Correct typos

Upstream version 2.20.11.0

amd64/opt/hp/hpssacli/bld/hpssacli-2.20-11.0.x86_64.txt

@@ -1,10 +1,10 @@
-HPE Smart Storage Administrator CLI (HPSSACLI)
+HP Smart Storage Administrator CLI (HPSSACLI)
-Version 2.40-13.0
+Version 2.20-11.0
-11/4/2015
+5/1/2015
 
 Description
 -----------
-The HPE Smart Storage Administrator CLI is the command line-based disk 
+The HP Smart Storage Administrator CLI is the command line-based disk 
 configuration program for Smart Array Controllers. 
 
 * All other product names mentioned herein may be trademarks of their 
@@ -73,8 +73,10 @@ Supported Controllers
   Dynamic Smart Array B140i
   Smart HBA H240 Controller
   Smart HBA H240ar Controller
+  Smart HBA H240tr Controller
   Smart HBA H241 Controller
   Smart HBA H244br Controller
+  Smart Array P240tr Controller
   Smart Array P244br Controller
   Smart Array P246br Controller
   Smart Array P440 Controller
@@ -85,7 +87,7 @@ Supported Controllers
   Smart Array P840ar Controller
   Smart Array P841 Controller
  
-Installing & Running the HPE Smart Storage Administrator
+Installing & Running the HP Smart Storage Administrator
 --------------------------------------------------------------
   Installation:
     HPSSACLI is distributed using Red Hat Package Manager (RPM) packages and
@@ -101,7 +103,7 @@ Installing & Running the HPE Smart Storage Administrator
     name is hpssacli which is located in /usr/sbin.
 
     When attempting to run HPSSACLI on any HP-supported version of Linux, it is
-    highly recommended that you install the latest version of the HPE ProLiant
+    highly recommended that you install the latest version of the HP ProLiant
     Smart Array Controller driver for your intended Linux operating system.
     Drivers may be obtained by clicking on "Support & Drivers" from HP's
     website at:  http://www.hp.com
@@ -135,8 +137,8 @@ Additional Notes
       all SCSI devices on Linux. 
   2.  Do not insert or remove a controller driver module when hpssacli is
       running.
-  3.  Please stop the HPE Storage Agents when deleting logical drives
+  3.  Please stop the HP Storage Agents when deleting logical drives
-      since HPE Storage Agents keeps all logical drives open.
+      since HP Storage Agents keeps all logical drives open.
   4.  If all physical drives on a controller fail or are removed, software keys
       will not be saved to the controller.  
   5.  HPSSACLI may appear unresponsive during heavy array controller I/O
@@ -151,7 +153,7 @@ Additional Notes
       only the first 16 volumes configured will be available to the operating
       system.
   8.  On RHEL5 systems, for this version of the HPSSACLI version 3.6.18-10 or
-      newer of the HPE ProLiant Smart Array Controller Driver for Red Hat
+      newer of the HP ProLiant Smart Array Controller Driver for Red Hat
       Enterprise Linux 5 (x86, x86-64) is required. Drivers may be obtained by
       clicking on "Support & Drivers" from HP's website at:  http://www.hp.com
 

build_orig.sh

@@ -0,0 +1,64 @@
+#!/bin/bash
+# the directory of the script
+DIR=`cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd`
+echo "Working directory $DIR"
+
+# the temp directory used, within $DIR
+WORK_DIR=`mktemp -d -p "$DIR"`
+echo "Creating temp working directory $WORK_DIR"
+
+# deletes the temp directory
+function cleanup {
+  rm -rf "$WORK_DIR"
+  echo "Deleted temp working directory $WORK_DIR"
+}
+
+# register the cleanup function to be called on the EXIT signal
+trap cleanup EXIT
+
+# Download Files specified in files.diz
+while IFS=! read type app version outputfile url md5
+do
+  echo "Downloading $app Version: $version"
+  #use -O for output file. define $outputfile yourself
+  wget --no-check-certificate --tries=1 -O $DIR/../$outputfile --timeout=5 "$url"
+  # use $(..) instead of backticks.
+  calculated_md5=$(md5sum "$DIR/../$outputfile" | cut -f 1 -d " ")
+  # compare md5
+  case "$calculated_md5" in
+    "$md5" )
+      echo "$DIR/../$outputfile md5 ok"
+    ;;
+    *)
+      echo "$DIR/../$outputfile md5 NOT ok"
+      exit 1
+    ;;
+  esac
+done < "$DIR/files.diz"
+
+# Extract to specified dir and set some variables
+while IFS=! read type app version outputfile url md5
+do
+  mkdir -p $WORK_DIR/${app}-${version}/${type}
+  pushd $WORK_DIR/${app}-${version}/${type}
+  rpm2cpio $DIR/../$outputfile | cpio -idmv
+  echo "${app}_${version}.orig.tar.gz" > $WORK_DIR/filename.txt
+  echo "${app}-${version}" > $WORK_DIR/dirname.txt
+  echo "${version}" > $WORK_DIR/version.txt
+  popd
+done < "$DIR/files.diz"
+
+FILENAME=`cat $WORK_DIR/filename.txt`
+DIRNAME=`cat $WORK_DIR/dirname.txt`
+echo "Creating $DIR/../$FILENAME "
+
+pushd $WORK_DIR
+tar -czf $DIR/../$FILENAME $DIRNAME
+popd
+
+VER=`cat $WORK_DIR/version.txt`
+echo "Importing $DIR/../$FILENAME as $VER into git"
+cleanup
+gbp import-orig --pristine-tar -u $VER $DIR/../$FILENAME
+
+exit 0

debian/README.source

@@ -0,0 +1,11 @@
+hpssacli (9.20.9.0-1) unstable; urgency=low
+
+  Sources have been repacked from the following upstream packages:
+
+    a569ddb584d2133bf44f06992d746f51  hpssacli-9.20-9.0.i386.rpm
+    c0d6f57fe3cf1fa6342fb0097e3ae100  hpssacli-9.20-9.0.x86_64.rpm
+
+  Both have been turned into tarballs using alien and then uncompressed to
+  i386 and amd64 sub-directories.
+
+ -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Mon, 20 Aug 2012 19:58:55 +0200

