diff --git a/AUTHORS b/AUTHORS new file mode 100644 index 0000000..e69de29 diff --git a/LICENSES b/LICENSES new file mode 100644 index 0000000..e69de29 diff --git a/Makefile.am b/Makefile.am index d999d09..d87e741 100644 --- a/Makefile.am +++ b/Makefile.am @@ -1,14 +1,40 @@ -dist_bin_SCRIPTS = sunrise-commit -dist_man1_MANS = sunrise-commit.1 +EXTRA_DIST = README LICENSES AUTHORS -EXTRA_DIST = sunrise-commit.in sunrise-commit.1.in +bin_SCRIPTS = go-commit go-series2epatch go-patch go-checkPatch go-distclean go-redigest go-oneelf go-checkdeps +pkglib_SCRIPTS= go-pkgutil.rb +man1_MANS = go-commit.1 -$(dist_bin_SCRIPTS) $(dist_man1_MANS): configure.ac - rm -f $@ $@.tmp - sed -e "s|@PACKAGE_STRING[@]|@PACKAGE_STRING@|" ${srcdir}/$@.in > $@.tmp - ! [ -x $@ ] || chmod +x $@.tmp - chmod a-w $@.tmp - mv $@.tmp $@ -sunrise-commit: sunrise-commit.in -sunrise-commit.1: sunrise-commit.1.in +go-commit: + $(CP) sunrise-commit go-commit + +go-commit.1: + $(CP) sunrise-commit.1 go-commit.1 + +go-series2epatch: + $(CP) series2epatch go-series2epatch + +go-patch: + $(CP) lfspatch go-patch + +go-checkPatch: + $(CP) checkPatch go-checkPatch + +go-distclean: + $(CP) distclean-0.3.py go-distclean + +go-redigest: + $(CP) redigest go-redigest + +go-oneelf: + $(CP) oneelf.rb go-oneelf + +go-checkdeps: + $(CP) checkdeps.rb go-checkdeps + +go-pkgutil.rb: + $(CP) pkgutil.rb go-pkgutil.rb + +clean-local: + $(RM) -rf $(bin_SCRIPTS) $(pkglib_SCRIPTS) $(man1_MANS) go-utils-* + diff --git a/README b/README new file mode 100644 index 0000000..e69de29 diff --git a/autogen.sh b/autogen.sh new file mode 100755 index 0000000..5bce9ba --- /dev/null +++ b/autogen.sh @@ -0,0 +1,1578 @@ +#!/bin/sh +# a u t o g e n . s h +# +# Copyright (c) 2005-2009 United States Government as represented by +# the U.S. Army Research Laboratory. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials provided +# with the distribution. +# +# 3. The name of the author may not be used to endorse or promote +# products derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS +# OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY +# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE +# GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING +# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +### +# +# Script for automatically preparing the sources for compilation by +# performing the myriad of necessary steps. The script attempts to +# detect proper version support, and outputs warnings about particular +# systems that have autotool peculiarities. +# +# Basically, if everything is set up and installed correctly, the +# script will validate that minimum versions of the GNU Build System +# tools are installed, account for several common configuration +# issues, and then simply run autoreconf for you. +# +# If autoreconf fails, which can happen for many valid configurations, +# this script proceeds to run manual preparation steps effectively +# providing a POSIX shell script (mostly complete) reimplementation of +# autoreconf. +# +# The AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER +# environment variables and corresponding _OPTIONS variables (e.g. +# AUTORECONF_OPTIONS) may be used to override the default automatic +# detection behaviors. Similarly the _VERSION variables will override +# the minimum required version numbers. +# +# Examples: +# +# To obtain help on usage: +# ./autogen.sh --help +# +# To obtain verbose output: +# ./autogen.sh --verbose +# +# To skip autoreconf and prepare manually: +# AUTORECONF=false ./autogen.sh +# +# To verbosely try running with an older (unsupported) autoconf: +# AUTOCONF_VERSION=2.50 ./autogen.sh --verbose +# +# Author: +# Christopher Sean Morrison +# +# Patches: +# Sebastian Pipping +# +###################################################################### + +# set to minimum acceptable version of autoconf +if [ "x$AUTOCONF_VERSION" = "x" ] ; then + AUTOCONF_VERSION=2.52 +fi +# set to minimum acceptable version of automake +if [ "x$AUTOMAKE_VERSION" = "x" ] ; then + AUTOMAKE_VERSION=1.6.0 +fi +# set to minimum acceptable version of libtool +if [ "x$LIBTOOL_VERSION" = "x" ] ; then + LIBTOOL_VERSION=1.4.2 +fi + + +################## +# ident function # +################## +ident ( ) { + # extract copyright from header + __copyright="`grep Copyright $AUTOGEN_SH | head -${HEAD_N}1 | awk '{print $4}'`" + if [ "x$__copyright" = "x" ] ; then + __copyright="`date +%Y`" + fi + + # extract version from CVS Id string + __id="$Id: autogen.sh 33925 2009-03-01 23:27:06Z brlcad $" + __version="`echo $__id | sed 's/.*\([0-9][0-9][0-9][0-9]\)[-\/]\([0-9][0-9]\)[-\/]\([0-9][0-9]\).*/\1\2\3/'`" + if [ "x$__version" = "x" ] ; then + __version="" + fi + + echo "autogen.sh build preparation script by Christopher Sean Morrison" + echo " + config.guess download patch by Sebastian Pipping (2008-12-03)" + echo "revised 3-clause BSD-style license, copyright (c) $__copyright" + echo "script version $__version, ISO/IEC 9945 POSIX shell script" +} + + +################## +# USAGE FUNCTION # +################## +usage ( ) { + echo "Usage: $AUTOGEN_SH [-h|--help] [-v|--verbose] [-q|--quiet] [-d|--download] [--version]" + echo " --help Help on $NAME_OF_AUTOGEN usage" + echo " --verbose Verbose progress output" + echo " --quiet Quiet suppressed progress output" + echo " --download Download the latest config.guess from gnulib" + echo " --version Only perform GNU Build System version checks" + echo + echo "Description: This script will validate that minimum versions of the" + echo "GNU Build System tools are installed and then run autoreconf for you." + echo "Should autoreconf fail, manual preparation steps will be run" + echo "potentially accounting for several common preparation issues. The" + + echo "AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER," + echo "PROJECT, & CONFIGURE environment variables and corresponding _OPTIONS" + echo "variables (e.g. AUTORECONF_OPTIONS) may be used to override the" + echo "default automatic detection behavior." + echo + + ident + + return 0 +} + + +########################## +# VERSION_ERROR FUNCTION # +########################## +version_error ( ) { + if [ "x$1" = "x" ] ; then + echo "INTERNAL ERROR: version_error was not provided a version" + exit 1 + fi + if [ "x$2" = "x" ] ; then + echo "INTERNAL ERROR: version_error was not provided an application name" + exit 1 + fi + $ECHO + $ECHO "ERROR: To prepare the ${PROJECT} build system from scratch," + $ECHO " at least version $1 of $2 must be installed." + $ECHO + $ECHO "$NAME_OF_AUTOGEN does not need to be run on the same machine that will" + $ECHO "run configure or make. Either the GNU Autotools will need to be installed" + $ECHO "or upgraded on this system, or $NAME_OF_AUTOGEN must be run on the source" + $ECHO "code on another system and then transferred to here. -- Cheers!" + $ECHO +} + +########################## +# VERSION_CHECK FUNCTION # +########################## +version_check ( ) { + if [ "x$1" = "x" ] ; then + echo "INTERNAL ERROR: version_check was not provided a minimum version" + exit 1 + fi + _min="$1" + if [ "x$2" = "x" ] ; then + echo "INTERNAL ERROR: version check was not provided a comparison version" + exit 1 + fi + _cur="$2" + + # needed to handle versions like 1.10 and 1.4-p6 + _min="`echo ${_min}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`" + _cur="`echo ${_cur}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`" + + _min_major="`echo $_min | cut -d. -f1`" + _min_minor="`echo $_min | cut -d. -f2`" + _min_patch="`echo $_min | cut -d. -f3`" + + _cur_major="`echo $_cur | cut -d. -f1`" + _cur_minor="`echo $_cur | cut -d. -f2`" + _cur_patch="`echo $_cur | cut -d. -f3`" + + if [ "x$_min_major" = "x" ] ; then + _min_major=0 + fi + if [ "x$_min_minor" = "x" ] ; then + _min_minor=0 + fi + if [ "x$_min_patch" = "x" ] ; then + _min_patch=0 + fi + if [ "x$_cur_minor" = "x" ] ; then + _cur_major=0 + fi + if [ "x$_cur_minor" = "x" ] ; then + _cur_minor=0 + fi + if [ "x$_cur_patch" = "x" ] ; then + _cur_patch=0 + fi + + $VERBOSE_ECHO "Checking if ${_cur_major}.