converted to new build system

CLIENT_DATA/custom/Config.txt

@@ -1 +0,0 @@
-Keep Dir

CLIENT_DATA/delsub32.ins

@@ -4,8 +4,7 @@
 ; credits: http://www.opsi.org/credits/
 
 
-Set $MsiId$ = '{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}'
+Set $UninstallProgram$ = $InstallDir$ + "\uninstall.exe"
-Set $UninstallProgram$ = $InstallDir$ + "\Uninstall.exe"
 
 Message "Uninstalling " + $ProductId$ + " ..."
 
@@ -14,55 +13,12 @@ if FileExists($UninstallProgram$)
 	Winbatch_uninstall
 	sub_check_exitcode
 endif
-if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId$ + "] DisplayName") = "")
-	comment "MSI id " + $MsiId$ + " found in registry, starting msiexec to uninstall"
-	Winbatch_uninstall_msi
-	sub_check_exitcode
-endif
-
-comment "Delete files"
-Files_uninstall /32Bit
-
-comment "Cleanup registry"
-Registry_uninstall /32Bit
-
-comment "Delete program shortcuts"
-LinkFolder_uninstall
 
 [Winbatch_uninstall]
 ; Choose one of the following examples as basis for program uninstall
 ;
 ; === Nullsoft Scriptable Install System ================================================================
-"$UninstallProgram$" /S
+ "$UninstallProgram$" /S
-;
-; === Inno Setup ========================================================================================
-; "$UninstallProgram$" /silent /norestart
-
-
-[Winbatch_uninstall_msi]
-msiexec /x $MsiId$ /qb! REBOOT=ReallySuppress
-
-[Files_uninstall]
-; Example for recursively deleting the installation directory (don't forget the trailing backslash):
-;
-delete -sf "$InstallDir$\"
-
-[Registry_uninstall]
-; Example of deleting a registry key:
-;
-; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
-
-[LinkFolder_uninstall]
-; Example of deleting a folder from AllUsers startmenu:
-;
-; set_basefolder common_programs
-; delete_subfolder $ProductId$
-;
-; Example of deleting a shortcut from AllUsers desktop:
-;
-; set_basefolder common_desktopdirectory
-; set_subfolder ""
-; delete_element $ProductId$
 
 [Sub_check_exitcode]
 comment "Test for installation success via exit code"

CLIENT_DATA/reg_ndiwswan_bind.vbs

@@ -0,0 +1,38 @@
+Main()
+Sub Main()
+ const HKEY_LOCAL_MACHINE = &H80000002 
+ strComputer = "."    
+
+ Set oReg = GetObject("winmgmts:{impersonationLevel=impersonate}!\\" & strComputer & "\root\default:StdRegProv")
+ 
+ strKeyPath = "SYSTEM\CurrentControlSet\Services\Tcpip\Linkage"
+ strValueName = "Bind"          
+ oReg.GetMultiStringValue HKEY_LOCAL_MACHINE, strKeyPath, strValueName, arrValues
+ 
+ Dim colNewVals           
+ Set colNewVals = CreateObject("Scripting.Dictionary")   
+ 
+ flag = false
+ For Each strValue In arrValues
+  If strValue = "\Device\NdisWanIp" Then
+   colNewVals.Add 0, strValue
+   flag = true
+   Exit For
+  End If     
+ Next
+ 
+ If flag = false Then
+  Exit Sub
+ End If
+  
+ i = 1
+ For Each strValue In arrValues
+  If strValue <> "\Device\NdisWanIp" Then
+   colNewVals.Add i, strValue  
+   i = i + 1
+  End If     
+ Next
+ 
+ oReg.SetMultiStringValue HKEY_LOCAL_MACHINE, strKeyPath, strValueName,colNewVals.Items
+ 
+End Sub

