commit 549aae71e27cb7ac1ee0da08af516abd7b266e2c Author: Mario Fetka Date: Thu Jan 24 13:45:55 2013 +0100 Initial commit diff --git a/CLIENT_DATA/delsub32.ins b/CLIENT_DATA/delsub32.ins new file mode 100644 index 0000000..0f955e8 --- /dev/null +++ b/CLIENT_DATA/delsub32.ins @@ -0,0 +1,106 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib gmbh +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/credits/ + + +Set $UninstallProgram$ = $InstallDir$ + "\uninstall.exe" +Set $IniFile$ = $InstallDir$ + "\opsi-" + $ProductId$ + ".ini" + +Message "Uninstalling " + $ProductId$ + " ..." + +if FileExists($IniFile$) + Set $MsiIdOld$ = GetValueFromInifile($IniFile$,"X86","MsiId","{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}") + if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiIdOld$ + "] DisplayName") = "") + comment "Old MSI id " + $MsiIdOld$ + " found in registry, starting msiexec to uninstall old version" + Winbatch_uninstall_msi_old + sub_check_exitcode + endif +endif +if FileExists($UninstallProgram$) + comment "Uninstall program found, starting uninstall" + Winbatch_uninstall + sub_check_exitcode +endif +if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId$ + "] DisplayName") = "") + comment "MSI id " + $MsiId$ + " found in registry, starting msiexec to uninstall" + Winbatch_uninstall_msi + sub_check_exitcode +endif + +comment "Delete files" +Files_uninstall /32Bit + +comment "Cleanup registry" +Registry_uninstall /32Bit + +comment "Delete program shortcuts" +LinkFolder_uninstall + +[Winbatch_uninstall] +; Choose one of the following examples as basis for program uninstall +; +; === Nullsoft Scriptable Install System ================================================================ +; "$UninstallProgram$" /S +; +; === Inno Setup ======================================================================================== +; "$UninstallProgram$" /silent /norestart /SUPPRESSMSGBOXES + + +[Winbatch_uninstall_msi_old] +msiexec /x $MsiIdOld$ /qb! REBOOT=ReallySuppress + +[Winbatch_uninstall_msi] +msiexec /x $MsiId$ /qb! REBOOT=ReallySuppress + +[Files_uninstall] +; Example for recursively deleting the installation directory (don't forget the trailing backslash): +; +; delete -sf "$InstallDir$\" + +[Registry_uninstall] +; Example of deleting a registry key: +; +; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$] + +[LinkFolder_uninstall] +; Example of deleting a folder from AllUsers startmenu: +; +; set_basefolder common_programs +; delete_subfolder $ProductId$ +; +; Example of deleting a shortcut from AllUsers desktop: +; +; set_basefolder common_desktopdirectory +; set_subfolder "" +; delete_element $ProductId$ + +[Sub_check_exitcode] +comment "Test for installation success via exit code" +set $ExitCode$ = getLastExitCode +; informations to exit codes see +; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx +; http://msdn.microsoft.com/en-us/library/aa368542.aspx +if ($ExitCode$ = "0") + comment "Looks good: setup program gives exitcode zero" +else + comment "Setup program gives a exitcode unequal zero: " + $ExitCode$ + if ($ExitCode$ = "1605") + comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed." + comment "Uninstall of a not installed product failed - no problem" + else + if ($ExitCode$ = "1641") + comment "looks good: setup program gives exitcode 1641" + comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success." + else + if ($ExitCode$ = "3010") + comment "looks good: setup program gives exitcode 3010" + comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success." + else + logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$ + isFatalError + endif + endif + endif +endif + diff --git a/CLIENT_DATA/opsi-emclient.emclient.ini b/CLIENT_DATA/opsi-emclient.emclient.ini new file mode 100644 index 0000000..1a52494 --- /dev/null +++ b/CLIENT_DATA/opsi-emclient.emclient.ini @@ -0,0 +1,7 @@ +[X86] +MsiId={C0BF25BA-276A-4385-BD61-99B763B714D7} + + +[COMMON] +PN=emclient.emclient +VERSION=5 diff --git a/CLIENT_DATA/setup32.ins b/CLIENT_DATA/setup32.ins new file mode 100644 index 0000000..ff57540 --- /dev/null +++ b/CLIENT_DATA/setup32.ins @@ -0,0 +1,215 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/credits/ + +[Actions] +requiredWinstVersion >= "4.10.8.6" + +; DefVar $MsiId$ +DefVar $MsiIdOld$ +DefVar $UninstallProgram$ +DefVar $IniFile$ +DefVar $IniCfgFile$ +DefVar $LogDir$ +DefVar $ProductId$ +DefVar $MinimumSpace$ +DefVar $InstallDir$ +DefVar $ExitCode$ +DefVar $LicenseRequired$ +DefVar $LicenseKey$ +DefVar $LicensePool$ + +Set $LogDir$ = "%SystemDrive%\tmp" + +; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh +; and adds the following variables: +; from builder-product.cfg : all variables definded by attribute WINST[index] +; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE +; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL +; auto generated winst-variables +; $IconFile$: path to product picture +; +@@BUILDER_VARIABLES@@ + +; ---------------------------------------------------------------- +; - Please edit the following values - +; ---------------------------------------------------------------- +;$ProductId$ should be the name of the product in opsi +; therefore please: only lower letters, no umlauts, +; no white space use '-' as a seperator +Set $ProductId$ = "emclient.emclient" +Set $MinimumSpace$ = "50 MB" +; the path were we find the product after the installation +Set $InstallDir$ = "%ProgramFiles32Dir%\eMClient" +Set $IniCfgFile$ = "%ScriptPath%\opsi-" + $ProductId$ + ".ini" +Set $LicenseRequired$ = "false" +Set $LicensePool$ = "p_" + $ProductId$ +; ---------------------------------------------------------------- + +if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$)) + LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$ + isFatalError + ; Stop process and set installation status to failed +else + comment "Show product picture" + ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ + + if FileExists("%ScriptPath%\delsub32.ins") + comment "Start uninstall sub section" + Sub "%ScriptPath%\delsub32.ins" + endif + + Message "Installing " + $ProductId$ + " ..." + + if $LicenseRequired$ = "true" + comment "Licensing required, reserve license and get license key" + Sub_get_licensekey + endif + + comment "Start setup program" + Winbatch_install + Sub_check_exitcode + + comment "Copy files" + Files_install /32Bit + + comment "Patch Registry" + Registry_install /32Bit + + comment "Create shortcuts" + LinkFolder_install + + comment "Test for installation success" + ; Test if software marked as installed in registry + ; if (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}] DisplayName") = "") + ; logError "Fatal: After Installation 32 bit [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}] not found" + ; isFatalError + ; else + ; comment "Successful Installation" + ; endif + +endif + +[Winbatch_install] +; === MSI package ======================================================================================= +; You may use the parameter PIDKEY=$Licensekey$ +msiexec /i $InstallMsi$ /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=2 REBOOT=ReallySuppress + +[Files_install] +; copy the ini file to the InstallDir +copy "$IniCfgFile$" "$InstallDir$" + +; Example of recursively copying some files into the installation directory: +; +; copy -s "%ScriptPath%\files\*.*" "$InstallDir$" + +[Registry_install] +; Example of setting some values of an registry key: +; +; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$] +; set "name1" = "some string value" +; set "name2" = REG_DWORD:0001 +; set "name3" = REG_BINARY:00 af 99 cd + +[LinkFolder_install] +; Example of deleting a folder from AllUsers startmenu: +; +; set_basefolder common_programs +; delete_subfolder $ProductId$ +; +; Example of creating an shortcut to the installed exe in AllUsers startmenu: +; +; set_basefolder common_programs +; set_subfolder $ProductId$ +; +; set_link +; name: $ProductId$ +; target: +; parameters: +; working_dir: $InstallDir$ +; icon_file: +; icon_index: +; end_link +; +; Example of creating an shortcut to the installed exe on AllUsers desktop: +; +; set_basefolder common_desktopdirectory +; set_subfolder "" +; +; set_link +; name: $ProductId$ +; target: +; parameters: +; working_dir: $InstallDir$ +; icon_file: +; icon_index: 2 +; end_link + +[Sub_get_licensekey] +if opsiLicenseManagementEnabled + comment "License management is enabled and will be used" + + comment "Trying to get a license key" + Set $LicenseKey$ = demandLicenseKey ($LicensePool$) + ; If there is an assignment of exactly one licensepool to the product the following call is possible: + ; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$) + ; + ; If there is an assignment of a license pool to a windows software id, it is possible to use: + ; DefVar $WindowsSoftwareId$ + ; $WindowsSoftwareId$ = "..." + ; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$) + + DefVar $ServiceErrorClass$ + set $ServiceErrorClass$ = getLastServiceErrorClass + comment "Error class: " + $ServiceErrorClass$ + + if $ServiceErrorClass$ = "None" + comment "Everything fine, we got the license key '" + $LicenseKey$ + "'" + else + if $ServiceErrorClass$ = "LicenseConfigurationError" + LogError "Fatal: license configuration must be corrected" + LogError getLastServiceErrorMessage + isFatalError + else + if $ServiceErrorClass$ = "LicenseMissingError" + LogError "Fatal: required license is not supplied" + isFatalError + endif + endif + endif +else + LogError "Fatal: license required, but license management not enabled" + isFatalError +endif + + +[Sub_check_exitcode] +comment "Test for installation success via exit code" +set $ExitCode$ = getLastExitCode +; informations to exit codes see +; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx +; http://msdn.microsoft.com/en-us/library/aa368542.aspx +if ($ExitCode$ = "0") + comment "Looks good: setup program gives exitcode zero" +else + comment "Setup program gives a exitcode unequal zero: " + $ExitCode$ + if ($ExitCode$ = "1605") + comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed." + comment "Uninstall of a not installed product failed - no problem" + else + if ($ExitCode$ = "1641") + comment "looks good: setup program gives exitcode 1641" + comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success." + else + if ($ExitCode$ = "3010") + comment "looks good: setup program gives exitcode 3010" + comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success." + else + logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$ + isFatalError + endif + endif + endif +endif + diff --git a/CLIENT_DATA/uninstall32.ins b/CLIENT_DATA/uninstall32.ins new file mode 100644 index 0000000..e9f0aa4 --- /dev/null +++ b/CLIENT_DATA/uninstall32.ins @@ -0,0 +1,71 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib gmbh +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/credits/ + +[Actions] +requiredWinstVersion >= "4.10.8.6" + +; DefVar $MsiId$ +DefVar $MsiIdOld$ +DefVar $UninstallProgram$ +DefVar $LogDir$ +DefVar $IniFile$ +DefVar $IniCfgFile$ +DefVar $ExitCode$ +DefVar $ProductId$ +DefVar $InstallDir$ +DefVar $LicenseRequired$ +DefVar $LicensePool$ + +Set $LogDir$ = "%SystemDrive%\tmp" + +; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh +; and adds the following variables: +; from builder-product.cfg : all variables definded by attribute WINST[index] +; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE +; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL +; auto generated winst-variables +; $IconFile$: path to product picture +; +@@BUILDER_VARIABLES@@ + +; ---------------------------------------------------------------- +; - Please edit the following values - +; ---------------------------------------------------------------- +Set $ProductId$ = "emclient.emclient" +Set $InstallDir$ = "%ProgramFiles32Dir%\eMClient" +Set $LicenseRequired$ = "false" +Set $LicensePool$ = "p_" + $ProductId$ +; ---------------------------------------------------------------- + + +comment "Show product picture" +ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ + +Message "Uninstalling " + $ProductId$ + " ..." + +if FileExists("%ScriptPath%\delsub32.ins") + comment "Start uninstall sub section" + Sub "%ScriptPath%\delsub32.ins" +endif + +if $LicenseRequired$ = "true" + comment "Licensing required, free license used" + Sub_free_license +endif + +[Sub_free_license] +comment "License management is enabled and will be used" + +comment "Trying to free license used for the product" +DefVar $result$ +Set $result$ = FreeLicense($LicensePool$) +; If there is an assignment of a license pool to the product, it is possible to use +; Set $result$ = FreeLicense("", $ProductId$) +; +; If there is an assignment of a license pool to a windows software id, it is possible to use +; DefVar $WindowsSoftwareId$ +; $WindowsSoftwareId$ = "..." +; set $result$ = FreeLicense("", "", $WindowsSoftwareId$) + diff --git a/OPSI/changelog.txt b/OPSI/changelog.txt new file mode 100644 index 0000000..bc69317 --- /dev/null +++ b/OPSI/changelog.txt @@ -0,0 +1,2 @@ +Don't add cahngelog entries here! +It get autogenerated by the opsi-builder.sh \ No newline at end of file diff --git a/OPSI/control b/OPSI/control new file mode 100644 index 0000000..2604cf3 --- /dev/null +++ b/OPSI/control @@ -0,0 +1,37 @@ +[Package] +version: RELEASE +depends: +incremental: False + +[Product] +type: localboot +id: emclient.emclient +name: emclient.emclient +description: emclient +advice: ADVICE +version: VERSION +priority: PRIORITY +licenseRequired: False +productClasses: +setupScript: setup32.ins +uninstallScript: uninstall32.ins +updateScript: +alwaysScript: +onceScript: +customScript: +userLoginScript: + +[ProductProperty] +type: unicode +name: install_architecture +multivalue: False +editable: False +description: which architecture (32/64 bit) has to be installed +values: ["32 only", "64 only", "both", "system specific"] +default: ["system specific"] + +[ProductDependency] +action: setup +requiredProduct: sereby.aio +requiredStatus: installed +requirementType: before diff --git a/OPSI/postinst b/OPSI/postinst new file mode 100644 index 0000000..a8e33fc --- /dev/null +++ b/OPSI/postinst @@ -0,0 +1,9 @@ +#! /bin/sh +# +# postinst script for softprod +# This script executes after unpacking files from that archive and registering the product at the server. +# +# The following environment variables can be used to obtain information about the current installation: +# PRODUCT_ID: id of the current product +# CLIENT_DATA_DIR: directory which contains the installed client data +# diff --git a/OPSI/preinst b/OPSI/preinst new file mode 100644 index 0000000..15a5320 --- /dev/null +++ b/OPSI/preinst @@ -0,0 +1,9 @@ +#! /bin/sh +# +# preinst script for softprod +# This script executes before that package will be unpacked from its archive file. +# +# The following environment variables can be used to obtain information about the current installation: +# PRODUCT_ID: id of the current product +# CLIENT_DATA_DIR: directory where client data will be installed +# diff --git a/Testing.txt b/Testing.txt new file mode 100644 index 0000000..d6b5e6c --- /dev/null +++ b/Testing.txt @@ -0,0 +1,28 @@ +*** Qualitiymanagement/Testing procedure + +- Product: + - Name: productname + - Version: xxx + - Release: yyyy + +- Environment + - OS: Native windows XP-32Bit installation + - Preinstalled packages: None (also no aio) + - Files used while testing: + File1: http://domain.de/file.ext + +- Testing process: + OPSI-action: + - Installation (without dependencies like AIO/Firefox): ?? + Result: + - File extensions related to program: ?? + - Start menu entry: ?? + - Starting/using program: viewer works, File1 is shown correctly: ?? + + OPSI-action: + - Uninstall + Result: + - File extensions related to program: unrelated: ?? + - Start menu entry: none: ?? + + diff --git a/builder-product.cfg b/builder-product.cfg new file mode 100644 index 0000000..777a15c --- /dev/null +++ b/builder-product.cfg @@ -0,0 +1,29 @@ +############################ +# Setup product information +############################ +VENDOR="emclient.com" +PN="emclient.emclient" +VERSION="5" +RELEASE="3" +PRIORITY="0" +ADVICE="" + +# TYPE - defines, if the install files are public or restricted. +# Valid value: restricted | public +TYPE="public" + + +DL_FILE[0]="emclient_logo.png" +DL_SOURCE[0]="http://www.emclient.com/img/logos/512.png" + +DL_FILE[1]="setup-$VERSION.msi" +DL_SOURCE[1]="http://www.emclient.com/dist/latest/setup.msi" +DL_ARCH[1]="X86" +DL_WINST_NAME[1]=InstallMsi + +# File array index for the image showing while installing the program +ICON_DL_INDEX=0 + +WINST_NAME[0]="MsiId" +WINST_VALUE[0]="{C0BF25BA-276A-4385-BD61-99B763B714D7}" + diff --git a/builder-targets-cb.sh b/builder-targets-cb.sh new file mode 100644 index 0000000..9a3d4a8 --- /dev/null +++ b/builder-targets-cb.sh @@ -0,0 +1,25 @@ +############################################################################## +# This optional file "builder-targets-cb.sh" will be called by builder.sh +# +# The targets will be called from thde opsi-builder using the following +# order: config, prepare, retrieve, create, package, publish, commit, cleanup +# You can overwrite the target functions in builder-targets-cb.sh +# +# You can define callback functions. The functions are called from +# opsi-builder within processing a target +# cb_package_makeproductfile +# +# You can use every variable defined in any configuration file or by +# the defined builder script itself. Also, calling the predefined +# targets builder_ is possible. +# +# Abstract: +# target order: config, prepare, retrieve, create, package, publish, commit, cleanup +# callbacks: +# +############################################################################## + +function cleanup() { + echo "Cleanup" + builder_cleanup +} diff --git a/emclient_logo.png.sha1sum b/emclient_logo.png.sha1sum new file mode 100644 index 0000000..6d681b2 --- /dev/null +++ b/emclient_logo.png.sha1sum @@ -0,0 +1 @@ +bd90007551bcdf776d93664a3da92d8ee282c5e4 /home/mario/.opsi-dist-cache/emclient.emclient-5//emclient_logo.png diff --git a/setup-5.msi.sha1sum b/setup-5.msi.sha1sum new file mode 100644 index 0000000..f51c4ee --- /dev/null +++ b/setup-5.msi.sha1sum @@ -0,0 +1 @@ +ccdeb91cc06c124f1ff3d618594e263b04808664 /home/mario/.opsi-dist-cache/emclient.emclient-5/X86/setup-5.msi