Imported Upstream version 2.40.13.0

amd64/opt/hp/hpssacli/bld/hpssacli-2.40-13.0.x86_64.txt

@@ -1,10 +1,10 @@
-HP Smart Storage Administrator CLI (HPSSACLI)
+HPE Smart Storage Administrator CLI (HPSSACLI)
-Version 2.20-11.0
+Version 2.40-13.0
-5/1/2015
+11/4/2015
 
 Description
 -----------
-The HP Smart Storage Administrator CLI is the command line-based disk 
+The HPE Smart Storage Administrator CLI is the command line-based disk 
 configuration program for Smart Array Controllers. 
 
 * All other product names mentioned herein may be trademarks of their 
@@ -73,10 +73,8 @@ Supported Controllers
   Dynamic Smart Array B140i
   Smart HBA H240 Controller
   Smart HBA H240ar Controller
-  Smart HBA H240tr Controller
   Smart HBA H241 Controller
   Smart HBA H244br Controller
-  Smart Array P240tr Controller
   Smart Array P244br Controller
   Smart Array P246br Controller
   Smart Array P440 Controller
@@ -87,7 +85,7 @@ Supported Controllers
   Smart Array P840ar Controller
   Smart Array P841 Controller
  
-Installing & Running the HP Smart Storage Administrator
+Installing & Running the HPE Smart Storage Administrator
 --------------------------------------------------------------
   Installation:
     HPSSACLI is distributed using Red Hat Package Manager (RPM) packages and
@@ -103,7 +101,7 @@ Installing & Running the HP Smart Storage Administrator
     name is hpssacli which is located in /usr/sbin.
 
     When attempting to run HPSSACLI on any HP-supported version of Linux, it is
-    highly recommended that you install the latest version of the HP ProLiant
+    highly recommended that you install the latest version of the HPE ProLiant
     Smart Array Controller driver for your intended Linux operating system.
     Drivers may be obtained by clicking on "Support & Drivers" from HP's
     website at:  http://www.hp.com
@@ -137,8 +135,8 @@ Additional Notes
       all SCSI devices on Linux. 
   2.  Do not insert or remove a controller driver module when hpssacli is
       running.
-  3.  Please stop the HP Storage Agents when deleting logical drives
+  3.  Please stop the HPE Storage Agents when deleting logical drives
-      since HP Storage Agents keeps all logical drives open.
+      since HPE Storage Agents keeps all logical drives open.
   4.  If all physical drives on a controller fail or are removed, software keys
       will not be saved to the controller.  
   5.  HPSSACLI may appear unresponsive during heavy array controller I/O
@@ -153,7 +151,7 @@ Additional Notes
       only the first 16 volumes configured will be available to the operating
       system.
   8.  On RHEL5 systems, for this version of the HPSSACLI version 3.6.18-10 or
-      newer of the HP ProLiant Smart Array Controller Driver for Red Hat
+      newer of the HPE ProLiant Smart Array Controller Driver for Red Hat
       Enterprise Linux 5 (x86, x86-64) is required. Drivers may be obtained by
       clicking on "Support & Drivers" from HP's website at:  http://www.hp.com
 

build_orig.sh

@@ -1,64 +0,0 @@
-#!/bin/bash
-# the directory of the script
-DIR=`cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd`
-echo "Working directory $DIR"
-
-# the temp directory used, within $DIR
-WORK_DIR=`mktemp -d -p "$DIR"`
-echo "Creating temp working directory $WORK_DIR"
-
-# deletes the temp directory
-function cleanup {
-  rm -rf "$WORK_DIR"
-  echo "Deleted temp working directory $WORK_DIR"
-}
-
-# register the cleanup function to be called on the EXIT signal
-trap cleanup EXIT
-
-# Download Files specified in files.diz
-while IFS=! read type app version outputfile url md5
-do
-  echo "Downloading $app Version: $version"
-  #use -O for output file. define $outputfile yourself
-  wget --no-check-certificate --tries=1 -O $DIR/../$outputfile --timeout=5 "$url"
-  # use $(..) instead of backticks.
-  calculated_md5=$(md5sum "$DIR/../$outputfile" | cut -f 1 -d " ")
-  # compare md5
-  case "$calculated_md5" in
-    "$md5" )
-      echo "$DIR/../$outputfile md5 ok"
-    ;;
-    *)
-      echo "$DIR/../$outputfile md5 NOT ok"
-      exit 1
-    ;;
-  esac
-done < "$DIR/files.diz"
-
-# Extract to specified dir and set some variables
-while IFS=! read type app version outputfile url md5
-do
-  mkdir -p $WORK_DIR/${app}-${version}/${type}
-  pushd $WORK_DIR/${app}-${version}/${type}
-  rpm2cpio $DIR/../$outputfile | cpio -idmv
-  echo "${app}_${version}.orig.tar.gz" > $WORK_DIR/filename.txt
-  echo "${app}-${version}" > $WORK_DIR/dirname.txt
-  echo "${version}" > $WORK_DIR/version.txt
-  popd
-done < "$DIR/files.diz"
-
-FILENAME=`cat $WORK_DIR/filename.txt`
-DIRNAME=`cat $WORK_DIR/dirname.txt`
-echo "Creating $DIR/../$FILENAME "
-
-pushd $WORK_DIR
-tar -czf $DIR/../$FILENAME $DIRNAME
-popd
-
-VER=`cat $WORK_DIR/version.txt`
-echo "Importing $DIR/../$FILENAME as $VER into git"
-cleanup
-gbp import-orig --pristine-tar -u $VER $DIR/../$FILENAME
-
-exit 0

debian/README.source

@@ -1,11 +0,0 @@
-hpssacli (9.20.9.0-1) unstable; urgency=low
-
-  Sources have been repacked from the following upstream packages:
-
-    a569ddb584d2133bf44f06992d746f51  hpssacli-9.20-9.0.i386.rpm
-    c0d6f57fe3cf1fa6342fb0097e3ae100  hpssacli-9.20-9.0.x86_64.rpm
-
-  Both have been turned into tarballs using alien and then uncompressed to
-  i386 and amd64 sub-directories.
-
- -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Mon, 20 Aug 2012 19:58:55 +0200

