update to new opsi builder template

CLIENT_DATA/delsub3264.ins

@@ -1,24 +1,29 @@
 ; Copyright (c) uib gmbh (www.uib.de)
 ; This sourcecode is owned by uib gmbh
 ; and published under the Terms of the General Public License.
-; credits: http://www.opsi.org/credits/
+; credits: http://www.opsi.org/en/credits/
 
 
-Set $MsiId32$ = '{FC8D21C8-7B29-4104-ADB0-FEE9CA1C7922}'
+Set $IniFile32$ = $InstallDir32$ + "\opsi-" + $ProductId$ + ".ini"
-Set $UninstallProgram32$ = $InstallDir32$ + "\uninstall.exe"
 
-Set $MsiId64$ = '{F24FF688-7138-4CCF-A83F-71E9FB01170E}'
+Set $IniFile64$ = $InstallDir64$ + "\opsi-" + $ProductId$ + ".ini"
-Set $UninstallProgram32$ = $InstallDir64$ + "\uninstall.exe"
 
 if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
-	Message "Uninstalling " + $ProductId$ + " 32 Bit..."
+	if FileExists($IniFile32$)
-
+    		Set $OLD_VERSION$ = GetValueFromInifile($IniFile32$,"COMMON","VERSION","")
-	if FileExists($UninstallProgram32$)
+	        Set $OLD_CREATOR_TAG$ = GetValueFromInifile($IniFile32$,"COMMON","CREATOR_TAG","")
-		comment "Uninstall program found, starting uninstall"
+	        Set $OLD_RELEASE$ = GetValueFromInifile($IniFile32$,"COMMON","RELEASE","")
-		Winbatch_uninstall_32
-		sub_check_exitcode
 	endif
+	Message "Uninstalling " + $ProductId$ + " "+ $OLD_VERSION$ + "-" + $OLD_CREATOR_TAG$ + $OLD_RELEASE$ + " 32 Bit..."
 
+        if FileExists($IniFile32$)
+                Set $MsiIdOld32$ = GetValueFromInifile($IniFile32$,"X86","MsiId32","{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}")
+                if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiIdOld32$ + "] DisplayName") = "")
+                        comment "Old MSI id " + $MsiIdOld32$ + " found in registry, starting msiexec to uninstall old version"
+                        Winbatch_uninstall_msi_old_32
+                        sub_check_exitcode
+                endif
+        endif
 	if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId32$ + "] DisplayName") = "")
 		comment "MSI id " + $MsiId32$ + " found in registry, starting msiexec to uninstall"
 		Winbatch_uninstall_msi_32
@@ -32,14 +37,21 @@ if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specif
 endif
 
 if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
-	Message "Uninstalling " + $ProductId$ + " 64 Bit..."
+	if FileExists($IniFile64$)
-
+    		Set $OLD_VERSION$ = GetValueFromInifile($IniFile64$,"COMMON","VERSION","")
-	if FileExists($UninstallProgram64$)
+	        Set $OLD_CREATOR_TAG$ = GetValueFromInifile($IniFile64$,"COMMON","CREATOR_TAG","")
-		comment "Uninstall program found, starting uninstall"
+	        Set $OLD_RELEASE$ = GetValueFromInifile($IniFile64$,"COMMON","RELEASE","")
-		Winbatch_uninstall_64
-		sub_check_exitcode
 	endif
+	Message "Uninstalling " + $ProductId$ + " "+ $OLD_VERSION$ + "-" + $OLD_CREATOR_TAG$ + $OLD_RELEASE$ + " 64 Bit..."
 
+        if FileExists($IniFile64$)
+                Set $MsiIdOld64$ = GetValueFromInifile($IniFile64$,"X86_64","MsiId64","{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}")
+                if not (GetRegistryStringValue64("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiIdOld64$ + "] DisplayName") = "")
+                        comment "Old MSI id " + $MsiIdOld64$ + " found in registry, starting msiexec to uninstall old version"
+                        Winbatch_uninstall_msi_old_64
+                        sub_check_exitcode
+                endif
+        endif
 	if not (GetRegistryStringValue64("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId64$ + "] DisplayName") = "")
 		comment "MSI id " + $MsiId64$ + " found in registry, starting msiexec to uninstall"
 		Winbatch_uninstall_msi_64
@@ -55,15 +67,8 @@ endif
 comment "Delete program shortcuts"
 LinkFolder_uninstall
 