debian/changelog

@@ -0,0 +1,48 @@
+hpssacli (2.20.11.0-2) UNRELEASED; urgency=medium
+
+  * cleanup typos
+
+ -- Mario Fetka <mario@localhost.localdomain>  Thu, 26 May 2016 21:09:53 +0200
+
+hpssacli (2.20.11.0-1) unstable; urgency=low
+
+  * Non-maintainer upload.
+  * Bump to new release
+  * Imported Upstream version 2.0.23.0
+
+ -- Mario Fetka <mario@localhost.localdomain>  Sat, 21 May 2016 07:46:39 +0200
+
+hpssacli (9.20.9.0-1) unstable; urgency=low
+
+  [ Adam Cécile (Le_Vert) ]
+  * New upstream release (Closes: #225).
+  * Now ship amd64 binaries along i386 ones.
+  * Rewrite debian/copyright to use machine readable format.
+
+  [ Mario Fetka ]
+
+ -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Mon, 20 Aug 2012 19:58:55 +0200
+
+hpssacli (8.25.5-1) unstable; urgency=low
+
+  * New upstream release.
+  * Do not depend on libstdc++2.10 anymore because it has been removed
+    from current distros. Ship our own lib (extracted from etch package)
+    in a private directory.
+  * Add upstream changelog.
+  * Fix download url (debian/copyright).
+
+ -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Mon, 27 Apr 2009 15:41:54 +0200
+
+hpssacli (8.10-1) unstable; urgency=low
+
+  * New upstream release.
+  * debian/watch added (url stolen to gentoo).
+
+ -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Tue, 23 Dec 2008 14:39:26 +0100
+
+hpssacli (7.80-1) unstable; urgency=low
+
+  * Initial release.
+
+ -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Wed, 20 Aug 2008 13:41:40 +0200

debian/compat

@@ -0,0 +1 @@
+5

debian/control

@@ -0,0 +1,13 @@
+Source: hpssacli
+Section: non-free/admin
+Priority: optional
+Maintainer: Adam Cécile (Le_Vert) <gandalf@le-vert.net>
+Build-Depends: debhelper (>= 5), sharutils
+Standards-Version: 3.9.3
+
+Package: hpssacli
+Architecture: i386 amd64
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: HP command line SmartArray configuration utility
+ This is the proprietary command line utility from HP to manage HP/Compaq
+ SmartArray hardware RAID HBAs mostly found in Proliant servers.