debian/changelog

@@ -1,48 +0,0 @@
-hpssacli (2.20.11.0-2) UNRELEASED; urgency=medium
-
-  * cleanup typos
-
- -- Mario Fetka <mario@localhost.localdomain>  Thu, 26 May 2016 21:09:53 +0200
-
-hpssacli (2.20.11.0-1) unstable; urgency=low
-
-  * Non-maintainer upload.
-  * Bump to new release
-  * Imported Upstream version 2.0.23.0
-
- -- Mario Fetka <mario@localhost.localdomain>  Sat, 21 May 2016 07:46:39 +0200
-
-hpssacli (9.20.9.0-1) unstable; urgency=low
-
-  [ Adam Cécile (Le_Vert) ]
-  * New upstream release (Closes: #225).
-  * Now ship amd64 binaries along i386 ones.
-  * Rewrite debian/copyright to use machine readable format.
-
-  [ Mario Fetka ]
-
- -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Mon, 20 Aug 2012 19:58:55 +0200
-
-hpssacli (8.25.5-1) unstable; urgency=low
-
-  * New upstream release.
-  * Do not depend on libstdc++2.10 anymore because it has been removed
-    from current distros. Ship our own lib (extracted from etch package)
-    in a private directory.
-  * Add upstream changelog.
-  * Fix download url (debian/copyright).
-
- -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Mon, 27 Apr 2009 15:41:54 +0200
-
-hpssacli (8.10-1) unstable; urgency=low
-
-  * New upstream release.
-  * debian/watch added (url stolen to gentoo).
-
- -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Tue, 23 Dec 2008 14:39:26 +0100
-
-hpssacli (7.80-1) unstable; urgency=low
-
-  * Initial release.
-
- -- Adam Cécile (Le_Vert) <gandalf@le-vert.net>  Wed, 20 Aug 2008 13:41:40 +0200

debian/compat

@@ -1 +0,0 @@
-5

debian/control

@@ -1,13 +0,0 @@
-Source: hpssacli
-Section: non-free/admin
-Priority: optional
-Maintainer: Adam Cécile (Le_Vert) <gandalf@le-vert.net>
-Build-Depends: debhelper (>= 5), sharutils
-Standards-Version: 3.9.3
-
-Package: hpssacli
-Architecture: i386 amd64
-Depends: ${shlibs:Depends}, ${misc:Depends}
-Description: HP command line SmartArray configuration utility
- This is the proprietary command line utility from HP to manage HP/Compaq
- SmartArray hardware RAID HBAs mostly found in Proliant servers.