CLIENT_DATA/reghack.vbs

@@ -0,0 +1,27 @@
+Const HKEY_LOCAL_MACHINE = &H80000002
+
+strComputer = "."
+ 
+Set oReg=GetObject("winmgmts:{impersonationLevel=impersonate}!\\" & _ 
+    strComputer & "\root\default:StdRegProv")
+ 
+strKeyPath = "SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002bE10318}"
+oReg.EnumKey HKEY_LOCAL_MACHINE, strKeyPath, arrSubKeys
+ 
+strValueName = "DriverDesc"
+For Each subkey In arrSubKeys
+    oReg.GetStringValue HKEY_LOCAL_MACHINE,strKeyPath&"\"&subkey,strValueName,strValue
+    if strValue = "TAP-Win32 Adapter V9" Then
+       strValueName2 = "MTU"
+       		     strValue2 = "1400"
+		     	       oReg.SetStringValue HKEY_LOCAL_MACHINE,strKeyPath&"\"&subkey,strValueName2,strValue2
+			       			   
+							strValueName3 = "NetCfgInstanceId" 
+								      oReg.GetStringValue HKEY_LOCAL_MACHINE,strKeyPath&"\"&subkey,strValueName3,strValue3
+
+								      			  strKeyPath2 = "SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E325-11CE-BFC1-08002bE10318}\"&strValue3&"\Connection"
+											  	      strValueName4 = "Name"
+												      		    strValue3 = "LAN-Verbindung OpenVPN"
+														    	      oReg.SetStringValue HKEY_LOCAL_MACHINE,strKeyPath2,strValueName4,strValue3
+															      end if
+Next

CLIENT_DATA/reghack2.vbs

@@ -0,0 +1,37 @@
+On Error Resume Next 
+  
+Const HKEY_LOCAL_MACHINE = &H80000002
+'Const FULL_DNS_REGISTRATION = True
+'Const DOMAIN_DNS_REGISTRATION = False
+
+strComputer = "."
+
+Set oReg=GetObject("winmgmts:{impersonationLevel=impersonate}!\\" & _ 
+    strComputer & "\root\default:StdRegProv")
+
+strKeyPath = "SYSTEM\CurrentControlSet\Services\Tcpip\Parameters"
+
+strValueName = "SearchList"
+
+Set objWMIService = GetObject("winmgmts:" _ 
+    & "{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2") 
+ 
+Set colNetCards = objWMIService.ExecQuery _ 
+    ("Select * From Win32_NetworkAdapterConfiguration Where IPEnabled = True") 
+ 
+For Each objNetCard in colNetCards 
+    if objNetCard.Description = "TAP-Win32 Adapter V9" then
+       			      objNetCard.SetDynamicDNSRegistration True, _ 
+        		      False
+				objNetCard.SetTcpipNetbios 0
+
+				else
+					objNetCard.SetDynamicDNSRegistration False, _ 
+        				False
+						objNetCard.SetTcpipNetbios 2	
+						end if			   	
+Next 
+	oReg.GetStringValue HKEY_LOCAL_MACHINE,strKeyPath,strValueName,strValue
+			    if strValue <> "" then
+			       		oReg.SetStringValue HKEY_LOCAL_MACHINE,strKeyPath,strValueName,""
+							    end if

CLIENT_DATA/setup32.ins

@@ -6,6 +6,11 @@
 [Actions]
 requiredWinstVersion >= "4.10.8.6"
 
+DefVar $wget$
+DefVar $wget_uninst$
+DefVar $Ovpn-Config-Dir$
+DefVar $Konfig-URL$
+DefVar $pw$
 DefVar $MsiId$
 DefVar $UninstallProgram$
 DefVar $LogDir$
@@ -18,6 +23,23 @@ DefVar $LicenseKey$
 DefVar $LicensePool$
 
