Bump

Upstream version 5.10.44.0

amd64/opt/smartstorageadmin/ssaducli/README.TXT

@@ -1,17 +1,17 @@
-Smart Storage Administrator Diagnostics and SmartSSD Wear Gauge Utility CLI
+Smart Storage Administrator Diagnostics and SSD Wear Gauge Utility CLI
-Version 3.30-14.0
+Version 5.10-44.0 (linuxX64)
-4/24/2018
+1/20/2021
 
 Description
 -----------
-  Smart Storage Administrator Diagnostics and SmartSSD Wear Gauge Utility CLI
+  The Smart Storage Administrator Diagnostics and SSD Wear Gauge
-  (SSADUCLI) is a command line application that creates a report of all HPE
+  Utility CLI (SSADUCLI) is a command line application that creates a
-  Storage controllers and disk drives. This report provides vital information to
+  report of all storage controllers and disk drives. This report
-  HPE service personnel to assist in identifying faults or conditions that may
+  provides vital information to service personnel to assist in
-  require attention.
+  identifying faults or conditions that may require attention.
 
-  The utility can also generate SmartSSD Wear Gauge reports.  These
+  The utility can also generate SSD Wear Gauge reports.  These
-  reports contain wear (usage) information for all SmartSSD devices
+  reports contain wear (usage) information for all SSD devices
   attached to the system.
 
 * All other product names mentioned herein may be trademarks of their 
@@ -43,7 +43,10 @@ Linux 64-bit components:
 
 * Any platform that requires the CCISS driver should use version 3.6.28 or newer.
 
-These drivers are available from http://support.hpe.com.
+  These drivers are available from:
+     http://support.hpe.com
+     or 
+     http://www.microsemi.com
 
 Supported Controllers
 ---------------------
@@ -93,32 +96,47 @@ Supported Controllers
   Smart Array P840ar Controller
   Smart Array P841 Controller
 
+  Adaptec SmartHBA-SA
+  Adaptec SmartHBA-SA 8i
+  Adaptec SmartHBA-SA 8i8e
+  Adaptec SmartHBA-SA 8e
+  Adaptec SmartHBA-SA 16i
+  Adaptec SmartHBA-SA 4i4e
+
+  Microsemi Adaptec HBA 1000-16i
+  Microsemi Adaptec HBA 1000-16e
+  Microsemi Adaptec HBA 1000-8i8e
+  Microsemi Adaptec HBA 1000-8i
+  Microsemi Adaptec HBA 1000-8e
+
 Installing and running Smart Storage Administrator
 --------------------------------------------------------------
   Installation:
-    SSADUCLI is distributed using Red Hat Package Manager (RPM) packages.
+    SSADUCLI is distributed using Red Hat Package Manager (RPM) packages and
-    If there is an older version of SSADUCLI installed on the system, please
+    .deb packages for Debian. 
-       use "rpm -e ssaducli" to remove it first. Use "rpm -i <file name>" to
+    If there is an older version of SSACLI installed on the system, please
+       use "rpm -e ssacli" to remove it first. Use "rpm -i <file name>" to
        install the application.
     Please type "man rpm" for other details regarding RPM.
-    The software resides in /opt/smartstorageadmin/ssaducli and the executable
+    NOTE: On Debian systems, a ".deb" package file can be installed using the
-    name is ssaducli which is located in /usr/sbin.
+    "dpkg -i ssacli.xxx.deb" command.  The dpkg -r ssacli command
+    is used to remove the package.
+    The software resides in /opt/smartstorageadmin/ssacli and the executable 
+    name is ssacli which is located in /usr/sbin.
 
-    When attempting to run SSADUCLI on any HPE-supported version of Linux, it is
+  For Debian 64 bit:
-    highly recommended that you install the latest version of the HPE ProLiant
+     dpkg -i --force-architecture <file name>. ssacli requires the libunwind
-    Smart Array controller driver for your intended Linux operating system.
+     bit package to be installed.
-    Drivers may be obtained by clicking on "HPE Servers, Storage and Networking"
-    from HPE's support website at: http://support.hpe.com
 
-  To run the command-line application:
+
+  Running SSADUCLI:
    Open a command prompt and change directory (cd) to the location
-      where SSADUCLI is installed.  This is commonly
+      where SSADUCLI is installed.  This is commonly /opt/smartstorageadmin/ssaducli/bin. 
-      /opt/smartstorageadmin/ssaducli/bin.
    To generate a diagnostic report, enter the following command:
 
        ssaducli -f adu-report.zip
 
-   To generate a SmartSSD Wear gauge report, enter the following command:
+   To generate a SSD Wear gauge report, enter the following command:
 
        ssaducli -ssd -f ssd-report.zip
 
@@ -126,7 +144,7 @@ Installing and running Smart Storage Administrator
 
 Additional Notes
 ----------------
-Both the diagnostic and SmartSSD wear gauge reports are generated in compressed
+Both the diagnostic and SSD wear gauge reports are generated in compressed
   (ZIP) format.
 
 The diagnostic report output archive contains the following files:
@@ -137,24 +155,21 @@ The diagnostic report output archive contains the following files:
    * report.checksum        => checksum file
    * SlotX.txt (SlotX.old)  => Controller serial output log
 
-   Note: The serial output log file(s) are only available if the "HPE Storage
-         Agent" daemon is installed and running.
-
    To view the diagnostic report in a browser, extract the ADUReport.htm. Open
       ADUReport.htm in the browser.
 
-The SmartSSD wear gauge report output archive contains the following files:
+The SSD wear gauge report output archive contains the following files:
 
-   * SmartSSDWearGaugeReport.txt => SmartSSD wear gauge report in text format
+   * SmartSSDWearGaugeReport.txt => SSD wear gauge report in text format
-   * SmartSSDWearGaugeReport.js  => SmartSSD wear gauge report in JSON format
+   * SmartSSDWearGaugeReport.js  => SSD wear gauge report in JSON format
    * SmartSSDWearGaugeReport.htm => HTML viewer for the JSON wear gauge report
 
-   To view the SmartSSD wear gauge report in a browser, extract the
+   To view the SSD wear gauge report in a browser, extract the
    SmartSSDWearGaugeReport.js, SmartSSDWearGaugeReport.htm files to a
    directory (both files must reside in the same directory).  Open
    SmartSSDWearGaugeReport.htm in the browser.
 
 Support
 -------
-For support for SSADUCLI and Smart Array controllers, please visit
+For support for SSADUCLI and Microsemi/Adaptec RAID controllers and
-http://support.hpe.com
+HBAs, please visit http://www.microsemi.com.

amd64/opt/smartstorageadmin/ssaducli/ssadu.license

@@ -1,338 +1,141 @@
+PMC-Sierra, Inc. Software License Agreement
 
+CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS.  BY YOUR USE OF THE SOFTWARE
+INCLUDED WITH THIS PRODUCT, YOU AGREE TO BE BOUND BY THESE TERMS, CONDITIONS, 
+AND REQUIREMENTS. IF YOU DO NOT AGREE TO THE LICENSE TERMS, CONDITIONS, AND 
+REQUIREMENTS APPLICABLE TO THE SOFTWARE, YOU ARE NOT PERMITTED TO USE THE 
+SOFTWARE AND MAY RETURN THE ENTIRE UNUSED HARDWARE PRODUCT FOR A FULL REFUND.
+HOWEVER, THESE TERMS, CONDITIONS, AND REQUIREMENTS DO NOT APPLY TO ANY OPEN
+SOURCE SOFTWARE, WHICH MAY BE DELIVERED TOGETHER WITH THE PMC-SIERRA PRODUCTS,
+EXCEPT FOR THE PROVISIONS SET FORTH IN SECTION 7 AND 9 BELOW.
 
-		PROLIANT ESSENTIALS SOFTWARE
+In return for acquiring a license to use the PMC-Sierra software ("Software")
+and the related documentation, you agree to the following terms and conditions:
 
-		END USER LICENSE AGREEMENT
+1. License. This Agreement grants You, the Licensee, a license to:
+   Use the Software on a single computer system or on multiple workstations,
+   systems and servers which incorporate an PMC-Sierra Hardware product and may
+   be accessed by multiple users from multiple locations.  You may make as many
+   installations of the Software as needed, but must restrict such installation
+   only to systems, workstations or servers using an PMC-Sierra hardware
+   product.
 
-PLEASE READ THIS END USER LICENSE AGREEMENT ("AGREEMENT") CAREFULLY.  THIS
+   Make one copy of the Software in machine readable form solely for back-up
-AGREEMENT IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR SINGLE
+   purposes provided you reproduce PMC-Sierra’s copyright notice and any
-ENTITY) ("YOU") AND HEWLETT-PACKARD COMPANY ("HP").  BY CLICKING THE "AGREE"
+   proprietary legends.
-BUTTON BELOW, COPYING, INSTALLING, OR OTHERWISE USING THE SOFTWARE,
-(i) YOU DO SO WITH THE INTENT TO ELECTRONICALLY "EXECUTE" THIS AGREEMENT, AND
-(ii) YOU AGREE TO BE BOUND BY AND COMPLY WITH THE FOLLOWING TERMS AND
-CONDITIONS, INCLUDING THE WARRANTY STATEMENT, AS WELL AS ANY TERMS AND
-CONDITIONS CONTAINED IN THE "ANCILLARY SOFTWARE" LIST.
 
-IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT,
+2. Restrictions. You may not distribute copies of the Software to others.  You
-(A) IF THIS AGREEMENT IS DISPLAYED ELECTRONICALLY, YOU MAY INDICATE REJECTION
+   may not post or otherwise make available the Software, or any portion
-    OF THIS AGREEMENT BY CLICKING THE "DISAGREE" BUTTON;
+   thereof, in any form, on the Internet. You may not use the software in a
-(B) YOU SHALL NOT INSTALL THE SOFTWARE; AND
+   computer service business, including in time sharing applications.  The
-(C) HP DOES NOT GRANT YOU ANY RIGHTS TO USE THE SOFTWARE.
+   Software contains trade secrets and in order to protect them you may not
-NOTWITHSTANDING THE FOREGOING, INSTALLING OR OTHERWISE USING THE SOFTWARE
+   decompile, reverse engineer, disassemble, or otherwise reduce the Software
-INDICATES YOUR ACCEPTANCE OF THE TERMS AND CONDITIONS OF THIS AGREEMENT.
+   to a human perceivable form.  YOU MAY NOT MODIFY, ADAPT, TRANSLATE, RENT,
-IF YOU PURCHASED THE SOFTWARE, YOU MAY RETURN THE SOFTWARE TO THE PLACE OF
+   LEASE, LOAN, RESELL FOR PROFIT, DISTRIBUTE OR CREATE DERIVATIVE WORKS BASED
-PURCHASE FOR A FULL REFUND.
+   UPON THE SOFTWARE OR ANY PART THEREOF.
 
-THE SOFTWARE PROVIDED HEREIN, IS PROVIDED BY HP AND BY THIRD PARTIES, INCLUDING
+3. Ownership. As Licensee, You own the media upon which the Software is
-THE OPEN SOURCE COMMUNITY ("ANCILLARY SOFTWARE").  USE OF THE HP SOFTWARE, THE
+   recorded or fixed, but PMC-Sierra and its licensors retain title, ownership
-ANCILLARY SOFTWARE, ACCOMPANYING PRINTED MATERIALS, AND THE "ONLINE" OR
+   and intellectual property rights of the Software recorded on the original
-ELECTRONIC DOCUMENTATION (COLLECTIVELY THE "PRODUCT") IS CONDITIONED UPON AND
+   media and all subsequent copies of the Software, regardless of the form or
-LIMITED BY THE FOLLOWING TERMS AND CONDITIONS, INCLUDING THE "AS IS WARRANTY
+   media in which or on which the original and other copies may exist.  This
-STATEMENT" AND THE TERMS AND CONDITIONS OF THE ANCILLARY SOFTWARE LICENSE
+   license is not a sale of the Software or any copy.  The Software is
-AGREEMENTS ("ANCILLARY SOFTWARE LICENSES").
+   copyrighted by, proprietary to and a trade secret of PMC-Sierra or its
+   licensors.  The Software is protected by the copyright laws of the United
+   States and international copyright treaties.
 
