diff --git a/sample/64bit/installer/license/CLIENT_DATA/delsub64.ins b/sample/64bit/installer/license/CLIENT_DATA/delsub64.ins new file mode 100644 index 0000000..a67e86a --- /dev/null +++ b/sample/64bit/installer/license/CLIENT_DATA/delsub64.ins @@ -0,0 +1,88 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib gmbh +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/en/credits/ + + +Set $UninstallProgram$ = $InstallDir$ + "\uninstall.exe" +Set $IniFile$ = $InstallDir$ + "\opsi-" + $ProductId$ + ".ini" + +Message "Uninstalling " + $ProductId$ + " ..." + +if FileExists($UninstallProgram$) + comment "Uninstall program found, starting uninstall" + Winbatch_uninstall + sub_check_exitcode +endif +comment "Delete files" +Files_uninstall /64Bit + +comment "Cleanup registry" +Registry_uninstall /64Bit + +comment "Delete program shortcuts" +LinkFolder_uninstall + +[Winbatch_uninstall] +; Choose one of the following examples as basis for program uninstall +; +; === Nullsoft Scriptable Install System ================================================================ +; maby better Call as +; Winbatch_uninstall /WaitforProcessending "Au_.exe" /Timeoutseconds 10 +; "$UninstallProgram$" /S +; +; === Inno Setup ======================================================================================== +; "$UninstallProgram$" /silent /norestart /SUPPRESSMSGBOXES /nocancel + + +[Files_uninstall] +; Example for recursively deleting the installation directory: +; +; del -sf "$InstallDir$\" + +[Registry_uninstall] +; Example of deleting a registry key: +; +; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$] + +[LinkFolder_uninstall] +; Example of deleting a folder from AllUsers startmenu: +; +; set_basefolder common_programs +; delete_subfolder $ProductId$ +; +; Example of deleting a shortcut from AllUsers desktop: +; +; set_basefolder common_desktopdirectory +; set_subfolder "" +; delete_element $ProductId$ + +[Sub_check_exitcode] +comment "Test for installation success via exit code" +set $ExitCode$ = getLastExitCode +; informations to exit codes see +; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx +; http://msdn.microsoft.com/en-us/library/aa368542.aspx +if ($ExitCode$ = "0") + comment "Looks good: setup program gives exitcode zero" +else + comment "Setup program gives a exitcode unequal zero: " + $ExitCode$ + if ($ExitCode$ = "1605") + comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed." + comment "Uninstall of a not installed product failed - no problem" + else + if ($ExitCode$ = "1641") + comment "looks good: setup program gives exitcode 1641" + comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success." + else + if ($ExitCode$ = "3010") + comment "looks good: setup program gives exitcode 3010" + comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success." + else + logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$ + isFatalError + endif + endif + endif +endif + diff --git a/sample/64bit/installer/license/CLIENT_DATA/login.ins b/sample/64bit/installer/license/CLIENT_DATA/login.ins new file mode 100644 index 0000000..7b85744 --- /dev/null +++ b/sample/64bit/installer/license/CLIENT_DATA/login.ins @@ -0,0 +1,24 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib gmbh +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/en/credits/ + +[Actions] +Message "Profile Patch for VLC ...." + +comment "Did we run this script before ? - and set version stamp in profile" +if getValue("installationstate", getProductMap) = "installed" + comment "Product is installed" + if not (scriptWasExecutedBefore) + comment "loginscript was not run yet " + Files_profile_copy + Registry_currentuser_set + endif +endif + +[Files_profile_copy] +copy "%Scriptpath%\profiles\*.*" "%CurrentAppdataDir%\ACME" + +[Registry_currentuser_set] +openkey [HKCU\Software\ACME] +set "show_greeting_window" = "no" diff --git a/sample/64bit/installer/license/CLIENT_DATA/opsi-PN.ini b/sample/64bit/installer/license/CLIENT_DATA/opsi-PN.ini new file mode 100644 index 0000000..978f02e --- /dev/null +++ b/sample/64bit/installer/license/CLIENT_DATA/opsi-PN.ini @@ -0,0 +1,11 @@ +[X86] +MsiId={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} +MsiId32={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} + +[X86_64] +MsiId={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} +MsiId64={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} + +[COMMON] +PN=name +VERSION=version diff --git a/sample/64bit/installer/license/CLIENT_DATA/setup64.ins b/sample/64bit/installer/license/CLIENT_DATA/setup64.ins new file mode 100644 index 0000000..0a0e689 --- /dev/null +++ b/sample/64bit/installer/license/CLIENT_DATA/setup64.ins @@ -0,0 +1,227 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/en/credits/ + +[Actions] +requiredWinstVersion >= "4.11.2.6" + +DefVar $UninstallProgram$ +DefVar $IniFile$ +DefVar $IniCfgFile$ +DefVar $LogDir$ +DefVar $ProductId$ +DefVar $MinimumSpace$ +DefVar $InstallDir$ +DefVar $ExitCode$ +DefVar $LicenseRequired$ +DefVar $LicenseKey$ +DefVar $LicensePool$ + +Set $LogDir$ = "%SystemDrive%\tmp" + +; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh +; and adds the following variables: +; from builder-product.cfg : all variables definded by attribute WINST[index] +; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE +; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL +; auto generated winst-variables +; $IconFile$: path to product picture +; +@@BUILDER_VARIABLES@@ + +; ---------------------------------------------------------------- +; - Please edit the following values - +; ---------------------------------------------------------------- +;$ProductId$ should be the name of the product in opsi +; therefore please: only lower letters, no umlauts, +; no white space use '-' as a seperator +Set $MinimumSpace$ = "1 MB" +; the path were we find the product after the installation +Set $InstallDir$ = "%ProgramFiles64Dir%\" +Set $LicenseRequired$ = "false" +Set $LicensePool$ = "p_" + $ProductId$ +; ---------------------------------------------------------------- + +Set $IniCfgFile$ = "%ScriptPath%\opsi-" + $ProductId$ + ".ini" + +if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$)) + LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$ + isFatalError + ; Stop process and set installation status to failed +else + comment "Show product picture" + ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ + + if FileExists("%ScriptPath%\delsub64.ins") + comment "Start uninstall sub section" + Sub "%ScriptPath%\delsub64.ins" + endif + + Message "Installing " + $ProductId$ + " ..." + + if $LicenseRequired$ = "true" + comment "Licensing required, reserve license and get license key" + Sub_get_licensekey + endif + + comment "Start setup program" + ChangeDirectory "%SCRIPTPATH%" + Winbatch_install + Sub_check_exitcode + + comment "Copy files" + Files_install /64Bit + + comment "Patch Registry" + Registry_install /64Bit + + comment "Create shortcuts" + LinkFolder_install + +endif + +[Winbatch_install] +; Choose one of the following examples as basis for your installation +; You can use $LicenseKey$ var to pass a license key to the installer +; +; === Nullsoft Scriptable Install System ================================================================ +; "%ScriptPath%\Setup.exe" /S +; +; === MSI package ======================================================================================= +; You may use the parameter PIDKEY=$Licensekey$ +; msiexec /i "%ScriptPath%\some.msi" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=1 REBOOT=ReallySuppress +; +; === InstallShield + MSI===================================================================================== +; Attention: The path to the log file should not contain any whitespaces +; "%ScriptPath%\setup.exe" /s /v" /l* $LogDir$\$ProductId$.install_log.txt /qb! ALLUSERS=1 REBOOT=ReallySuppress" +; "%ScriptPath%\setup.exe" /s /v" /qb! ALLUSERS=2 REBOOT=ReallySuppress" +; +; === InstallShield ===================================================================================== +; Create setup.iss answer file by running: setup.exe /r /f1"c:\setup.iss" +; You may use an answer file by the parameter /f1"c:\setup.iss" +; "%ScriptPath%\setup.exe" /s /sms /f2"$LogDir$\$ProductId$.install_log.txt" +; +; === Inno Setup ======================================================================================== +; http://unattended.sourceforge.net/InnoSetup_Switches_ExitCodes.html +; You may create setup answer file by: setup.exe /SAVEINF="filename" +; You may use an answer file by the parameter /LOADINF="filename" +; "%ScriptPath%\setup.exe" /sp- /silent /norestart /nocancel /SUPPRESSMSGBOXES + +[Files_install] +; copy the ini file to the InstallDir +copy "$IniCfgFile$" "$InstallDir$" + +; Example of recursively copying some files into the installation directory: +; +; copy -s "%ScriptPath%\files\*.*" "$InstallDir$" + +[Registry_install] +; Example of setting some values of an registry key: +; +; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$] +; set "name1" = "some string value" +; set "name2" = REG_DWORD:0001 +; set "name3" = REG_BINARY:00 af 99 cd + +[LinkFolder_install] +; Example of deleting a folder from AllUsers startmenu: +; +; set_basefolder common_programs +; delete_subfolder $ProductId$ +; +; Example of creating an shortcut to the installed exe in AllUsers startmenu: +; +; set_basefolder common_programs +; set_subfolder $ProductId$ +; +; set_link +; name: $ProductId$ +; target: +; parameters: +; working_dir: $InstallDir$ +; icon_file: +; icon_index: +; end_link +; +; Example of creating an shortcut to the installed exe on AllUsers desktop: +; +; set_basefolder common_desktopdirectory +; set_subfolder "" +; +; set_link +; name: $ProductId$ +; target: +; parameters: +; working_dir: $InstallDir$ +; icon_file: +; icon_index: 2 +; end_link + +[Sub_get_licensekey] +if opsiLicenseManagementEnabled + comment "License management is enabled and will be used" + + comment "Trying to get a license key" + Set $LicenseKey$ = demandLicenseKey ($LicensePool$) + ; If there is an assignment of exactly one licensepool to the product the following call is possible: + ; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$) + ; + ; If there is an assignment of a license pool to a windows software id, it is possible to use: + ; DefVar $WindowsSoftwareId$ + ; $WindowsSoftwareId$ = "..." + ; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$) + + DefVar $ServiceErrorClass$ + set $ServiceErrorClass$ = getLastServiceErrorClass + comment "Error class: " + $ServiceErrorClass$ + + if $ServiceErrorClass$ = "None" + comment "Everything fine, we got the license key '" + $LicenseKey$ + "'" + else + if $ServiceErrorClass$ = "LicenseConfigurationError" + LogError "Fatal: license configuration must be corrected" + LogError getLastServiceErrorMessage + isFatalError + else + if $ServiceErrorClass$ = "LicenseMissingError" + LogError "Fatal: required license is not supplied" + isFatalError + endif + endif + endif +else + LogError "Fatal: license required, but license management not enabled" + isFatalError +endif + + +[Sub_check_exitcode] +comment "Test for installation success via exit code" +set $ExitCode$ = getLastExitCode +; informations to exit codes see +; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx +; http://msdn.microsoft.com/en-us/library/aa368542.aspx +if ($ExitCode$ = "0") + comment "Looks good: setup program gives exitcode zero" +else + comment "Setup program gives a exitcode unequal zero: " + $ExitCode$ + if ($ExitCode$ = "1605") + comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed." + comment "Uninstall of a not installed product failed - no problem" + else + if ($ExitCode$ = "1641") + comment "looks good: setup program gives exitcode 1641" + comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success." + else + if ($ExitCode$ = "3010") + comment "looks good: setup program gives exitcode 3010" + comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success." + else + logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$ + isFatalError + endif + endif + endif +endif + diff --git