 Set $LogDir$ = "%SystemDrive%\tmp"
+;Set $wget$ = "%SystemDrive%\Programme\GnuWin32\bin\wget.exe"
+;Set $wget_uninst$ = GetRegistrystringvalue("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Wget-1.11.4-1_is1] UninstallString")
+;Set $wget_uninst$ = unquote($wget_uninst$,$wget_uninst$)
+
+;Set $Ovpn-Config-Dir$ = "%SystemDrive%\Programme\OpenVPN\config"
+;Set $Konfig-URL$ = GetIni ("%ScriptPath%\url.ini" [Webserver] URL)
+;Set $pw$ = GetProductProperty ("apache-pw","values")
+
+; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh
+; and adds the following variables:
+;   from builder-product.cfg :  all variables definded by attribute WINST[index]
+;   from builder-product.cfg :  VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE   
+;   from opsi-builder.cfg    :  CREATOR_TAG CREATOR_NAME CREATOR_EMAIL           
+;   auto generated winst-variables
+;         $IconFile$: path to product picture
+;
+@@BUILDER_VARIABLES@@
 
 ; ----------------------------------------------------------------
 ; - Please edit the following values                             -
@@ -26,7 +48,7 @@ Set $LogDir$ = "%SystemDrive%\tmp"
 ; therefore please: only lower letters, no umlauts, 
 ; no white space use '-' as a seperator
 Set $ProductId$       = "openvpn"
-Set $MinimumSpace$    = "20 MB"
+Set $MinimumSpace$    = "1 MB"
 ; the path were we find the product after the installation
 Set $InstallDir$      = "%ProgramFiles32Dir%\OpenVPN"
 Set $LicenseRequired$ = "false"
@@ -41,11 +63,6 @@ else
 	comment "Show product picture"
 	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
 		
-	if FileExists("%ScriptPath%\delsub32.ins")
-		comment "Start uninstall sub section"
-		Sub "%ScriptPath%\delsub32.ins"
-	endif
-	
 	Message "Installing " + $ProductId$ + " ..."
 	
 	if $LicenseRequired$ = "true"
@@ -57,14 +74,14 @@ else
 	Winbatch_install
 	Sub_check_exitcode
 	
-	comment "Copy files"
+;        comment "Patch Registry"
-	Files_install /32Bit
+;        Registry_install /32Bit
 
-	comment "Patch Registry"
+;        comment "Default-User in Registry"
-	Registry_install /32Bit
+;        Registry_AllUsers /AllNTUserdats
 
-	comment "Create shortcuts"
+        comment "Shortcuts"
-	LinkFolder_install
+        LinkFolder_install
 
 	comment "Test for installation success"
 	; Test if software marked as installed in registry
@@ -82,121 +99,53 @@ endif
 ; You can use $LicenseKey$ var to pass a license key to the installer
 ;
 ; === Nullsoft Scriptable Install System ================================================================
-"%ScriptPath%\DriverSigning.exe" -OFF
-"%ScriptPath%\X86FILE" /S
-"%ScriptPath%\DriverSigning.exe" -ON
 
-[Files_install]
+
-; Example of recursively copying some files into the installation directory:
+"$Driversigning32Exe$" -OFF
-;
+"$Install32Exe$" /S
-copy -s "%ScriptPath%\custom\*.*" "$InstallDir$\config\"
+"$Driversigning32Exe$" -OFF
+;"$Wget32Exe$" /Silent
+;Set $wget_uninst$ = GetRegistrystringvalue("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Wget-1.11.4-1_is1] UninstallString")
+;Set $wget_uninst$ = unquote($wget_uninst$,$wget_uninst$)
+;"%ScriptPath%\reghack.vbs"
+;"%ScriptPath%\reghack2.vbs"
+;"%ScriptPath%\reg_ndiwswan_bind.vbs"
+
+;$wget$ -O $Ovpn-Config-Dir$\ca.crt --http-user=%PCName% --password=$pw$  $Konfig-URL$/%PCName%/ca.crt
+;$wget$ -O $Ovpn-Config-Dir$\client.crt --http-user=%PCName% --password=$pw$  $Konfig-URL$/%PCName%/client.crt
+;$wget$ -O $Ovpn-Config-Dir$\client.key --http-user=%PCName% --password=$pw$  $Konfig-URL$/%PCName%/client.key
+;$wget$ -O $Ovpn-Config-Dir$\client.ovpn --http-user=%PCName% --password=$pw$  $Konfig-URL$/%PCName%/client.ovpn
+;$wget$ -O $Ovpn-Config-Dir$\ta.key --http-user=%PCName% --password=$pw$  $Konfig-URL$/%PCName%/ta.key
+
+;cacls $Ovpn-Config-Dir$ /E /R Benutzer
+;cacls $Ovpn-Config-Dir$ /E /R Hauptbenutzer
+
+;sc config OpenVPNService start= auto
+;netsh firewall set opmode mode=disable interface="LAN-Verbindung OpenVPN"
+
+;$wget_uninst$ /silent
 
