29 changed files with 1928 additions and 1 deletions
--- a/amd64/opt/hp/hpssaducli/README.TXT
+++ b/amd64/opt/hp/hpssaducli/README.TXT
@ -0,0 +1,165 @@
 HPE Smart Storage Administrator Diagnostics and SmartSSD Wear Gauge Utility CLI
 Version 2.40-13.0
 11/4/2015
 Description
 -----------
  The HPE Smart Storage Administrator Diagnostics and SmartSSD Wear Gauge 
  Utility CLI (HPSSADUCLI) is a command line application that creates a 
  report of all HPE Storage controllers and disk drives. This report 
  provides vital information to HPE service personnel to assist in 
  identifying faults or conditions that may require attention. 
  The utility can also generate SmartSSD Wear Gauge reports.  These 
  reports contain wear (usage) information for all SmartSSD devices 
  attached to the system.
 * All other product names mentioned herein may be trademarks of their 
  respective companies.
 Supported Operating Systems and Platforms
 -----------------------------------------
 Linux 32-bit components:  
   SuSE Linux Enterprise Server 10
   SuSE Linux Enterprise Server 11
   Red Hat Enterprise Linux 5
   Red Hat Enterprise Linux 6
   Red Hat Enterprise Linux 7
 Linux 64-bit components:
   SuSE Linux Enterprise Server 10 (x86_64)
   SuSE Linux Enterprise Server 11 (x86_64)
   Red Hat Enterprise Linux 5 (x86_64)
   Red Hat Enterprise Linux 6 (x86_64)
   Red Hat Enterprise Linux 7 (x86_64)
   Debian Sarge 64 bit
   Debian Etch (amd64)
   NOTE: For Red Hat Enterprise Linux 7.1 the sg driver must be manually 
         added so that it is loaded at boot time. Without the sg driver being
         loaded, devices or controllers may not be discovered.
         Here is a recommended way to do this:
            sudo echo sg > /etc/modules-load.d/sg.conf
            sudo rebo
 * Any platform that requires the CCISS driver should use version 3.6.28 or newer.
 These drivers are available from http://www.hp.com.
 Supported Controllers
 ---------------------
  Dynamic Smart Array B110i SATA RAID
  Smart Array P212 Controller
  Smart Array P410 Controller
  Smart Array P410i Controller
  Smart Array P411 Controller
  Smart Array P711m Controller
  Smart Array P712m Controller
  Smart Array P812 Controller
  Dynamic Smart Array B120i
  Dynamic Smart Array B320i
  Smart Array P220i Controller
  Smart Array P222 Controller
  Smart Array P420 Controller
  Smart Array P420i Controller
  Smart Array P421 Controller
  Smart Array P721m Controller
  Smart Array P822 Controller
  Smart Array P230i Controller
  Smart Array P430 Controller
  Smart Array P431 Controller
  Smart Array P530 Controller
  Smart Array P531 Controller
  Smart Array P731m Controller
  Smart Array P830 Controller
  Smart Array P830i Controller
  Dynamic Smart Array B140i
  Smart HBA H240 Controller
  Smart HBA H240ar Controller
  Smart HBA H241 Controller
  Smart HBA H244br Controller
  Smart Array P244br Controller
  Smart Array P246br Controller
  Smart Array P440 Controller
  Smart Array P440ar Controller
  Smart Array P441 Controller
  Smart Array P741m Controller
  Smart Array P840 Controller
  Smart Array P840ar Controller
  Smart Array P841 Controller
 Installing & Running the HPE Smart Storage Administrator
 --------------------------------------------------------------
  Installation:
    HPSSADUCLI is distributed using Red Hat Package Manager (RPM) packages
    If there is an older version of HPSSADUCLI installed on the system, please
       use "rpm -e hpssaducli" to remove it first. Use "rpm -i <file name>" to
       install the application.
    Please type "man rpm" for other details regarding RPM.
    The software resides in /opt/hp/hpssaducli and the executable 
    name is hpssaducli which is located in /usr/sbin.
    When attempting to run HPSSADUCLI on any HP-supported version of Linux, it is
    highly recommended that you install the latest version of the HPE ProLiant
    Smart Array Controller driver for your intended Linux operating system.
    Drivers may be obtained by clicking on "Support & Drivers" from HP's
    website at:  http://www.hp.com
 Running HPSSADUCLI
 ------------------------------------------------------------------------
 To run the command-line application:    
   Open a command prompt and change directory (cd) to the location
      where HPSSADUCLI is installed.  This is commonly /opt/hp/hpssaducli/bin. 
   To generate a diagnostic report, enter the following command:
       hpssaducli -f adu-report.zip
   To generate a SmartSSD Wear gauge report, enter the following command:
       hpssaducli -ssd -f ssd-report.zip
   More options can be found by "hpssaducli -help".
 Additional Notes
 ----------------
 Both the diagnostic and SmartSSD wear gauge reports are generated in compressed
  (ZIP) format.
 The diagnostic report output archive contains the following files:
   * ADUReport.txt          => Diagnostic report in text format
   * ADUReport.xml          => Diagnostic report in XML format
   * ADUReport.htm          => HTML viewer for diagnostic report
   * report.checksum        => checksum file
   * SlotX.txt (SlotX.old)  => Controller serial output log
   Note: The serial output log file(s) are only available if the "HPE Storage
         Agent" daemon is installed and running.
   To view the diagnostic report in a browser, extract the ADUReport.htm. Open
      ADUReport.htm in the browser.
 The SmartSSD wear gauge report output archive contains the following files:
   * SmartSSDWearGaugeReport.txt => SmartSSD wear gauge report in text format
   * SmartSSDWearGaugeReport.js  => SmartSSD wear gauge report in JSON format
   * SmartSSDWearGaugeReport.htm => HTML viewer for the JSON wear gauge report
   To view the SmartSSD wear gauge report in a browser, extract the
   SmartSSDWearGaugeReport.js, SmartSSDWearGaugeReport.htm files to a
   directory (both files must reside in the same directory).  Open
   SmartSSDWearGaugeReport.htm in the browser.
 Known Issues
 ------------
 N/A
 Feedback
 --------
 * For support for HPSSADUCLI or Smart Array controllers, please visit the web at 
    http://support.hp.com.
--- a/amd64/opt/hp/hpssaducli/bin/hpssaducli
+++ b/amd64/opt/hp/hpssaducli/bin/hpssaducli
--- a/amd64/opt/hp/hpssaducli/bin/hpssaduesxi
+++ b/amd64/opt/hp/hpssaducli/bin/hpssaduesxi
--- a/amd64/opt/hp/hpssaducli/bin/upgrade.txt
+++ b/amd64/opt/hp/hpssaducli/bin/upgrade.txt
--- a/amd64/opt/hp/hpssaducli/hpssadu.license
+++ b/amd64/opt/hp/hpssaducli/hpssadu.license
@ -0,0 +1,338 @@
 		PROLIANT ESSENTIALS SOFTWARE
 		END USER LICENSE AGREEMENT
 PLEASE READ THIS END USER LICENSE AGREEMENT ("AGREEMENT") CAREFULLY.  THIS
 AGREEMENT IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR SINGLE
 ENTITY) ("YOU") AND HEWLETT-PACKARD COMPANY ("HP").  BY CLICKING THE "AGREE"
 BUTTON BELOW, COPYING, INSTALLING, OR OTHERWISE USING THE SOFTWARE,
 (i) YOU DO SO WITH THE INTENT TO ELECTRONICALLY "EXECUTE" THIS AGREEMENT, AND
 (ii) YOU AGREE TO BE BOUND BY AND COMPLY WITH THE FOLLOWING TERMS AND
 CONDITIONS, INCLUDING THE WARRANTY STATEMENT, AS WELL AS ANY TERMS AND
 CONDITIONS CONTAINED IN THE "ANCILLARY SOFTWARE" LIST.
 IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT,
 (A) IF THIS AGREEMENT IS DISPLAYED ELECTRONICALLY, YOU MAY INDICATE REJECTION
    OF THIS AGREEMENT BY CLICKING THE "DISAGREE" BUTTON;
 (B) YOU SHALL NOT INSTALL THE SOFTWARE; AND
 (C) HP DOES NOT GRANT YOU ANY RIGHTS TO USE THE SOFTWARE.
 NOTWITHSTANDING THE FOREGOING, INSTALLING OR OTHERWISE USING THE SOFTWARE
 INDICATES YOUR ACCEPTANCE OF THE TERMS AND CONDITIONS OF THIS AGREEMENT.
 IF YOU PURCHASED THE SOFTWARE, YOU MAY RETURN THE SOFTWARE TO THE PLACE OF
 PURCHASE FOR A FULL REFUND.
 THE SOFTWARE PROVIDED HEREIN, IS PROVIDED BY HP AND BY THIRD PARTIES, INCLUDING
 THE OPEN SOURCE COMMUNITY ("ANCILLARY SOFTWARE").  USE OF THE HP SOFTWARE, THE
 ANCILLARY SOFTWARE, ACCOMPANYING PRINTED MATERIALS, AND THE "ONLINE" OR
 ELECTRONIC DOCUMENTATION (COLLECTIVELY THE "PRODUCT") IS CONDITIONED UPON AND
 LIMITED BY THE FOLLOWING TERMS AND CONDITIONS, INCLUDING THE "AS IS WARRANTY
 STATEMENT" AND THE TERMS AND CONDITIONS OF THE ANCILLARY SOFTWARE LICENSE
 AGREEMENTS ("ANCILLARY SOFTWARE LICENSES").
 USE OF ANCILLARY SOFTWARE SHALL BE GOVERNED BY THE ANCILLARY SOFTWARE LICENSE,
 EXCEPT THAT THE DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITIES
 PROVISIONS CONTAINED IN THE "AS-IS WARRANTY STATEMENT" OF THIS AGREEMENT SHALL
 ALSO APPLY TO SUCH ANCILLARY SOFTWARE.  HP HAS IDENTIFIED ANCILLARY SOFTWARE
 BY EITHER NOTING THE ANCILLARY SOFTWARE PROVIDER"S OWNERSHIP WITHIN EACH
 ANCILLARY SOFTWARE PROGRAM FILE AND/OR BY PROVIDING LICENSING INFORMATION IN
 THE "ANCILLARY SOFTWARE" LIST. BY ACCEPTING THE TERMS AND CONDITIONS OF THIS
 AGREEMENT, YOU ARE ALSO ACCEPTING THE TERMS AND CONDITIONS OF EACH ANCILLARY
 SOFTWARE LICENSE IN THE ANCILLARY SOFTWARE LIST.
 IF AND ONLY IF THE PRODUCT INCLUDES SOFTWARE LICENSED UNDER THE GNU GENERAL
 PUBLIC LICENSE ("GPL SOFTWARE"), YOU MAY OBTAIN A COMPLETE MACHINE-READABLE
 COPY OF THE GPL SOFTWARE SOURCE CODE ("GPL SOURCE CODE") BY DOWNLOAD FROM A
 SITE SPECIFIED IN THE FOLLOWING HP WEBSITE:
 HTTP://H18004.WWW1.HP.COM/PRODUCTS/SERVERS/PROLIANTESSENTIALS/VALUEPACK/LICENSING.HTML.
 UPON YOUR WRITTEN REQUEST, HP WILL PROVIDE, FOR A FEE COVERING THE COST OF
 DISTRIBUTION, A COMPLETE MACHINE-READABLE COPY OF THE GPL SOURCE CODE, BY MAIL,
 TO YOU.  INFORMATION ABOUT HOW TO MAKE A WRITTEN REQUEST FOR GPL SOURCE CODE
 MAY BE FOUND AT THE FOLLOWING WEBSITE:
 HTTP://H18004.WWW1.HP.COM/PRODUCTS/SERVERS/PROLIANTESSENTIALS/VALUEPACK/LICENSING.HTML .
 LICENSE TERMS
 SUBJECT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT AND ANY RIGHTS,
 LIMITATIONS AND OBLIGATIONS SET FORTH IN THE ANCILLARY SOFTWARE LICENSES:
 1.	LICENSE GRANT
 a.	IF SOFTWARE DOES NOT REQUIRE AN ACTIVATION KEY.  If the Software does
 not require an Activation Key and provided that You comply with all the terms
 and conditions of this Agreement, HP grants You a non-exclusive,
 non-transferable (except as provided in Section 16), worldwide (except for the
 countries referenced  in Section 12) license under HP's copyrights, to install,
 copy on as many computers as you need for your business, use, execute, make
 archival or backup copies, and display ("Use") the object code version of the
 Product on the computer(s) on which this Product is installed and in the
 operating environment as identified by HP in the accompanying materials.
 b.	IF SOFTWARE REQUIRES AN ACTIVATION KEY.  If the Software requires an
 Activation Key, and provided that You comply with all terms and conditions of
 this Agreement, then depending upon the specific hardware configuration You
 employ, HP grants You the following license  ("License Type") and rights:
 	Authorized Copies.  You are licensed to install, make Authorized Copies
 of (as defined in this section), execute, and display ("Use") the object code
 version of the Product on an equivalent number of Computers, Host/Client Pairs,
 Computer Nodes, or Clustered Computers (as defined in the table below) as you
 have Authorized Copies.  Authorized Copies is defined as the number of copies
 that you have paid for as stated in the invoice or comparable document
 evidencing an authorized quantity.
