diff --git a/0 b/0
new file mode 100644
index 0000000..e69de29
diff --git a/CLIENT_DATA/#setup3264.ins# b/CLIENT_DATA/#setup3264.ins#
new file mode 100644
index 0000000..7c8f557
--- /dev/null
+++ b/CLIENT_DATA/#setup3264.ins#
@@ -0,0 +1,89 @@
+; Copyright (c) uib gmbh (www.uib.de)
+; This sourcecode is owned by uib
+; and published under the Terms of the General Public License.
+; credits: http://www.opsi.org/credits/
+
+[Actions]
+requiredWinstVersion >= "4.10.8.6"
+
+DefVar $MsiId$
+DefVar $LogDir$
+DefVar $ProductId$  
+DefVar $MinimumSpace$
+DefVar $InstallDir$
+DefVar $ExitCode$
+
+Set $LogDir$ = "%SystemDrive%\tmp"
+
+; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh
+; and adds the following variables:
+;   from builder-product.cfg :  all variables definded by attribute WINST[index]
+;   from builder-product.cfg :  VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE   
+;   from opsi-builder.cfg    :  CREATOR_TAG CREATOR_NAME CREATOR_EMAIL           
+;   auto generated winst-variables
+;         $IconFile$: path to product picture
+;
+@@BUILDER_VARIABLES@@
+
+; ----------------------------------------------------------------
+; - Please edit the following values                             -
+; ----------------------------------------------------------------
+;$ProductId$ should be the name of the product in opsi
+; therefore please: only lower letters, no umlauts, 
+; no white space use '-' as a seperator
+Set $ProductId$       = "brother7360"
+Set $MinimumSpace$    = "150 MB"
+; the path were we find the product after the installation
+Set $InstallDir$      = "%SystemDrive%\Windows\inf"
+; ----------------------------------------------------------------
+
+if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
+	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
+	isFatalError
+	; Stop process and set installation status to failed
+else
+	comment "Show product picture"
+	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
+	
+	if FileExists("%ScriptPath%\delsub32.ins")
+		comment "Start uninstall sub section"
+		Sub "%ScriptPath%\delsub32.ins"
+	endif
+	
+	Message "Installing " + $ProductId$ + " ..."
+                	
+	comment "Copy files"
+	Files_install /32Bit
+	
+	comment "Patch Registry"
+	Registry_install /32Bit
+	
+;	comment "Create shortcuts"
+;	LinkFolder_install
+
+        DosInAnIcon_Create
+	
+	comment "Test for installation success"
+	; Test if software marked as installed in registry
+	; if (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}] DisplayName") = "")
+	; 	logError "Fatal: After Installation 32 bit [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}] not found"
+	; 	isFatalError
+	; else
+	; 	comment "Successful Installation"
+	; endif
+endif
+
+[Files_install]
+;copy -s "%ScriptPath%\drv\*.*" "$InstallDir$\brother7360"
+copy -s "$Drv_Dir$32\*.*" "$InstallDir$\brother7360"
+
+[Registry_install]
+; Example of setting some values of an registry key:
+openkey [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion]
+set "DevicePath" = "%SystemRoot%\inf;%SystemRoot%\inf\brother7360"
+
+
+[DosInAnIcon_Create]
+rundll32 syssetup,SetupInfObjectInstallAction DefaultInstall 128 $InstallDir$\brother7360\brpom10a.inf
+rundll32 syssetup,SetupInfObjectInstallAction DefaultInstall 128 $InstallDir$\brother7360\brimm10a.inf
+rundll32 syssetup,SetupInfObjectInstallAction DefaultInstall 128 $InstallDir$\brother7360\BRPRM10A.INF
diff --git a/CLIENT_DATA/setup3264.ins b/CLIENT_DATA/setup3264.ins
new file mode 100644
index 0000000..f73501b
--- /dev/null
+++ b/CLIENT_DATA/setup3264.ins
@@ -0,0 +1,81 @@
+; Copyright (c) uib gmbh (www.uib.de)
+; This sourcecode is owned by uib
+; and published under the Terms of the General Public License.