debian/copyright

@@ -0,0 +1,361 @@
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: hpacucli
+Source: http://h20000.www2.hp.com/bizsupport/site/search/r4_0/jsp/search.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=468780&tx=hpacucli&sc=2&cf=1&rf=1&lkc=1&lk=1&sts=1&nh=10
+
+Files: *
+Copyright: Copyright (C) 1988-1991 COMPAQ Computer Corporation
+License: Proprietary
+ PROLIANT ESSENTIALS SOFTWARE
+ .
+ 		END USER LICENSE AGREEMENT
+ .
+ PLEASE READ THIS END USER LICENSE AGREEMENT ("AGREEMENT") CAREFULLY.  THIS
+ AGREEMENT IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR SINGLE
+ ENTITY) ("YOU") AND HEWLETT-PACKARD COMPANY ("HP").  BY CLICKING THE "AGREE"
+ BUTTON BELOW, COPYING, INSTALLING, OR OTHERWISE USING THE SOFTWARE,
+ (i) YOU DO SO WITH THE INTENT TO ELECTRONICALLY "EXECUTE" THIS AGREEMENT, AND
+ (ii) YOU AGREE TO BE BOUND BY AND COMPLY WITH THE FOLLOWING TERMS AND
+ CONDITIONS, INCLUDING THE WARRANTY STATEMENT, AS WELL AS ANY TERMS AND
+ CONDITIONS CONTAINED IN THE "ANCILLARY SOFTWARE" LIST.
+ .
+ IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT,
+ (A) IF THIS AGREEMENT IS DISPLAYED ELECTRONICALLY, YOU MAY INDICATE REJECTION
+     OF THIS AGREEMENT BY CLICKING THE "DISAGREE" BUTTON;
+ (B) YOU SHALL NOT INSTALL THE SOFTWARE; AND
+ (C) HP DOES NOT GRANT YOU ANY RIGHTS TO USE THE SOFTWARE.
+ NOTWITHSTANDING THE FOREGOING, INSTALLING OR OTHERWISE USING THE SOFTWARE
+ INDICATES YOUR ACCEPTANCE OF THE TERMS AND CONDITIONS OF THIS AGREEMENT.
+ IF YOU PURCHASED THE SOFTWARE, YOU MAY RETURN THE SOFTWARE TO THE PLACE OF
+ PURCHASE FOR A FULL REFUND.
+ .
+ THE SOFTWARE PROVIDED HEREIN, IS PROVIDED BY HP AND BY THIRD PARTIES, INCLUDING
+ THE OPEN SOURCE COMMUNITY ("ANCILLARY SOFTWARE").  USE OF THE HP SOFTWARE, THE
+ ANCILLARY SOFTWARE, ACCOMPANYING PRINTED MATERIALS, AND THE "ONLINE" OR
+ ELECTRONIC DOCUMENTATION (COLLECTIVELY THE "PRODUCT") IS CONDITIONED UPON AND
+ LIMITED BY THE FOLLOWING TERMS AND CONDITIONS, INCLUDING THE "AS IS WARRANTY
+ STATEMENT" AND THE TERMS AND CONDITIONS OF THE ANCILLARY SOFTWARE LICENSE
+ AGREEMENTS ("ANCILLARY SOFTWARE LICENSES").
+ .
+ USE OF ANCILLARY SOFTWARE SHALL BE GOVERNED BY THE ANCILLARY SOFTWARE LICENSE,
+ EXCEPT THAT THE DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITIES
+ PROVISIONS CONTAINED IN THE "AS-IS WARRANTY STATEMENT" OF THIS AGREEMENT SHALL
+ ALSO APPLY TO SUCH ANCILLARY SOFTWARE.  HP HAS IDENTIFIED ANCILLARY SOFTWARE
+ BY EITHER NOTING THE ANCILLARY SOFTWARE PROVIDER"S OWNERSHIP WITHIN EACH
+ ANCILLARY SOFTWARE PROGRAM FILE AND/OR BY PROVIDING LICENSING INFORMATION IN
+ THE "ANCILLARY SOFTWARE" LIST. BY ACCEPTING THE TERMS AND CONDITIONS OF THIS
+ AGREEMENT, YOU ARE ALSO ACCEPTING THE TERMS AND CONDITIONS OF EACH ANCILLARY
+ SOFTWARE LICENSE IN THE ANCILLARY SOFTWARE LIST.
+ .
+ IF AND ONLY IF THE PRODUCT INCLUDES SOFTWARE LICENSED UNDER THE GNU GENERAL
+ PUBLIC LICENSE ("GPL SOFTWARE"), YOU MAY OBTAIN A COMPLETE MACHINE-READABLE
+ COPY OF THE GPL SOFTWARE SOURCE CODE ("GPL SOURCE CODE") BY DOWNLOAD FROM A
+ SITE SPECIFIED IN THE FOLLOWING HP WEBSITE:
+ HTTP://H18004.WWW1.HP.COM/PRODUCTS/SERVERS/PROLIANTESSENTIALS/VALUEPACK/LICENSING.HTML.
+ UPON YOUR WRITTEN REQUEST, HP WILL PROVIDE, FOR A FEE COVERING THE COST OF
+ DISTRIBUTION, A COMPLETE MACHINE-READABLE COPY OF THE GPL SOURCE CODE, BY MAIL,
+ TO YOU.  INFORMATION ABOUT HOW TO MAKE A WRITTEN REQUEST FOR GPL SOURCE CODE
+ MAY BE FOUND AT THE FOLLOWING WEBSITE:
+ HTTP://H18004.WWW1.HP.COM/PRODUCTS/SERVERS/PROLIANTESSENTIALS/VALUEPACK/LICENSING.HTML .
+ .
+ .
+ LICENSE TERMS
+ .
+ SUBJECT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT AND ANY RIGHTS,
+ LIMITATIONS AND OBLIGATIONS SET FORTH IN THE ANCILLARY SOFTWARE LICENSES:
+ .
+ 1.	LICENSE GRANT
+ .
+ a.	IF SOFTWARE DOES NOT REQUIRE AN ACTIVATION KEY.  If the Software does
+ not require an Activation Key and provided that You comply with all the terms
+ and conditions of this Agreement, HP grants You a non-exclusive,
+ non-transferable (except as provided in Section 16), worldwide (except for the
+ countries referenced  in Section 12) license under HP's copyrights, to install,
+ copy on as many computers as you need for your business, use, execute, make
+ archival or backup copies, and display ("Use") the object code version of the
+ Product on the computer(s) on which this Product is installed and in the
+ operating environment as identified by HP in the accompanying materials.
+ .
+ b.	IF SOFTWARE REQUIRES AN ACTIVATION KEY.  If the Software requires an
+ Activation Key, and provided that You comply with all terms and conditions of
+ this Agreement, then depending upon the specific hardware configuration You
+ employ, HP grants You the following license  ("License Type") and rights:
+ .
+ 	Authorized Copies.  You are licensed to install, make Authorized Copies
+ of (as defined in this section), execute, and display ("Use") the object code
+ version of the Product on an equivalent number of Computers, Host/Client Pairs,
+ Computer Nodes, or Clustered Computers (as defined in the table below) as you
+ have Authorized Copies.  Authorized Copies is defined as the number of copies
+ that you have paid for as stated in the invoice or comparable document
+ evidencing an authorized quantity.
+ .
+ LICENSE TYPE 	SOFTWARE INSTALLS TO:		LICENSED RIGHTS
+ 		(hardware configuration)
+ ------------------------------------------------------------------------------
+ Computer	A computer 			You have a right to install
+ 						and Use the Product on a single
+ 						computer. The installed copy
+ 						may not be transferred to or
+ 						used on any other computer.
+ .
+ ------------------------------------------------------------------------------
+ Node/Client	A set of computers with a	You have a right to install and
+ 		minimum of one host and one	Use the Product on a Host/Client
+ 		client connected to each	Pair or a Single Node.  Copies
+ 		other ("Host/Client Pair"),	of the Product installed on a
+ 		or in certain instances, a	Host/Client Pair or Single Node
+ 		single computer			may not be transferred to any
+ 		("Single Node")			other host or client computers
+ 						or other single nodes. You can
+ 						continue to Use the Product on
+ 						licensed clients when a new
+ 						server is introduced to the
+ 						licensed clients.
+ .
+ ------------------------------------------------------------------------------
+ Cluster		More than two computers		You have a right to install and
+ 		physically connected together	Use the Product on each
+ 		in a cluster configuration	Clustered Computer. The
+ 		(each of which is referred to	installed copy may not be
+ 		as "Clustered Computer")	transferred to or used on any
+ 						other computer.
+ .
+ 	Storage.  You may copy the Product into the local memory or storage
+ device of the hardware configuration loaded with the Authorized Copies. You may
+ copy the Product onto a reasonable number of network servers or a secure
+ intranet for the sole purpose of distributing the Product to the Computers,
+ Host/Client Pairs, Computer Nodes, or Clustered Computers.  You may make
+ archival or back-up copies of the Product. You shall keep the activation key
+ with the hardware configuration to which the activation key is licensed. You
+ should keep copies of the activation key information for future retrieval
+ purposes.
+ .
+ 2.	 NEW RELEASES.  "New Release" means a release of the Product that may
