initial commit

CLIENT_DATA/delsub32.ins

@@ -0,0 +1,79 @@
+; Copyright (c) uib gmbh (www.uib.de)
+; This sourcecode is owned by uib gmbh
+; and published under the Terms of the General Public License.
+; credits: http://www.opsi.org/credits/
+
+
+Set $MsiId$ = '{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}'
+
+Message "Uninstalling " + $ProductId$ + " ..."
+
+if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId$ + "] DisplayName") = "")
+	comment "MSI id " + $MsiId$ + " found in registry, starting msiexec to uninstall"
+	Winbatch_uninstall_msi
+	sub_check_exitcode
+endif
+
+comment "Delete files"
+Files_uninstall /32Bit
+
+comment "Cleanup registry"
+Registry_uninstall /32Bit
+
+comment "Delete program shortcuts"
+LinkFolder_uninstall
+
+[Winbatch_uninstall_msi]
+msiexec /x $MsiId$ /qb! REBOOT=ReallySuppress
+
+[Files_uninstall]
+; Example for recursively deleting the installation directory (don't forget the trailing backslash):
+;
+; delete -sf "$InstallDir$\"
+
+[Registry_uninstall]
+; Example of deleting a registry key:
+;
+; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
+
+[LinkFolder_uninstall]
+; Example of deleting a folder from AllUsers startmenu:
+;
+; set_basefolder common_programs
+; delete_subfolder $ProductId$
+;
+; Example of deleting a shortcut from AllUsers desktop:
+;
+; set_basefolder common_desktopdirectory
+; set_subfolder ""
+; delete_element $ProductId$
+
+[Sub_check_exitcode]
+comment "Test for installation success via exit code"
+set $ExitCode$ = getLastExitCode
+; informations to exit codes see
+; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
+; http://msdn.microsoft.com/en-us/library/aa368542.aspx
+if ($ExitCode$ = "0")
+	comment "Looks good: setup program gives exitcode zero"
+else
+	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
+	if ($ExitCode$ = "1605")
+		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
+		comment "Uninstall of a not installed product failed - no problem"
+	else
+		if ($ExitCode$ = "1641")
+			comment "looks good: setup program gives exitcode 1641"
+			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
+		else
+			if ($ExitCode$ = "3010")
+				comment "looks good: setup program gives exitcode 3010"
+				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
+			else
+				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
+				isFatalError
+			endif
+		endif
+	endif
+endif
+