${_cur_minor}.${_cur_patch} is greater than ${_min_major}.${_min_minor}.${_min_patch}" + + if [ $_min_major -lt $_cur_major ] ; then + return 0 + elif [ $_min_major -eq $_cur_major ] ; then + if [ $_min_minor -lt $_cur_minor ] ; then + return 0 + elif [ $_min_minor -eq $_cur_minor ] ; then + if [ $_min_patch -lt $_cur_patch ] ; then + return 0 + elif [ $_min_patch -eq $_cur_patch ] ; then + return 0 + fi + fi + fi + return 1 +} + + +###################################### +# LOCATE_CONFIGURE_TEMPLATE FUNCTION # +###################################### +locate_configure_template ( ) { + _pwd="`pwd`" + if test -f "./configure.ac" ; then + echo "./configure.ac" + elif test -f "./configure.in" ; then + echo "./configure.in" + elif test -f "$_pwd/configure.ac" ; then + echo "$_pwd/configure.ac" + elif test -f "$_pwd/configure.in" ; then + echo "$_pwd/configure.in" + elif test -f "$PATH_TO_AUTOGEN/configure.ac" ; then + echo "$PATH_TO_AUTOGEN/configure.ac" + elif test -f "$PATH_TO_AUTOGEN/configure.in" ; then + echo "$PATH_TO_AUTOGEN/configure.in" + fi +} + + +################## +# argument check # +################## +ARGS="$*" +PATH_TO_AUTOGEN="`dirname $0`" +NAME_OF_AUTOGEN="`basename $0`" +AUTOGEN_SH="$PATH_TO_AUTOGEN/$NAME_OF_AUTOGEN" + +LIBTOOL_M4="${PATH_TO_AUTOGEN}/misc/libtool.m4" + +if [ "x$HELP" = "x" ] ; then + HELP=no +fi +if [ "x$QUIET" = "x" ] ; then + QUIET=no +fi +if [ "x$VERBOSE" = "x" ] ; then + VERBOSE=no +fi +if [ "x$VERSION_ONLY" = "x" ] ; then + VERSION_ONLY=no +fi +if [ "x$DOWNLOAD" = "x" ] ; then + DOWNLOAD=no +fi +if [ "x$AUTORECONF_OPTIONS" = "x" ] ; then + AUTORECONF_OPTIONS="-i -f" +fi +if [ "x$AUTOCONF_OPTIONS" = "x" ] ; then + AUTOCONF_OPTIONS="-f" +fi +if [ "x$AUTOMAKE_OPTIONS" = "x" ] ; then + AUTOMAKE_OPTIONS="-a -c -f" +fi +ALT_AUTOMAKE_OPTIONS="-a -c" +if [ "x$LIBTOOLIZE_OPTIONS" = "x" ] ; then + LIBTOOLIZE_OPTIONS="--automake -c -f" +fi +ALT_LIBTOOLIZE_OPTIONS="--automake --copy --force" +if [ "x$ACLOCAL_OPTIONS" = "x" ] ; then + ACLOCAL_OPTIONS="" +fi +if [ "x$AUTOHEADER_OPTIONS" = "x" ] ; then + AUTOHEADER_OPTIONS="" +fi +if [ "x$CONFIG_GUESS_URL" = "x" ] ; then + CONFIG_GUESS_URL="http://git.savannah.gnu.org/gitweb/?p=gnulib.git;a=blob_plain;f=build-aux/config.guess;hb=HEAD" +fi +for arg in $ARGS ; do + case "x$arg" in + x--help) HELP=yes ;; + x-[hH]) HELP=yes ;; + x--quiet) QUIET=yes ;; + x-[qQ]) QUIET=yes ;; + x--verbose) VERBOSE=yes ;; + x-[dD]) DOWNLOAD=yes ;; + x--download) DOWNLOAD=yes ;; + x-[vV]) VERBOSE=yes ;; + x--version) VERSION_ONLY=yes ;; + *) + echo "Unknown option: $arg" + echo + usage + exit 1 + ;; + esac +done + + +##################### +# environment check # +##################### + +# sanity check before recursions potentially begin +if [ ! -f "$AUTOGEN_SH" ] ; then + echo "INTERNAL ERROR: $AUTOGEN_SH does not exist" + if [ ! "x$0" = "x$AUTOGEN_SH" ] ; then + echo "INTERNAL ERROR: dirname/basename inconsistency: $0 != $AUTOGEN_SH" + fi + exit 1 +fi + +# force locale setting to C so things like date output as expected +LC_ALL=C + +# commands that this script expects +for __cmd in echo head tail pwd ; do + echo "test" | $__cmd > /dev/null 2>&1 + if [ $? != 0 ] ; then + echo "INTERNAL ERROR: '${__cmd}' command is required" + exit 2 + fi +done +echo "test" | grep "test" > /dev/null 2>&1 +if test ! x$? = x0 ; then + echo "INTERNAL ERROR: grep command is required" + exit 1 +fi +echo "test" | sed "s/test/test/" > /dev/null 2>&1 +if test ! x$? = x0 ; then + echo "INTERNAL ERROR: sed command is required" + exit 1 +fi + + +# determine the behavior of echo +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +# determine the behavior of head +case "x`echo 'head' | head -n 1 2>&1`" in + *xhead*) HEAD_N="n " ;; + *) HEAD_N="" ;; +esac + +# determine the behavior of tail +case "x`echo 'tail' | tail -n 1 2>&1`" in + *xtail*) TAIL_N="n " ;; + *) TAIL_N="" ;; +esac + +VERBOSE_ECHO=: +ECHO=: +if [ "x$QUIET" = "xyes" ] ; then + if [ "x$VERBOSE" = "xyes" ] ; then + echo "Verbose output quelled by quiet option. Further output disabled." + fi +else + ECHO=echo + if [ "x$VERBOSE" = "xyes" ] ; then + echo "Verbose output enabled" + VERBOSE_ECHO=echo + fi +fi + + +# allow a recursive run to disable further recursions +if [ "x$RUN_RECURSIVE" = "x" ] ; then + RUN_RECURSIVE=yes +fi + + +################################################ +# check for help arg and bypass version checks # +################################################ +if [ "x`echo $ARGS | sed 's/.*[hH][eE][lL][pP].*/help/'`" = "xhelp" ] ; then + HELP=yes +fi +if [ "x$HELP" = "xyes" ] ; then + usage + $ECHO "---" + $ECHO "Help was requested. No preparation or configuration will be performed." + exit 0 +fi + + +####################### +# set up signal traps # +####################### +untrap_abnormal ( ) { + for sig in 1 2 13 15; do + trap - $sig + done +} + +# do this cleanup whenever we exit. +trap ' + # start from the root + if test -d "$START_PATH" ; then + cd "$START_PATH" + fi + + # restore/delete backup files + if test "x$PFC_INIT" = "x1" ; then + recursive_restore + fi +' 0 + +# trap SIGHUP (1), SIGINT (2), SIGPIPE (13), SIGTERM (15) +for sig in 1 2 13 15; do + trap ' + $ECHO "" + $ECHO "Aborting $NAME_OF_AUTOGEN: caught signal '$sig'" + + # start from the root + if test -d "$START_PATH" ; then + cd "$START_PATH" + fi + + # clean up on abnormal exit + $VERBOSE_ECHO "rm -rf autom4te.cache" + rm -rf autom4te.cache + + if test -f "acinclude.m4.$$.backup" ; then + $VERBOSE_ECHO "cat acinclude.m4.$$.backup > acinclude.m4" + chmod u+w acinclude.m4 + cat acinclude.m4.$$.backup > acinclude.m4 + + $VERBOSE_ECHO "rm -f acinclude.m4.$$.backup" + rm -f acinclude.m4.$$.backup + fi + + { (exit 1); exit 1; } +' $sig +done + + +############################# +# look for a configure file # +############################# +if [ "x$CONFIGURE" = "x" ] ; then + CONFIGURE="`locate_configure_template`" + if [ ! "x$CONFIGURE" = "x" ] ; then + $VERBOSE_ECHO "Found a configure template: $CONFIGURE" + fi +else + $ECHO "Using CONFIGURE environment variable override: $CONFIGURE" +fi +if [ "x$CONFIGURE" = "x" ] ; then + if [ "x$VERSION_ONLY" = "xyes" ] ; then + CONFIGURE=/dev/null + else + $ECHO + $ECHO "A configure.ac or configure.in file could not be located implying" + $ECHO "that the GNU Build System is at least not used in this directory. In" + $ECHO "any case, there is nothing to do here without one of those files." + $ECHO + $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`" + exit 1 + fi +fi + +#################### +# get project name # +#################### +if [ "x$PROJECT" = "x" ] ; then + PROJECT="`grep AC_INIT $CONFIGURE | grep -v '.*#.*AC_INIT' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_INIT(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" + if [ "x$PROJECT" = "xAC_INIT" ] ; then + # projects might be using the older/deprecated arg-less AC_INIT .. look for AM_INIT_AUTOMAKE instead + PROJECT="`grep AM_INIT_AUTOMAKE $CONFIGURE | grep -v '.*#.