mars-nwe/doc/FAQS

77 lines
3.3 KiB
Plaintext
Raw Normal View History

2011-11-13 00:38:58 +01:00
last updated: 11-Apr-97
2011-11-13 00:38:56 +01:00
Q: I don't exaclty understand the meaning of some ponits in nw.ini:
12,13
What will happen if I will not put PASSWORD here? Will it take it from
/etc/passwd? I want it to be so.
A: This passwords will be stored (crypted) into bindery to can handle
the crypted login call from a standarrd Novell client.
Q: What role plays: 15?
What if I will no supply passwd here?
A: This is for automatic inserting UNIX Users as mars_nwe users.
All of these automatic inserted users will get the password
as the crypted bindery password.
2011-11-13 00:38:57 +01:00
Q: File write will not work under WIN3.1, WfW
A: Try updating C:\WINDOWS\SYSTEM\STORAGE.DLL. I find that earlier
versions of this file evince the problem you describe under Windows 3.1
and 3.11. Precisely when this problem went away in STORAGE.DLL I don't
know, but versions dated October 1994 or later are working for us.
( John Rigby )
Q: I do not have longfilenamesupport.
A: Give the volume the 'O' flag.
Set section 6 in nwserv.conf to > 0.
Win95, by default, does not use long filenames on a netware 3.11
server. This is documented in the resource kit help file and
elsewhere. You should read that to find out the ramifications, but
with real netware I've had good luck using the recommended registry
settings. Here is a registry import file:
REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\NWREDIR]
"SupportLFN"=hex:02
2011-11-13 00:38:58 +01:00
Q: I have 2 Eth-devices (one for IP/IPX and one for IPX only)
and after starting mars_nwe I have strange problems with my IP-net.
A: Make sure that all Eth-devices have an assigned IP-address, even
they are only used for IPX.
Q: I have arcnet cards and I dont find the frame-typ TRXNET.
A: The correct frame typ is handled by the arcnet driver.
You should use the 'dummy frametyp' 802.3.
2011-11-13 00:38:58 +01:00
Q: The CONFIG_IPX_INTERN kernel option is *not* set but
when I start 'nwserv' as root it sais:
!! NWSERV 0:PANIC !!
NWSERV 0:!! configuration error !!:
mars_nwe don't run with kernel 'full internal net'.
Change kernel option CONFIG_IPX_INTERN=NO (nobody needs it)
or use 'ipxd' and change mars_nwe INTERNAL_RIP_SAP=0.
A: Sorry but mars_nwe can recognize this setting only at compile time,
so you must compile mars_nwe again with actual kernel CONFIG_IPX_INTERN=NO
settings.
2011-11-13 00:38:58 +01:00
2011-11-13 00:38:58 +01:00
Q: What is an easy way to get a 'clean' nwserv.conf file without comments.
A: do a 'make showconf' in the mars_nwserv directory or do a
'grep "^[ \t]*[0-9]" /etc/nwserv.conf'
Q: Which frametyp should I use (Ethernet_ii, 802.2, SNAP or 802.3) ?
A: Use Ethernet_II on a new network as it can carry anything and everything
(AFAIK) and doesn't have any of the potential disadvantages of the rest.
If you're trying to fit into an already established environment which
doesn't use Ethernet II for IPX/SPX traffic then try using 802.2 if
available. Netware v4 upwards uses this by default. Apparently OSI uses
this as well.
I'll gloss over SNAP at this point, as I only know of it being used
in Appletalk environments which I've never dealt with. I did just notice
a comment in the Linux source tree about not using it for IP and IPX yet(?).
Last, and pretty much least, comes 802.3 which is only used by IPX/SPX,
and for less and less of that these days, but it shouldn't break anything
if you have to use it.
(Rick)
2011-11-13 00:38:58 +01:00