 LICENSE TYPE 	SOFTWARE INSTALLS TO:		LICENSED RIGHTS
 		(hardware configuration)
 ------------------------------------------------------------------------------
 Computer	A computer 			You have a right to install
 						and Use the Product on a single
 						computer. The installed copy
 						may not be transferred to or
 						used on any other computer.
 ------------------------------------------------------------------------------
 Node/Client	A set of computers with a	You have a right to install and
 		minimum of one host and one	Use the Product on a Host/Client
 		client connected to each	Pair or a Single Node.  Copies
 		other ("Host/Client Pair"),	of the Product installed on a
 		or in certain instances, a	Host/Client Pair or Single Node
 		single computer			may not be transferred to any
 		("Single Node")			other host or client computers
 						or other single nodes. You can
 						continue to Use the Product on
 						licensed clients when a new
 						server is introduced to the
 						licensed clients.
 ------------------------------------------------------------------------------
 Cluster		More than two computers		You have a right to install and
 		physically connected together	Use the Product on each
 		in a cluster configuration	Clustered Computer. The
 		(each of which is referred to	installed copy may not be
 		as "Clustered Computer")	transferred to or used on any
 						other computer.
 	Storage.  You may copy the Product into the local memory or storage
 device of the hardware configuration loaded with the Authorized Copies. You may
 copy the Product onto a reasonable number of network servers or a secure
 intranet for the sole purpose of distributing the Product to the Computers,
 Host/Client Pairs, Computer Nodes, or Clustered Computers.  You may make
 archival or back-up copies of the Product. You shall keep the activation key
 with the hardware configuration to which the activation key is licensed. You
 should keep copies of the activation key information for future retrieval
 purposes.
 2.	 NEW RELEASES.  "New Release" means a release of the Product that may
 contain fixes, corrections, or minor improvements to the Product.  New Releases
 are distributed from time to time solely at the option of HP.  If HP offers a
 New Release, it may come with its own terms and conditions, however if it does
 not, You may use the New Release only under the terms and conditions of this
 Agreement.
 3.	NEW VERSIONS.  "New Version" means a version of the Product that may
 contain significant changes, enhancements, and/or functional improvements to
 the Product.  New Versions are distributed solely at the option of HP.  If HP
 offers a New Version, it may come with its own terms and conditions, however
 if it does not, You may use the New Version only under the terms and conditions
 of this Agreement.
 4.	OWNERSHIP.   The Product is owned and copyrighted by Hewlett-Packard
 Development Company, L.P., HP's intellectual property management company, and
 by third party suppliers, except for the Ancillary Software, which is owned and
 copyrighted by the Ancillary Software providers indicated in the ANCILLARY
 SOFTWARE list.  Your right to Use the Product confers no title or ownership and
 is not a sale of the Product or any part thereof.  Third party suppliers and
 Ancillary Software providers are intended beneficiaries under this Agreement
 and may protect their rights in their respective portions of the Product
 directly against You.
 5.	TRANSFER. Without the prior written consent of HP, or unless
 specifically permitted in the Ancillary Software License,  You have no right
 (a) to rent, lease, lend, or otherwise transfer the rights to the Product to
 anyone else; (b) to Use the Product for commercial timesharing or bureau use;
 or (c) to copy the Product onto any public or distributed network.
 6.	 COPYRIGHT.  United States copyright laws, other countries' copyright
 laws, and international treaty provisions protect the Product.  You shall not
 remove any product identification, copyright notices, or proprietary notices
 from the Product.
 7.	SUPPORT.  Support terms and conditions and contact information are
 detailed in the Worldwide Limited Warranty and Technical Support for Industry
 Standard Server Products statement ("Support Statement"), a copy of which is
 available on the HP web site at www.hp.com.  Subject to the terms of the
 Support Statement, for HP software products installed on HP computers,
 technical support for questions regarding media and Product installation may
 be available for a ninety (90) day period from the date of purchase of the HP
 computer on which this Product is installed ("Support Term").  To access this
 support in North America, call the HP Technical Support Phone Center at
 1-800-652-6672.  This service is available during normal business hours,
 Monday through Friday, during the Support Term.  Outside North America, call
 the nearest HP Technical Support Center.  No other support, including
 without limitation any on-site support, is provided under this Agreement.
 8.	LIMITATION ON REVERSE ENGINEERING.  Reverse engineering of Ancillary
 Software shall be governed by its respective Ancillary Software License. As
 for the remainder of the Product, You shall not modify, disassemble, reverse
 engineer, decompile, decrypt, or otherwise attempt to access or determine the
 source code of the Product without HP's prior written consent.  Where You have
 other statutory rights with regard to software, You shall provide HP with
 reasonably detailed information regarding any intended disassembly or
 decompilation of the Product prior to performing such disassembly or
 decompilation.  You shall not decrypt the Product unless necessary for the
 licensed Use of the Product.
 9.	RESERVATION OF RIGHTS.  HP, its third party suppliers, and Ancillary
 Software providers reserve all rights not expressly granted to You in this
 Agreement.
 10.	TERM AND TERMINATION.  You may exercise the rights of this Agreement
 and of the Ancillary Software Licenses for a period of time starting at Your
 acceptance of the terms and conditions of this Agreement and for so long as
 You meet such terms and conditions ("Term").  Notwithstanding the foregoing,
 HP may terminate Your right to Use the Product, upon notice, for Your failure
 to comply with any such term or condition.  Immediately upon termination, You
 shall remove, destroy, or return to HP all copies of the Product, including
 those copies of the Product that are merged into Your adaptations, except for
 individual pieces of data in Your database.  With HP's prior written consent,
 one copy of the Product may be retained, for archival purposes only, subsequent
 to termination.  You may terminate this Agreement at any time by returning or
 destroying the Product together with merged portions in any form.
 11.	CONFIDENTIAL COMPUTER SOFTWARE.  Valid license from HP required for
 possession, use, or copying.  Consistent with FAR 12.211 and 12.212, Commercial
 Computer Software, Computer Software Documentation, and Technical Data for
 Commercial Items are licensed to the U.S. Government under vendor's standard
 commercial license.
 12.	COMPLIANCE WITH LAW.  The Product and any associated hardware,
 software, technology or services may not be exported, reexported, transferred
 or downloaded to persons or entities listed on the U.S. Department of Commerce
 Denied Persons List, Entity List of proliferation concern, or on any U.S.
 Treasury Department Designated Nationals exclusion list, any country under
 U.S. economic embargo, or to parties directly or indirectly involved in the
 development or production of nuclear, chemical, biological weapons or in
 missile technology programs as specified in the U.S. Export Administration
 Regulations (15 CFR 744).  By accepting this Agreement You confirm that You
 are not (i) located in (or a national resident of) any country under U.S.
 economic embargo, (ii) identified on any U.S. Department of Commerce Denied
 Persons List, Entity List or Treasury Department Designated Nationals exclusion
 list, and (iii) directly or indirectly involved in the development or
 production of nuclear, chemical, biological weapons or in missile technology
 programs as specified in the U.S. Export Administration Regulations.
 13.	APPLICABLE LAW. This Agreement shall be construed in accordance with
 the laws of the State of Texas, without regard to conflict of laws principles.
 The United Nations Convention on Contracts for the International Sale of Goods
 is specifically disclaimed.  If the Product was acquired outside the United
 States, then local law may apply.
 14.	SEVERABILITY.  If any term or provision of this Agreement is determined
 to be illegal or unenforceable, the validity or enforceability of the remainder
 of the terms or provisions herein will remain valid and in full force and
 effect. Failure or delay in enforcing any right or provision of this Agreement
 shall not be deemed a waiver of such right or provision with respect to any
 subsequent breach. Provisions herein, which by their nature extend beyond the
 termination of the license in the Product, will remain in effect until
 fulfilled.
 15.	CONSENT TO USE OF DATA. You agree that HP may collect and use technical
 information that You provide in connection with Your Use and request for
 technical support of the Product from HP, however, HP will not use this
 information in a form that personally identifies You.
 16.	ASSIGNMENT.  You may not assign, sublicense or transfer this Agreement,
 the Product, or any rights or obligations hereunder without the prior written
 consent of HP.  Any such attempted assignment, sublicense, or transfer will be
 null and void, and in such event, HP may terminate this Agreement immediately.
 Notwithstanding the foregoing, You may assign this Agreement and the rights
 granted hereunder with the transfer of all or substantially all of Your
 business.  The right to assign or transfer Ancillary Software is governed by
 the terms and conditions of the Ancillary Software Licenses.
 17.	ENTIRE AGREEMENT.  This Agreement, including all Ancillary Software
 Licenses in the ANCILLARY SOFTWARE list, is the final, complete and exclusive
 agreement between You and HP relating to the Product, and supersedes any
 previous communications, representations, or agreements between the parties,
 whether oral or written, regarding the subject matter hereof.  Any additional
 or different terms and conditions not expressly set forth herein will not
 apply.  This Agreement may not be changed except by an amendment signed by an
 authorized representative of both You and HP.  To the extent the terms of any
 HP policies or programs for support services conflict with the terms of this
 Agreement, the terms of this Agreement shall control.
 18.	WARRANTY
 	a.	NO ACTIVATION KEY REQUIRED SOFTWARE - AS-IS WARRANTY STATEMENT:
 	DISCLAIMER.  TO THE EXTENT ALLOWED BY APPLICABLE LAW, THIS PRODUCT AND
 SUPPORT SERVICES, IF ANY, ARE PROVIDED TO YOU "AS IS" WITHOUT WARRANTIES OF
 ANY KIND, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED.  HP SPECIFICALLY
 DISCLAIMS ANY IMPLIED WARRANTIES OF ANY KIND, INCLUDING WITHOUT LIMITATION,
 WARRANTY OF MERCHANTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT, TITLE,
 ACCURACY OF INFORMATIONAL CONTENT, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY
 OR COMPLETENESS OF RESPONSES, RESULTS, OR WORKMANLIKE EFFORT, LACK OF VIRUSES,
 AND LACK OF NEGLIGENCE, ALL WITH REGARD TO THE PRODUCT, AND THE PROVISION OF
 OR FAILURE TO PROVIDE SUPPORT SERVICES.  IN ADDITION, WITHOUT LIMITATION,
 THERE IS NO WARRANTY OF QUIET ENJOYMENT, QUIET POSSESSION AND CORRESPONDENCE
 TO DESCRIPTION WITH REGARD TO THE PRODUCT.  YOU ASSUME THE ENTIRE RISK AS TO
 THE RESULTS AND PERFORMANCE OF THE PRODUCT.  NO ORAL OR WRITTEN INFORMATION OR
 ADVICE GIVEN BY HP, HP"S AUTHORIZED REPRESENTATIVES, OR ANY OTHER PARTY SHALL
 CREATE A WARRANTY OR AMEND THIS "AS IS" WARRANTY.  Some jurisdictions do not
 allow exclusions of implied warranties or conditions, so the above exclusion
 may not apply to You to the extent prohibited by such local laws. You may have
 other rights that vary from country to country, state to state, or province to
 province.
 	b.	ACTIVATION KEY REQUIRED SOFTWARE - LIMITED WARRANTY.
 HP warrants that the Product will perform substantially in accordance with the
 accompanying materials for a period of ninety (90) days from the date of
 purchase.  If an implied warranty or condition is created by Your
 state/jurisdiction and federal or state/provincial law prohibits disclaimer of
 it, You also have an implied warranty or condition, BUT ONLY AS TO DEFECTS FOR
 WHICH CLAIMS ARE MADE WITHIN NINETY (90) DAYS FROM THE DATE OF PURCHASE. AS TO
 ANY DEFECTS DISCOVERED FOR WHICH A CLAIM IS NOT MADE WITHIN THE NINETY-DAY
 PERIOD, THERE IS NO WARRANTY OR CONDITION OF ANY KIND.
 Some states/jurisdictions do not allow limitations on how long an implied
 warranty or condition lasts, so the above limitation may not apply to You.
 	DISCLAIMER.  The Limited Warranty that appears above is the only
 express warranty made to You and is provided in lieu of any other express
 warranties or implied warrantees (if any) created by any documentation,
 packaging or otherwise.  EXCEPT FOR THE LIMITED WARRANTY, AND TO THE MAXIMUM
 EXTENT PERMITTED BY APPLICABLE LAW, HP AND ITS SUPPLIERS PROVIDE THE PRODUCT
 AND SUPPORT SERVICES (IF ANY) "AS IS" AND WITH ALL FAULTS, AND HEREBY DISCLAIM
 ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS, IMPLIED OR STATUTORY,
 INCLUDING, BUT NOT LIMITED TO, ANY (IF ANY) IMPLIED WARRANTIES, DUTIES OR
 CONDITIONS OF MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE,
 SATISFACTORY QUALITY, NON-INFRINGEMENT OF TITLE, OF ACCURACY OR COMPLETENESS
 OF RESPONSES, OF RESULTS, OF WORKMANLIKE EFFORT, OF LACK OF VIRUSES, AND OF
 LACK OF NEGLIGENCE, ALL WITH REGARD TO THE PRODUCT, AND THE PROVISIONS OF OR
 FAILURE TO PROVIDE SUPPORT SERVICES.  ALSO, THERE IS NO WARRANTY OR CONDITION
 OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, CORRESPONDENCE TO DESCRIPTION,
 OR NON-INFRINGEMENT WITH REGARD TO THE PRODUCT.