a/sample/64bit/installer/license/CLIENT_DATA/uninstall64.ins b/sample/64bit/installer/license/CLIENT_DATA/uninstall64.ins new file mode 100644 index 0000000..263f773 --- /dev/null +++ b/sample/64bit/installer/license/CLIENT_DATA/uninstall64.ins @@ -0,0 +1,70 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib gmbh +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/en/credits/ + +[Actions] +requiredWinstVersion >= "4.11.2.6" + +DefVar $UninstallProgram$ +DefVar $IniFile$ +DefVar $IniCfgFile$ +DefVar $LogDir$ +DefVar $ExitCode$ +DefVar $ProductId$ +DefVar $InstallDir$ +DefVar $LicenseRequired$ +DefVar $LicensePool$ + +Set $LogDir$ = "%SystemDrive%\tmp" + +; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh +; and adds the following variables: +; from builder-product.cfg : all variables definded by attribute WINST[index] +; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE +; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL +; auto generated winst-variables +; $IconFile$: path to product picture +; +@@BUILDER_VARIABLES@@ + +; ---------------------------------------------------------------- +; - Please edit the following values - +; ---------------------------------------------------------------- +Set $InstallDir$ = "%ProgramFiles64Dir%\" +Set $LicenseRequired$ = "false" +Set $LicensePool$ = "p_" + $ProductId$ +; ---------------------------------------------------------------- + +Set $IniCfgFile$ = "%ScriptPath%\opsi-" + $ProductId$ + ".ini" + +comment "Show product picture" +ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ + +Message "Uninstalling " + $ProductId$ + " ..." + +if FileExists("%ScriptPath%\delsub64.ins") + comment "Start uninstall sub section" + Sub "%ScriptPath%\delsub64.ins" +endif + +if $LicenseRequired$ = "true" + comment "Licensing required, free license used" + Sub_free_license +endif + +[Sub_free_license] +comment "License management is enabled and will be used" + +comment "Trying to free license used for the product" +DefVar $result$ +Set $result$ = FreeLicense($LicensePool$) +; If there is an assignment of a license pool to the product, it is possible to use +; Set $result$ = FreeLicense("", $ProductId$) +; +; If there is an assignment of a license pool to a windows software id, it is possible to use +; DefVar $WindowsSoftwareId$ +; $WindowsSoftwareId$ = "..." +; set $result$ = FreeLicense("", "", $WindowsSoftwareId$) + + diff --git a/sample/64bit/installer/license/OPSI/changelog.txt b/sample/64bit/installer/license/OPSI/changelog.txt new file mode 100644 index 0000000..bc69317 --- /dev/null +++ b/sample/64bit/installer/license/OPSI/changelog.txt @@ -0,0 +1,2 @@ +Don't add cahngelog entries here! +It get autogenerated by the opsi-builder.sh \ No newline at end of file diff --git a/sample/64bit/installer/license/OPSI/control b/sample/64bit/installer/license/OPSI/control new file mode 100644 index 0000000..f203124 --- /dev/null +++ b/sample/64bit/installer/license/OPSI/control @@ -0,0 +1,30 @@ +[Package] +version: 2 +depends: +incremental: False + +[Product] +type: localboot +id: opsi-template +name: opsi template product +description: A template for opsi products +advice: +version: 4.0.2 +priority: 0 +licenseRequired: True +productClasses: +setupScript: setup64.ins +uninstallScript: uninstall64.ins +updateScript: +alwaysScript: +onceScript: +customScript: +userLoginScript: + +[ProductDependency] +action: setup +requiredProduct: sereby.aio +requiredStatus: installed +requirementType: before + + diff --git a/sample/64bit/installer/license/OPSI/postinst b/sample/64bit/installer/license/OPSI/postinst new file mode 100644 index 0000000..a8e33fc --- /dev/null +++ b/sample/64bit/installer/license/OPSI/postinst @@ -0,0 +1,9 @@ +#! /bin/sh +# +# postinst script for softprod +# This script executes after unpacking files from that archive and registering the product at the server. +# +# The following environment variables can be used to obtain information about the current installation: +# PRODUCT_ID: id of the current product +# CLIENT_DATA_DIR: directory which contains the installed client data +# diff --git a/sample/64bit/installer/license/OPSI/preinst b/sample/64bit/installer/license/OPSI/preinst new file mode 100644 index 0000000..15a5320 --- /dev/null +++ b/sample/64bit/installer/license/OPSI/preinst @@ -0,0 +1,9 @@ +#! /bin/sh +# +# preinst script for softprod +# This script executes before that package will be unpacked from its archive file. +# +# The following environment variables can be used to obtain information about the current installation: +# PRODUCT_ID: id of the current product +# CLIENT_DATA_DIR: directory where client data will be installed +# diff --git a/sample/64bit/installer/license/Testing.txt b/sample/64bit/installer/license/Testing.txt new file mode 100644 index 0000000..d6b5e6c --- /dev/null +++ b/sample/64bit/installer/license/Testing.txt @@ -0,0 +1,28 @@ +*** Qualitiymanagement/Testing procedure + +- Product: + - Name: productname + - Version: xxx + - Release: yyyy + +- Environment + - OS: Native windows XP-32Bit installation + - Preinstalled packages: None (also no aio) + - Files used while testing: + File1: http://domain.de/file.ext + +- Testing process: + OPSI-action: + - Installation (without dependencies like AIO/Firefox): ?? + Result: + - File extensions related to program: ?? + - Start menu entry: ?? + - Starting/using program: viewer works, File1 is shown correctly: ?? + + OPSI-action: + - Uninstall + Result: + - File extensions related to program: unrelated: ?? + - Start menu entry: none: ?? + + diff --git a/sample/64bit/installer/license/builder-product.cfg b/sample/64bit/installer/license/builder-product.cfg new file mode 100644 index 0000000..c8f35f6 --- /dev/null +++ b/sample/64bit/installer/license/builder-product.cfg @@ -0,0 +1,150 @@ +############################ +# Setup product information +############################ +VENDOR="itwatch.de" +PN="itwatch" +NAME="7-Zip" +DESCRIPTION="7-Zip is a file archiver with a high compression ratio." +VERSION="4.10.19" +RELEASE="3" +PRIORITY="0" +ADVICE="" + +# TYPE - defines, if the install files are public or restricted. +# Valid value: restricted | public +TYPE="public" + +################# +# Downloader (DL) object array +################ +# +# To build the opsi-packet, some files are needed. The files are defined by a file object. +# A file object contains different attributes. All attributes (FILE, SOURCE, ..) are binded together +# using a file index. +# +# Target "prepare" : Working directory INST_DIR and OUTPUT_DIR are prepared +# Target "retrieve" : the files are downloaded to the the caching storage ${DIST_CACHE_DIR}/$DL_ARCH[i]/$DL_FILE[i] +# Target "create" : the files are extrated/copied to ${INST_DIR}/CLIENT_DATA/${DL_ARCH[$i]} +# Target "package" : opsi-makeproductfile is called processing ${INST_DIR} directory +# +# - Filename +# Filename used inside the builder and opsi package +# Mandatory parameter. +# DL_FILE[index]="cool-stuff.exe" +# +# - Source URL +# The source URL to download the file from. Multiple URLs are separted by a ";" or "," +# The $DIST_PRIVATE_REPOS variable will be added as the first URL automatically +# Therefore, you download the non-public programs to your local/privagte repository. +# You can use variable like $PN or $Version inside the URLs +# DL_SOURCE[index]="http://cool-stuff.de/download/cool-stuff_1.001.exe;http://mirro5.cool-stuff.at/$PN_$VERSION.exe" +# +# - Architecture +# Definition of the architecture to separate different files. This will be used in +# the file structure inside the opsi-package. Also, you can use it in your repos-URL's +# or filenames (OPSI_REPOS_FILE_PATTERN, OPSI_REPOS_PRODUCT_DIR) to structure the repos. +# If it's a file for all architecture, the variable have not to be set. +# Optional parameter. Default value: +# Valid values: , "X86", "X86_64" +# DL_ARCH[index]="X86" +# +# - WINST variable: +# You can access the file (included in the opsi-package) using WINST script language. +# The target "package" will replace all occurence of the string "@@BUILDER_VARIABLES@@" +# by pairs of "DefVar/Set"-commands, if the WINST attribute is set. Default value: +# Optional parameter. Default value: , +# DL_WINST_NAME[index]=itWESS +# +# - Compression format +# If the retrieved file is compressed, the compression format is specified to +# extract it. If the parameter is not set, no extraction happens +# Optional parameter. Valid values: unzip, 7zip. Default value: . +# DL_EXTRACT_FORMAT="zip" +# +# - Extraction directory for compressed files +# This Variable only works in combination with INSTALL and forces the extraction +# to be done into the specified directory. +# This will result in the files to be extracted to ${OUTPUT_DIR}/${DL_ARCH}/${DL_EXTRACT_TO}. +# This feature is mostly needed if a package includes more setup programms that are nemed the +# same. This way you place the setups into diffent dirs +# Optional parameter. Default value: +# DL_EXTRACT_TO[index]="office" +# +# - Specify Downloader +# Defines the downloader to use to retrieve the SOURCE file +# Optional parameter. Valid values: wget|plowdown. Default value: wget +# + +DL_FILE[0]="itWatchLogo.jpg" +DL_SOURCE[0]="http://www.itwatch.de/logos/itWatchLogo.jpg" + +DL_FILE[1]="itWESS-Client_German.msi" +DL_SOURCE[1]="http://repos.dtnet.de/itwatch/itwatch/4.10.19/itWESS-Client_German.msi;http://internal.graz.disconnected-by-peer.at/Orig/itWatch/itWESS/HB/4.10.19/itWESS-Client_German.msi" +DL_ARCH[1]="X86" +DL_WINST_NAME[1]=itWESS + +DL_FILE[2]="itWESS-64bit_German.msi" +DL_SOURCE[2]="http://repos.dtnet.de/itwatch/itwatch/4.10.19/itWESS-64bit_German.msi;http://internal.graz.disconnected-by-peer.at/Orig/itWatch/itWESS/HB/4.10.19/itWESS-64bit_German.msi" +DL_ARCH[2]="X86_64" +DL_WINST_NAME[2]=itWESS64 + +DL_FILE[3]="AiO-Runtimes-x86-v1.7.1.7z" +DL_SOURCE[3]="http://ftp.computerbase.de/dl-758/weJMhoTGCTbFI5mzRnMlAg/1327825564/AiO-Runtimes-x86-v1.7.1.7z" +DL_ARCH[3]="X86" +DL_DOWNLOADER[3]="wget" +DL_EXTRACT_FORMAT[3]="unzip" +DL_EXTRACT_TO[3]="office" + +# File array index for the image showing while installing the program +ICON_DL_INDEX=0 + +######################### +# Setup additional, custom WINST variables +# which will be injected to the *.ins files (replaces token @@BUILDER_VARIABLES@@ ) +# +# The following tokens inside the WINST_VALUE will be replaced dynamically +# +# @DL_EXTRACT_WINST_PATH[]@ : contains the WINST location of the directory, the files from DL_FILE[] was extracted to. +# Sample: +# WINST_VALUE[1]="@DL_EXTRACT_WINST_PATH[]@\\svcpack\\aio-runtimes.exe" +# results in "%ScriptPath%\X86_64\svcpack\aio-runtimes.exe" +# +######################### +WINST_NAME[0]="InstallExe" +WINST_VALUE[0]="@DL_EXTRACT_WINST_PATH[2]@\\svcpack\\aio-runtimes.exe" + +WINST_NAME[1]="MyVar" +WINST_VALUE[1]="My content" + +######################### +# Setup required OPSI_INI variables +# which will be injected to the opsi-PN.ini files +# +# if your package is not msi based then you can remove the msi part from *.ins files and drop this variables compleatly +# !!! These Variables are requred if you remove them in this cfg file you will get error's about not defined Variables !!! +# +######################### +# if the packaga just supports X86 OR X86_64 (setupXX.ins delsubXX.ins uninstallXX.ins) then you have to just specify one MsiId + +OPSI_INI_SECTION[0]="X86" +OPSI_INI_OPTION[0]="MsiId" +OPSI_INI_VALUE[0]="{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}" + +# OR + +OPSI_INI_SECTION[0]="X86_64" +OPSI_INI_OPTION[0]="MsiId" +OPSI_INI_VALUE[0]="{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}" + +# if the package supports X86 AND X86_64 (setup3264.ins delsub3264.ins uninstall3264.ins) then you have to specify 2 MsiId's + +OPSI_INI_SECTION[0]="X86" +OPSI_INI_OPTION[0]="MsiId32" +OPSI_INI_VALUE[0]="{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}" + +# AND + +OPSI_INI_SECTION[1]="X86_64" +OPSI_INI_OPTION[1]="MsiId64" +OPSI_INI_VALUE[1]="{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}" + diff --git a/sample/64bit/installer/license/builder-targets-cb.sh b/sample/64bit/installer/license/builder-targets-cb.sh new file mode 100644 index 