+ contain fixes, corrections, or minor improvements to the Product.  New Releases
+ are distributed from time to time solely at the option of HP.  If HP offers a
+ New Release, it may come with its own terms and conditions, however if it does
+ not, You may use the New Release only under the terms and conditions of this
+ Agreement.
+ 3.	NEW VERSIONS.  "New Version" means a version of the Product that may
+ contain significant changes, enhancements, and/or functional improvements to
+ the Product.  New Versions are distributed solely at the option of HP.  If HP
+ offers a New Version, it may come with its own terms and conditions, however
+ if it does not, You may use the New Version only under the terms and conditions
+ of this Agreement.
+ 4.	OWNERSHIP.   The Product is owned and copyrighted by Hewlett-Packard
+ Development Company, L.P., HP's intellectual property management company, and
+ by third party suppliers, except for the Ancillary Software, which is owned and
+ copyrighted by the Ancillary Software providers indicated in the ANCILLARY
+ SOFTWARE list.  Your right to Use the Product confers no title or ownership and
+ is not a sale of the Product or any part thereof.  Third party suppliers and
+ Ancillary Software providers are intended beneficiaries under this Agreement
+ and may protect their rights in their respective portions of the Product
+ directly against You.
+ 5.	TRANSFER. Without the prior written consent of HP, or unless
+ specifically permitted in the Ancillary Software License,  You have no right
+ (a) to rent, lease, lend, or otherwise transfer the rights to the Product to
+ anyone else; (b) to Use the Product for commercial timesharing or bureau use;
+ or (c) to copy the Product onto any public or distributed network.
+ 6.	 COPYRIGHT.  United States copyright laws, other countries' copyright
+ laws, and international treaty provisions protect the Product.  You shall not
+ remove any product identification, copyright notices, or proprietary notices
+ from the Product.
+ 7.	SUPPORT.  Support terms and conditions and contact information are
+ detailed in the Worldwide Limited Warranty and Technical Support for Industry
+ Standard Server Products statement ("Support Statement"), a copy of which is
+ available on the HP web site at www.hp.com.  Subject to the terms of the
+ Support Statement, for HP software products installed on HP computers,
+ technical support for questions regarding media and Product installation may
+ be available for a ninety (90) day period from the date of purchase of the HP
+ computer on which this Product is installed ("Support Term").  To access this
+ support in North America, call the HP Technical Support Phone Center at
+ 1-800-652-6672.  This service is available during normal business hours,
+ Monday through Friday, during the Support Term.  Outside North America, call
+ the nearest HP Technical Support Center.  No other support, including
+ without limitation any on-site support, is provided under this Agreement.
+ 8.	LIMITATION ON REVERSE ENGINEERING.  Reverse engineering of Ancillary
+ Software shall be governed by its respective Ancillary Software License. As
+ for the remainder of the Product, You shall not modify, disassemble, reverse
+ engineer, decompile, decrypt, or otherwise attempt to access or determine the
+ source code of the Product without HP's prior written consent.  Where You have
+ other statutory rights with regard to software, You shall provide HP with
+ reasonably detailed information regarding any intended disassembly or
+ decompilation of the Product prior to performing such disassembly or
+ decompilation.  You shall not decrypt the Product unless necessary for the
+ licensed Use of the Product.
+ 9.	RESERVATION OF RIGHTS.  HP, its third party suppliers, and Ancillary
+ Software providers reserve all rights not expressly granted to You in this
+ Agreement.
+ 10.	TERM AND TERMINATION.  You may exercise the rights of this Agreement
+ and of the Ancillary Software Licenses for a period of time starting at Your
+ acceptance of the terms and conditions of this Agreement and for so long as
+ You meet such terms and conditions ("Term").  Notwithstanding the foregoing,
+ HP may terminate Your right to Use the Product, upon notice, for Your failure
+ to comply with any such term or condition.  Immediately upon termination, You
+ shall remove, destroy, or return to HP all copies of the Product, including
+ those copies of the Product that are merged into Your adaptations, except for
+ individual pieces of data in Your database.  With HP's prior written consent,
+ one copy of the Product may be retained, for archival purposes only, subsequent
+ to termination.  You may terminate this Agreement at any time by returning or
+ destroying the Product together with merged portions in any form.
+ 11.	CONFIDENTIAL COMPUTER SOFTWARE.  Valid license from HP required for
+ possession, use, or copying.  Consistent with FAR 12.211 and 12.212, Commercial
+ Computer Software, Computer Software Documentation, and Technical Data for
+ Commercial Items are licensed to the U.S. Government under vendor's standard
+ commercial license.
+ 12.	COMPLIANCE WITH LAW.  The Product and any associated hardware,
+ software, technology or services may not be exported, reexported, transferred
+ or downloaded to persons or entities listed on the U.S. Department of Commerce
+ Denied Persons List, Entity List of proliferation concern, or on any U.S.
+ Treasury Department Designated Nationals exclusion list, any country under
+ U.S. economic embargo, or to parties directly or indirectly involved in the
+ development or production of nuclear, chemical, biological weapons or in
+ missile technology programs as specified in the U.S. Export Administration
+ Regulations (15 CFR 744).  By accepting this Agreement You confirm that You
+ are not (i) located in (or a national resident of) any country under U.S.
+ economic embargo, (ii) identified on any U.S. Department of Commerce Denied
+ Persons List, Entity List or Treasury Department Designated Nationals exclusion
+ list, and (iii) directly or indirectly involved in the development or
+ production of nuclear, chemical, biological weapons or in missile technology
+ programs as specified in the U.S. Export Administration Regulations.
+ 13.	APPLICABLE LAW. This Agreement shall be construed in accordance with
+ the laws of the State of Texas, without regard to conflict of laws principles.
+ The United Nations Convention on Contracts for the International Sale of Goods
+ is specifically disclaimed.  If the Product was acquired outside the United
+ States, then local law may apply.
+ 14.	SEVERABILITY.  If any term or provision of this Agreement is determined
+ to be illegal or unenforceable, the validity or enforceability of the remainder
+ of the terms or provisions herein will remain valid and in full force and
+ effect. Failure or delay in enforcing any right or provision of this Agreement
+ shall not be deemed a waiver of such right or provision with respect to any
+ subsequent breach. Provisions herein, which by their nature extend beyond the
+ termination of the license in the Product, will remain in effect until
+ fulfilled.
+ 15.	CONSENT TO USE OF DATA. You agree that HP may collect and use technical
+ information that You provide in connection with Your Use and request for
+ technical support of the Product from HP, however, HP will not use this