debian/copyright

@@ -1,361 +0,0 @@
-Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
-Upstream-Name: hpacucli
-Source: http://h20000.www2.hp.com/bizsupport/site/search/r4_0/jsp/search.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=468780&tx=hpacucli&sc=2&cf=1&rf=1&lkc=1&lk=1&sts=1&nh=10
-
-Files: *
-Copyright: Copyright (C) 1988-1991 COMPAQ Computer Corporation
-License: Proprietary
- PROLIANT ESSENTIALS SOFTWARE
- .
- 		END USER LICENSE AGREEMENT
- .
- PLEASE READ THIS END USER LICENSE AGREEMENT ("AGREEMENT") CAREFULLY.  THIS
- AGREEMENT IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR SINGLE
- ENTITY) ("YOU") AND HEWLETT-PACKARD COMPANY ("HP").  BY CLICKING THE "AGREE"
- BUTTON BELOW, COPYING, INSTALLING, OR OTHERWISE USING THE SOFTWARE,
- (i) YOU DO SO WITH THE INTENT TO ELECTRONICALLY "EXECUTE" THIS AGREEMENT, AND
- (ii) YOU AGREE TO BE BOUND BY AND COMPLY WITH THE FOLLOWING TERMS AND
- CONDITIONS, INCLUDING THE WARRANTY STATEMENT, AS WELL AS ANY TERMS AND
- CONDITIONS CONTAINED IN THE "ANCILLARY SOFTWARE" LIST.
- .
- IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT,
- (A) IF THIS AGREEMENT IS DISPLAYED ELECTRONICALLY, YOU MAY INDICATE REJECTION
-     OF THIS AGREEMENT BY CLICKING THE "DISAGREE" BUTTON;
- (B) YOU SHALL NOT INSTALL THE SOFTWARE; AND
- (C) HP DOES NOT GRANT YOU ANY RIGHTS TO USE THE SOFTWARE.
- NOTWITHSTANDING THE FOREGOING, INSTALLING OR OTHERWISE USING THE SOFTWARE
- INDICATES YOUR ACCEPTANCE OF THE TERMS AND CONDITIONS OF THIS AGREEMENT.
- IF YOU PURCHASED THE SOFTWARE, YOU MAY RETURN THE SOFTWARE TO THE PLACE OF
- PURCHASE FOR A FULL REFUND.
- .
- THE SOFTWARE PROVIDED HEREIN, IS PROVIDED BY HP AND BY THIRD PARTIES, INCLUDING
- THE OPEN SOURCE COMMUNITY ("ANCILLARY SOFTWARE").  USE OF THE HP SOFTWARE, THE
- ANCILLARY SOFTWARE, ACCOMPANYING PRINTED MATERIALS, AND THE "ONLINE" OR
- ELECTRONIC DOCUMENTATION (COLLECTIVELY THE "PRODUCT") IS CONDITIONED UPON AND
- LIMITED BY THE FOLLOWING TERMS AND CONDITIONS, INCLUDING THE "AS IS WARRANTY
- STATEMENT" AND THE TERMS AND CONDITIONS OF THE ANCILLARY SOFTWARE LICENSE
- AGREEMENTS ("ANCILLARY SOFTWARE LICENSES").
- .
- USE OF ANCILLARY SOFTWARE SHALL BE GOVERNED BY THE ANCILLARY SOFTWARE LICENSE,
- EXCEPT THAT THE DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITIES
- PROVISIONS CONTAINED IN THE "AS-IS WARRANTY STATEMENT" OF THIS AGREEMENT SHALL
- ALSO APPLY TO SUCH ANCILLARY SOFTWARE.  HP HAS IDENTIFIED ANCILLARY SOFTWARE
- BY EITHER NOTING THE ANCILLARY SOFTWARE PROVIDER"S OWNERSHIP WITHIN EACH
- ANCILLARY SOFTWARE PROGRAM FILE AND/OR BY PROVIDING LICENSING INFORMATION IN
- THE "ANCILLARY SOFTWARE" LIST. BY ACCEPTING THE TERMS AND CONDITIONS OF THIS
- AGREEMENT, YOU ARE ALSO ACCEPTING THE TERMS AND CONDITIONS OF EACH ANCILLARY
- SOFTWARE LICENSE IN THE ANCILLARY SOFTWARE LIST.
- .
- IF AND ONLY IF THE PRODUCT INCLUDES SOFTWARE LICENSED UNDER THE GNU GENERAL
- PUBLIC LICENSE ("GPL SOFTWARE"), YOU MAY OBTAIN A COMPLETE MACHINE-READABLE
- COPY OF THE GPL SOFTWARE SOURCE CODE ("GPL SOURCE CODE") BY DOWNLOAD FROM A
- SITE SPECIFIED IN THE FOLLOWING HP WEBSITE:
- HTTP://H18004.WWW1.HP.COM/PRODUCTS/SERVERS/PROLIANTESSENTIALS/VALUEPACK/LICENSING.HTML.
- UPON YOUR WRITTEN REQUEST, HP WILL PROVIDE, FOR A FEE COVERING THE COST OF
- DISTRIBUTION, A COMPLETE MACHINE-READABLE COPY OF THE GPL SOURCE CODE, BY MAIL,
- TO YOU.  INFORMATION ABOUT HOW TO MAKE A WRITTEN REQUEST FOR GPL SOURCE CODE
- MAY BE FOUND AT THE FOLLOWING WEBSITE:
- HTTP://H18004.WWW1.HP.COM/PRODUCTS/SERVERS/PROLIANTESSENTIALS/VALUEPACK/LICENSING.HTML .
- .
- .
- LICENSE TERMS
- .
- SUBJECT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT AND ANY RIGHTS,
- LIMITATIONS AND OBLIGATIONS SET FORTH IN THE ANCILLARY SOFTWARE LICENSES:
- .
- 1.	LICENSE GRANT
- .
- a.	IF SOFTWARE DOES NOT REQUIRE AN ACTIVATION KEY.  If the Software does
- not require an Activation Key and provided that You comply with all the terms
- and conditions of this Agreement, HP grants You a non-exclusive,
- non-transferable (except as provided in Section 16), worldwide (except for the
- countries referenced  in Section 12) license under HP's copyrights, to install,
- copy on as many computers as you need for your business, use, execute, make
- archival or backup copies, and display ("Use") the object code version of the
- Product on the computer(s) on which this Product is installed and in the
- operating environment as identified by HP in the accompanying materials.
- .
- b.	IF SOFTWARE REQUIRES AN ACTIVATION KEY.  If the Software requires an
- Activation Key, and provided that You comply with all terms and conditions of
- this Agreement, then depending upon the specific hardware configuration You
- employ, HP grants You the following license  ("License Type") and rights:
- .
- 	Authorized Copies.  You are licensed to install, make Authorized Copies
- of (as defined in this section), execute, and display ("Use") the object code
- version of the Product on an equivalent number of Computers, Host/Client Pairs,
- Computer Nodes, or Clustered Computers (as defined in the table below) as you
- have Authorized Copies.  Authorized Copies is defined as the number of copies
- that you have paid for as stated in the invoice or comparable document
- evidencing an authorized quantity.
- .
- LICENSE TYPE 	SOFTWARE INSTALLS TO:		LICENSED RIGHTS
- 		(hardware configuration)
- ------------------------------------------------------------------------------
- Computer	A computer 			You have a right to install
- 						and Use the Product on a single
- 						computer. The installed copy
- 						may not be transferred to or
- 						used on any other computer.
- .
- ------------------------------------------------------------------------------
- Node/Client	A set of computers with a	You have a right to install and
- 		minimum of one host and one	Use the Product on a Host/Client
- 		client connected to each	Pair or a Single Node.  Copies
- 		other ("Host/Client Pair"),	of the Product installed on a
- 		or in certain instances, a	Host/Client Pair or Single Node
- 		single computer			may not be transferred to any
- 		("Single Node")			other host or client computers
- 						or other single nodes. You can
- 						continue to Use the Product on
- 						licensed clients when a new
- 						server is introduced to the
- 						licensed clients.
- .
- ------------------------------------------------------------------------------
- Cluster		More than two computers		You have a right to install and
- 		physically connected together	Use the Product on each
- 		in a cluster configuration	Clustered Computer. The
- 		(each of which is referred to	installed copy may not be
- 		as "Clustered Computer")	transferred to or used on any
- 						other computer.
- .
- 	Storage.  You may copy the Product into the local memory or storage
- device of the hardware configuration loaded with the Authorized Copies. You may
- copy the Product onto a reasonable number of network servers or a secure
- intranet for the sole purpose of distributing the Product to the Computers,
- Host/Client Pairs, Computer Nodes, or Clustered Computers.  You may make
- archival or back-up copies of the Product. You shall keep the activation key
- with the hardware configuration to which the activation key is licensed. You
- should keep copies of the activation key information for future retrieval
- purposes.
- .
- 2.	 NEW RELEASES.  "New Release" means a release of the Product that may