0000000..9a3d4a8 --- /dev/null +++ b/sample/64bit/installer/license/builder-targets-cb.sh @@ -0,0 +1,25 @@ +############################################################################## +# This optional file "builder-targets-cb.sh" will be called by builder.sh +# +# The targets will be called from thde opsi-builder using the following +# order: config, prepare, retrieve, create, package, publish, commit, cleanup +# You can overwrite the target functions in builder-targets-cb.sh +# +# You can define callback functions. The functions are called from +# opsi-builder within processing a target +# cb_package_makeproductfile +# +# You can use every variable defined in any configuration file or by +# the defined builder script itself. Also, calling the predefined +# targets builder_ is possible. +# +# Abstract: +# target order: config, prepare, retrieve, create, package, publish, commit, cleanup +# callbacks: +# +############################################################################## + +function cleanup() { + echo "Cleanup" + builder_cleanup +} diff --git a/sample/64bit/installer/nolicense/CLIENT_DATA/delsub64.ins b/sample/64bit/installer/nolicense/CLIENT_DATA/delsub64.ins new file mode 100644 index 0000000..a67e86a --- /dev/null +++ b/sample/64bit/installer/nolicense/CLIENT_DATA/delsub64.ins @@ -0,0 +1,88 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib gmbh +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/en/credits/ + + +Set $UninstallProgram$ = $InstallDir$ + "\uninstall.exe" +Set $IniFile$ = $InstallDir$ + "\opsi-" + $ProductId$ + ".ini" + +Message "Uninstalling " + $ProductId$ + " ..." + +if FileExists($UninstallProgram$) + comment "Uninstall program found, starting uninstall" + Winbatch_uninstall + sub_check_exitcode +endif +comment "Delete files" +Files_uninstall /64Bit + +comment "Cleanup registry" +Registry_uninstall /64Bit + +comment "Delete program shortcuts" +LinkFolder_uninstall + +[Winbatch_uninstall] +; Choose one of the following examples as basis for program uninstall +; +; === Nullsoft Scriptable Install System ================================================================ +; maby better Call as +; Winbatch_uninstall /WaitforProcessending "Au_.exe" /Timeoutseconds 10 +; "$UninstallProgram$" /S +; +; === Inno Setup ======================================================================================== +; "$UninstallProgram$" /silent /norestart /SUPPRESSMSGBOXES /nocancel + + +[Files_uninstall] +; Example for recursively deleting the installation directory: +; +; del -sf "$InstallDir$\" + +[Registry_uninstall] +; Example of deleting a registry key: +; +; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$] + +[LinkFolder_uninstall] +; Example of deleting a folder from AllUsers startmenu: +; +; set_basefolder common_programs +; delete_subfolder $ProductId$ +; +; Example of deleting a shortcut from AllUsers desktop: +; +; set_basefolder common_desktopdirectory +; set_subfolder "" +; delete_element $ProductId$ + +[Sub_check_exitcode] +comment "Test for installation success via exit code" +set $ExitCode$ = getLastExitCode +; informations to exit codes see +; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx +; http://msdn.microsoft.com/en-us/library/aa368542.aspx +if ($ExitCode$ = "0") + comment "Looks good: setup program gives exitcode zero" +else + comment "Setup program gives a exitcode unequal zero: " + $ExitCode$ + if ($ExitCode$ = "1605") + comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed." + comment "Uninstall of a not installed product failed - no problem" + else + if ($ExitCode$ = "1641") + comment "looks good: setup program gives exitcode 1641" + comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success." + else + if ($ExitCode$ = "3010") + comment "looks good: setup program gives exitcode 3010" + comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success." + else + logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$ + isFatalError + endif + endif + endif +endif + diff --git a/sample/64bit/installer/nolicense/CLIENT_DATA/login.ins b/sample/64bit/installer/nolicense/CLIENT_DATA/login.ins new file mode 100644 index 0000000..7b85744 --- /dev/null +++ b/sample/64bit/installer/nolicense/CLIENT_DATA/login.ins @@ -0,0 +1,24 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib gmbh +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/en/credits/ + +[Actions] +Message "Profile Patch for VLC ...." + +comment "Did we run this script before ? - and set version stamp in profile" +if getValue("installationstate", getProductMap) = "installed" + comment "Product is installed" + if not (scriptWasExecutedBefore) + comment "loginscript was not run yet " + Files_profile_copy + Registry_currentuser_set + endif +endif + +[Files_profile_copy] +copy "%Scriptpath%\profiles\*.*" "%CurrentAppdataDir%\ACME" + +[Registry_currentuser_set] +openkey [HKCU\Software\ACME] +set "show_greeting_window" = "no" diff --git a/sample/64bit/installer/nolicense/CLIENT_DATA/opsi-PN.ini b/sample/64bit/installer/nolicense/CLIENT_DATA/opsi-PN.ini new file mode 100644 index 0000000..978f02e --- /dev/null +++ b/sample/64bit/installer/nolicense/CLIENT_DATA/opsi-PN.ini @@ -0,0 +1,11 @@ +[X86] +MsiId={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} +MsiId32={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} + +[X86_64] +MsiId={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} +MsiId64={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} + +[COMMON] +PN=name +VERSION=version diff --git a/sample/64bit/installer/nolicense/CLIENT_DATA/setup64.ins b/sample/64bit/installer/nolicense/CLIENT_DATA/setup64.ins new file mode 100644 index 0000000..d2309ae --- /dev/null +++ b/sample/64bit/installer/nolicense/CLIENT_DATA/setup64.ins @@ -0,0 +1,179 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/en/credits/ + +[Actions] +requiredWinstVersion >= "4.11.2.6" + +DefVar $UninstallProgram$ +DefVar $IniFile$ +DefVar $IniCfgFile$ +DefVar $LogDir$ +DefVar $ProductId$ +DefVar $MinimumSpace$ +DefVar $InstallDir$ +DefVar $ExitCode$ + +Set $LogDir$ = "%SystemDrive%\tmp" + +; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh +; and adds the following variables: +; from builder-product.cfg : all variables definded by attribute WINST[index] +; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE +; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL +; auto generated winst-variables +; $IconFile$: path to product picture +; +@@BUILDER_VARIABLES@@ + +; ---------------------------------------------------------------- +; - Please edit the following values - +; ---------------------------------------------------------------- +;$ProductId$ should be the name of the product in opsi +; therefore please: only lower letters, no umlauts, +; no white space use '-' as a seperator +Set $MinimumSpace$ = "1 MB" +; the path were we find the product after the installation +Set $InstallDir$ = "%ProgramFiles64Dir%\" +; ---------------------------------------------------------------- + +Set $IniCfgFile$ = "%ScriptPath%\opsi-" + $ProductId$ + ".ini" + +if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$)) + LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$ + isFatalError + ; Stop process and set installation status to failed +else + comment "Show product picture" + ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ + + if FileExists("%ScriptPath%\delsub64.ins") + comment "Start uninstall sub section" + Sub "%ScriptPath%\delsub64.ins" + endif + + Message "Installing " + $ProductId$ + " ..." + + comment "Start setup program" + ChangeDirectory "%SCRIPTPATH%" + Winbatch_install + Sub_check_exitcode + + comment "Copy files" + Files_install /64Bit + + comment "Patch Registry" + Registry_install /64Bit + + comment "Create shortcuts" + LinkFolder_install + +endif + +[Winbatch_install] +; Choose one of the following examples as basis for your installation +; You can use $LicenseKey$ var to pass a license key to the installer +; +; === Nullsoft Scriptable Install System ================================================================ +; "%ScriptPath%\Setup.exe" /S +; +; === MSI package ======================================================================================= +; You may use the parameter PIDKEY=$Licensekey$ +; msiexec /i "%ScriptPath%\some.msi" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=1 REBOOT=ReallySuppress +; +; === InstallShield + MSI===================================================================================== +; Attention: The path to the log file should not contain any whitespaces +; "%ScriptPath%\setup.exe" /s /v" /l* $LogDir$\$ProductId$.install_log.txt /qb! ALLUSERS=1 REBOOT=ReallySuppress" +; "%ScriptPath%\setup.exe" /s /v" /qb! ALLUSERS=2 REBOOT=ReallySuppress" +; +; === InstallShield ===================================================================================== +; Create setup.iss answer file by running: setup.exe /r /f1"c:\setup.iss" +; You may use an answer file by the parameter /f1"c:\setup.iss" +; "%ScriptPath%\setup.exe" /s /sms /f2"$LogDir$\$ProductId$.install_log.txt" +; +; === Inno Setup ======================================================================================== +; http://unattended.sourceforge.net/InnoSetup_Switches_ExitCodes.html +; You may create setup answer file by: setup.exe /SAVEINF="filename" +; You may use an answer file by the parameter /LOADINF="filename" +; "%ScriptPath%\setup.exe" /sp- /silent /norestart /nocancel /SUPPRESSMSGBOXES + +[Files_install] +; copy the ini file to the InstallDir +copy "$IniCfgFile$" "$InstallDir$" + +; Example of recursively copying some files into the installation directory: +; +; copy -s "%ScriptPath%\files\*.*" "$InstallDir$" + +[Registry_install] +; Example of setting some values of an registry key: +; +; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$] +; set "name1" = "some string value" +; set "name2" = REG_DWORD:0001 +; set "name3" = REG_BINARY:00 af 99 cd + +[LinkFolder_install] +; Example of deleting a folder from AllUsers startmenu: +; +; set_basefolder common_programs +; delete_subfolder $ProductId$ +; +; Example of creating an shortcut to the installed exe in AllUsers startmenu: +; +; set_basefolder common_programs +; set_subfolder $ProductId$ +; +; set_link +; name: $ProductId$ +; target: +; parameters: +; working_dir: $InstallDir$ +; icon_file: +; icon_index: +; end_link +; +; Example of creating an shortcut to the installed exe on AllUsers desktop: +; +; set_basefolder common_desktopdirectory +; set_subfolder "" +; +; set_link +; name: $ProductId$ +; target: +; parameters: +; working_dir: $InstallDir$ +; icon_file: +; icon_index: 2 +; end_link + +[Sub_check_exitcode] +comment "Test for installation success via exit code" +set $ExitCode$ = getLastExitCode +; informations to exit codes see +; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx +; http://msdn.microsoft.com/en-us/library/aa368542.aspx +if ($ExitCode$ = "0") + comment "Looks good: setup program gives exitcode zero" +else + comment "Setup program gives a exitcode unequal zero: " + $ExitCode$ + if ($ExitCode$ = "1605") + comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed." + comment "Uninstall of a not installed product failed - no problem" + else + if ($ExitCode$ = "1641") + comment "looks good: setup program gives exitcode 1641" + comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success." + else + if ($ExitCode$ = "3010") + comment "looks good: setup program gives exitcode 3010" + comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success." + else + logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$ + isFatalError + endif + endif + endif +endif + diff --git a/sample/64bit/installer/nolicense/CLIENT_DATA/uninstall64.ins b/sample/64bit/installer/nolicense/CLIENT_DATA/uninstall64.ins new file mode 100644 index 0000000..cec2eef --- /dev/null +++ b/sample/64bit/installer/nolicense/CLIENT_DATA/uninstall64.ins @@ -0,0 +1,66 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib gmbh +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/en/credits/ + +[Actions] +requiredWinstVersion >= "4.11.2.6" + +DefVar $UninstallProgram$ +DefVar $IniFile$ +DefVar $IniCfgFile$ +DefVar $LogDir$ +DefVar $ExitCode$ +DefVar $ProductId$ +DefVar $InstallDir$ + +Set $LogDir$ = "%SystemDrive%\tmp" + +; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh +; and adds the following variables: +; from builder-product.cfg : all variables definded by attribute WINST[index] +; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE +; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL +; auto generated winst-variables +; $IconFile$: path to product picture +; +@@BUILDER_VARIABLES@@ + +; ---------------------------------------------------------------- +; - Please edit the following values - +; ---------------------------------------------------------------- +Set $InstallDir$ = "%ProgramFiles64Dir%\" +; ---------------------------------------------------------------- + +Set $IniCfgFile$ = "%ScriptPath%\opsi-" + $ProductId$ + ".ini" + +comment "Show product picture" +ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ + +Message "Uninstalling " + $ProductId$ + " ..." + +if FileExists("%ScriptPath%\delsub64.ins") + comment "Start uninstall sub section" + Sub "%ScriptPath%\delsub64.ins" +endif + +if $LicenseRequired$ = "true" + comment "Licensing required, free license used" + Sub_free_license +endif + +[Sub_free_license] +comment "License management is enabled and will be used" + +comment "Trying to free license used for the product" +DefVar $result$ +Set $result$ = FreeLicense($LicensePool$) +; If there is an assignment of a license pool to the product, it is possible to use +; Set $result$ = FreeLicense("", $ProductId$) +; +; If there is an assignment of a license pool to a windows software id, it is possible to use +; DefVar $WindowsSoftwareId$ +; $WindowsSoftwareId$ = "..." +; set $result$ = FreeLicense("", "", $WindowsSoftwareId$) + + diff --git a/sample/64bit/installer/nolicense/OPSI/changelog.txt b/sample/64bit/installer/nolicense/OPSI/changelog.txt new file mode 100644 index 0000000..bc69317 --- /dev/null +++ b/sample/64bit/installer/nolicense/OPSI/changelog.txt @@ -0,0 +1,2 @@ +Don't add cahngelog entries here! +It get autogenerated by the opsi-builder.sh \ No newline at end of file diff --git a/sample/64bit/installer/nolicense/OPSI/control b/sample/64bit/installer/nolicense/OPSI/control new file mode 100644 index 0000000..847dbe0 --- /dev/null +++ b/sample/64bit/installer/nolicense/OPSI/control @@ -0,0 +1,30 @@ +[Package] +version: 2 +depends: +incremental: False + +[Product] +type: localboot +id: opsi-template +name: opsi template product +description: A template for opsi products +advice: +version: 4.0.2 +priority: 0 +licenseRequired: False +productClasses: +setupScript: setup64.ins +uninstallScript: uninstall64.ins +updateScript: +alwaysScript: +onceScript: +customScript: +userLoginScript: + +[ProductDependency] +action: setup +requiredProduct: sereby.aio +requiredStatus: installed +requirementType: before + + diff --git a/sample/64bit/installer/nolicense/OPSI/postinst b/sample/64bit/installer/nolicense/OPSI/postinst new file mode 100644 index 0000000..a8e33fc --- /dev/null +++ b/sample/64bit/installer/nolicense/OPSI/postinst @@ -0,0 +1,9 @@ +#! /bin/sh +# +# postinst script for softprod +# This script executes after unpacking files from that archive and registering the product at the server. +# +# The following environment variables can be used to obtain information about the current installation: +# PRODUCT_ID: id of the current product +# CLIENT_DATA_DIR: directory which contains the installed client data +# diff --git a/sample/64bit/installer/nolicense/OPSI/preinst b/sample/64bit/installer/nolicense/OPSI/preinst new file mode 100644 index 0000000..15a5320 --- /dev/null +++ b/sample/64bit/installer/nolicense/OPSI/preinst @@ -0,0 +1,9 @@ +#! /bin/sh +# +# preinst script for softprod +# This script executes before that package will be unpacked from its archive file. +# +# The following environment variables can be used to obtain information about the current installation: +# PRODUCT_ID: id of the current product +# CLIENT_DATA_DIR: directory where client data will be installed +# diff --git a/sample/64bit/installer/nolicense/Testing.txt b/sample/64bit/installer/nolicense/Testing.txt new file mode 100644 index 0000000..d6b5e6c --- /dev/null +++ b/sample/64bit/installer/nolicense/Testing.txt @@ -0,0 +1,28 @@ +*** Qualitiymanagement/Testing procedure + +- Product: + - Name: productname + - Version: xxx + - Release: yyyy + +- Environment + - OS: Native windows XP-32Bit installation + - Preinstalled packages: None (also no aio) + - Files used while testing: + File1: http://domain.de/file.ext + +- Testing process: + OPSI-action: + - Installation (without dependencies like AIO/Firefox): ?? + Result: + - File extensions related to program: ?? + - Start menu entry: ?? + - Starting/using program: viewer works, File1 is shown correctly: ?? + + OPSI-action: + - Uninstall + Result: + - File extensions related to program: unrelated: ?? + - Start menu entry: none: ?? + + diff --git a/sample/64bit/installer/nolicense/builder-product.cfg b/sample/64bit/installer/nolicense/builder-product.cfg new file mode 100644 index 0000000..c8f35f6 --- /dev/null +++ b/sample/64bit/installer/nolicense/builder-product.cfg @@ -0,0 +1,150 @@ +############################ +# Setup product information +############################ +VENDOR="itwatch.de" +PN="itwatch" +NAME="7-Zip" +DESCRIPTION="7-Zip is a file archiver with a high compression ratio." +VERSION="4.10.19" +RELEASE="3" +PRIORITY="0" +ADVICE="" + +# TYPE - defines, if the install files are public or restricted. +# Valid value: restricted | public +TYPE="public" + +################# +# Downloader (DL) object array +################ +# +# To build the opsi-packet, some files are needed. The files are defined by a file object. +# A file object contains different attributes. All attributes (FILE, SOURCE, ..) are binded together +# using a file index. +# +# Target "prepare" : Working directory INST_DIR and OUTPUT_DIR are prepared +# Target "retrieve" : the files are downloaded to the the caching storage ${DIST_CACHE_DIR}/$DL_ARCH[i]/$DL_FILE[i] +# Target "create" : the files are extrated/copied to ${INST_DIR}/CLIENT_DATA/${DL_ARCH[$i]} +# Target "package" : opsi-makeproductfile is called processing ${INST_DIR} directory +# +# - Filename +# Filename used inside the builder and opsi package +# Mandatory parameter. +# DL_FILE[index]="cool-stuff.exe" +# +# - Source URL +# The source URL to download the file from. Multiple URLs are separted by a ";" or "," +# The $DIST_PRIVATE_REPOS variable will be added as the first URL automatically +# Therefore, you download the non-public programs to your local/privagte repository. +# You can use variable like $PN or $Version inside the URLs +# DL_SOURCE[index]="http://cool-stuff.de/download/cool-stuff_1.001.exe;http://mirro5.cool-stuff.at/$PN_$VERSION.exe" +# +# - Architecture +# Definition of the architecture to separate different files. This will be used in +# the file structure inside the opsi-package. Also, you can use it in your repos-URL's +# or filenames (OPSI_REPOS_FILE_PATTERN, OPSI_REPOS_PRODUCT_DIR) to structure the repos. +# If it's a file for all architecture, the variable have not to be set. +# Optional parameter. Default value: +# Valid values: , "X86", "X86_64" +# DL_ARCH[index]="X86" +# +# - WINST variable: +# You can access the file (included in the opsi-package) using WINST script language. +# The target "package" will replace all occurence of the string "@@BUILDER_VARIABLES@@" +# by pairs of "DefVar/Set"-commands, if the WINST attribute is set. Default value: +# Optional parameter. Default value: , +# DL_WINST_NAME[index]=itWESS +# +# - Compression format +# If the retrieved file is compressed, the compression format is specified to +# extract it. If the parameter is not set, no extraction happens +# Optional parameter. Valid values: unzip, 7zip. Default value: . +# DL_EXTRACT_FORMAT="zip" +# +# - Extraction directory for compressed files +# This Variable only works in combination with INSTALL and forces the extraction +# to be done into the specified directory. +# This will result in the files to be extracted to ${OUTPUT_DIR}/${DL_ARCH}/${DL_EXTRACT_TO}. +# This feature is mostly needed if a package includes more setup programms that are nemed the +# same. This way you place the setups into diffent dirs +# Optional parameter. Default value: +# DL_EXTRACT_TO[index]="office" +# +# - Specify Downloader +# Defines the downloader to use to retrieve the SOURCE file +# Optional parameter. Valid values: wget|plowdown. Default value: wget +# + +DL_FILE[0]="itWatchLogo.jpg" +DL_SOURCE[0]="http://www.itwatch.de/logos/itWatchLogo.jpg" + +DL_FILE[1]="itWESS-Client_German.msi" +DL_SOURCE[1]="http://repos.dtnet.de/itwatch/itwatch/4.10.19/itWESS-Client_German.msi;http://internal.graz.disconnected-by-peer.at/Orig/itWatch/itWESS/HB/4.10.19/itWESS-Client_German.msi" +DL_ARCH[1]="X86" +DL_WINST_NAME[1]=itWESS + +DL_FILE[2]="itWESS-64bit_German.msi" +DL_SOURCE[2]="http://repos.dtnet.de/itwatch/itwatch/4.10.19/itWESS-64bit_German.msi;http://internal.graz.disconnected-by-peer.at/Orig/itWatch/itWESS/HB/4.10.19/itWESS-64bit_German.msi" +DL_ARCH[2]="X86_64" +DL_WINST_NAME[2]=itWESS64 + +DL_FILE[3]="AiO-Runtimes-x86-v1.7.1.7z" +DL_SOURCE[3]="http://ftp.computerbase.de/dl-758/weJMhoTGCTbFI5mzRnMlAg/1327825564/AiO-Runtimes-x86-v1.7.1.7z" +DL_ARCH[3]="X86" +DL_DOWNLOADER[3]="wget" +DL_EXTRACT_FORMAT[3]="unzip" +DL_EXTRACT_TO[3]="office" + +# File array index for the image showing while installing the program +ICON_DL_INDEX=0 + +######################### +# Setup additional, custom WINST variables +# which will be injected to the *.ins files (replaces token @@BUILDER_VARIABLES@@ ) +# +# The following tokens inside the WINST_VALUE will be replaced dynamically +# +# @DL_EXTRACT_WINST_PATH[]@ : contains the WINST location of the directory, the files from DL_FILE[] was extracted to. +# Sample: +# WINST_VALUE[1]="@DL_EXTRACT_WINST_PATH[]@\\svcpack\\aio-runtimes.exe" +# results in "%ScriptPath%\X86_64\svcpack\aio-runtimes.exe" +# +######################### +WINST_NAME[0]="InstallExe" +WINST_VALUE[0]="@DL_EXTRACT_WINST_PATH[2]@\\svcpack\\aio-runtimes.exe" + +WINST_NAME[1]="MyVar" +WINST_VALUE[1]="My content" + +######################### +# Setup required OPSI_INI variables +# which will be injected to the opsi-PN.ini files +# +# if your package is not msi based then you can remove the msi part from *.ins files and drop this variables compleatly +# !!! These Variables are requred if you remove them in this cfg file you will get error's about not defined Variables !!! +# +######################### +# if the packaga just supports X86 OR X86_64 (setupXX.ins delsubXX.ins uninstallXX.ins) then you have to just specify one MsiId + +OPSI_INI_SECTION[0]="X86" +OPSI_INI_OPTION[0]="MsiId" +OPSI_INI_VALUE[0]="{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}" + +# OR + +OPSI_INI_SECTION[0]="X86_64" +OPSI_INI_OPTION[0]="MsiId" +OPSI_INI_VALUE[0]="{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}" + +# if the package supports X86 AND X86_64 (setup3264.ins delsub3264.ins uninstall3264.ins) then you have to specify 2 MsiId's + +OPSI_INI_SECTION[0]="X86" +OPSI_INI_OPTION[0]="MsiId32" +OPSI_INI_VALUE[0]="{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}" + +# AND + +OPSI_INI_SECTION[1]="X86_64" +OPSI_INI_OPTION[1]="MsiId64" +OPSI_INI_VALUE[1]="{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}" + diff --git a/sample/64bit/installer/nolicense/builder-targets-cb.sh b/sample/64bit/installer/nolicense/builder-targets-cb.sh new file mode 100644 index 0000000..9a3d4a8 --- /dev/null +++ b/sample/64bit/installer/nolicense/builder-targets-cb.sh @@ -0,0 +1,25 @@ +############################################################################## +# This optional file "builder-targets-cb.sh" will be called by builder.sh +# +# The targets will be called from thde opsi-builder using the following +# order: config, prepare, retrieve, create, package, publish, commit, cleanup +# You can overwrite the target functions in builder-targets-cb.sh +# +# You can define callback functions. The