CLIENT_DATA/setup32.ins

@@ -0,0 +1,207 @@
+; Copyright (c) uib gmbh (www.uib.de)
+; This sourcecode is owned by uib
+; and published under the Terms of the General Public License.
+; credits: http://www.opsi.org/credits/
+
+[Actions]
+requiredWinstVersion >= "4.10.8.6"
+
+DefVar $MsiId$
+DefVar $LogDir$
+DefVar $ProductId$  
+DefVar $MinimumSpace$
+DefVar $InstallDir$
+DefVar $ExitCode$
+DefVar $LicenseRequired$
+DefVar $LicenseKey$
+DefVar $LicensePool$
+
+Set $LogDir$ = "%SystemDrive%\tmp"
+
+; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh
+; and adds the following variables:
+;   from builder-product.cfg :  all variables definded by attribute WINST[index]
+;   from builder-product.cfg :  VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE   
+;   from opsi-builder.cfg    :  CREATOR_TAG CREATOR_NAME CREATOR_EMAIL           
+;   auto generated winst-variables
+;         $IconFile$: path to product picture
+;
+@@BUILDER_VARIABLES@@
+
+; ----------------------------------------------------------------
+; - Please edit the following values                             -
+; ----------------------------------------------------------------
+;$ProductId$ should be the name of the product in opsi
+; therefore please: only lower letters, no umlauts, 
+; no white space use '-' as a seperator
+Set $ProductId$       = "paperport"
+Set $MinimumSpace$    = "200 MB"
+; the path were we find the product after the installation
+Set $InstallDir$      = "%ProgramFiles32Dir%\<path to the product>"
+Set $LicenseRequired$ = "false"
+Set $LicensePool$     = "p_" + $ProductId$
+; ----------------------------------------------------------------
+
+if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
+	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
+	isFatalError
+	; Stop process and set installation status to failed
+else
+	comment "Show product picture"
+	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
+	
+	if FileExists("%ScriptPath%\delsub32.ins")
+		comment "Start uninstall sub section"
+		Sub "%ScriptPath%\delsub32.ins"
+	endif
+	
+	Message "Installing " + $ProductId$ + " ..."
+	
+	if $LicenseRequired$ = "true"
+		comment "Licensing required, reserve license and get license key"
+		Sub_get_licensekey
+	endif
+	
+	comment "Start setup program"
+	Winbatch_install
+	Sub_check_exitcode
+	
+	comment "Copy files"
+	Files_install /32Bit
+	
+	comment "Patch Registry"
+	Registry_install /32Bit
+	
+	comment "Create shortcuts"
+	LinkFolder_install
+	
+	comment "Test for installation success"
+	; Test if software marked as installed in registry
+	; if (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}] DisplayName") = "")
+	; 	logError "Fatal: After Installation 32 bit [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}] not found"
+	; 	isFatalError
+	; else
+	; 	comment "Successful Installation"
+	; endif
+
+endif
+
+[Winbatch_install]
+; === MSI package =======================================================================================
+; You may use the parameter PIDKEY=$Licensekey$
+msiexec /i "$InstallMsi$" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=2 REBOOT=ReallySuppress
+
+[Files_install]
+; Example of recursively copying some files into the installation directory:
+;
+; copy -s "%ScriptPath%\files\*.*" "$InstallDir$"
+
+[Registry_install]
+; Example of setting some values of an registry key:
+;
+; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
+; set "name1" = "some string value"
+; set "name2" = REG_DWORD:0001
+; set "name3" = REG_BINARY:00 af 99 cd
+
+[LinkFolder_install]
+; Example of deleting a folder from AllUsers startmenu:
+;
+; set_basefolder common_programs
+; delete_subfolder $ProductId$
+;
+; Example of creating an shortcut to the installed exe in AllUsers startmenu:
+;
+; set_basefolder common_programs
+; set_subfolder $ProductId$
+;
+; set_link
+; 	name: $ProductId$
+; 	target: <path to the program>
+; 	parameters:
+; 	working_dir: $InstallDir$
+; 	icon_file:
+; 	icon_index:
+; end_link
+;
+; Example of creating an shortcut to the installed exe on AllUsers desktop:
+;
+; set_basefolder common_desktopdirectory
+; set_subfolder ""
+;
+; set_link
+; 	name: $ProductId$
+; 	target: <path to the program>
+; 	parameters: <some_param>
+; 	working_dir: $InstallDir$
+; 	icon_file: <path to icon file>
+; 	icon_index: 2
+; end_link
+
+[Sub_get_licensekey]
+if opsiLicenseManagementEnabled
+	comment "License management is enabled and will be used"
+
+	comment "Trying to get a license key"
+	Set $LicenseKey$ = demandLicenseKey ($LicensePool$)
+	; If there is an assignment of exactly one licensepool to the product the following call is possible:
+	; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$)
+	;
+	; If there is an assignment of a license pool to a windows software id, it is possible to use:
+	; DefVar $WindowsSoftwareId$
+	; $WindowsSoftwareId$ = "..."
+	; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$)
+	
+	DefVar $ServiceErrorClass$
+	set $ServiceErrorClass$ = getLastServiceErrorClass
+	comment "Error class: " + $ServiceErrorClass$
+	
+	if $ServiceErrorClass$ = "None"
+		comment "Everything fine, we got the license key '" + $LicenseKey$ + "'"
+	else
+		if $ServiceErrorClass$ = "LicenseConfigurationError"
+			LogError "Fatal: license configuration must be corrected"
+			LogError getLastServiceErrorMessage
+			isFatalError
+		else 
+			if $ServiceErrorClass$ = "LicenseMissingError"
+				LogError "Fatal: required license is not supplied"
+				isFatalError
+			endif
+		endif
+	endif
+else
+	LogError "Fatal: license required, but license management not enabled"
+	isFatalError
+endif
+
+
+[Sub_check_exitcode]
+comment "Test for installation success via exit code"
+set $ExitCode$ = getLastExitCode
+; informations to exit codes see
+; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
+; http://msdn.microsoft.com/en-us/library/aa368542.aspx
+if ($ExitCode$ = "0")
+	comment "Looks good: setup program gives exitcode zero"
+else
+	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
+	if ($ExitCode$ = "1605")
+		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
+		comment "Uninstall of a not installed product failed - no problem"
+	else
+		if ($ExitCode$ = "1641")
+			comment "looks good: setup program gives exitcode 1641"
+			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
+		else
+			if ($ExitCode$ = "3010")
+				comment "looks good: setup program gives exitcode 3010"
+				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
+			else
+				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
+				isFatalError
+			endif
+		endif
+	endif
+endif
+