+ information in a form that personally identifies You.
+ 16.	ASSIGNMENT.  You may not assign, sublicense or transfer this Agreement,
+ the Product, or any rights or obligations hereunder without the prior written
+ consent of HP.  Any such attempted assignment, sublicense, or transfer will be
+ null and void, and in such event, HP may terminate this Agreement immediately.
+ Notwithstanding the foregoing, You may assign this Agreement and the rights
+ granted hereunder with the transfer of all or substantially all of Your
+ business.  The right to assign or transfer Ancillary Software is governed by
+ the terms and conditions of the Ancillary Software Licenses.
+ 17.	ENTIRE AGREEMENT.  This Agreement, including all Ancillary Software
+ Licenses in the ANCILLARY SOFTWARE list, is the final, complete and exclusive
+ agreement between You and HP relating to the Product, and supersedes any
+ previous communications, representations, or agreements between the parties,
+ whether oral or written, regarding the subject matter hereof.  Any additional
+ or different terms and conditions not expressly set forth herein will not
+ apply.  This Agreement may not be changed except by an amendment signed by an
+ authorized representative of both You and HP.  To the extent the terms of any
+ HP policies or programs for support services conflict with the terms of this
+ Agreement, the terms of this Agreement shall control.
+ 18.	WARRANTY
+ .
+ 	a.	NO ACTIVATION KEY REQUIRED SOFTWARE - AS-IS WARRANTY STATEMENT:
+ .
+ 	DISCLAIMER.  TO THE EXTENT ALLOWED BY APPLICABLE LAW, THIS PRODUCT AND
+ SUPPORT SERVICES, IF ANY, ARE PROVIDED TO YOU "AS IS" WITHOUT WARRANTIES OF
+ ANY KIND, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED.  HP SPECIFICALLY
+ DISCLAIMS ANY IMPLIED WARRANTIES OF ANY KIND, INCLUDING WITHOUT LIMITATION,
+ WARRANTY OF MERCHANTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT, TITLE,
+ ACCURACY OF INFORMATIONAL CONTENT, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY
+ OR COMPLETENESS OF RESPONSES, RESULTS, OR WORKMANLIKE EFFORT, LACK OF VIRUSES,
+ AND LACK OF NEGLIGENCE, ALL WITH REGARD TO THE PRODUCT, AND THE PROVISION OF
+ OR FAILURE TO PROVIDE SUPPORT SERVICES.  IN ADDITION, WITHOUT LIMITATION,
+ THERE IS NO WARRANTY OF QUIET ENJOYMENT, QUIET POSSESSION AND CORRESPONDENCE
+ TO DESCRIPTION WITH REGARD TO THE PRODUCT.  YOU ASSUME THE ENTIRE RISK AS TO
+ THE RESULTS AND PERFORMANCE OF THE PRODUCT.  NO ORAL OR WRITTEN INFORMATION OR
+ ADVICE GIVEN BY HP, HP"S AUTHORIZED REPRESENTATIVES, OR ANY OTHER PARTY SHALL
+ CREATE A WARRANTY OR AMEND THIS "AS IS" WARRANTY.  Some jurisdictions do not
+ allow exclusions of implied warranties or conditions, so the above exclusion
+ may not apply to You to the extent prohibited by such local laws. You may have
+ other rights that vary from country to country, state to state, or province to
+ province.
+ .
+ 	b.	ACTIVATION KEY REQUIRED SOFTWARE - LIMITED WARRANTY.
+ .
+ HP warrants that the Product will perform substantially in accordance with the
+ accompanying materials for a period of ninety (90) days from the date of
+ purchase.  If an implied warranty or condition is created by Your
+ state/jurisdiction and federal or state/provincial law prohibits disclaimer of
+ it, You also have an implied warranty or condition, BUT ONLY AS TO DEFECTS FOR
+ WHICH CLAIMS ARE MADE WITHIN NINETY (90) DAYS FROM THE DATE OF PURCHASE. AS TO
+ ANY DEFECTS DISCOVERED FOR WHICH A CLAIM IS NOT MADE WITHIN THE NINETY-DAY
+ PERIOD, THERE IS NO WARRANTY OR CONDITION OF ANY KIND.
+ Some states/jurisdictions do not allow limitations on how long an implied
+ warranty or condition lasts, so the above limitation may not apply to You.
+ .
+ 	DISCLAIMER.  The Limited Warranty that appears above is the only
+ express warranty made to You and is provided in lieu of any other express
+ warranties or implied warrantees (if any) created by any documentation,
+ packaging or otherwise.  EXCEPT FOR THE LIMITED WARRANTY, AND TO THE MAXIMUM
+ EXTENT PERMITTED BY APPLICABLE LAW, HP AND ITS SUPPLIERS PROVIDE THE PRODUCT
+ AND SUPPORT SERVICES (IF ANY) "AS IS" AND WITH ALL FAULTS, AND HEREBY DISCLAIM
+ ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS, IMPLIED OR STATUTORY,
+ INCLUDING, BUT NOT LIMITED TO, ANY (IF ANY) IMPLIED WARRANTIES, DUTIES OR
+ CONDITIONS OF MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE,
+ SATISFACTORY QUALITY, NON-INFRINGEMENT OF TITLE, OF ACCURACY OR COMPLETENESS
+ OF RESPONSES, OF RESULTS, OF WORKMANLIKE EFFORT, OF LACK OF VIRUSES, AND OF
+ LACK OF NEGLIGENCE, ALL WITH REGARD TO THE PRODUCT, AND THE PROVISIONS OF OR
+ FAILURE TO PROVIDE SUPPORT SERVICES.  ALSO, THERE IS NO WARRANTY OR CONDITION
+ OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, CORRESPONDENCE TO DESCRIPTION,
+ OR NON-INFRINGEMENT WITH REGARD TO THE PRODUCT.
+ .
+ 19.	LIMITATION OF LIABILITY.
+ .
+ 	a.	 FOR ALL SOFTWARE WHETHER OR NOT AN ACTIVATION KEY IS REQUIRED
+ .
+ EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL HP OR ITS
+ SUBSIDIARIES, AFFILIATES, DIRECTORS, OFFICERS, EMPLOYEES, AGENTS OR SUPPLIERS
+ BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE,
+ OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS) ARISING
+ OUT OF THE USE, THE INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT,
+ WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER
+ OR NOT HP WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  THE PRODUCT IS NOT
+ DESIGNED, MANUFACTURED OR INTENDED FOR USE IN THE PLANNING, CONSTRUCTION,
+ MAINTENANCE, OR OPERATION OF A NUCLEAR FACILITY, AIRCRAFT NAVIGATION OR
+ AIRCRAFT COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, LIFE SUPPORT MACHINES,
+ OR WEAPONS SYSTEMS (COLLECTIVELY "HIGH RISK APPLICATIONS").  YOU ARE SOLELY
+ LIABLE IF THE PRODUCT IS USED FOR HIGH RISK APPLICATIONS, AND YOU SHALL
+ INDEMNIFY, DEFEND AND HOLD HP HARMLESS FROM ALL LOSS, DAMAGE, EXPENSE OR
+ LIABILITY IN CONNECTION WITH SUCH USE.   YOU ASSUME THE ENTIRE RISK AS TO YOUR
+ USE OF THE PRODUCT.  SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
+ LIMITATION OF LIABILITY FOR INCIDENTIAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
+ LIMITATION MAY NOT APPLY TO YOU TO THE EXTENT PROHIBITED BY SUCH LOCAL LAWS.
+ .
+ 	b.	FOR SOFTWARE REQUIRING AN ACTIVATION KEY
+ .
+ Notwithstanding any damages that You might incur for any reason whatsoever
+ (including, without limitation, all damages referenced above and all direct
+ or general damages), the entire liability of HP and any of its suppliers under
+ any provision of this EULA and Your exclusive remedy for all of the foregoing
+ (except for any remedy of repair or replacement if elected by HP with respect
+ to any breach of the Limited Warranty) shall be limited to the greater of the
+ amount actually paid by You for the Product or U.S. $5.00.  The foregoing
+ limitations, exclusions and disclaimers (including Warranty above) shall apply
+ to the maximum extent permitted by applicable law, even if any remedy fails of
+ its essential purpose.
+ .
+ REV08/51/03	End User License Agreement
+
+Files: debian/*
+Copyright: Copyright (C) 2008-2012 Adam Cécile (Le_Vert)
+License: GPL-2.0+
+ This package is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+ .
+ This package is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>
+ .
+ On Debian systems, the complete text of the GNU General
+ Public License version 2 can be found in "/usr/share/common-licenses/GPL-2".