functions are called from +# opsi-builder within processing a target +# cb_package_makeproductfile +# +# You can use every variable defined in any configuration file or by +# the defined builder script itself. Also, calling the predefined +# targets builder_ is possible. +# +# Abstract: +# target order: config, prepare, retrieve, create, package, publish, commit, cleanup +# callbacks: +# +############################################################################## + +function cleanup() { + echo "Cleanup" + builder_cleanup +} diff --git a/sample/64bit/msi/license/CLIENT_DATA/delsub64.ins b/sample/64bit/msi/license/CLIENT_DATA/delsub64.ins new file mode 100644 index 0000000..17779d3 --- /dev/null +++ b/sample/64bit/msi/license/CLIENT_DATA/delsub64.ins @@ -0,0 +1,87 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib gmbh +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/en/credits/ + + +Set $IniFile$ = $InstallDir$ + "\opsi-" + $ProductId$ + ".ini" + +Message "Uninstalling " + $ProductId$ + " ..." + +if FileExists($IniFile$) + Set $MsiIdOld$ = GetValueFromInifile($IniFile$,"X86_64","MsiId","{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}") + if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiIdOld$ + "] DisplayName") = "") + comment "Old MSI id " + $MsiIdOld$ + " found in registry, starting msiexec to uninstall old version" + Winbatch_uninstall_msi_old + sub_check_exitcode + endif +endif +if not (GetRegistryStringValue64("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId$ + "] DisplayName") = "") + comment "MSI id " + $MsiId$ + " found in registry, starting msiexec to uninstall" + Winbatch_uninstall_msi + sub_check_exitcode +endif + +comment "Delete files" +Files_uninstall /64Bit + +comment "Cleanup registry" +Registry_uninstall /64Bit + +comment "Delete program shortcuts" +LinkFolder_uninstall + +[Winbatch_uninstall_msi] +msiexec /x $MsiId$ /qb! REBOOT=ReallySuppress + +[Files_uninstall] +; Example for recursively deleting the installation directory: +; +; del -sf "$InstallDir$\" + +[Registry_uninstall] +; Example of deleting a registry key: +; +; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$] + +[LinkFolder_uninstall] +; Example of deleting a folder from AllUsers startmenu: +; +; set_basefolder common_programs +; delete_subfolder $ProductId$ +; +; Example of deleting a shortcut from AllUsers desktop: +; +; set_basefolder common_desktopdirectory +; set_subfolder "" +; delete_element $ProductId$ + +[Sub_check_exitcode] +comment "Test for installation success via exit code" +set $ExitCode$ = getLastExitCode +; informations to exit codes see +; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx +; http://msdn.microsoft.com/en-us/library/aa368542.aspx +if ($ExitCode$ = "0") + comment "Looks good: setup program gives exitcode zero" +else + comment "Setup program gives a exitcode unequal zero: " + $ExitCode$ + if ($ExitCode$ = "1605") + comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed." + comment "Uninstall of a not installed product failed - no problem" + else + if ($ExitCode$ = "1641") + comment "looks good: setup program gives exitcode 1641" + comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success." + else + if ($ExitCode$ = "3010") + comment "looks good: setup program gives exitcode 3010" + comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success." + else + logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$ + isFatalError + endif + endif + endif +endif + diff --git a/sample/64bit/msi/license/CLIENT_DATA/login.ins b/sample/64bit/msi/license/CLIENT_DATA/login.ins new file mode 100644 index 0000000..7b85744 --- /dev/null +++ b/sample/64bit/msi/license/CLIENT_DATA/login.ins @@ -0,0 +1,24 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib gmbh +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/en/credits/ + +[Actions] +Message "Profile Patch for VLC ...." + +comment "Did we run this script before ? - and set version stamp in profile" +if getValue("installationstate", getProductMap) = "installed" + comment "Product is installed" + if not (scriptWasExecutedBefore) + comment "loginscript was not run yet " + Files_profile_copy + Registry_currentuser_set + endif +endif + +[Files_profile_copy] +copy "%Scriptpath%\profiles\*.*" "%CurrentAppdataDir%\ACME" + +[Registry_currentuser_set] +openkey [HKCU\Software\ACME] +set "show_greeting_window" = "no" diff --git a/sample/64bit/msi/license/CLIENT_DATA/opsi-PN.ini b/sample/64bit/msi/license/CLIENT_DATA/opsi-PN.ini new file mode 100644 index 0000000..978f02e --- /dev/null +++ b/sample/64bit/msi/license/CLIENT_DATA/opsi-PN.ini @@ -0,0 +1,11 @@ +[X86] +MsiId={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} +MsiId32={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} + +[X86_64] +MsiId={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} +MsiId64={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} + +[COMMON] +PN=name +VERSION=version diff --git a/sample/64bit/msi/license/CLIENT_DATA/setup64.ins b/sample/64bit/msi/license/CLIENT_DATA/setup64.ins new file mode 100644 index 0000000..418b02e --- /dev/null +++ b/sample/64bit/msi/license/CLIENT_DATA/setup64.ins @@ -0,0 +1,227 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/en/credits/ + +[Actions] +requiredWinstVersion >= "4.11.2.6" + +DefVar $MsiIdOld$ +DefVar $IniFile$ +DefVar $IniCfgFile$ +DefVar $LogDir$ +DefVar $ProductId$ +DefVar $MinimumSpace$ +DefVar $InstallDir$ +DefVar $ExitCode$ +DefVar $LicenseRequired$ +DefVar $LicenseKey$ +DefVar $LicensePool$ + +Set $LogDir$ = "%SystemDrive%\tmp" + +; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh +; and adds the following variables: +; from builder-product.cfg : all variables definded by attribute WINST[index] +; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE +; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL +; auto generated winst-variables +; $IconFile$: path to product picture +; +@@BUILDER_VARIABLES@@ + +; ---------------------------------------------------------------- +; - Please edit the following values - +; ---------------------------------------------------------------- +;$ProductId$ should be the name of the product in opsi +; therefore please: only lower letters, no umlauts, +; no white space use '-' as a seperator +Set $MinimumSpace$ = "1 MB" +; the path were we find the product after the installation +Set $InstallDir$ = "%ProgramFiles64Dir%\" +Set $LicenseRequired$ = "false" +Set $LicensePool$ = "p_" + $ProductId$ +; ---------------------------------------------------------------- + +Set $IniCfgFile$ = "%ScriptPath%\opsi-" + $ProductId$ + ".ini" + +if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$)) + LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$ + isFatalError + ; Stop process and set installation status to failed +else + comment "Show product picture" + ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ + + if FileExists("%ScriptPath%\delsub64.ins") + comment "Start uninstall sub section" + Sub "%ScriptPath%\delsub64.ins" + endif + + Message "Installing " + $ProductId$ + " ..." + + if $LicenseRequired$ = "true" + comment "Licensing required, reserve license and get license key" + Sub_get_licensekey + endif + + comment "Start setup program" + ChangeDirectory "%SCRIPTPATH%" + Winbatch_install + Sub_check_exitcode + + comment "Copy files" + Files_install /64Bit + + comment "Patch Registry" + Registry_install /64Bit + + comment "Create shortcuts" + LinkFolder_install + +endif + +[Winbatch_install] +; Choose one of the following examples as basis for your installation +; You can use $LicenseKey$ var to pass a license key to the installer +; +; === Nullsoft Scriptable Install System ================================================================ +; "%ScriptPath%\Setup.exe" /S +; +; === MSI package ======================================================================================= +; You may use the parameter PIDKEY=$Licensekey$ +; msiexec /i "%ScriptPath%\some.msi" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=1 REBOOT=ReallySuppress +; +; === InstallShield + MSI===================================================================================== +; Attention: The path to the log file should not contain any whitespaces +; "%ScriptPath%\setup.exe" /s /v" /l* $LogDir$\$ProductId$.install_log.txt /qb! ALLUSERS=1 REBOOT=ReallySuppress" +; "%ScriptPath%\setup.exe" /s /v" /qb! ALLUSERS=2 REBOOT=ReallySuppress" +; +; === InstallShield ===================================================================================== +; Create setup.iss answer file by running: setup.exe /r /f1"c:\setup.iss" +; You may use an answer file by the parameter /f1"c:\setup.iss" +; "%ScriptPath%\setup.exe" /s /sms /f2"$LogDir$\$ProductId$.install_log.txt" +; +; === Inno Setup ======================================================================================== +; http://unattended.sourceforge.net/InnoSetup_Switches_ExitCodes.html +; You may create setup answer file by: setup.exe /SAVEINF="filename" +; You may use an answer file by the parameter /LOADINF="filename" +; "%ScriptPath%\setup.exe" /sp- /silent /norestart /nocancel /SUPPRESSMSGBOXES + +[Files_install] +; copy the ini file to the InstallDir +copy "$IniCfgFile$" "$InstallDir$" + +; Example of recursively copying some files into the installation directory: +; +; copy -s "%ScriptPath%\files\*.*" "$InstallDir$" + +[Registry_install] +; Example of setting some values of an registry key: +; +; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$] +; set "name1" = "some string value" +; set "name2" = REG_DWORD:0001 +; set "name3" = REG_BINARY:00 af 99 cd + +[LinkFolder_install] +; Example of deleting a folder from AllUsers startmenu: +; +; set_basefolder common_programs +; delete_subfolder $ProductId$ +; +; Example of creating an shortcut to the installed exe in AllUsers startmenu: +; +; set_basefolder common_programs +; set_subfolder $ProductId$ +; +; set_link +; name: $ProductId$ +; target: +; parameters: +; working_dir: $InstallDir$ +; icon_file: +; icon_index: +; end_link +; +; Example of creating an shortcut to the installed exe on AllUsers desktop: +; +; set_basefolder common_desktopdirectory +; set_subfolder "" +; +; set_link +; name: $ProductId$ +; target: +; parameters: +; working_dir: $InstallDir$ +; icon_file: +; icon_index: 2 +; end_link + +[Sub_get_licensekey] +if opsiLicenseManagementEnabled + comment "License management is enabled and will be used" + + comment "Trying to get a license key" + Set $LicenseKey$ = demandLicenseKey ($LicensePool$) + ; If there is an assignment of exactly one licensepool to the product the following call is possible: + ; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$) + ; + ; If there is an assignment of a license pool to a windows software id, it is possible to use: + ; DefVar $WindowsSoftwareId$ + ; $WindowsSoftwareId$ = "..." + ; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$) + + DefVar $ServiceErrorClass$ + set $ServiceErrorClass$ = getLastServiceErrorClass + comment "Error class: " + $ServiceErrorClass$ + + if $ServiceErrorClass$ = "None" + comment "Everything fine, we got the license key '" + $LicenseKey$ + "'" + else + if $ServiceErrorClass$ = "LicenseConfigurationError" + LogError "Fatal: license configuration must be corrected" + LogError getLastServiceErrorMessage + isFatalError + else + if $ServiceErrorClass$ = "LicenseMissingError" + LogError "Fatal: required license is not supplied" + isFatalError + endif + endif + endif +else + LogError "Fatal: license required, but license management not enabled" + isFatalError +endif + + +[Sub_check_exitcode] +comment "Test for installation success via exit code" +set $ExitCode$ = getLastExitCode +; informations to exit codes see +; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx +; http://msdn.microsoft.com/en-us/library/aa368542.aspx +if ($ExitCode$ = "0") + comment "Looks good: setup program gives exitcode zero" +else + comment "Setup program gives a exitcode unequal zero: " + $ExitCode$ + if ($ExitCode$ = "1605") + comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed." + comment "Uninstall of a not installed product failed - no