-USE OF ANCILLARY SOFTWARE SHALL BE GOVERNED BY THE ANCILLARY SOFTWARE LICENSE,
+4. Termination. This license is effective until terminated.  This license will
-EXCEPT THAT THE DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITIES
+   terminate automatically without notice if you fail to comply with any of the
-PROVISIONS CONTAINED IN THE "AS-IS WARRANTY STATEMENT" OF THIS AGREEMENT SHALL
+   provisions.  You may terminate the license at any time by destroying the
-ALSO APPLY TO SUCH ANCILLARY SOFTWARE.  HP HAS IDENTIFIED ANCILLARY SOFTWARE
+   Software (including the related documentation) together with all copies or
-BY EITHER NOTING THE ANCILLARY SOFTWARE PROVIDER"S OWNERSHIP WITHIN EACH
+   modifications in any form.  Upon termination you shall destroy all copies of
-ANCILLARY SOFTWARE PROGRAM FILE AND/OR BY PROVIDING LICENSING INFORMATION IN
+   the Software (including the related documentation), together with any
-THE "ANCILLARY SOFTWARE" LIST. BY ACCEPTING THE TERMS AND CONDITIONS OF THIS
+   partial copies.
-AGREEMENT, YOU ARE ALSO ACCEPTING THE TERMS AND CONDITIONS OF EACH ANCILLARY
-SOFTWARE LICENSE IN THE ANCILLARY SOFTWARE LIST.
 
-IF AND ONLY IF THE PRODUCT INCLUDES SOFTWARE LICENSED UNDER THE GNU GENERAL
+5. Limited Warranty. PMC-Sierra and its Licensors warrant only that the media
-PUBLIC LICENSE ("GPL SOFTWARE"), YOU MAY OBTAIN A COMPLETE MACHINE-READABLE
+   upon which the Software is furnished will be free from defects in material
-COPY OF THE GPL SOFTWARE SOURCE CODE ("GPL SOURCE CODE") BY DOWNLOAD FROM A
+   or workmanship under normal use and service for a period of thirty (30) days
-SITE SPECIFIED IN THE FOLLOWING HP WEBSITE:
+   from the date of delivery to you.  THE FOREGOING WARRANTY EXPRESSLY EXCLUDES
-HTTP://H18004.WWW1.HP.COM/PRODUCTS/SERVERS/PROLIANTESSENTIALS/VALUEPACK/LICENSING.HTML.
+   ANY OPEN SOURCE SOFTWARE PROVIDED TO YOU WITH THE PMC-SIERRA SOFTWARE.
-UPON YOUR WRITTEN REQUEST, HP WILL PROVIDE, FOR A FEE COVERING THE COST OF
+   PMC-SIERRA AND ITS LICENSORS DO NOT AND CANNOT WARRANT THE PERFORMANCE OR
-DISTRIBUTION, A COMPLETE MACHINE-READABLE COPY OF THE GPL SOURCE CODE, BY MAIL,
+   RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE, OPEN SOURCE SOFTWARE OR
-TO YOU.  INFORMATION ABOUT HOW TO MAKE A WRITTEN REQUEST FOR GPL SOURCE CODE
+   DOCUMENTATION.  EXCEPT FOR THE FOREGOING LIMITED WARRANTY, PMC-SIERRA AND
-MAY BE FOUND AT THE FOLLOWING WEBSITE:
+   ITS LICENSORS MAKE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
-HTTP://H18004.WWW1.HP.COM/PRODUCTS/SERVERS/PROLIANTESSENTIALS/VALUEPACK/LICENSING.HTML .
+   LIMITED, AS TO NON-INFRINGEMENT OF THIRD PARTY RIGHTS, MERCHANTABILITY OR
+   FITNESS FOR A PARTICULAR PURPOSE.  Some states do not allow the exclusion of
+   implied warranties or limitations on how long an implied warranty may last,
+   so the above limitations may not apply to you.  This warranty gives you
+   specific legal rights and you may also have other rights which vary from
+   state to state.
 
+   The entire liability of PMC-Sierra and its licensors, and your exclusive
+   remedy for a breach of this warranty, shall be the replacement of any media
+   not meeting the above limited warranty which is returned to PMC-Sierra; or
+   if PMC-Sierra or its distributor is unable to deliver replacement media
+   which is free from defects in materials or workmanship, you may terminate
+   this Agreement by returning the Software and your money will be refunded.
 
-LICENSE TERMS
+   THE FOREGOING STATES THE SOLE AND EXCLUSIVE REMEDIES PMC-SIERRA AND ITS
+   LICENSORS WILL PROVIDE FOR BREACH OF WARRANTY.
 
-SUBJECT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT AND ANY RIGHTS,
+6. Limitation of Liability. IN NO EVENT WILL PMC-SIERRA OR ITS LICENSORS BE
-LIMITATIONS AND OBLIGATIONS SET FORTH IN THE ANCILLARY SOFTWARE LICENSES:
+   LIABLE TO YOU FOR ANY INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES,
+   INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR LOSS OF DATA, EVEN IF
+   PMC-SIERRA OR A LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+   DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.  IN NO EVENT WILL PMC-SIERRA
+   BE LIABLE UNDER THIS AGREEMENT FOR ANY AMOUNT IN EXCESS OF THE LICENSE FEES
+   YOU PAID FOR THE SOFTWARE OR, IF THE SOFTWARE WAS FREE, IN AN AMOUNT IN
+   EXCESS OF THE AMOUNT PAID BY YOU FOR THE HARDWARE SOLD IN CONJUNCTION WITH
+   THE SOFTWARE.  Some states do not allow the exclusion or limitation of
+   special, incidental, or consequential damages, so the above limitation or
+   exclusion may not apply to you.
 
-1.	LICENSE GRANT
+7. Export. You acknowledge that the laws and regulations of the United States
+   restrict the export and re-export of the Software and/or the Open Source
+   Software.  Further, you agree that you will not export or re-export the
+   Software and/or the Open Source Software or media in any form without the
+   appropriate United States and foreign government approval.
 
-a.	IF SOFTWARE DOES NOT REQUIRE AN ACTIVATION KEY.  If the Software does
+8. U.S. Government Restricted Rights.  If the Software is acquired under the
-not require an Activation Key and provided that You comply with all the terms
+   terms of a GSA contract, use, reproduction or disclosure is subject to the
-and conditions of this Agreement, HP grants You a non-exclusive,
+   restrictions set forth in the applicable ADP Schedule contract.  If the
-non-transferable (except as provided in Section 16), worldwide (except for the
+   Software is acquired under the terms of a DoD or civilian agency contract,
-countries referenced  in Section 12) license under HP's copyrights, to install,
+   use, duplication or disclosure by the Government is subject to the
-copy on as many computers as you need for your business, use, execute, make
+   restrictions of this license in accordance with 48 C.F.R. 12.212 of the
-archival or backup copies, and display ("Use") the object code version of the
+   Federal Acquisition Regulations and its successors and 48 C.F.R. 227.7202-1
-Product on the computer(s) on which this Product is installed and in the
+   of the DoD FAR Supplement and its successors. 
-operating environment as identified by HP in the accompanying materials.
 
-b.	IF SOFTWARE REQUIRES AN ACTIVATION KEY.  If the Software requires an
+9. Open Source Software. Certain programs distributed in conjunction with the
-Activation Key, and provided that You comply with all terms and conditions of
+   Software are distributed subject to third party licensing terms, including
-this Agreement, then depending upon the specific hardware configuration You
+   without limitation, the GNU General Public (GPL) License available at:
-employ, HP grants You the following license  ("License Type") and rights:
+   http://www.gnu.org/licenses/gpl.txt or by writing to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+   The source code for the programs licensed under the GPL is available to You,
+   for a period of three (3) years from the date of first commercial
+   distribution of the Software, upon request by contacting PMC-Sierra in
+   writing at 1380 Bordeaux Drive, Sunnyvale, California 94089, 
+   ATTN: Legal Department, Open Source Request.  PMC-Sierra will only charge
+   you the actual cost of the medium used to distribute the source code for
+   these programs and the cost of shipping.  More details regarding the open
+   source software and the applicable open source licenses are available in the
+   README files.
 
-	Authorized Copies.  You are licensed to install, make Authorized Copies
+10. General. You agree this is the complete agreement concerning this license.
-of (as defined in this section), execute, and display ("Use") the object code
+   In order to amend this license, a writing executed by both parties is
-version of the Product on an equivalent number of Computers, Host/Client Pairs,
+   required.  You assume full responsibility for the legal and responsible use
-Computer Nodes, or Clustered Computers (as defined in the table below) as you
+   of the Software.  This license shall be governed by California law as such
-have Authorized Copies.  Authorized Copies is defined as the number of copies
+   law applies to agreements between California residents entered into and to
-that you have paid for as stated in the invoice or comparable document
+   be performed within California, except as governed by Federal law.  Should
-evidencing an authorized quantity.
+   any provision of this license be declared unenforceable in any jurisdiction,
+   then such provision shall be deemed to be severable from this license and
+   shall not affect the remainder hereof.  All rights in the Software not
+   specifically granted in this license are reserved by PMC-Sierra.
 
-LICENSE TYPE 	SOFTWARE INSTALLS TO:		LICENSED RIGHTS
+If you have any questions concerning this license, contact: 
-		(hardware configuration)
-------------------------------------------------------------------------------
-Computer	A computer 			You have a right to install
-						and Use the Product on a single
-						computer. The installed copy
-						may not be transferred to or
-						used on any other computer.
 
