2013-03-01 18:49:03 +01:00
; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/credits/
[Actions]
requiredWinstVersion >= "4.10.8.6"
; DefVar $MsiId32$
DefVar $MsiIdOld32$
DefVar $UninstallProgram32$
DefVar $IniFile32$
; DefVar $MsiId64$
DefVar $MsiIdOld64$
DefVar $UninstallProgram64$
DefVar $IniFile64$
DefVar $IniCfgFile$
DefVar $LogDir$
DefVar $ProductId$
DefVar $MinimumSpace$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $ExitCode$
DefVar $LicenseRequired$
DefVar $LicenseKey$
DefVar $LicensePool$
DefVar $INST_SystemType$
DefVar $INST_architecture$
Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
Set $LogDir$ = "%SystemDrive%\tmp"
; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh
; and adds the following variables:
; from builder-product.cfg : all variables definded by attribute WINST[index]
; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE
; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL
; auto generated winst-variables
; $IconFile$: path to product picture
;
@@BUILDER_VARIABLES@@
; ----------------------------------------------------------------
; - Please edit the following values -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts,
; no white space use '-' as a seperator
2013-03-02 06:16:34 +01:00
Set $ProductId$ = "adiaproject.dia.winxp"
2013-03-01 18:49:03 +01:00
Set $MinimumSpace$ = "100 MB"
; the path were we find the product after the installation
Set $InstallDir32$ = "%ProgramFiles32Dir%\Adia Project\Driver Installer Assistant"
Set $InstallDir64$ = "%ProgramFiles64Dir%\Adia Project\Driver Installer Assistant"
Set $IniCfgFile$ = "%ScriptPath%\opsi-" + $ProductId$ + ".ini"
Set $LicenseRequired$ = "false"
Set $LicensePool$ = "p_" + $ProductId$
; ----------------------------------------------------------------
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
isFatalError
; Stop process and set installation status to failed
else
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
if FileExists("%ScriptPath%\delsub3264.ins")
comment "Start uninstall sub section"
Sub "%ScriptPath%\delsub3264.ins"
endif
if $LicenseRequired$ = "true"
comment "Licensing required, reserve license and get license key"
Sub_get_licensekey
endif
comment "installing"
if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
Message "Installing " + $ProductId$ + " 32 Bit..."
comment "Start setup program"
Winbatch_install_32
Sub_check_exitcode
comment "Copy files"
Files_install_32 /32Bit
comment "Patch Registry"
Registry_install /32Bit
comment "Create shortcuts"
LinkFolder_install
endif
if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
Message "Installing " + $ProductId$ + " 64 Bit..."
comment "Start setup program"
Winbatch_install_64
Sub_check_exitcode
comment "Copy files"
Files_install_64 /64Bit
comment "Patch Registry"
Registry_install /64Bit
comment "Create shortcuts"
LinkFolder_install
endif
endif
[Winbatch_install_32]
; Choose one of the following examples as basis for your installation
; You can use $LicenseKey$ var to pass a license key to the installer
;
; === Nullsoft Scriptable Install System ================================================================
; "%ScriptPath%\Setup.exe" /S
;
; === MSI package =======================================================================================
; You may use the parameter PIDKEY=$Licensekey$
; msiexec /i "%ScriptPath%\some.msi" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=2 REBOOT=ReallySuppress
;
; === InstallShield + MSI=====================================================================================
; Attention: The path to the log file should not contain any whitespaces
; "%ScriptPath%\setup.exe" /s /v" /l* $LogDir$\$ProductId$.install_log.txt /qb! ALLUSERS=2 REBOOT=ReallySuppress"
; "%ScriptPath%\setup.exe" /s /v" /qb! ALLUSERS=2 REBOOT=ReallySuppress"
;
; === InstallShield =====================================================================================
; Create setup.iss answer file by running: setup.exe /r /f1"c:\setup.iss"
; "%ScriptPath%\setup.exe" /s /sms /f1"%ScriptPath%\setup.iss" /f2"$LogDir$\$ProductId$.install_log.txt"
;
; === Inno Setup ========================================================================================
; http://unattended.sourceforge.net/InnoSetup_Switches_ExitCodes.html
; You may create setup answer file by: setup.exe /SAVEINF="filename"
; You may use an answer file by the parameter /LOADINF="filename"
; "%ScriptPath%\setup.exe" /sp- /silent /norestart /SUPPRESSMSGBOXES
; "$Install32Exe$" -t10
[Files_install_32]
copy "$IniCfgFile$" "$InstallDir32$"
; Example of recursively copying some files into the installation directory:
