add debian

debian/README

@@ -0,0 +1,227 @@
+
+******************************************************************************
+                                 LsiUtil_ReadMe.txt
+******************************************************************************
+
+This file presents general information about the LsiUtil utility for Windows,
+Linux and Solaris.  
+
+This file is divided into the following sections:
+   Introduction
+       Features
+       LSI Logic Devices Supported
+   Description
+       Menu Operation
+       Command Line Operation
+
+
+
+1.0 Introduction
+................
+
+
+LsiUtil is a firmware download and diagnostic utility that can be used with
+Windows, Linux, Solaris and DOS environments.  
+
+1.1 Features
+............
+
+LsiUtil supports:
+
+
+o  All SCSI, SAS and Fiobre Channel Host Adapters from LSI NSPG.
+o  Identifies and updates the firmware or BIOS images. 
+o  Allows Flash to be completely erased.
+o  Allows configuration of all HBA and firmware parameters.
+o  Provides system level debug tools. 
+o  Supports command line execution.
+
+1.2 LSI Logic FC Devices Supported
+...................................
+
+o  All LSI MPT Fusion (tm) SCSI chips and HBAs
+o  All LSI Fibre Channel chips and HBAs
+o  All LSI SAS chips and HBAs
+
+
+2.0 Description 
+...............
+
+LsiUtil supports updating the LSI Logic Fusion-MPT (TM) based Firmware 
+and/or BIOS, for chips and HBAs that use FLASH. 
+
+The utility is supported with binaries in several OS environments:
+
+Windows:  lsiutil.exe 
+Linux: lsiutil 
+Solaris: lsiutil
+DOS: lsiutil.exe 
+
+The utility requires the LSI host adapter driver to be installed and 
+loaded. 
+
+To run LsiUtil: 
+
+Copy lsiutil to C:\  or /usr/sbin/ Windows or Linux respectively.   
+
+Open and command prompt. 
+Command prompt C:\>. 
+Type lsiutil and press Enter.  
+
+2.1 Operation
+.............
+
+The main window provides a selction of chip/HBA ports. Dual channel cards will 
+have two entries (chips) displayed on this screen.  Since both channels of a
+dual channel board share a flash part, only one of the paths needs to be 
+chosen.  However, no harm will be done if separate updates are done through 
+both.  This screen appears as:
+
+
+C:\>lsiutil
+
+LSI Logic MPT Configuration Utility, Version 1.52, September 7, 2007
+
+6 MPT Ports found
+
+     Port Name         Chip Vendor/Type/Rev    MPT Rev  Firmware Rev  IOC
+ 1.  Scsi Port 0       LSI Logic 53C1030 B2      102      01032700     0
+ 2.  Scsi Port 1       LSI Logic 53C1030 B2      102      01032700     1
+ 3.  Scsi Port 5       LSI Logic FC949E A1       105      01031400     0
+ 4.  Scsi Port 6       LSI Logic FC949E A1       105      01031400     1
+ 5.  Scsi Port 7       LSI Logic FC919X A0       103      01021700     0
+ 6.  Scsi Port 8       LSI Logic SAS1068 B0      105      01160000     0
+
+Select a device:  [1-6 or 0 to quit] 0
+
+    
+Once a chip has been chosen, another menu list will be displayed as follows:
+
+ 1.  Identify firmware, BIOS, and/or FCode
+ 2.  Download firmware (update the FLASH)
+ 4.  Download/erase BIOS and/or FCode (update the FLASH)
+ 8.  Scan for devices
+10.  Change IOC settings (interrupt coalescing, EEDP)
+13.  Change FC Port settings
+16.  Display logged-in devices
+20.  Diagnostics
+21.  RAID actions
+22.  Reset bus
+23.  Reset target
+30.  Beacon on
+31.  Beacon off
+42.  Display operating system names for devices
+43.  Diagnostic Buffer actions
+60.  Show non-default settings
+61.  Restore default settings
+69.  Show board manufacturing information
+98.  Reset FC link
+99.  Reset port
+ e   Enable expert mode in menus
+ p   Enable paged mode in menus
+ w   Enable logging
+
+
+Main menu, select an option:  [1-99 or e for expert or 0 to quit]
+    
+
+- The Identify firmware, BIOS, and/or FCode option displays the version 
+  number of the current Fusion-MPT Firmware or the Fusion-MPT BIOS residing on 
+  the adapter.  If multiple BIOS images are present (Fusion-MPT BIOS w/EFI BSD 
+  or Fusion-MPT BIOS w/FCode), this option will all versions.
+
+- The Download firmware option prompts for a file name to download. 
+  
+  Example:  "Enter firmware filename: it_1030.fw"
+  
+  The firmware file to download may be in the same directory as the lsiutil 
+  executable, or a full pathname can be provided. 
+
+  Example:  Enter firmware filename: 
+  C:\Fusion-MPT_IT_FW10327_BIOS_50703pt_FLASH_10304\it_1030.fw
+
+- The Download BIOS and/or FCode option also prompts for a file name to download.
+
+  Example:
+
+  "Enter x86 BIOS filename: mptbios.rom"  
+  "Enter FCode filename: lsi1030f.rom"
+  "Enter EFI BIOS filename:lsimpt.rom"
+
+  If no file is entered and there is currently a version on the card, the current
+  BIOS version will be displayed.
+
+  Example:  MPTBIOS-x.xx.xx (xxxx.xx.xx)
+  Do you want to preserve the current x86 BIOS?  [Yes or No, default is Yes]
+
+  
+3.0 Command Line Operation
+..........................
+
+The following command line options are supported by this utility and can be 
+used to create an automated process to perform the utility's operations. When no 
+command line options are specified, the interactive (menu) is displayed.
+
+      -e                Turn on Expert Mode (more menu options).
+      -w, -ww, -www     Log internal operations to lsiutil.log, for debug.
+      -y                Answer yes to yes/no questions whose default is yes.
+      -n                Answer no to yes/no questions whose default is no.
+      -j type[,type]    Include just ports of type 'type' (FC, SCSI, SAS).
+      -x                Concatenate SAS firmware and NVDATA files.
+
+Display Options
+
+usage:  lsiutil [ -p portNumber ] [ -u ][ -s ] [ -d ] [ -i ] [ -b ]
+      -p portNumber     Specify the port number to operate on.
+                        If not specified, all ports are used.
+      -u                Use untagged, rather than tagged, SCSI commands.
+      -s                Scan for and display all targets.
+      -d                Dump all config pages.
+      -i                Display port settings.
+      -b                Show board manufacturing information.
+      -m freq[,time]    Monitor port performance, updating the display
+                        every 'freq' seconds, for 'time' seconds.
+
+Examples:
+
+1. to display the port settings and targets for port 1:
+       lsiutil -p 1 -i -s
+2. to display the targets found on all known ports:
+       lsiutil -s
+
+Operational Options
+
+usage:  lsiutil -p portNumber [ -l linkSpeed ] [ -t topology ]
+                              [ -c timeout,depth ] [ -r ]
+      -p portNumber     Specify the port number to operate on.
+                        Required parameter for operational options.
+      -l linkSpeed      Set link speed.  Valid options for linkSpeed are:
+                            'a'     Auto link speed negotiation
+                            '1'     Force 1Gb link speed
+                            '2'     Force 2Gb link speed
+                            '4'     Force 4Gb link speed
+      -t topology       Set topology.  Valid options for topology are:
+                            'a'     Auto topology negotiation
+                            '1'     Force NL_Port topology
+                            '2'     Force N_Port topology
+      -c timeout,depth  Set interrupt coalescing values.
+                        Timeout is a value in microseconds between
+                        1 and 1000.  Depth is a value between 1 and 128.
+                        Setting either or both values to zero will
+                        disable interrupt coalescing for that port.
+      -r                Perform a chip reset on the given port.
+      -z                Perform an FC link reset on the given port.
+NOTE:  In order for linkSpeed, topology, or interrupt coalescing
+       settings to take effect, a chip reset is necessary.
+
+Examples:
+
+1. to force linkspeed to 1Gb on port 2:
+       lsiutil -p 2 -l 1
+2. to set interrupt coalescing to a timeout of 200ms with
+   a depth of 9 and to force N_Port topology on port 1:
+       lsiutil -p 1 -c 200,9 -t 2
+
+
+
+