-------------------------------------------------------------------------------
+PMC-Sierra, Inc.
-Node/Client	A set of computers with a	You have a right to install and
+Legal Department
-		minimum of one host and one	Use the Product on a Host/Client
+1380 Bordeaux Drive
-		client connected to each	Pair or a Single Node.  Copies
+Sunnyvale, California 94089
-		other ("Host/Client Pair"),	of the Product installed on a
+phone: (408) 239-8000 
-		or in certain instances, a	Host/Client Pair or Single Node
+fax: (408) 492-1157
-		single computer			may not be transferred to any
-		("Single Node")			other host or client computers
-						or other single nodes. You can
-						continue to Use the Product on
-						licensed clients when a new
-						server is introduced to the
-						licensed clients.
-
-------------------------------------------------------------------------------
-Cluster		More than two computers		You have a right to install and
-		physically connected together	Use the Product on each
-		in a cluster configuration	Clustered Computer. The
-		(each of which is referred to	installed copy may not be
-		as "Clustered Computer")	transferred to or used on any
-						other computer.
-
-		
-	Storage.  You may copy the Product into the local memory or storage
-device of the hardware configuration loaded with the Authorized Copies. You may
-copy the Product onto a reasonable number of network servers or a secure
-intranet for the sole purpose of distributing the Product to the Computers,
-Host/Client Pairs, Computer Nodes, or Clustered Computers.  You may make
-archival or back-up copies of the Product. You shall keep the activation key
-with the hardware configuration to which the activation key is licensed. You
-should keep copies of the activation key information for future retrieval
-purposes.
-
-2.	 NEW RELEASES.  "New Release" means a release of the Product that may
-contain fixes, corrections, or minor improvements to the Product.  New Releases
-are distributed from time to time solely at the option of HP.  If HP offers a
-New Release, it may come with its own terms and conditions, however if it does
-not, You may use the New Release only under the terms and conditions of this
-Agreement.
-3.	NEW VERSIONS.  "New Version" means a version of the Product that may
-contain significant changes, enhancements, and/or functional improvements to
-the Product.  New Versions are distributed solely at the option of HP.  If HP
-offers a New Version, it may come with its own terms and conditions, however
-if it does not, You may use the New Version only under the terms and conditions
-of this Agreement.
-4.	OWNERSHIP.   The Product is owned and copyrighted by Hewlett-Packard
-Development Company, L.P., HP's intellectual property management company, and
-by third party suppliers, except for the Ancillary Software, which is owned and
-copyrighted by the Ancillary Software providers indicated in the ANCILLARY
-SOFTWARE list.  Your right to Use the Product confers no title or ownership and
-is not a sale of the Product or any part thereof.  Third party suppliers and
-Ancillary Software providers are intended beneficiaries under this Agreement
-and may protect their rights in their respective portions of the Product
-directly against You.
-5.	TRANSFER. Without the prior written consent of HP, or unless
-specifically permitted in the Ancillary Software License,  You have no right
-(a) to rent, lease, lend, or otherwise transfer the rights to the Product to
-anyone else; (b) to Use the Product for commercial timesharing or bureau use;
-or (c) to copy the Product onto any public or distributed network.
-6.	 COPYRIGHT.  United States copyright laws, other countries' copyright
-laws, and international treaty provisions protect the Product.  You shall not
-remove any product identification, copyright notices, or proprietary notices
-from the Product.
-7.	SUPPORT.  Support terms and conditions and contact information are
-detailed in the Worldwide Limited Warranty and Technical Support for Industry
-Standard Server Products statement ("Support Statement"), a copy of which is
-available on the HP web site at www.hp.com.  Subject to the terms of the
-Support Statement, for HP software products installed on HP computers,
-technical support for questions regarding media and Product installation may
-be available for a ninety (90) day period from the date of purchase of the HP
-computer on which this Product is installed ("Support Term").  To access this
-support in North America, call the HP Technical Support Phone Center at
-1-800-652-6672.  This service is available during normal business hours,
-Monday through Friday, during the Support Term.  Outside North America, call
-the nearest HP Technical Support Center.  No other support, including
-without limitation any on-site support, is provided under this Agreement.
-8.	LIMITATION ON REVERSE ENGINEERING.  Reverse engineering of Ancillary
-Software shall be governed by its respective Ancillary Software License. As
-for the remainder of the Product, You shall not modify, disassemble, reverse
-engineer, decompile, decrypt, or otherwise attempt to access or determine the
-source code of the Product without HP's prior written consent.  Where You have
-other statutory rights with regard to software, You shall provide HP with
-reasonably detailed information regarding any intended disassembly or
-decompilation of the Product prior to performing such disassembly or
-decompilation.  You shall not decrypt the Product unless necessary for the
-licensed Use of the Product.
-9.	RESERVATION OF RIGHTS.  HP, its third party suppliers, and Ancillary
-Software providers reserve all rights not expressly granted to You in this
-Agreement.
-10.	TERM AND TERMINATION.  You may exercise the rights of this Agreement
-and of the Ancillary Software Licenses for a period of time starting at Your
-acceptance of the terms and conditions of this Agreement and for so long as
-You meet such terms and conditions ("Term").  Notwithstanding the foregoing,
-HP may terminate Your right to Use the Product, upon notice, for Your failure
-to comply with any such term or condition.  Immediately upon termination, You
-shall remove, destroy, or return to HP all copies of the Product, including
-those copies of the Product that are merged into Your adaptations, except for
-individual pieces of data in Your database.  With HP's prior written consent,
-one copy of the Product may be retained, for archival purposes only, subsequent
-to termination.  You may terminate this Agreement at any time by returning or
-destroying the Product together with merged portions in any form.
-11.	CONFIDENTIAL COMPUTER SOFTWARE.  Valid license from HP required for
-possession, use, or copying.  Consistent with FAR 12.211 and 12.212, Commercial
-Computer Software, Computer Software Documentation, and Technical Data for
-Commercial Items are licensed to the U.S. Government under vendor's standard
-commercial license.
-12.	COMPLIANCE WITH LAW.  The Product and any associated hardware,
-software, technology or services may not be exported, reexported, transferred
-or downloaded to persons or entities listed on the U.S. Department of Commerce
-Denied Persons List, Entity List of proliferation concern, or on any U.S.
-Treasury Department Designated Nationals exclusion list, any country under
-U.S. economic embargo, or to parties directly or indirectly involved in the
-development or production of nuclear, chemical, biological weapons or in
-missile technology programs as specified in the U.S. Export Administration
-Regulations (15 CFR 744).  By accepting this Agreement You confirm that You
-are not (i) located in (or a national resident of) any country under U.S.
-economic embargo, (ii) identified on any U.S. Department of Commerce Denied
-Persons List, Entity List or Treasury Department Designated Nationals exclusion
-list, and (iii) directly or indirectly involved in the development or
-production of nuclear, chemical, biological weapons or in missile technology
-programs as specified in the U.S. Export Administration Regulations.
-13.	APPLICABLE LAW. This Agreement shall be construed in accordance with
-the laws of the State of Texas, without regard to conflict of laws principles.
-The United Nations Convention on Contracts for the International Sale of Goods
-is specifically disclaimed.  If the Product was acquired outside the United
-States, then local law may apply.
-14.	SEVERABILITY.  If any term or provision of this Agreement is determined
-to be illegal or unenforceable, the validity or enforceability of the remainder
-of the terms or provisions herein will remain valid and in full force and
-effect. Failure or delay in enforcing any right or provision of this Agreement
-shall not be deemed a waiver of such right or provision with respect to any
-subsequent breach. Provisions herein, which by their nature extend beyond the
-termination of the license in the Product, will remain in effect until
-fulfilled.
-15.	CONSENT TO USE OF DATA. You agree that HP may collect and use technical
-information that You provide in connection with Your Use and request for
-technical support of the Product from HP, however, HP will not use this
-information in a form that personally identifies You.
-16.	ASSIGNMENT.  You may not assign, sublicense or transfer this Agreement,
-the Product, or any rights or obligations hereunder without the prior written
-consent of HP.  Any such attempted assignment, sublicense, or transfer will be
-null and void, and in such event, HP may terminate this Agreement immediately.
-Notwithstanding the foregoing, You may assign this Agreement and the rights
-granted hereunder with the transfer of all or substantially all of Your
-business.  The right to assign or transfer Ancillary Software is governed by
-the terms and conditions of the Ancillary Software Licenses.
-17.	ENTIRE AGREEMENT.  This Agreement, including all Ancillary Software
-Licenses in the ANCILLARY SOFTWARE list, is the final, complete and exclusive
-agreement between You and HP relating to the Product, and supersedes any
-previous communications, representations, or agreements between the parties,
-whether oral or written, regarding the subject matter hereof.  Any additional
-or different terms and conditions not expressly set forth herein will not
-apply.  This Agreement may not be changed except by an amendment signed by an
-authorized representative of both You and HP.  To the extent the terms of any
-HP policies or programs for support services conflict with the terms of this
-Agreement, the terms of this Agreement shall control.
-18.	WARRANTY
-
-	a.	NO ACTIVATION KEY REQUIRED SOFTWARE - AS-IS WARRANTY STATEMENT:
-
-	DISCLAIMER.  TO THE EXTENT ALLOWED BY APPLICABLE LAW, THIS PRODUCT AND
-SUPPORT SERVICES, IF ANY, ARE PROVIDED TO YOU "AS IS" WITHOUT WARRANTIES OF
-ANY KIND, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED.  HP SPECIFICALLY
-DISCLAIMS ANY IMPLIED WARRANTIES OF ANY KIND, INCLUDING WITHOUT LIMITATION,
-WARRANTY OF MERCHANTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT, TITLE,
-ACCURACY OF INFORMATIONAL CONTENT, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY
-OR COMPLETENESS OF RESPONSES, RESULTS, OR WORKMANLIKE EFFORT, LACK OF VIRUSES,
-AND LACK OF NEGLIGENCE, ALL WITH REGARD TO THE PRODUCT, AND THE PROVISION OF
-OR FAILURE TO PROVIDE SUPPORT SERVICES.  IN ADDITION, WITHOUT LIMITATION,
-THERE IS NO WARRANTY OF QUIET ENJOYMENT, QUIET POSSESSION AND CORRESPONDENCE
-TO DESCRIPTION WITH REGARD TO THE PRODUCT.  YOU ASSUME THE ENTIRE RISK AS TO
-THE RESULTS AND PERFORMANCE OF THE PRODUCT.  NO ORAL OR WRITTEN INFORMATION OR
-ADVICE GIVEN BY HP, HP"S AUTHORIZED REPRESENTATIVES, OR ANY OTHER PARTY SHALL
-CREATE A WARRANTY OR AMEND THIS "AS IS" WARRANTY.  Some jurisdictions do not
-allow exclusions of implied warranties or conditions, so the above exclusion
-may not apply to You to the extent prohibited by such local laws. You may have
-other rights that vary from country to country, state to state, or province to
-province.
-
-	b.	ACTIVATION KEY REQUIRED SOFTWARE - LIMITED WARRANTY.
-
-HP warrants that the Product will perform substantially in accordance with the
-accompanying materials for a period of ninety (90) days from the date of
-purchase.  If an implied warranty or condition is created by Your
-state/jurisdiction and federal or state/provincial law prohibits disclaimer of
-it, You also have an implied warranty or condition, BUT ONLY AS TO DEFECTS FOR
-WHICH CLAIMS ARE MADE WITHIN NINETY (90) DAYS FROM THE DATE OF PURCHASE. AS TO
-ANY DEFECTS DISCOVERED FOR WHICH A CLAIM IS NOT MADE WITHIN THE NINETY-DAY
-PERIOD, THERE IS NO WARRANTY OR CONDITION OF ANY KIND.
-Some states/jurisdictions do not allow limitations on how long an implied
-warranty or condition lasts, so the above limitation may not apply to You.
-
-	DISCLAIMER.  The Limited Warranty that appears above is the only
-express warranty made to You and is provided in lieu of any other express
-warranties or implied warrantees (if any) created by any documentation,
-packaging or otherwise.  EXCEPT FOR THE LIMITED WARRANTY, AND TO THE MAXIMUM
-EXTENT PERMITTED BY APPLICABLE LAW, HP AND ITS SUPPLIERS PROVIDE THE PRODUCT
-AND SUPPORT SERVICES (IF ANY) "AS IS" AND WITH ALL FAULTS, AND HEREBY DISCLAIM
-ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS, IMPLIED OR STATUTORY,
-INCLUDING, BUT NOT LIMITED TO, ANY (IF ANY) IMPLIED WARRANTIES, DUTIES OR
-CONDITIONS OF MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE,
-SATISFACTORY QUALITY, NON-INFRINGEMENT OF TITLE, OF ACCURACY OR COMPLETENESS
-OF RESPONSES, OF RESULTS, OF WORKMANLIKE EFFORT, OF LACK OF VIRUSES, AND OF
-LACK OF NEGLIGENCE, ALL WITH REGARD TO THE PRODUCT, AND THE PROVISIONS OF OR
-FAILURE TO PROVIDE SUPPORT SERVICES.  ALSO, THERE IS NO WARRANTY OR CONDITION
-OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, CORRESPONDENCE TO DESCRIPTION,
-OR NON-INFRINGEMENT WITH REGARD TO THE PRODUCT.
-
-19.	LIMITATION OF LIABILITY.
-
-	a.	 FOR ALL SOFTWARE WHETHER OR NOT AN ACTIVATION KEY IS REQUIRED
-
-EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL HP OR ITS
-SUBSIDIARIES, AFFILIATES, DIRECTORS, OFFICERS, EMPLOYEES, AGENTS OR SUPPLIERS
-BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE,
-OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS) ARISING
-OUT OF THE USE, THE INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT,
-WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER
-OR NOT HP WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  THE PRODUCT IS NOT
-DESIGNED, MANUFACTURED OR INTENDED FOR USE IN THE PLANNING, CONSTRUCTION,
-MAINTENANCE, OR OPERATION OF A NUCLEAR FACILITY, AIRCRAFT NAVIGATION OR
-AIRCRAFT COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, LIFE SUPPORT MACHINES,
-OR WEAPONS SYSTEMS (COLLECTIVELY "HIGH RISK APPLICATIONS").  YOU ARE SOLELY
-LIABLE IF THE PRODUCT IS USED FOR HIGH RISK APPLICATIONS, AND YOU SHALL
-INDEMNIFY, DEFEND AND HOLD HP HARMLESS FROM ALL LOSS, DAMAGE, EXPENSE OR
-LIABILITY IN CONNECTION WITH SUCH USE.   YOU ASSUME THE ENTIRE RISK AS TO YOUR
-USE OF THE PRODUCT.  SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
-LIMITATION OF LIABILITY FOR INCIDENTIAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
-LIMITATION MAY NOT APPLY TO YOU TO THE EXTENT PROHIBITED BY SUCH LOCAL LAWS.
-
-	b.	FOR SOFTWARE REQUIRING AN ACTIVATION KEY
-
-Notwithstanding any damages that You might incur for any reason whatsoever
-(including, without limitation, all damages referenced above and all direct
-or general damages), the entire liability of HP and any of its suppliers under
-any provision of this EULA and Your exclusive remedy for all of the foregoing
-(except for any remedy of repair or replacement if elected by HP with respect
-to any breach of the Limited Warranty) shall be limited to the greater of the
-amount actually paid by You for the Product or U.S. $5.00.  The foregoing
-limitations, exclusions and disclaimers (including Warranty above) shall apply
-to the maximum extent permitted by applicable law, even if any remedy fails of
-its essential purpose.
-
-REV08/51/03	End User License Agreement