 19.	LIMITATION OF LIABILITY.
 	a.	 FOR ALL SOFTWARE WHETHER OR NOT AN ACTIVATION KEY IS REQUIRED
 EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL HP OR ITS
 SUBSIDIARIES, AFFILIATES, DIRECTORS, OFFICERS, EMPLOYEES, AGENTS OR SUPPLIERS
 BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE,
 OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS) ARISING
 OUT OF THE USE, THE INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT,
 WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER
 OR NOT HP WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  THE PRODUCT IS NOT
 DESIGNED, MANUFACTURED OR INTENDED FOR USE IN THE PLANNING, CONSTRUCTION,
 MAINTENANCE, OR OPERATION OF A NUCLEAR FACILITY, AIRCRAFT NAVIGATION OR
 AIRCRAFT COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, LIFE SUPPORT MACHINES,
 OR WEAPONS SYSTEMS (COLLECTIVELY "HIGH RISK APPLICATIONS").  YOU ARE SOLELY
 LIABLE IF THE PRODUCT IS USED FOR HIGH RISK APPLICATIONS, AND YOU SHALL
 INDEMNIFY, DEFEND AND HOLD HP HARMLESS FROM ALL LOSS, DAMAGE, EXPENSE OR
 LIABILITY IN CONNECTION WITH SUCH USE.   YOU ASSUME THE ENTIRE RISK AS TO YOUR
 USE OF THE PRODUCT.  SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
 LIMITATION OF LIABILITY FOR INCIDENTIAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
 LIMITATION MAY NOT APPLY TO YOU TO THE EXTENT PROHIBITED BY SUCH LOCAL LAWS.
 	b.	FOR SOFTWARE REQUIRING AN ACTIVATION KEY
 Notwithstanding any damages that You might incur for any reason whatsoever
 (including, without limitation, all damages referenced above and all direct
 or general damages), the entire liability of HP and any of its suppliers under
 any provision of this EULA and Your exclusive remedy for all of the foregoing
 (except for any remedy of repair or replacement if elected by HP with respect
 to any breach of the Limited Warranty) shall be limited to the greater of the
 amount actually paid by You for the Product or U.S. $5.00.  The foregoing
 limitations, exclusions and disclaimers (including Warranty above) shall apply
 to the maximum extent permitted by applicable law, even if any remedy fails of
 its essential purpose.
 REV08/51/03	End User License Agreement
--- a/amd64/usr/man/man8/hpssaducli.8.gz
+++ b/amd64/usr/man/man8/hpssaducli.8.gz
--- a/amd64/usr/sbin/hpssaducli
+++ b/amd64/usr/sbin/hpssaducli
@ -0,0 +1,12 @@
 #!/bin/bash
 export HPSSADU_BIN_INSTALLATION_DIR=/opt/hp/hpssaducli/bin/
 if [ '/usr/bin/tty -s' -o "$HPLSPINSTALL" = "TRUE" ]; then
   ${HPSSADU_BIN_INSTALLATION_DIR}hpssaducli $*
 else
   /usr/bin/X11/xterm -T xterm -hold -e ${HPSSADU_BIN_INSTALLATION_DIR}hpssaducli $* 
   if [ "$?" != 0 ]; then
      exec ${HPSSADU_BIN_INSTALLATION_DIR}hpssaducli $* 2>/dev/null|cat > /dev/null
   fi
 fi
--- a/build_orig.sh
+++ b/build_orig.sh
@ -0,0 +1,64 @@
 #!/bin/bash
 # the directory of the script
 DIR=`cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd`
 echo "Working directory $DIR"
 # the temp directory used, within $DIR
 WORK_DIR=`mktemp -d -p "$DIR"`
 echo "Creating temp working directory $WORK_DIR"
 # deletes the temp directory
 function cleanup {
  rm -rf "$WORK_DIR"
  echo "Deleted temp working directory $WORK_DIR"
 }
 # register the cleanup function to be called on the EXIT signal
 trap cleanup EXIT
 # Download Files specified in files.diz
 while IFS=! read type app version outputfile url md5
 do
  echo "Downloading $app Version: $version"
  #use -O for output file. define $outputfile yourself
  wget --no-check-certificate --tries=1 -O $DIR/../$outputfile --timeout=5 "$url"
  # use $(..) instead of backticks.
  calculated_md5=$(md5sum "$DIR/../$outputfile" | cut -f 1 -d " ")
  # compare md5
  case "$calculated_md5" in
    "$md5" )
      echo "$DIR/../$outputfile md5 ok"
    ;;
    *)
      echo "$DIR/../$outputfile md5 NOT ok"
      exit 1
    ;;
  esac
 done < "$DIR/files.diz"
 # Extract to specified dir and set some variables
 while IFS=! read type app version outputfile url md5
 do
  mkdir -p $WORK_DIR/${app}-${version}/${type}
  pushd $WORK_DIR/${app}-${version}/${type}
  rpm2cpio $DIR/../$outputfile | cpio -idmv
  echo "${app}_${version}.orig.tar.gz" > $WORK_DIR/filename.txt
  echo "${app}-${version}" > $WORK_DIR/dirname.txt
  echo "${version}" > $WORK_DIR/version.txt
  popd
 done < "$DIR/files.diz"
 FILENAME=`cat $WORK_DIR/filename.txt`
 DIRNAME=`cat $WORK_DIR/dirname.txt`
 echo "Creating $DIR/../$FILENAME "
 pushd $WORK_DIR
 tar -czf $DIR/../$FILENAME $DIRNAME
 popd
 VER=`cat $WORK_DIR/version.txt`
 echo "Importing $DIR/../$FILENAME as $VER into git"
 cleanup
 gbp import-orig --pristine-tar -u $VER $DIR/../$FILENAME
 exit 0
--- a/debian/README.source
+++ b/debian/README.source
@ -0,0 +1,11 @@
 hpssacli (9.20.9.0-1) unstable; urgency=low
  Sources have been repacked from the following upstream packages:
    a569ddb584d2133bf44f06992d746f51  hpssacli-9.20-9.0.i386.rpm
    c0d6f57fe3cf1fa6342fb0097e3ae100  hpssacli-9.20-9.0.x86_64.rpm
  Both have been turned into tarballs using alien and then uncompressed to
  i386 and amd64 sub-directories.
 -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Mon, 20 Aug 2012 19:58:55 +0200
--- a/debian/changelog
+++ b/debian/changelog
@ -0,0 +1,48 @@
 hpssaducli (2.40.13.0-2) UNRELEASED; urgency=medium
  * cleanup typos
 -- Mario Fetka <mario@localhost.localdomain>  Thu, 26 May 2016 21:09:53 +0200
 hpssaducli (2.20.11.0-1) unstable; urgency=low
  * Non-maintainer upload.
  * Bump to new release
  * Imported Upstream version 2.0.23.0
 -- Mario Fetka <mario@localhost.localdomain>  Sat, 21 May 2016 07:46:39 +0200
 hpssaducli (9.20.9.0-1) unstable; urgency=low
  [ Adam Cécile (Le_Vert) ]
  * New upstream release (Closes: #225).
  * Now ship amd64 binaries along i386 ones.
  * Rewrite debian/copyright to use machine readable format.
  [ Mario Fetka ]
 -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Mon, 20 Aug 2012 19:58:55 +0200
 hpssaducli (8.25.5-1) unstable; urgency=low
  * New upstream release.
  * Do not depend on libstdc++2.10 anymore because it has been removed
    from current distros. Ship our own lib (extracted from etch package)
    in a private directory.
  * Add upstream changelog.
  * Fix download url (debian/copyright).
 -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Mon, 27 Apr 2009 15:41:54 +0200
 hpssaducli (8.10-1) unstable; urgency=low
  * New upstream release.
  * debian/watch added (url stolen to gentoo).
 -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Tue, 23 Dec 2008 14:39:26 +0100
 hpssaducli (7.80-1) unstable; urgency=low
  * Initial release.
 -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Wed, 20 Aug 2008 13:41:40 +0200
--- a/debian/compat
+++ b/debian/compat
@ -0,0 +1 @@
 7
--- a/debian/control
+++ b/debian/control
@ -0,0 +1,13 @@
 Source: hpssaducli
 Section: non-free/admin
 Priority: optional
 Maintainer: Adam Cécile (Le_Vert) <gandalf@le-vert.net>
 Build-Depends: debhelper (>= 5), sharutils
 Standards-Version: 3.9.3
 Package: hpssaducli
 Architecture: i386 amd64
 Depends: ${shlibs:Depends}, ${misc:Depends}
 Description: HPE Smart Storage Administrator Diagnostics and SmartSSD Wear Gauge Utility CLI
 This is the proprietary command line utility from HP to manage HP/Compaq
 SmartArray hardware RAID HBAs mostly found in Proliant servers.
--- a/debian/copyright
+++ b/debian/copyright
@ -0,0 +1,361 @@
 Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
 Upstream-Name: hpacucli
 Source: http://h20000.www2.hp.com/bizsupport/site/search/r4_0/jsp/search.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=468780&tx=hpacucli&sc=2&cf=1&rf=1&lkc=1&lk=1&sts=1&nh=10
 Files: *
 Copyright: Copyright (C) 1988-1991 COMPAQ Computer Corporation
 License: Proprietary
 PROLIANT ESSENTIALS SOFTWARE
 .
 		END USER LICENSE AGREEMENT
 .
 PLEASE READ THIS END USER LICENSE AGREEMENT ("AGREEMENT") CAREFULLY.  THIS
 AGREEMENT IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR SINGLE
 ENTITY) ("YOU") AND HEWLETT-PACKARD COMPANY ("HP").  BY CLICKING THE "AGREE"
 BUTTON BELOW, COPYING, INSTALLING, OR OTHERWISE USING THE SOFTWARE,
 (i) YOU DO SO WITH THE INTENT TO ELECTRONICALLY "EXECUTE" THIS AGREEMENT, AND
 (ii) YOU AGREE TO BE BOUND BY AND COMPLY WITH THE FOLLOWING TERMS AND
 CONDITIONS, INCLUDING THE WARRANTY STATEMENT, AS WELL AS ANY TERMS AND
 CONDITIONS CONTAINED IN THE "ANCILLARY SOFTWARE" LIST.
 .
 IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT,
 (A) IF THIS AGREEMENT IS DISPLAYED ELECTRONICALLY, YOU MAY INDICATE REJECTION
     OF THIS AGREEMENT BY CLICKING THE "DISAGREE" BUTTON;
 (B) YOU SHALL NOT INSTALL THE SOFTWARE; AND
 (C) HP DOES NOT GRANT YOU ANY RIGHTS TO USE THE SOFTWARE.
 NOTWITHSTANDING THE FOREGOING, INSTALLING OR OTHERWISE USING THE SOFTWARE
 INDICATES YOUR ACCEPTANCE OF THE TERMS AND CONDITIONS OF THIS AGREEMENT.
 IF YOU PURCHASED THE SOFTWARE, YOU MAY RETURN THE SOFTWARE TO THE PLACE OF
 PURCHASE FOR A FULL REFUND.
 .
 THE SOFTWARE PROVIDED HEREIN, IS PROVIDED BY HP AND BY THIRD PARTIES, INCLUDING
 THE OPEN SOURCE COMMUNITY ("ANCILLARY SOFTWARE").  USE OF THE HP SOFTWARE, THE
 ANCILLARY SOFTWARE, ACCOMPANYING PRINTED MATERIALS, AND THE "ONLINE" OR
 ELECTRONIC DOCUMENTATION (COLLECTIVELY THE "PRODUCT") IS CONDITIONED UPON AND
 LIMITED BY THE FOLLOWING TERMS AND CONDITIONS, INCLUDING THE "AS IS WARRANTY
 STATEMENT" AND THE TERMS AND CONDITIONS OF THE ANCILLARY SOFTWARE LICENSE
 AGREEMENTS ("ANCILLARY SOFTWARE LICENSES").
 .
 USE OF ANCILLARY SOFTWARE SHALL BE GOVERNED BY THE ANCILLARY SOFTWARE LICENSE,
 EXCEPT THAT THE DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITIES
 PROVISIONS CONTAINED IN THE "AS-IS WARRANTY STATEMENT" OF THIS AGREEMENT SHALL
 ALSO APPLY TO SUCH ANCILLARY SOFTWARE.  HP HAS IDENTIFIED ANCILLARY SOFTWARE
 BY EITHER NOTING THE ANCILLARY SOFTWARE PROVIDER"S OWNERSHIP WITHIN EACH
 ANCILLARY SOFTWARE PROGRAM FILE AND/OR BY PROVIDING LICENSING INFORMATION IN
 THE "ANCILLARY SOFTWARE" LIST. BY ACCEPTING THE TERMS AND CONDITIONS OF THIS
 AGREEMENT, YOU ARE ALSO ACCEPTING THE TERMS AND CONDITIONS OF EACH ANCILLARY
 SOFTWARE LICENSE IN THE ANCILLARY SOFTWARE LIST.
 .