;
; copy -s "%ScriptPath%\files\*.*" "$InstallDir32$"
[Winbatch_install_64]
; Choose one of the following examples as basis for your installation
; You can use $LicenseKey$ var to pass a license key to the installer
;
; === Nullsoft Scriptable Install System ================================================================
; "%ScriptPath%\Setup.exe" /S
;
; === MSI package =======================================================================================
; You may use the parameter PIDKEY=$Licensekey$
; msiexec /i "%ScriptPath%\some.msi" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=2 REBOOT=ReallySuppress
;
; === InstallShield + MSI=====================================================================================
; Attention: The path to the log file should not contain any whitespaces
; "%ScriptPath%\setup.exe" /s /v" /l* $LogDir$\$ProductId$.install_log.txt /qb! ALLUSERS=2 REBOOT=ReallySuppress"
; "%ScriptPath%\setup.exe" /s /v" /qb! ALLUSERS=2 REBOOT=ReallySuppress"
;
; === InstallShield =====================================================================================
; Create setup.iss answer file by running: setup.exe /r /f1"c:\setup.iss"
; "%ScriptPath%\setup.exe" /s /sms /f1"%ScriptPath%\setup.iss" /f2"$LogDir$\$ProductId$.install_log.txt"
;
; === Inno Setup ========================================================================================
; http://unattended.sourceforge.net/InnoSetup_Switches_ExitCodes.html
; You may create setup answer file by: setup.exe /SAVEINF="filename"
; You may use an answer file by the parameter /LOADINF="filename"
; "%ScriptPath%\setup.exe" /sp- /silent /norestart /SUPPRESSMSGBOXES
; "$Install64Exe$" -t10
[Files_install_64]
copy "$IniCfgFile$" "$InstallDir64$"
; Example of recursively copying some files into the installation directory:
;
; copy -s "%ScriptPath%\files\*.*" "$InstallDir64$"
[Registry_install]
; Example of setting some values of an registry key:
;
; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
; set "name1" = "some string value"
; set "name2" = REG_DWORD:0001
; set "name3" = REG_BINARY:00 af 99 cd
[LinkFolder_install]
; Example of deleting a folder from AllUsers startmenu:
;
; set_basefolder common_programs
; delete_subfolder $ProductId$
;
; Example of creating an shortcut to the installed exe in AllUsers startmenu:
;
; set_basefolder common_programs
; set_subfolder $ProductId$
;
; set_link
; name: $ProductId$
; target: <path to the program>
; parameters:
; working_dir: $InstallDir$
; icon_file:
; icon_index:
; end_link
;
; Example of creating an shortcut to the installed exe on AllUsers desktop:
;
; set_basefolder common_desktopdirectory
; set_subfolder ""
;
; set_link
; name: $ProductId$
; target: <path to the program>
; parameters: <some_param>
; working_dir: $InstallDir$
; icon_file: <path to icon file>
; icon_index: 2
; end_link
[Sub_get_licensekey]
comment "License management is enabled and will be used"
comment "Trying to get a license key"
Set $LicenseKey$ = demandLicenseKey ($LicensePool$)
; If there is an assignment of exactly one licensepool to the product the following call is possible:
; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$)
;
; If there is an assignment of a license pool to a windows software id, it is possible to use:
; DefVar $WindowsSoftwareId$
; $WindowsSoftwareId$ = "..."
; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$)
DefVar $ServiceErrorClass$
set $ServiceErrorClass$ = getLastServiceErrorClass
comment "Error class: " + $ServiceErrorClass$
if $ServiceErrorClass$ = "None"
comment "Everything fine, we got the license key '" + $LicenseKey$ + "'"
else
if $ServiceErrorClass$ = "LicenseConfigurationError"
LogError "Fatal: license configuration must be corrected"
LogError getLastServiceErrorMessage
isFatalError
else
if $ServiceErrorClass$ = "LicenseMissingError"
LogError "Fatal: required license is not supplied"
isFatalError
endif
endif
endif
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
comment "Looks good: setup program gives exitcode zero"
else
comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
if ($ExitCode$ = "1605")
comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed."
comment "Uninstall of a not installed product failed - no problem"
else
if ($ExitCode$ = "1641")
comment "looks good: setup program gives exitcode 1641"
comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
else
if ($ExitCode$ = "3010")
comment "looks good: setup program gives exitcode 3010"
comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success."
else
logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
isFatalError
endif
endif
endif
endif