CLIENT_DATA/uninstall32.ins

@@ -0,0 +1,67 @@
+; Copyright (c) uib gmbh (www.uib.de)
+; This sourcecode is owned by uib gmbh
+; and published under the Terms of the General Public License.
+; credits: http://www.opsi.org/credits/
+
+[Actions]
+requiredWinstVersion >= "4.10.8.6"
+
+DefVar $MsiId$
+DefVar $LogDir$
+DefVar $ExitCode$
+DefVar $ProductId$
+DefVar $InstallDir$
+DefVar $LicenseRequired$
+DefVar $LicensePool$
+
+Set $LogDir$ = "%SystemDrive%\tmp"
+
+; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh
+; and adds the following variables:
+;   from builder-product.cfg :  all variables definded by attribute WINST[index]
+;   from builder-product.cfg :  VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE   
+;   from opsi-builder.cfg    :  CREATOR_TAG CREATOR_NAME CREATOR_EMAIL           
+;   auto generated winst-variables
+;         $IconFile$: path to product picture
+;
+@@BUILDER_VARIABLES@@
+
+; ----------------------------------------------------------------
+; - Please edit the following values                             -
+; ----------------------------------------------------------------
+Set $ProductId$       = "paperport"
+Set $InstallDir$      = "%ProgramFiles32Dir%\<path to the product>"
+Set $LicenseRequired$ = "false"
+Set $LicensePool$     = "p_" + $ProductId$
+; ----------------------------------------------------------------
+
+
+comment "Show product picture"
+ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
+
+Message "Uninstalling " + $ProductId$ + " ..."
+
+if FileExists("%ScriptPath%\delsub32.ins")
+	comment "Start uninstall sub section"
+	Sub "%ScriptPath%\delsub32.ins"
+endif
+
+if $LicenseRequired$ = "true"
+	comment "Licensing required, free license used"
+	Sub_free_license
+endif
+
+[Sub_free_license]
+comment "License management is enabled and will be used"
+
+comment "Trying to free license used for the product"
+DefVar $result$
+Set $result$ = FreeLicense($LicensePool$)
+; If there is an assignment of a license pool to the product, it is possible to use
+; Set $result$ = FreeLicense("", $ProductId$)
+;
+; If there is an assignment of a license pool to a windows software id, it is possible to use
+; DefVar $WindowsSoftwareId$
+; $WindowsSoftwareId$ = "..."
+; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)
+

OPSI/changelog.txt

@@ -0,0 +1,2 @@
+Don't add cahngelog entries here!
+It get autogenerated by the opsi-builder.sh

OPSI/control

@@ -0,0 +1,37 @@
+[Package]
+version: RELEASE
+depends: 
+incremental: False
+
+[Product]
+type: localboot
+id: paperport
+name: paperport
+description: PaperPort
+advice: ADVICE
+version: VERSION
+priority: PRIORITY
+licenseRequired: False
+productClasses: 
+setupScript: setup32.ins
+uninstallScript: uninstall32.ins
+updateScript: 
+alwaysScript: 
+onceScript: 
+customScript: 
+userLoginScript: 
+
+[ProductProperty]
+type: unicode
+name: install_architecture
+multivalue: False
+editable: False
+description: which architecture (32/64 bit) has to be installed
+values: ["32 only", "64 only", "both", "system specific"]
+default: ["system specific"]
+
+[ProductDependency]
+action: setup
+requiredProduct: aio
+requiredStatus: installed
+requirementType: before