- contain fixes, corrections, or minor improvements to the Product.  New Releases
- are distributed from time to time solely at the option of HP.  If HP offers a
- New Release, it may come with its own terms and conditions, however if it does
- not, You may use the New Release only under the terms and conditions of this
- Agreement.
- 3.	NEW VERSIONS.  "New Version" means a version of the Product that may
- contain significant changes, enhancements, and/or functional improvements to
- the Product.  New Versions are distributed solely at the option of HP.  If HP
- offers a New Version, it may come with its own terms and conditions, however
- if it does not, You may use the New Version only under the terms and conditions
- of this Agreement.
- 4.	OWNERSHIP.   The Product is owned and copyrighted by Hewlett-Packard
- Development Company, L.P., HP's intellectual property management company, and
- by third party suppliers, except for the Ancillary Software, which is owned and
- copyrighted by the Ancillary Software providers indicated in the ANCILLARY
- SOFTWARE list.  Your right to Use the Product confers no title or ownership and
- is not a sale of the Product or any part thereof.  Third party suppliers and
- Ancillary Software providers are intended beneficiaries under this Agreement
- and may protect their rights in their respective portions of the Product
- directly against You.
- 5.	TRANSFER. Without the prior written consent of HP, or unless
- specifically permitted in the Ancillary Software License,  You have no right
- (a) to rent, lease, lend, or otherwise transfer the rights to the Product to
- anyone else; (b) to Use the Product for commercial timesharing or bureau use;
- or (c) to copy the Product onto any public or distributed network.
- 6.	 COPYRIGHT.  United States copyright laws, other countries' copyright
- laws, and international treaty provisions protect the Product.  You shall not
- remove any product identification, copyright notices, or proprietary notices
- from the Product.
- 7.	SUPPORT.  Support terms and conditions and contact information are
- detailed in the Worldwide Limited Warranty and Technical Support for Industry
- Standard Server Products statement ("Support Statement"), a copy of which is
- available on the HP web site at www.hp.com.  Subject to the terms of the
- Support Statement, for HP software products installed on HP computers,
- technical support for questions regarding media and Product installation may
- be available for a ninety (90) day period from the date of purchase of the HP
- computer on which this Product is installed ("Support Term").  To access this
- support in North America, call the HP Technical Support Phone Center at
- 1-800-652-6672.  This service is available during normal business hours,
- Monday through Friday, during the Support Term.  Outside North America, call
- the nearest HP Technical Support Center.  No other support, including
- without limitation any on-site support, is provided under this Agreement.
- 8.	LIMITATION ON REVERSE ENGINEERING.  Reverse engineering of Ancillary
- Software shall be governed by its respective Ancillary Software License. As
- for the remainder of the Product, You shall not modify, disassemble, reverse
- engineer, decompile, decrypt, or otherwise attempt to access or determine the
- source code of the Product without HP's prior written consent.  Where You have
- other statutory rights with regard to software, You shall provide HP with
- reasonably detailed information regarding any intended disassembly or
- decompilation of the Product prior to performing such disassembly or
- decompilation.  You shall not decrypt the Product unless necessary for the
- licensed Use of the Product.
- 9.	RESERVATION OF RIGHTS.  HP, its third party suppliers, and Ancillary
- Software providers reserve all rights not expressly granted to You in this
- Agreement.
- 10.	TERM AND TERMINATION.  You may exercise the rights of this Agreement
- and of the Ancillary Software Licenses for a period of time starting at Your
- acceptance of the terms and conditions of this Agreement and for so long as
- You meet such terms and conditions ("Term").  Notwithstanding the foregoing,
- HP may terminate Your right to Use the Product, upon notice, for Your failure
- to comply with any such term or condition.  Immediately upon termination, You
- shall remove, destroy, or return to HP all copies of the Product, including
- those copies of the Product that are merged into Your adaptations, except for
- individual pieces of data in Your database.  With HP's prior written consent,
- one copy of the Product may be retained, for archival purposes only, subsequent
- to termination.  You may terminate this Agreement at any time by returning or
- destroying the Product together with merged portions in any form.
- 11.	CONFIDENTIAL COMPUTER SOFTWARE.  Valid license from HP required for
- possession, use, or copying.  Consistent with FAR 12.211 and 12.212, Commercial
- Computer Software, Computer Software Documentation, and Technical Data for
- Commercial Items are licensed to the U.S. Government under vendor's standard
- commercial license.
- 12.	COMPLIANCE WITH LAW.  The Product and any associated hardware,
- software, technology or services may not be exported, reexported, transferred
- or downloaded to persons or entities listed on the U.S. Department of Commerce
- Denied Persons List, Entity List of proliferation concern, or on any U.S.
- Treasury Department Designated Nationals exclusion list, any country under
- U.S. economic embargo, or to parties directly or indirectly involved in the
- development or production of nuclear, chemical, biological weapons or in
- missile technology programs as specified in the U.S. Export Administration
- Regulations (15 CFR 744).  By accepting this Agreement You confirm that You
- are not (i) located in (or a national resident of) any country under U.S.
- economic embargo, (ii) identified on any U.S. Department of Commerce Denied
- Persons List, Entity List or Treasury Department Designated Nationals exclusion
- list, and (iii) directly or indirectly involved in the development or
- production of nuclear, chemical, biological weapons or in missile technology
- programs as specified in the U.S. Export Administration Regulations.
- 13.	APPLICABLE LAW. This Agreement shall be construed in accordance with
- the laws of the State of Texas, without regard to conflict of laws principles.
- The United Nations Convention on Contracts for the International Sale of Goods
- is specifically disclaimed.  If the Product was acquired outside the United
- States, then local law may apply.
- 14.	SEVERABILITY.  If any term or provision of this Agreement is determined
- to be illegal or unenforceable, the validity or enforceability of the remainder
- of the terms or provisions herein will remain valid and in full force and
- effect. Failure or delay in enforcing any right or provision of this Agreement
- shall not be deemed a waiver of such right or provision with respect to any
- subsequent breach. Provisions herein, which by their nature extend beyond the
- termination of the license in the Product, will remain in effect until
- fulfilled.
- 15.	CONSENT TO USE OF DATA. You agree that HP may collect and use technical
- information that You provide in connection with Your Use and request for
- technical support of the Product from HP, however, HP will not use this
- information in a form that personally identifies You.