-[Winbatch_uninstall_32]
+[Winbatch_uninstall_msi_old_32]
-; Choose one of the following examples as basis for program uninstall
+msiexec /x $MsiIdOld32$ /qb! REBOOT=ReallySuppress
-;
-; === Nullsoft Scriptable Install System ================================================================
-; "$UninstallProgram32$" /S
-;
-; === Inno Setup ========================================================================================
-; "$UninstallProgram32$" /silent /norestart
-
 
 [Winbatch_uninstall_msi_32]
 msiexec /x $MsiId32$ /qb! REBOOT=ReallySuppress
@@ -71,25 +76,18 @@ msiexec /x $MsiId32$ /qb! REBOOT=ReallySuppress
 [Files_uninstall_32]
 ; Example for recursively deleting the installation directory (don't forget the trailing backslash):
 ;
-; delete -sf "$InstallDir32$\"
+delete -sf "$InstallDir32$\"
-
-[Winbatch_uninstall_64]
-; Choose one of the following examples as basis for program uninstall
-;
-; === Nullsoft Scriptable Install System ================================================================
-; "$UninstallProgram64$" /S
-;
-; === Inno Setup ========================================================================================
-; "$UninstallProgram64$" /silent /norestart
 
+[Winbatch_uninstall_msi_old_64]
+msiexec /x $MsiIdOld64$ /qb! REBOOT=ReallySuppress
 
 [Winbatch_uninstall_msi_64]
 msiexec /x $MsiId64$ /qb! REBOOT=ReallySuppress
 
 [Files_uninstall_64]
-; Example for recursively deleting the installation directory (don't forget the trailing backslash):
+; Example for recursively deleting the installation directory:
 ;
-; delete -sf "$InstallDir64$\"
+del -sf "$InstallDir64$\"
 
 [Registry_uninstall]
 ; Example of deleting a registry key:

CLIENT_DATA/login.ins

@@ -0,0 +1,24 @@
+; Copyright (c) uib gmbh (www.uib.de)
+; This sourcecode is owned by uib gmbh
+; and published under the Terms of the General Public License.
+; credits: http://www.opsi.org/en/credits/
+
+[Actions]
+Message "Profile Patch for VLC ...."
+
+comment "Did we run this script before ? - and set version stamp in profile"
+if getValue("installationstate", getProductMap) = "installed"
+	comment "Product is installed"
+	if not (scriptWasExecutedBefore)
+		comment "loginscript was not run yet "
+		Files_profile_copy
+		Registry_currentuser_set
+	endif
+endif
+
+[Files_profile_copy]
+copy "%Scriptpath%\profiles\*.*" "%CurrentAppdataDir%\ACME"
+
+[Registry_currentuser_set]
+openkey [HKCU\Software\ACME]
+set "show_greeting_window" = "no"

CLIENT_DATA/opsi-sourceforge.foldersize.ini

@@ -0,0 +1,9 @@
+[X86]
+MsiId32={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}
+
+[X86_64]
+MsiId64={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}
+
+[COMMON]
+PN=name
+VERSION=version

CLIENT_DATA/setup3264.ins

@@ -1,71 +1,76 @@
 ; Copyright (c) uib gmbh (www.uib.de)
 ; This sourcecode is owned by uib
 ; and published under the Terms of the General Public License.
-; credits: http://www.opsi.org/credits/
+; credits: http://www.opsi.org/en/credits/
 
 [Actions]
-requiredWinstVersion >= "4.10.8.6"
+requiredWinstVersion >= "4.11.2.6"
 
-DefVar $MsiId32$
+DefVar $MsiIdOld32$
-DefVar $UninstallProgram32$
+DefVar $IniFile32$
-DefVar $MsiId64$
+DefVar $MsiIdOld64$
-DefVar $UninstallProgram64$
+DefVar $IniFile64$
+DefVar $IniCfgFile$
 DefVar $LogDir$
 DefVar $ProductId$  
 DefVar $MinimumSpace$
 DefVar $InstallDir32$
 DefVar $InstallDir64$
 DefVar $ExitCode$
-DefVar $LicenseRequired$
-DefVar $LicenseKey$
-DefVar $LicensePool$
 DefVar $INST_SystemType$
 DefVar $INST_architecture$
+DefVar $OLD_VERSION$
+DefVar $OLD_CREATOR_TAG$
+DefVar $OLD_RELEASE$
 
