commit 6bdb8731c22182534084de1e91b5bfde56b3c0f9 Author: Mario Fetka Date: Mon May 14 20:50:52 2012 +0200 Initial Commit of addpath tool diff --git a/CLIENT_DATA/delsub3264.ins b/CLIENT_DATA/delsub3264.ins new file mode 100644 index 0000000..93c19c9 --- /dev/null +++ b/CLIENT_DATA/delsub3264.ins @@ -0,0 +1,79 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib gmbh +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/credits/ + + +if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only") + Message "Uninstalling " + $ProductId$ + " 32 Bit..." + + comment "Delete files" + Files_uninstall_32 /32Bit + comment "Cleanup registry" + Registry_uninstall /32Bit +endif + +if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only")) + Message "Uninstalling " + $ProductId$ + " 64 Bit..." + + comment "Delete files" + Files_uninstall_64 /64Bit + comment "Cleanup registry" + Registry_uninstall /64Bit +endif + +comment "Delete program shortcuts" +LinkFolder_uninstall + +[Files_uninstall_32] +delete -sf "$InstallDir32$\addpath.exe" + +[Files_uninstall_64] +delete -sf "$InstallDir64$\addpath.exe" + +[Registry_uninstall] +; Example of deleting a registry key: +; +; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$] + +[LinkFolder_uninstall] +; Example of deleting a folder from AllUsers startmenu: +; +; set_basefolder common_programs +; delete_subfolder $ProductId$ +; +; Example of deleting a shortcut from AllUsers desktop: +; +; set_basefolder common_desktopdirectory +; set_subfolder "" +; delete_element $ProductId$ + +[Sub_check_exitcode] +comment "Test for installation success via exit code" +set $ExitCode$ = getLastExitCode +; informations to exit codes see +; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx +; http://msdn.microsoft.com/en-us/library/aa368542.aspx +if ($ExitCode$ = "0") + comment "Looks good: setup program gives exitcode zero" +else + comment "Setup program gives a exitcode unequal zero: " + $ExitCode$ + if ($ExitCode$ = "1605") + comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed." + comment "Uninstall of a not installed product failed - no problem" + else + if ($ExitCode$ = "1641") + comment "looks good: setup program gives exitcode 1641" + comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success." + else + if ($ExitCode$ = "3010") + comment "looks good: setup program gives exitcode 3010" + comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success." + else + logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$ + isFatalError + endif + endif + endif +endif + diff --git a/CLIENT_DATA/setup3264.ins b/CLIENT_DATA/setup3264.ins new file mode 100644 index 0000000..fc24f4b --- /dev/null +++ b/CLIENT_DATA/setup3264.ins @@ -0,0 +1,161 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/credits/ + +[Actions] +requiredWinstVersion >= "4.10.8.6" + +DefVar $LogDir$ +DefVar $ProductId$ +DefVar $MinimumSpace$ +DefVar $InstallDir32$ +DefVar $InstallDir64$ +DefVar $ExitCode$ +DefVar $INST_SystemType$ +DefVar $INST_architecture$ + +Set $INST_SystemType$ = GetSystemType +set $INST_architecture$ = GetProductProperty("install_architecture","system specific") + + +Set $LogDir$ = "%SystemDrive%\tmp" + +; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh +; and adds the following variables: +; from builder-product.cfg : all variables definded by attribute WINST[index] +; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE +; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL +; auto generated winst-variables +; $IconFile$: path to product picture +; +@@BUILDER_VARIABLES@@ + +; ---------------------------------------------------------------- +; - Please edit the following values - +; ---------------------------------------------------------------- +;$ProductId$ should be the name of the product in opsi +; therefore please: only lower letters, no umlauts, +; no white space use '-' as a seperator +Set $ProductId$ = "kliu.addpath" +Set $MinimumSpace$ = "1 MB" +; the path were we find the product after the installation +Set $InstallDir32$ = "%Systemroot%" +Set $InstallDir64$ = "%Systemroot%" +; ---------------------------------------------------------------- + +if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$)) + LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$ + isFatalError + ; Stop process and set installation status to failed +else + comment "Show product picture" + ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ + + if FileExists("%ScriptPath%\delsub3264.ins") + comment "Start uninstall sub section" + Sub "%ScriptPath%\delsub3264.ins" + endif + + comment "installing" + + if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only") + Message "Installing " + $ProductId$ + " 32 Bit..." + comment "Copy files" + Files_install_32 /32Bit + comment "Patch Registry" + Registry_install /32Bit + comment "Create shortcuts" + LinkFolder_install + endif + + if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only")) + Message "Installing " + $ProductId$ + " 64 Bit..." + comment "Copy files" + Files_install_64 /64Bit + comment "Patch Registry" + Registry_install /64Bit + comment "Create shortcuts" + LinkFolder_install + endif + +endif + +[Files_install_32] +copy "$AddPath32Exe$" "$InstallDir32$" + + +[Files_install_64] +copy "$AddPath64Exe$" "$InstallDir64$" + +[Registry_install] +; Example of setting some values of an registry key: +; +; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$] +; set "name1" = "some string value" +; set "name2" = REG_DWORD:0001 +; set "name3" = REG_BINARY:00 af 99 cd + +[LinkFolder_install] +; Example of deleting a folder from AllUsers startmenu: +; +; set_basefolder common_programs +; delete_subfolder $ProductId$ +; +; Example of creating an shortcut to the installed exe in AllUsers startmenu: +; +; set_basefolder common_programs +; set_subfolder $ProductId$ +; +; set_link +; name: $ProductId$ +; target: +; parameters: +; working_dir: $InstallDir$ +; icon_file: +; icon_index: +; end_link +; +; Example of creating an shortcut to the installed exe on AllUsers desktop: +; +; set_basefolder common_desktopdirectory +; set_subfolder "" +; +; set_link +; name: $ProductId$ +; target: +; parameters: +; working_dir: $InstallDir$ +; icon_file: +; icon_index: 2 +; end_link + +[Sub_check_exitcode] +comment "Test for installation success via exit code" +set $ExitCode$ = getLastExitCode +; informations to exit codes see +; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx +; http://msdn.microsoft.com/en-us/library/aa368542.aspx +if ($ExitCode$ = "0") + comment "Looks good: setup program gives exitcode zero" +else + comment "Setup program gives a exitcode unequal zero: " + $ExitCode$ + if ($ExitCode$ = "1605") + comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed." + comment "Uninstall of a not installed product failed - no problem" + else + if ($ExitCode$ = "1641") + comment "looks good: setup program gives exitcode 1641" + comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success." + else + if ($ExitCode$ = "3010") + comment "looks good: setup program gives exitcode 3010" + comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success." + else + logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$ + isFatalError + endif + endif + endif +endif + diff --git a/CLIENT_DATA/uninstall3264.ins b/CLIENT_DATA/uninstall3264.ins new file mode 100644 index 0000000..a546b5d --- /dev/null +++ b/CLIENT_DATA/uninstall3264.ins @@ -0,0 +1,53 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib gmbh +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/credits/ + +[Actions] +requiredWinstVersion >= "4.10.8.6" + +DefVar $LogDir$ +DefVar $ExitCode$ +DefVar $ProductId$ +DefVar $InstallDir32$ +DefVar $InstallDir64$ +DefVar $LicenseRequired$ +DefVar $LicensePool$ +DefVar $INST_SystemType$ +DefVar $INST_architecture$ + +Set $INST_SystemType$ = GetSystemType +set $INST_architecture$ = GetProductProperty("install_architecture","system specific") + + +Set $LogDir$ = "%SystemDrive%\tmp" + +; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh +; and adds the following variables: +; from builder-product.cfg : all variables definded by attribute WINST[index] +; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE +; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL +; auto generated winst-variables +; $IconFile$: path to product picture +; +@@BUILDER_VARIABLES@@ + +; ---------------------------------------------------------------- +; - Please edit the following values - +; ---------------------------------------------------------------- +Set $ProductId$ = "kliu.addpath" +Set $InstallDir32$ = "%Systemroot%" +Set $InstallDir64$ = "%Systemroot%" +; ---------------------------------------------------------------- + + +comment "Show product picture" +ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ + +Message "Uninstalling " + $ProductId$ + " ..." + +if FileExists("%ScriptPath%\delsub3264.ins") + comment "Start uninstall sub section" + Sub "%ScriptPath%\delsub3264.ins" +endif + diff --git a/OPSI/changelog.txt b/OPSI/changelog.txt new file mode 100644 index 0000000..bc69317 --- /dev/null +++ b/OPSI/changelog.txt @@ -0,0 +1,2 @@ +Don't add cahngelog entries here! +It get autogenerated by the opsi-builder.sh \ No newline at end of file diff --git a/OPSI/control b/OPSI/control new file mode 100644 index 0000000..db9f3a9 --- /dev/null +++ b/OPSI/control @@ -0,0 +1,32 @@ +[Package] +version: RELEASE +depends: +incremental: False + +[Product] +type: localboot +id: kliu.addpath +name: AddPath +description: tool to append/prepend to the system's PATH environment variable +advice: ADVICE +version: VERSION +priority: PRIORITY +licenseRequired: False +productClasses: +setupScript: setup3264.ins +uninstallScript: uninstall3264.ins +updateScript: +alwaysScript: +onceScript: +customScript: +userLoginScript: + +[ProductProperty] +type: unicode +name: install_architecture +multivalue: False +editable: False +description: which architecture (32/64 bit) has to be installed +values: ["32 only", "64 only", "both", "system specific"] +default: ["system specific"] + diff --git a/OPSI/postinst b/OPSI/postinst new file mode 100644 index 0000000..a8e33fc --- /dev/null +++ b/OPSI/postinst @@ -0,0 +1,9 @@ +#! /bin/sh +# +# postinst script for softprod +# This script executes after unpacking files from that archive and registering the product at the server. +# +# The following environment variables can be used to obtain information about the current installation: +# PRODUCT_ID: id of the current product +# CLIENT_DATA_DIR: directory which contains the installed client data +# diff --git a/OPSI/preinst b/OPSI/preinst new file mode 100644 index 0000000..15a5320 --- /dev/null +++ b/OPSI/preinst @@ -0,0 +1,9 @@ +#! /bin/sh +# +# preinst script for softprod +# This script executes before that package will be unpacked from its archive file. +# +# The following environment variables can be used to obtain information about the current installation: +# PRODUCT_ID: id of the current product +# CLIENT_DATA_DIR: directory where client data will be installed +# diff --git a/Testing.txt b/Testing.txt new file mode 100644 index 0000000..d6b5e6c --- /dev/null +++ b/Testing.txt @@ -0,0 +1,28 @@ +*** Qualitiymanagement/Testing procedure + +- Product: + - Name: productname + - Version: xxx + - Release: yyyy + +- Environment + - OS: Native windows XP-32Bit installation + - Preinstalled packages: None (also no aio) + - Files used while testing: + File1: http://domain.de/file.ext + +- Testing process: + OPSI-action: + - Installation (without dependencies like AIO/Firefox): ?? + Result: + - File extensions related to program: ?? + - Start menu entry: ?? + - Starting/using program: viewer works, File1 is shown correctly: ?? + + OPSI-action: + - Uninstall + Result: + - File extensions related to program: unrelated: ?? + - Start menu entry: none: ?? + + diff --git a/addpath-1.3.1-redist.7z.sha1sum b/addpath-1.3.1-redist.7z.sha1sum new file mode 100644 index 0000000..a530978 --- /dev/null +++ b/addpath-1.3.1-redist.7z.sha1sum @@ -0,0 +1 @@ +0b9a680585ef139bfd7b5c87206060e7dcc431c0 /home/mario/.opsi-dist-cache/kliu.addpath-1.3.1/X86/addpath-1.3.1-redist.7z diff --git a/builder-product.cfg b/builder-product.cfg new file mode 100644 index 0000000..f63bada --- /dev/null +++ b/builder-product.cfg @@ -0,0 +1,33 @@ +############################ +# Setup product information +############################ +VENDOR="code.kliu.org" +PN="kliu.addpath" +VERSION="1.3.1" +RELEASE="3" +PRIORITY="0" +ADVICE="" + +# TYPE - defines, if the install files are public or restricted. +# Valid value: restricted | public +TYPE="public" + + +DL_FILE[0]="regedit_icon__scalable__by_lopagof.png" +DL_SOURCE[0]="http://1.bp.blogspot.com/-_QRptHo2SlM/T6y1UtZwCBI/AAAAAAAAAXo/qhOhruOPZU0/s320/regedit_icon__scalable__by_lopagof.png" + +DL_FILE[1]="addpath-${VERSION}-redist.7z" +DL_SOURCE[1]="http://code.kliu.org/misc/addpath/addpath-${VERSION}-redist.7z" +DL_ARCH[1]="X86" +DL_EXTRACT_FORMAT[1]="7zip" + +# File array index for the image showing while installing the program +ICON_DL_INDEX=0 + +WINST_NAME[0]="AddPath32Exe" +WINST_VALUE[0]="@DL_EXTRACT_WINST_PATH[1]@\\bin.x86-32\\addpath.exe" + +WINST_NAME[1]="AddPath64Exe" +WINST_VALUE[1]="@DL_EXTRACT_WINST_PATH[1]@\\bin.x86-64\\addpath.exe" + + diff --git a/builder-targets-cb.sh b/builder-targets-cb.sh new file mode 100644 index 0000000..9a3d4a8 --- /dev/null +++ b/builder-targets-cb.sh @@ -0,0 +1,25 @@ +############################################################################## +# This optional file "builder-targets-cb.sh" will be called by builder.sh +# +# The targets will be called from thde opsi-builder using the following +# order: config, prepare, retrieve, create, package, publish, commit, cleanup +# You can overwrite the target functions in builder-targets-cb.sh +# +# You can define callback functions. The functions are called from +# opsi-builder within processing a target +# cb_package_makeproductfile +# +# You can use every variable defined in any configuration file or by +# the defined builder script itself. Also, calling the predefined +# targets builder_ is possible. +# +# Abstract: +# target order: config, prepare, retrieve, create, package, publish, commit, cleanup +# callbacks: +# +############################################################################## + +function cleanup() { + echo "Cleanup" + builder_cleanup +} diff --git a/regedit_icon__scalable__by_lopagof.png.sha1sum b/regedit_icon__scalable__by_lopagof.png.sha1sum new file mode 100644 index 0000000..87ae0f9 --- /dev/null +++ b/regedit_icon__scalable__by_lopagof.png.sha1sum @@ -0,0 +1 @@ +fbd67e9c80802a0b0ff037a513409320607b50e7 /home/mario/.opsi-dist-cache/kliu.addpath-1.3.1//regedit_icon__scalable__by_lopagof.png