- 16.	ASSIGNMENT.  You may not assign, sublicense or transfer this Agreement,
- the Product, or any rights or obligations hereunder without the prior written
- consent of HP.  Any such attempted assignment, sublicense, or transfer will be
- null and void, and in such event, HP may terminate this Agreement immediately.
- Notwithstanding the foregoing, You may assign this Agreement and the rights
- granted hereunder with the transfer of all or substantially all of Your
- business.  The right to assign or transfer Ancillary Software is governed by
- the terms and conditions of the Ancillary Software Licenses.
- 17.	ENTIRE AGREEMENT.  This Agreement, including all Ancillary Software
- Licenses in the ANCILLARY SOFTWARE list, is the final, complete and exclusive
- agreement between You and HP relating to the Product, and supersedes any
- previous communications, representations, or agreements between the parties,
- whether oral or written, regarding the subject matter hereof.  Any additional
- or different terms and conditions not expressly set forth herein will not
- apply.  This Agreement may not be changed except by an amendment signed by an
- authorized representative of both You and HP.  To the extent the terms of any
- HP policies or programs for support services conflict with the terms of this
- Agreement, the terms of this Agreement shall control.
- 18.	WARRANTY
- .
- 	a.	NO ACTIVATION KEY REQUIRED SOFTWARE - AS-IS WARRANTY STATEMENT:
- .
- 	DISCLAIMER.  TO THE EXTENT ALLOWED BY APPLICABLE LAW, THIS PRODUCT AND
- SUPPORT SERVICES, IF ANY, ARE PROVIDED TO YOU "AS IS" WITHOUT WARRANTIES OF
- ANY KIND, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED.  HP SPECIFICALLY
- DISCLAIMS ANY IMPLIED WARRANTIES OF ANY KIND, INCLUDING WITHOUT LIMITATION,
- WARRANTY OF MERCHANTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT, TITLE,
- ACCURACY OF INFORMATIONAL CONTENT, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY
- OR COMPLETENESS OF RESPONSES, RESULTS, OR WORKMANLIKE EFFORT, LACK OF VIRUSES,
- AND LACK OF NEGLIGENCE, ALL WITH REGARD TO THE PRODUCT, AND THE PROVISION OF
- OR FAILURE TO PROVIDE SUPPORT SERVICES.  IN ADDITION, WITHOUT LIMITATION,
- THERE IS NO WARRANTY OF QUIET ENJOYMENT, QUIET POSSESSION AND CORRESPONDENCE
- TO DESCRIPTION WITH REGARD TO THE PRODUCT.  YOU ASSUME THE ENTIRE RISK AS TO
- THE RESULTS AND PERFORMANCE OF THE PRODUCT.  NO ORAL OR WRITTEN INFORMATION OR
- ADVICE GIVEN BY HP, HP"S AUTHORIZED REPRESENTATIVES, OR ANY OTHER PARTY SHALL
- CREATE A WARRANTY OR AMEND THIS "AS IS" WARRANTY.  Some jurisdictions do not
- allow exclusions of implied warranties or conditions, so the above exclusion
- may not apply to You to the extent prohibited by such local laws. You may have
- other rights that vary from country to country, state to state, or province to
- province.
- .
- 	b.	ACTIVATION KEY REQUIRED SOFTWARE - LIMITED WARRANTY.
- .
- HP warrants that the Product will perform substantially in accordance with the
- accompanying materials for a period of ninety (90) days from the date of
- purchase.  If an implied warranty or condition is created by Your
- state/jurisdiction and federal or state/provincial law prohibits disclaimer of
- it, You also have an implied warranty or condition, BUT ONLY AS TO DEFECTS FOR
- WHICH CLAIMS ARE MADE WITHIN NINETY (90) DAYS FROM THE DATE OF PURCHASE. AS TO
- ANY DEFECTS DISCOVERED FOR WHICH A CLAIM IS NOT MADE WITHIN THE NINETY-DAY
- PERIOD, THERE IS NO WARRANTY OR CONDITION OF ANY KIND.
- Some states/jurisdictions do not allow limitations on how long an implied
- warranty or condition lasts, so the above limitation may not apply to You.
- .
- 	DISCLAIMER.  The Limited Warranty that appears above is the only
- express warranty made to You and is provided in lieu of any other express
- warranties or implied warrantees (if any) created by any documentation,
- packaging or otherwise.  EXCEPT FOR THE LIMITED WARRANTY, AND TO THE MAXIMUM
- EXTENT PERMITTED BY APPLICABLE LAW, HP AND ITS SUPPLIERS PROVIDE THE PRODUCT
- AND SUPPORT SERVICES (IF ANY) "AS IS" AND WITH ALL FAULTS, AND HEREBY DISCLAIM
- ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS, IMPLIED OR STATUTORY,
- INCLUDING, BUT NOT LIMITED TO, ANY (IF ANY) IMPLIED WARRANTIES, DUTIES OR
- CONDITIONS OF MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE,
- SATISFACTORY QUALITY, NON-INFRINGEMENT OF TITLE, OF ACCURACY OR COMPLETENESS
- OF RESPONSES, OF RESULTS, OF WORKMANLIKE EFFORT, OF LACK OF VIRUSES, AND OF
- LACK OF NEGLIGENCE, ALL WITH REGARD TO THE PRODUCT, AND THE PROVISIONS OF OR
- FAILURE TO PROVIDE SUPPORT SERVICES.  ALSO, THERE IS NO WARRANTY OR CONDITION
- OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, CORRESPONDENCE TO DESCRIPTION,
- OR NON-INFRINGEMENT WITH REGARD TO THE PRODUCT.
- .
- 19.	LIMITATION OF LIABILITY.
- .
- 	a.	 FOR ALL SOFTWARE WHETHER OR NOT AN ACTIVATION KEY IS REQUIRED
- .
- EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL HP OR ITS
- SUBSIDIARIES, AFFILIATES, DIRECTORS, OFFICERS, EMPLOYEES, AGENTS OR SUPPLIERS
- BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE,
- OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS) ARISING
- OUT OF THE USE, THE INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT,
- WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER
- OR NOT HP WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  THE PRODUCT IS NOT
- DESIGNED, MANUFACTURED OR INTENDED FOR USE IN THE PLANNING, CONSTRUCTION,
- MAINTENANCE, OR OPERATION OF A NUCLEAR FACILITY, AIRCRAFT NAVIGATION OR
- AIRCRAFT COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, LIFE SUPPORT MACHINES,
- OR WEAPONS SYSTEMS (COLLECTIVELY "HIGH RISK APPLICATIONS").  YOU ARE SOLELY
- LIABLE IF THE PRODUCT IS USED FOR HIGH RISK APPLICATIONS, AND YOU SHALL
- INDEMNIFY, DEFEND AND HOLD HP HARMLESS FROM ALL LOSS, DAMAGE, EXPENSE OR
- LIABILITY IN CONNECTION WITH SUCH USE.   YOU ASSUME THE ENTIRE RISK AS TO YOUR
- USE OF THE PRODUCT.  SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
- LIMITATION OF LIABILITY FOR INCIDENTIAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
- LIMITATION MAY NOT APPLY TO YOU TO THE EXTENT PROHIBITED BY SUCH LOCAL LAWS.
- .
- 	b.	FOR SOFTWARE REQUIRING AN ACTIVATION KEY
- .
- Notwithstanding any damages that You might incur for any reason whatsoever
- (including, without limitation, all damages referenced above and all direct
- or general damages), the entire liability of HP and any of its suppliers under
- any provision of this EULA and Your exclusive remedy for all of the foregoing
- (except for any remedy of repair or replacement if elected by HP with respect
- to any breach of the Limited Warranty) shall be limited to the greater of the
- amount actually paid by You for the Product or U.S. $5.00.  The foregoing
- limitations, exclusions and disclaimers (including Warranty above) shall apply
- to the maximum extent permitted by applicable law, even if any remedy fails of
- its essential purpose.
- .
- REV08/51/03	End User License Agreement
-
-Files: debian/*
-Copyright: Copyright (C) 2008-2012 Adam Cécile (Le_Vert)
-License: GPL-2.0+
- This package is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- .
- This package is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
- .
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>
- .
- On Debian systems, the complete text of the GNU General
- Public License version 2 can be found in "/usr/share/common-licenses/GPL-2".