 [Registry_install]
-; Example of setting some values of an registry key:
+;openkey [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server]
-;
+;set "fDenyTSConnections" = REG_DWORD:0000
-; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
+
-; set "name1" = "some string value"
+;openkey [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa\Kerberos\Parameters]
-; set "name2" = REG_DWORD:0001
+;set "MaxPacketSize"=reg_dword:01
-; set "name3" = REG_BINARY:00 af 99 cd
+
+;openkey [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
+;set "GpNetworkStartTimeoutPolicyValue"=reg_dword:60
+;set "GroupPolicyMinTransferRate"=reg_dword:00
+
+;openkey [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\System]
+;set "GpNetworkStartTimeoutPolicyValue"=reg_dword:60
+;set "GroupPolicyMinTransferRate"=reg_dword:00
+
+[Registry_AllUsers]
+;openkey [SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
+;set "GpNetworkStartTimeoutPolicyValue"=reg_dword:60
+;set "GroupPolicyMinTransferRate"=reg_dword:00
 
 [LinkFolder_install]
-; Example of deleting a folder from AllUsers startmenu:
+set_basefolder common_desktopdirectory
-;
+set_subfolder ""
-; set_basefolder common_programs
+delete_element "OpenVPN GUI"
-; delete_subfolder $ProductId$
-;
-; Example of creating an shortcut to the installed exe in AllUsers startmenu:
-;
-; set_basefolder common_programs
-; set_subfolder $ProductId$
-;
-; set_link
-; 	name: $ProductId$
-; 	target: <path to the program>
-; 	parameters:
-; 	working_dir: $InstallDir$
-; 	icon_file:
-; 	icon_index:
-; end_link
-;
-; Example of creating an shortcut to the installed exe on AllUsers desktop:
-;
-; set_basefolder common_desktopdirectory
-; set_subfolder ""
-;
-; set_link
-; 	name: $ProductId$
-; 	target: <path to the program>
-; 	parameters: <some_param>
-; 	working_dir: $InstallDir$
-; 	icon_file: <path to icon file>
-; 	icon_index: 2
-; end_link
-
-[Sub_get_licensekey]
-if opsiLicenseManagementEnabled
-	comment "License management is enabled and will be used"
-
-	comment "Trying to get a license key"
-	Set $LicenseKey$ = demandLicenseKey ($LicensePool$)
-	; If there is an assignment of exactly one licensepool to the product the following call is possible:
-	; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$)
-	;
-	; If there is an assignment of a license pool to a windows software id, it is possible to use:
-	; DefVar $WindowsSoftwareId$
-	; $WindowsSoftwareId$ = "..."
-	; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$)
-	
-	DefVar $ServiceErrorClass$
-	set $ServiceErrorClass$ = getLastServiceErrorClass
-	comment "Error class: " + $ServiceErrorClass$
-	
-	if $ServiceErrorClass$ = "None"
-		comment "Everything fine, we got the license key '" + $LicenseKey$ + "'"
-	else
-		if $ServiceErrorClass$ = "LicenseConfigurationError"
-			LogError "Fatal: license configuration must be corrected"
-			LogError getLastServiceErrorMessage
-			isFatalError
-		else 
-			if $ServiceErrorClass$ = "LicenseMissingError"
-				LogError "Fatal: required license is not supplied"
-				isFatalError
-			endif
-		endif
-	endif
-else
-	LogError "Fatal: license required, but license management not enabled"
-	isFatalError
-endif
-
-
-[Sub_check_exitcode]
-comment "Test for installation success via exit code"
-set $ExitCode$ = getLastExitCode
-; informations to exit codes see
-; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
-; http://msdn.microsoft.com/en-us/library/aa368542.aspx
-if ($ExitCode$ = "0")
-	comment "Looks good: setup program gives exitcode zero"
-else
-	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
-	if ($ExitCode$ = "1605")
-		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
-		comment "Uninstall of a not installed product failed - no problem"
-	else
-		if ($ExitCode$ = "1641")
-			comment "looks good: setup program gives exitcode 1641"
-			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
-		else
-			if ($ExitCode$ = "3010")
-				comment "looks good: setup program gives exitcode 3010"
-				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
-			else
-				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
-				isFatalError
-			endif
-		endif
-	endif
-endif
-