amd64/usr/share/smartupdate/ssaducli/component.xml

@@ -1,41 +1,49 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <manifest schema_version="2.0.0.0">
   <meta lang="en">
-    <product id="76473ecbae4849129ae6336d910a3b6f">
+    <product id="7a0e2103ab3d449ea173c873ce94c871">
       <product_version>
-        <id product="76473ecbae4849129ae6336d910a3b6f" version="295e6e1647294f9fbe512a2980ee41f2" lucid_version="hpessaducli.linux.x64@3.30.14.0__pubsw-linux_de,en,es,fr,it,ja"/>
+        <id product="7a0e2103ab3d449ea173c873ce94c871" version="f86788fdfc8b43e6805bf3232834c3b2" lucid_version="ssaducli.linux.x64@5.10.44.0__pubsw-linux_de,en,es,fr,it,ja"/>
         <different>new</different>
-        <build number="7"/>
+        <build number="10"/>
         <type id="publishablesoftware-linux"/>
         <name>
-          <name_xlate lang="en">HPE Smart Storage Administrator Diagnostic Utility (HPE SSADU) CLI for Linux 64-bit</name_xlate>
+          <name_xlate lang="en">Smart Storage Administrator Diagnostic Utility (SSADU) CLI for Linux 64-bit</name_xlate>
         </name>
         <alt_name>
-          <alt_name_xlate lang="en">HPE Smart Storage Administrator Diagnostic Utility (HPE SSADU) CLI for Linux 64-bit</alt_name_xlate>
+          <alt_name_xlate lang="en">Smart Storage Administrator Diagnostic Utility (SSADU) CLI for Linux 64-bit</alt_name_xlate>
         </alt_name>
-        <version value="3.30.14.0" revision="" type_of_change="1"/>
+        <version value="5.10.44.0" revision="" type_of_change="0"/>
         <manufacturer_name>
           <manufacturer_name_xlate lang="en">Hewlett Packard Enterprise</manufacturer_name_xlate>
         </manufacturer_name>
         <operating_systems>
+          <operating_system key="2951">
+            <operating_system_xlate>SUSE LINUX Enterprise Server 11 (AMD64/EM64T)</operating_system_xlate>
+          </operating_system>
           <operating_system key="3359">
             <operating_system_xlate>Red Hat Enterprise Linux 6 Server (x86-64)</operating_system_xlate>
           </operating_system>
           <operating_system key="4196">
             <operating_system_xlate>Red Hat Enterprise Linux 7 Server</operating_system_xlate>
           </operating_system>
-          <operating_system key="2951">
-            <operating_system_xlate>SUSE LINUX Enterprise Server 11 (AMD64/EM64T)</operating_system_xlate>
-          </operating_system>
           <operating_system key="4199">
             <operating_system_xlate>SUSE Linux Enterprise Server 12</operating_system_xlate>
           </operating_system>
+          <operating_system key="9677">
+            <operating_system_xlate>Red Hat Enterprise Linux 8 Server</operating_system_xlate>
+          </operating_system>
+          <operating_system key="9398">
+            <operating_system_xlate>SUSE Linux Enterprise Server 15</operating_system_xlate>
+          </operating_system>
         </operating_systems>
         <products>
+          <product rom="U46"/>
           <product rom="A40"/>
-          <product rom="U23"/>
+          <product rom="U50"/>
           <product rom="U37"/>
           <product rom="U36"/>
+          <product rom="A43"/>
           <product rom="U34"/>
           <product rom="U33"/>
           <product rom="U32"/>
@@ -52,28 +60,30 @@
           <product rom="P95"/>
           <product rom="U39"/>
           <product rom="O42"/>
-          <product rom="U44"/>
+          <product rom="A46"/>
           <product rom="I39"/>
           <product rom="I38"/>
-          <product rom="U25"/>
           <product rom="I37"/>
           <product rom="I36"/>
           <product rom="U24"/>
-          <product rom="U43"/>
+          <product rom="U25"/>
           <product rom="U40"/>
           <product rom="U41"/>
           <product rom="U20"/>
           <product rom="U21"/>
           <product rom="U22"/>
-          <product rom="A41"/>
+          <product rom="U23"/>
-          <product rom="U45"/>
+          <product rom="A48"/>
           <product rom="Carbondale14"/>
           <product rom="U19"/>
           <product rom="P89"/>
+          <product rom="U47"/>
+          <product rom="A47"/>
           <product rom="U18"/>
           <product rom="P86"/>
           <product rom="P85"/>
           <product rom="U27"/>
+          <product rom="A42"/>
           <product rom="I42"/>
           <product rom="I43"/>
           <product rom="I40"/>
@@ -96,37 +106,33 @@
         <languages langlist="fr,en,de,it,ja,es">
           <languages_xlate lang="en">French,English (US),German,Italian,Japanese,Spanish</languages_xlate>
         </languages>
-        <release_date year="2018" month="02" day="22" hour="15" minute="53" second="58"/>
+        <release_date year="2021" month="02" day="19" hour="00" minute="00" second="00"/>
         <description>
-          <description_xlate lang="en"><![CDATA[The HPE Smart Storage Administrator Diagnostic Utility CLI is a commandline-based disk configuration program for Smart Array Controllers and any supported devices, including providing HPE SmartSSD Wear Gauge information for supported drives.]]></description_xlate>
+          <description_xlate lang="en"><![CDATA[The Smart Storage Administrator Diagnostic Utility CLI is a commandline-based disk configuration program for Smart Array Controllers and any supported devices, including providing SmartSSD Wear Gauge information for supported drives.]]></description_xlate>
         </description>
         <prerequisite_notes/>
         <installation_notes>
           <installation_notes_xlate lang="en">
             <installation_notes_xlate_part><![CDATA[<ul>
-	<li>HPE SSADUCLI is distributed using Red Hat Package Manager (RPM) packages.</li>
+	<li>SSADUCLI is distributed using Red Hat Package Manager (RPM) packages.</li>
-</ul>
+	<li>If there is an older version of SSADUCLI installed on the system, please use &quot;rpm -e ssacli&quot; to remove it first.</li>
-
+	<li>Use &quot;rpm -i &lt;file name&gt;&quot; to install the application.</li>
-<ul>
+	<li>Please type &quot;man rpm&quot; for other details regarding RPM.</li>
-	<li>If there is an older version of&nbsp;HPE SSADUCLI installed on the system (Before version 2.60.18.0), please use &quot;rpm -e hpssaducli&quot; to remove it first.</li>
-	<li>If there is an older version of&nbsp;HPE SSADUCLI installed on the system (2.60.18.0 and later), please use &quot;rpm -e ssaducli&quot; to remove it first.</li>
-</ul>
-
-<ul>
-	<li>Use &quot;rpm -i &quot; to install the application.</li>
 </ul>
 ]]></installation_notes_xlate_part>
           </installation_notes_xlate>
         </installation_notes>
         <availability_notes/>
         <documentation_notes/>
-        <upgrade_requirement value="Recommended"/>
+        <upgrade_requirement value="Optional"/>
         <prerequisites>
           <supported_operating_systems>
-            <supported_operating_system platform="suse_linux_enterprise_server_x86_64" major="12" minor="0" sr="OEM" name="SUSE Linux Enterprise Server 12"/>
-            <supported_operating_system platform="red_hat_enterprise_linux_x86_64" major="6" minor="0" sr="OEM" name="Red Hat Enterprise Linux 6 Server (x86-64)"/>
             <supported_operating_system platform="suse_linux_enterprise_server_x86_64" major="11" minor="0" sr="OEM" name="SUSE LINUX Enterprise Server 11 (AMD64/EM64T)"/>
+            <supported_operating_system platform="red_hat_enterprise_linux_x86_64" major="6" minor="0" sr="OEM" name="Red Hat Enterprise Linux 6 Server (x86-64)"/>
             <supported_operating_system platform="red_hat_enterprise_linux_x86_64" major="7" minor="0" sr="OEM" name="Red Hat Enterprise Linux 7 Server"/>
+            <supported_operating_system platform="suse_linux_enterprise_server_x86_64" major="12" minor="0" sr="OEM" name="SUSE Linux Enterprise Server 12"/>
+            <supported_operating_system platform="red_hat_enterprise_linux_x86_64" major="8" minor="0" sr="OEM" name="Red Hat Enterprise Linux 8 Server"/>
+            <supported_operating_system platform="suse_linux_enterprise_server_x86_64" major="15" minor="0" sr="OEM" name="SUSE Linux Enterprise Server 15"/>
           </supported_operating_systems>
           <supported_devices/>
           <required_diskspace/>
@@ -138,7 +144,7 @@
             <command_params/>
             <reboot_required value="no"/>
             <reboot_details value="Optional">
-              <reboot_details_xlate lang="en">Reboot is optional after installation. Updates will be effective after reboot. Hardware stability will be maintained without reboot</reboot_details_xlate>
+              <reboot_details_xlate lang="en">Reboot is optional after installation. Updates will be effective after reboot. Hardware stability will be maintained without reboot.</reboot_details_xlate>
             </reboot_details>
             <per_device_install_time_seconds>0</per_device_install_time_seconds>
           </install>
@@ -156,13 +162,13 @@
             </sw_key>
           </sw_keys_and>
         </sw_keys>
-        <filename>ssaducli-3.30-14.0.x86_64.rpm</filename>
+        <filename>ssaducli-5.10-44.0.x86_64.rpm</filename>
         <component_config/>
         <files>
-          <file size="3MB" bytes="3823577" date_modified="2018-04-25T10:36:24" md5sum="" sha1sum="" version="3.30" release="14.0">
+          <file size="4MB" bytes="4224204" date_modified="2021-02-16T11:12:15" md5sum="" sha1sum="" version="5.10" release="44.0">
-            <name>ssaducli-3.30-14.0.x86_64.rpm</name>
+            <name>ssaducli-5.10-44.0.x86_64.rpm</name>
             <url id="http://ftp.hp.com"/>
-            <url id="file://.">file://./packages/ssaducli-3.30-14.0.x86_64.rpm</url>
+            <url id="file://.">file://./packages/ssaducli-5.10-44.0.x86_64.rpm</url>
             <file_list>
               <file>./opt/smartstorageadmin/ssaducli</file>
               <file>./opt/smartstorageadmin/ssaducli/README.TXT</file>
@@ -179,11 +185,9 @@
         <file_details/>
         <revision_history>
           <revision>
-            <version value="3.30.14.0" revision="" type_of_change="1"/>
+            <version value="5.10.44.0" revision="" type_of_change="0"/>
             <revision_enhancements_xlate lang="en">
-              <revision_enhancements_xlate_part><![CDATA[<ul>
+              <revision_enhancements_xlate_part><![CDATA[<p>Adding support&nbsp;to the HPE&nbsp;SR Gen10 Plus&nbsp;Controllers.</p>
-	<li>Added the ability to enable or disable Drive Write Cache for configured and unconfigured drives</li>
-</ul>
 ]]></revision_enhancements_xlate_part>
             </revision_enhancements_xlate>
             <revision_fixes_xlate lang="en">
@@ -191,12 +195,9 @@
             </revision_fixes_xlate>
           </revision>
           <revision>
-            <version value="3.25.4.0" type_of_change="0"/>
+            <version/>
             <revision_enhancements_xlate lang="en">
-              <revision_enhancements_xlate_part><![CDATA[<ul>
+              <revision_enhancements_xlate_part/>
-	<li>Added support for Freeze/Anti-freeze of the Sanitize command.</li>
-</ul>
-]]></revision_enhancements_xlate_part>
             </revision_enhancements_xlate>
             <revision_fixes_xlate lang="en">
               <revision_fixes_xlate_part/>