*AM_INIT_AUTOMAKE' | tail -${TAIL_N}1 | sed 's/^[ ]*AM_INIT_AUTOMAKE(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" + fi + if [ "x$PROJECT" = "xAM_INIT_AUTOMAKE" ] ; then + PROJECT="project" + fi + if [ "x$PROJECT" = "x" ] ; then + PROJECT="project" + fi +else + $ECHO "Using PROJECT environment variable override: $PROJECT" +fi +$ECHO "Preparing the $PROJECT build system...please wait" +$ECHO + + +######################## +# check for autoreconf # +######################## +HAVE_AUTORECONF=no +if [ "x$AUTORECONF" = "x" ] ; then + for AUTORECONF in autoreconf ; do + $VERBOSE_ECHO "Checking autoreconf version: $AUTORECONF --version" + $AUTORECONF --version > /dev/null 2>&1 + if [ $? = 0 ] ; then + HAVE_AUTORECONF=yes + break + fi + done +else + HAVE_AUTORECONF=yes + $ECHO "Using AUTORECONF environment variable override: $AUTORECONF" +fi + + +########################## +# autoconf version check # +########################## +_acfound=no +if [ "x$AUTOCONF" = "x" ] ; then + for AUTOCONF in autoconf ; do + $VERBOSE_ECHO "Checking autoconf version: $AUTOCONF --version" + $AUTOCONF --version > /dev/null 2>&1 + if [ $? = 0 ] ; then + _acfound=yes + break + fi + done +else + _acfound=yes + $ECHO "Using AUTOCONF environment variable override: $AUTOCONF" +fi + +_report_error=no +if [ ! "x$_acfound" = "xyes" ] ; then + $ECHO "ERROR: Unable to locate GNU Autoconf." + _report_error=yes +else + _version="`$AUTOCONF --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`" + if [ "x$_version" = "x" ] ; then + _version="0.0.0" + fi + $ECHO "Found GNU Autoconf version $_version" + version_check "$AUTOCONF_VERSION" "$_version" + if [ $? -ne 0 ] ; then + _report_error=yes + fi +fi +if [ "x$_report_error" = "xyes" ] ; then + version_error "$AUTOCONF_VERSION" "GNU Autoconf" + exit 1 +fi + + +########################## +# automake version check # +########################## +_amfound=no +if [ "x$AUTOMAKE" = "x" ] ; then + for AUTOMAKE in automake ; do + $VERBOSE_ECHO "Checking automake version: $AUTOMAKE --version" + $AUTOMAKE --version > /dev/null 2>&1 + if [ $? = 0 ] ; then + _amfound=yes + break + fi + done +else + _amfound=yes + $ECHO "Using AUTOMAKE environment variable override: $AUTOMAKE" +fi + + +_report_error=no +if [ ! "x$_amfound" = "xyes" ] ; then + $ECHO + $ECHO "ERROR: Unable to locate GNU Automake." + _report_error=yes +else + _version="`$AUTOMAKE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`" + if [ "x$_version" = "x" ] ; then + _version="0.0.0" + fi + $ECHO "Found GNU Automake version $_version" + version_check "$AUTOMAKE_VERSION" "$_version" + if [ $? -ne 0 ] ; then + _report_error=yes + fi +fi +if [ "x$_report_error" = "xyes" ] ; then + version_error "$AUTOMAKE_VERSION" "GNU Automake" + exit 1 +fi + + +######################## +# check for libtoolize # +######################## +HAVE_LIBTOOLIZE=yes +HAVE_ALT_LIBTOOLIZE=no +_ltfound=no +if [ "x$LIBTOOLIZE" = "x" ] ; then + LIBTOOLIZE=libtoolize + $VERBOSE_ECHO "Checking libtoolize version: $LIBTOOLIZE --version" + $LIBTOOLIZE --version > /dev/null 2>&1 + if [ ! $? = 0 ] ; then + HAVE_LIBTOOLIZE=no + $ECHO + if [ "x$HAVE_AUTORECONF" = "xno" ] ; then + $ECHO "Warning: libtoolize does not appear to be available." + else + $ECHO "Warning: libtoolize does not appear to be available. This means that" + $ECHO "the automatic build preparation via autoreconf will probably not work." + $ECHO "Preparing the build by running each step individually, however, should" + $ECHO "work and will be done automatically for you if autoreconf fails." + fi + + # look for some alternates + for tool in glibtoolize libtoolize15 libtoolize14 libtoolize13 ; do + $VERBOSE_ECHO "Checking libtoolize alternate: $tool --version" + _glibtoolize="`$tool --version > /dev/null 2>&1`" + if [ $? = 0 ] ; then + $VERBOSE_ECHO "Found $tool --version" + _glti="`which $tool`" + if [ "x$_glti" = "x" ] ; then + $VERBOSE_ECHO "Cannot find $tool with which" + continue; + fi + if test ! -f "$_glti" ; then + $VERBOSE_ECHO "Cannot use $tool, $_glti is not a file" + continue; + fi + _gltidir="`dirname $_glti`" + if [ "x$_gltidir" = "x" ] ; then + $VERBOSE_ECHO "Cannot find $tool path with dirname of $_glti" + continue; + fi + if test ! -d "$_gltidir" ; then + $VERBOSE_ECHO "Cannot use $tool, $_gltidir is not a directory" + continue; + fi + HAVE_ALT_LIBTOOLIZE=yes + LIBTOOLIZE="$tool" + $ECHO + $ECHO "Fortunately, $tool was found which means that your system may simply" + $ECHO "have a non-standard or incomplete GNU Autotools install. If you have" + $ECHO "sufficient system access, it may be possible to quell this warning by" + $ECHO "running:" + $ECHO + sudo -V > /dev/null 2>&1 + if [ $? = 0 ] ; then + $ECHO " sudo ln -s $_glti $_gltidir/libtoolize" + $ECHO + else + $ECHO " ln -s $_glti $_gltidir/libtoolize" + $ECHO + $ECHO "Run that as root or with proper permissions to the $_gltidir directory" + $ECHO + fi + _ltfound=yes + break + fi + done + else + _ltfound=yes + fi +else + _ltfound=yes + $ECHO "Using LIBTOOLIZE environment variable override: $LIBTOOLIZE" +fi + + +############################ +# libtoolize version check # +############################ +_report_error=no +if [ ! "x$_ltfound" = "xyes" ] ; then + $ECHO + $ECHO "ERROR: Unable to locate GNU Libtool." + _report_error=yes +else + _version="`$LIBTOOLIZE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`" + if [ "x$_version" = "x" ] ; then + _version="0.0.0" + fi + $ECHO "Found GNU Libtool version $_version" + version_check "$LIBTOOL_VERSION" "$_version" + if [ $? -ne 0 ] ; then + _report_error=yes + fi +fi +if [ "x$_report_error" = "xyes" ] ; then + version_error "$LIBTOOL_VERSION" "GNU Libtool" + exit 1 +fi + + +##################### +# check for aclocal # +##################### +if [ "x$ACLOCAL" = "x" ] ; then + for ACLOCAL in aclocal ; do + $VERBOSE_ECHO "Checking aclocal version: $ACLOCAL --version" + $ACLOCAL --version > /dev/null 2>&1 + if [ $? = 0 ] ; then + break + fi + done +else + $ECHO "Using ACLOCAL environment variable override: $ACLOCAL" +fi + + +######################## +# check for autoheader # +######################## +if [ "x$AUTOHEADER" = "x" ] ; then + for AUTOHEADER in autoheader ; do + $VERBOSE_ECHO "Checking autoheader version: $AUTOHEADER --version" + $AUTOHEADER --version > /dev/null 2>&1 + if [ $? = 0 ] ; then + break + fi + done +else + $ECHO "Using AUTOHEADER environment variable override: $AUTOHEADER" +fi + + +######################### +# check if version only # +######################### +$VERBOSE_ECHO "Checking whether to only output version information" +if [ "x$VERSION_ONLY" = "xyes" ] ; then + $ECHO + ident + $ECHO "---" + $ECHO "Version requested. No preparation or configuration will be performed." + exit 0 +fi + + +################################# +# PROTECT_FROM_CLOBBER FUNCTION # +################################# +protect_from_clobber ( ) { + PFC_INIT=1 + + # protect COPYING & INSTALL from overwrite by automake. the + # automake force option will (inappropriately) ignore the existing + # contents of a COPYING and/or INSTALL files (depending on the + # version) instead of just forcing *missing* files like it does + # for AUTHORS, NEWS, and README. this is broken but extremely + # prevalent behavior, so we protect against it by keeping a backup + # of the file that can later be restored. + + for file in COPYING INSTALL ; do + if test -f ${file} ; then + if test -f ${file}.$$.protect_from_automake.backup ; then + $VERBOSE_ECHO "Already backed up ${file} in `pwd`" + else + $VERBOSE_ECHO "Backing up ${file} in `pwd`" + $VERBOSE_ECHO "cp -p ${file} ${file}.$$.protect_from_automake.backup" + cp -p ${file} ${file}.