 IF AND ONLY IF THE PRODUCT INCLUDES SOFTWARE LICENSED UNDER THE GNU GENERAL
 PUBLIC LICENSE ("GPL SOFTWARE"), YOU MAY OBTAIN A COMPLETE MACHINE-READABLE
 COPY OF THE GPL SOFTWARE SOURCE CODE ("GPL SOURCE CODE") BY DOWNLOAD FROM A
 SITE SPECIFIED IN THE FOLLOWING HP WEBSITE:
 HTTP://H18004.WWW1.HP.COM/PRODUCTS/SERVERS/PROLIANTESSENTIALS/VALUEPACK/LICENSING.HTML.
 UPON YOUR WRITTEN REQUEST, HP WILL PROVIDE, FOR A FEE COVERING THE COST OF
 DISTRIBUTION, A COMPLETE MACHINE-READABLE COPY OF THE GPL SOURCE CODE, BY MAIL,
 TO YOU.  INFORMATION ABOUT HOW TO MAKE A WRITTEN REQUEST FOR GPL SOURCE CODE
 MAY BE FOUND AT THE FOLLOWING WEBSITE:
 HTTP://H18004.WWW1.HP.COM/PRODUCTS/SERVERS/PROLIANTESSENTIALS/VALUEPACK/LICENSING.HTML .
 .
 .
 LICENSE TERMS
 .
 SUBJECT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT AND ANY RIGHTS,
 LIMITATIONS AND OBLIGATIONS SET FORTH IN THE ANCILLARY SOFTWARE LICENSES:
 .
 1.	LICENSE GRANT
 .
 a.	IF SOFTWARE DOES NOT REQUIRE AN ACTIVATION KEY.  If the Software does
 not require an Activation Key and provided that You comply with all the terms
 and conditions of this Agreement, HP grants You a non-exclusive,
 non-transferable (except as provided in Section 16), worldwide (except for the
 countries referenced  in Section 12) license under HP's copyrights, to install,
 copy on as many computers as you need for your business, use, execute, make
 archival or backup copies, and display ("Use") the object code version of the
 Product on the computer(s) on which this Product is installed and in the
 operating environment as identified by HP in the accompanying materials.
 .
 b.	IF SOFTWARE REQUIRES AN ACTIVATION KEY.  If the Software requires an
 Activation Key, and provided that You comply with all terms and conditions of
 this Agreement, then depending upon the specific hardware configuration You
 employ, HP grants You the following license  ("License Type") and rights:
 .
 	Authorized Copies.  You are licensed to install, make Authorized Copies
 of (as defined in this section), execute, and display ("Use") the object code
 version of the Product on an equivalent number of Computers, Host/Client Pairs,
 Computer Nodes, or Clustered Computers (as defined in the table below) as you
 have Authorized Copies.  Authorized Copies is defined as the number of copies
 that you have paid for as stated in the invoice or comparable document
 evidencing an authorized quantity.
 .
 LICENSE TYPE 	SOFTWARE INSTALLS TO:		LICENSED RIGHTS
 		(hardware configuration)
 ------------------------------------------------------------------------------
 Computer	A computer 			You have a right to install
 						and Use the Product on a single
 						computer. The installed copy
 						may not be transferred to or
 						used on any other computer.
 .
 ------------------------------------------------------------------------------
 Node/Client	A set of computers with a	You have a right to install and
 		minimum of one host and one	Use the Product on a Host/Client
 		client connected to each	Pair or a Single Node.  Copies
 		other ("Host/Client Pair"),	of the Product installed on a
 		or in certain instances, a	Host/Client Pair or Single Node
 		single computer			may not be transferred to any
 		("Single Node")			other host or client computers
 						or other single nodes. You can
 						continue to Use the Product on
 						licensed clients when a new
 						server is introduced to the
 						licensed clients.
 .
 ------------------------------------------------------------------------------
 Cluster		More than two computers		You have a right to install and
 		physically connected together	Use the Product on each
 		in a cluster configuration	Clustered Computer. The
 		(each of which is referred to	installed copy may not be
 		as "Clustered Computer")	transferred to or used on any
 						other computer.
 .
 	Storage.  You may copy the Product into the local memory or storage
 device of the hardware configuration loaded with the Authorized Copies. You may
 copy the Product onto a reasonable number of network servers or a secure
 intranet for the sole purpose of distributing the Product to the Computers,
 Host/Client Pairs, Computer Nodes, or Clustered Computers.  You may make
 archival or back-up copies of the Product. You shall keep the activation key
 with the hardware configuration to which the activation key is licensed. You
 should keep copies of the activation key information for future retrieval
 purposes.
 .
 2.	 NEW RELEASES.  "New Release" means a release of the Product that may
 contain fixes, corrections, or minor improvements to the Product.  New Releases
 are distributed from time to time solely at the option of HP.  If HP offers a
 New Release, it may come with its own terms and conditions, however if it does
 not, You may use the New Release only under the terms and conditions of this
 Agreement.
 3.	NEW VERSIONS.  "New Version" means a version of the Product that may
 contain significant changes, enhancements, and/or functional improvements to
 the Product.  New Versions are distributed solely at the option of HP.  If HP
 offers a New Version, it may come with its own terms and conditions, however
 if it does not, You may use the New Version only under the terms and conditions
 of this Agreement.
 4.	OWNERSHIP.   The Product is owned and copyrighted by Hewlett-Packard
 Development Company, L.P., HP's intellectual property management company, and
 by third party suppliers, except for the Ancillary Software, which is owned and
 copyrighted by the Ancillary Software providers indicated in the ANCILLARY
 SOFTWARE list.  Your right to Use the Product confers no title or ownership and
 is not a sale of the Product or any part thereof.  Third party suppliers and
 Ancillary Software providers are intended beneficiaries under this Agreement
 and may protect their rights in their respective portions of the Product
 directly against You.
 5.	TRANSFER. Without the prior written consent of HP, or unless
 specifically permitted in the Ancillary Software License,  You have no right
 (a) to rent, lease, lend, or otherwise transfer the rights to the Product to
 anyone else; (b) to Use the Product for commercial timesharing or bureau use;
 or (c) to copy the Product onto any public or distributed network.
 6.	 COPYRIGHT.  United States copyright laws, other countries' copyright
 laws, and international treaty provisions protect the Product.  You shall not
 remove any product identification, copyright notices, or proprietary notices
 from the Product.
 7.	SUPPORT.  Support terms and conditions and contact information are
 detailed in the Worldwide Limited Warranty and Technical Support for Industry
 Standard Server Products statement ("Support Statement"), a copy of which is
 available on the HP web site at www.hp.com.  Subject to the terms of the
 Support Statement, for HP software products installed on HP computers,
 technical support for questions regarding media and Product installation may
 be available for a ninety (90) day period from the date of purchase of the HP
 computer on which this Product is installed ("Support Term").  To access this
 support in North America, call the HP Technical Support Phone Center at
 1-800-652-6672.  This service is available during normal business hours,
 Monday through Friday, during the Support Term.  Outside North America, call
 the nearest HP Technical Support Center.  No other support, including
 without limitation any on-site support, is provided under this Agreement.
 8.	LIMITATION ON REVERSE ENGINEERING.  Reverse engineering of Ancillary
 Software shall be governed by its respective Ancillary Software License. As
 for the remainder of the Product, You shall not modify, disassemble, reverse
 engineer, decompile, decrypt, or otherwise attempt to access or determine the
 source code of the Product without HP's prior written consent.  Where You have
 other statutory rights with regard to software, You shall provide HP with
 reasonably detailed information regarding any intended disassembly or
 decompilation of the Product prior to performing such disassembly or
 decompilation.  You shall not decrypt the Product unless necessary for the
 licensed Use of the Product.
 9.	RESERVATION OF RIGHTS.  HP, its third party suppliers, and Ancillary
 Software providers reserve all rights not expressly granted to You in this
 Agreement.
 10.	TERM AND TERMINATION.  You may exercise the rights of this Agreement
 and of the Ancillary Software Licenses for a period of time starting at Your
 acceptance of the terms and conditions of this Agreement and for so long as
 You meet such terms and conditions ("Term").  Notwithstanding the foregoing,
 HP may terminate Your right to Use the Product, upon notice, for Your failure
 to comply with any such term or condition.  Immediately upon termination, You
 shall remove, destroy, or return to HP all copies of the Product, including
 those copies of the Product that are merged into Your adaptations, except for
 individual pieces of data in Your database.  With HP's prior written consent,
 one copy of the Product may be retained, for archival purposes only, subsequent
 to termination.  You may terminate this Agreement at any time by returning or
 destroying the Product together with merged portions in any form.
 11.	CONFIDENTIAL COMPUTER SOFTWARE.  Valid license from HP required for
 possession, use, or copying.  Consistent with FAR 12.211 and 12.212, Commercial
 Computer Software, Computer Software Documentation, and Technical Data for
 Commercial Items are licensed to the U.S. Government under vendor's standard
 commercial license.
 12.	COMPLIANCE WITH LAW.  The Product and any associated hardware,
 software, technology or services may not be exported, reexported, transferred
 or downloaded to persons or entities listed on the U.S. Department of Commerce
 Denied Persons List, Entity List of proliferation concern, or on any U.S.
 Treasury Department Designated Nationals exclusion list, any country under
 U.S. economic embargo, or to parties directly or indirectly involved in the
 development or production of nuclear, chemical, biological weapons or in
 missile technology programs as specified in the U.S. Export Administration
 Regulations (15 CFR 744).  By accepting this Agreement You confirm that You
 are not (i) located in (or a national resident of) any country under U.S.
 economic embargo, (ii) identified on any U.S. Department of Commerce Denied
 Persons List, Entity List or Treasury Department Designated Nationals exclusion
 list, and (iii) directly or indirectly involved in the development or
 production of nuclear, chemical, biological weapons or in missile technology
 programs as specified in the U.S. Export Administration Regulations.
 13.	APPLICABLE LAW. This Agreement shall be construed in accordance with
 the laws of the State of Texas, without regard to conflict of laws principles.
 The United Nations Convention on Contracts for the International Sale of Goods
 is specifically disclaimed.  If the Product was acquired outside the United
 States, then local law may apply.
 14.	SEVERABILITY.  If any term or provision of this Agreement is determined
 to be illegal or unenforceable, the validity or enforceability of the remainder
 of the terms or provisions herein will remain valid and in full force and
 effect. Failure or delay in enforcing any right or provision of this Agreement
 shall not be deemed a waiver of such right or provision with respect to any
 subsequent breach. Provisions herein, which by their nature extend beyond the
 termination of the license in the Product, will remain in effect until
 fulfilled.
 15.	CONSENT TO USE OF DATA. You agree that HP may collect and use technical
 information that You provide in connection with Your Use and request for
 technical support of the Product from HP, however, HP will not use this
 information in a form that personally identifies You.
 16.	ASSIGNMENT.  You may not assign, sublicense or transfer this Agreement,
 the Product, or any rights or obligations hereunder without the prior written
 consent of HP.  Any such attempted assignment, sublicense, or transfer will be
 null and void, and in such event, HP may terminate this Agreement immediately.
 Notwithstanding the foregoing, You may assign this Agreement and the rights
 granted hereunder with the transfer of all or substantially all of Your
 business.  The right to assign or transfer Ancillary Software is governed by
 the terms and conditions of the Ancillary Software Licenses.
 17.	ENTIRE AGREEMENT.  This Agreement, including all Ancillary Software
 Licenses in the ANCILLARY SOFTWARE list, is the final, complete and exclusive
 agreement between You and HP relating to the Product, and supersedes any
 previous communications, representations, or agreements between the parties,
 whether oral or written, regarding the subject matter hereof.  Any additional
 or different terms and conditions not expressly set forth herein will not
 apply.  This Agreement may not be changed except by an amendment signed by an
 authorized representative of both You and HP.  To the extent the terms of any
 HP policies or programs for support services conflict with the terms of this
 Agreement, the terms of this Agreement shall control.
 18.	WARRANTY
 .
 	a.	NO ACTIVATION KEY REQUIRED SOFTWARE - AS-IS WARRANTY STATEMENT:
 .
 	DISCLAIMER.  TO THE EXTENT ALLOWED BY APPLICABLE LAW, THIS PRODUCT AND
 SUPPORT SERVICES, IF ANY, ARE PROVIDED TO YOU "AS IS" WITHOUT WARRANTIES OF
 ANY KIND, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED.  HP SPECIFICALLY
 DISCLAIMS ANY IMPLIED WARRANTIES OF ANY KIND, INCLUDING WITHOUT LIMITATION,
 WARRANTY OF MERCHANTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT, TITLE,
 ACCURACY OF INFORMATIONAL CONTENT, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY
 OR COMPLETENESS OF RESPONSES, RESULTS, OR WORKMANLIKE EFFORT, LACK OF VIRUSES,
 AND LACK OF NEGLIGENCE, ALL WITH REGARD TO THE PRODUCT, AND THE PROVISION OF
 OR FAILURE TO PROVIDE SUPPORT SERVICES.  IN ADDITION, WITHOUT LIMITATION,
 THERE IS NO WARRANTY OF QUIET ENJOYMENT, QUIET POSSESSION AND CORRESPONDENCE
 TO DESCRIPTION WITH REGARD TO THE PRODUCT.  YOU ASSUME THE ENTIRE RISK AS TO
 THE RESULTS AND PERFORMANCE OF THE PRODUCT.  NO ORAL OR WRITTEN INFORMATION OR
 ADVICE GIVEN BY HP, HP"S AUTHORIZED REPRESENTATIVES, OR ANY OTHER PARTY SHALL
 CREATE A WARRANTY OR AMEND THIS "AS IS" WARRANTY.  Some jurisdictions do not
 allow exclusions of implied warranties or conditions, so the above exclusion
 may not apply to You to the extent prohibited by such local laws. You may have
 other rights that vary from country to country, state to state, or province to
 province.