build_orig.sh

@@ -0,0 +1,65 @@
+#!/bin/bash
+# the directory of the script
+DIR=`cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd`
+echo "Working directory $DIR"
+
+# the temp directory used, within $DIR
+WORK_DIR=`mktemp -d -p "$DIR"`
+echo "Creating temp working directory $WORK_DIR"
+
+# deletes the temp directory
+function cleanup {
+  rm -rf "$WORK_DIR"
+  echo "Deleted temp working directory $WORK_DIR"
+}
+
+# register the cleanup function to be called on the EXIT signal
+trap cleanup EXIT
+
+# Download Files specified in files.diz
+while IFS=! read type app version outputfile url md5
+do
+  echo "Downloading $app Version: $version"
+  #use -O for output file. define $outputfile yourself
+  wget --no-check-certificate --tries=1 -O $DIR/../$outputfile --timeout=5 "$url"
+  # use $(..) instead of backticks.
+  calculated_md5=$(md5sum "$DIR/../$outputfile" | cut -f 1 -d " ")
+  # compare md5
+  case "$calculated_md5" in
+    "$md5" )
+      echo "$DIR/../$outputfile md5 ok"
+    ;;
+    *)
+      echo "$DIR/../$outputfile md5 NOT ok"
+      exit 1
+    ;;
+  esac
+done < "$DIR/files.diz"
+
+# Extract to specified dir and set some variables
+while IFS=! read type app version outputfile url md5
+do
+  mkdir -p $WORK_DIR/${app}-${version}/${type}
+  pushd $WORK_DIR/${app}-${version}/${type}
+  rpm2cpio $DIR/../$outputfile | cpio -idmv
+  echo "${app}_${version}.orig.tar.gz" > $WORK_DIR/filename.txt
+  echo "${app}-${version}" > $WORK_DIR/dirname.txt
+  echo "${version}" > $WORK_DIR/version.txt
+  popd
+done < "$DIR/files.diz"
+
+FILENAME=`cat $WORK_DIR/filename.txt`
+DIRNAME=`cat $WORK_DIR/dirname.txt`
+echo "Creating $DIR/../$FILENAME "
+
+pushd $WORK_DIR
+tar -czf $DIR/../$FILENAME $DIRNAME
+popd
+
+VER=`cat $WORK_DIR/version.txt`
+echo "Importing $DIR/../$FILENAME as $VER into git"
+cleanup
+
+gbp import-orig --pristine-tar -u $VER $DIR/../$FILENAME
+
+exit 0

debian/README.source

@@ -0,0 +1,11 @@
+hpssacli (9.20.9.0-1) unstable; urgency=low
+
+  Sources have been repacked from the following upstream packages:
+
+    a569ddb584d2133bf44f06992d746f51  hpssacli-9.20-9.0.i386.rpm
+    c0d6f57fe3cf1fa6342fb0097e3ae100  hpssacli-9.20-9.0.x86_64.rpm
+
+  Both have been turned into tarballs using alien and then uncompressed to
+  i386 and amd64 sub-directories.
+
+ -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Mon, 20 Aug 2012 19:58:55 +0200

debian/changelog

@@ -0,0 +1,59 @@
+ssaducli (5.10.44.0) UNRELEASED; urgency=medium
+
+  [ Mario Fetka ]
+  * package renamed and update
+  * Bump to new version
+
+  [ root ]
+  * New Version
+
+ -- root <mario.fetka@disconnected-by-peer.at>  Tue, 12 Aug 2025 17:45:09 +0200
+
+hpssaducli (2.40.13.0-2) UNRELEASED; urgency=medium
+
+  * cleanup typos
+
+ -- Mario Fetka <mario@localhost.localdomain>  Thu, 26 May 2016 21:09:53 +0200
+
+hpssaducli (2.20.11.0-1) unstable; urgency=low
+
+  * Non-maintainer upload.
+  * Bump to new release
+  * Imported Upstream version 2.0.23.0
+
+ -- Mario Fetka <mario@localhost.localdomain>  Sat, 21 May 2016 07:46:39 +0200
+
+hpssaducli (9.20.9.0-1) unstable; urgency=low
+
+  [ Adam Cécile (Le_Vert) ]
+  * New upstream release (Closes: #225).
+  * Now ship amd64 binaries along i386 ones.
+  * Rewrite debian/copyright to use machine readable format.
+
+  [ Mario Fetka ]
+
+ -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Mon, 20 Aug 2012 19:58:55 +0200
+
+hpssaducli (8.25.5-1) unstable; urgency=low
+
+  * New upstream release.
+  * Do not depend on libstdc++2.10 anymore because it has been removed
+    from current distros. Ship our own lib (extracted from etch package)
+    in a private directory.
+  * Add upstream changelog.
+  * Fix download url (debian/copyright).
+
+ -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Mon, 27 Apr 2009 15:41:54 +0200
+
+hpssaducli (8.10-1) unstable; urgency=low
+
+  * New upstream release.
+  * debian/watch added (url stolen to gentoo).
+
+ -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Tue, 23 Dec 2008 14:39:26 +0100
+
+hpssaducli (7.80-1) unstable; urgency=low
+
+  * Initial release.
+
+ -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Wed, 20 Aug 2008 13:41:40 +0200

debian/compat

@@ -0,0 +1 @@
+7

debian/control

@@ -0,0 +1,13 @@
+Source: ssaducli
+Section: non-free/admin
+Priority: optional
+Maintainer: Mario Fetka (geos_one) <mario.fetka@gmail.com>
+Build-Depends: debhelper (>= 5), sharutils
+Standards-Version: 3.9.3
+
+Package: ssaducli
+Architecture: i386 amd64
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: HPE Smart Storage Administrator Diagnostics and SmartSSD Wear Gauge Utility CLI
+ This is the proprietary command line utility from HP to manage HP/Compaq
+ SmartArray hardware RAID HBAs mostly found in Proliant servers.