$$.protect_from_automake.backup + fi + fi + done +} + + +############################## +# RECURSIVE_PROTECT FUNCTION # +############################## +recursive_protect ( ) { + + # for projects using recursive configure, run the build + # preparation steps for the subdirectories. this function assumes + # START_PATH was set to pwd before recursion begins so that + # relative paths work. + + # git 'r done, protect COPYING and INSTALL from being clobbered + protect_from_clobber + + if test -d autom4te.cache ; then + $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it" + $VERBOSE_ECHO "rm -rf autom4te.cache" + rm -rf autom4te.cache + fi + + # find configure template + _configure="`locate_configure_template`" + if [ "x$_configure" = "x" ] ; then + return + fi + # $VERBOSE_ECHO "Looking for configure template found `pwd`/$_configure" + + # look for subdirs + # $VERBOSE_ECHO "Looking for subdirs in `pwd`" + _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" + CHECK_DIRS="" + for dir in $_det_config_subdirs ; do + if test -d "`pwd`/$dir" ; then + CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\"" + fi + done + + # process subdirs + if [ ! "x$CHECK_DIRS" = "x" ] ; then + $VERBOSE_ECHO "Recursively scanning the following directories:" + $VERBOSE_ECHO " $CHECK_DIRS" + for dir in $CHECK_DIRS ; do + $VERBOSE_ECHO "Protecting files from automake in $dir" + cd "$START_PATH" + eval "cd $dir" + + # recursively git 'r done + recursive_protect + done + fi +} # end of recursive_protect + + +############################# +# RESTORE_CLOBBERED FUNCION # +############################# +restore_clobbered ( ) { + + # The automake (and autoreconf by extension) -f/--force-missing + # option may overwrite COPYING and INSTALL even if they do exist. + # Here we restore the files if necessary. + + spacer=no + + for file in COPYING INSTALL ; do + if test -f ${file}.$$.protect_from_automake.backup ; then + if test -f ${file} ; then + # compare entire content, restore if needed + if test "x`cat ${file}`" != "x`cat ${file}.$$.protect_from_automake.backup`" ; then + if test "x$spacer" = "xno" ; then + $VERBOSE_ECHO + spacer=yes + fi + # restore the backup + $VERBOSE_ECHO "Restoring ${file} from backup (automake -f likely clobbered it)" + $VERBOSE_ECHO "rm -f ${file}" + rm -f ${file} + $VERBOSE_ECHO "mv ${file}.$$.protect_from_automake.backup ${file}" + mv ${file}.$$.protect_from_automake.backup ${file} + fi # check contents + elif test -f ${file}.$$.protect_from_automake.backup ; then + $VERBOSE_ECHO "mv ${file}.$$.protect_from_automake.backup ${file}" + mv ${file}.$$.protect_from_automake.backup ${file} + fi # -f ${file} + + # just in case + $VERBOSE_ECHO "rm -f ${file}.$$.protect_from_automake.backup" + rm -f ${file}.$$.protect_from_automake.backup + fi # -f ${file}.$$.protect_from_automake.backup + done + + CONFIGURE="`locate_configure_template`" + if [ "x$CONFIGURE" = "x" ] ; then + return + fi + + _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" + if test ! -d "$_aux_dir" ; then + _aux_dir=. + fi + + for file in config.guess config.sub ltmain.sh ; do + if test -f "${_aux_dir}/${file}" ; then + $VERBOSE_ECHO "rm -f \"${_aux_dir}/${file}.backup\"" + rm -f "${_aux_dir}/${file}.backup" + fi + done +} # end of restore_clobbered + + +############################## +# RECURSIVE_RESTORE FUNCTION # +############################## +recursive_restore ( ) { + + # restore COPYING and INSTALL from backup if they were clobbered + # for each directory recursively. + + # git 'r undone + restore_clobbered + + # find configure template + _configure="`locate_configure_template`" + if [ "x$_configure" = "x" ] ; then + return + fi + + # look for subdirs + _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" + CHECK_DIRS="" + for dir in $_det_config_subdirs ; do + if test -d "`pwd`/$dir" ; then + CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\"" + fi + done + + # process subdirs + if [ ! "x$CHECK_DIRS" = "x" ] ; then + $VERBOSE_ECHO "Recursively scanning the following directories:" + $VERBOSE_ECHO " $CHECK_DIRS" + for dir in $CHECK_DIRS ; do + $VERBOSE_ECHO "Checking files for automake damage in $dir" + cd "$START_PATH" + eval "cd $dir" + + # recursively git 'r undone + recursive_restore + done + fi +} # end of recursive_restore + + +####################### +# INITIALIZE FUNCTION # +####################### +initialize ( ) { + + # this routine performs a variety of directory-specific + # initializations. some are sanity checks, some are preventive, + # and some are necessary setup detection. + # + # this function sets: + # CONFIGURE + # SEARCH_DIRS + # CONFIG_SUBDIRS + + ################################## + # check for a configure template # + ################################## + CONFIGURE="`locate_configure_template`" + if [ "x$CONFIGURE" = "x" ] ; then + $ECHO + $ECHO "A configure.ac or configure.in file could not be located implying" + $ECHO "that the GNU Build System is at least not used in this directory. In" + $ECHO "any case, there is nothing to do here without one of those files." + $ECHO + $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`" + exit 1 + fi + + ##################### + # detect an aux dir # + ##################### + _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" + if test ! -d "$_aux_dir" ; then + _aux_dir=. + else + $VERBOSE_ECHO "Detected auxillary directory: $_aux_dir" + fi + + ################################ + # detect a recursive configure # + ################################ + CONFIG_SUBDIRS="" + _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $CONFIGURE | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" + for dir in $_det_config_subdirs ; do + if test -d "`pwd`/$dir" ; then + $VERBOSE_ECHO "Detected recursive configure directory: `pwd`/$dir" + CONFIG_SUBDIRS="$CONFIG_SUBDIRS `pwd`/$dir" + fi + done + + ########################################################### + # make sure certain required files exist for GNU projects # + ########################################################### + _marker_found="" + _marker_found_message_intro='Detected non-GNU marker "' + _marker_found_message_mid='" in ' + for marker in foreign cygnus ; do + _marker_found_message=${_marker_found_message_intro}${marker}${_marker_found_message_mid} + _marker_found="`grep 'AM_INIT_AUTOMAKE.*'${marker} $CONFIGURE`" + if [ ! "x$_marker_found" = "x" ] ; then + $VERBOSE_ECHO "${_marker_found_message}`basename \"$CONFIGURE\"`" + break + fi + if test -f "`dirname \"$CONFIGURE\"/Makefile.am`" ; then + _marker_found="`grep 'AUTOMAKE_OPTIONS.*'${marker} Makefile.am`" + if [ ! "x$_marker_found" = "x" ] ; then + $VERBOSE_ECHO "${_marker_found_message}Makefile.am" + break + fi + fi + done + if [ "x${_marker_found}" = "x" ] ; then + _suggest_foreign=no + for file in AUTHORS COPYING ChangeLog INSTALL NEWS README ; do + if [ ! -f $file ] ; then + $VERBOSE_ECHO "Touching ${file} since it does not exist" + _suggest_foreign=yes + touch $file + fi + done + + if [ "x${_suggest_foreign}" = "xyes" ] ; then + $ECHO + $ECHO "Warning: Several files expected of projects that conform to the GNU" + $ECHO "coding standards were not found. The files were automatically added" + $ECHO "for you since you do not have a 'foreign' declaration specified." + $ECHO + $ECHO "Considered adding 'foreign' to AM_INIT_AUTOMAKE in `basename \"$CONFIGURE\"`" + if test -f "`dirname \"$CONFIGURE\"/Makefile.am`" ; then + $ECHO "or to AUTOMAKE_OPTIONS in your top-level Makefile.am file." + fi + $ECHO + fi + fi + + ################################################## + # make sure certain generated files do not exist # + ################################################## + for file in config.guess config.sub ltmain.sh ; do + if test -f "${_aux_dir}/${file}" ; then + $VERBOSE_ECHO "mv -f \"${_aux_dir}/${file}\" \"${_aux_dir}/${file}.backup\"" + mv -f "${_aux_dir}/${file}" "${_aux_dir}/${file}.backup" + fi + done + + ############################ + # search alternate m4 dirs # + ############################ + SEARCH_DIRS="" + for dir in m4 ; do + if [ -d $dir ] ; then + $VERBOSE_ECHO "Found extra aclocal search directory: $dir" + SEARCH_DIRS="$SEARCH_DIRS -I $dir" + fi + done + + ###################################### + # remove any previous build products # + ###################################### + if test -d autom4te.cache ; then + $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it" + $VERBOSE_ECHO "rm -rf autom4te.cache" + rm -rf autom4te.cache + fi +# tcl/tk (and probably others) have a customized aclocal.m4, so can't delete it +# if test -f aclocal.m4 ; then +# $VERBOSE_ECHO "Found an aclocal.m4 file, deleting it" +# $VERBOSE_ECHO "rm -f aclocal.m4" +# rm -f aclocal.m4 +# fi + +} # end of initialize() + + +############## +# initialize # +############## + +# stash path +START_PATH="`pwd`" + +# Before running autoreconf or manual steps, some prep detection work +# is necessary or useful. Only needs to occur once per directory, but +# does need to traverse the entire subconfigure hierarchy to protect +# files from being clobbered even by autoreconf. +recursive_protect + +# start from where we started +cd "$START_PATH" + +# get ready to process +initialize + + +######################################### +# DOWNLOAD_GNULIB_CONFIG_GUESS FUNCTION # +######################################### + +# TODO - should make sure wget/curl exist and/or work before trying to +# use them. + +download_gnulib_config_guess () { + # abuse gitweb to download gnulib's latest config.guess via HTTP + config_guess_temp="config.guess.