+; credits: http://www.opsi.org/credits/
+
+[Actions]
+requiredWinstVersion >= "4.10.8.6"
+
+DefVar $MsiId$
+DefVar $LogDir$
+DefVar $ProductId$  
+DefVar $MinimumSpace$
+DefVar $InstallDir$
+DefVar $ExitCode$
+
+Set $LogDir$ = "%SystemDrive%\tmp"
+
+; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh
+; and adds the following variables:
+;   from builder-product.cfg :  all variables definded by attribute WINST[index]
+;   from builder-product.cfg :  VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE   
+;   from opsi-builder.cfg    :  CREATOR_TAG CREATOR_NAME CREATOR_EMAIL           
+;   auto generated winst-variables
+;         $IconFile$: path to product picture
+;
+@@BUILDER_VARIABLES@@
+
+; ----------------------------------------------------------------
+; - Please edit the following values                             -
+; ----------------------------------------------------------------
+;$ProductId$ should be the name of the product in opsi
+; therefore please: only lower letters, no umlauts, 
+; no white space use '-' as a seperator
+Set $ProductId$       = "brother7360"
+Set $MinimumSpace$    = "150 MB"
+; the path were we find the product after the installation
+Set $InstallDir$      = "%SystemDrive%\Windows\inf"
+; ----------------------------------------------------------------
+
+if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
+	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
+	isFatalError
+	; Stop process and set installation status to failed
+else
+	comment "Show product picture"
+	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
+	
+	if FileExists("%ScriptPath%\delsub32.ins")
+		comment "Start uninstall sub section"
+		Sub "%ScriptPath%\delsub32.ins"
+	endif
+	
+	Message "Installing " + $ProductId$ + " ..."
+                	
+	comment "Copy files"
+	Files_install /32Bit
+	
+	comment "Patch Registry"
+	Registry_install /32Bit
+	
+        DosInAnIcon_Create
+        
+        comment "Reboot"
+        ExitWindows /Reboot
+	
+endif
+
+[Files_install]
+;copy -s "%ScriptPath%\drv\*.*" "$InstallDir$\brother7360"
+copy -s "$Drv_Dir$32\*.*" "$InstallDir$\brother7360"
+
+[Registry_install]
+; Example of setting some values of an registry key:
+openkey [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion]
+set "DevicePath" = "%SystemRoot%\inf;$InstallDir$\brother7360"
+
+
+[DosInAnIcon_Create]
+rundll32 syssetup,SetupInfObjectInstallAction DefaultInstall 128 $InstallDir$\brother7360\brpom10a.inf
+rundll32 syssetup,SetupInfObjectInstallAction DefaultInstall 128 $InstallDir$\brother7360\brimm10a.inf
+rundll32 syssetup,SetupInfObjectInstallAction DefaultInstall 128 $InstallDir$\brother7360\BRPRM10A.INF
diff --git a/OPSI/changelog.txt b/OPSI/changelog.txt
new file mode 100644
index 0000000..bc69317
--- /dev/null
+++ b/OPSI/changelog.txt
@@ -0,0 +1,2 @@
+Don't add cahngelog entries here!
+It get autogenerated by the opsi-builder.sh
\ No newline at end of file
diff --git a/OPSI/control b/OPSI/control
new file mode 100644
index 0000000..1175ffb
--- /dev/null
+++ b/OPSI/control
@@ -0,0 +1,31 @@
+[Package]
+version: RELEASE
+depends:
+incremental: False
+
+[Product]
+type: localboot
+id: brother7360
+name: brother7360
+description: Brother 7360: Drucker und Scantreiber
+advice: ADVICE
+version: VERSION
+priority: PRIORITY
+licenseRequired: False
+productClasses:
+setupScript: setup3264.ins
+uninstallScript: uninstall3264.ins
+updateScript:
+alwaysScript:
+onceScript:
+customScript:
+userLoginScript:
+
+[ProductProperty]
+type: unicode
+name: install_architecture
+multivalue: False
+editable: False
+description: which architecture (32/64 bit) has to be installed
+values: ["32 only", "64 only", "both", "system specific"]
+default: ["system specific"]
diff --git a/OPSI/postinst b/OPSI/postinst
new file mode 100644
index 0000000..a8e33fc
--- /dev/null
+++ b/OPSI/postinst
@@ -0,0 +1,9 @@
+#! /bin/sh
+#
+# postinst script for softprod
+# This script executes after unpacking files from that archive and registering the product at the server.
+#
+# The following environment variables can be used to obtain information about the current installation:
+#   PRODUCT_ID: id of the current product
+#   CLIENT_DATA_DIR: directory which contains the installed client data
+#
diff --git a/OPSI/preinst b/OPSI/preinst
new file mode 100644
index 0000000..15a5320
--- /dev/null
+++ b/OPSI/preinst
@@ -0,0 +1,9 @@
+#! /bin/sh
+#
+# preinst script for softprod
+# This script executes before that package will be unpacked from its archive file.