 Set $INST_SystemType$ = GetSystemType
 set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
 
-
 Set $LogDir$ = "%SystemDrive%\tmp"
 
+; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh
+; and adds the following variables:
+;   from builder-product.cfg :  all variables definded by attribute WINST[index]
+;   from builder-product.cfg :  VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE   
+;   from opsi-builder.cfg    :  CREATOR_TAG CREATOR_NAME CREATOR_EMAIL           
+;   auto generated winst-variables
+;         $IconFile$: path to product picture
+;
+@@BUILDER_VARIABLES@@
+
 ; ----------------------------------------------------------------
 ; - Please edit the following values                             -
 ; ----------------------------------------------------------------
 ;$ProductId$ should be the name of the product in opsi
 ; therefore please: only lower letters, no umlauts, 
 ; no white space use '-' as a seperator
-Set $ProductId$       = "foldersize"
+Set $MinimumSpace$    = "10 MB"
-Set $MinimumSpace$    = "4 MB"
 ; the path were we find the product after the installation
 Set $InstallDir32$      = "%ProgramFiles32Dir%\FolderSize"
 Set $InstallDir64$      = "%ProgramFiles64Dir%\FolderSize"
-Set $LicenseRequired$ = "false"
-Set $LicensePool$     = "p_" + $ProductId$
 ; ----------------------------------------------------------------
 
+Set $IniCfgFile$ = "%ScriptPath%\opsi-" + $ProductId$ + ".ini"
+
 if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
 	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
 	isFatalError
 	; Stop process and set installation status to failed
 else
 	comment "Show product picture"
-	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
+	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $NAME$
 	
-	if FileExists("%ScriptPath%\delsub.ins")
+	if FileExists("%ScriptPath%\delsub3264.ins")
 		comment "Start uninstall sub section"
-		Sub "%ScriptPath%\delsub.ins"
+		Sub "%ScriptPath%\delsub3264.ins"
-	endif
-	
-	if $LicenseRequired$ = "true"
-		comment "Licensing required, reserve license and get license key"
-		Sub_get_licensekey
 	endif
 	
 	comment "installing"
 
 	if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
-		Message "Installing " + $ProductId$ + " 32 Bit..."
+		Message "Installing " + $ProductId$ + " "+ $VERSION$ + "-" + $CREATOR_TAG$ + $RELEASE$ + " 32 Bit..."
 		comment "Start setup program"
+		ChangeDirectory "%SCRIPTPATH%"
 		Winbatch_install_32
 		Sub_check_exitcode
 		comment "Copy files"
@@ -77,8 +82,9 @@ else
 	endif
 
 	if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
-		Message "Installing " + $ProductId$ + " 64 Bit..."
+		Message "Installing " + $ProductId$ + " " + $VERSION$ + "-" + $CREATOR_TAG$ + $RELEASE$ + " 64 Bit..."
 		comment "Start setup program"
+		ChangeDirectory "%SCRIPTPATH%"
 		Winbatch_install_64
 		Sub_check_exitcode
 		comment "Copy files"
@@ -92,27 +98,23 @@ else
 endif
 
 [Winbatch_install_32]
-; Choose one of the following examples as basis for your installation
+msiexec /i "$Install32Msi$" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=1 REBOOT=ReallySuppress
-; You can use $LicenseKey$ var to pass a license key to the installer
-;
-; === MSI package =======================================================================================
-; You may use the parameter PIDKEY=$Licensekey$
-msiexec /i "%ScriptPath%\X86FILE" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=2 REBOOT=ReallySuppress
 
 [Files_install_32]
+; copy the ini file to the InstallDir
+copy "$IniCfgFile$" "$InstallDir32$"
+
 ; Example of recursively copying some files into the installation directory:
 ;
 ; copy -s "%ScriptPath%\files\*.*" "$InstallDir32$"
 
 [Winbatch_install_64]
-; Choose one of the following examples as basis for your installation
+msiexec /i "$Install64Msi$" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=1 REBOOT=ReallySuppress
-; You can use $LicenseKey$ var to pass a license key to the installer
-;
-; === MSI package =======================================================================================
-; You may use the parameter PIDKEY=$Licensekey$
-msiexec /i "%ScriptPath%\AMD64FILE" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=2 REBOOT=ReallySuppress
 