$$.download" + ret=1 + for __cmd in wget curl fetch ; do + $VERBOSE_ECHO "Checking for command ${__cmd}" + ${__cmd} --version > /dev/null 2>&1 + ret=$? + if [ ! $ret = 0 ] ; then + continue + fi + + __cmd_version=`${__cmd} --version | head -n 1 | sed -e 's/^[^0-9]\+//' -e 's/ .*//'` + $VERBOSE_ECHO "Found ${__cmd} ${__cmd_version}" + + opts="" + case ${__cmd} in + wget) + opts="-O" + ;; + curl) + opts="-o" + ;; + fetch) + opts="-t 5 -f" + ;; + esac + + $VERBOSE_ECHO "Running $__cmd \"${CONFIG_GUESS_URL}\" $opts \"${config_guess_temp}\"" + eval "$__cmd \"${CONFIG_GUESS_URL}\" $opts \"${config_guess_temp}\"" > /dev/null 2>&1 + if [ $? = 0 ] ; then + mv -f "${config_guess_temp}" ${_aux_dir}/config.guess + ret=0 + break + fi + done + + if [ ! $ret = 0 ] ; then + $ECHO "Warning: config.guess download failed from: $CONFIG_GUESS_URL" + rm -f "${config_guess_temp}" + fi +} + + +############################## +# LIBTOOLIZE_NEEDED FUNCTION # +############################## +libtoolize_needed () { + ret=1 # means no, don't need libtoolize + for feature in AC_PROG_LIBTOOL AM_PROG_LIBTOOL LT_INIT ; do + $VERBOSE_ECHO "Searching for $feature in $CONFIGURE" + found="`grep \"^$feature.*\" $CONFIGURE`" + if [ ! "x$found" = "x" ] ; then + ret=0 # means yes, need to run libtoolize + break + fi + done + return ${ret} +} + + + +############################################ +# prepare build via autoreconf or manually # +############################################ +reconfigure_manually=no +if [ "x$HAVE_AUTORECONF" = "xyes" ] ; then + $ECHO + $ECHO $ECHO_N "Automatically preparing build ... $ECHO_C" + + $VERBOSE_ECHO "$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS" + autoreconf_output="`$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS 2>&1`" + ret=$? + $VERBOSE_ECHO "$autoreconf_output" + + if [ ! $ret = 0 ] ; then + if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then + if [ ! "x`echo \"$autoreconf_output\" | grep libtoolize | grep \"No such file or directory\"`" = "x" ] ; then + $ECHO + $ECHO "Warning: autoreconf failed but due to what is usually a common libtool" + $ECHO "misconfiguration issue. This problem is encountered on systems that" + $ECHO "have installed libtoolize under a different name without providing a" + $ECHO "symbolic link or without setting the LIBTOOLIZE environment variable." + $ECHO + $ECHO "Restarting the preparation steps with LIBTOOLIZE set to $LIBTOOLIZE" + + export LIBTOOLIZE + RUN_RECURSIVE=no + export RUN_RECURSIVE + untrap_abnormal + + $VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9" + sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9" + exit $? + fi + fi + + $ECHO "Warning: $AUTORECONF failed" + + if test -f ltmain.sh ; then + $ECHO "libtoolize being run by autoreconf is not creating ltmain.sh in the auxillary directory like it should" + fi + + $ECHO "Attempting to run the preparation steps individually" + reconfigure_manually=yes + else + if [ "x$DOWNLOAD" = "xyes" ] ; then + if libtoolize_needed ; then + download_gnulib_config_guess + fi + fi + fi +else + reconfigure_manually=yes +fi + + +############################ +# LIBTOOL_FAILURE FUNCTION # +############################ +libtool_failure ( ) { + + # libtool is rather error-prone in comparison to the other + # autotools and this routine attempts to compensate for some + # common failures. the output after a libtoolize failure is + # parsed for an error related to AC_PROG_LIBTOOL and if found, we + # attempt to inject a project-provided libtool.m4 file. + + _autoconf_output="$1" + + if [ "x$RUN_RECURSIVE" = "xno" ] ; then + # we already tried the libtool.m4, don't try again + return 1 + fi + + if test -f "$LIBTOOL_M4" ; then + found_libtool="`$ECHO $_autoconf_output | grep AC_PROG_LIBTOOL`" + if test ! "x$found_libtool" = "x" ; then + if test -f acinclude.m4 ; then + rm -f acinclude.m4.$$.backup + $VERBOSE_ECHO "cat acinclude.m4 > acinclude.m4.$$.backup" + cat acinclude.m4 > acinclude.m4.$$.backup + fi + $VERBOSE_ECHO "cat \"$LIBTOOL_M4\" >> acinclude.m4" + chmod u+w acinclude.m4 + cat "$LIBTOOL_M4" >> acinclude.m4 + + # don't keep doing this + RUN_RECURSIVE=no + export RUN_RECURSIVE + untrap_abnormal + + $ECHO + $ECHO "Restarting the preparation steps with libtool macros in acinclude.m4" + $VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9" + sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9" + exit $? + fi + fi +} + + +########################### +# MANUAL_AUTOGEN FUNCTION # +########################### +manual_autogen ( ) { + + ################################################## + # Manual preparation steps taken are as follows: # + # aclocal [-I m4] # + # libtoolize --automake -c -f # + # aclocal [-I m4] # + # autoconf -f # + # autoheader # + # automake -a -c -f # + ################################################## + + ########### + # aclocal # + ########### + $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS" + aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`" + ret=$? + $VERBOSE_ECHO "$aclocal_output" + if [ ! $ret = 0 ] ; then $ECHO "ERROR: $ACLOCAL failed" && exit 2 ; fi + + ############## + # libtoolize # + ############## + if libtoolize_needed ; then + if [ "x$HAVE_LIBTOOLIZE" = "xyes" ] ; then + $VERBOSE_ECHO "$LIBTOOLIZE $LIBTOOLIZE_OPTIONS" + libtoolize_output="`$LIBTOOLIZE $LIBTOOLIZE_OPTIONS 2>&1`" + ret=$? + $VERBOSE_ECHO "$libtoolize_output" + + if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi + else + if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then + $VERBOSE_ECHO "$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS" + libtoolize_output="`$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS 2>&1`" + ret=$? + $VERBOSE_ECHO "$libtoolize_output" + + if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi + fi + fi + + ########### + # aclocal # + ########### + # re-run again as instructed by libtoolize + $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS" + aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`" + ret=$? + $VERBOSE_ECHO "$aclocal_output" + + # libtoolize might put ltmain.sh in the wrong place + if test -f ltmain.sh ; then + if test ! -f "${_aux_dir}/ltmain.sh" ; then + $ECHO + $ECHO "Warning: $LIBTOOLIZE is creating ltmain.sh in the wrong directory" + $ECHO + $ECHO "Fortunately, the problem can be worked around by simply copying the" + $ECHO "file to the appropriate location (${_aux_dir}/). This has been done for you." + $ECHO + $VERBOSE_ECHO "cp -p ltmain.sh \"${_aux_dir}/ltmain.sh\"" + cp -p ltmain.sh "${_aux_dir}/ltmain.sh" + $ECHO $ECHO_N "Continuing build preparation ... $ECHO_C" + fi + fi # ltmain.sh + + if [ "x$DOWNLOAD" = "xyes" ] ; then + download_gnulib_config_guess + fi + fi # libtoolize_needed + + ############ + # autoconf # + ############ + $VERBOSE_ECHO + $VERBOSE_ECHO "$AUTOCONF $AUTOCONF_OPTIONS" + autoconf_output="`$AUTOCONF $AUTOCONF_OPTIONS 2>&1`" + ret=$? + $VERBOSE_ECHO "$autoconf_output" + + if [ ! $ret = 0 ] ; then + # retry without the -f