debian/dirs

@@ -1,2 +0,0 @@
-usr/sbin
-usr/lib/hpssacli

debian/docs

@@ -1 +0,0 @@
-i386/opt/hp/hpssacli/bld/hpssacli-*.txt

debian/hpssacli.wrapper

@@ -1,6 +0,0 @@
-#!/bin/sh
-#
-# This file is public domain.
-
-export LD_LIBRARY_PATH=/usr/lib/hpssacli:$LD_LIBRARY_PATH
-/usr/lib/hpssacli/hpssacli.real $@

debian/hpssascripting.wrapper

@@ -1,6 +0,0 @@
-#!/bin/sh
-#
-# This file is public domain.
-
-export LD_LIBRARY_PATH=/usr/lib/hpssacli:$LD_LIBRARY_PATH
-/usr/lib/hpssacli/hpssascripting.real $@

debian/rules

@@ -1,58 +0,0 @@
-#!/usr/bin/make -f
-
-# Uncomment this to turn on verbose mode.
-#export DH_VERBOSE=1
-
-DESTDIR = $(CURDIR)/debian/hpssacli
-DEB_BUILD_ARCH  ?= $(shell dpkg-architecture -qDEB_BUILD_ARCH)
-
-build: build-arch build-indep
-build-arch:
-build-indep:
-
-clean:
-	dh_testdir
-	dh_testroot
-	dh_clean
-
-install:
-	dh_testdir
-	dh_testroot
-	dh_clean -k
-	dh_installdirs
-ifeq ($(DEB_BUILD_ARCH),i386)
-	install -D -m 755 $(CURDIR)/i386/opt/hp/hpssacli/bld/hpssacli \
-		$(DESTDIR)/usr/lib/hpssacli/hpssacli.real
-	install -D -m 755 $(CURDIR)/i386/opt/hp/hpssacli/bld/hpssascripting \
-		$(DESTDIR)/usr/lib/hpssacli/hpssascripting.real
-endif
-ifeq ($(DEB_BUILD_ARCH),amd64)
-	install -D -m 755 $(CURDIR)/amd64/opt/hp/hpssacli/bld/hpssacli \
-		$(DESTDIR)/usr/lib/hpssacli/hpssacli.real
-	install -D -m 755 $(CURDIR)/amd64/opt/hp/hpssacli/bld/hpssascripting \
-		$(DESTDIR)/usr/lib/hpssacli/hpssascripting.real
-endif
-	install -D -m 755 $(CURDIR)/debian/hpssacli.wrapper \
-		$(DESTDIR)/usr/sbin/hpssacli
-	install -D -m 755 $(CURDIR)/debian/hpssascripting.wrapper \
-		$(DESTDIR)/usr/sbin/hpssascripting
-
-binary-indep: build install
-binary-arch: build install
-	dh_testdir
-	dh_testroot
-	dh_installchangelogs debian/upstream_changelog
-	dh_installdocs
-	dh_installman
-	dh_link
-	dh_strip
-	dh_compress
-	dh_fixperms
-	dh_installdeb
-	dh_shlibdeps -l$(DESTDIR)/usr/lib/hpssacli/
-	dh_gencontrol
-	dh_md5sums
-	dh_builddeb
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install