CLIENT_DATA/uninstall32.ins

@@ -17,10 +17,20 @@ DefVar $LicensePool$
 
 Set $LogDir$ = "%SystemDrive%\tmp"
 
+; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh
+; and adds the following variables:
+;   from builder-product.cfg :  all variables definded by attribute WINST[index]
+;   from builder-product.cfg :  VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE   
+;   from opsi-builder.cfg    :  CREATOR_TAG CREATOR_NAME CREATOR_EMAIL           
+;   auto generated winst-variables
+;         $IconFile$: path to product picture
+;
+@@BUILDER_VARIABLES@@
+
 ; ----------------------------------------------------------------
 ; - Please edit the following values                             -
 ; ----------------------------------------------------------------
-Set $ProductId$       = "openvpn"
+Set $ProductId$       = "opsi-template"
 Set $InstallDir$      = "%ProgramFiles32Dir%\OpenVPN"
 Set $LicenseRequired$ = "false"
 Set $LicensePool$     = "p_" + $ProductId$
@@ -43,23 +53,16 @@ if $LicenseRequired$ = "true"
 endif
 
 [Sub_free_license]
-if opsiLicenseManagementEnabled
+comment "License management is enabled and will be used"
-	comment "License management is enabled and will be used"
-
-	comment "Trying to free license used for the product"
-	DefVar $result$
-	Set $result$ = FreeLicense($LicensePool$)
-	; If there is an assignment of a license pool to the product, it is possible to use
-	; Set $result$ = FreeLicense("", $ProductId$)
-	;
-	; If there is an assignment of a license pool to a windows software id, it is possible to use
-	; DefVar $WindowsSoftwareId$
-	; $WindowsSoftwareId$ = "..."
-	; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)
-else
-	LogError "Error: licensing required, but license management not enabled"
-	isFatalError
-endif
-
 
+comment "Trying to free license used for the product"
+DefVar $result$
+Set $result$ = FreeLicense($LicensePool$)
+; If there is an assignment of a license pool to the product, it is possible to use
+; Set $result$ = FreeLicense("", $ProductId$)
+;
+; If there is an assignment of a license pool to a windows software id, it is possible to use
+; DefVar $WindowsSoftwareId$
+; $WindowsSoftwareId$ = "..."
+; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)
 

CLIENT_DATA/url.ini

@@ -0,0 +1,2 @@
+[Webserver]
+URL = "http://opsi-dev.dtnet.de/opsi/openvpn"

DriverSigning.exe.sha1sum

@@ -1 +0,0 @@
-1bb3179fe21d47071f6b1532419876b5d9f07444  /usr/portage/distfiles/DriverSigning.exe

Driversigning.exe.sha1sum

@@ -0,0 +1 @@
+1bb3179fe21d47071f6b1532419876b5d9f07444  /home/dtrinks/.opsi-dist-cache/openvpn.org/openvpn/2.2.2/X86/Driversigning.exe

OPSI/changelog.txt

@@ -0,0 +1,2 @@
+Don't add cahngelog entries here!
+It get autogenerated by the opsi-builder.sh

OPSI/control

@@ -6,8 +6,8 @@ incremental: False
 [Product]
 type: localboot
 id: openvpn
-name: OpenVPN
+name: Openvpn
-description: OpenVPN ist ein Programm zum Aufbau eines Virtuellen Privaten Netzwerkes (VPN) über eine verschlüsselte TLS-Verbindung.
+description: Openvpn Client
 advice: ADVICE
 version: VERSION
 priority: PRIORITY
@@ -30,8 +30,11 @@ description: which architecture (32/64 bit) has to be installed
 values: ["32 only", "64 only", "both", "system specific"]
 default: ["system specific"]
 