and check for usage of macros that are too new + ac2_59_macros="AC_C_RESTRICT AC_INCLUDES_DEFAULT AC_LANG_ASSERT AC_LANG_WERROR AS_SET_CATFILE" + ac2_55_macros="AC_COMPILER_IFELSE AC_FUNC_MBRTOWC AC_HEADER_STDBOOL AC_LANG_CONFTEST AC_LANG_SOURCE AC_LANG_PROGRAM AC_LANG_CALL AC_LANG_FUNC_TRY_LINK AC_MSG_FAILURE AC_PREPROC_IFELSE" + ac2_54_macros="AC_C_BACKSLASH_A AC_CONFIG_LIBOBJ_DIR AC_GNU_SOURCE AC_PROG_EGREP AC_PROG_FGREP AC_REPLACE_FNMATCH AC_FUNC_FNMATCH_GNU AC_FUNC_REALLOC AC_TYPE_MBSTATE_T" + + macros_to_search="" + ac_major="`echo ${AUTOCONF_VERSION}. | cut -d. -f1 | sed 's/[^0-9]//g'`" + ac_minor="`echo ${AUTOCONF_VERSION}. | cut -d. -f2 | sed 's/[^0-9]//g'`" + + if [ $ac_major -lt 2 ] ; then + macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros" + else + if [ $ac_minor -lt 54 ] ; then + macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros" + elif [ $ac_minor -lt 55 ] ; then + macros_to_search="$ac2_59_macros $ac2_55_macros" + elif [ $ac_minor -lt 59 ] ; then + macros_to_search="$ac2_59_macros" + fi + fi + + configure_ac_macros=__none__ + for feature in $macros_to_search ; do + $VERBOSE_ECHO "Searching for $feature in $CONFIGURE" + found="`grep \"^$feature.*\" $CONFIGURE`" + if [ ! "x$found" = "x" ] ; then + if [ "x$configure_ac_macros" = "x__none__" ] ; then + configure_ac_macros="$feature" + else + configure_ac_macros="$feature $configure_ac_macros" + fi + fi + done + if [ ! "x$configure_ac_macros" = "x__none__" ] ; then + $ECHO + $ECHO "Warning: Unsupported macros were found in $CONFIGURE" + $ECHO + $ECHO "The `basename \"$CONFIGURE\"` file was scanned in order to determine if any" + $ECHO "unsupported macros are used that exceed the minimum version" + $ECHO "settings specified within this file. As such, the following macros" + $ECHO "should be removed from configure.ac or the version numbers in this" + $ECHO "file should be increased:" + $ECHO + $ECHO "$configure_ac_macros" + $ECHO + $ECHO $ECHO_N "Ignorantly continuing build preparation ... $ECHO_C" + fi + + ################### + # autoconf, retry # + ################### + $VERBOSE_ECHO + $VERBOSE_ECHO "$AUTOCONF" + autoconf_output="`$AUTOCONF 2>&1`" + ret=$? + $VERBOSE_ECHO "$autoconf_output" + + if [ ! $ret = 0 ] ; then + # test if libtool is busted + libtool_failure "$autoconf_output" + + # let the user know what went wrong + cat < + +$: << File.dirname(__FILE__) +require "@LIBDIR@/@PACKAGE@/go-pkgutil.rb" + +$verbose = false +$quiet = false + +pkgs_to_check=[] + +def print_help(exit_value) + puts 'Info: @PACKAGE_STRING@' + puts 'Usage: go-checkdeps opts|pkgs' + puts + puts 'Options:' + puts '-q, --quiet' + puts '-v, --verbose' + puts '-h, --help' + puts '-d, --debug' + puts + puts 'Everything else is passed to qfile as it is' + exit(exit_value) +end + +ARGV.each do | arg | + if arg =~ /^(-v|--verbose)$/ + $verbose = true + elsif arg =~ /^(-h|--help)$/ + print_help(0) + elsif arg =~ /^(-q|--quiet)$/ + $quiet = true + elsif arg =~ /^(-d|--debug)$/ + $DEBUG = true + $verbose = true + else + pkgs_to_check << arg + end +end + +pkgs_to_check.length == 0 && print_help(1) + +class ElfObj + attr_reader :path, :pkgs + + def initialize(path) + @path = path + @pkgs = [] + end + + def <<(pkg) + if ! @pkgs.index(pkg) + @pkgs << pkg + else + nil + end + end + + def <=>(r) + return @path <=> r.path + end + + def to_s() + puts 'ElfObj to_s:' if $DEBUG + s = "\t" + @path + s+="\t" + @path + "\n\t\t" + @pkgs.sort.join("\n\t\t") if $DEBUG + s + end +end + + +def handle_new_lib(obj,lib) + puts 'library: ' + lib if $DEBUG + $lib_hash[lib]=nil + pkg = get_pkg_of_lib(lib) + + if ! pkg + return + end + + if obj_table = $pkg_hash[pkg] + obj_table << obj + else + $pkg_hash[pkg]=[obj] + obj << pkg + end +end + +$lib_hash ={} +$pkg_hash ={} + +qlist = IO.popen("qlist #{pkgs_to_check.join(' ')}") + +scan_elf = ScanElf.instance + +while obj = qlist.gets + obj.rstrip! + if is_elf(obj) + puts 'obj: ' + obj if $DEBUG + elf_obj = ElfObj.new(obj) + scan_elf.each(obj) do | lib | + handle_new_lib(elf_obj,lib) unless $lib_hash.key?(lib) + end + else + puts "#{file} is not executable or a normal file" if $verbose + end +end + +qlist.close + +if $? != 0 + $stderr.puts('qlist did not run succesfully.') + $stderr.puts('Please emerge portage-utils if you don\'t already have it.') +end + +$pkg_hash.sort.each do | pair | + puts 'Key: ' if $DEBUG + puts pair[0] + puts 'Value: ' if $DEBUG + puts pair[1].uniq.sort unless $quiet + puts 'end Hash.' if $DEBUG +end + +if $verbose + puts $lib_hash.keys +end diff --git a/configure.ac b/configure.ac index 65acdcc..bec2054 100644 --- a/configure.ac +++ b/configure.ac @@ -1,7 +1,32 @@ AC_PREREQ([2.59]) -AC_INIT([sunrise-commit], [0.3]) -AC_CONFIG_AUX_DIR([build-aux]) +AC_INIT([go-utils], [0.3]) +AC_CONFIG_MACRO_DIR([m4]) + AM_INIT_AUTOMAKE([1.6 foreign dist-bzip2 no-dependencies]) +AM_MAINTAINER_MODE + +AC_DEFINE_DIR(DATADIR, datadir) +AC_DEFINE_DIR(LIBDIR, libdir) +AC_DEFINE_DIR(LOCALSTATEDIR, localstatedir) + +# Check common programs +AC_PROG_INSTALL +AC_PROG_LN_S +AC_CHECK_PROG([RM], rm, rm, [], [$PATH]) +AC_CHECK_PROG([CP], cp, cp, [], [$PATH]) +AC_CHECK_PROG([CHMOD], chmod, chmod, [], [$PATH]) + + AC_CONFIG_FILES([Makefile]) +AC_CONFIG_FILES([checkPatch], [chmod +x checkPatch]) +AC_CONFIG_FILES([checkdeps.rb], [chmod +x checkdeps.rb]) +AC_CONFIG_FILES([oneelf.rb], [chmod +x oneelf.rb]) +AC_CONFIG_FILES([pkgutil.rb], [chmod +x pkgutil.rb]) +AC_CONFIG_FILES([distclean-0.3.py], [chmod +x distclean-0.3.py]) +AC_CONFIG_FILES([lfspatch], [chmod +x lfspatch]) +AC_CONFIG_FILES([redigest], [chmod +x redigest]) +AC_CONFIG_FILES([series2epatch], [chmod +x series2epatch]) +AC_CONFIG_FILES([sunrise-commit.1], [chmod +x sunrise-commit.1]) +AC_CONFIG_FILES([sunrise-commit], [chmod +x sunrise-commit]) AC_OUTPUT diff --git a/distclean-0.3.py.in b/distclean-0.3.py.in new file mode 100644 index 0000000..6a77085 --- /dev/null +++ b/distclean-0.3.py.in @@ -0,0 +1,90 @@ +#!/usr/bin/env python +## distclean.py version 0.3 (4 Jan 2009) +## +## Removes source files for Gentoo +## packages that are no longer installed +## Use with '-p' (pretend) flag to just get a list of files +## that would be removed +## +## 0.1: Aug 20, 2003 - first version with version number +## 0.2: Jan 11, 2005 - fixes by Emil Beinroth +## 0.3: Jan 04, 2009 - portage API changed, fixed by Jan Narovec +## +## Copyright (c) 2003, Fredrik Arnerup (e97_far@e.kth.se) +## All rights reserved. +## +## Redistribution and use in source and binary forms, with or without +## modification, are permitted provided that the following conditions are met: +## +## * Redistributions of source code must retain the above copyright notice, +## this list of conditions and the following disclaimer. +## +## * Redistributions in binary form must reproduce the above copyright +## notice, this list of conditions and the following disclaimer in the +## documentation and/or other materials provided with the distribution. +## +## THIS SOFTWARE IS PROVIDED BY FREDRIK ARNERUP "AS IS" AND ANY +## EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +## WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +## DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE +## FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +## DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +## SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +## CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +## LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +## OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH +## DAMAGE. + +import sys, os, os.path, getopt, portage + +opt_p = 0 +try: + if len(sys.argv) > 1: + opt_p = getopt.getopt(sys.argv[1:], 'p')[0][0][0] == '-p' +except getopt.GetoptError: + pass + +distdir = portage.settings['DISTDIR'] +print 'DISTDIR =', distdir + +vartree = portage.db['/']['vartree'] +packages = [] +for name in vartree.getallnodes(): + packages.extend(vartree.dep_match(name)) + +files = {} +for package in packages: + try: + package_files = portage.portdb.getFetchMap(package).keys() + for filename in package_files: + files[filename] = 1 + except: + print 'Failed to get file list for', package + +if not files: + sys.exit("No package files found. This can't be right.