3DM2™ Online Help

Table of Contents Previous Next Index


Enclosure Management > Working with Enclosure Alarms > Controlling an Enclosure Alarm In 3DM2
Controlling an Enclosure Alarm In 3DM2
In 3DM2, you can turn off an enclosure alarm that has activated, or you can choose to mute or unmute it.
To mute, unmute, or turn off an enclosure alarm
1
Choose Monitor >> Enclosure Support from the menu bar in 3DM2.
The Status column indicates Alarm Activated when the alarm has turned on.
Show Enclosure Summary shows Alarm Activated
 
2
On the Enclosure Summary page, click the blue Enclosure ID link for the enclosure to go to the Enclosure Details page.
Show Enclosure Details page with enclosure alarm On
3
In the Audio Alarm Summary section of the Enclosure Details page, do one of the following:
To turn off the alarm, change the State to Off.
This deactivates and silences the audio alarm.
To mute the alarm, change the Audibility to Mute.
This silences the alarm without deactivating it. Activated remains in the Status field.
To unmute the alarm, change the Audibility to Unmute
This causes the alarm to sound again, if it is still active.
Related Topics
Working with Enclosure Alarms
Viewing a List of Enclosures
Checking Enclosure Component Status
Locating a Specific Enclosure Component
Downloading an Enclosure Diagnostic Log
Table of Contents Previous Next Index
LSI Corporation

Copyright LSI 2004-2010
To contact Support, go to http://www.lsi.com/channel/ContactUs