commit 44a24626124f5a484505d1c4d0f618d4f03823c9 Author: Mario Fetka Date: Fri Jul 15 22:23:51 2011 +0200 initial checkin diff --git a/CLIENT_DATA/setup.ins b/CLIENT_DATA/setup.ins new file mode 100644 index 0000000..352a227 --- /dev/null +++ b/CLIENT_DATA/setup.ins @@ -0,0 +1,218 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/credits/ + +[Actions] +requiredWinstVersion >= "4.10.8.6" + +DefVar $MsiId32$ +DefVar $UninstallProgram32$ +DefVar $MsiId64$ +DefVar $UninstallProgram64$ +DefVar $LogDir$ +DefVar $ProductId$ +DefVar $MinimumSpace$ +DefVar $InstallDir32$ +DefVar $InstallDir64$ +DefVar $ExitCode$ +DefVar $LicenseRequired$ +DefVar $LicenseKey$ +DefVar $LicensePool$ +DefVar $INST_SystemType$ +DefVar $INST_architecture$ + +Set $INST_SystemType$ = GetSystemType +set $INST_architecture$ = GetProductProperty("install_architecture","system specific") + + +Set $LogDir$ = "%SystemDrive%\tmp" + +; ---------------------------------------------------------------- +; - Please edit the following values - +; ---------------------------------------------------------------- +;$ProductId$ should be the name of the product in opsi +; therefore please: only lower letters, no umlauts, +; no white space use '-' as a seperator +Set $ProductId$ = "font-bitstream-vera" +Set $MinimumSpace$ = "10 MB" +; the path were we find the product after the installation +Set $InstallDir32$ = "%ProgramFiles32Dir%\Bitstream" +Set $InstallDir64$ = "%ProgramFiles64Dir%\Bitstream" +Set $LicenseRequired$ = "false" +Set $LicensePool$ = "p_" + $ProductId$ +; ---------------------------------------------------------------- + +if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$)) + LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$ + isFatalError + ; Stop process and set installation status to failed +else + comment "Show product picture" + ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ + + if FileExists("%ScriptPath%\delsub.ins") + comment "Start uninstall sub section" + Sub "%ScriptPath%\delsub.ins" + endif + + if $LicenseRequired$ = "true" + comment "Licensing required, reserve license and get license key" + Sub_get_licensekey + endif + + comment "installing" + + if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only") + Message "Installing " + $ProductId$ + " 32 Bit..." + comment "Start setup program" + Winbatch_install_32 + Sub_check_exitcode + comment "Copy files" + Files_install_32 /32Bit + comment "Patch Registry" + Registry_install /32Bit + comment "Create shortcuts" + LinkFolder_install + endif + + if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only")) + Message "Installing " + $ProductId$ + " 64 Bit..." + comment "Start setup program" + Winbatch_install_64 + Sub_check_exitcode + comment "Copy files" + Files_install_64 /64Bit + comment "Patch Registry" + Registry_install /64Bit + comment "Create shortcuts" + LinkFolder_install + endif + +endif + +[Winbatch_install_32] +"%ScriptPath%\files" & "FontReg32.exe /copy" + +[Files_install_32] +; Example of recursively copying some files into the installation directory: +; +; copy -s "%ScriptPath%\files\*.*" "$InstallDir32$" + +[Winbatch_install_64] +"%ScriptPath%\files" & "FontReg64.exe /copy" + +[Files_install_64] +; Example of recursively copying some files into the installation directory: +; +; copy -s "%ScriptPath%\files\*.