OPSI/postinst

@@ -0,0 +1,9 @@
+#! /bin/sh
+#
+# postinst script for softprod
+# This script executes after unpacking files from that archive and registering the product at the server.
+#
+# The following environment variables can be used to obtain information about the current installation:
+#   PRODUCT_ID: id of the current product
+#   CLIENT_DATA_DIR: directory which contains the installed client data
+#

OPSI/preinst

@@ -0,0 +1,9 @@
+#! /bin/sh
+#
+# preinst script for softprod
+# This script executes before that package will be unpacked from its archive file.
+#
+# The following environment variables can be used to obtain information about the current installation:
+#   PRODUCT_ID: id of the current product
+#   CLIENT_DATA_DIR: directory where client data will be installed
+#

PP14_Pro_BEFIGSD_Trial.exe.sha1sum

@@ -0,0 +1 @@
+9c828759e39ecc46b034a36f11ed1e12244f7702  /home/mario/.opsi-dist-cache/paperport-14/X86/PP14_Pro_BEFIGSD_Trial.exe

PaperPort-Anywhere.png.sha1sum

@@ -0,0 +1 @@
+e1669e62f4013a6ca7741da0c29a2cf053409311  /home/mario/.opsi-dist-cache/paperport-14//PaperPort-Anywhere.png

Testing.txt

@@ -0,0 +1,28 @@
+*** Qualitiymanagement/Testing procedure
+
+- Product:
+        - Name: productname
+        - Version: xxx
+        - Release: yyyy
+
+- Environment
+        - OS: Native windows XP-32Bit installation
+	- Preinstalled packages: None (also no aio)
+	- Files used while testing:
+                File1: http://domain.de/file.ext
+
+- Testing process:
+        OPSI-action:
+                - Installation (without dependencies like AIO/Firefox): ??
+        Result:   
+                - File extensions related to program: ??
+                - Start menu entry: ??
+                - Starting/using program: viewer works, File1 is shown correctly: ??
+
+        OPSI-action:
+                - Uninstall
+        Result:
+                - File extensions related to program: unrelated: ??
+                - Start menu entry: none: ??
+
+

builder-product.cfg

@@ -0,0 +1,29 @@
+############################
+# Setup product information 
+############################
+VENDOR="nuance.de"
+PN="paperport"
+VERSION="14"
+RELEASE="3"
+PRIORITY="0"
+ADVICE=""
+
+# TYPE - defines, if the install files are public or restricted. 
+# Valid value: restricted | public
+TYPE="public"
+
+  
+DL_FILE[0]="PaperPort-Anywhere.png"
+DL_SOURCE[0]="http://www.download4a.com/Android_Icons/PaperPort-Anywhere.png"
+
+DL_FILE[1]="PP14_Pro_BEFIGSD_Trial.exe"
+DL_SOURCE[1]="http://content.nuance.com/PP14/PP14_Pro_BEFIGSD_Trial.exe"
+DL_ARCH[1]="X86"
+DL_DOWNLOADER[1]="wget"
+DL_EXTRACT_FORMAT[1]="7zip"
+
+# File array index for the image showing while installing the program
+ICON_DL_INDEX=0
+
+WINST_NAME[0]=InstallMsi
+WINST_VALUE[0]="@DL_EXTRACT_WINST_PATH[1]@\\PaperPort\\Nuance PaperPort 14.msi"

builder-targets-cb.sh

@@ -0,0 +1,25 @@
+##############################################################################
+# This optional file "builder-targets-cb.sh" will be called by builder.sh 
+# 
+# The targets will be called from thde opsi-builder using the following
+# order: config, prepare, retrieve, create, package, publish, commit, cleanup 
+# You can overwrite the target functions in builder-targets-cb.sh
+# 
+# You can define callback functions. The functions are called from
+# opsi-builder within processing a target
+#   cb_package_makeproductfile
+#
+# You can use every variable defined in any configuration file or by
+# the defined builder script itself. Also, calling the predefined
+# targets builder_<targetname> is possible.
+#
+# Abstract:
+#  target order: config, prepare, retrieve, create, package, publish, commit, cleanup
+#  callbacks: <none>
+#
+##############################################################################
+
+function cleanup() {
+    echo "Cleanup"
+    builder_cleanup
+}