mars-nwe/examples/nw.ini.old

#
# This is the configuration-file for "mars_nwe", the free netware-emulator
# for Linux.
#
# last change: 13-May-96
#
# Syntax of this config-file:
#      - everything after the "#" is ignored, so it is used to
#        make comment-lines
#      - entries _must_ begin with a number, indicating the section
#        they belong to
#      - hexadecimal values are prepended with "0x"
#
# All examples are verbatim.


# Section 1: volumes (required)
#
# In this section you list all directories accessible via "mars_nwe".
# To be more specific: a mapping from Linux-directories to mars_nwe-volumes
# is done. (Volumes are the beasts you can map to drive letters under DOS
# using "map.exe").
#
# Linux-directory              mars_nwe-volume    map.exe      DOS-Drive
# /var/local/nwe/SYS  ------->  SYS            ------------->  W:
#
# More than one entry is possible in this section.
# The maximum number of volumes is a compile-time option that must be
# specified in `config.h' before compiling mars_nwe.
#
# Please note that at least the volume "SYS" must be defined and it must
# contain the following sub-directories: LOGIN, PUBLIC, SYSTEM, MAIL.
# See the installation-instructions in the doc-directory for more infos.
#
# Syntax:
#      1       VOLUMENAME      DIRECTORY               OPTIONS
#
# VOLUMENAME:  the name of the mars_nwe-volume (max. 8 characters)
# DIRECTORY:   the directory on your Linux-system associated with that
#              volume; use the special name "~" to refer to the users
#              individual home-directory
#
# OPTIONS:     none or some of the following characters (without a seperator)
#      k       allow lowercase-filenames (if you don't set this, all
#              files _must_ be upper-case)
#      m       removable volume (e.g. cd-roms)
#      o       volume has only one filesystem/device/namespace
#              this is for filesystems with high inode > 0xFFFFFFF.
#              because for namespace services mars_nwe normally use the
#              first 4 bit of 32 bit inode to distinguish
#              between several devices/namespaces for one volume.
#      p       "PIPE"-filesystem. All files are pipe commands.
#              See `doc/PIPE-FS'.
#      r       readonly volume. Free disk space will also return 0.
#
# examples:
1 SYS         /u3/SYS/           # SYS upper-case filenames
1 CDROM       /cdrom         km  # lowercase filenames, removable
1 HOME        ~              k   # users HOME directory, lowercase


# Section 2: servername (optional)
#
# The servername is the name under which this server will show up when
# using tools like "slist" (server-list).
#
# If you don't supply an entry for this section, the hostname of your
# Linux-machine will be converted to all-uppercase and used as the servername.
#
# Syntax:
#      2       SERVERNAME
#
# SERVERNAME:  a name for this nw-server
#
# Example:
#      2       MARS


# Section 3: Number of the internal network
# If you have mars_nwe V > 0.96pl5 and a kernel >= 1.3.60
# or the small ipx-kpatch from the examples dir you should use
# internal net and routing.
#
# NOTE: the internal net number must be _unique_ in your IPX-environment!
#
# Syntax:
#      3       INTERNAL_NET    [NODE]
#
# INTERNAL_NET:        AUTO  or 0 for using the ip number as INTERNAL_NET
#
# NODE:                1 (optional)
#
# Examples:
# 3       0xABCDEF99          # use a unique number
3   AUTO                      # use ip number as INTERNAL_NET


# Section 4: IPX-devices (optional)
#
# NOTE for people with other IPX/NCP servers on the net:
# Your network numbers, frames must be the same as at your
# other servers on the same net.
#
# Syntax:
#      4       NET_NUMBER      DEVICE  FRAME   TICKS
#
# NET_NUMBER:
# DEVICE:      the network-interface associated with the NET_NUMBER
# FRAME:
#      ethernet_ii
#      802.2
#      802.3   (default)
#      snap
#      token
#      auto
# TICKS:       ethernet: 1, isdn: 7
#
# Examples:
4       0x10    eth0    802.3   1
# Automatic setup:
4       0x0     *       AUTO    1
#
# NOTE: autosetup only works if there are other IXP/NCP servers on
# the same net which are setup correctly, that means: tells us the required
# information about netnumber and frame.


# Section 5: Saving of ipx-routes (optional)
#
# This entry controls if the information regarding the ipx-routes should be
# saved beyond the livetime of the server.
# You can achieve a small speedup when starting mars_nwe by using this entry.
#
# Syntax:
#      5       SAVE_FLAG
#
# SAVE_FLAG:
#      0       don't save routes (default)
#      1       do save routes
# Example:
5      0


# Section 6: version-spoofing
#
# Some clients work better if the server tells that it is a 3.11 Server,
# although many calls (namespace services) of a real 3.11 Server are
# missing yet.
# To test the namespace calls, this entry must be set to > 0 and `config.h'
# must be altered before compiling "mars_nwe".
#
# Syntax:
#      6       SERVER_VERSION
#
# SERVER_VERSION:
#      0       Version 2.15
#      1       Version 3.11
#      2       Version 3.12 (not implemented yet)
6      0


