# =========================================================================
#     Flags
#      0x1   give all user an empty! login script, if they do not
#            already have one. Is interpreted by test routines
#            which run if section 16 is set and nwserv starts
#            or got a SIGHUP. ( nwserv -h )
#
#     other flags may follow.
#     value will be interpreted as hex value.

17       0x0

# Section 18: some queue handling related flags.
# =========================================================================
#     Flags
#      0x1  always unset (disable) the print banner flag.
#
#     other flags may follow.
#     value will be interpreted as hex value.
18       0x0

# Section 19-20: currently not used


# =========================================================================
# Section 21: print queues (optional)
#
# Which of the printers connected to your Linux-box should be accessible
# from the DOS-clients?
# Multiple entries are allowed.
#
# -------------------------------------------------------------------------
# Syntax:
#       21      QUEUE_NAME      [QUEUE_DIR]       [PRINT_COMMAND]
#
# QUEUE_NAME:   the name of the print queue on client-side (to make it
#               perfectly clear: _not_ the Linux-queue)
# QUEUE_DIR:    spooling directory for the print-jobs.
#               The name is the DOS (not Unix) name of this
#               directory.
#               It must be placed on the first defined volume.
#               (standard name is SYS volume).
#               Then it will be created at starttime of mars_nwe.
#               It must exist before printing.
#               (_not_ the spooling-directories of the Linux-lpd)
#               NOTE !
#               A '-' sign as QUEUE_DIR has special meaning of
#               'standard' queuedir name.  ( SYS:\SYSTEM\queueid.QDR )
#
# PRINT_COMMAND: command used for serving the print-jobs under Linux
#               (see "man lpr" and "man magicfilter" for details)
#               if the '!' is last parameter of command then
#               the queue-packet fields 'banner_user_name'
#               and 'banner_file_name' will be added to the
#               command as last parameters.
#               NOTE !
#               If a print command is not specified the job can/must be
#               printed by any print server.
#               (e.g. pserver (ncpfs utils) or external printserver)
#
# Examples:
#       21      LASER           -    lpr -Plaser
#       21      OCTOPUSS
#       21      FAXPRINT  -  /usr/bin/psfaxprn /var/spool/fax/faxqueue
# -------------------------------------------------------------------------
21	LP	-	lpr -
#21	LP_PS



# =========================================================================
# Section 22: print server entries (optional)
# adds printserver entries into bindery
# e.g. to enable printing with ncpfs pserver
# -------------------------------------------------------------------------
# Syntax:
#       22	PSERVER_NAME  QUEUE_NAME  [FLAGS]
#
# FLAGS:
#        1      Let PSERVER_NAME be a 'normal' user (type 1).
#               Used for simple qserver which works under 'normal' user login.
#
# Examples:
#       22	PS1	OCTOPUSS

#22	PS_NWE	LP_PS	1


# =========================================================================
# Section 30: Burst mode values (optional)
#
# -------------------------------------------------------------------------
# Syntax:
#       30     MAX_BURST_READ_BUF  MAX_BURST_WRITE_BUF
# default is    0x2000 0x2000
# Examples:
#       30      0x2000    0x2000


# =========================================================================
# Section 31: not used yet
# =========================================================================
#     Flags  not used yet
#
        31     0x0

# =========================================================================
# Section 40ff: Some pathes (optional)
#
# -------------------------------------------------------------------------
#  40 = path for vol/dev/inode->path cache, needed for client-32,namespace
40  /var/spool/nwserv/.volcache
#  41 = path for share/lock files
41  /var/spool/nwserv/.locks
#  42 = path for spool dir, e.g. internal print queue handling
42  /var/spool/nwserv
#
#
#  45 = path for bindery file's
45  /var/nwserv/db
#  46 = path for attribute handling
46  /var/nwserv/attrib
#  47 = path for trustee handling
47  /var/nwserv/trustees
# =========================================================================
# Section 50: Conversion tables by Victor Khimenko <khim@mccme.ru>
# Tables for DOS->Unix names translation & upper/lowercase translations
# For more information see doc/README.NLS
# some examples files exist in the examples directory.
# Conversation file must include 4 tables a 256 byte.
#  0 = dos2unix
#  1 = unix2dos
#  2 = down2up 'dosname'
#  3 = up2down 'dosname'
# -------------------------------------------------------------------------
# Syntax:
#       50     Filename of conversation file.
#
# Examples:
#       50     /etc/nwserv.cnv


# Changing defaults from config.h
# more information in config.h
# 60  10          # MAX_CONNECTIONS
# 61  10          # MAX_NW_VOLS
# 63  50          # MAX_DIR_BASE_ENTRIES

# 68  1           # USE_MMAP  (use mmap=1, no mmap=0)
# 69  1           # HANDLE_ALL_SAP_TYPS (all sap typs=1, only typ 4=0)

# 70  0x44444444  # NETWORK_SERIAL_NMBR (4 byte)
# 71  0x2222      # NETWORK_APPL_NMBR   (2 byte)


# --------------------------------------------------------
# You usally don't want to change anything below this line
# --------------------------------------------------------

# Sections 80-99: some more constants
# 80  50          # max_dir_search_handles (namspace.c)

# Sections 100-106: amount of debug-information
#
# FLAG:
#       0       no debug messages
#       1       errors and notes are reported
#       99      maximum debug levels

100     0               # debug IPX KERNEL (0 | 1)
101     1               # debug NWSERV
102     1               # debug NCPSERV
103     1               # debug NWCONN
104     0               # debug (start) NWCLIENT, should *always* be '0' !
105     1               # debug NWBIND
106     1               # debug NWROUTED

# Sections 200-202: logging of "nwserv"
#
200     1               # 0 = no logfile and dont daemonize nwserv/nwrouted
                        # 1 = daemonize nwserv/nwrouted and use logfile
201     /var/log/nw.log # filename of logfile
#201     syslog          # if filename == syslog then syslogd will be used for
                        # all messages

202     0x1             # flag in hex notation
                        #   0x0=append all messages to logfile.
                        # & 0x1=creat new logfile instead of appending.
#202    0x3             # & 0x2=use syslogd for error messages instead of logfile.




# Sections 210,211: timing

210     10              # 1 .. 600  (default 10) seconds after server
                        # really goes down after a down command
211     60              # 10 .. 600 (default 60) broadcasts every x seconds


# Sections 300-302: loging of routing-information

300     1               # > 0 print routing info to file every x broadcasts.
                        # ( normally minutes )
301     /var/log/nw.routes #  filename of logfile

302     0x1             # flags will be interpreted as hex value.
                        #     0 = append to this file
                        # & 0x1 = creat new routing info file
                        # & 0x2 = split info into several files
                        #         (extensions = .1, .2, .3 ... )

# Section 310: watchdogs

310     7               # send wdog's only to device net < x ticks.
                        # 0 = always send wdogs. < 0 = never send wdogs

# Section 400:
# station file for special handling of stations.

400  /etc/nwserv.stations  # for syntax see file in the examples directory.


# Section 401: nearest server
#
# for special handling of the 'get nearest server request'.
401     0       # 0 = ignore entry 400, get nearest response always enabled.
                # 1 = 400 are excludes, get nearest response normally enabled.
                # 2 = 400 are includes, get nearest response normally disabled.

# Section 402: station connect restrictions
#
# for special handling of the 'creat connection' (attach) call.
402     0       # 0 = ignore entry 400, create connection always enabled.
                # 1 = 400 are excludes, create connection normally enabled.
                # 2 = 400 are includes, create connection normally disabled.