+#
+# The following environment variables can be used to obtain information about the current installation:
+#   PRODUCT_ID: id of the current product
+#   CLIENT_DATA_DIR: directory where client data will be installed
+#
diff --git a/Testing.txt b/Testing.txt
new file mode 100644
index 0000000..d6b5e6c
--- /dev/null
+++ b/Testing.txt
@@ -0,0 +1,28 @@
+*** Qualitiymanagement/Testing procedure
+
+- Product:
+        - Name: productname
+        - Version: xxx
+        - Release: yyyy
+
+- Environment
+        - OS: Native windows XP-32Bit installation
+	- Preinstalled packages: None (also no aio)
+	- Files used while testing:
+                File1: http://domain.de/file.ext
+
+- Testing process:
+        OPSI-action:
+                - Installation (without dependencies like AIO/Firefox): ??
+        Result:   
+                - File extensions related to program: ??
+                - Start menu entry: ??
+                - Starting/using program: viewer works, File1 is shown correctly: ??
+
+        OPSI-action:
+                - Uninstall
+        Result:
+                - File extensions related to program: unrelated: ??
+                - Start menu entry: none: ??
+
+
diff --git a/brother.png.sha1sum b/brother.png.sha1sum
new file mode 100644
index 0000000..2ecadfe
--- /dev/null
+++ b/brother.png.sha1sum
@@ -0,0 +1 @@
+de6c31550b67fe6fad20f2bcf02a72c4869f797f  /home/dtrinks/.opsi-dist-cache/brother.com/brother7360/1//brother.png
diff --git a/brother7360.exe.sha1sum b/brother7360.exe.sha1sum
new file mode 100644
index 0000000..5222d7f
--- /dev/null
+++ b/brother7360.exe.sha1sum
@@ -0,0 +1 @@
+9986697df2b8377f19a7a5b31df90c31a2dee02a  /home/dtrinks/.opsi-dist-cache/brother.com/brother7360/B1/X86/brother7360.exe
diff --git a/brother7360.png.sha1sum b/brother7360.png.sha1sum
new file mode 100644
index 0000000..9a0a527
--- /dev/null
+++ b/brother7360.png.sha1sum
@@ -0,0 +1 @@
+1182219249c94ccae001dfa6e93b2c92b07234b2  /home/dtrinks/.opsi-dist-cache/brother.com/brother7360/1//brother7360.png
diff --git a/builder-product.cfg b/builder-product.cfg
new file mode 100644
index 0000000..7cd36cb
--- /dev/null
+++ b/builder-product.cfg
@@ -0,0 +1,31 @@
+############################
+# Setup product information
+############################
+VENDOR="brother.com"
+PN="brother7360"
+VERSION="1"
+RELEASE="1"
+PRIORITY="0"
+ADVICE=""
+
+# TYPE - defines, if the install files are public or restricted.
+# Valid value: restricted | public
+TYPE="public"
+
+DL_FILE[0]="brother7360.png"
+DL_SOURCE[0]="http://www.brother.com/library/fragments/brother_common_header_com/images/head_brotherlogo.gif"
+
+DL_FILE[1]="brother7360.exe"
+DL_SOURCE[1]="http://welcome.solutions.brother.com/BSC/public/files/dlf/dlf004578/Y10E_C1-gdi-32-B1.EXE"
+DL_ARCH[1]="X86"
+#DL_WINST_NAME[1]=Install32Exe
+
+DL_DOWNLOADER[1]="wget"
+DL_EXTRACT_FORMAT[1]="7zip"
+
+# File array index for the image showing while installing the program
+ICON_DL_INDEX=0
+
+WINST_NAME[0]="Drv_Dir"
+WINST_VALUE[0]="@DL_EXTRACT_WINST_PATH[1]@\\"
+
diff --git a/builder-targets-cb.sh b/builder-targets-cb.sh
index e69de29..9a3d4a8 100644
--- a/builder-targets-cb.sh
+++ b/builder-targets-cb.sh
@@ -0,0 +1,25 @@
+##############################################################################
+# This optional file "builder-targets-cb.sh" will be called by builder.sh 
+# 
+# The targets will be called from thde opsi-builder using the following
+# order: config, prepare, retrieve, create, package, publish, commit, cleanup 
+# You can overwrite the target functions in builder-targets-cb.sh
+# 
+# You can define callback functions. The functions are called from
+# opsi-builder within processing a target
+#   cb_package_makeproductfile
+#
+# You can use every variable defined in any configuration file or by
+# the defined builder script itself. Also, calling the predefined
+# targets builder_<targetname> is possible.
+#
+# Abstract:
+#  target order: config, prepare, retrieve, create, package, publish, commit, cleanup
+#  callbacks: <none>
+#
+##############################################################################
+
+function cleanup() {
+    echo "Cleanup"
+    builder_cleanup
+}