debian/copyright

@@ -0,0 +1,363 @@
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: hpacucli
+Source: opt/smartstorageadmin/ssacli/bin/ssacli.license
+
+Files: *
+		PROLIANT ESSENTIALS SOFTWARE
+
+		END USER LICENSE AGREEMENT
+
+PLEASE READ THIS END USER LICENSE AGREEMENT ("AGREEMENT") CAREFULLY.  THIS
+AGREEMENT IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR SINGLE
+ENTITY) ("YOU") AND HEWLETT-PACKARD COMPANY ("HP").  BY CLICKING THE "AGREE"
+BUTTON BELOW, COPYING, INSTALLING, OR OTHERWISE USING THE SOFTWARE,
+(i) YOU DO SO WITH THE INTENT TO ELECTRONICALLY "EXECUTE" THIS AGREEMENT, AND
+(ii) YOU AGREE TO BE BOUND BY AND COMPLY WITH THE FOLLOWING TERMS AND
+CONDITIONS, INCLUDING THE WARRANTY STATEMENT, AS WELL AS ANY TERMS AND
+CONDITIONS CONTAINED IN THE "ANCILLARY SOFTWARE" LIST.
+
+IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT,
+(A) IF THIS AGREEMENT IS DISPLAYED ELECTRONICALLY, YOU MAY INDICATE REJECTION
+    OF THIS AGREEMENT BY CLICKING THE "DISAGREE" BUTTON;
+(B) YOU SHALL NOT INSTALL THE SOFTWARE; AND
+(C) HP DOES NOT GRANT YOU ANY RIGHTS TO USE THE SOFTWARE.
+NOTWITHSTANDING THE FOREGOING, INSTALLING OR OTHERWISE USING THE SOFTWARE
+INDICATES YOUR ACCEPTANCE OF THE TERMS AND CONDITIONS OF THIS AGREEMENT.
+IF YOU PURCHASED THE SOFTWARE, YOU MAY RETURN THE SOFTWARE TO THE PLACE OF
+PURCHASE FOR A FULL REFUND.
+
+THE SOFTWARE PROVIDED HEREIN, IS PROVIDED BY HP AND BY THIRD PARTIES, INCLUDING
+THE OPEN SOURCE COMMUNITY ("ANCILLARY SOFTWARE").  USE OF THE HP SOFTWARE, THE
+ANCILLARY SOFTWARE, ACCOMPANYING PRINTED MATERIALS, AND THE "ONLINE" OR
+ELECTRONIC DOCUMENTATION (COLLECTIVELY THE "PRODUCT") IS CONDITIONED UPON AND
+LIMITED BY THE FOLLOWING TERMS AND CONDITIONS, INCLUDING THE "AS IS WARRANTY
+STATEMENT" AND THE TERMS AND CONDITIONS OF THE ANCILLARY SOFTWARE LICENSE
+AGREEMENTS ("ANCILLARY SOFTWARE LICENSES").
+
+USE OF ANCILLARY SOFTWARE SHALL BE GOVERNED BY THE ANCILLARY SOFTWARE LICENSE,
+EXCEPT THAT THE DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITIES
+PROVISIONS CONTAINED IN THE "AS-IS WARRANTY STATEMENT" OF THIS AGREEMENT SHALL
+ALSO APPLY TO SUCH ANCILLARY SOFTWARE.  HP HAS IDENTIFIED ANCILLARY SOFTWARE
+BY EITHER NOTING THE ANCILLARY SOFTWARE PROVIDER"S OWNERSHIP WITHIN EACH
+ANCILLARY SOFTWARE PROGRAM FILE AND/OR BY PROVIDING LICENSING INFORMATION IN
+THE "ANCILLARY SOFTWARE" LIST. BY ACCEPTING THE TERMS AND CONDITIONS OF THIS
+AGREEMENT, YOU ARE ALSO ACCEPTING THE TERMS AND CONDITIONS OF EACH ANCILLARY
+SOFTWARE LICENSE IN THE ANCILLARY SOFTWARE LIST.
+
+IF AND ONLY IF THE PRODUCT INCLUDES SOFTWARE LICENSED UNDER THE GNU GENERAL
+PUBLIC LICENSE ("GPL SOFTWARE"), YOU MAY OBTAIN A COMPLETE MACHINE-READABLE
+COPY OF THE GPL SOFTWARE SOURCE CODE ("GPL SOURCE CODE") BY DOWNLOAD FROM A
+SITE SPECIFIED IN THE FOLLOWING HP WEBSITE:
+HTTP://H18004.WWW1.HP.COM/PRODUCTS/SERVERS/PROLIANTESSENTIALS/VALUEPACK/LICENSING.HTML.
+UPON YOUR WRITTEN REQUEST, HP WILL PROVIDE, FOR A FEE COVERING THE COST OF
+DISTRIBUTION, A COMPLETE MACHINE-READABLE COPY OF THE GPL SOURCE CODE, BY MAIL,
+TO YOU.  INFORMATION ABOUT HOW TO MAKE A WRITTEN REQUEST FOR GPL SOURCE CODE
+MAY BE FOUND AT THE FOLLOWING WEBSITE:
+HTTP://H18004.WWW1.HP.COM/PRODUCTS/SERVERS/PROLIANTESSENTIALS/VALUEPACK/LICENSING.HTML .
+
+
+LICENSE TERMS
+
+SUBJECT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT AND ANY RIGHTS,
+LIMITATIONS AND OBLIGATIONS SET FORTH IN THE ANCILLARY SOFTWARE LICENSES:
+
+1.	LICENSE GRANT
+
+a.	IF SOFTWARE DOES NOT REQUIRE AN ACTIVATION KEY.  If the Software does
+not require an Activation Key and provided that You comply with all the terms
+and conditions of this Agreement, HP grants You a non-exclusive,
+non-transferable (except as provided in Section 16), worldwide (except for the
+countries referenced  in Section 12) license under HP's copyrights, to install,
+copy on as many computers as you need for your business, use, execute, make
+archival or backup copies, and display ("Use") the object code version of the
+Product on the computer(s) on which this Product is installed and in the
+operating environment as identified by HP in the accompanying materials.
+
+b.	IF SOFTWARE REQUIRES AN ACTIVATION KEY.  If the Software requires an
+Activation Key, and provided that You comply with all terms and conditions of
+this Agreement, then depending upon the specific hardware configuration You
+employ, HP grants You the following license  ("License Type") and rights:
+
+	Authorized Copies.  You are licensed to install, make Authorized Copies
+of (as defined in this section), execute, and display ("Use") the object code
+version of the Product on an equivalent number of Computers, Host/Client Pairs,
+Computer Nodes, or Clustered Computers (as defined in the table below) as you
+have Authorized Copies.  Authorized Copies is defined as the number of copies
+that you have paid for as stated in the invoice or comparable document
+evidencing an authorized quantity.
+
+LICENSE TYPE 	SOFTWARE INSTALLS TO:		LICENSED RIGHTS
+		(hardware configuration)
+------------------------------------------------------------------------------
+Computer	A computer 			You have a right to install
+						and Use the Product on a single
+						computer. The installed copy
+						may not be transferred to or
+						used on any other computer.
+
+------------------------------------------------------------------------------
+Node/Client	A set of computers with a	You have a right to install and
+		minimum of one host and one	Use the Product on a Host/Client
+		client connected to each	Pair or a Single Node.  Copies
+		other ("Host/Client Pair"),	of the Product installed on a
+		or in certain instances, a	Host/Client Pair or Single Node
+		single computer			may not be transferred to any
+		("Single Node")			other host or client computers
+						or other single nodes. You can
+						continue to Use the Product on
+						licensed clients when a new
+						server is introduced to the
+						licensed clients.
+
+------------------------------------------------------------------------------
+Cluster		More than two computers		You have a right to install and
+		physically connected together	Use the Product on each
+		in a cluster configuration	Clustered Computer. The
+		(each of which is referred to	installed copy may not be
+		as "Clustered Computer")	transferred to or used on any
+						other computer.
+
+		
+	Storage.  You may copy the Product into the local memory or storage
+device of the hardware configuration loaded with the Authorized Copies. You may
+copy the Product onto a reasonable number of network servers or a secure
+intranet for the sole purpose of distributing the Product to the Computers,
+Host/Client Pairs, Computer Nodes, or Clustered Computers.  You may make
+archival or back-up copies of the Product. You shall keep the activation key
+with the hardware configuration to which the activation key is licensed. You
+should keep copies of the activation key information for future retrieval
+purposes.
+
+2.	 NEW RELEASES.  "New Release" means a release of the Product that may
+contain fixes, corrections, or minor improvements to the Product.  New Releases
+are distributed from time to time solely at the option of HP.  If HP offers a
+New Release, it may come with its own terms and conditions, however if it does
+not, You may use the New Release only under the terms and conditions of this
+Agreement.
+3.	NEW VERSIONS.  "New Version" means a version of the Product that may
+contain significant changes, enhancements, and/or functional improvements to
+the Product.  New Versions are distributed solely at the option of HP.  If HP
+offers a New Version, it may come with its own terms and conditions, however
+if it does not, You may use the New Version only under the terms and conditions
+of this Agreement.
+4.	OWNERSHIP.   The Product is owned and copyrighted by Hewlett-Packard
+Development Company, L.P., HP's intellectual property management company, and
+by third party suppliers, except for the Ancillary Software, which is owned and
+copyrighted by the Ancillary Software providers indicated in the ANCILLARY
+SOFTWARE list.  Your right to Use the Product confers no title or ownership and
+is not a sale of the Product or any part thereof.  Third party suppliers and
+Ancillary Software providers are intended beneficiaries under this Agreement
+and may protect their rights in their respective portions of the Product
+directly against You.
+5.	TRANSFER. Without the prior written consent of HP, or unless
+specifically permitted in the Ancillary Software License,  You have no right
+(a) to rent, lease, lend, or otherwise transfer the rights to the Product to
+anyone else; (b) to Use the Product for commercial timesharing or bureau use;
+or (c) to copy the Product onto any public or distributed network.
+6.	 COPYRIGHT.  United States copyright laws, other countries' copyright
+laws, and international treaty provisions protect the Product.  You shall not
+remove any product identification, copyright notices, or proprietary notices
+from the Product.
+7.	SUPPORT.  Support terms and conditions and contact information are
+detailed in the Worldwide Limited Warranty and Technical Support for Industry
+Standard Server Products statement ("Support Statement"), a copy of which is
+available on the HP web site at www.hp.com.  Subject to the terms of the
+Support Statement, for HP software products installed on HP computers,
+technical support for questions regarding media and Product installation may
+be available for a ninety (90) day period from the date of purchase of the HP
+computer on which this Product is installed ("Support Term").  To access this
+support in North America, call the HP Technical Support Phone Center at
+1-800-652-6672.  This service is available during normal business hours,
+Monday through Friday, during the Support Term.  Outside North America, call
+the nearest HP Technical Support Center.  No other support, including
+without limitation any on-site support, is provided under this Agreement.
+8.	LIMITATION ON REVERSE ENGINEERING.  Reverse engineering of Ancillary
+Software shall be governed by its respective Ancillary Software License. As
+for the remainder of the Product, You shall not modify, disassemble, reverse
+engineer, decompile, decrypt, or otherwise attempt to access or determine the
+source code of the Product without HP's prior written consent.  Where You have
+other statutory rights with regard to software, You shall provide HP with
+reasonably detailed information regarding any intended disassembly or
+decompilation of the Product prior to performing such disassembly or
+decompilation.  You shall not decrypt the Product unless necessary for the
+licensed Use of the Product.
+9.	RESERVATION OF RIGHTS.  HP, its third party suppliers, and Ancillary
+Software providers reserve all rights not expressly granted to You in this
+Agreement.
+10.	TERM AND TERMINATION.  You may exercise the rights of this Agreement
+and of the Ancillary Software Licenses for a period of time starting at Your
+acceptance of the terms and conditions of this Agreement and for so long as
+You meet such terms and conditions ("Term").  Notwithstanding the foregoing,
+HP may terminate Your right to Use the Product, upon notice, for Your failure
+to comply with any such term or condition.  Immediately upon termination, You
+shall remove, destroy, or return to HP all copies of the Product, including
+those copies of the Product that are merged into Your adaptations, except for
+individual pieces of data in Your database.  With HP's prior written consent,
+one copy of the Product may be retained, for archival purposes only, subsequent
+to termination.  You may terminate this Agreement at any time by returning or
+destroying the Product together with merged portions in any form.
+11.	CONFIDENTIAL COMPUTER SOFTWARE.  Valid license from HP required for
+possession, use, or copying.  Consistent with FAR 12.211 and 12.212, Commercial
+Computer Software, Computer Software Documentation, and Technical Data for
+Commercial Items are licensed to the U.S. Government under vendor's standard
+commercial license.
+12.	COMPLIANCE WITH LAW.  The Product and any associated hardware,
+software, technology or services may not be exported, reexported, transferred
+or downloaded to persons or entities listed on the U.S. Department of Commerce
+Denied Persons List, Entity List of proliferation concern, or on any U.S.
+Treasury Department Designated Nationals exclusion list, any country under
+U.S. economic embargo, or to parties directly or indirectly involved in the
+development or production of nuclear, chemical, biological weapons or in
+missile technology programs as specified in the U.S. Export Administration
+Regulations (15 CFR 744).  By accepting this Agreement You confirm that You
+are not (i) located in (or a national resident of) any country under U.S.
+economic embargo, (ii) identified on any U.S. Department of Commerce Denied
+Persons List, Entity List or Treasury Department Designated Nationals exclusion
+list, and (iii) directly or indirectly involved in the development or
+production of nuclear, chemical, biological weapons or in missile technology
+programs as specified in the U.S. Export Administration Regulations.
+13.	APPLICABLE LAW. This Agreement shall be construed in accordance with
+the laws of the State of Texas, without regard to conflict of laws principles.
+The United Nations Convention on Contracts for the International Sale of Goods
+is specifically disclaimed.  If the Product was acquired outside the United
+States, then local law may apply.
+14.	SEVERABILITY.  If any term or provision of this Agreement is determined
+to be illegal or unenforceable, the validity or enforceability of the remainder
+of the terms or provisions herein will remain valid and in full force and
+effect. Failure or delay in enforcing any right or provision of this Agreement
+shall not be deemed a waiver of such right or provision with respect to any
+subsequent breach. Provisions herein, which by their nature extend beyond the
+termination of the license in the Product, will remain in effect until
+fulfilled.
+15.	CONSENT TO USE OF DATA. You agree that HP may collect and use technical
+information that You provide in connection with Your Use and request for
+technical support of the Product from HP, however, HP will not use this
+information in a form that personally identifies You.
+16.	ASSIGNMENT.  You may not assign, sublicense or transfer this Agreement,
+the Product, or any rights or obligations hereunder without the prior written
+consent of HP.  Any such attempted assignment, sublicense, or transfer will be
+null and void, and in such event, HP may terminate this Agreement immediately.
+Notwithstanding the foregoing, You may assign this Agreement and the rights
+granted hereunder with the transfer of all or substantially all of Your
+business.  The right to assign or transfer Ancillary Software is governed by
+the terms and conditions of the Ancillary Software Licenses.
+17.	ENTIRE AGREEMENT.  This Agreement, including all Ancillary Software
+Licenses in the ANCILLARY SOFTWARE list, is the final, complete and exclusive
+agreement between You and HP relating to the Product, and supersedes any
+previous communications, representations, or agreements between the parties,
+whether oral or written, regarding the subject matter hereof.  Any additional
+or different terms and conditions not expressly set forth herein will not
+apply.  This Agreement may not be changed except by an amendment signed by an
+authorized representative of both You and HP.  To the extent the terms of any
+HP policies or programs for support services conflict with the terms of this
+Agreement, the terms of this Agreement shall control.
+18.	WARRANTY
+
+	a.	NO ACTIVATION KEY REQUIRED SOFTWARE - AS-IS WARRANTY STATEMENT:
+
+	DISCLAIMER.  TO THE EXTENT ALLOWED BY APPLICABLE LAW, THIS PRODUCT AND
+SUPPORT SERVICES, IF ANY, ARE PROVIDED TO YOU "AS IS" WITHOUT WARRANTIES OF
+ANY KIND, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED.  HP SPECIFICALLY
+DISCLAIMS ANY IMPLIED WARRANTIES OF ANY KIND, INCLUDING WITHOUT LIMITATION,
+WARRANTY OF MERCHANTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT, TITLE,
+ACCURACY OF INFORMATIONAL CONTENT, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY
+OR COMPLETENESS OF RESPONSES, RESULTS, OR WORKMANLIKE EFFORT, LACK OF VIRUSES,
+AND LACK OF NEGLIGENCE, ALL WITH REGARD TO THE PRODUCT, AND THE PROVISION OF
+OR FAILURE TO PROVIDE SUPPORT SERVICES.  IN ADDITION, WITHOUT LIMITATION,
+THERE IS NO WARRANTY OF QUIET ENJOYMENT, QUIET POSSESSION AND CORRESPONDENCE
+TO DESCRIPTION WITH REGARD TO THE PRODUCT.  YOU ASSUME THE ENTIRE RISK AS TO
+THE RESULTS AND PERFORMANCE OF THE PRODUCT.  NO ORAL OR WRITTEN INFORMATION OR
+ADVICE GIVEN BY HP, HP"S AUTHORIZED REPRESENTATIVES, OR ANY OTHER PARTY SHALL
+CREATE A WARRANTY OR AMEND THIS "AS IS" WARRANTY.  Some jurisdictions do not
+allow exclusions of implied warranties or conditions, so the above exclusion
+may not apply to You to the extent prohibited by such local laws. You may have
+other rights that vary from country to country, state to state, or province to
+province.
+
+	b.	ACTIVATION KEY REQUIRED SOFTWARE - LIMITED WARRANTY.
+
+HP warrants that the Product will perform substantially in accordance with the
+accompanying materials for a period of ninety (90) days from the date of
+purchase.  If an implied warranty or condition is created by Your
+state/jurisdiction and federal or state/provincial law prohibits disclaimer of
+it, You also have an implied warranty or condition, BUT ONLY AS TO DEFECTS FOR
+WHICH CLAIMS ARE MADE WITHIN NINETY (90) DAYS FROM THE DATE OF PURCHASE. AS TO
+ANY DEFECTS DISCOVERED FOR WHICH A CLAIM IS NOT MADE WITHIN THE NINETY-DAY
+PERIOD, THERE IS NO WARRANTY OR CONDITION OF ANY KIND.
+Some states/jurisdictions do not allow limitations on how long an implied
+warranty or condition lasts, so the above limitation may not apply to You.
+
+	DISCLAIMER.  The Limited Warranty that appears above is the only
+express warranty made to You and is provided in lieu of any other express
+warranties or implied warrantees (if any) created by any documentation,
+packaging or otherwise.  EXCEPT FOR THE LIMITED WARRANTY, AND TO THE MAXIMUM
+EXTENT PERMITTED BY APPLICABLE LAW, HP AND ITS SUPPLIERS PROVIDE THE PRODUCT
+AND SUPPORT SERVICES (IF ANY) "AS IS" AND WITH ALL FAULTS, AND HEREBY DISCLAIM
+ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS, IMPLIED OR STATUTORY,
+INCLUDING, BUT NOT LIMITED TO, ANY (IF ANY) IMPLIED WARRANTIES, DUTIES OR
+CONDITIONS OF MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE,
+SATISFACTORY QUALITY, NON-INFRINGEMENT OF TITLE, OF ACCURACY OR COMPLETENESS
+OF RESPONSES, OF RESULTS, OF WORKMANLIKE EFFORT, OF LACK OF VIRUSES, AND OF
+LACK OF NEGLIGENCE, ALL WITH REGARD TO THE PRODUCT, AND THE PROVISIONS OF OR
+FAILURE TO PROVIDE SUPPORT SERVICES.  ALSO, THERE IS NO WARRANTY OR CONDITION
+OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, CORRESPONDENCE TO DESCRIPTION,
+OR NON-INFRINGEMENT WITH REGARD TO THE PRODUCT.
+
+19.	LIMITATION OF LIABILITY.
+
+	a.	 FOR ALL SOFTWARE WHETHER OR NOT AN ACTIVATION KEY IS REQUIRED
+
+EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL HP OR ITS
+SUBSIDIARIES, AFFILIATES, DIRECTORS, OFFICERS, EMPLOYEES, AGENTS OR SUPPLIERS
+BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE,
+OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS) ARISING
+OUT OF THE USE, THE INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT,
+WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER
+OR NOT HP WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  THE PRODUCT IS NOT
+DESIGNED, MANUFACTURED OR INTENDED FOR USE IN THE PLANNING, CONSTRUCTION,
+MAINTENANCE, OR OPERATION OF A NUCLEAR FACILITY, AIRCRAFT NAVIGATION OR
+AIRCRAFT COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, LIFE SUPPORT MACHINES,
+OR WEAPONS SYSTEMS (COLLECTIVELY "HIGH RISK APPLICATIONS").  YOU ARE SOLELY
+LIABLE IF THE PRODUCT IS USED FOR HIGH RISK APPLICATIONS, AND YOU SHALL
+INDEMNIFY, DEFEND AND HOLD HP HARMLESS FROM ALL LOSS, DAMAGE, EXPENSE OR
+LIABILITY IN CONNECTION WITH SUCH USE.   YOU ASSUME THE ENTIRE RISK AS TO YOUR
+USE OF THE PRODUCT.  SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
+LIMITATION OF LIABILITY FOR INCIDENTIAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
+LIMITATION MAY NOT APPLY TO YOU TO THE EXTENT PROHIBITED BY SUCH LOCAL LAWS.
+
+	b.	FOR SOFTWARE REQUIRING AN ACTIVATION KEY
+
+Notwithstanding any damages that You might incur for any reason whatsoever
+(including, without limitation, all damages referenced above and all direct
+or general damages), the entire liability of HP and any of its suppliers under
+any provision of this EULA and Your exclusive remedy for all of the foregoing
+(except for any remedy of repair or replacement if elected by HP with respect
+to any breach of the Limited Warranty) shall be limited to the greater of the
+amount actually paid by You for the Product or U.S. $5.00.  The foregoing
+limitations, exclusions and disclaimers (including Warranty above) shall apply
+to the maximum extent permitted by applicable law, even if any remedy fails of
+its essential purpose.
+
+REV08/51/03	End User License Agreement
+
+Files: debian/*
+Copyright: Copyright (C) 2008-2012 Adam Cécile (Le_Vert)
+Copyright: Copyright (C) 2016-2018 Mario Fetka (geos_one)
+License: GPL-2.0+
+ This package is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+ .
+ This package is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>
+ .
+ On Debian systems, the complete text of the GNU General
+ Public License version 2 can be found in "/usr/share/common-licenses/GPL-2".
+
+