debian/dirs

@@ -0,0 +1,2 @@
+usr/sbin
+usr/lib/hpssacli

debian/docs

@@ -0,0 +1 @@
+i386/opt/hp/hpssacli/bld/hpssacli-*.txt

debian/hpssacli.wrapper

@@ -0,0 +1,6 @@
+#!/bin/sh
+#
+# This file is public domain.
+
+export LD_LIBRARY_PATH=/usr/lib/hpssacli:$LD_LIBRARY_PATH
+/usr/lib/hpssacli/hpssacli.real $@

debian/hpssascripting.wrapper

@@ -0,0 +1,6 @@
+#!/bin/sh
+#
+# This file is public domain.
+
+export LD_LIBRARY_PATH=/usr/lib/hpssacli:$LD_LIBRARY_PATH
+/usr/lib/hpssacli/hpssascripting.real $@

debian/rules

@@ -0,0 +1,58 @@
+#!/usr/bin/make -f
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+DESTDIR = $(CURDIR)/debian/hpssacli
+DEB_BUILD_ARCH  ?= $(shell dpkg-architecture -qDEB_BUILD_ARCH)
+
+build: build-arch build-indep
+build-arch:
+build-indep:
+
+clean:
+	dh_testdir
+	dh_testroot
+	dh_clean
+
+install:
+	dh_testdir
+	dh_testroot
+	dh_clean -k
+	dh_installdirs
+ifeq ($(DEB_BUILD_ARCH),i386)
+	install -D -m 755 $(CURDIR)/i386/opt/hp/hpssacli/bld/hpssacli \
+		$(DESTDIR)/usr/lib/hpssacli/hpssacli.real
+	install -D -m 755 $(CURDIR)/i386/opt/hp/hpssacli/bld/hpssascripting \
+		$(DESTDIR)/usr/lib/hpssacli/hpssascripting.real
+endif
+ifeq ($(DEB_BUILD_ARCH),amd64)
+	install -D -m 755 $(CURDIR)/amd64/opt/hp/hpssacli/bld/hpssacli \
+		$(DESTDIR)/usr/lib/hpssacli/hpssacli.real
+	install -D -m 755 $(CURDIR)/amd64/opt/hp/hpssacli/bld/hpssascripting \
+		$(DESTDIR)/usr/lib/hpssacli/hpssascripting.real
+endif
+	install -D -m 755 $(CURDIR)/debian/hpssacli.wrapper \
+		$(DESTDIR)/usr/sbin/hpssacli
+	install -D -m 755 $(CURDIR)/debian/hpssascripting.wrapper \
+		$(DESTDIR)/usr/sbin/hpssascripting
+
+binary-indep: build install
+binary-arch: build install
+	dh_testdir
+	dh_testroot
+	dh_installchangelogs debian/upstream_changelog
+	dh_installdocs
+	dh_installman
+	dh_link
+	dh_strip
+	dh_compress
+	dh_fixperms
+	dh_installdeb
+	dh_shlibdeps -l$(DESTDIR)/usr/lib/hpssacli/
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install