 [Files_install_64]
+; copy the ini file to the InstallDir
+copy "$IniCfgFile$" "$InstallDir64$"
+
 ; Example of recursively copying some files into the installation directory:
 ;
 ; copy -s "%ScriptPath%\files\*.*" "$InstallDir64$"
@@ -159,44 +161,6 @@ msiexec /i "%ScriptPath%\AMD64FILE" /l* "$LogDir$\$ProductId$.install_log.txt" /
 ; 	icon_index: 2
 ; end_link
 
-[Sub_get_licensekey]
-if opsiLicenseManagementEnabled
-	comment "License management is enabled and will be used"
-
-	comment "Trying to get a license key"
-	Set $LicenseKey$ = demandLicenseKey ($LicensePool$)
-	; If there is an assignment of exactly one licensepool to the product the following call is possible:
-	; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$)
-	;
-	; If there is an assignment of a license pool to a windows software id, it is possible to use:
-	; DefVar $WindowsSoftwareId$
-	; $WindowsSoftwareId$ = "..."
-	; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$)
-	
-	DefVar $ServiceErrorClass$
-	set $ServiceErrorClass$ = getLastServiceErrorClass
-	comment "Error class: " + $ServiceErrorClass$
-	
-	if $ServiceErrorClass$ = "None"
-		comment "Everything fine, we got the license key '" + $LicenseKey$ + "'"
-	else
-		if $ServiceErrorClass$ = "LicenseConfigurationError"
-			LogError "Fatal: license configuration must be corrected"
-			LogError getLastServiceErrorMessage
-			isFatalError
-		else 
-			if $ServiceErrorClass$ = "LicenseMissingError"
-				LogError "Fatal: required license is not supplied"
-				isFatalError
-			endif
-		endif
-	endif
-else
-	LogError "Fatal: license required, but license management not enabled"
-	isFatalError
-endif
-
-
 [Sub_check_exitcode]
 comment "Test for installation success via exit code"
 set $ExitCode$ = getLastExitCode

CLIENT_DATA/uninstall.ins

@@ -1,75 +0,0 @@
-; Copyright (c) uib gmbh (www.uib.de)
-; This sourcecode is owned by uib gmbh
-; and published under the Terms of the General Public License.
-; credits: http://www.opsi.org/credits/
-
-[Actions]
-requiredWinstVersion >= "4.10.8.6"
-
-DefVar $MsiId32$
-DefVar $UninstallProgram32$
-DefVar $MsiId64$
-DefVar $UninstallProgram64$
-DefVar $LogDir$
-DefVar $ExitCode$
-DefVar $ProductId$
-DefVar $InstallDir32$
-DefVar $InstallDir64$
-DefVar $LicenseRequired$
-DefVar $LicensePool$
-DefVar $INST_SystemType$
-DefVar $INST_architecture$
-
-Set $INST_SystemType$ = GetSystemType
-set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
-
-
-Set $LogDir$ = "%SystemDrive%\tmp"
-
-; ----------------------------------------------------------------
-; - Please edit the following values                             -
-; ----------------------------------------------------------------
-Set $ProductId$       = "foldersize"
-Set $InstallDir32$      = "%ProgramFiles32Dir%\FolderSize"
-Set $InstallDir64$      = "%ProgramFiles64Dir%\FolderSize"
-Set $LicenseRequired$ = "false"
-Set $LicensePool$     = "p_" + $ProductId$
-; ----------------------------------------------------------------
-
-
-comment "Show product picture"
-ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
-
-Message "Uninstalling " + $ProductId$ + " ..."
-
-if FileExists("%ScriptPath%\delsub.ins")
-	comment "Start uninstall sub section"
-	Sub "%ScriptPath%\delsub.ins"
-endif
-
-if $LicenseRequired$ = "true"
-	comment "Licensing required, free license used"
-	Sub_free_license
-endif
-
-[Sub_free_license]
-if opsiLicenseManagementEnabled
-	comment "License management is enabled and will be used"
-
-	comment "Trying to free license used for the product"
-	DefVar $result$
-	Set $result$ = FreeLicense($LicensePool$)
-	; If there is an assignment of a license pool to the product, it is possible to use
-	; Set $result$ = FreeLicense("", $ProductId$)
-	;
-	; If there is an assignment of a license pool to a windows software id, it is possible to use
-	; DefVar $WindowsSoftwareId$
-	; $WindowsSoftwareId$ = "..."
-	; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)
-else
-	LogError "Error: licensing required, but license management not enabled"
-	isFatalError
-endif
-
-
-

