3DM2™ Online Help

Table of Contents Previous Next Index


Enclosure Management > Checking Enclosure Component Status > Temp Sensor Status
Temp Sensor Status
Below is a list of possible temperature sensor statuses.
Note that the temp sensor status indicates the temperature of the enclosure or backplane. Drive temperature, if supported, is available on the Drive Details page.
*
OK. The temperature sensor is functioning normally.
*
Failure. The temperature sensor is present, but is malfunctioning.
*
Not Installed. There is no temperature sensor installed.
*
Unknown. The status of the temperature sensor is not reportable.
*
Over Temp Warning. Temperature is higher than normal operating temperature.
*
Over Temp Fail. Temperature is higher than safe operating temperature.
*
Under Temp Warning. Temperature is colder than normal operating temperature.
*
Under Temp Fail. Temperature is lower than safe operating temperature.
Related Topics
Checking Enclosure Component Status
Fan Status
Power Supply Status
Slot Summary
Viewing a List of Enclosures
Locating a Specific Enclosure Component
Working with Enclosure Alarms
Downloading an Enclosure Diagnostic Log
Table of Contents Previous Next Index
LSI Corporation

Copyright LSI 2004-2010
To contact Support, go to http://www.lsi.com/channel/ContactUs