 .
 	b.	ACTIVATION KEY REQUIRED SOFTWARE - LIMITED WARRANTY.
 .
 HP warrants that the Product will perform substantially in accordance with the
 accompanying materials for a period of ninety (90) days from the date of
 purchase.  If an implied warranty or condition is created by Your
 state/jurisdiction and federal or state/provincial law prohibits disclaimer of
 it, You also have an implied warranty or condition, BUT ONLY AS TO DEFECTS FOR
 WHICH CLAIMS ARE MADE WITHIN NINETY (90) DAYS FROM THE DATE OF PURCHASE. AS TO
 ANY DEFECTS DISCOVERED FOR WHICH A CLAIM IS NOT MADE WITHIN THE NINETY-DAY
 PERIOD, THERE IS NO WARRANTY OR CONDITION OF ANY KIND.
 Some states/jurisdictions do not allow limitations on how long an implied
 warranty or condition lasts, so the above limitation may not apply to You.
 .
 	DISCLAIMER.  The Limited Warranty that appears above is the only
 express warranty made to You and is provided in lieu of any other express
 warranties or implied warrantees (if any) created by any documentation,
 packaging or otherwise.  EXCEPT FOR THE LIMITED WARRANTY, AND TO THE MAXIMUM
 EXTENT PERMITTED BY APPLICABLE LAW, HP AND ITS SUPPLIERS PROVIDE THE PRODUCT
 AND SUPPORT SERVICES (IF ANY) "AS IS" AND WITH ALL FAULTS, AND HEREBY DISCLAIM
 ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS, IMPLIED OR STATUTORY,
 INCLUDING, BUT NOT LIMITED TO, ANY (IF ANY) IMPLIED WARRANTIES, DUTIES OR
 CONDITIONS OF MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE,
 SATISFACTORY QUALITY, NON-INFRINGEMENT OF TITLE, OF ACCURACY OR COMPLETENESS
 OF RESPONSES, OF RESULTS, OF WORKMANLIKE EFFORT, OF LACK OF VIRUSES, AND OF
 LACK OF NEGLIGENCE, ALL WITH REGARD TO THE PRODUCT, AND THE PROVISIONS OF OR
 FAILURE TO PROVIDE SUPPORT SERVICES.  ALSO, THERE IS NO WARRANTY OR CONDITION
 OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, CORRESPONDENCE TO DESCRIPTION,
 OR NON-INFRINGEMENT WITH REGARD TO THE PRODUCT.
 .
 19.	LIMITATION OF LIABILITY.
 .
 	a.	 FOR ALL SOFTWARE WHETHER OR NOT AN ACTIVATION KEY IS REQUIRED
 .
 EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL HP OR ITS
 SUBSIDIARIES, AFFILIATES, DIRECTORS, OFFICERS, EMPLOYEES, AGENTS OR SUPPLIERS
 BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE,
 OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS) ARISING
 OUT OF THE USE, THE INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT,
 WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER
 OR NOT HP WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  THE PRODUCT IS NOT
 DESIGNED, MANUFACTURED OR INTENDED FOR USE IN THE PLANNING, CONSTRUCTION,
 MAINTENANCE, OR OPERATION OF A NUCLEAR FACILITY, AIRCRAFT NAVIGATION OR
 AIRCRAFT COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, LIFE SUPPORT MACHINES,
 OR WEAPONS SYSTEMS (COLLECTIVELY "HIGH RISK APPLICATIONS").  YOU ARE SOLELY
 LIABLE IF THE PRODUCT IS USED FOR HIGH RISK APPLICATIONS, AND YOU SHALL
 INDEMNIFY, DEFEND AND HOLD HP HARMLESS FROM ALL LOSS, DAMAGE, EXPENSE OR
 LIABILITY IN CONNECTION WITH SUCH USE.   YOU ASSUME THE ENTIRE RISK AS TO YOUR
 USE OF THE PRODUCT.  SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
 LIMITATION OF LIABILITY FOR INCIDENTIAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
 LIMITATION MAY NOT APPLY TO YOU TO THE EXTENT PROHIBITED BY SUCH LOCAL LAWS.
 .
 	b.	FOR SOFTWARE REQUIRING AN ACTIVATION KEY
 .
 Notwithstanding any damages that You might incur for any reason whatsoever
 (including, without limitation, all damages referenced above and all direct
 or general damages), the entire liability of HP and any of its suppliers under
 any provision of this EULA and Your exclusive remedy for all of the foregoing
 (except for any remedy of repair or replacement if elected by HP with respect
 to any breach of the Limited Warranty) shall be limited to the greater of the
 amount actually paid by You for the Product or U.S. $5.00.  The foregoing
 limitations, exclusions and disclaimers (including Warranty above) shall apply
 to the maximum extent permitted by applicable law, even if any remedy fails of
 its essential purpose.
 .
 REV08/51/03	End User License Agreement
 Files: debian/*
 Copyright: Copyright (C) 2008-2012 Adam Cécile (Le_Vert)
 License: GPL-2.0+
 This package is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation; either version 2 of the License, or
 (at your option) any later version.
 .
 This package is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 .
 You should have received a copy of the GNU General Public License
 along with this program. If not, see <http://www.gnu.org/licenses/>
 .
 On Debian systems, the complete text of the GNU General
 Public License version 2 can be found in "/usr/share/common-licenses/GPL-2".
--- a/debian/dirs
+++ b/debian/dirs
@ -0,0 +1,2 @@
 usr/sbin
 usr/lib/hpssaducli
--- a/debian/docs
+++ b/debian/docs
@ -0,0 +1 @@
 i386/opt/hp/hpssaducli/bin/*.TXT
--- a/debian/hpssaducli.wrapper
+++ b/debian/hpssaducli.wrapper
@ -0,0 +1,6 @@
 #!/bin/sh
 #
 # This file is public domain.
 export LD_LIBRARY_PATH=/usr/lib/hpssaducli:$LD_LIBRARY_PATH
 /usr/lib/hpssaducli/hpssaducli.real $@
--- a/debian/rules
+++ b/debian/rules
@ -0,0 +1,52 @@
 #!/usr/bin/make -f
 # Uncomment this to turn on verbose mode.
 #export DH_VERBOSE=1
 DESTDIR = $(CURDIR)/debian/hpssaducli
 DEB_BUILD_ARCH  ?= $(shell dpkg-architecture -qDEB_BUILD_ARCH)
 build: build-arch build-indep
 build-arch:
 build-indep:
 clean:
 	dh_testdir
 	dh_testroot
 	dh_clean
 install:
 	dh_testdir
 	dh_testroot
 	dh_clean -k
 	dh_installdirs
 ifeq ($(DEB_BUILD_ARCH),i386)
 	install -D -m 755 $(CURDIR)/i386/opt/hp/hpssaducli/bin/hpssaducli \
 		$(DESTDIR)/usr/lib/hpssaducli/hpssaducli.real
 endif
 ifeq ($(DEB_BUILD_ARCH),amd64)
 	install -D -m 755 $(CURDIR)/amd64/opt/hp/hpssaducli/bin/hpssaducli \
 		$(DESTDIR)/usr/lib/hpssaducli/hpssaducli.real
 endif
 	install -D -m 755 $(CURDIR)/debian/hpssaducli.wrapper \
 		$(DESTDIR)/usr/sbin/hpssaducli
 binary-indep: build install
 binary-arch: build install
 	dh_testdir
 	dh_testroot
 	dh_installchangelogs debian/upstream_changelog
 	dh_installdocs
 	dh_installman
 	dh_link
 	dh_strip
 	dh_compress
 	dh_fixperms
 	dh_installdeb
 	dh_shlibdeps -l$(DESTDIR)/usr/lib/hpssaducli/
 	dh_gencontrol
 	dh_md5sums
 	dh_builddeb
 binary: binary-indep binary-arch
 .PHONY: build clean binary-indep binary-arch binary install
--- a/debian/source/format
+++ b/debian/source/format
@ -0,0 +1 @@
 1.0
--- a/debian/upstream_changelog
+++ b/debian/upstream_changelog
@ -0,0 +1,336 @@
 Version: 9.10.22.0  (4 Jun 2012)
  Enhancements
    - Added support for the following controllers: 
      * HP Dynamic Smart Array B120i
      * HP Dynamic Smart Array B320i
      * HP Smart Array P822
    - Now officially supporting and providing native X64 versions in addition
      to existing 32 bit versions
    - Added new features requiring a valid SAAP 2.0 (Smart Array Advanced Pack) license key:
      * Replace Array:
        Allows the transfer of contents of an array to an existing empty
        array or a new array. All logical drives from the source array will
        be transferred. The original array will be deleted and its data
        drives  will be freed as unassigned drives. The drive types at source
        and destination arrays can be different. This allows moving data from
        SATA to SAS, or SAS to SATA.  However, the drive types comprising the
        array must still be of the same type.
      * Heal Array:
        Allows the replacement of failed or degraded physical drives in an
        array with healthy physical drives. The original array and logical
        drive numbering will be unaffected after the replacement. The
        replacement physical drives must be of the same interface type (such
        as SAS, SATA and etc.) as the original drives. The operation will be
        available only if enough unassigned physical drives of the correct
        size are available.
 Version: 9.0.24.0  (27 Mar 2012)
  Enhancements
    - Added support for the following controllers:
      * HP Smart Array P222
      * HP Smart Array P420
      * HP Smart Array P421
      * HP Smart Array P220i
      * HP Smart Array P420i
    - Added support for the following features/devices:
      * Smart Array Advanced Pack 2.0 (SAAP 2.0):
        SAAP 2.0 provides full SAAP 1.0 feature functionality with the
        following additions:
          - RAID 1/10 Advanced Data Mirroring (ADM)
          - Moving and Deleting of Individual Logical Volumes
          - Move operation now supports SATA to SAS, SAS to SATA
          - Predictive Spare Activation
          - > 128 physical drives
          - SmartSSD Wear Gauge
          - Updated Cache Ratio settings
          - Additional Strip Sizes - 512, 1024 on supported controllers and
            configurations
          - Device Temperatures - Controllers, Capacitors, Cache Modules, and
            Hard Drives
          - Overall Performance improvements
          - 3 TB physical drives
 Version: 8.75-12.0  (22 Jun 2011)
  Enhancements
    - *** New ***
      Starting with versions 8.75.12.0, an Offline version of ACU is
      available from http://www.hp.com/ that allows users to boot directly
      into the configuration and maintenance utilities prior to any Host OS
      loading or being installed.
      .
      This new deliverable of ACU is available for download through normal
      software methods (such as searching by Server model, OS, or device) or
      by searching for 'HP ProLiant Offline Array Configuration Utility'
    - SmartSSD Wear Gauge
      This feature is accessible through the ssdinfo command in ACUCLI
      Example code:
        <target> show ssdinfo [detail|summary]
        Provides a summary for solid state drives for the specified controller(s)
        The target can be any valid controller/device
        controller slot=1 show sddinfo
        controller all show ssdinfo
        controller all show ssdinfo detail
        controller all show ssdinfo summary
    - Greater than 2.2 TB Hard Drives
 Version: 8.70-8.0  (11 Mar 2011)
  Enhancements
    - Improved speed of Diagnostic report generation
    - Supported serial logs included in the zip file of the Diagnositc
      reports, when applicable
    - New options available during creation of logical drive size
    - Now showing current and max temperatures for physical drives
    - Support for failed array controllers.  The "ctrl all show" command will
      list any locked up controllers along with valid controllers. For failed
      controllers, a message will display explaining its state along with a
      lockup code, if applicable
    - Support for "-h" and "-help" commandline option
    - HPACUSCRIPTING updates:
      * Will not display array accelerator info in capture files for
        controllers which do not have cache or the cache is not configurable.
        Attempting to set the array accelerator on these controllers will
        result in a warning message (not an error)
      * Support for logical drive command "Size=MAXMBR". This option creates
        the largest possible volume in an array with the maximum size
        constrained by the limits of the 32bit MBR
      * New keyword, SIZEBLOCKS. Input scripts can now specify size as before
        using SIZE (size in MB) or SIZEBLOCKS (size in 512 byte blocks) but
        not both
      * Now displays the disk interface type in the comment section for physical
        disks.
 Version: 8.61-1.0  (8 Feb 2011)
  Fixes
    - In version 8.60-8.0 of HPACUCLI, using the "show or detail commands" on
      any target that includes physical drives can cause the application to
      exit if one or more of the included physical drives are in a failed
      state.
      This release, 8.61-1.0, corrects this problem and allows the command to
      complete successfully.