CLIENT_DATA/uninstall3264.ins

@@ -0,0 +1,58 @@
+; Copyright (c) uib gmbh (www.uib.de)
+; This sourcecode is owned by uib gmbh
+; and published under the Terms of the General Public License.
+; credits: http://www.opsi.org/en/credits/
+
+[Actions]
+requiredWinstVersion >= "4.11.2.6"
+
+DefVar $MsiIdOld32$
+DefVar $IniFile32$
+DefVar $MsiIdOld64$
+DefVar $IniFile64$
+DefVar $IniCfgFile$
+DefVar $LogDir$
+DefVar $ExitCode$
+DefVar $ProductId$
+DefVar $InstallDir32$
+DefVar $InstallDir64$
+DefVar $INST_SystemType$
+DefVar $INST_architecture$
+DefVar $OLD_VERSION$
+DefVar $OLD_CREATOR_TAG$
+DefVar $OLD_RELEASE$
+
+Set $INST_SystemType$ = GetSystemType
+set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
+
+Set $LogDir$ = "%SystemDrive%\tmp"
+
+; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh
+; and adds the following variables:
+;   from builder-product.cfg :  all variables definded by attribute WINST[index]
+;   from builder-product.cfg :  VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE   
+;   from opsi-builder.cfg    :  CREATOR_TAG CREATOR_NAME CREATOR_EMAIL           
+;   auto generated winst-variables
+;         $IconFile$: path to product picture
+;
+@@BUILDER_VARIABLES@@
+
+; ----------------------------------------------------------------
+; - Please edit the following values                             -
+; ----------------------------------------------------------------
+Set $InstallDir32$    = "%ProgramFiles32Dir%\FolderSize"
+Set $InstallDir64$    = "%ProgramFiles64Dir%\FolderSize"
+; ----------------------------------------------------------------
+
+Set $IniCfgFile$ = "%ScriptPath%\opsi-" + $ProductId$ + ".ini"
+
+comment "Show product picture"
+ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $NAME$
+
+Message "Uninstalling " + $ProductId$ + " ..."
+
+if FileExists("%ScriptPath%\delsub3264.ins")
+	comment "Start uninstall sub section"
+	Sub "%ScriptPath%\delsub3264.ins"
+endif
+

FolderSize-2.5-x64.msi.sha1sum

@@ -1 +0,0 @@
-4e90cb2e6361a04e35ad9f9aa13324ac86a3b700  /usr/portage/distfiles/FolderSize-2.5-x64.msi

FolderSize-2.5-x86.msi.sha1sum

@@ -1 +0,0 @@
-811b99afbffbf64de2c05749aa0e69773884dad4  /usr/portage/distfiles/FolderSize-2.5-x86.msi

FolderSize-2.6-x64.msi.sha1sum

@@ -0,0 +1 @@
+e38c1797664d5b5affab0b136fba7ac4b0374363  /home/mario/.opsi-dist-cache/sourceforge.foldersize-2.6/X86_64/FolderSize-2.6-x64.msi

FolderSize-2.6-x86.msi.sha1sum

@@ -0,0 +1 @@
+f365b1ca8fb7e6c3bd6f3524e0dff4ce33895011  /home/mario/.opsi-dist-cache/sourceforge.foldersize-2.6/X86/FolderSize-2.6-x86.msi

Testing.txt

@@ -0,0 +1,28 @@
+*** Qualitiymanagement/Testing procedure
+
+- Product:
+        - Name: productname
+        - Version: xxx
+        - Release: yyyy
+
+- Environment
+        - OS: Native windows XP-32Bit installation
+	- Preinstalled packages: None (also no aio)
+	- Files used while testing:
+                File1: http://domain.de/file.ext
+
+- Testing process:
+        OPSI-action:
+                - Installation (without dependencies like AIO/Firefox): ??
+        Result:   
+                - File extensions related to program: ??
+                - Start menu entry: ??
+                - Starting/using program: viewer works, File1 is shown correctly: ??
+
+        OPSI-action:
+                - Uninstall
+        Result:
+                - File extensions related to program: unrelated: ??
+                - Start menu entry: none: ??
+
+