# Section 7: password handling (required)
# When changing your "mars_nwe"-password from a DOS-client, this client
# (think of "LOGIN.EXE", "SYSCON.EXE" or "SETPASS.EXE") can encrypt your
# password before sending it to the "mars_nwe"-server (this improves
# security a little bit).
# In this section you can enforce encryption of user-passwords or allow
# not-encrypted sending of passwords over the net.
# On the Linux-side, passwords will only be stored in encrypted format.
#
# Syntax:
#      7       FLAG
#
# FLAG:
#      0       use only encrypted passwords stuff.
#              the encrypted change password call is not
#              implemented till now, so if you choose this option
#              you will not be able to change passwords from
#              client size.
#      1       allow the unencrypted change password routine (default).
#              You can use mars_dosutils or an old 2.15 setpass program.
#
#      7       allow all unencrypted stuff, no empty nwe passwords.
#      8       allow all unencrypted stuff, allow empty nwe passwords.
#      9       use all unencryted calls + get crypt key will allways fail
#              so the login program will use the old unencryted calls.
#              this will *not* work with all clients !! (OS2/client)
7      1


# Section 10 + 11 : UID and GID with minimal rights
#
# When loading the netware-drivers in the "autoexec.bat" of your
# DOS-client, you automatically "attach" to a netware-server.
# As a result, a new drive-letter is accessible under DOS, usally
# containing the programs "login.exe" and "slist.exe".
# Because you haven't logged in, nothing else of the netware-server
# will be visible to you. All actions requested from the DOS-client
# will be done with the following UID and GID on the Linux-side in this
# case.
# To achieve some level of security, the user/group asscociated with
# the UID and GID should only have _read_ rights on the files visible,
# _nothing_ else.
#
# On most Linux-systems, there is a user and group "nobody" defined in
# `/etc/passwd' and `/etc/group'. Use the number of that user/group
# for the following entries.
#
# Syntax:
#      10      GID
#      11      UID
# Example:
#      10      65534
#      11      65534
#
# GID  numeric number of the group
# UID  numeric number of the user
10     65534
11     65534


# Section 12: supervisor-login (required)
#
# The "supervisor" of a nw-server is much like "root" on the Linux-side.
#
# Syntax:
#      12      NW_LOGIN        LINUX_LOGIN     [PASSWORD]
#
# NW_LOGIN:    the login-name for the "mars_nwe"-server (traditionally,
#              this is "SUPERVISOR")
# LINUX_LOGIN: the account on the Linux-side associated with the NW_LOGIN
#              (to improve security, don't use "root" here)
# PASSWORD:    the password for the NW_LOGIN. It must be clear-text but
#              will be encrypted and permanent stored in the
#              bindery-files, so it can be deleted after the first start
#              of "nwserv".
#
# Example:
12  SUPERVISOR   root       top-secret


# Section 13: user-logins (optional)
#
# See section 12 for the syntax.
#
# Examples:
13  MAR          mar    mypw
13  ALF          mar     -      # no password


# Section 15: read unix users automaticly from passwd into bindery
#
# Syntax:
#      15      FLAG    DEFAULT_PASSWORD
#
# FLAG:
#      0       off
#      1       on
#      99      overwrite existing users.
#
# DEFAULT_PASSWORD: password for every new inserted user.
#
15   0     top-secret
#
# !!! IMPORTANT !!!
# If you enable this feature you should chose a secure
# password for the users, because all not existent
# mars_nwe users will be inserted into bindery with this password.


# Section 16: Tests on startup
#
16   1  # enable some bindery and sys dir tests/creats after starting.
#         default = 1


# Section 21: print queues (optional)
#
# Make the printers connected to your Linux-box accessible from the
# DOS-clients.
# Multiple entries are allowed.
#
# Syntax:
#      21      QUEUE_NAME      QUEUE_DIR       PRINT_COMMAND
#
# QUEUE_NAME:  the name of the print queue
# QUEUE_DIR:   spooling directory for the print-jobs; this directory must
#              exist before printing
# PRINT_COMMAND: command used for serving the print-jobs under Linux
#              (see "man lpr" and "man magicfilter" for details)
#
# Examples:
#      21      LASER           SYS:/PRINT/L    lpr -Plaser
#      21      OCTOPUSS        SYS:/PRINT/O    lpr -Php_deskjet


# --------------------------------------------------------
# You usally don't want to change anything below this line
# --------------------------------------------------------

# Sections 100-106: amount of debug-information
#
# FLAG:
#      0       no debug messages
#      1       errors and notes are reported
#      ..
#      99      maximum debug level
100  0   # debug IPX KERNEL (0 | 1)
101  1   # debug NWSERV
102  0   # debug NCPSERV
103  0   # debug NWCONN
104  0   # debug (start) NWCLIENT
105  0   # debug NWBIND
106  1   # debug NWROUTED


# Sections 200-202: logging of "nwserv"
#
200  1   # 0 = no logfile and dont daemonize nwserv/nwrouted
#        # 1 = daemonize nwserv/nwrouted and use logfile
201    /tmp/nw.log  # filename of logfile
202  1              # 1=creat new logfile, 0=append to logfile


# Sections 210,211: timing
#
210    10              # 1 .. 600  (default 10) seconds after server
#                      # really goes down after a down command
211  60  # 10 .. 600 (default 60) broadcasts every x seconds


# Sections 300-302: loging of routing-information
#
300    1               # > 0 print routing info to file every x broadcasts.
#                      # ( normally minutes )
301    /tmp/nw.routes  # filename of logfile
302    1               # 1 = creat new routing info file
#                      # 0 = append to this file


# Section 310: watchdogs
#
310  7  # send wdog's only to device net < x ticks.
#         0 = allways send wdogs. < 0 = never send wdogs
#
# Section 400:
# station file for special handling of stations.
#
400  /etc/nwserv.stations  # for syntax see file in the examples directory.


# Section 401: nearest server
#
# for special handling of the 'get nearest server request'.
401  0  # 0 = ignore entry 400, get nearest response ever enabled.
#         1 = 400 are excludes, get nearest response normally enabled.
#         2 = 400 are includes, get nearest response normally disabled.