 Version: 8.60-8.0  (10 Sep 2010)
  Enhancements
    - Overall Performance improvements
      * HPACUCLI as well as in HPACUSCRIPTING 
    - Surface Scan Analysis enhancements
      * Disable
      * High
      * Idle
 Version: 8.50-6.0  (28 May 2010)
  Enhancements
    - Overall Performance improvements
    - Physical drives in a SMART state are allowed to be used at user's
      discretion
    - Diagnostic Report additions:
      * Parity group information for RAID 50 and RAID 60 logical drives
      * Information for SEP devices and Expanders
      * Updated Storage Enclosure names
    - Applicable only with the appropriate SAAP License Key installed:
      * The Move Array operation now allows the user to move an array to
        physical drives that are smaller than the original physical drives,
        provided that all the data in the existing logical drives will fit
        into the new array
          * The new drive set must have the same number of physical drives as
            the existing drive set
    - Added SEP devices and Expanders to "ctrl slot=X show config" and "ctrl
      slot=X show config detail" commands
    - Added an "OS Status" for logical drives to indicate if it is "locked"
      by the OS
    - Added display of Hardware Revision info for SAS Expander boards
      * "<target> enclosure all show detail" should be used in order to see
        the field displayed
    - Added support for being able to run ACUCLI in non-interactive mode for
      read-only commands (show) even if ACU is running. For example:
        # hpacucli ctrl all show
        # hpacucli ctrl slot=1 pd all show status
    - Added "exitonerror" feature which allows the application to exit upon
      encountering any error during execution of a command. This feature is
      useful for scripts invoking ACUCLI and the feature will allow scripts
      to know that an error has occurred.
        * The setting can also be invoked from the console as an application switch
          Example:  "hpacucli -exitonerror < myscript.txt"
        * set [exitonerror=enable|disable]
          Allows a script to decide whether an error encountered during execution
        * show exitonerror
          Displays the current exitonerror setting 
     - Added enclosure show support
       * enclosure [ all | port:box | serialnumber=xxxx ] show [ detail |
         status]
         Outputs the storage enclosure information The target can be any
         valid storage enclosure
         Examples:
           * controller slot=5 enclosure all show
           * controller slot=5 enclosure 4E:1 show detail
           * controller slot=5 enclosure serialnumber=UAB123456 show status
    - Added support for the 'show' command to display devices in a logical or
      physical format similar to the support in ACU (GUI) 
      * set [view=logical|physical]
        - Allows the user to select whether certain show commands display the
          output using a logical or physical view
        - Logical view displays devices using their association with arrays
        - Physical view displays the devices such as physical drives
          according to their relationship with their storage enclosures
        - The default value is logical view
      * show view
        - Displays the current view setting.
      * Examples:
        set view=physical
        show view
    - Added the capability to run multiple commands in command line mode
      (non-interactive)
      * The semicolon (";") is used as a delimiter between commands
      * For example:
        On LINUX, the semicolon must be escaped or in quotes
        hpacucli "ctrl slot=1 show; ctrl slot=1 modify
        drivewritecache=enable; ctrl slot=1 show"
    - HPACUSCRIPTING Additions:
      * Now shows an expanded usage message when invalid command line
        arguments are provided
      * Added feature to allow RAID=RAID1 for >2 disk mirrors. This 
        allows backwards compatibility with "old" cpqacuxe scripting. Capture
        will still output correct RAID level
      * Added AUTO as a valid option for QUEUEDEPTH
      * Overall Performance improvements
      * Added Controller=FIRST support. Controllers are now sorted in capture
        files in slot ascending order
      * Added additional controller information to errors and warnings to
        better identify where problems occur in an input file
 Version: 8.40-4.0  (25 Feb 2010)
  Enhancements
    - Support for Smart Array P812
 Version: 8.35-7.0  (28 Sep 2009)
  Enhancements
    - Changes for HPACUCLI 8.35.X.X:
      * Now supports command line history and tab completion
 Version: 8.30-5.0  (14 Sep 2009)
  Enhancements
    - Changes for HPACUCLI 8.30.X.X:
      * Enclosure View
 Version: 8.28-13.0  (6 May 2009)
  Enhancements
    - Changes for HPACUCLI 8.28.X.X:
      * Command Line Diagnostics (ADUCLI) is now integrated with HPACUCLI
      * Scripting for captures and inputs is now intergrated with HPACUCLI
        This support was previously delivered with ACU
        The scripting command has changed from cpqacuxe to hpacuscripting
 Version: 8.25.5  (19 Feb 2009)
  Enhancements
    - Added Support for the following Controllers:
      * Smart Array P212
      * Smart Array P212 ZMR
      * Smart Array P410
      * Smart Array P410 ZMR
      * Smart Array P410i
      * Smart Array P410i ZMR
      * Smart Array P411
      * Smart Array P411 ZMR
      * Smart Array B110i SATA RAID
   - Additionally, added support for Advanced Pack
 Version: 8.20.18  (23 Jan 2009)
  Enhancements
    - Added Support for the following Controllers:
      * Smart Array P212
      * Smart Array P212 ZMR
      * Smart Array P410
      * Smart Array P410 ZMR
      * Smart Array P411
      * Smart Array P411 ZMR
    - Additionally, added support for Smart Array Advanced Pack
 Version: 8.10.2  (6 Jun 2008)
  Fixes
    - Fixed an issue related to an incorrect Background Parity Initialization
      status being displayed for RAID 5 and RAID 6 Logical Drives
 Version: 8.0.14  (26 Feb 2008)
  Enhancements
    - Added Dual Domain Support for the HP Smart Array P800 Controller
    - Added 512K Stripe Size for RAID 5 (only on the following controllers
      with minimum FW 5.00):
        * Smart Array E500
        * Smart Array P400/400i
        * Smart Array P800
 Version: 7.85.18  (24 Jul 2007)
  Enhancements
    - Enabled drive write cache for all SAS controllers
 Version: 7.80.6  (27 Apr 2007)
  Enhancements
    - Support SATA NCQ status.
 Version: 7.73.1  (26 Mar 2007)
  Fixes
    - The ACU CLI utility was modified to display a message informing
      customers that a firmware update is required if firmware version 2.04
      is detected on a Smart Array P400, P400i, or P800 controller.
  Enhancements
    - Added support for the Smart Array E500 controller.
 Version: 7.70.12  (14 Dec 2006)
  Enhancements
    - Changed default RAID5 stripe size to 64K for MSA1000/1500
    - Added new stripe-sizes (128KB and 256KB) for the P400, P600 and P800
      controllers to allow migration of volumes from MSA20 to SAS
      controllers.
 Version: 7.60.18  (25 Sep 2006)
  Enhancements
    - CLI now has two new show command parameters -> show [config] [detail].
      See help for usage.
 Version: 7.50.18  (13 Apr 2006)
  Enhancements
    - Added support for the following:
      * Smart Array P400 Controller
      * Smart Array P400i Controller
      * Smart Array E200 Controller
      * Smart Array E200i Controller
    - Added support for over 2 TB on controllers that support it.
    - Array accelerator options are disabled on controllers with zero memory.
    - When using create, add drives, add spares, and remove spares, the user
      can now specify drive ranges. Instead of "1:1,1:2,1:3,1:4" the user can
      type "1:1-1:4".
    - CLI now supports targeting a controller via the chassis serial number.
      See help for additional usage information.
 Version: 7.40.7  (9 Sep 2005)
  Enhancements
    - Updated so RAID ADG is now referred to as RAID 6 (ADG).
 Version: 7.31.1  (24 Jun 2005)
  Fixes
    - Fixes a problem where specifying an array using the “drives” parameter
      on the create logical drive operation could incorrectly result in
      deletion of that array if the create operation fails.
 Version: 7.30.9  (4 May 2005)
  Enhancements
    - Added support for the following:
      * Smart Array P600 controller.
    - Active-Active on redundant controllers that support it.
 Version: 7.21.17  (28 Feb 2005)
  Enhancements
    - Added support for Red Hat Enterprise Linux 4.
 Version: 7.20.16  (14 Feb 2005)
  Fixes
    - Resolved issue where data in cache was found during reboot.
  Enhancements
    - Added support for the standbycontroller=disable command.
 Version: 7.17.1  (11 Dec 2004)
  Fixes
    - Corrected ACU CLI caches status messages to better correspond with ACU.
 Version: 7.15.19  (2 Sep 2004)
  Enhancements
    - Initial release.
--- a/files.diz
+++ b/files.diz
@ -0,0 +1,2 @@
 amd64!hpssaducli!2.40.13.0!hpssaducli-2.40-13.0.x86_64.rpm!https://downloads.linux.hpe.com/SDR/repo/spp/SUSE_LINUX/SLES11-SP4/x86_64/current/hpssaducli-2.40-13.0.x86_64.rpm!361e9ab7557adaaca6e9d814814c0c5b
 i386!hpssaducli!2.40.13.0!hpssaducli-2.40-13.0.i386.rpm!https://downloads.linux.hpe.com/SDR/repo/spp/SUSE_LINUX/SLES11-SP4/i386/current/hpssaducli-2.40-13.0.i386.rpm!b1fbc35f51d40874bab360f2a8d9a0c4
--- a/hpssaducli_2.40.13.0.orig.tar.gz.delta
+++ b/hpssaducli_2.40.13.0.orig.tar.gz.delta
--- a/hpssaducli_2.40.13.0.orig.tar.gz.id
+++ b/hpssaducli_2.40.13.0.orig.tar.gz.id
@ -1 +0,0 @@
 c0eac3e95f49a2a74a69b80176e07bffb077ee95
--- a/i386/opt/hp/hpssaducli/README.TXT
+++ b/i386/opt/hp/hpssaducli/README.TXT
@ -0,0 +1,165 @@
 HPE Smart Storage Administrator Diagnostics and SmartSSD Wear Gauge Utility CLI
 Version 2.40-13.0
 11/4/2015
 Description
 -----------
  The HPE Smart Storage Administrator Diagnostics and SmartSSD Wear Gauge 
  Utility CLI (HPSSADUCLI) is a command line application that creates a 
  report of all HPE Storage controllers and disk drives. This report 
  provides vital information to HPE service personnel to assist in 
  identifying faults or conditions that may require attention. 
  The utility can also generate SmartSSD Wear Gauge reports.  These 
  reports contain wear (usage) information for all SmartSSD devices 
  attached to the system.
 * All other product names mentioned herein may be trademarks of their 
  respective companies.
 Supported Operating Systems and Platforms
 -----------------------------------------
 Linux 32-bit components:  
   SuSE Linux Enterprise Server 10
   SuSE Linux Enterprise Server 11
   Red Hat Enterprise Linux 5
   Red Hat Enterprise Linux 6
   Red Hat Enterprise Linux 7
 Linux 64-bit components:
   SuSE Linux Enterprise Server 10 (x86_64)
   SuSE Linux Enterprise Server 11 (x86_64)
   Red Hat Enterprise Linux 5 (x86_64)
   Red Hat Enterprise Linux 6 (x86_64)
   Red Hat Enterprise Linux 7 (x86_64)
   Debian Sarge 64 bit
   Debian Etch (amd64)
   NOTE: For Red Hat Enterprise Linux 7.1 the sg driver must be manually 
         added so that it is loaded at boot time. Without the sg driver being
         loaded, devices or controllers may not be discovered.
         Here is a recommended way to do this:
            sudo echo sg > /etc/modules-load.d/sg.conf
            sudo rebo
 * Any platform that requires the CCISS driver should use version 3.6.28 or newer.
 These drivers are available from http://www.hp.com.
 Supported Controllers
 ---------------------
  Dynamic Smart Array B110i SATA RAID
  Smart Array P212 Controller
  Smart Array P410 Controller
  Smart Array P410i Controller
  Smart Array P411 Controller
  Smart Array P711m Controller
  Smart Array P712m Controller
  Smart Array P812 Controller
  Dynamic Smart Array B120i
  Dynamic Smart Array B320i
  Smart Array P220i Controller
  Smart Array P222 Controller
  Smart Array P420 Controller
  Smart Array P420i Controller
  Smart Array P421 Controller
  Smart Array P721m Controller
  Smart Array P822 Controller
  Smart Array P230i Controller
  Smart Array P430 Controller
  Smart Array P431 Controller
  Smart Array P530 Controller
  Smart Array P531 Controller
  Smart Array P731m Controller
  Smart Array P830 Controller
  Smart Array P830i Controller
  Dynamic Smart Array B140i
  Smart HBA H240 Controller
  Smart HBA H240ar Controller
  Smart HBA H241 Controller
  Smart HBA H244br Controller
  Smart Array P244br Controller
  Smart Array P246br Controller
  Smart Array P440 Controller
  Smart Array P440ar Controller
  Smart Array P441 Controller
  Smart Array P741m Controller
  Smart Array P840 Controller
  Smart Array P840ar Controller
  Smart Array P841 Controller
 Installing & Running the HPE Smart Storage Administrator
 --------------------------------------------------------------
  Installation:
    HPSSADUCLI is distributed using Red Hat Package Manager (RPM) packages
    If there is an older version of HPSSADUCLI installed on the system, please
       use "rpm -e hpssaducli" to remove it first. Use "rpm -i <file name>" to
       install the application.
    Please type "man rpm" for other details regarding RPM.
    The software resides in /opt/hp/hpssaducli and the executable 
    name is hpssaducli which is located in /usr/sbin.
    When attempting to run HPSSADUCLI on any HP-supported version of Linux, it is
    highly recommended that you install the latest version of the HPE ProLiant
    Smart Array Controller driver for your intended Linux operating system.