debian/changelog

@@ -0,0 +1,11 @@
+lsiutil (1.60-2) unstable; urgency=medium
+
+  * Invert uudecode file and args to get it working with newer version. 
+
+ -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Wed, 10 Feb 2016 10:37:59 +0100
+
+lsiutil (1.60-1) unstable; urgency=low
+
+  * Initial release.
+
+ -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Sun, 01 Feb 2009 00:41:44 +0100

debian/compat

@@ -0,0 +1 @@
+5

debian/control

@@ -0,0 +1,14 @@
+Source: lsiutil
+Section: admin
+Priority: optional
+Maintainer: Adam Cécile (Le_Vert) <gandalf@le-vert.net>
+Build-Depends: debhelper (>= 5), sharutils
+Standards-Version: 3.8.0
+Homepage: http://www.lsi.com
+
+Package: lsiutil
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: LSI Logic Fusion MPT Command Line Interface management tool
+ This packages contains the "lsiutil" command line tool to manage LSI Fusion
+ MPT RAID HBAs.

debian/copyright

@@ -0,0 +1,22 @@
+This package was debianized by Adam Cécile (Le_Vert) <gandalf@le-vert.net> on
+Sun, 01 Feb 2009 00:41:44 +0100.
+
+It was downloaded from ftp://ftp.lsil.com/HostAdapterDrivers/linux/lsiutil
+and http://www.lsi.com/DistributionSystem/AssetDocument/support/downloads/
+hbas/fibre_channel/hardware_drivers/LSIUtil Kit_1.60.zip (changes.txt)
+
+Upstream Author:
+
+    LSI Corporation
+
+Copyright:
+    
+    Copyright (C) LSI Corporation
+
+License:
+
+    Unspecified. Probably under a proprietary license but sources are
+    available.
+
+The Debian packaging is (C) 2009, Adam Cécile (Le_Vert) <gandalf@le-vert.net>
+and is licensed under the GPL, see `/usr/share/common-licenses/GPL'.

debian/dirs

@@ -0,0 +1 @@
+usr/sbin

debian/docs

@@ -0,0 +1,2 @@
+debian/user_guide.pdf
+debian/README

debian/rules

@@ -0,0 +1,40 @@
+#!/usr/bin/make -f
+
+DESTDIR = $(CURDIR)/debian/lsiutil
+
+debian/user_guide.pdf:
+	uudecode -o $@ $@.uu
+
+build: debian/user_guide.pdf
+
+clean: 
+	dh_testdir
+	dh_testroot
+	dh_clean
+	rm -f debian/user_guide.pdf
+
+install: build
+	dh_testdir
+	dh_testroot
+	dh_clean -k 
+	dh_installdirs
+	$(CC) source/lsiutil.c -o $(DESTDIR)/usr/sbin/lsiutil
+
+binary-indep: build install
+binary-arch: build install
+	dh_testdir
+	dh_testroot
+	dh_installchangelogs changes.txt 
+	dh_installdocs
+	dh_link
+	dh_strip
+	dh_compress -Xusr/share/doc/lsiutil/user_guide.pdf
+	dh_fixperms
+	dh_installdeb
+	dh_shlibdeps
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install