problem" + else + if ($ExitCode$ = "1641") + comment "looks good: setup program gives exitcode 1641" + comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success." + else + if ($ExitCode$ = "3010") + comment "looks good: setup program gives exitcode 3010" + comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success." + else + logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$ + isFatalError + endif + endif + endif +endif + diff --git a/sample/64bit/msi/license/CLIENT_DATA/uninstall64.ins b/sample/64bit/msi/license/CLIENT_DATA/uninstall64.ins new file mode 100644 index 0000000..5462fb9 --- /dev/null +++ b/sample/64bit/msi/license/CLIENT_DATA/uninstall64.ins @@ -0,0 +1,70 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib gmbh +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/en/credits/ + +[Actions] +requiredWinstVersion >= "4.11.2.6" + +DefVar $MsiIdOld$ +DefVar $IniFile$ +DefVar $IniCfgFile$ +DefVar $LogDir$ +DefVar $ExitCode$ +DefVar $ProductId$ +DefVar $InstallDir$ +DefVar $LicenseRequired$ +DefVar $LicensePool$ + +Set $LogDir$ = "%SystemDrive%\tmp" + +; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh +; and adds the following variables: +; from builder-product.cfg : all variables definded by attribute WINST[index] +; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE +; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL +; auto generated winst-variables +; $IconFile$: path to product picture +; +@@BUILDER_VARIABLES@@ + +; ---------------------------------------------------------------- +; - Please edit the following values - +; ---------------------------------------------------------------- +Set $InstallDir$ = "%ProgramFiles64Dir%\" +Set $LicenseRequired$ = "false" +Set $LicensePool$ = "p_" + $ProductId$ +; ---------------------------------------------------------------- + +Set $IniCfgFile$ = "%ScriptPath%\opsi-" + $ProductId$ + ".ini" + +comment "Show product picture" +ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ + +Message "Uninstalling " + $ProductId$ + " ..." + +if FileExists("%ScriptPath%\delsub64.ins") + comment "Start uninstall sub section" + Sub "%ScriptPath%\delsub64.ins" +endif + +if $LicenseRequired$ = "true" + comment "Licensing required, free license used" + Sub_free_license +endif + +[Sub_free_license] +comment "License management is enabled and will be used" + +comment "Trying to free license used for the product" +DefVar $result$ +Set $result$ = FreeLicense($LicensePool$) +; If there is an assignment of a license pool to the product, it is possible to use +; Set $result$ = FreeLicense("", $ProductId$) +; +; If there is an assignment of a license pool to a windows software id, it is possible to use +; DefVar $WindowsSoftwareId$ +; $WindowsSoftwareId$ = "..." +; set $result$ = FreeLicense("", "", $WindowsSoftwareId$) + + diff --git a/sample/64bit/msi/license/OPSI/changelog.txt b/sample/64bit/msi/license/OPSI/changelog.txt new file mode 100644 index 0000000..bc69317 --- /dev/null +++ b/sample/64bit/msi/license/OPSI/changelog.txt @@ -0,0 +1,2 @@ +Don't add cahngelog entries here! +It get autogenerated by the opsi-builder.sh \ No newline at end of file diff --git a/sample/64bit/msi/license/OPSI/control b/sample/64bit/msi/license/OPSI/control new file mode 100644 index 0000000..f203124 --- /dev/null +++ b/sample/64bit/msi/license/OPSI/control @@ -0,0 +1,30 @@ +[Package] +version: 2 +depends: +incremental: False + +[Product] +type: localboot +id: opsi-template +name: opsi template product +description: A template for opsi products +advice: +version: 4.0.2 +priority: 0 +licenseRequired: True +productClasses: +setupScript: setup64.ins +uninstallScript: uninstall64.ins +updateScript: +alwaysScript: +onceScript: +customScript: +userLoginScript: + +[ProductDependency] +action: setup +requiredProduct: sereby.aio +requiredStatus: installed +requirementType: before + + diff --git a/sample/64bit/msi/license/OPSI/postinst b/sample/64bit/msi/license/OPSI/postinst new file mode 100644 index 0000000..a8e33fc --- /dev/null +++ b/sample/64bit/msi/license/OPSI/postinst @@ -0,0 +1,9 @@ +#! /bin/sh +# +# postinst script for softprod +# This script executes after unpacking files from that archive and registering the product at the server. +# +# The following environment variables can be used to obtain information about the current installation: +# PRODUCT_ID: id of the current product +# CLIENT_DATA_DIR: directory which contains the installed client data +# diff --git a/sample/64bit/msi/license/OPSI/preinst b/sample/64bit/msi/license/OPSI/preinst new file mode 100644 index 0000000..15a5320 --- /dev/null +++ b/sample/64bit/msi/license/OPSI/preinst @@ -0,0 +1,9 @@ +#! /bin/sh +# +# preinst script for softprod +# This script executes before that package will be unpacked from its archive file. +# +# The following environment variables can be used to obtain information about the current installation: +# PRODUCT_ID: id of the current product +# CLIENT_DATA_DIR: directory where client data will be installed +# diff --git a/sample/64bit/msi/license/Testing.txt b/sample/64bit/msi/license/Testing.txt new file mode 100644 index 0000000..d6b5e6c --- /dev/null +++ b/sample/64bit/msi/license/Testing.txt @@ -0,0 +1,28 @@ +*** Qualitiymanagement/Testing procedure + +- Product: + - Name: productname + - Version: xxx + - Release: yyyy + +- Environment + - OS: Native windows XP-32Bit installation + - Preinstalled packages: None (also no aio) + - Files used while testing: + File1: http://domain.de/file.ext + +- Testing process: + OPSI-action: + - Installation (without dependencies like AIO/Firefox): ?? + Result: + - File extensions related to program: ?? + - Start menu entry: ?? + - Starting/using program: viewer works, File1 is shown correctly: ?? + + OPSI-action: + - Uninstall + Result: + - File extensions related to program: unrelated: ?? + - Start menu entry: none: ?? + + diff --git a/sample/64bit/msi/license/builder-product.cfg b/sample/64bit/msi/license/builder-product.cfg new file mode 100644 index 0000000..c8f35f6 --- /dev/null +++ b/sample/64bit/msi/license/builder-product.cfg @@ -0,0 +1,150 @@ +############################ +# Setup product information +############################ +VENDOR="itwatch.de" +PN="itwatch" +NAME="7-Zip" +DESCRIPTION="7-Zip is a file archiver with a high compression ratio." +VERSION="4.10.19" +RELEASE="3" +PRIORITY="0" +ADVICE="" + +# TYPE - defines, if the install files are public or restricted. +# Valid value: restricted | public +TYPE="public" + +################# +# Downloader (DL) object array +################ +# +# To build the opsi-packet, some files are needed. The files are defined by a file object. +# A file object contains different attributes. All attributes (FILE, SOURCE, ..) are binded together +# using a file index. +# +# Target "prepare" : Working directory INST_DIR and OUTPUT_DIR are prepared +# Target "retrieve" : the files are downloaded to the the caching storage ${DIST_CACHE_DIR}/$DL_ARCH[i]/$DL_FILE[i] +# Target "create" : the files are extrated/copied to ${INST_DIR}/CLIENT_DATA/${DL_ARCH[$i]} +# Target "package" : opsi-makeproductfile is called processing ${INST_DIR} directory +# +# - Filename +# Filename used inside the builder and opsi package +# Mandatory parameter. +# DL_FILE[index]="cool-stuff.exe" +# +# - Source URL +# The source URL to download the file from. Multiple URLs are separted by a ";" or "," +# The $DIST_PRIVATE_REPOS variable will be added as the first URL automatically +# Therefore, you download the non-public programs to your local/privagte repository. +# You can use variable like $PN or $Version inside the URLs +# DL_SOURCE[index]="http://cool-stuff.de/download/cool-stuff_1.001.exe;http://mirro5.cool-stuff.at/$PN_$VERSION.exe" +# +# - Architecture +# Definition of the architecture to separate different files. This will be used in +# the file structure inside the opsi-package. Also, you can use it in your repos-URL's +# or filenames (OPSI_REPOS_FILE_PATTERN, OPSI_REPOS_PRODUCT_DIR) to structure the repos. +# If it's a file for all architecture, the variable have not to be set. +# Optional parameter. Default value: +# Valid values: , "X86", "X86_64" +# DL_ARCH[index]="X86" +# +# - WINST variable: +# You can access the file (included in the opsi-package) using WINST script language. +# The target "package" will replace all occurence of the string "@@BUILDER_VARIABLES@@" +# by pairs of "DefVar/Set"-commands, if the WINST attribute is set. Default value: +# Optional parameter. Default value: , +# DL_WINST_NAME[index]=itWESS +# +# - Compression format +# If the retrieved file is compressed, the compression format is specified to +# extract it. If the parameter is not set, no extraction happens +# Optional parameter. Valid values: unzip, 7zip. Default value: . +# DL_EXTRACT_FORMAT="zip" +# +# - Extraction directory for compressed files +# This Variable only works in combination with INSTALL and forces the extraction +# to be done into the specified directory. +# This will result in the files to be extracted to ${OUTPUT_DIR}/${DL_ARCH}/${DL_EXTRACT_TO}. +# This feature is mostly needed if a package includes more setup programms that are nemed the +# same. This way you place the setups into diffent dirs +# Optional parameter. Default value: +# DL_EXTRACT_TO[index]="office" +# +# - Specify Downloader +# Defines the downloader to use to retrieve the SOURCE file +# Optional parameter. Valid values: wget|plowdown. Default value: wget +# + +DL_FILE[0]="itWatchLogo.jpg" +DL_SOURCE[0]="http://www.itwatch.de/logos/itWatchLogo.jpg" + +DL_FILE[1]="itWESS-Client_German.msi" +DL_SOURCE[1]="http://repos.dtnet.de/itwatch/itwatch/4.10.19/itWESS-Client_German.msi;http://internal.graz.disconnected-by-peer.at/Orig/itWatch/itWESS/HB/4.10.19/itWESS-Client_German.msi" +DL_ARCH[1]="X86" +DL_WINST_NAME[1]=itWESS + +DL_FILE[2]="itWESS-64bit_German.msi" +DL_SOURCE[2]="http://repos.dtnet.de/itwatch/itwatch/4.10.19/itWESS-64bit_German.msi;http://internal.graz.disconnected-by-peer.at/Orig/itWatch/itWESS/HB/4.10.19/itWESS-64bit_German.msi" +DL_ARCH[2]="X86_64" +DL_WINST_NAME[2]=itWESS64 + +DL_FILE[3]="AiO-Runtimes-x86-v1.7.1.7z" +DL_SOURCE[3]="http://ftp.computerbase.de/dl-758/weJMhoTGCTbFI5mzRnMlAg/1327825564/AiO-Runtimes-x86-v1.7.1.7z" +DL_ARCH[3]="X86" +DL_DOWNLOADER[3]="wget" +DL_EXTRACT_FORMAT[3]="unzip" +DL_EXTRACT_TO[3]="office" + +# File array index for the image showing while installing the program +ICON_DL_INDEX=0 + +######################### +# Setup additional, custom WINST variables +# which will be injected to the *.ins files (replaces token @@BUILDER_VARIABLES@@ ) +# +# The following tokens inside the WINST_VALUE will be replaced dynamically +# +# @DL_EXTRACT_WINST_PATH[]@ : contains the WINST location of the directory, the files from DL_FILE[] was extracted to. +# Sample: +# WINST_VALUE[1]="@DL_EXTRACT_WINST_PATH[]@\\svcpack\\aio-runtimes.exe" +# results in "%ScriptPath%\X86_64\svcpack\aio-runtimes.exe" +# +######################### +WINST_NAME[0]="InstallExe" +WINST_VALUE[0]="@DL_EXTRACT_WINST_PATH[2]@\\svcpack\\aio-runtimes.exe" + +WINST_NAME[1]="MyVar" +WINST_VALUE[1]="My content" + +######################### +# Setup required OPSI_INI variables +# which will be injected to the opsi-PN.ini files +# +# if your package is not msi based then you can remove the msi part from *.ins files and drop this variables compleatly +# !!! These Variables are requred if you remove them in this cfg file you will get error's about not defined Variables !!! +# +######################### +# if the packaga just supports X86 OR X86_64 (setupXX.ins delsubXX.ins uninstallXX.ins) then you have to just specify one MsiId + +OPSI_INI_SECTION[0]="X86" +OPSI_INI_OPTION[0]="MsiId" +OPSI_INI_VALUE[0]="{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}" + +# OR + +OPSI_INI_SECTION[0]="X86_64" +OPSI_INI_OPTION[0]="MsiId" +OPSI_INI_VALUE[0]="{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}" + +# if the package supports X86 AND X86_64 (setup3264.ins delsub3264.ins uninstall3264.ins) then you have to specify 2 MsiId's + +OPSI_INI_SECTION[0]="X86" +OPSI_INI_OPTION[0]="MsiId32" +OPSI_INI_VALUE[0]="{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}" + +# AND + +OPSI_INI_SECTION[1]="X86_64" +OPSI_INI_OPTION[1]="MsiId64" +OPSI_INI_VALUE[1]="{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}" + diff --git a/sample/64bit/msi/license/builder-targets-cb.sh b/sample/64bit/msi/license/builder-targets-cb.sh new file mode 100644 index 0000000..9a3d4a8 --- /dev/null +++ b/sample/64bit/msi/license/builder-targets-cb.sh @@ -0,0 +1,25 @@ +############################################################################## +# This optional file "builder-targets-cb.sh" will be called by builder.sh +# +# The targets will be called from thde opsi-builder using the following +# order: config, prepare, retrieve, create, package, publish, commit, cleanup +# You can overwrite the target functions in builder-targets-cb.sh +# +# You can define callback functions. The functions are called from +# opsi-builder within processing a target +# cb_package_makeproductfile +# +# You can use every variable defined in any configuration file or by +# the defined builder script itself. Also, calling the predefined +# targets builder_ is possible. +# +# Abstract: +# target order: config, prepare, retrieve, create, package, publish, commit, cleanup +# callbacks: +# +############################################################################## + +function cleanup() { + echo "Cleanup" + builder_cleanup +} diff --git a/sample/64bit/msi/nolicense/CLIENT_DATA/delsub64.ins b/sample/64bit/msi/nolicense/CLIENT_DATA/delsub64.ins new file mode 100644 index 0000000..17779d3 --- /dev/null +++ b/sample/64bit/msi/nolicense/CLIENT_DATA/delsub64.ins @@ -0,0 +1,87 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib gmbh +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/en/credits/ + + +Set $IniFile$ = $InstallDir$ + "\opsi-" + $ProductId$ + ".ini" + +Message "Uninstalling " + $ProductId$ + " ..." + +if FileExists($IniFile$) + Set $MsiIdOld$ = GetValueFromInifile($IniFile$,"X86_64","MsiId","{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}") + if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiIdOld$ + "] DisplayName") = "") + comment "Old MSI id " + $MsiIdOld$ + " found in registry, starting msiexec to uninstall old version" + Winbatch_uninstall_msi_old + sub_check_exitcode + endif +endif +if not (GetRegistryStringValue64("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId$ + "] DisplayName") = "") + comment "MSI id " + $MsiId$ + " found in registry, starting msiexec to uninstall" + Winbatch_uninstall_msi + sub_check_exitcode +endif + +comment "Delete files" +Files_uninstall /64Bit + +comment "Cleanup registry" +Registry_uninstall /64Bit + +comment "Delete program shortcuts" +LinkFolder_uninstall + +[Winbatch_uninstall_msi] +msiexec /x $MsiId$ /qb! REBOOT=ReallySuppress + +[Files_uninstall] +; Example for recursively deleting the installation directory: +; +; del -sf "$InstallDir$\" + +[Registry_uninstall] +; Example of deleting a registry key: +; +; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$] + +[LinkFolder_uninstall] +; Example of deleting a folder from AllUsers startmenu: +; +; set_basefolder common_programs +; delete_subfolder $ProductId$ +; +; Example of deleting a shortcut from AllUsers desktop: +; +; set_basefolder common_desktopdirectory +; set_subfolder "" +; delete_element $ProductId$ + +[Sub_check_exitcode] +comment "Test for installation success via exit code" +set $ExitCode$ = getLastExitCode +; informations to exit codes see +; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx +; http://msdn.microsoft.com/en-us/library/aa368542.aspx +if ($ExitCode$ = "0") + comment "Looks good: setup program gives exitcode zero" +else + comment "Setup program gives a exitcode unequal zero: " + $ExitCode$ + if ($ExitCode$ = "1605") + comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed." + comment "Uninstall of a not installed product failed - no problem" + else + if ($ExitCode$ = "1641") + comment "looks good: setup program gives exitcode 1641" + comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success." + else + if ($ExitCode$ = "3010") + comment "looks good: setup program gives exitcode 3010" + comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success." + else + logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$ + isFatalError + endif + endif + endif +endif + diff --git a/sample/64bit/msi/nolicense/CLIENT_DATA/login.ins b/sample/64bit/msi/nolicense/CLIENT_DATA/login.ins new file mode 100644 index 0000000..7b85744 --- /dev/null +++ b/sample/64bit/msi/nolicense/CLIENT_DATA/login.ins @@ -0,0 +1,24 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib gmbh +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/en/credits/ + +[Actions] +Message "Profile Patch for VLC ...." + +comment "Did we run this script before ? - and set version stamp in profile" +if getValue("installationstate", getProductMap) = "installed" + comment "Product is installed" + if not (scriptWasExecutedBefore) + comment "loginscript was not run yet " + Files_profile_copy + Registry_currentuser_set + endif +endif + +[Files_profile_copy] +copy "%Scriptpath%\profiles\*.*" "%CurrentAppdataDir%\ACME" + +[Registry_currentuser_set] +openkey [HKCU\Software\ACME] +set "show_greeting_window" = "no" diff --git a/sample/64bit/msi/nolicense/CLIENT_DATA/opsi-PN.ini b/sample/64bit/msi/nolicense/CLIENT_DATA/opsi-PN.ini new file mode 100644 index 0000000..978f02e --- /dev/null +++ b/sample/64bit/msi/nolicense/CLIENT_DATA/opsi-PN.ini @@ -0,0 +1,11 @@ +[X86] +MsiId={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} +MsiId32={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} + +[X86_64] +MsiId={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} +MsiId64={XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} + +[COMMON] +PN=name +VERSION=version diff --git a/sample/64bit/msi/nolicense/CLIENT_DATA/setup64.ins b/sample/64bit/msi/nolicense/CLIENT_DATA/setup64.ins new file mode 100644 index 0000000..14391e5 --- /dev/null +++ b/sample/64bit/msi/nolicense/CLIENT_DATA/setup64.ins @@ -0,0 +1,179 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/en/credits/ + +[Actions] +requiredWinstVersion >= "4.11.2.6" + +DefVar $MsiIdOld$ +DefVar $IniFile$ +DefVar $IniCfgFile$ +DefVar $LogDir$ +DefVar $ProductId$ +DefVar $MinimumSpace$ +DefVar $InstallDir$ +DefVar $ExitCode$ + +Set $LogDir$ = "%SystemDrive%\tmp" + +; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh +; and adds the following variables: +; from builder-product.cfg : all variables definded by attribute WINST[index] +; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE +; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL +; auto generated winst-variables +; $IconFile$: path to product picture +; +@@BUILDER_VARIABLES@@ + +; ---------------------------------------------------------------- +; - Please edit the following values - +; ---------------------------------------------------------------- +;$ProductId$ should be the name of the product in opsi +; therefore please: only lower letters, no umlauts, +; no white space use '-' as a seperator +Set $MinimumSpace$ = "1 MB" +; the path were we find the product after the installation +Set $InstallDir$ = "%ProgramFiles64Dir%\" +; ---------------------------------------------------------------- + +Set $IniCfgFile$ = "%ScriptPath%\opsi-" + $ProductId$ + ".ini" + +if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$)) + LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$ + isFatalError + ; Stop process and set installation status to failed +else + comment "Show product picture" + ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ + + if FileExists("%ScriptPath%\delsub64.ins") + comment "Start uninstall sub section" + Sub "%ScriptPath%\delsub64.ins" + endif + + Message "Installing " + $ProductId$ + " ..." + + comment "Start setup program" + ChangeDirectory "%SCRIPTPATH%" + Winbatch_install + Sub_check_exitcode + + comment "Copy files" + Files_install /64Bit + + comment "Patch Registry" + Registry_install /64Bit + + comment "Create shortcuts" + LinkFolder_install + +endif + +[Winbatch_install] +; Choose one of the following examples as basis for your installation +; You can use $LicenseKey$ var to pass a license key to the installer +; +; === Nullsoft Scriptable Install System ================================================================ +; "%ScriptPath%\Setup.exe" /S +; +; === MSI package ======================================================================================= +; You may use the parameter PIDKEY=$Licensekey$ +; msiexec /i "%ScriptPath%\some.msi" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=1 REBOOT=ReallySuppress +; +; === InstallShield + MSI===================================================================================== +; Attention: The path to the log file should not contain any whitespaces +; "%ScriptPath%\setup.exe" /s /v" /l* $LogDir$\$ProductId$.install_log.txt /qb! ALLUSERS=1 REBOOT=ReallySuppress" +; "%ScriptPath%\setup.exe" /s /v" /qb! ALLUSERS=2 REBOOT=ReallySuppress" +; +; === InstallShield ===================================================================================== +; Create setup.iss answer file by running: setup.exe /r /f1"c:\setup.iss" +; You may use an answer file by the parameter /f1"c:\setup.iss" +; "%ScriptPath%\setup.exe" /s /sms /f2"$LogDir$\$ProductId$.install_log.txt" +; +; === Inno Setup ======================================================================================== +; http://unattended.sourceforge.net/InnoSetup_Switches_ExitCodes.html +; You may create setup answer file by: setup.exe /SAVEINF="filename" +; You may use an answer file by the parameter /LOADINF="filename" +; "%ScriptPath%\setup.exe" /sp- /silent /norestart /nocancel /SUPPRESSMSGBOXES + +[Files_install] +; copy the ini file to the InstallDir +copy "$IniCfgFile$" "$InstallDir$" + +; Example of recursively copying some files into the installation directory: +; +; copy -s "%ScriptPath%\files\*.*" "$InstallDir$" + +[Registry_install] +; Example of setting some values of an registry key: +; +; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$] +; set "name1" = "some string value" +; set "name2" = REG_DWORD:0001 +; set "name3" = REG_BINARY:00 af 99 cd + +[LinkFolder_install] +; Example of deleting a folder from AllUsers startmenu: +; +; set_basefolder common_programs +; delete_subfolder $ProductId$ +; +; Example of creating an shortcut to the installed exe in AllUsers startmenu: +; +; set_basefolder common_programs +; set_subfolder $ProductId$ +; +; set_link +; name: $ProductId$ +; target: +; parameters: +; working_dir: $InstallDir$ +; icon_file: +; icon_index: +; end_link +; +; Example of creating an shortcut to the installed exe on AllUsers desktop: +; +; set_basefolder common_desktopdirectory +; set_subfolder "" +; +; set_link +; name: $ProductId$ +; target: +; parameters: +; working_dir: $InstallDir$ +; icon_file: +; icon_index: 2 +; end_link + +[Sub_check_exitcode] +comment "Test for installation success via exit code" +set $ExitCode$ = getLastExitCode +; informations to exit codes see +; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx +; http://msdn.microsoft.com/en-us/library/aa368542.aspx +if ($ExitCode$ = "0") + comment "Looks good: setup program gives exitcode zero" +else + comment "Setup program gives a exitcode unequal zero: " + $ExitCode$ + if ($ExitCode$ = "1605") + comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed." + comment "Uninstall of a not installed product failed - no problem" + else + if ($ExitCode$ = "1641") + comment "looks good: setup program gives exitcode 1641" + comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success." + else + if ($ExitCode$ = "3010") + comment "looks good: setup program gives exitcode 3010" + comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success." + else + logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$ + isFatalError + endif + endif + endif +endif + diff --git a/sample/64bit/msi/nolicense/CLIENT_DATA/uninstall64.ins b/sample/64bit/msi/nolicense/CLIENT_DATA/uninstall64.ins new file mode 100644 index 0000000..1262a6b --- /dev/null +++ b/sample/64bit/msi/nolicense/CLIENT_DATA/uninstall64.ins @@ -0,0 +1,46 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib gmbh +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/en/credits/ + +[Actions] +requiredWinstVersion >= "4.11.2.6" + +DefVar $MsiIdOld$ +DefVar $IniFile$ +DefVar $IniCfgFile$ +DefVar $LogDir$ +DefVar $ExitCode$ +DefVar $ProductId$ +DefVar $InstallDir$ + +Set $LogDir$ = "%SystemDrive%\tmp" + +; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh +; and adds the following variables: +; from builder-product.cfg : all variables definded by attribute WINST[index] +; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE +; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL +; auto generated winst-variables +; $IconFile$: path to product picture +; +@@BUILDER_VARIABLES@@ + +; ---------------------------------------------------------------- +; - Please edit the following values - +; ---------------------------------------------------------------- +Set $InstallDir$ = "%ProgramFiles64Dir%\" +; ---------------------------------------------------------------- + +Set $IniCfgFile$ = "%ScriptPath%\opsi-" + $ProductId$ + ".ini" + +comment "Show product picture" +ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ + +Message "Uninstalling " + $ProductId$ + " ..." + +if FileExists("%ScriptPath%\delsub64.ins") + comment "Start uninstall sub section" + Sub "%ScriptPath%\delsub64.ins" +endif + diff --git a/sample/64bit/msi/nolicense/OPSI/changelog.txt b/sample/64bit/msi/nolicense/OPSI/changelog.txt new file mode 100644 index 0000000..bc69317 --- /dev/null +++ b/sample/64bit/msi/nolicense/OPSI/changelog.txt @@ -0,0 +1,2 @@ +Don't add cahngelog entries here! +It get autogenerated by the opsi-builder.sh \ No newline at end of file diff --git a/sample/64bit/msi/nolicense/OPSI/control b/sample/64bit/msi/nolicense/OPSI/control new file mode 100644 index 0000000..847dbe0 --- /dev/null +++ b/sample/64bit/msi/nolicense/OPSI/control @@ -0,0 +1,30 @@ +[Package] +version: 2 +depends: +incremental: False + +[Product] +type: localboot +id: opsi-template +name: opsi template product +description: A template for opsi products +advice: +version: 4.0.2 +priority: 0 +licenseRequired: False +productClasses: +setupScript: setup64.ins +uninstallScript: uninstall64.ins +updateScript: +alwaysScript: +onceScript: +customScript: +userLoginScript: + +[ProductDependency] +action: setup +requiredProduct: sereby.aio +requiredStatus: installed +requirementType: before + + diff --git a/sample/64bit/msi/nolicense/OPSI/postinst b/sample/64bit/msi/nolicense/OPSI/postinst new file mode 100644 index 0000000..a8e33fc --- /dev/null +++ b/sample/64bit/msi/nolicense/OPSI/postinst @@ -0,0 +1,9 @@ +#! /bin/sh +# +# postinst script for softprod +# This script executes after unpacking files from that archive and registering the product at the server. +# +# The following environment variables can be used to obtain information about the current installation: +# PRODUCT_ID: id of the current product +# CLIENT_DATA_DIR: directory which contains the installed client data +# diff --git a/sample/64bit/msi/nolicense/OPSI/preinst b/sample/64bit/msi/nolicense/OPSI/preinst new file mode 100644 index 0000000..15a5320 --- /dev/null +++ b/sample/64bit/msi/nolicense/OPSI/preinst @@ -0,0 +1,9 @@ +#! /bin/sh +# +# preinst script for softprod +# This script executes before that package will be unpacked from its archive file. +# +# The following environment variables can be used to obtain information about the current installation: +# PRODUCT_ID: id of the current product +# CLIENT_DATA_DIR: directory where client data will be installed +# diff --git a/sample/64bit/msi/nolicense/Testing.txt b/sample/64bit/msi/nolicense/Testing.txt new file mode 100644 index 0000000..d6b5e6c --- /dev/null +++ b/sample/64bit/msi/nolicense/Testing.txt @@ -0,0 +1,28 @@ +*** Qualitiymanagement/Testing procedure + +- Product: + - Name: productname + - Version: xxx + - Release: yyyy + +- Environment + - OS: Native windows XP-32Bit installation + - Preinstalled packages: None (also no aio) + - Files used while testing: + File1: http://domain.de/file.ext + +- Testing process: + OPSI-action: + - Installation (without dependencies like AIO/Firefox): ?? + Result: + - File extensions related to program: ?? + - Start menu entry: ?? + - Starting/using program: viewer works, File1 is shown correctly: ?? + + OPSI-action: + - Uninstall + Result: + - File extensions related to program: unrelated: ?? + - Start menu entry: none: ?? + + diff --git a/sample/64bit/msi/nolicense/builder-product.cfg b/sample/64bit/msi/nolicense/builder-product.cfg new file mode 100644 index 0000000..c8f35f6 --- /dev/null +++ b/sample/64bit/msi/nolicense/builder-product.cfg @@ -0,0 +1,150 @@ +############################ +# Setup product information +############################ +VENDOR="itwatch.de" +PN="itwatch" +NAME="7-Zip" +DESCRIPTION="7-Zip is a file archiver with a high compression ratio." +VERSION="4.10.19" +RELEASE="3" +PRIORITY="0" +ADVICE="" + +# TYPE - defines, if the install files are public or restricted. +# Valid value: restricted | public +TYPE="public" + +################# +# Downloader (DL) object array +################ +# +# To build the opsi-packet, some files are needed. The files are defined by a file object. +# A file object contains different attributes. All attributes (FILE, SOURCE, ..) are binded together +# using a file index. +# +# Target "prepare" : Working directory INST_DIR and OUTPUT_DIR are prepared +# Target "retrieve" : the files are downloaded to the the caching storage ${DIST_CACHE_DIR}/$DL_ARCH[i]/$DL_FILE[i] +# Target "create" : the files are extrated/copied to ${INST_DIR}/CLIENT_DATA/${DL_ARCH[$i]} +# Target "package" : opsi-makeproductfile is called processing ${INST_DIR} directory +# +# - Filename +# Filename used inside the builder and opsi package +# Mandatory parameter. +# DL_FILE[index]="cool-stuff.exe" +# +# - Source URL +# The source URL to download the file from. Multiple URLs are separted by a ";" or "," +# The $DIST_PRIVATE_REPOS variable will be added as the first URL automatically +# Therefore, you download the non-public programs to your local/privagte repository. +# You can use variable like $PN or $Version inside the URLs +# DL_SOURCE[index]="http://cool-stuff.de/download/cool-stuff_1.001.exe;http://mirro5.cool-stuff.at/$PN_$VERSION.exe" +# +# - Architecture +# Definition of the architecture to separate different files. This will be used in +# the file structure inside the opsi-package. Also, you can use it in your repos-URL's +# or filenames (OPSI_REPOS_FILE_PATTERN, OPSI_REPOS_PRODUCT_DIR) to structure the repos. +# If it's a file for all architecture, the variable have not to be set. +# Optional parameter. Default value: +# Valid values: , "X86", "X86_64" +# DL_ARCH[index]="X86" +# +# - WINST variable: +# You can access the file (included in the opsi-package) using WINST script language. +# The target "package" will replace all occurence of the string "@@BUILDER_VARIABLES@@" +# by pairs of "DefVar/Set"-commands, if the WINST attribute is set. Default value: +# Optional parameter. Default value: , +# DL_WINST_NAME[index]=itWESS +# +# - Compression format +# If the retrieved file is compressed, the compression format is specified to +# extract it. If the parameter is not set, no extraction happens +# Optional parameter. Valid values: unzip, 7zip. Default value: . +# DL_EXTRACT_FORMAT="zip" +# +# - Extraction directory for compressed files +# This Variable only works in combination with INSTALL and forces the extraction +# to be done into the specified directory. +# This will result in the files to be extracted to ${OUTPUT_DIR}/${DL_ARCH}/${DL_EXTRACT_TO}. +# This feature is mostly needed if a package includes more setup programms that are nemed the +# same. This way you place the setups into diffent dirs +# Optional parameter. Default value: +# DL_EXTRACT_TO[index]="office" +# +# - Specify Downloader +# Defines the downloader to use to retrieve the SOURCE file +# Optional parameter. Valid values: wget|plowdown. Default value: wget +# + +DL_FILE[0]="itWatchLogo.jpg" +DL_SOURCE[0]="http://www.itwatch.de/logos/itWatchLogo.jpg" + +DL_FILE[1]="itWESS-Client_German.msi" +DL_SOURCE[1]="http://repos.dtnet.de/itwatch/itwatch/4.10.19/itWESS-Client_German.msi;http://internal.graz.disconnected-by-peer.at/Orig/itWatch/itWESS/HB/4.10.19/itWESS-Client_German.msi" +DL_ARCH[1]="X86" +DL_WINST_NAME[1]=itWESS + +DL_FILE[2]="itWESS-64bit_German.msi" +DL_SOURCE[2]="http://repos.dtnet.de/itwatch/itwatch/4.10.19/itWESS-64bit_German.msi;http://internal.graz.disconnected-by-peer.at/Orig/itWatch/itWESS/HB/4.10.19/itWESS-64bit_German.msi" +DL_ARCH[2]="X86_64" +DL_WINST_NAME[2]=itWESS64 + +DL_FILE[3]="AiO-Runtimes-x86-v1.7.1.7z" +DL_SOURCE[3]="http://ftp.computerbase.de/dl-758/weJMhoTGCTbFI5mzRnMlAg/1327825564/AiO-Runtimes-x86-v1.7.1.7z" +DL_ARCH[3]="X86" +DL_DOWNLOADER[3]="wget" +DL_EXTRACT_FORMAT[3]="unzip" +DL_EXTRACT_TO[3]="office" + +# File array index for the image showing while installing the program +ICON_DL_INDEX=0 + +######################### +# Setup additional, custom WINST variables +# which will be injected to the *.ins files (replaces token @@BUILDER_VARIABLES@@ ) +# +# The following tokens inside the WINST_VALUE will be replaced dynamically +# +# @DL_EXTRACT_WINST_PATH[]@ : contains the WINST location of the directory, the files from DL_FILE[] was extracted to. +# Sample: +# WINST_VALUE[1]="@DL_EXTRACT_WINST_PATH[]@\\svcpack\\aio-runtimes.exe" +# results in "%ScriptPath%\X86_64\svcpack\aio-runtimes.exe" +# +######################### +WINST_NAME[0]="InstallExe" +WINST_VALUE[0]="@DL_EXTRACT_WINST_PATH[2]@\\svcpack\\aio-runtimes.exe" + +WINST_NAME[1]="MyVar" +WINST_VALUE[1]="My content" + +######################### +# Setup required OPSI_INI variables +# which will be injected to the opsi-PN.ini files +# +# if your package is not msi based then you can remove the msi part from *.ins files and drop this variables compleatly +# !!! These Variables are requred if you remove them in this cfg file you will get error's about not defined Variables !!! +# +######################### +# if the packaga just supports X86 OR X86_64 (setupXX.ins delsubXX.ins uninstallXX.ins) then you have to just specify one MsiId + +OPSI_INI_SECTION[0]="X86" +OPSI_INI_OPTION[0]="MsiId" +OPSI_INI_VALUE[0]="{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}" + +# OR + +OPSI_INI_SECTION[0]="X86_64" +OPSI_INI_OPTION[0]="MsiId" +OPSI_INI_VALUE[0]="{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}" + +# if the package supports X86 AND X86_64 (setup3264.ins delsub3264.ins uninstall3264.ins) then you have to specify 2 MsiId's + +OPSI_INI_SECTION[0]="X86" +OPSI_INI_OPTION[0]="MsiId32" +OPSI_INI_VALUE[0]="{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}" + +# AND + +OPSI_INI_SECTION[1]="X86_64" +OPSI_INI_OPTION[1]="MsiId64" +OPSI_INI_VALUE[1]="{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}" + diff --git a/sample/64bit/msi/nolicense/builder-targets-cb.sh b/sample/64bit/msi/nolicense/builder-targets-cb.sh new file mode 100644 index 0000000..9a3d4a8 --- /dev/null +++ b/sample/64bit/msi/nolicense/builder-targets-cb.sh @@ -0,0 +1,25 @@ +############################################################################## +# This optional file "builder-targets-cb.sh" will be called by builder.sh +# +# The targets will be called from thde opsi-builder using the following +# order: config, prepare, retrieve, create, package, publish, commit, cleanup +# You can overwrite the target functions in builder-targets-cb.sh +# +# You can define callback functions. The functions are called from +# opsi-builder within processing a target +# cb_package_makeproductfile +# +# You can use every variable defined in any configuration file or by +# the defined builder script itself. Also, calling the predefined +# targets builder_ is possible. +# +# Abstract: +# target order: config, prepare, retrieve, create, package, publish, commit, cleanup +# callbacks: +# +############################################################################## + +function cleanup() { + echo "Cleanup" + builder_cleanup +}