build.sh

@@ -1,122 +0,0 @@
-#!/bin/sh
-PN="foldersize"
-VERSION="2.5"
-RELEASE="1"
-PRIORITY="0"
-ADVICE=""
-TYPE="public"
-# all downloads should not have any traling parameters like ?downlaodid=1234 .....(should rewrite in python)
-ICON="http://cdn1.iconfinder.com/data/icons/bloggers-1-to-7-vol-PNG/128/left_folder.png"
-X86="http://downloads.sourceforge.net/foldersize/FolderSize-2.5-x86.msi"
-AMD64="http://downloads.sourceforge.net/foldersize/FolderSize-2.5-x64.msi"
-ICONFILE=${ICON##*/}
-X86FILE=${X86##*/}
-AMD64FILE=${AMD64##*/}
-
-        if [ -e /var/tmp/opsi/upload/$TYPE/${PN}_${VERSION}-${RELEASE}.opsi ]
-        then
-                echo "package ${PN}_${VERSION}-${RELEASE}.opsi already generated"
-                exit 1
-        fi
-
-OUT=$(mktemp -d /tmp/output.XXXXXXXXXX) || { echo "Failed to create temp dir"; exit 1; }
-mkdir $OUT/$PN
-cp -Rv OPSI CLIENT_DATA $OUT/$PN
-unix2dos $OUT/$PN/CLIENT_DATA/*
-
-	if [ -e /usr/portage/distfiles/$ICONFILE ]
-	then
-		if [ -e $ICONFILE.sha1sum ]
-		then
-			SHA1SUM=`cat $ICONFILE.sha1sum`
-			CHECKSUM=`sha1sum /usr/portage/distfiles/$ICONFILE`
-			if [ "$CHECKSUM" = "$SHA1SUM" ]
-			then
-				convert -colorspace rgb /usr/portage/distfiles/$ICONFILE -transparent white -background transparent -resize 160x160\> \
-					-size 160x160 xc:transparent +swap -gravity center -composite $OUT/$PN/CLIENT_DATA/$PN.png
-#				convert -colorspace rgb /usr/portage/distfiles/$ICONFILE -resize x160 -gravity center -crop 160x160+0+0 +repage $OUT/$PN/CLIENT_DATA/$PN.png
-
-			else
-				echo "The checksums do not match."
-				exit 1
-			fi
-		else
-			echo "You need to create the checksums with: sha1sum /usr/portage/distfiles/$ICONFILE > $ICONFILE.sha1sum"
-			exit 1
-		fi
-	else
-		echo "Downloading file"
-		wget -P /usr/portage/distfiles/ $ICON
-		exit 1
-	fi
-
-	if [ -e /usr/portage/distfiles/$X86FILE ]
-	then
-		if [ -e $X86FILE.sha1sum ]
-		then
-			SHA1SUM=`cat $X86FILE.sha1sum`
-			CHECKSUM=`sha1sum /usr/portage/distfiles/$X86FILE`
-			if [ "$CHECKSUM" = "$SHA1SUM" ]
-			then
-				cp /usr/portage/distfiles/$X86FILE $OUT/$PN/CLIENT_DATA
-			else
-				echo "The checksums do not match."
-				exit 1
-			fi
-		else
-			echo "You need to create the checksums with: sha1sum /usr/portage/distfiles/$X86FILE > $X86FILE.sha1sum"
-			exit 1
-		fi
-	else
-		echo "Downloading file"
-		wget -P /usr/portage/distfiles/ $X86
-		exit 1
-	fi
-
-	if [ -e /usr/portage/distfiles/$AMD64FILE ]
-	then
-		if [ -e $AMD64FILE.sha1sum ]
-		then
-			SHA1SUM=`cat $AMD64FILE.sha1sum`
-			CHECKSUM=`sha1sum /usr/portage/distfiles/$AMD64FILE`
-			if [ "$CHECKSUM" = "$SHA1SUM" ]
-			then
-				cp /usr/portage/distfiles/$AMD64FILE $OUT/$PN/CLIENT_DATA
-			else
-				echo "The checksums do not match." 
-				exit 1
-			fi
-		else
-			echo "You need to create the checksums with: sha1sum /usr/portage/distfiles/$AMD64FILE > $AMD64FILE.sha1sum"
-			exit 1
-		fi
-	else
-		echo "Downloading file"
-		wget -P /usr/portage/distfiles/ $AMD64
-		exit 1
-	fi
-
-sed -e "s!VERSION!$VERSION!g" -e "s!RELEASE!$RELEASE!g" -e "s!PRIORITY!$PRIORITY!g" -e "s!ADVICE!$ADVICE!g" -i $OUT/$PN/OPSI/control
-sed -e "s!X86FILE!$X86FILE!g" -e "s!AMD64FILE!$AMD64FILE!g" -i $OUT/$PN/CLIENT_DATA/setup.ins
-
-if test -d ".git"; then
-    git log --date-order --date=short | \
-    sed -e '/^commit.*$/d' | \
-    awk '/^Author/ {sub(/\\$/,""); getline t; print $0 t; next}; 1' | \
-    sed -e 's/^Author: //g' | \
-    sed -e 's/>Date:   \([0-9]*-[0-9]*-[0-9]*\)/>\t\1/g' | \
-    sed -e 's/^\(.*\) \(\)\t\(.*\)/\3    \1    \2/g' > $OUT/$PN/OPSI/changelog.txt
-else
-    echo "No git repository present."
-    exit 1
-fi
-
-pushd $OUT
-opsi-makeproductfile -v $OUT/$PN
-popd
-
-mkdir -p /var/tmp/opsi/upload/$TYPE/
-cp -afv $OUT/*.opsi /var/tmp/opsi/upload/$TYPE/
-
-#rm -rf $OUT
-