    Drivers may be obtained by clicking on "Support & Drivers" from HP's
    website at:  http://www.hp.com
 Running HPSSADUCLI
 ------------------------------------------------------------------------
 To run the command-line application:    
   Open a command prompt and change directory (cd) to the location
      where HPSSADUCLI is installed.  This is commonly /opt/hp/hpssaducli/bin. 
   To generate a diagnostic report, enter the following command:
       hpssaducli -f adu-report.zip
   To generate a SmartSSD Wear gauge report, enter the following command:
       hpssaducli -ssd -f ssd-report.zip
   More options can be found by "hpssaducli -help".
 Additional Notes
 ----------------
 Both the diagnostic and SmartSSD wear gauge reports are generated in compressed
  (ZIP) format.
 The diagnostic report output archive contains the following files:
   * ADUReport.txt          => Diagnostic report in text format
   * ADUReport.xml          => Diagnostic report in XML format
   * ADUReport.htm          => HTML viewer for diagnostic report
   * report.checksum        => checksum file
   * SlotX.txt (SlotX.old)  => Controller serial output log
   Note: The serial output log file(s) are only available if the "HPE Storage
         Agent" daemon is installed and running.
   To view the diagnostic report in a browser, extract the ADUReport.htm. Open
      ADUReport.htm in the browser.
 The SmartSSD wear gauge report output archive contains the following files:
   * SmartSSDWearGaugeReport.txt => SmartSSD wear gauge report in text format
   * SmartSSDWearGaugeReport.js  => SmartSSD wear gauge report in JSON format
   * SmartSSDWearGaugeReport.htm => HTML viewer for the JSON wear gauge report
   To view the SmartSSD wear gauge report in a browser, extract the
   SmartSSDWearGaugeReport.js, SmartSSDWearGaugeReport.htm files to a
   directory (both files must reside in the same directory).  Open
   SmartSSDWearGaugeReport.htm in the browser.
 Known Issues
 ------------
 N/A
 Feedback
 --------
 * For support for HPSSADUCLI or Smart Array controllers, please visit the web at 
    http://support.hp.com.
--- a/i386/opt/hp/hpssaducli/bin/hpssaducli
+++ b/i386/opt/hp/hpssaducli/bin/hpssaducli
--- a/i386/opt/hp/hpssaducli/bin/hpssaduesxi
+++ b/i386/opt/hp/hpssaducli/bin/hpssaduesxi
--- a/i386/opt/hp/hpssaducli/bin/upgrade.txt
+++ b/i386/opt/hp/hpssaducli/bin/upgrade.txt
--- a/i386/opt/hp/hpssaducli/hpssadu.license
+++ b/i386/opt/hp/hpssaducli/hpssadu.license
@ -0,0 +1,338 @@
 		PROLIANT ESSENTIALS SOFTWARE
 		END USER LICENSE AGREEMENT
 PLEASE READ THIS END USER LICENSE AGREEMENT ("AGREEMENT") CAREFULLY.  THIS
 AGREEMENT IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR SINGLE
 ENTITY) ("YOU") AND HEWLETT-PACKARD COMPANY ("HP").  BY CLICKING THE "AGREE"
 BUTTON BELOW, COPYING, INSTALLING, OR OTHERWISE USING THE SOFTWARE,
 (i) YOU DO SO WITH THE INTENT TO ELECTRONICALLY "EXECUTE" THIS AGREEMENT, AND
 (ii) YOU AGREE TO BE BOUND BY AND COMPLY WITH THE FOLLOWING TERMS AND
 CONDITIONS, INCLUDING THE WARRANTY STATEMENT, AS WELL AS ANY TERMS AND
 CONDITIONS CONTAINED IN THE "ANCILLARY SOFTWARE" LIST.
 IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT,
 (A) IF THIS AGREEMENT IS DISPLAYED ELECTRONICALLY, YOU MAY INDICATE REJECTION
    OF THIS AGREEMENT BY CLICKING THE "DISAGREE" BUTTON;
 (B) YOU SHALL NOT INSTALL THE SOFTWARE; AND
 (C) HP DOES NOT GRANT YOU ANY RIGHTS TO USE THE SOFTWARE.
 NOTWITHSTANDING THE FOREGOING, INSTALLING OR OTHERWISE USING THE SOFTWARE
 INDICATES YOUR ACCEPTANCE OF THE TERMS AND CONDITIONS OF THIS AGREEMENT.
 IF YOU PURCHASED THE SOFTWARE, YOU MAY RETURN THE SOFTWARE TO THE PLACE OF
 PURCHASE FOR A FULL REFUND.
 THE SOFTWARE PROVIDED HEREIN, IS PROVIDED BY HP AND BY THIRD PARTIES, INCLUDING
 THE OPEN SOURCE COMMUNITY ("ANCILLARY SOFTWARE").  USE OF THE HP SOFTWARE, THE
 ANCILLARY SOFTWARE, ACCOMPANYING PRINTED MATERIALS, AND THE "ONLINE" OR
 ELECTRONIC DOCUMENTATION (COLLECTIVELY THE "PRODUCT") IS CONDITIONED UPON AND
 LIMITED BY THE FOLLOWING TERMS AND CONDITIONS, INCLUDING THE "AS IS WARRANTY
 STATEMENT" AND THE TERMS AND CONDITIONS OF THE ANCILLARY SOFTWARE LICENSE
 AGREEMENTS ("ANCILLARY SOFTWARE LICENSES").
 USE OF ANCILLARY SOFTWARE SHALL BE GOVERNED BY THE ANCILLARY SOFTWARE LICENSE,
 EXCEPT THAT THE DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITIES
 PROVISIONS CONTAINED IN THE "AS-IS WARRANTY STATEMENT" OF THIS AGREEMENT SHALL
 ALSO APPLY TO SUCH ANCILLARY SOFTWARE.  HP HAS IDENTIFIED ANCILLARY SOFTWARE
 BY EITHER NOTING THE ANCILLARY SOFTWARE PROVIDER"S OWNERSHIP WITHIN EACH
 ANCILLARY SOFTWARE PROGRAM FILE AND/OR BY PROVIDING LICENSING INFORMATION IN
 THE "ANCILLARY SOFTWARE" LIST. BY ACCEPTING THE TERMS AND CONDITIONS OF THIS
 AGREEMENT, YOU ARE ALSO ACCEPTING THE TERMS AND CONDITIONS OF EACH ANCILLARY
 SOFTWARE LICENSE IN THE ANCILLARY SOFTWARE LIST.
 IF AND ONLY IF THE PRODUCT INCLUDES SOFTWARE LICENSED UNDER THE GNU GENERAL
 PUBLIC LICENSE ("GPL SOFTWARE"), YOU MAY OBTAIN A COMPLETE MACHINE-READABLE
 COPY OF THE GPL SOFTWARE SOURCE CODE ("GPL SOURCE CODE") BY DOWNLOAD FROM A
 SITE SPECIFIED IN THE FOLLOWING HP WEBSITE:
 HTTP://H18004.WWW1.HP.COM/PRODUCTS/SERVERS/PROLIANTESSENTIALS/VALUEPACK/LICENSING.HTML.
 UPON YOUR WRITTEN REQUEST, HP WILL PROVIDE, FOR A FEE COVERING THE COST OF
 DISTRIBUTION, A COMPLETE MACHINE-READABLE COPY OF THE GPL SOURCE CODE, BY MAIL,
 TO YOU.  INFORMATION ABOUT HOW TO MAKE A WRITTEN REQUEST FOR GPL SOURCE CODE
 MAY BE FOUND AT THE FOLLOWING WEBSITE:
 HTTP://H18004.WWW1.HP.COM/PRODUCTS/SERVERS/PROLIANTESSENTIALS/VALUEPACK/LICENSING.HTML .
 LICENSE TERMS
 SUBJECT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT AND ANY RIGHTS,
 LIMITATIONS AND OBLIGATIONS SET FORTH IN THE ANCILLARY SOFTWARE LICENSES:
 1.	LICENSE GRANT
 a.	IF SOFTWARE DOES NOT REQUIRE AN ACTIVATION KEY.  If the Software does
 not require an Activation Key and provided that You comply with all the terms
 and conditions of this Agreement, HP grants You a non-exclusive,
 non-transferable (except as provided in Section 16), worldwide (except for the
 countries referenced  in Section 12) license under HP's copyrights, to install,
 copy on as many computers as you need for your business, use, execute, make
 archival or backup copies, and display ("Use") the object code version of the
 Product on the computer(s) on which this Product is installed and in the
 operating environment as identified by HP in the accompanying materials.
 b.	IF SOFTWARE REQUIRES AN ACTIVATION KEY.  If the Software requires an
 Activation Key, and provided that You comply with all terms and conditions of
 this Agreement, then depending upon the specific hardware configuration You
 employ, HP grants You the following license  ("License Type") and rights:
 	Authorized Copies.  You are licensed to install, make Authorized Copies
 of (as defined in this section), execute, and display ("Use") the object code
 version of the Product on an equivalent number of Computers, Host/Client Pairs,
 Computer Nodes, or Clustered Computers (as defined in the table below) as you
 have Authorized Copies.  Authorized Copies is defined as the number of copies
 that you have paid for as stated in the invoice or comparable document
 evidencing an authorized quantity.
 LICENSE TYPE 	SOFTWARE INSTALLS TO:		LICENSED RIGHTS
 		(hardware configuration)
 ------------------------------------------------------------------------------
 Computer	A computer 			You have a right to install
 						and Use the Product on a single
 						computer. The installed copy
 						may not be transferred to or
 						used on any other computer.
 ------------------------------------------------------------------------------
 Node/Client	A set of computers with a	You have a right to install and
 		minimum of one host and one	Use the Product on a Host/Client
 		client connected to each	Pair or a Single Node.  Copies
 		other ("Host/Client Pair"),	of the Product installed on a
 		or in certain instances, a	Host/Client Pair or Single Node
 		single computer			may not be transferred to any
 		("Single Node")			other host or client computers
 						or other single nodes. You can
 						continue to Use the Product on
 						licensed clients when a new
 						server is introduced to the
 						licensed clients.
 ------------------------------------------------------------------------------
 Cluster		More than two computers		You have a right to install and
 		physically connected together	Use the Product on each
 		in a cluster configuration	Clustered Computer. The
 		(each of which is referred to	installed copy may not be
 		as "Clustered Computer")	transferred to or used on any
 						other computer.
 	Storage.  You may copy the Product into the local memory or storage
 device of the hardware configuration loaded with the Authorized Copies. You may
 copy the Product onto a reasonable number of network servers or a secure
 intranet for the sole purpose of distributing the Product to the Computers,
 Host/Client Pairs, Computer Nodes, or Clustered Computers.  You may make
 archival or back-up copies of the Product. You shall keep the activation key
 with the hardware configuration to which the activation key is licensed. You
 should keep copies of the activation key information for future retrieval
 purposes.
 2.	 NEW RELEASES.  "New Release" means a release of the Product that may
 contain fixes, corrections, or minor improvements to the Product.  New Releases
 are distributed from time to time solely at the option of HP.  If HP offers a
 New Release, it may come with its own terms and conditions, however if it does
 not, You may use the New Release only under the terms and conditions of this
 Agreement.
 3.	NEW VERSIONS.  "New Version" means a version of the Product that may
 contain significant changes, enhancements, and/or functional improvements to
 the Product.  New Versions are distributed solely at the option of HP.  If HP
 offers a New Version, it may come with its own terms and conditions, however
 if it does not, You may use the New Version only under the terms and conditions
 of this Agreement.
 4.	OWNERSHIP.   The Product is owned and copyrighted by Hewlett-Packard
 Development Company, L.P., HP's intellectual property management company, and
 by third party suppliers, except for the Ancillary Software, which is owned and
 copyrighted by the Ancillary Software providers indicated in the ANCILLARY
 SOFTWARE list.  Your right to Use the Product confers no title or ownership and
 is not a sale of the Product or any part thereof.  Third party suppliers and
 Ancillary Software providers are intended beneficiaries under this Agreement
 and may protect their rights in their respective portions of the Product
 directly against You.
 5.	TRANSFER. Without the prior written consent of HP, or unless
 specifically permitted in the Ancillary Software License,  You have no right
 (a) to rent, lease, lend, or otherwise transfer the rights to the Product to
 anyone else; (b) to Use the Product for commercial timesharing or bureau use;
 or (c) to copy the Product onto any public or distributed network.
 6.	 COPYRIGHT.  United States copyright laws, other countries' copyright
 laws, and international treaty provisions protect the Product.  You shall not
 remove any product identification, copyright notices, or proprietary notices
 from the Product.
 7.	SUPPORT.  Support terms and conditions and contact information are
 detailed in the Worldwide Limited Warranty and Technical Support for Industry
 Standard Server Products statement ("Support Statement"), a copy of which is
 available on the HP web site at www.hp.com.  Subject to the terms of the
 Support Statement, for HP software products installed on HP computers,
 technical support for questions regarding media and Product installation may
 be available for a ninety (90) day period from the date of purchase of the HP
 computer on which this Product is installed ("Support Term").  To access this
 support in North America, call the HP Technical Support Phone Center at
 1-800-652-6672.  This service is available during normal business hours,
 Monday through Friday, during the Support Term.  Outside North America, call
 the nearest HP Technical Support Center.  No other support, including
 without limitation any on-site support, is provided under this Agreement.