debian/dirs

@@ -0,0 +1,2 @@
+usr/sbin
+usr/lib/ssaducli

debian/docs

@@ -0,0 +1 @@
+i386/opt/smartstorageadmin/ssaducli/*.TXT

debian/rules

@@ -0,0 +1,52 @@
+#!/usr/bin/make -f
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+DESTDIR = $(CURDIR)/debian/ssaducli
+DEB_BUILD_ARCH  ?= $(shell dpkg-architecture -qDEB_BUILD_ARCH)
+
+build: build-arch build-indep
+build-arch:
+build-indep:
+
+clean:
+	dh_testdir
+	dh_testroot
+	dh_clean
+
+install:
+	dh_testdir
+	dh_testroot
+	dh_clean -k
+	dh_installdirs
+ifeq ($(DEB_BUILD_ARCH),i386)
+	install -D -m 755 $(CURDIR)/i386/opt/smartstorageadmin/ssaducli/bin/ssaducli \
+		$(DESTDIR)/usr/lib/ssaducli/ssaducli.real
+endif
+ifeq ($(DEB_BUILD_ARCH),amd64)
+	install -D -m 755 $(CURDIR)/amd64/opt/smartstorageadmin/ssaducli/bin/ssaducli \
+		$(DESTDIR)/usr/lib/ssaducli/ssaducli.real
+endif
+	install -D -m 755 $(CURDIR)/debian/ssaducli.wrapper \
+		$(DESTDIR)/usr/sbin/ssaducli
+
+binary-indep: build install
+binary-arch: build install
+	dh_testdir
+	dh_testroot
+	dh_installchangelogs debian/upstream_changelog
+	dh_installdocs
+	dh_installman
+	dh_link
+	dh_strip
+	dh_compress
+	dh_fixperms
+	dh_installdeb
+	dh_shlibdeps -l$(DESTDIR)/usr/lib/ssaducli/
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install

debian/source/format

@@ -0,0 +1 @@
+1.0

debian/ssaducli.wrapper

@@ -0,0 +1,6 @@
+#!/bin/sh
+#
+# This file is public domain.
+
+export LD_LIBRARY_PATH=/usr/lib/ssaducli:$LD_LIBRARY_PATH
+/usr/lib/ssaducli/ssaducli.real $@

