; Copyright (c) uib gmbh (www.uib.de) ; This sourcecode is owned by uib ; and published under the Terms of the General Public License. ; credits: http://www.opsi.org/en/credits/ [Actions] requiredWinstVersion >= "4.11.2.6" DefVar $UninstallProgram32$ DefVar $UninstallProgramOld32$ DefVar $IniFile32$ DefVar $UninstallProgram64$ DefVar $UninstallProgramOld64$ DefVar $IniFile64$ DefVar $IniCfgFile$ DefVar $LogDir$ DefVar $ProductId$ DefVar $MinimumSpace$ DefVar $InstallDir32$ DefVar $InstallDir64$ DefVar $ExitCode$ DefVar $INST_SystemType$ DefVar $INST_architecture$ DefVar $OLD_VERSION$ DefVar $OLD_CREATOR_TAG$ DefVar $OLD_RELEASE$ Set $INST_SystemType$ = GetSystemType set $INST_architecture$ = GetProductProperty("install_architecture","system specific") Set $LogDir$ = "%SystemDrive%\tmp" ; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh ; and adds the following variables: ; from builder-product.cfg : all variables definded by attribute WINST[index] ; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE ; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL ; auto generated winst-variables ; $IconFile$: path to product picture ; @@BUILDER_VARIABLES@@ ; ---------------------------------------------------------------- ; - Please edit the following values - ; ---------------------------------------------------------------- ;$ProductId$ should be the name of the product in opsi ; therefore please: only lower letters, no umlauts, ; no white space use '-' as a seperator Set $MinimumSpace$ = "1 MB" ; the path were we find the product after the installation Set $InstallDir32$ = "%ProgramFiles32Dir%\Imagine" Set $InstallDir64$ = "%ProgramFiles64Dir%\Imagine" ; ---------------------------------------------------------------- Set $IniCfgFile$ = "%ScriptPath%\opsi-" + $ProductId$ + ".ini" if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$)) LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$ isFatalError ; Stop process and set installation status to failed else comment "Show product picture" ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $NAME$ if FileExists("%ScriptPath%\delsub3264.ins") comment "Start uninstall sub section" Sub "%ScriptPath%\delsub3264.ins" endif comment "installing" if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only") Message "Installing " + $ProductId$ + " "+ $VERSION$ + "-" + $CREATOR_TAG$ + $RELEASE$ + " 32 Bit..." comment "Start setup program" ChangeDirectory "%SCRIPTPATH%" ; Winbatch_install_32 ; Sub_check_exitcode comment "Copy files" Files_install_32 /32Bit Files_install_config /AllNtUserProfiles DosInAnIcon_set_config_32 DosInAnIcon_install_32 comment "Patch Registry" Registry_install /32Bit comment "Create shortcuts" LinkFolder_install_32 endif if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only")) Message "Installing " + $ProductId$ + " "+ $VERSION$ + "-" + $CREATOR_TAG$ + $RELEASE$ + " 64 Bit..." comment "Start setup program" ChangeDirectory "%SCRIPTPATH%" ; Winbatch_install_64 ; Sub_check_exitcode comment "Copy files" Files_install_64 /64Bit Files_install_config /AllNTUserProfiles DosInAnIcon_set_config_64 DosInAnIcon_install_64 comment "Patch Registry" Registry_install /64Bit comment "Create shortcuts" LinkFolder_install_64 endif endif [Files_install_config] copy "%ScriptPath%\Imagine.ini" "%UserProfileDir%\Anwendungsdaten\Imagine" [Winbatch_install_32] "$Install32Exe$" /S /D="$InstallDir32$" [DosInAnIcon_install_32] @echo off SET SC=HKLM\Software\Classes SET Extn=3fr-114 arw-114 cr2-114 crw-114 dcr-114 dng-114 erf-114 kdc-114 mos-114 mrw-114 nef-114 orf-114 pef-114 raf-114 raw-114 srw-114 sr-114 ani-114 anm-114 dib-114 rle-114 cdr-114 cdt-114 pat-114 ccx-114 cmx-114 clp-114 cur-114 dcm-114 dicom-114 dcx-114 dds-114 emf-114 exr-114 sxr-114 mxr-114 flc-114 fli-114 hdp-114 jxr-114 wdp-114 hdr-114 icl-114 ico-114 ics-114 jbg-114 jbig-114 jp2-114 jpc-114 j2k-114 jpg-114 jpe-114 jpeg-114 lbm-114 lbmp-114 iff-114 mac-114 macp-114 mbm-114 mng-114 bpm-114 pcd-114 pcx-114 pdn-114 pgm-114 pic-114 cel-114 png-114 ppm-114 psd-114 8psd-114 psp-114 ras-114 rla-114 rle-114 sgi-114 rgb-114 bw-114 spr-114 wbmp-114 wap-114 wbm-114 webp-114 wmf-114 wpg-114 xbm-114 xcf-114 xpm-114 zip-114 cbz-114 7z-114 cb7-114 arj-114 lzh-114 rar-114 cbr-114 alz-114 egg-114 tar-114 gz-114 bz2-114 iso-114 cab-114 FOR %%j IN (%Extn%) DO ( FOR /F "tokens=1,2 delims=-" %%A IN ("%%j") DO ( REG ADD %SC%\.%%A /VE /D "Imagine.%%A" /F REG ADD %SC%\Imagine.%%A /VE /D "%%A Image" /F REG ADD %SC%\Imagine.%%A\DefaultIcon /VE /D "$InstallDir32$\Imagine.dll,%%B" /F REG ADD %SC%\Imagine.%%A\shell\open\command /VE /D "\"$InstallDir32$\Imagine.exe\" \"%%1\"" /F ) ) SET Extn=bmp-187 dds-188 gif-189 jpg-190 jpeg-190 pcx-191 png-192 psd-193 tga-194 tif-195 tiff-195 FOR %%j IN (%Extn%) DO ( FOR /F "tokens=1,2 delims=-" %%A IN ("%%j") DO ( REG ADD %SC%\.%%A /VE /D "Imagine.%%A" /F REG ADD %SC%\Imagine.%%A /VE /D "%%A Image" /F REG ADD %SC%\Imagine.%%A\DefaultIcon /VE /D "$InstallDir32$\Imagine.dll,%%B" /F REG ADD %SC%\Imagine.%%A\shell\open\command /VE /D "\"$InstallDir32$\Imagine.exe\" \"%%1\"" /F ) ) [Files_install_32] ; copy the ini file to the InstallDir copy "$IniCfgFile$" "$InstallDir32$" copy "%ScriptPath%\*.ini" "$InstallDir32$" ; Example of recursively copying some files into the installation directory: ; copy -s "%ScriptPath%\X86\*.*" "$InstallDir32$" [DosInAnIcon_set_config_32] attrib +r "$InstallDir32$\Imagine.ini" [Winbatch_install_64] "$Install64Exe$" /S /D="$InstallDir64$" [DosInAnIcon_install_64] @echo off SET SC=HKLM\Software\Classes SET Extn=3fr-114 arw-114 cr2-114 crw-114 dcr-114 dng-114 erf-114 kdc-114 mos-114 mrw-114 nef-114 orf-114 pef-114 raf-114 raw-114 srw-114 sr-114 ani-114 anm-114 dib-114 rle-114 cdr-114 cdt-114 pat-114 ccx-114 cmx-114 clp-114 cur-114 dcm-114 dicom-114 dcx-114 dds-114 emf-114 exr-114 sxr-114 mxr-114 flc-114 fli-114 hdp-114 jxr-114 wdp-114 hdr-114 icl-114 ico-114 ics-114 jbg-114 jbig-114 jp2-114 jpc-114 j2k-114 jpg-114 jpe-114 jpeg-114 lbm-114 lbmp-114 iff-114 mac-114 macp-114 mbm-114 mng-114 bpm-114 pcd-114 pcx-114 pdn-114 pgm-114 pic-114 cel-114 png-114 ppm-114 psd-114 8psd-114 psp-114 ras-114 rla-114 rle-114 sgi-114 rgb-114 bw-114 spr-114 wbmp-114 wap-114 wbm-114 webp-114 wmf-114 wpg-114 xbm-114 xcf-114 xpm-114 zip-114 cbz-114 7z-114 cb7-114 arj-114 lzh-114 rar-114 cbr-114 alz-114 egg-114 tar-114 gz-114 bz2-114 iso-114 cab-114 FOR %%j IN (%Extn%) DO ( FOR /F "tokens=1,2 delims=-" %%A IN ("%%j") DO ( REG ADD %SC%\.%%A /VE /D "Imagine.%%A" /F REG ADD %SC%\Imagine.%%A /VE /D "%%A Image" /F REG ADD %SC%\Imagine.%%A\DefaultIcon /VE /D "$InstallDir64$\Imagine64.dll,%%B" /F REG ADD %SC%\Imagine.