builder-product.cfg

@@ -0,0 +1,41 @@
+############################
+# Setup product information 
+############################
+VENDOR="foldersize.sf.net"
+PN="sourceforge.foldersize"
+NAME="Folder Size"
+DESCRIPTION="Folder Size for Windows adds a new column to the Details view in Windows Explorer."
+VERSION="2.6"
+RELEASE="3"
+PRIORITY="0"
+ADVICE=""
+
+# TYPE - defines, if the install files are public or restricted. 
+# Valid value: restricted | public
+TYPE="public"
+
+
+DL_FILE[0]="left_folder.png"
+DL_SOURCE[0]="http://cdn1.iconfinder.com/data/icons/bloggers-1-to-7-vol-PNG/128/left_folder.png"
+
+DL_FILE[1]="FolderSize-${VERSION}-x86.msi"
+DL_SOURCE[1]="http://sourceforge.net/projects/foldersize/files/foldersize/2.6/FolderSize-${VERSION}-x86.msi"
+DL_ARCH[1]="X86"
+DL_WINST_NAME[1]=Install32Msi
+
+DL_FILE[2]="FolderSize-${VERSION}-x64.msi"
+DL_SOURCE[2]="http://sourceforge.net/projects/foldersize/files/foldersize/2.6/FolderSize-${VERSION}-x64.msi"
+DL_ARCH[2]="X86_64"
+DL_WINST_NAME[2]=Install64Msi
+
+# File array index for the image showing while installing the program
+ICON_DL_INDEX=0
+
+OPSI_INI_SECTION[0]="X86"
+OPSI_INI_OPTION[0]="MsiId32"
+OPSI_INI_VALUE[0]="{FC8D21C8-7B29-4104-ADB0-FEE9CA1C7922}"
+
+OPSI_INI_SECTION[1]="X86_64"
+OPSI_INI_OPTION[1]="MsiId64"
+OPSI_INI_VALUE[1]="{F24FF688-7138-4CCF-A83F-71E9FB01170E}"
+

builder-targets-cb.sh

@@ -0,0 +1,25 @@
+##############################################################################
+# This optional file "builder-targets-cb.sh" will be called by builder.sh 
+# 
+# The targets will be called from thde opsi-builder using the following
+# order: config, prepare, retrieve, create, package, publish, commit, cleanup 
+# You can overwrite the target functions in builder-targets-cb.sh
+# 
+# You can define callback functions. The functions are called from
+# opsi-builder within processing a target
+#   cb_package_makeproductfile
+#
+# You can use every variable defined in any configuration file or by
+# the defined builder script itself. Also, calling the predefined
+# targets builder_<targetname> is possible.
+#
+# Abstract:
+#  target order: config, prepare, retrieve, create, package, publish, commit, cleanup
+#  callbacks: <none>
+#
+##############################################################################
+
+function cleanup() {
+    echo "Cleanup"
+    builder_cleanup
+}