-[ProductDependency]
+;[ProductProperty]
-action: setup
+;type: unicode
-requiredProduct: aio
+;name: apache-pw
-requiredStatus: installed
+;multivalue: False
-requirementType: before
+;editable: True
+;description: Passwort fuer Download der Konfigfiles
+;values: ["Passwort"]
+;default: ["Passwort"]

Testing.txt

@@ -0,0 +1,28 @@
+*** Qualitiymanagement/Testing procedure
+
+- Product:
+        - Name: productname
+        - Version: xxx
+        - Release: yyyy
+
+- Environment
+        - OS: Native windows XP-32Bit installation
+	- Preinstalled packages: None (also no aio)
+	- Files used while testing:
+                File1: http://domain.de/file.ext
+
+- Testing process:
+        OPSI-action:
+                - Installation (without dependencies like AIO/Firefox): ??
+        Result:   
+                - File extensions related to program: ??
+                - Start menu entry: ??
+                - Starting/using program: viewer works, File1 is shown correctly: ??
+
+        OPSI-action:
+                - Uninstall
+        Result:
+                - File extensions related to program: unrelated: ??
+                - Start menu entry: none: ??
+
+

build.sh

@@ -1,147 +0,0 @@
-#!/bin/sh
-PN="openvpn"
-VERSION="2.2.2"
-RELEASE="2"
-PRIORITY="0"
-ADVICE=""
-TYPE="testing"
-# all downloads should not have any traling parameters like ?downlaodid=1234 .....(should rewrite in python)
-ICON="http://www.bitblokes.de/wp-content/uploads/2010/10/openvpn-logo-150x150.png"
-X86="http://swupdate.openvpn.org/community/releases/openvpn-2.2.2-install.exe"
-X86_1="http://nativeex.boot-land.net/Programs/DriverSigning/DriverSigning.exe"
-#AMD64="http://downloads.sourceforge.net/sevenzip/7z920-x64.msi"
-ICONFILE=${ICON##*/}
-X86FILE=${X86##*/}
-X86FILE_1=${X86_1##*/}
-#AMD64FILE=${AMD64##*/}
-
-	if [ -e /var/tmp/opsi/upload/$TYPE/${PN}_${VERSION}-${RELEASE}.opsi ]
-	then
-		echo "package ${PN}_${VERSION}-${RELEASE}.opsi already generated"
-		exit 1
-	fi
-
-OUT=$(mktemp -d /tmp/output.XXXXXXXXXX) || { echo "Failed to create temp dir"; exit 1; }
-mkdir $OUT/$PN
-cp -Rv OPSI CLIENT_DATA $OUT/$PN
-unix2dos $OUT/$PN/CLIENT_DATA/*
-
-	if [ -e /usr/portage/distfiles/$ICONFILE ]
-	then
-		if [ -e $ICONFILE.sha1sum ]
-		then
-			SHA1SUM=`cat $ICONFILE.sha1sum`
-			CHECKSUM=`sha1sum /usr/portage/distfiles/$ICONFILE`
-			if [ "$CHECKSUM" = "$SHA1SUM" ]
-			then
-				convert -colorspace rgb /usr/portage/distfiles/$ICONFILE -transparent white -background transparent -resize 160x160\> \
-					-size 160x160 xc:transparent +swap -gravity center -composite $OUT/$PN/CLIENT_DATA/$PN.png
-			else
-				echo "The checksums do not match."
-				exit 1
-			fi
-		else
-			echo "You need to create the checksums with: sha1sum /usr/portage/distfiles/$ICONFILE > $ICONFILE.sha1sum"
-			exit 1
-		fi
-	else