debian/source/format

@@ -0,0 +1 @@
+1.0

debian/upstream_changelog

@@ -0,0 +1,336 @@
+Version: 9.10.22.0  (4 Jun 2012)
+  Enhancements
+    - Added support for the following controllers: 
+      * HP Dynamic Smart Array B120i
+      * HP Dynamic Smart Array B320i
+      * HP Smart Array P822
+    - Now officially supporting and providing native X64 versions in addition
+      to existing 32 bit versions
+    - Added new features requiring a valid SAAP 2.0 (Smart Array Advanced Pack) license key:
+      * Replace Array:
+        Allows the transfer of contents of an array to an existing empty
+        array or a new array. All logical drives from the source array will
+        be transferred. The original array will be deleted and its data
+        drives  will be freed as unassigned drives. The drive types at source
+        and destination arrays can be different. This allows moving data from
+        SATA to SAS, or SAS to SATA.  However, the drive types comprising the
+        array must still be of the same type.
+      * Heal Array:
+        Allows the replacement of failed or degraded physical drives in an
+        array with healthy physical drives. The original array and logical
+        drive numbering will be unaffected after the replacement. The
+        replacement physical drives must be of the same interface type (such
+        as SAS, SATA and etc.) as the original drives. The operation will be
+        available only if enough unassigned physical drives of the correct
+        size are available.
+ 
+Version: 9.0.24.0  (27 Mar 2012)
+  Enhancements
+    - Added support for the following controllers:
+      * HP Smart Array P222
+      * HP Smart Array P420
+      * HP Smart Array P421
+      * HP Smart Array P220i
+      * HP Smart Array P420i
+    - Added support for the following features/devices:
+      * Smart Array Advanced Pack 2.0 (SAAP 2.0):
+        SAAP 2.0 provides full SAAP 1.0 feature functionality with the
+        following additions:
+          - RAID 1/10 Advanced Data Mirroring (ADM)
+          - Moving and Deleting of Individual Logical Volumes
+          - Move operation now supports SATA to SAS, SAS to SATA
+          - Predictive Spare Activation
+          - > 128 physical drives
+          - SmartSSD Wear Gauge
+          - Updated Cache Ratio settings
+          - Additional Strip Sizes - 512, 1024 on supported controllers and
+            configurations
+          - Device Temperatures - Controllers, Capacitors, Cache Modules, and
+            Hard Drives
+          - Overall Performance improvements
+          - 3 TB physical drives
+
+Version: 8.75-12.0  (22 Jun 2011)
+  Enhancements
+    - *** New ***
+      Starting with versions 8.75.12.0, an Offline version of ACU is
+      available from http://www.hp.com/ that allows users to boot directly
+      into the configuration and maintenance utilities prior to any Host OS
+      loading or being installed.
+      .
+      This new deliverable of ACU is available for download through normal
+      software methods (such as searching by Server model, OS, or device) or
+      by searching for 'HP ProLiant Offline Array Configuration Utility'
+    - SmartSSD Wear Gauge
+      This feature is accessible through the ssdinfo command in ACUCLI
+      Example code:
+        <target> show ssdinfo [detail|summary]
+        Provides a summary for solid state drives for the specified controller(s)
+        The target can be any valid controller/device
+        controller slot=1 show sddinfo
+        controller all show ssdinfo
+        controller all show ssdinfo detail
+        controller all show ssdinfo summary
+    - Greater than 2.2 TB Hard Drives
+
+Version: 8.70-8.0  (11 Mar 2011)
+  Enhancements
+    - Improved speed of Diagnostic report generation
+    - Supported serial logs included in the zip file of the Diagnositc
+      reports, when applicable
+    - New options available during creation of logical drive size
+    - Now showing current and max temperatures for physical drives
+    - Support for failed array controllers.  The "ctrl all show" command will
+      list any locked up controllers along with valid controllers. For failed
+      controllers, a message will display explaining its state along with a
+      lockup code, if applicable
+    - Support for "-h" and "-help" commandline option
+    - HPACUSCRIPTING updates:
+      * Will not display array accelerator info in capture files for
+        controllers which do not have cache or the cache is not configurable.
+        Attempting to set the array accelerator on these controllers will
+        result in a warning message (not an error)
+      * Support for logical drive command "Size=MAXMBR". This option creates
+        the largest possible volume in an array with the maximum size
+        constrained by the limits of the 32bit MBR
+      * New keyword, SIZEBLOCKS. Input scripts can now specify size as before
+        using SIZE (size in MB) or SIZEBLOCKS (size in 512 byte blocks) but
+        not both
+      * Now displays the disk interface type in the comment section for physical
+        disks.
+
+Version: 8.61-1.0  (8 Feb 2011)
+  Fixes
+    - In version 8.60-8.0 of HPACUCLI, using the "show or detail commands" on
+      any target that includes physical drives can cause the application to
+      exit if one or more of the included physical drives are in a failed
+      state.
+      This release, 8.61-1.0, corrects this problem and allows the command to
+      complete successfully.
+
+Version: 8.60-8.0  (10 Sep 2010)
+  Enhancements
+    - Overall Performance improvements
+      * HPACUCLI as well as in HPACUSCRIPTING 
+    - Surface Scan Analysis enhancements
+      * Disable
+      * High
+      * Idle
+
+Version: 8.50-6.0  (28 May 2010)
+  Enhancements
+    - Overall Performance improvements
+    - Physical drives in a SMART state are allowed to be used at user's
+      discretion
+    - Diagnostic Report additions:
+      * Parity group information for RAID 50 and RAID 60 logical drives
+      * Information for SEP devices and Expanders
+      * Updated Storage Enclosure names
+    - Applicable only with the appropriate SAAP License Key installed:
+      * The Move Array operation now allows the user to move an array to
+        physical drives that are smaller than the original physical drives,
+        provided that all the data in the existing logical drives will fit
+        into the new array
+          * The new drive set must have the same number of physical drives as
+            the existing drive set
+    - Added SEP devices and Expanders to "ctrl slot=X show config" and "ctrl
+      slot=X show config detail" commands
+    - Added an "OS Status" for logical drives to indicate if it is "locked"
+      by the OS
+    - Added display of Hardware Revision info for SAS Expander boards
+      * "<target> enclosure all show detail" should be used in order to see
+        the field displayed
+    - Added support for being able to run ACUCLI in non-interactive mode for
+      read-only commands (show) even if ACU is running. For example:
+        # hpacucli ctrl all show
+        # hpacucli ctrl slot=1 pd all show status
+    - Added "exitonerror" feature which allows the application to exit upon
+      encountering any error during execution of a command. This feature is
+      useful for scripts invoking ACUCLI and the feature will allow scripts
+      to know that an error has occurred.
+        * The setting can also be invoked from the console as an application switch
+          Example:  "hpacucli -exitonerror < myscript.txt"
+        * set [exitonerror=enable|disable]
+          Allows a script to decide whether an error encountered during execution
+        * show exitonerror
+          Displays the current exitonerror setting 
+     - Added enclosure show support
+       * enclosure [ all | port:box | serialnumber=xxxx ] show [ detail |
+         status]
+         Outputs the storage enclosure information The target can be any
+         valid storage enclosure
+         Examples:
+           * controller slot=5 enclosure all show
+           * controller slot=5 enclosure 4E:1 show detail
+           * controller slot=5 enclosure serialnumber=UAB123456 show status
+    - Added support for the 'show' command to display devices in a logical or
+      physical format similar to the support in ACU (GUI) 
+      * set [view=logical|physical]
+        - Allows the user to select whether certain show commands display the
+          output using a logical or physical view
+        - Logical view displays devices using their association with arrays
+        - Physical view displays the devices such as physical drives
+          according to their relationship with their storage enclosures
+        - The default value is logical view
+      * show view
+        - Displays the current view setting.
+      * Examples:
+        set view=physical
+        show view
+    - Added the capability to run multiple commands in command line mode
+      (non-interactive)
+      * The semicolon (";") is used as a delimiter between commands
+      * For example:
+        On LINUX, the semicolon must be escaped or in quotes
+        hpacucli "ctrl slot=1 show; ctrl slot=1 modify
+        drivewritecache=enable; ctrl slot=1 show"
+    - HPACUSCRIPTING Additions:
+      * Now shows an expanded usage message when invalid command line
+        arguments are provided
+      * Added feature to allow RAID=RAID1 for >2 disk mirrors. This 
+        allows backwards compatibility with "old" cpqacuxe scripting. Capture
+        will still output correct RAID level
+      * Added AUTO as a valid option for QUEUEDEPTH
+      * Overall Performance improvements
+      * Added Controller=FIRST support. Controllers are now sorted in capture
+        files in slot ascending order
+      * Added additional controller information to errors and warnings to
+        better identify where problems occur in an input file
+
+Version: 8.40-4.0  (25 Feb 2010)
+  Enhancements
+    - Support for Smart Array P812
+ 
+Version: 8.35-7.0  (28 Sep 2009)
+  Enhancements
+    - Changes for HPACUCLI 8.35.X.X:
+      * Now supports command line history and tab completion
+ 
+Version: 8.30-5.0  (14 Sep 2009)
+  Enhancements
+    - Changes for HPACUCLI 8.30.X.X:
+      * Enclosure View
+ 
+Version: 8.28-13.0  (6 May 2009)
+  Enhancements
+    - Changes for HPACUCLI 8.28.X.X:
+      * Command Line Diagnostics (ADUCLI) is now integrated with HPACUCLI
+      * Scripting for captures and inputs is now intergrated with HPACUCLI
+        This support was previously delivered with ACU
+        The scripting command has changed from cpqacuxe to hpacuscripting
+
+Version: 8.25.5  (19 Feb 2009)
+  Enhancements
+    - Added Support for the following Controllers:
+      * Smart Array P212
+      * Smart Array P212 ZMR
+      * Smart Array P410
+      * Smart Array P410 ZMR
+      * Smart Array P410i
+      * Smart Array P410i ZMR
+      * Smart Array P411
+      * Smart Array P411 ZMR
+      * Smart Array B110i SATA RAID
+   - Additionally, added support for Advanced Pack
+
+Version: 8.20.18  (23 Jan 2009)
+  Enhancements
+    - Added Support for the following Controllers:
+      * Smart Array P212
+      * Smart Array P212 ZMR
+      * Smart Array P410
+      * Smart Array P410 ZMR
+      * Smart Array P411
+      * Smart Array P411 ZMR
+    - Additionally, added support for Smart Array Advanced Pack
+
+Version: 8.10.2  (6 Jun 2008)
+  Fixes
+    - Fixed an issue related to an incorrect Background Parity Initialization
+      status being displayed for RAID 5 and RAID 6 Logical Drives
+
+Version: 8.0.14  (26 Feb 2008)
+  Enhancements
+    - Added Dual Domain Support for the HP Smart Array P800 Controller
+    - Added 512K Stripe Size for RAID 5 (only on the following controllers
+      with minimum FW 5.00):
+        * Smart Array E500
+        * Smart Array P400/400i
+        * Smart Array P800
+
+Version: 7.85.18  (24 Jul 2007)
+  Enhancements
+    - Enabled drive write cache for all SAS controllers
+
+Version: 7.80.6  (27 Apr 2007)
+  Enhancements
+    - Support SATA NCQ status.
+
+Version: 7.73.1  (26 Mar 2007)
+  Fixes
+    - The ACU CLI utility was modified to display a message informing
+      customers that a firmware update is required if firmware version 2.04
+      is detected on a Smart Array P400, P400i, or P800 controller.
+  Enhancements
+    - Added support for the Smart Array E500 controller.
+
+Version: 7.70.12  (14 Dec 2006)
+  Enhancements
+    - Changed default RAID5 stripe size to 64K for MSA1000/1500
+    - Added new stripe-sizes (128KB and 256KB) for the P400, P600 and P800
+      controllers to allow migration of volumes from MSA20 to SAS
+      controllers.
+
+Version: 7.60.18  (25 Sep 2006)
+  Enhancements
+    - CLI now has two new show command parameters -> show [config] [detail].
+      See help for usage.
+
+Version: 7.50.18  (13 Apr 2006)
+  Enhancements
+    - Added support for the following:
+      * Smart Array P400 Controller
+      * Smart Array P400i Controller
+      * Smart Array E200 Controller
+      * Smart Array E200i Controller
+    - Added support for over 2 TB on controllers that support it.
+    - Array accelerator options are disabled on controllers with zero memory.
+    - When using create, add drives, add spares, and remove spares, the user
+      can now specify drive ranges. Instead of "1:1,1:2,1:3,1:4" the user can
+      type "1:1-1:4".
+    - CLI now supports targeting a controller via the chassis serial number.
+      See help for additional usage information.
+
+Version: 7.40.7  (9 Sep 2005)
+  Enhancements
+    - Updated so RAID ADG is now referred to as RAID 6 (ADG).
+
+Version: 7.31.1  (24 Jun 2005)
+  Fixes
+    - Fixes a problem where specifying an array using the “drives” parameter
+      on the create logical drive operation could incorrectly result in
+      deletion of that array if the create operation fails.
+
+Version: 7.30.9  (4 May 2005)
+  Enhancements
+    - Added support for the following:
+      * Smart Array P600 controller.
+    - Active-Active on redundant controllers that support it.
+
+Version: 7.21.17  (28 Feb 2005)
+  Enhancements
+    - Added support for Red Hat Enterprise Linux 4.
+
+Version: 7.20.16  (14 Feb 2005)
+  Fixes
+    - Resolved issue where data in cache was found during reboot.
+  Enhancements
+    - Added support for the standbycontroller=disable command.
+
+Version: 7.17.1  (11 Dec 2004)
+  Fixes
+    - Corrected ACU CLI caches status messages to better correspond with ACU.
+
+Version: 7.15.19  (2 Sep 2004)
+  Enhancements
+    - Initial release.