debian/source/format

@@ -1 +0,0 @@
-1.0

debian/upstream_changelog

@@ -1,336 +0,0 @@
-Version: 9.10.22.0  (4 Jun 2012)
-  Enhancements
-    - Added support for the following controllers: 
-      * HP Dynamic Smart Array B120i
-      * HP Dynamic Smart Array B320i
-      * HP Smart Array P822
-    - Now officially supporting and providing native X64 versions in addition
-      to existing 32 bit versions
-    - Added new features requiring a valid SAAP 2.0 (Smart Array Advanced Pack) license key:
-      * Replace Array:
-        Allows the transfer of contents of an array to an existing empty
-        array or a new array. All logical drives from the source array will
-        be transferred. The original array will be deleted and its data
-        drives  will be freed as unassigned drives. The drive types at source
-        and destination arrays can be different. This allows moving data from
-        SATA to SAS, or SAS to SATA.  However, the drive types comprising the
-        array must still be of the same type.
-      * Heal Array:
-        Allows the replacement of failed or degraded physical drives in an
-        array with healthy physical drives. The original array and logical
-        drive numbering will be unaffected after the replacement. The
-        replacement physical drives must be of the same interface type (such
-        as SAS, SATA and etc.) as the original drives. The operation will be
-        available only if enough unassigned physical drives of the correct
-        size are available.
- 
-Version: 9.0.24.0  (27 Mar 2012)
-  Enhancements
-    - Added support for the following controllers:
-      * HP Smart Array P222
-      * HP Smart Array P420
-      * HP Smart Array P421
-      * HP Smart Array P220i
-      * HP Smart Array P420i
-    - Added support for the following features/devices:
-      * Smart Array Advanced Pack 2.0 (SAAP 2.0):
-        SAAP 2.0 provides full SAAP 1.0 feature functionality with the
-        following additions:
-          - RAID 1/10 Advanced Data Mirroring (ADM)
-          - Moving and Deleting of Individual Logical Volumes
-          - Move operation now supports SATA to SAS, SAS to SATA
-          - Predictive Spare Activation
-          - > 128 physical drives
-          - SmartSSD Wear Gauge
-          - Updated Cache Ratio settings
-          - Additional Strip Sizes - 512, 1024 on supported controllers and
-            configurations
-          - Device Temperatures - Controllers, Capacitors, Cache Modules, and
-            Hard Drives
-          - Overall Performance improvements
-          - 3 TB physical drives
-
-Version: 8.75-12.0  (22 Jun 2011)
-  Enhancements
-    - *** New ***
-      Starting with versions 8.75.12.0, an Offline version of ACU is
-      available from http://www.hp.com/ that allows users to boot directly
-      into the configuration and maintenance utilities prior to any Host OS
-      loading or being installed.
-      .
-      This new deliverable of ACU is available for download through normal
-      software methods (such as searching by Server model, OS, or device) or
-      by searching for 'HP ProLiant Offline Array Configuration Utility'
-    - SmartSSD Wear Gauge
-      This feature is accessible through the ssdinfo command in ACUCLI
-      Example code:
-        <target> show ssdinfo [detail|summary]
-        Provides a summary for solid state drives for the specified controller(s)
-        The target can be any valid controller/device
-        controller slot=1 show sddinfo
-        controller all show ssdinfo
-        controller all show ssdinfo detail
-        controller all show ssdinfo summary
-    - Greater than 2.2 TB Hard Drives
-
-Version: 8.70-8.0  (11 Mar 2011)
-  Enhancements
-    - Improved speed of Diagnostic report generation
-    - Supported serial logs included in the zip file of the Diagnositc
-      reports, when applicable
-    - New options available during creation of logical drive size
-    - Now showing current and max temperatures for physical drives
-    - Support for failed array controllers.  The "ctrl all show" command will
-      list any locked up controllers along with valid controllers. For failed
-      controllers, a message will display explaining its state along with a
-      lockup code, if applicable
-    - Support for "-h" and "-help" commandline option
-    - HPACUSCRIPTING updates:
-      * Will not display array accelerator info in capture files for
-        controllers which do not have cache or the cache is not configurable.
-        Attempting to set the array accelerator on these controllers will
-        result in a warning message (not an error)
-      * Support for logical drive command "Size=MAXMBR". This option creates
-        the largest possible volume in an array with the maximum size
-        constrained by the limits of the 32bit MBR
-      * New keyword, SIZEBLOCKS. Input scripts can now specify size as before
-        using SIZE (size in MB) or SIZEBLOCKS (size in 512 byte blocks) but
-        not both
-      * Now displays the disk interface type in the comment section for physical
-        disks.
-
-Version: 8.61-1.0  (8 Feb 2011)
-  Fixes
-    - In version 8.60-8.0 of HPACUCLI, using the "show or detail commands" on
-      any target that includes physical drives can cause the application to
-      exit if one or more of the included physical drives are in a failed
-      state.
-      This release, 8.61-1.0, corrects this problem and allows the command to
-      complete successfully.
-
-Version: 8.60-8.0  (10 Sep 2010)
-  Enhancements
-    - Overall Performance improvements
-      * HPACUCLI as well as in HPACUSCRIPTING 
-    - Surface Scan Analysis enhancements
-      * Disable
-      * High
-      * Idle
-
-Version: 8.50-6.0  (28 May 2010)
-  Enhancements
-    - Overall Performance improvements
-    - Physical drives in a SMART state are allowed to be used at user's
-      discretion
-    - Diagnostic Report additions:
-      * Parity group information for RAID 50 and RAID 60 logical drives
-      * Information for SEP devices and Expanders
-      * Updated Storage Enclosure names
-    - Applicable only with the appropriate SAAP License Key installed:
-      * The Move Array operation now allows the user to move an array to
-        physical drives that are smaller than the original physical drives,
-        provided that all the data in the existing logical drives will fit
-        into the new array
-          * The new drive set must have the same number of physical drives as
-            the existing drive set
-    - Added SEP devices and Expanders to "ctrl slot=X show config" and "ctrl
-      slot=X show config detail" commands
-    - Added an "OS Status" for logical drives to indicate if it is "locked"
-      by the OS
-    - Added display of Hardware Revision info for SAS Expander boards
-      * "<target> enclosure all show detail" should be used in order to see
-        the field displayed
-    - Added support for being able to run ACUCLI in non-interactive mode for
-      read-only commands (show) even if ACU is running. For example:
-        # hpacucli ctrl all show
-        # hpacucli ctrl slot=1 pd all show status
-    - Added "exitonerror" feature which allows the application to exit upon
-      encountering any error during execution of a command. This feature is
-      useful for scripts invoking ACUCLI and the feature will allow scripts
-      to know that an error has occurred.
-        * The setting can also be invoked from the console as an application switch
-          Example:  "hpacucli -exitonerror < myscript.txt"
-        * set [exitonerror=enable|disable]
-          Allows a script to decide whether an error encountered during execution
-        * show exitonerror
-          Displays the current exitonerror setting 
-     - Added enclosure show support
-       * enclosure [ all | port:box | serialnumber=xxxx ] show [ detail |
-         status]
-         Outputs the storage enclosure information The target can be any
-         valid storage enclosure
-         Examples:
-           * controller slot=5 enclosure all show
-           * controller slot=5 enclosure 4E:1 show detail
-           * controller slot=5 enclosure serialnumber=UAB123456 show status
-    - Added support for the 'show' command to display devices in a logical or
-      physical format similar to the support in ACU (GUI) 
-      * set [view=logical|physical]
-        - Allows the user to select whether certain show commands display the
-          output using a logical or physical view
-        - Logical view displays devices using their association with arrays
-        - Physical view displays the devices such as physical drives
-          according to their relationship with their storage enclosures
-        - The default value is logical view
-      * show view
-        - Displays the current view setting.
-      * Examples:
-        set view=physical
-        show view
-    - Added the capability to run multiple commands in command line mode
-      (non-interactive)
-      * The semicolon (";") is used as a delimiter between commands
-      * For example:
-        On LINUX, the semicolon must be escaped or in quotes
-        hpacucli "ctrl slot=1 show; ctrl slot=1 modify
-        drivewritecache=enable; ctrl slot=1 show"
-    - HPACUSCRIPTING Additions:
-      * Now shows an expanded usage message when invalid command line
-        arguments are provided
-      * Added feature to allow RAID=RAID1 for >2 disk mirrors. This 
-        allows backwards compatibility with "old" cpqacuxe scripting. Capture
-        will still output correct RAID level
-      * Added AUTO as a valid option for QUEUEDEPTH
-      * Overall Performance improvements
-      * Added Controller=FIRST support. Controllers are now sorted in capture
-        files in slot ascending order
-      * Added additional controller information to errors and warnings to
-        better identify where problems occur in an input file
-
-Version: 8.40-4.0  (25 Feb 2010)
-  Enhancements
-    - Support for Smart Array P812
- 
-Version: 8.35-7.0  (28 Sep 2009)
-  Enhancements
-    - Changes for HPACUCLI 8.35.X.X:
-      * Now supports command line history and tab completion
- 
-Version: 8.30-5.0  (14 Sep 2009)
-  Enhancements
-    - Changes for HPACUCLI 8.30.X.X:
-      * Enclosure View
- 
-Version: 8.28-13.0  (6 May 2009)
-  Enhancements
-    - Changes for HPACUCLI 8.28.X.X:
-      * Command Line Diagnostics (ADUCLI) is now integrated with HPACUCLI
-      * Scripting for captures and inputs is now intergrated with HPACUCLI
-        This support was previously delivered with ACU
-        The scripting command has changed from cpqacuxe to hpacuscripting
-
-Version: 8.25.5  (19 Feb 2009)
-  Enhancements
-    - Added Support for the following Controllers:
-      * Smart Array P212
-      * Smart Array P212 ZMR
-      * Smart Array P410
-      * Smart Array P410 ZMR
-      * Smart Array P410i
-      * Smart Array P410i ZMR
-      * Smart Array P411
-      * Smart Array P411 ZMR
-      * Smart Array B110i SATA RAID
-   - Additionally, added support for Advanced Pack
-
-Version: 8.20.18  (23 Jan 2009)
-  Enhancements
-    - Added Support for the following Controllers:
-      * Smart Array P212
-      * Smart Array P212 ZMR
-      * Smart Array P410
-      * Smart Array P410 ZMR
-      * Smart Array P411
-      * Smart Array P411 ZMR
-    - Additionally, added support for Smart Array Advanced Pack
-
-Version: 8.10.2  (6 Jun 2008)
-  Fixes
-    - Fixed an issue related to an incorrect Background Parity Initialization
-      status being displayed for RAID 5 and RAID 6 Logical Drives
-
-Version: 8.0.14  (26 Feb 2008)
-  Enhancements
-    - Added Dual Domain Support for the HP Smart Array P800 Controller
-    - Added 512K Stripe Size for RAID 5 (only on the following controllers
-      with minimum FW 5.00):
-        * Smart Array E500
-        * Smart Array P400/400i
-        * Smart Array P800
-
-Version: 7.85.18  (24 Jul 2007)
-  Enhancements
-    - Enabled drive write cache for all SAS controllers
-
-Version: 7.80.6  (27 Apr 2007)
-  Enhancements
-    - Support SATA NCQ status.
-
-Version: 7.73.1  (26 Mar 2007)
-  Fixes
-    - The ACU CLI utility was modified to display a message informing
-      customers that a firmware update is required if firmware version 2.04
-      is detected on a Smart Array P400, P400i, or P800 controller.
-  Enhancements
-    - Added support for the Smart Array E500 controller.
-
-Version: 7.70.12  (14 Dec 2006)
-  Enhancements
-    - Changed default RAID5 stripe size to 64K for MSA1000/1500
-    - Added new stripe-sizes (128KB and 256KB) for the P400, P600 and P800
-      controllers to allow migration of volumes from MSA20 to SAS
-      controllers.
-
-Version: 7.60.18  (25 Sep 2006)
-  Enhancements
-    - CLI now has two new show command parameters -> show [config] [detail].
-      See help for usage.
-
-Version: 7.50.18  (13 Apr 2006)
-  Enhancements
-    - Added support for the following:
-      * Smart Array P400 Controller
-      * Smart Array P400i Controller
-      * Smart Array E200 Controller
-      * Smart Array E200i Controller
-    - Added support for over 2 TB on controllers that support it.
-    - Array accelerator options are disabled on controllers with zero memory.
-    - When using create, add drives, add spares, and remove spares, the user
-      can now specify drive ranges. Instead of "1:1,1:2,1:3,1:4" the user can
-      type "1:1-1:4".
-    - CLI now supports targeting a controller via the chassis serial number.
-      See help for additional usage information.
-
-Version: 7.40.7  (9 Sep 2005)
-  Enhancements
-    - Updated so RAID ADG is now referred to as RAID 6 (ADG).
-
-Version: 7.31.1  (24 Jun 2005)
-  Fixes
-    - Fixes a problem where specifying an array using the “drives” parameter
-      on the create logical drive operation could incorrectly result in
-      deletion of that array if the create operation fails.
-
-Version: 7.30.9  (4 May 2005)
-  Enhancements
-    - Added support for the following:
-      * Smart Array P600 controller.
-    - Active-Active on redundant controllers that support it.
-
-Version: 7.21.17  (28 Feb 2005)
-  Enhancements
-    - Added support for Red Hat Enterprise Linux 4.
-
-Version: 7.20.16  (14 Feb 2005)
-  Fixes
-    - Resolved issue where data in cache was found during reboot.
-  Enhancements
-    - Added support for the standbycontroller=disable command.
-
-Version: 7.17.1  (11 Dec 2004)
-  Fixes
-    - Corrected ACU CLI caches status messages to better correspond with ACU.
-
-Version: 7.15.19  (2 Sep 2004)
-  Enhancements
-    - Initial release.