*" "$InstallDir64$" + +[Registry_install] +; Example of setting some values of an registry key: +; +; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$] +; set "name1" = "some string value" +; set "name2" = REG_DWORD:0001 +; set "name3" = REG_BINARY:00 af 99 cd + +[LinkFolder_install] +; Example of deleting a folder from AllUsers startmenu: +; +; set_basefolder common_programs +; delete_subfolder $ProductId$ +; +; Example of creating an shortcut to the installed exe in AllUsers startmenu: +; +; set_basefolder common_programs +; set_subfolder $ProductId$ +; +; set_link +; name: $ProductId$ +; target: +; parameters: +; working_dir: $InstallDir$ +; icon_file: +; icon_index: +; end_link +; +; Example of creating an shortcut to the installed exe on AllUsers desktop: +; +; set_basefolder common_desktopdirectory +; set_subfolder "" +; +; set_link +; name: $ProductId$ +; target: +; parameters: +; working_dir: $InstallDir$ +; icon_file: +; icon_index: 2 +; end_link + +[Sub_get_licensekey] +if opsiLicenseManagementEnabled + comment "License management is enabled and will be used" + + comment "Trying to get a license key" + Set $LicenseKey$ = demandLicenseKey ($LicensePool$) + ; If there is an assignment of exactly one licensepool to the product the following call is possible: + ; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$) + ; + ; If there is an assignment of a license pool to a windows software id, it is possible to use: + ; DefVar $WindowsSoftwareId$ + ; $WindowsSoftwareId$ = "..." + ; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$) + + DefVar $ServiceErrorClass$ + set $ServiceErrorClass$ = getLastServiceErrorClass + comment "Error class: " + $ServiceErrorClass$ + + if $ServiceErrorClass$ = "None" + comment "Everything fine, we got the license key '" + $LicenseKey$ + "'" + else + if $ServiceErrorClass$ = "LicenseConfigurationError" + LogError "Fatal: license configuration must be corrected" + LogError getLastServiceErrorMessage + isFatalError + else + if $ServiceErrorClass$ = "LicenseMissingError" + LogError "Fatal: required license is not supplied" + isFatalError + endif + endif + endif +else + LogError "Fatal: license required, but license management not enabled" + isFatalError +endif + + +[Sub_check_exitcode] +comment "Test for installation success via exit code" +set $ExitCode$ = getLastExitCode +; informations to exit codes see +; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx +; http://msdn.microsoft.com/en-us/library/aa368542.aspx +if ($ExitCode$ = "0") + comment "Looks good: setup program gives exitcode zero" +else + comment "Setup program gives a exitcode unequal zero: " + $ExitCode$ + if ($ExitCode$ = "1605") + comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed." + comment "Uninstall of a not installed product failed - no problem" + else + if ($ExitCode$ = "1641") + comment "looks good: setup program gives exitcode 1641" + comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success." + else + if ($ExitCode$ = "3010") + comment "looks good: setup program gives exitcode 3010" + comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success." + else + logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$ + isFatalError + endif + endif + endif +endif + diff --git a/OPSI/changelog.txt b/OPSI/changelog.txt new file mode 100644 index 0000000..e69de29 diff --git a/OPSI/control b/OPSI/control new file mode 100644 index 0000000..eac604c --- /dev/null +++ b/OPSI/control @@ -0,0 +1,33 @@ +[Package] +version: RELEASE +depends: +incremental: False + +[Product] +type: localboot +id: font-bitstream-vera +name: Bitstream Vera Free Font +description: Bitstream Vera Free Font +advice: ADVICE +version: VERSION +priority: PRIOROTY + +licenseRequired: False +productClasses: +setupScript: setup.ins +uninstallScript: +updateScript: +alwaysScript: +onceScript: +customScript: +userLoginScript: + +[ProductProperty] +type: unicode +name: install_architecture +multivalue: False +editable: False +description: which architecture (32/64 bit) has to be installed +values: ["32 only", "64 only", "both", "system specific"] +default: ["system specific"] + diff --git a/OPSI/postinst b/OPSI/postinst new file mode 100644 index 0000000..a8e33fc --- /dev/null +++ b/OPSI/postinst @@ -0,0 +1,9 @@ +#! /bin/sh +# +# postinst script for softprod +# This script executes after unpacking files from that archive and registering the product at the server. +# +# The following environment variables can be used to obtain information about the current installation: +# PRODUCT_ID: id of the current product +# CLIENT_DATA_DIR: directory which contains the installed client data +# diff --git a/OPSI/preinst b/OPSI/preinst new file mode 100644 index 0000000..15a5320 --- /dev/null +++ b/OPSI/preinst @@ -0,0 +1,9 @@ +#! /bin/sh +# +# preinst script for softprod +# This script executes before that package will be unpacked from its archive file. +# +# The following environment variables can be used to obtain information about the current installation: +# PRODUCT_ID: id of the current product +# CLIENT_DATA_DIR: directory where client data will be installed +# diff --git a/bitstream-300x276.jpg.sha1sum b/bitstream-300x276.jpg.sha1sum new file mode 100644 index 0000000..d1054b2 --- /dev/null +++ b/bitstream-300x276.jpg.sha1sum @@ -0,0 +1 @@ +eac09355263e19d7b54e07ec47d7de1501274d9a /usr/portage/distfiles/bitstream-300x276.jpg diff --git a/build.sh b/build.sh new file mode 100644 index 0000000..a9b5437 --- /dev/null +++ b/build.sh @@ -0,0 +1,131 @@ +#!/bin/sh +PN="font-bitstream-vera" +VERSION="1.10" +RELEASE="1" +PRIORITY="0" +ADVICE="" +TYPE="restrict" +# all downloads should not have any traling parameters like ?downlaodid=1234 .....(should rewrite in python) +ICON="http://bostinnovation.com/wp-content/uploads/2011/05/bitstream-300x276.jpg" +X86="http://code.kliu.org/misc/fontreg/fontreg-2.1.3-redist.7z" +X86_1="http://ftp.gnome.org/pub/GNOME/sources/ttf-bitstream-vera/1.10/ttf-bitstream-vera-1.10.zip" +#AMD64="http://downloads.sourceforge.net/sevenzip/7z920-x64.msi" +ICONFILE=${ICON##*/} +X86FILE=${X86##*/} +X86FILE_1=${X86_1##*/} +#AMD64FILE=${AMD64##*/} + + if [ -e /var/tmp/opsi/upload/$TYPE/${PN}_${VERSION}-${RELEASE}.opsi ] + then + echo "package ${PN}_${VERSION}-${RELEASE}.opsi already generated" + exit 1 + fi + +OUT=$(mktemp -d /tmp/output.XXXXXXXXXX) || { echo "Failed to create temp dir"; exit 1; } +mkdir $OUT/$PN +cp -Rv OPSI CLIENT_DATA $OUT/$PN +unix2dos $OUT/$PN/CLIENT_DATA/* + + if [ -e /usr/portage/distfiles/$ICONFILE ] + then + if [ -e $ICONFILE.sha1sum ] + then + SHA1SUM=`cat $ICONFILE.sha1sum` + CHECKSUM=`sha1sum /usr/portage/distfiles/$ICONFILE` + if [ "$CHECKSUM" = "$SHA1SUM" ] + then + convert -colorspace rgb /usr/portage/distfiles/$ICONFILE -transparent white -background transparent -resize 160x160\> \ + -size 160x160 