\n") + +try: + list = portage.listdir(distdir) +except os.OSError: + sys.exit('Failed to read ' + distdir) + +size = 0; count = 0 +for file in list: + abs_file = distdir + '/' + file + if (os.path.isfile(abs_file) and (not os.path.islink(abs_file)) + and (not file in files)): + size += os.stat(abs_file).st_size + count += 1 + if opt_p: + print 'Would remove', abs_file + else: + try: + os.remove(abs_file) + print 'Removed', abs_file + except OSError: + print 'Failed to remove', abs_file + + +size /= 1048576 ## MB +print '%i files, total size: %i MB' % (count, size) diff --git a/install-sh b/install-sh new file mode 100755 index 0000000..6781b98 --- /dev/null +++ b/install-sh @@ -0,0 +1,520 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2009-04-28.21; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +nl=' +' +IFS=" "" $nl" + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= + +src= +dst= +dir_arg= +dst_arg= + +copy_on_change=false +no_target_directory= + +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) ;; + + -C) copy_on_change=true;; + + -d) dir_arg=true;; + + -g) chgrpcmd="$chgrpprog $2" + shift;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; + + -o) chowncmd="$chownprog $2" + shift;; + + -s) stripcmd=$stripprog;; + + -t) dst_arg=$2 + shift;; + + -T) no_target_directory=true;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac + shift +done + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + trap '(exit $?); exit' 1 2 13 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dst_arg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + -*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir + shift + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test -z "$d" && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/lfspatch.in b/lfspatch.in new file mode 100644 index 0000000..ffb0365 --- /dev/null +++ b/lfspatch.in @@ -0,0 +1,200 @@ +#!/bin/bash + +# This script will generate a patch with the appropriate LFS header +# +# Asumptions +# +# * The script assumes that you have two directories +# One for the unmodified and one modified +# Examples: zoo-2.10 and zoo-2.10.orig +# The .orig is unmodified +# +# or +# The script assums that you have two files +# One for the umodified and one modified +# Examples: config.h and config.h.orig +# The .orig is unmodified +# +# * It assumes that this is a first release patch and +# adds -1 to end of the patch. Unless you specify the +# third option +# +# Script depends on the following programs that are not standard with +# LFS (See BLFS for installation) +# * nail +# * which +# +# This script also create a blank header that will need to be edited +# with the Initial Package Version:, Origin: , and Description: of +# the patch +# +# See ChangeLog at the end for credits. +# + +# Input Check +# +dir="$1" +type="$2" +version="$3" + +if [ "$dir" == "" ] || [ "$type" == "" ] + then + echo "Info: @PACKAGE_STRING@" + echo "" + echo "The command below will create a patch." + echo "$0 directory description version" + echo "or" + echo "The command below will allow you to submit the patch." + echo "$0 submit" + exit +fi + +if [ "$version" == "" ] + then + version="1" +fi + +rm -f /tmp/patch.mail /tmp/file.list /tmp/file.list.new + +date="`date +%F`" + +if [ -e ~/.go-patch ] + then + . ~/.go-patch +else +cat < ~/.go-patch +# Variables +# +submitter="Your Name" +email="your@email.address" +patches="patches@disconnected-by-peer.at" + + +# If you want the script to submit your patches +# You will need to specify the mailer program +# +# Currently the script only works with nail and mail +# +SUBMIT_PATCH="disabled" + +# Enter name of Mail Program +mailprog="mail" + +# Enter name of Editor +editorprog="mcedit" + +# If you want the script to be compressed +# +COMPRESS="disabled" + +EOF + echo "Please modifiy the config ~/.go-patch file to your needs" + exit 1 +fi + +# Enter name of compressing program +compressprog="bzip2" +compressext="bz2" + +# Do not edit this +mailbin="`which $mailprog`" +editorbin="`which $editorprog`" +compressbin="`which $compressprog`" + +# Subroutines +# +YESNO () +{ + INPUT="$1" + echo -n "$INPUT -=>" + RETURN="0" + read input + if [ "$input" == "YES" ] || [ "$input" == "yes" ] || [ "$input" == "Y" ] || [ "$input" == "y" ] + then + OK="YES" + RETURN="1" + fi + if [ "$input" == "NO" ] || [ "$input" == "no" ] || [ "$input" == "N" ] || [ "$input" == "n" ] + then + OK="NO" + RETURN="1" + fi + if [ "$RETURN" == "0" ] + then + YESNO "$INPUT" + fi +} + +# Parse Email +# +emailobfuscated="`echo $email|sed -e s%'@'%' at '% -e s%'\.'%' dot '%g`" + +# Create Patch Header +# +echo "Submitted By: $submitter ($emailobfuscated)" > $dir-$type-$version.patch +echo "Date: $date" >> $dir-$type-$version.patch +echo "Initial Package Version: " >> $dir-$type-$version.patch +echo "Origin: " >> $dir-$type-$version.patch +echo "Upstream Status: " >> $dir-$type-$version.patch +echo "Description: " >> $dir-$type-$version.patch +echo " " >> $dir-$type-$version.patch + +# Lets edit the patch Header +# +$editorbin $dir-$type-$version.patch + +# Copy the patch header for email text +# +cp $dir-$type-$version.patch /tmp/patch.mail + +# Check for directory.orig first if not there check all files in the current directory +# +if [ -e $dir.orig ] + then + # Create Patch from directory.orig directory + # + echo "Creating patch from directory $dir.." + LC_ALL=C TZ=UTC0 diff -Naur $dir.orig $dir >> $dir-$type-$version.patch + else + # Create Patch from file.orig file + # + find $dir/ -type f > /tmp/file.list + cat /tmp/file.list | grep ".orig" > /tmp/file.list.new + sed -e 's|.orig| |g' /tmp/file.list.new > /tmp/file.list + file_list="`cat /tmp/file.list`" + for file in $file_list + do + echo "Creating patch from file $file.." + LC_ALL=C TZ=UTC0 diff -Naur $file.orig $file >> $dir-$type-$version.patch + done +fi + +rm -f /tmp/file.list /tmp/file.list.new + +if [ "$SUBMIT_PATCH" == "enabled" ] && [ "$mailbin" != "" ] && [ "$email" != "" ] + then + YESNO "Are you sure you want to send $dir-$type-$version to $patches (yes/no)" + if [ "$OK" == "YES" ] + then + if [ "$COMPRESS" == "enabled" ] + then + echo "Compressing $dir-$type-$version.patch..." + $compressbin $dir-$type-$version.patch + attachment="$dir-$type-$version.patch.$compressext" + else + attachment="$dir-$type-$version.patch" + fi + echo "Sending email to $patches..." + $mailbin -B -s "Patch Submission for $dir" -a $attachment -r $email $patches < /tmp/patch.mail + fi +fi +rm -f /tmp/patch.mail $dir-$type-$version.patch.$compressext /tmp/file.list /tmp/file.list.new + + # ChangeLog: + # [2003-10-06] + # * Initial Version (Jim Gifford) + # [2003-10-16] + # * Fixed typo in submission e-mail address (Ronald Hummelink) + # * Fixed e-mail obfuscation to handle more than one "." (Ronald Hummelink) + # [2004-05-04] + # * Added Upstream Status Header (Jim Gifford) diff --git a/m4/definedir.m4 b/m4/definedir.m4 new file mode 100644 index 0000000..a62ed25 --- /dev/null +++ b/m4/definedir.m4 @@ -0,0 +1,14 @@ +dnl Available from the GNU Autoconf Macro Archive at: +dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_define_dir.html +dnl +AC_DEFUN([AC_DEFINE_DIR], [ + test "x$prefix" = xNONE && prefix="$ac_default_prefix" + test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + ac_define_dir=`eval echo [$]$2` + ac_define_dir=`eval echo [$]ac_define_dir` + $1="$ac_define_dir" + AC_SUBST($1) + ifelse($3, , + AC_DEFINE_UNQUOTED($1, "$ac_define_dir"), + AC_DEFINE_UNQUOTED($1, "$ac_define_dir", $3)) +]) diff --git a/missing b/missing new file mode 100755 index 0000000..28055d2 --- /dev/null +++ b/missing @@ -0,0 +1,376 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. + +scriptversion=2009-04-28.21; # UTC + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, +# 2008, 2009 Free Software Foundation, Inc. +# Originally by Fran,cois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: +sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +sed_minuso='s/.