-		echo "Downloading file"
-		wget -P /usr/portage/distfiles/ $ICON
-		exit 1
-	fi
-
-	if [ -e /usr/portage/distfiles/$X86FILE ]
-	then
-		if [ -e $X86FILE.sha1sum ]
-		then
-			SHA1SUM=`cat $X86FILE.sha1sum`
-			CHECKSUM=`sha1sum /usr/portage/distfiles/$X86FILE`
-			if [ "$CHECKSUM" = "$SHA1SUM" ]
-			then
-				cp /usr/portage/distfiles/$X86FILE $OUT/$PN/CLIENT_DATA
-			else
-				echo "The checksums do not match."
-				exit 1
-			fi
-		else
-			echo "You need to create the checksums with: sha1sum /usr/portage/distfiles/$X86FILE > $X86FILE.sha1sum"
-			exit 1
-		fi
-	else
-		echo "Downloading file"
-		wget -O /usr/portage/distfiles/$X86FILE $X86
-		exit 1
-	fi
-
-	if [ -e /usr/portage/distfiles/$X86FILE_1 ]
-	then
-		if [ -e $X86FILE_1.sha1sum ]
-		then
-			SHA1SUM=`cat $X86FILE_1.sha1sum`
-			CHECKSUM=`sha1sum /usr/portage/distfiles/$X86FILE_1`
-			if [ "$CHECKSUM" = "$SHA1SUM" ]
-			then
-				cp /usr/portage/distfiles/$X86FILE_1 $OUT/$PN/CLIENT_DATA
-				#7z e -o$OUT/$PN/CLIENT_DATA /usr/portage/distfiles/$X86FILE_1
-			else
-				echo "The checksums do not match."
-				exit 1
-			fi
-		else
-			echo "You need to create the checksums with: sha1sum /usr/portage/distfiles/$X86FILE_1 > $X86FILE_1.sha1sum"
-			exit 1
-		fi
-	else
-		echo "Downloading file"
-		wget -O /usr/portage/distfiles/$X86FILE_1 $X86_1
-		exit 1
-	fi
-
-#	if [ -e /usr/portage/distfiles/$AMD64FILE ]
-#	then
-#		if [ -e $AMD64FILE.sha1sum ]
-#		then
-#			SHA1SUM=`cat $AMD64FILE.sha1sum`
-#			CHECKSUM=`sha1sum /usr/portage/distfiles/$AMD64FILE`
-#			if [ "$CHECKSUM" = "$SHA1SUM" ]
-#			then
-#				cp /usr/portage/distfiles/$AMD64FILE $OUT/$PN/CLIENT_DATA
-#			else
-#				echo "The checksums do not match." 
-#				exit 1
-#			fi
-#		else
-#			echo "You need to create the checksums with: sha1sum /usr/portage/distfiles/$AMD64FILE > $AMD64FILE.sha1sum"
-#			exit 1
-#		fi
-#	else
-#		echo "Downloading file"
-#		wget -P /usr/portage/distfiles/ $AMD64
-#		exit 1
-#	fi
-
-sed -e "s!VERSION!$VERSION!g" -e "s!RELEASE!$RELEASE!g" -e "s!PRIORITY!$PRIORITY!g" -e "s!ADVICE!$ADVICE!g" -i $OUT/$PN/OPSI/control
-#sed -e "s!X86FILE!$X86FILE!g" -e "s!AMD64FILE!$AMD64FILE!g" -i $OUT/$PN/CLIENT_DATA/setup.ins
-sed -e "s!X86FILE!$X86FILE!g" -i $OUT/$PN/CLIENT_DATA/setup32.ins
-
-if test -d ".git"; then
-    git log --date-order --date=short | \
-    sed -e '/^commit.*$/d' | \
-    awk '/^Author/ {sub(/\\$/,""); getline t; print $0 t; next}; 1' | \
-    sed -e 's/^Author: //g' | \
-    sed -e 's/>Date:   \([0-9]*-[0-9]*-[0-9]*\)/>\t\1/g' | \
-    sed -e 's/^\(.*\) \(\)\t\(.*\)/\3    \1    \2/g' > $OUT/$PN/OPSI/changelog.txt
-else
-    echo "No git repository present."
-    exit 1
-fi
-
-pushd $OUT
-opsi-makeproductfile -v $OUT/$PN
-popd
-
-mkdir -p /var/tmp/opsi/upload/$TYPE/
-cp -afv $OUT/*.opsi /var/tmp/opsi/upload/$TYPE/
-
-#rm -rf $OUT
-

