nyam.imagine/CLIENT_DATA/setup3264.ins
2013-04-01 12:29:56 +02:00

282 lines
9.8 KiB
TeX

; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/en/credits/
[Actions]
requiredWinstVersion >= "4.11.2.6"
DefVar $UninstallProgram32$
DefVar $UninstallProgramOld32$
DefVar $IniFile32$
DefVar $UninstallProgram64$
DefVar $UninstallProgramOld64$
DefVar $IniFile64$
DefVar $IniCfgFile$
DefVar $LogDir$
DefVar $ProductId$
DefVar $MinimumSpace$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $ExitCode$
DefVar $INST_SystemType$
DefVar $INST_architecture$
DefVar $OLD_VERSION$
DefVar $OLD_CREATOR_TAG$
DefVar $OLD_RELEASE$
DefVar $InstallDir$
DefVar $ProgExe$
Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
Set $LogDir$ = "%SystemDrive%\tmp"
; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh
; and adds the following variables:
; from builder-product.cfg : all variables definded by attribute WINST[index]
; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE
; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL
; auto generated winst-variables
; $IconFile$: path to product picture
;
@@BUILDER_VARIABLES@@
; ----------------------------------------------------------------
; - Please edit the following values -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts,
; no white space use '-' as a seperator
Set $MinimumSpace$ = "1 MB"
; the path were we find the product after the installation
Set $InstallDir32$ = "%ProgramFiles32Dir%\Imagine"
Set $InstallDir64$ = "%ProgramFiles64Dir%\Imagine"
; ----------------------------------------------------------------
Set $IniCfgFile$ = "%ScriptPath%\opsi-" + $ProductId$ + ".ini"
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
isFatalError
; Stop process and set installation status to failed
else
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $NAME$
if FileExists("%ScriptPath%\delsub3264.ins")
comment "Start uninstall sub section"
Sub "%ScriptPath%\delsub3264.ins"
endif
comment "installing"
if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
Message "Installing " + $ProductId$ + " "+ $VERSION$ + "-" + $CREATOR_TAG$ + $RELEASE$ + " 32 Bit..."
comment "Start setup program"
ChangeDirectory "%SCRIPTPATH%"
; Winbatch_install_32
; Sub_check_exitcode
comment "Copy files"
Files_install_32 /32Bit
Files_install_config /AllNtUserProfiles
DosInAnIcon_set_config
Set $InstallDir$ = $InstallDir32$
Set $ProgExe$ = $Prog32$
DosInAnIcon_install winst /32bit
comment "Patch Registry"
Registry_install /32Bit
comment "Create shortcuts"
LinkFolder_install_32
endif
if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
Message "Installing " + $ProductId$ + " "+ $VERSION$ + "-" + $CREATOR_TAG$ + $RELEASE$ + " 64 Bit..."
comment "Start setup program"
ChangeDirectory "%SCRIPTPATH%"
; Winbatch_install_64
; Sub_check_exitcode
comment "Copy files"
Files_install_64 /64Bit
Files_install_config /AllNTUserProfiles
DosInAnIcon_set_config
Set $InstallDir$ = $InstallDir64$
Set $ProgExe$ = $Prog64$
DosInAnIcon_install winst /64bit
comment "Patch Registry"
Registry_install /64Bit
comment "Create shortcuts"
LinkFolder_install_64
endif
endif
[DosInAnIcon_install]
rem @echo off
If exist "%System%\defaultassociations.xml" (copy "%System%\defaultassociations.xml" "$LogDir$") ELSE (copy "%ScriptPath%\defaultassociations.xml" "$LogDir$")
SET Prog=$ProgExe$
SET Prog=%Prog:~0,-4%
SET SC=HKLM\Software\Classes
SET Extn=bmp-55 dds-60 gif-65 jpg-70 jpeg-70 pcx-75 png-80 psd-85 tga-90 tif-95 tiff-95
rem SET Extn=3fr-11 arw-11 cr2-11 crw-11 dcr-11 dng-11 erf-11 kdc-11 mos-11 mrw-11 nef-11 orf-11 pef-11 raf-11 raw-11 srw-11 sr-11 ani-11 anm-11 dib-11 rle-11 cdr-11 cdt-11 pat-11 ccx-11 cmx-11 clp-11 cur-11 dcm-11 dicom-11 dcx-11 dds-11 emf-11 exr-11 sxr-11 mxr-11 flc-11 fli-11 hdp-11 jxr-11 wdp-11 hdr-11 icl-11 ico-11 ics-11 jbg-11 jbig-11 jp2-11 jpc-11 j2k-11 jpg-11 jpe-11 jpeg-11 lbm-11 lbmp-11 iff-11 mac-11 macp-11 mbm-11 mng-11 bpm-11 pcd-11 pcx-11 pdn-11 pgm-11 pic-11 cel-11 png-11 ppm-11 psd-11 8psd-11 psp-11 ras-11 rla-11 rle-11 sgi-11 rgb-11 bw-11 spr-11 wbmp-11 wap-11 wbm-11 webp-11 wmf-11 wpg-11 xbm-11 xcf-11 xpm-11 zip-11 cbz-11 7z-11 cb7-11 arj-11 lzh-11 rar-11 cbr-11 alz-11 egg-11 tar-11 gz-11 bz2-11 iso-11 cab-11
FOR %%j IN (%Extn%) DO (
FOR /F "tokens=1,2 delims=-" %%A IN ("%%j") DO (
REG ADD %SC%\.%%A /VE /D "Imagine.%%A" /F