%%A\shell\open\command /VE /D "\"$InstallDir64$\Imagine64.exe\" \"%%1\"" /F ) ) SET Extn=bmp-187 dds-188 gif-189 jpg-190 jpeg-190 pcx-191 png-192 psd-193 tga-194 tif-195 tiff-195 FOR %%j IN (%Extn%) DO ( FOR /F "tokens=1,2 delims=-" %%A IN ("%%j") DO ( REG ADD %SC%\.%%A /VE /D "Imagine.%%A" /F REG ADD %SC%\Imagine.%%A /VE /D "%%A Image" /F REG ADD %SC%\Imagine.%%A\DefaultIcon /VE /D "$InstallDir64$\Imagine64.dll,%%B" /F REG ADD %SC%\Imagine.%%A\shell\open\command /VE /D "\"$InstallDir64$\Imagine64.exe\" \"%%1\"" /F ) ) [Files_install_64] ; copy the ini file to the InstallDir copy "$IniCfgFile$" "$InstallDir64$" copy "%ScriptPath%\*.ini" "$InstallDir64$" ; Example of recursively copying some files into the installation directory: ; copy -s "%ScriptPath%\X86_64\*.*" "$InstallDir64$" [DosInAnIcon_set_config_64] attrib +r "$InstallDir64$\Imagine.ini" [Registry_install] ; Example of setting some values of an registry key: ; ; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$] ; set "name1" = "some string value" ; set "name2" = REG_DWORD:0001 ; set "name3" = REG_BINARY:00 af 99 cd [LinkFolder_install_32] ; Example of deleting a folder from AllUsers startmenu: ; set_basefolder common_programs delete_subfolder $NAME$ ; ; Example of creating an shortcut to the installed exe in AllUsers startmenu: ; set_basefolder common_programs set_subfolder $NAME$ ; set_link name: $NAME$ target: "$InstallDir32$\Imagine.exe" parameters: working_dir: $InstallDir32$ icon_file: icon_index: end_link ; ; Example of creating an shortcut to the installed exe on AllUsers desktop: ; set_basefolder common_desktopdirectory set_subfolder "" ; set_link name: $NAME$ target: "$InstallDir32$\Imagine.exe" parameters: working_dir: $InstallDir32$ icon_file: icon_index: end_link [LinkFolder_install_64] ; Example of deleting a folder from AllUsers startmenu: ; set_basefolder common_programs delete_subfolder $NAME$ ; ; Example of creating an shortcut to the installed exe in AllUsers startmenu: ; set_basefolder common_programs set_subfolder $NAME$ ; set_link name: $NAME$ target: "$InstallDir64$\Imagine64.exe" parameters: working_dir: $InstallDir64$ icon_file: icon_index: end_link ; ; Example of creating an shortcut to the installed exe on AllUsers desktop: ; set_basefolder common_desktopdirectory set_subfolder "" ; set_link name: $NAME$ target: "$InstallDir64$\Imagine64.exe" parameters: working_dir: $InstallDir64$ icon_file: icon_index: end_link [Sub_check_exitcode] comment "Test for installation success via exit code" set $ExitCode$ = getLastExitCode ; informations to exit codes see ; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx ; http://msdn.microsoft.com/en-us/library/aa368542.aspx if ($ExitCode$ = "0") comment "Looks good: setup program gives exitcode zero" else comment "Setup program gives a exitcode unequal zero: " + $ExitCode$ if ($ExitCode$ = "1605") comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed." comment "Uninstall of a not installed product failed - no problem" else if ($ExitCode$ = "1641") comment "looks good: setup program gives exitcode 1641" comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success." else if ($ExitCode$ = "3010") comment "looks good: setup program gives exitcode 3010" comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success." else logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$ isFatalError endif endif endif endif