files.diz

@@ -0,0 +1,2 @@
+amd64!hpssacli!2.20.11.0!hpssacli-2.20-11.0.x86_64.rpm!https://downloads.linux.hpe.com/SDR/repo/mcp/CentOS/6/x86_64/10.20/hpssacli-2.20-11.0.x86_64.rpm!4d6a884122ada43425835c05fe652947
+i386!hpssacli!2.20.11.0!hpssacli-2.20-11.0.i386.rpm!https://downloads.linux.hpe.com/SDR/repo/mcp/CentOS/6/i386/10.20/hpssacli-2.20-11.0.i386.rpm!56e8780941d783003829894558f7be46

i386/opt/hp/hpssacli/bld/hpssacli-2.20-11.0.i386.txt

@@ -1,10 +1,10 @@
-HPE Smart Storage Administrator CLI (HPSSACLI)
+HP Smart Storage Administrator CLI (HPSSACLI)
-Version 2.40-13.0
+Version 2.20-11.0
-11/4/2015
+5/1/2015
 
 Description
 -----------
-The HPE Smart Storage Administrator CLI is the command line-based disk 
+The HP Smart Storage Administrator CLI is the command line-based disk 
 configuration program for Smart Array Controllers. 
 
 * All other product names mentioned herein may be trademarks of their 
@@ -73,8 +73,10 @@ Supported Controllers
   Dynamic Smart Array B140i
   Smart HBA H240 Controller
   Smart HBA H240ar Controller
+  Smart HBA H240tr Controller
   Smart HBA H241 Controller
   Smart HBA H244br Controller
+  Smart Array P240tr Controller
   Smart Array P244br Controller
   Smart Array P246br Controller
   Smart Array P440 Controller
@@ -85,7 +87,7 @@ Supported Controllers
   Smart Array P840ar Controller
   Smart Array P841 Controller
  
-Installing & Running the HPE Smart Storage Administrator
+Installing & Running the HP Smart Storage Administrator
 --------------------------------------------------------------
   Installation:
     HPSSACLI is distributed using Red Hat Package Manager (RPM) packages and
@@ -101,7 +103,7 @@ Installing & Running the HPE Smart Storage Administrator
     name is hpssacli which is located in /usr/sbin.
 
     When attempting to run HPSSACLI on any HP-supported version of Linux, it is
-    highly recommended that you install the latest version of the HPE ProLiant
+    highly recommended that you install the latest version of the HP ProLiant
     Smart Array Controller driver for your intended Linux operating system.
     Drivers may be obtained by clicking on "Support & Drivers" from HP's
     website at:  http://www.hp.com
@@ -135,8 +137,8 @@ Additional Notes
       all SCSI devices on Linux. 
   2.  Do not insert or remove a controller driver module when hpssacli is
       running.
-  3.  Please stop the HPE Storage Agents when deleting logical drives
+  3.  Please stop the HP Storage Agents when deleting logical drives
-      since HPE Storage Agents keeps all logical drives open.
+      since HP Storage Agents keeps all logical drives open.
   4.  If all physical drives on a controller fail or are removed, software keys
       will not be saved to the controller.  
   5.  HPSSACLI may appear unresponsive during heavy array controller I/O
@@ -151,7 +153,7 @@ Additional Notes
       only the first 16 volumes configured will be available to the operating
       system.
   8.  On RHEL5 systems, for this version of the HPSSACLI version 3.6.18-10 or
-      newer of the HPE ProLiant Smart Array Controller Driver for Red Hat
+      newer of the HP ProLiant Smart Array Controller Driver for Red Hat
       Enterprise Linux 5 (x86, x86-64) is required. Drivers may be obtained by
       clicking on "Support & Drivers" from HP's website at:  http://www.hp.com