debian/upstream_changelog

@@ -0,0 +1,336 @@
+Version: 9.10.22.0  (4 Jun 2012)
+  Enhancements
+    - Added support for the following controllers: 
+      * HP Dynamic Smart Array B120i
+      * HP Dynamic Smart Array B320i
+      * HP Smart Array P822
+    - Now officially supporting and providing native X64 versions in addition
+      to existing 32 bit versions
+    - Added new features requiring a valid SAAP 2.0 (Smart Array Advanced Pack) license key:
+      * Replace Array:
+        Allows the transfer of contents of an array to an existing empty
+        array or a new array. All logical drives from the source array will
+        be transferred. The original array will be deleted and its data
+        drives  will be freed as unassigned drives. The drive types at source
+        and destination arrays can be different. This allows moving data from
+        SATA to SAS, or SAS to SATA.  However, the drive types comprising the
+        array must still be of the same type.
+      * Heal Array:
+        Allows the replacement of failed or degraded physical drives in an
+        array with healthy physical drives. The original array and logical
+        drive numbering will be unaffected after the replacement. The
+        replacement physical drives must be of the same interface type (such
+        as SAS, SATA and etc.) as the original drives. The operation will be
+        available only if enough unassigned physical drives of the correct
+        size are available.
+ 
+Version: 9.0.24.0  (27 Mar 2012)
+  Enhancements
+    - Added support for the following controllers:
+      * HP Smart Array P222
+      * HP Smart Array P420
+      * HP Smart Array P421
+      * HP Smart Array P220i
+      * HP Smart Array P420i
+    - Added support for the following features/devices:
+      * Smart Array Advanced Pack 2.0 (SAAP 2.0):
+        SAAP 2.0 provides full SAAP 1.0 feature functionality with the
+        following additions:
+          - RAID 1/10 Advanced Data Mirroring (ADM)
+          - Moving and Deleting of Individual Logical Volumes
+          - Move operation now supports SATA to SAS, SAS to SATA
+          - Predictive Spare Activation
+          - > 128 physical drives
+          - SmartSSD Wear Gauge
+          - Updated Cache Ratio settings
+          - Additional Strip Sizes - 512, 1024 on supported controllers and
+            configurations
+          - Device Temperatures - Controllers, Capacitors, Cache Modules, and
+            Hard Drives
+          - Overall Performance improvements
+          - 3 TB physical drives
+
+Version: 8.75-12.0  (22 Jun 2011)
+  Enhancements
+    - *** New ***
+      Starting with versions 8.75.12.0, an Offline version of ACU is
+      available from http://www.hp.com/ that allows users to boot directly
+      into the configuration and maintenance utilities prior to any Host OS
+      loading or being installed.
+      .
+      This new deliverable of ACU is available for download through normal
+      software methods (such as searching by Server model, OS, or device) or
+      by searching for 'HP ProLiant Offline Array Configuration Utility'
+    - SmartSSD Wear Gauge
+      This feature is accessible through the ssdinfo command in ACUCLI
+      Example code:
+        <target> show ssdinfo [detail|summary]
+        Provides a summary for solid state drives for the specified controller(s)
+        The target can be any valid controller/device
+        controller slot=1 show sddinfo
+        controller all show ssdinfo
+        controller all show ssdinfo detail
+        controller all show ssdinfo summary
+    - Greater than 2.2 TB Hard Drives
+
+Version: 8.70-8.0  (11 Mar 2011)
+  Enhancements
+    - Improved speed of Diagnostic report generation
+    - Supported serial logs included in the zip file of the Diagnositc
+      reports, when applicable
+    - New options available during creation of logical drive size
+    - Now showing current and max temperatures for physical drives
+    - Support for failed array controllers.  The "ctrl all show" command will
+      list any locked up controllers along with valid controllers. For failed
+      controllers, a message will display explaining its state along with a
+      lockup code, if applicable
+    - Support for "-h" and "-help" commandline option
+    - HPACUSCRIPTING updates:
+      * Will not display array accelerator info in capture files for
+        controllers which do not have cache or the cache is not configurable.
+        Attempting to set the array accelerator on these controllers will
+        result in a warning message (not an error)
+      * Support for logical drive command "Size=MAXMBR". This option creates
+        the largest possible volume in an array with the maximum size
+        constrained by the limits of the 32bit MBR
+      * New keyword, SIZEBLOCKS. Input scripts can now specify size as before
+        using SIZE (size in MB) or SIZEBLOCKS (size in 512 byte blocks) but
+        not both
+      * Now displays the disk interface type in the comment section for physical
+        disks.
+
+Version: 8.61-1.0  (8 Feb 2011)
+  Fixes
+    - In version 8.60-8.0 of HPACUCLI, using the "show or detail commands" on
+      any target that includes physical drives can cause the application to
+      exit if one or more of the included physical drives are in a failed
+      state.
+      This release, 8.61-1.0, corrects this problem and allows the command to
+      complete successfully.
+
+Version: 8.60-8.0  (10 Sep 2010)
+  Enhancements
+    - Overall Performance improvements
+      * HPACUCLI as well as in HPACUSCRIPTING 
+    - Surface Scan Analysis enhancements
+      * Disable
+      * High
+      * Idle
+
+Version: 8.50-6.0  (28 May 2010)
+  Enhancements
+    - Overall Performance improvements
+    - Physical drives in a SMART state are allowed to be used at user's
+      discretion
+    - Diagnostic Report additions:
+      * Parity group information for RAID 50 and RAID 60 logical drives
+      * Information for SEP devices and Expanders
+      * Updated Storage Enclosure names
+    - Applicable only with the appropriate SAAP License Key installed:
+      * The Move Array operation now allows the user to move an array to
+        physical drives that are smaller than the original physical drives,
+        provided that all the data in the existing logical drives will fit
+        into the new array
+          * The new drive set must have the same number of physical drives as
+            the existing drive set
+    - Added SEP devices and Expanders to "ctrl slot=X show config" and "ctrl
+      slot=X show config detail" commands
+    - Added an "OS Status" for logical drives to indicate if it is "locked"
+      by the OS
+    - Added display of Hardware Revision info for SAS Expander boards
+      * "<target> enclosure all show detail" should be used in order to see
+        the field displayed
+    - Added support for being able to run ACUCLI in non-interactive mode for
+      read-only commands (show) even if ACU is running. For example:
+        # hpacucli ctrl all show
+        # hpacucli ctrl slot=1 pd all show status
+    - Added "exitonerror" feature which allows the application to exit upon
+      encountering any error during execution of a command. This feature is
+      useful for scripts invoking ACUCLI and the feature will allow scripts
+      to know that an error has occurred.
+        * The setting can also be invoked from the console as an application switch
+          Example:  "hpacucli -exitonerror < myscript.txt"
+        * set [exitonerror=enable|disable]
+          Allows a script to decide whether an error encountered during execution
+        * show exitonerror
+          Displays the current exitonerror setting 
+     - Added enclosure show support
+       * enclosure [ all | port:box | serialnumber=xxxx ] show [ detail |
+         status]
+         Outputs the storage enclosure information The target can be any
+         valid storage enclosure
+         Examples:
+           * controller slot=5 enclosure all show
+           * controller slot=5 enclosure 4E:1 show detail
+           * controller slot=5 enclosure serialnumber=UAB123456 show status
+    - Added support for the 'show' command to display devices in a logical or
+      physical format similar to the support in ACU (GUI) 
+      * set [view=logical|physical]
+        - Allows the user to select whether certain show commands display the
+          output using a logical or physical view
+        - Logical view displays devices using their association with arrays
+        - Physical view displays the devices such as physical drives
+          according to their relationship with their storage enclosures
+        - The default value is logical view
+      * show view
+        - Displays the current view setting.
+      * Examples:
+        set view=physical
+        show view
+    - Added the capability to run multiple commands in command line mode
+      (non-interactive)
+      * The semicolon (";") is used as a delimiter between commands
+      * For example:
+        On LINUX, the semicolon must be escaped or in quotes
+        hpacucli "ctrl slot=1 show; ctrl slot=1 modify
+        drivewritecache=enable; ctrl slot=1 show"
+    - HPACUSCRIPTING Additions:
+      * Now shows an expanded usage message when invalid command line
+        arguments are provided
+      * Added feature to allow RAID=RAID1 for >2 disk mirrors. This 
+        allows backwards compatibility with "old" cpqacuxe scripting. Capture
+        will still output correct RAID level
+      * Added AUTO as a valid option for QUEUEDEPTH
+      * Overall Performance improvements
+      * Added Controller=FIRST support. Controllers are now sorted in capture
+        files in slot ascending order
+      * Added additional controller information to errors and warnings to
+        better identify where problems occur in an input file
+
+Version: 8.40-4.0  (25 Feb 2010)
+  Enhancements
+    - Support for Smart Array P812
+ 
+Version: 8.35-7.0  (28 Sep 2009)
+  Enhancements
+    - Changes for HPACUCLI 8.35.X.X:
+      * Now supports command line history and tab completion
+ 
+Version: 8.30-5.0  (14 Sep 2009)
+  Enhancements
+    - Changes for HPACUCLI 8.30.X.X:
+      * Enclosure View
+ 
+Version: 8.28-13.0  (6 May 2009)
+  Enhancements
+    - Changes for HPACUCLI 8.28.X.X:
+      * Command Line Diagnostics (ADUCLI) is now integrated with HPACUCLI
+      * Scripting for captures and inputs is now intergrated with HPACUCLI
+        This support was previously delivered with ACU
+        The scripting command has changed from cpqacuxe to hpacuscripting
+
+Version: 8.25.5  (19 Feb 2009)
+  Enhancements
+    - Added Support for the following Controllers:
+      * Smart Array P212
+      * Smart Array P212 ZMR
+      * Smart Array P410
+      * Smart Array P410 ZMR
+      * Smart Array P410i
+      * Smart Array P410i ZMR
+      * Smart Array P411
+      * Smart Array P411 ZMR
+      * Smart Array B110i SATA RAID
+   - Additionally, added support for Advanced Pack
+
+Version: 8.20.18  (23 Jan 2009)
+  Enhancements
+    - Added Support for the following Controllers:
+      * Smart Array P212
+      * Smart Array P212 ZMR
+      * Smart Array P410
+      * Smart Array P410 ZMR
+      * Smart Array P411
+      * Smart Array P411 ZMR
+    - Additionally, added support for Smart Array Advanced Pack
+
+Version: 8.10.2  (6 Jun 2008)
+  Fixes
+    - Fixed an issue related to an incorrect Background Parity Initialization
+      status being displayed for RAID 5 and RAID 6 Logical Drives
+
+Version: 8.0.14  (26 Feb 2008)
+  Enhancements
+    - Added Dual Domain Support for the HP Smart Array P800 Controller
+    - Added 512K Stripe Size for RAID 5 (only on the following controllers
+      with minimum FW 5.00):
+        * Smart Array E500
+        * Smart Array P400/400i
+        * Smart Array P800
+
+Version: 7.85.18  (24 Jul 2007)
+  Enhancements
+    - Enabled drive write cache for all SAS controllers
+
+Version: 7.80.6  (27 Apr 2007)
+  Enhancements
+    - Support SATA NCQ status.
+
+Version: 7.73.1  (26 Mar 2007)
+  Fixes
+    - The ACU CLI utility was modified to display a message informing
+      customers that a firmware update is required if firmware version 2.04
+      is detected on a Smart Array P400, P400i, or P800 controller.
+  Enhancements
+    - Added support for the Smart Array E500 controller.
+
+Version: 7.70.12  (14 Dec 2006)
+  Enhancements
+    - Changed default RAID5 stripe size to 64K for MSA1000/1500
+    - Added new stripe-sizes (128KB and 256KB) for the P400, P600 and P800
+      controllers to allow migration of volumes from MSA20 to SAS
+      controllers.
+
+Version: 7.60.18  (25 Sep 2006)
+  Enhancements
+    - CLI now has two new show command parameters -> show [config] [detail].
+      See help for usage.
+
+Version: 7.50.18  (13 Apr 2006)
+  Enhancements
+    - Added support for the following:
+      * Smart Array P400 Controller
+      * Smart Array P400i Controller
+      * Smart Array E200 Controller
+      * Smart Array E200i Controller
+    - Added support for over 2 TB on controllers that support it.
+    - Array accelerator options are disabled on controllers with zero memory.
+    - When using create, add drives, add spares, and remove spares, the user
+      can now specify drive ranges. Instead of "1:1,1:2,1:3,1:4" the user can
+      type "1:1-1:4".
+    - CLI now supports targeting a controller via the chassis serial number.
+      See help for additional usage information.
+
+Version: 7.40.7  (9 Sep 2005)
+  Enhancements
+    - Updated so RAID ADG is now referred to as RAID 6 (ADG).
+
+Version: 7.31.1  (24 Jun 2005)
+  Fixes
+    - Fixes a problem where specifying an array using the “drives” parameter
+      on the create logical drive operation could incorrectly result in
+      deletion of that array if the create operation fails.
+
+Version: 7.30.9  (4 May 2005)
+  Enhancements
+    - Added support for the following:
+      * Smart Array P600 controller.
+    - Active-Active on redundant controllers that support it.
+
+Version: 7.21.17  (28 Feb 2005)
+  Enhancements
+    - Added support for Red Hat Enterprise Linux 4.
+
+Version: 7.20.16  (14 Feb 2005)
+  Fixes
+    - Resolved issue where data in cache was found during reboot.
+  Enhancements
+    - Added support for the standbycontroller=disable command.
+
+Version: 7.17.1  (11 Dec 2004)
+  Fixes
+    - Corrected ACU CLI caches status messages to better correspond with ACU.
+
+Version: 7.15.19  (2 Sep 2004)
+  Enhancements
+    - Initial release.

files.diz

@@ -0,0 +1,2 @@
+amd64!ssaducli!5.10.44.0!ssaducli-3.40-3.0.x86_64.rpm!https://downloads.linux.hpe.com/SDR/repo/mcp/centos/7/x86_64/current/ssaducli-5.10-44.0.x86_64.rpm!f6268fa734e53431ebe274998a5999ef
+i386!ssaducli!5.10.44.0!ssaducli-2.60-18.0.i386.rpm!https://downloads.linux.hpe.com/SDR/repo/mcp/CentOS/6/i686/current/ssaducli-2.60-18.0.i386.rpm!6aab9ee65a0f033242217027fa05ae33