REG ADD %SC%\Imagine.%%A /VE /D "%%A Image" /F
REG ADD %SC%\Imagine.%%A\DefaultIcon /VE /D "$InstallDir$\%Prog%.dll,%%B" /F
REG ADD %SC%\Imagine.%%A\shell\open\command /VE /D "\"$InstallDir$\%Prog%.exe\" \"%%1\"" /F
copy "$LogDir$\defaultassociations.xml" "$LogDir$\defaultassociations.xml.old"
xml ed -d /DefaultAssociations/Association[@Identifier='.%%A'] "$LogDir$\defaultassociations.xml.old"> "$LogDir$\defaultassociations.xml"
copy "$LogDir$\defaultassociations.xml" "$LogDir$\defaultassociations.xml.old"
xml ed -s /DefaultAssociations -t elem -n Association_new -v "" -i /DefaultAssociations/Association_new -t attr -n Identifier -v .%%A -i /DefaultAssociations/Association_new -t attr -n ProgId -v Imagine.%%A -i /DefaultAssociations/Association_new -t attr -n ApplicationName -v "Image & Animation Viewer" -r "/DefaultAssociations/Association_new" -v Association "$LogDir$\defaultassociations.xml.old"> "$LogDir$\defaultassociations.xml"
)
)
rem Set Default Associations for Windows 8
move "$LogDir$\defaultassociations.xml" "%System%"
REG ADD HKLM\Software\Policies\Microsoft\Windows\System /V DefaultAssociationsConfiguration /D "%systemdrive%\windows\system32\defaultassociations.xml" /F
[Files_install_config]
copy "%ScriptPath%\Imagine.ini" "%UserProfileDir%\Anwendungsdaten\Imagine"
[DosInAnIcon_set_config]
attrib +r "$InstallDir$\Imagine.ini"
[Winbatch_install_32]
"$Install32Exe$" /S /D="$InstallDir32$"
[Files_install_32]
; copy the ini file to the InstallDir
copy "$IniCfgFile$" "$InstallDir32$"
copy "%ScriptPath%\*.ini" "$InstallDir32$"
; Example of recursively copying some files into the installation directory:
;
copy -s "%ScriptPath%\X86\*.*" "$InstallDir32$"
[Winbatch_install_64]
"$Install64Exe$" /S /D="$InstallDir64$"
[Files_install_64]
; copy the ini file to the InstallDir
copy "$IniCfgFile$" "$InstallDir64$"
copy "%ScriptPath%\*.ini" "$InstallDir64$"
; Example of recursively copying some files into the installation directory:
;
copy -s "%ScriptPath%\X86_64\*.*" "$InstallDir64$"
[Registry_install]
; Example of setting some values of an registry key:
;
; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
; set "name1" = "some string value"
; set "name2" = REG_DWORD:0001
; set "name3" = REG_BINARY:00 af 99 cd
[LinkFolder_install_32]
; Example of deleting a folder from AllUsers startmenu:
;
set_basefolder common_programs
delete_subfolder $NAME$
;
; Example of creating an shortcut to the installed exe in AllUsers startmenu:
;
set_basefolder common_programs
set_subfolder $NAME$
;
set_link
name: $NAME$
target: "$InstallDir32$\Imagine.exe"
parameters:
working_dir: $InstallDir32$
icon_file:
icon_index:
end_link
;
; Example of creating an shortcut to the installed exe on AllUsers desktop:
;
set_basefolder common_desktopdirectory
set_subfolder ""
;
set_link
name: $NAME$
target: "$InstallDir32$\Imagine.exe"
parameters:
working_dir: $InstallDir32$
icon_file:
icon_index:
end_link
[LinkFolder_install_64]
; Example of deleting a folder from AllUsers startmenu:
;
set_basefolder common_programs
delete_subfolder $NAME$
;
; Example of creating an shortcut to the installed exe in AllUsers startmenu:
;
set_basefolder common_programs
set_subfolder $NAME$
;
set_link
name: $NAME$
target: "$InstallDir64$\Imagine64.exe"
parameters:
working_dir: $InstallDir64$
icon_file:
icon_index:
end_link
;
; Example of creating an shortcut to the installed exe on AllUsers desktop:
;
set_basefolder common_desktopdirectory
set_subfolder ""
;
set_link
name: $NAME$
target: "$InstallDir64$\Imagine64.exe"
parameters:
working_dir: $InstallDir64$
icon_file:
icon_index:
end_link
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
comment "Looks good: setup program gives exitcode zero"
else
comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
if ($ExitCode$ = "1605")
comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed."
comment "Uninstall of a not installed product failed - no problem"
else
if ($ExitCode$ = "1641")
comment "looks good: setup program gives exitcode 1641"
comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
else
if ($ExitCode$ = "3010")
comment "looks good: setup program gives exitcode 3010"
comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success."
else
logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
isFatalError
endif
endif
endif
endif