files.diz

@@ -1,2 +0,0 @@
-amd64!hpssacli!2.20.11.0!hpssacli-2.20-11.0.x86_64.rpm!https://downloads.linux.hpe.com/SDR/repo/mcp/CentOS/6/x86_64/10.20/hpssacli-2.20-11.0.x86_64.rpm!4d6a884122ada43425835c05fe652947
-i386!hpssacli!2.20.11.0!hpssacli-2.20-11.0.i386.rpm!https://downloads.linux.hpe.com/SDR/repo/mcp/CentOS/6/i386/10.20/hpssacli-2.20-11.0.i386.rpm!56e8780941d783003829894558f7be46

i386/opt/hp/hpssacli/bld/hpssacli-2.40-13.0.i386.txt

@@ -1,10 +1,10 @@
-HP Smart Storage Administrator CLI (HPSSACLI)
+HPE Smart Storage Administrator CLI (HPSSACLI)
-Version 2.20-11.0
+Version 2.40-13.0
-5/1/2015
+11/4/2015
 
 Description
 -----------
-The HP Smart Storage Administrator CLI is the command line-based disk 
+The HPE Smart Storage Administrator CLI is the command line-based disk 
 configuration program for Smart Array Controllers. 
 
 * All other product names mentioned herein may be trademarks of their 
@@ -73,10 +73,8 @@ Supported Controllers
   Dynamic Smart Array B140i
   Smart HBA H240 Controller
   Smart HBA H240ar Controller
-  Smart HBA H240tr Controller
   Smart HBA H241 Controller
   Smart HBA H244br Controller
-  Smart Array P240tr Controller
   Smart Array P244br Controller
   Smart Array P246br Controller
   Smart Array P440 Controller
@@ -87,7 +85,7 @@ Supported Controllers
   Smart Array P840ar Controller
   Smart Array P841 Controller
  
-Installing & Running the HP Smart Storage Administrator
+Installing & Running the HPE Smart Storage Administrator
 --------------------------------------------------------------
   Installation:
     HPSSACLI is distributed using Red Hat Package Manager (RPM) packages and
@@ -103,7 +101,7 @@ Installing & Running the HP Smart Storage Administrator
     name is hpssacli which is located in /usr/sbin.
 
     When attempting to run HPSSACLI on any HP-supported version of Linux, it is
-    highly recommended that you install the latest version of the HP ProLiant
+    highly recommended that you install the latest version of the HPE ProLiant
     Smart Array Controller driver for your intended Linux operating system.
     Drivers may be obtained by clicking on "Support & Drivers" from HP's
     website at:  http://www.hp.com
@@ -137,8 +135,8 @@ Additional Notes
       all SCSI devices on Linux. 
   2.  Do not insert or remove a controller driver module when hpssacli is
       running.
-  3.  Please stop the HP Storage Agents when deleting logical drives
+  3.  Please stop the HPE Storage Agents when deleting logical drives
-      since HP Storage Agents keeps all logical drives open.
+      since HPE Storage Agents keeps all logical drives open.
   4.  If all physical drives on a controller fail or are removed, software keys
       will not be saved to the controller.  
   5.  HPSSACLI may appear unresponsive during heavy array controller I/O
@@ -153,7 +151,7 @@ Additional Notes
       only the first 16 volumes configured will be available to the operating
       system.
   8.  On RHEL5 systems, for this version of the HPSSACLI version 3.6.18-10 or
-      newer of the HP ProLiant Smart Array Controller Driver for Red Hat
+      newer of the HPE ProLiant Smart Array Controller Driver for Red Hat
       Enterprise Linux 5 (x86, x86-64) is required. Drivers may be obtained by
       clicking on "Support & Drivers" from HP's website at:  http://www.hp.com