001E Unit inoperable

The 3ware RAID controller is unable to detect sufficient drives for the unit to be operable. Some drives have failed or are missing.

Examples of inoperable units are as follows:

RAID 0 missing any drives.

A RAID 5 or 50 unit with two or more drives missing from the same RAID 5 unit or subunits.

A RAID 10 unit with both drives missing from one of the RAID 1 subunits.

A RAID 6 unit with three or more drives missing.

Note: The controller only generates this message if the unit is missing drives for more than 20 seconds. This allows a hot swap of a drive to be completed without generating this error.

Action

The unit is no longer available for use. Return all missing drives to the unit. If the drives are physically present, check all data and power connections.

CAUTION: Do not delete the inoperable unit and recreate it as this will overwrite the data and make data recovery very difficult.

You may wish to contact technical support at
http://www.lsi.com/channel/ContactUs.