 8.	LIMITATION ON REVERSE ENGINEERING.  Reverse engineering of Ancillary
 Software shall be governed by its respective Ancillary Software License. As
 for the remainder of the Product, You shall not modify, disassemble, reverse
 engineer, decompile, decrypt, or otherwise attempt to access or determine the
 source code of the Product without HP's prior written consent.  Where You have
 other statutory rights with regard to software, You shall provide HP with
 reasonably detailed information regarding any intended disassembly or
 decompilation of the Product prior to performing such disassembly or
 decompilation.  You shall not decrypt the Product unless necessary for the
 licensed Use of the Product.
 9.	RESERVATION OF RIGHTS.  HP, its third party suppliers, and Ancillary
 Software providers reserve all rights not expressly granted to You in this
 Agreement.
 10.	TERM AND TERMINATION.  You may exercise the rights of this Agreement
 and of the Ancillary Software Licenses for a period of time starting at Your
 acceptance of the terms and conditions of this Agreement and for so long as
 You meet such terms and conditions ("Term").  Notwithstanding the foregoing,
 HP may terminate Your right to Use the Product, upon notice, for Your failure
 to comply with any such term or condition.  Immediately upon termination, You
 shall remove, destroy, or return to HP all copies of the Product, including
 those copies of the Product that are merged into Your adaptations, except for
 individual pieces of data in Your database.  With HP's prior written consent,
 one copy of the Product may be retained, for archival purposes only, subsequent
 to termination.  You may terminate this Agreement at any time by returning or
 destroying the Product together with merged portions in any form.
 11.	CONFIDENTIAL COMPUTER SOFTWARE.  Valid license from HP required for
 possession, use, or copying.  Consistent with FAR 12.211 and 12.212, Commercial
 Computer Software, Computer Software Documentation, and Technical Data for
 Commercial Items are licensed to the U.S. Government under vendor's standard
 commercial license.
 12.	COMPLIANCE WITH LAW.  The Product and any associated hardware,
 software, technology or services may not be exported, reexported, transferred
 or downloaded to persons or entities listed on the U.S. Department of Commerce
 Denied Persons List, Entity List of proliferation concern, or on any U.S.
 Treasury Department Designated Nationals exclusion list, any country under
 U.S. economic embargo, or to parties directly or indirectly involved in the
 development or production of nuclear, chemical, biological weapons or in
 missile technology programs as specified in the U.S. Export Administration
 Regulations (15 CFR 744).  By accepting this Agreement You confirm that You
 are not (i) located in (or a national resident of) any country under U.S.
 economic embargo, (ii) identified on any U.S. Department of Commerce Denied
 Persons List, Entity List or Treasury Department Designated Nationals exclusion
 list, and (iii) directly or indirectly involved in the development or
 production of nuclear, chemical, biological weapons or in missile technology
 programs as specified in the U.S. Export Administration Regulations.
 13.	APPLICABLE LAW. This Agreement shall be construed in accordance with
 the laws of the State of Texas, without regard to conflict of laws principles.
 The United Nations Convention on Contracts for the International Sale of Goods
 is specifically disclaimed.  If the Product was acquired outside the United
 States, then local law may apply.
 14.	SEVERABILITY.  If any term or provision of this Agreement is determined
 to be illegal or unenforceable, the validity or enforceability of the remainder
 of the terms or provisions herein will remain valid and in full force and
 effect. Failure or delay in enforcing any right or provision of this Agreement
 shall not be deemed a waiver of such right or provision with respect to any
 subsequent breach. Provisions herein, which by their nature extend beyond the
 termination of the license in the Product, will remain in effect until
 fulfilled.
 15.	CONSENT TO USE OF DATA. You agree that HP may collect and use technical
 information that You provide in connection with Your Use and request for
 technical support of the Product from HP, however, HP will not use this
 information in a form that personally identifies You.
 16.	ASSIGNMENT.  You may not assign, sublicense or transfer this Agreement,
 the Product, or any rights or obligations hereunder without the prior written
 consent of HP.  Any such attempted assignment, sublicense, or transfer will be
 null and void, and in such event, HP may terminate this Agreement immediately.
 Notwithstanding the foregoing, You may assign this Agreement and the rights
 granted hereunder with the transfer of all or substantially all of Your
 business.  The right to assign or transfer Ancillary Software is governed by
 the terms and conditions of the Ancillary Software Licenses.
 17.	ENTIRE AGREEMENT.  This Agreement, including all Ancillary Software
 Licenses in the ANCILLARY SOFTWARE list, is the final, complete and exclusive
 agreement between You and HP relating to the Product, and supersedes any
 previous communications, representations, or agreements between the parties,
 whether oral or written, regarding the subject matter hereof.  Any additional
 or different terms and conditions not expressly set forth herein will not
 apply.  This Agreement may not be changed except by an amendment signed by an
 authorized representative of both You and HP.  To the extent the terms of any
 HP policies or programs for support services conflict with the terms of this
 Agreement, the terms of this Agreement shall control.
 18.	WARRANTY
 	a.	NO ACTIVATION KEY REQUIRED SOFTWARE - AS-IS WARRANTY STATEMENT:
 	DISCLAIMER.  TO THE EXTENT ALLOWED BY APPLICABLE LAW, THIS PRODUCT AND
 SUPPORT SERVICES, IF ANY, ARE PROVIDED TO YOU "AS IS" WITHOUT WARRANTIES OF
 ANY KIND, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED.  HP SPECIFICALLY
 DISCLAIMS ANY IMPLIED WARRANTIES OF ANY KIND, INCLUDING WITHOUT LIMITATION,
 WARRANTY OF MERCHANTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT, TITLE,
 ACCURACY OF INFORMATIONAL CONTENT, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY
 OR COMPLETENESS OF RESPONSES, RESULTS, OR WORKMANLIKE EFFORT, LACK OF VIRUSES,
 AND LACK OF NEGLIGENCE, ALL WITH REGARD TO THE PRODUCT, AND THE PROVISION OF
 OR FAILURE TO PROVIDE SUPPORT SERVICES.  IN ADDITION, WITHOUT LIMITATION,
 THERE IS NO WARRANTY OF QUIET ENJOYMENT, QUIET POSSESSION AND CORRESPONDENCE
 TO DESCRIPTION WITH REGARD TO THE PRODUCT.  YOU ASSUME THE ENTIRE RISK AS TO
 THE RESULTS AND PERFORMANCE OF THE PRODUCT.  NO ORAL OR WRITTEN INFORMATION OR
 ADVICE GIVEN BY HP, HP"S AUTHORIZED REPRESENTATIVES, OR ANY OTHER PARTY SHALL
 CREATE A WARRANTY OR AMEND THIS "AS IS" WARRANTY.  Some jurisdictions do not
 allow exclusions of implied warranties or conditions, so the above exclusion
 may not apply to You to the extent prohibited by such local laws. You may have
 other rights that vary from country to country, state to state, or province to
 province.
 	b.	ACTIVATION KEY REQUIRED SOFTWARE - LIMITED WARRANTY.
 HP warrants that the Product will perform substantially in accordance with the
 accompanying materials for a period of ninety (90) days from the date of
 purchase.  If an implied warranty or condition is created by Your
 state/jurisdiction and federal or state/provincial law prohibits disclaimer of
 it, You also have an implied warranty or condition, BUT ONLY AS TO DEFECTS FOR
 WHICH CLAIMS ARE MADE WITHIN NINETY (90) DAYS FROM THE DATE OF PURCHASE. AS TO
 ANY DEFECTS DISCOVERED FOR WHICH A CLAIM IS NOT MADE WITHIN THE NINETY-DAY
 PERIOD, THERE IS NO WARRANTY OR CONDITION OF ANY KIND.
 Some states/jurisdictions do not allow limitations on how long an implied
 warranty or condition lasts, so the above limitation may not apply to You.
 	DISCLAIMER.  The Limited Warranty that appears above is the only
 express warranty made to You and is provided in lieu of any other express
 warranties or implied warrantees (if any) created by any documentation,
 packaging or otherwise.  EXCEPT FOR THE LIMITED WARRANTY, AND TO THE MAXIMUM
 EXTENT PERMITTED BY APPLICABLE LAW, HP AND ITS SUPPLIERS PROVIDE THE PRODUCT
 AND SUPPORT SERVICES (IF ANY) "AS IS" AND WITH ALL FAULTS, AND HEREBY DISCLAIM
 ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS, IMPLIED OR STATUTORY,
 INCLUDING, BUT NOT LIMITED TO, ANY (IF ANY) IMPLIED WARRANTIES, DUTIES OR
 CONDITIONS OF MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE,
 SATISFACTORY QUALITY, NON-INFRINGEMENT OF TITLE, OF ACCURACY OR COMPLETENESS
 OF RESPONSES, OF RESULTS, OF WORKMANLIKE EFFORT, OF LACK OF VIRUSES, AND OF
 LACK OF NEGLIGENCE, ALL WITH REGARD TO THE PRODUCT, AND THE PROVISIONS OF OR
 FAILURE TO PROVIDE SUPPORT SERVICES.  ALSO, THERE IS NO WARRANTY OR CONDITION
 OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, CORRESPONDENCE TO DESCRIPTION,
 OR NON-INFRINGEMENT WITH REGARD TO THE PRODUCT.
 19.	LIMITATION OF LIABILITY.
 	a.	 FOR ALL SOFTWARE WHETHER OR NOT AN ACTIVATION KEY IS REQUIRED
 EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL HP OR ITS
 SUBSIDIARIES, AFFILIATES, DIRECTORS, OFFICERS, EMPLOYEES, AGENTS OR SUPPLIERS
 BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE,
 OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS) ARISING
 OUT OF THE USE, THE INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT,
 WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER
 OR NOT HP WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  THE PRODUCT IS NOT
 DESIGNED, MANUFACTURED OR INTENDED FOR USE IN THE PLANNING, CONSTRUCTION,
 MAINTENANCE, OR OPERATION OF A NUCLEAR FACILITY, AIRCRAFT NAVIGATION OR
 AIRCRAFT COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, LIFE SUPPORT MACHINES,
 OR WEAPONS SYSTEMS (COLLECTIVELY "HIGH RISK APPLICATIONS").  YOU ARE SOLELY
 LIABLE IF THE PRODUCT IS USED FOR HIGH RISK APPLICATIONS, AND YOU SHALL
 INDEMNIFY, DEFEND AND HOLD HP HARMLESS FROM ALL LOSS, DAMAGE, EXPENSE OR
 LIABILITY IN CONNECTION WITH SUCH USE.   YOU ASSUME THE ENTIRE RISK AS TO YOUR
 USE OF THE PRODUCT.  SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
 LIMITATION OF LIABILITY FOR INCIDENTIAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
 LIMITATION MAY NOT APPLY TO YOU TO THE EXTENT PROHIBITED BY SUCH LOCAL LAWS.
 	b.	FOR SOFTWARE REQUIRING AN ACTIVATION KEY
 Notwithstanding any damages that You might incur for any reason whatsoever
 (including, without limitation, all damages referenced above and all direct
 or general damages), the entire liability of HP and any of its suppliers under
 any provision of this EULA and Your exclusive remedy for all of the foregoing
 (except for any remedy of repair or replacement if elected by HP with respect
 to any breach of the Limited Warranty) shall be limited to the greater of the
 amount actually paid by You for the Product or U.S. $5.00.  The foregoing
 limitations, exclusions and disclaimers (including Warranty above) shall apply
 to the maximum extent permitted by applicable law, even if any remedy fails of
 its essential purpose.
 REV08/51/03	End User License Agreement
--- a/i386/usr/man/man8/hpssaducli.8.gz
+++ b/i386/usr/man/man8/hpssaducli.8.gz
--- a/i386/usr/sbin/hpssaducli
+++ b/i386/usr/sbin/hpssaducli
@ -0,0 +1,12 @@
 #!/bin/bash
 export HPSSADU_BIN_INSTALLATION_DIR=/opt/hp/hpssaducli/bin/
 if [ '/usr/bin/tty -s' -o "$HPLSPINSTALL" = "TRUE" ]; then
   ${HPSSADU_BIN_INSTALLATION_DIR}hpssaducli $*
 else
   /usr/bin/X11/xterm -T xterm -hold -e ${HPSSADU_BIN_INSTALLATION_DIR}hpssaducli $* 
   if [ "$?" != 0 ]; then
      exec ${HPSSADU_BIN_INSTALLATION_DIR}hpssaducli $* 2>/dev/null|cat > /dev/null
   fi
 fi
		`@ -0,0 +1,2 @@`
							`amd64!hpssaducli!2.40.13.0!hpssaducli-2.40-13.0.x86_64.rpm!https://downloads.linux.hpe.com/SDR/repo/spp/SUSE_LINUX/SLES11-SP4/x86_64/current/hpssaducli-2.40-13.0.x86_64.rpm!361e9ab7557adaaca6e9d814814c0c5b`
							`i386!hpssaducli!2.40.13.0!hpssaducli-2.40-13.0.i386.rpm!https://downloads.linux.hpe.com/SDR/repo/spp/SUSE_LINUX/SLES11-SP4/i386/current/hpssaducli-2.40-13.0.i386.rpm!b1fbc35f51d40874bab360f2a8d9a0c4`