xc:transparent +swap -gravity center -composite $OUT/$PN/CLIENT_DATA/$PN.png + else + echo "The checksums do not match." + exit 1 + fi + else + echo "You need to create the checksums with: sha1sum /usr/portage/distfiles/$ICONFILE > $ICONFILE.sha1sum" + exit 1 + fi + else + echo "Downloading file" + wget -P /usr/portage/distfiles/ $ICON + exit 1 + fi + + if [ -e /usr/portage/distfiles/$X86FILE ] + then + if [ -e $X86FILE.sha1sum ] + then + SHA1SUM=`cat $X86FILE.sha1sum` + CHECKSUM=`sha1sum /usr/portage/distfiles/$X86FILE` + if [ "$CHECKSUM" = "$SHA1SUM" ] + then + mkdir -p $OUT/$PN/CLIENT_DATA/files + #cp /usr/portage/distfiles/$X86FILE $OUT/$PN/CLIENT_DATA/files + 7z x -o$OUT/$PN/CLIENT_DATA/files /usr/portage/distfiles/$X86FILE + cp $OUT/$PN/CLIENT_DATA/files/bin.x86-32/FontReg.exe $OUT/$PN/CLIENT_DATA/files/FontReg32.exe + cp $OUT/$PN/CLIENT_DATA/files/bin.x86-64/FontReg.exe $OUT/$PN/CLIENT_DATA/files/FontReg64.exe + else + echo "The checksums do not match." + exit 1 + fi + else + echo "You need to create the checksums with: sha1sum /usr/portage/distfiles/$X86FILE > $X86FILE.sha1sum" + exit 1 + fi + else + echo "Downloading file" + wget -O /usr/portage/distfiles/$X86FILE $X86 + #plowdown -o /usr/portage/distfiles $X86 + exit 1 + fi + + if [ -e /usr/portage/distfiles/$X86FILE_1 ] + then + if [ -e $X86FILE_1.sha1sum ] + then + SHA1SUM=`cat $X86FILE_1.sha1sum` + CHECKSUM=`sha1sum /usr/portage/distfiles/$X86FILE_1` + if [ "$CHECKSUM" = "$SHA1SUM" ] + then + #cp /usr/portage/distfiles/$X86FILE $OUT/$PN/CLIENT_DATA + #mkdir -p $OUT/$PN/CLIENT_DATA/files + 7z e -o$OUT/$PN/CLIENT_DATA/files /usr/portage/distfiles/$X86FILE_1 + else + echo "The checksums do not match." + exit 1 + fi + else + echo "You need to create the checksums with: sha1sum /usr/portage/distfiles/$X86FILE_1 > $X86FILE_1.sha1sum" + exit 1 + fi + else + echo "Downloading file" + wget -O /usr/portage/distfiles/$X86FILE_1 $X86_1 + #plowdown -o /usr/portage/distfiles $X86 + exit 1 + fi + +sed -e "s!VERSION!$VERSION!g" -e "s!RELEASE!$RELEASE!g" -e "s!PRIORITY!$PRIORITY!g" -e "s!ADVICE!$ADVICE!g" -i $OUT/$PN/OPSI/control +#sed -e "s!X86FILE!$X86FILE!g" -e "s!AMD64FILE!$AMD64FILE!g" -i $OUT/$PN/CLIENT_DATA/setup.ins +sed -e "s!X86FILE!$X86FILE!g" -i $OUT/$PN/CLIENT_DATA/setup32.ins + +if test -d ".git"; then + git log --date-order --date=short | \ + sed -e '/^commit.*$/d' | \ + awk '/^Author/ {sub(/\\$/,""); getline t; print $0 t; next}; 1' | \ + sed -e 's/^Author: //g' | \ + sed -e 's/>Date: \([0-9]*-[0-9]*-[0-9]*\)/>\t\1/g' | \ + sed -e 's/^\(.*\) \(\)\t\(.*\)/\3 \1 \2/g' > $OUT/$PN/OPSI/changelog.txt +else + echo "No git repository present." + exit 1 +fi + +pushd $OUT +opsi-makeproductfile -v $OUT/$PN +popd + +mkdir -p /var/tmp/opsi/upload/$TYPE/ +cp -afv $OUT/*.opsi /var/tmp/opsi/upload/$TYPE/ + +#rm -rf $OUT + diff --git a/fontreg-2.1.3-redist.7z.sha1sum b/fontreg-2.1.3-redist.7z.sha1sum new file mode 100644 index 0000000..f18dbe6 --- /dev/null +++ b/fontreg-2.1.3-redist.7z.sha1sum @@ -0,0 +1 @@ +a7ded5853f8ea326e944fa111ab15da0fec4c023 /usr/portage/distfiles/fontreg-2.1.3-redist.7z diff --git a/ttf-bitstream-vera-1.10.zip.sha1sum b/ttf-bitstream-vera-1.10.zip.sha1sum new file mode 100644 index 0000000..263c5f1 --- /dev/null +++ b/ttf-bitstream-vera-1.10.zip.sha1sum @@ -0,0 +1 @@ +dce5955adcdbb86dd78325ad5340d58109483a1e /usr/portage/distfiles/ttf-bitstream-vera-1.10.zip