builder-product.cfg

@@ -0,0 +1,34 @@
+############################
+# Setup product information 
+############################
+VENDOR="openvpn.org"
+PN="openvpn"
+VERSION="2.2.2"
+RELEASE="1"
+PRIORITY="0"
+ADVICE=""
+
+# TYPE - defines, if the install files are public or restricted. 
+# Valid value: restricted | public
+TYPE="public"
+  
+DL_FILE[0]="openvpn.png"
+DL_SOURCE[0]="http://www.bitblokes.de/wp-content/uploads/2010/10/openvpn-logo-150x150.png"
+
+DL_FILE[1]="openvpn32.exe"
+DL_SOURCE[1]="http://swupdate.openvpn.org/community/releases/openvpn-2.2.2-install.exe"
+DL_ARCH[1]="X86"
+DL_WINST_NAME[1]=Install32Exe
+
+DL_FILE[2]="Driversigning.exe"
+DL_SOURCE[2]="http://nativeex.boot-land.net/Programs/DriverSigning/DriverSigning.exe"
+DL_ARCH[2]="X86"
+DL_WINST_NAME[2]=Driversigning32Exe
+
+;DL_FILE[3]="wget.exe"
+;DL_SOURCE[3]="http://downloads.sourceforge.net/project/gnuwin32/wget/1.11.4-1/wget-1.11.4-1-setup.exe?r=&ts=1333400082&use_mirror=garr"
+;DL_ARCH[3]="X86"
+;DL_WINST_NAME[3]=Wget32exe
+
+# File array index for the image showing while installing the program
+ICON_DL_INDEX=0

builder-targets-cb.sh

@@ -0,0 +1,25 @@
+##############################################################################
+# This optional file "builder-targets-cb.sh" will be called by builder.sh 
+# 
+# The targets will be called from thde opsi-builder using the following
+# order: config, prepare, retrieve, create, package, publish, commit, cleanup 
+# You can overwrite the target functions in builder-targets-cb.sh
+# 
+# You can define callback functions. The functions are called from
+# opsi-builder within processing a target
+#   cb_package_makeproductfile
+#
+# You can use every variable defined in any configuration file or by
+# the defined builder script itself. Also, calling the predefined
+# targets builder_<targetname> is possible.
+#
+# Abstract:
+#  target order: config, prepare, retrieve, create, package, publish, commit, cleanup
+#  callbacks: <none>
+#
+##############################################################################
+
+function cleanup() {
+    echo "Cleanup"
+    builder_cleanup
+}

openvpn-2.2.2-install.exe.sha1sum

@@ -1 +0,0 @@
-395a31bfa3e9991d31d0350842e3a8ff710e20a3  /usr/portage/distfiles/openvpn-2.2.2-install.exe

openvpn-logo-150x150.png.sha1sum

@@ -1 +0,0 @@
-1e55e6d56fd54b044fedb5863e1693e812b776fe  /usr/portage/distfiles/openvpn-logo-150x150.png

openvpn.png.sha1sum

@@ -0,0 +1 @@
+1e55e6d56fd54b044fedb5863e1693e812b776fe  /home/dtrinks/.opsi-dist-cache/openvpn.org/openvpn/2.2.2//openvpn.png

openvpn32.exe.sha1sum

@@ -0,0 +1 @@
+395a31bfa3e9991d31d0350842e3a8ff710e20a3  /home/dtrinks/.opsi-dist-cache/openvpn.org/openvpn/2.2.2/X86/openvpn32.exe

wget.exe.sha1sum

@@ -0,0 +1 @@
+35e3ecc99c5a28745f957e87695b5a18b1f61680  /home/dtrinks/.opsi-dist-cache/openvpn.org/openvpn/2.2.2/X86/wget.exe