* -o \([^ ]*\).*/\1/p' + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case $1 in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + autom4te touch the output file, or create a stub one + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and +\`g' are ignored when checking the name. + +Send bug reports to ." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + +esac + +# normalize program name to check for. +program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). This is about non-GNU programs, so use $1 not +# $program. +case $1 in + lex*|yacc*) + # Not GNU programs, they don't have --version. + ;; + + tar*) + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + exit 1 + fi + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case $program in + aclocal*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case $f in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te*) + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison*|yacc*) + echo 1>&2 "\ +WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if test $# -ne 1; then + eval LASTARG="\${$#}" + case $LASTARG in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if test ! -f y.tab.h; then + echo >y.tab.h + fi + if test ! -f y.tab.c; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex*|flex*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if test $# -ne 1; then + eval LASTARG="\${$#}" + case $LASTARG in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if test ! -f lex.yy.c; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit $? + fi + ;; + + makeinfo*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + # The file to touch is that specified with -o ... + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -z "$file"; then + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n ' + /^@setfilename/{ + s/.* \([^ ]*\) *$/\1/ + p + q + }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info + fi + # If the file does not exist, the user really needs makeinfo; + # let's fail without touching anything. + test -f $file || exit 1 + touch $file + ;; + + tar*) + shift + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar "$@" && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar "$@" && exit 0 + fi + firstarg="$1" + if shift; then + case $firstarg in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + case $firstarg in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + fi + + echo 1>&2 "\ +WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/oneelf.rb.in b/oneelf.rb.in new file mode 100644 index 0000000..a20aee9 --- /dev/null +++ b/oneelf.rb.in @@ -0,0 +1,19 @@ +#!/usr/bin/ruby -w + +# Licensed under GPL-2 or later +# Author: Petteri Räty + +$: << File.dirname(__FILE__) +require "@LIBDIR@/@PACKAGE@/go-pkgutil.rb" + +elf = ARGV[0] + +if ! elf || ! is_elf(elf) + $stderr.puts 'This program takes one arguments that should be an elf file.' + exit 1 +end + +run_scanelf(elf) do | lib | + puts lib + puts "\t" + get_pkg_of_lib(lib) +end \ No newline at end of file diff --git a/pkgutil.rb.in b/pkgutil.rb.in new file mode 100644 index 0000000..12f0385 --- /dev/null +++ b/pkgutil.rb.in @@ -0,0 +1,60 @@ +# Licensed under GPL-2 or later +# Author: Petteri Räty + +MAGIC="\x7FELF" +def is_elf(file) + File.executable?(file) && File.file?(file) && File.read(file, 4) == MAGIC +end + +def get_pkg_of_lib(lib) + command='qfile -qC ' + lib + output = `#{command}`.split("\n") + output.uniq! + output.join(' || ') +end + +def handle_extra_output(prog) + $stderr.puts 'This program expects only one line' + $stderr.puts 'of output from scanelf. Extra lines:' + while line = scanelf.gets + $stderr.puts line + end + exit 2 +end + +def run_scanelf(elf) + scanelf = IO.popen("scanelf -q -F '%n#F' #{elf}") + first_line = scanelf.gets + handle_extra_output(scanelf) if not scanelf.eof? + scanelf.close + + libs = first_line.split(',') + for lib in libs + yield lib + end +end + +class ScanElf + private_class_method :new + @@instance = nil + + def ScanElf.instance + @@instance = new unless @@instance + @@instance + end + + def initialize + @process = IO.popen('scanelf -q -F "%n#F" -f /dev/stdin','r+') + end + + def each(elf) + @process.puts(elf) + result = @process.gets + + libs = result.split(',') + for lib in libs + yield lib + end + end +end + \ No newline at end of file diff --git a/redigest.in b/redigest.in new file mode 100644 index 0000000..3a5850b --- /dev/null +++ b/redigest.in @@ -0,0 +1,7 @@ +#!/bin/sh + +EBUILD=`find ${PWD} -type f -name '*.ebuild'` + +for J in $EBUILD ; do + ebuild $J digest +done \ No newline at end of file diff --git a/series2epatch.in b/series2epatch.in new file mode 100644 index 0000000..983bdf8 --- /dev/null +++ b/series2epatch.in @@ -0,0 +1,64 @@ +#! /bin/sh +# +# Copyright (C) 2003, 2005-2007 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU Library General Public License as published +# by the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU Library General Public +# License along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, +# USA. +# + + case "$0" in + series2epatch | */series2epatch | *\\series2epatch) + progname=$0 + package=series2epatch + version=@VERSION@ + # func_usage + # outputs to stdout the --help usage message. + func_usage () + { + echo "series2epatch shell script version $version" + echo "Usage: . series2epatch " + } + # func_version + # outputs to stdout the --version message. + func_version () + { + echo "$progname (GNU $package) $version" + echo "Copyright (C) 2003-2007 Free Software Foundation, Inc. +License GPLv2+: GNU GPL version 2 or later +This is free software: you are free to change and redistribute it. +There is NO WARRANTY, to the extent permitted by law." + echo "Written by" "Mario Fetka" + } + if test $# = 1; then + case "$1" in + --help | --hel | --he | --h ) + func_usage; exit 0 ;; + --version | --versio | --versi | --vers | --ver | --ve | --v ) + func_version; exit 0 ;; + esac + fi + func_usage 1>&2 + exit 1 + ;; + esac + +sed -e '/^#/d' -i $2/series + +cnt=$1 +for f in $(<$2/series) ; do + cp $2/${f} $3/${cnt}_${f} + ((cnt++)) +done + diff --git a/sunrise-commit.1.in b/sunrise-commit.1.in index 0faf80a..75e4c1b 100644 --- a/sunrise-commit.1.in +++ b/sunrise-commit.1.in @@ -1,19 +1,19 @@ -.TH SUNRISE-COMMIT 1 "13 Jul 2010" "@PACKAGE_STRING@" "User Commands" +.TH GO-COMMIT 1 "13 Jul 2010" "@PACKAGE_STRING@" "User Commands" .SH NAME -sunrise-commit \- a Gentoo repository commit helper. +go-commit \- a Gentoo repository commit helper. .SH SYNOPSIS -.B sunrise-commit +.B go-commit [options] [--] .I .SH DESCRIPTION -.B sunrise-commit +.B go-commit is a helper script for Gentoo repository commiters. Apart from performing the actual commit, it performs the following tasks: @@ -95,7 +95,7 @@ Print the version string and exit. .IP ECHANGELOG_USER the committer name and e-mail as it would appear in ChangeLog. -The sunrise-suggested format is: +The go-suggested format is: .IR "Real Name" " (" nickname ") <" e-mail > @@ -105,7 +105,7 @@ The sunrise-suggested format is: .IP "Adding and Updating Packages" -The primary use of \fBsunrise-commit\fP is to add packages to a Gentoo +The primary use of \fBgo-commit\fP is to add packages to a Gentoo repository or update existing packages. In order to use it this way, you are expected to run it from within the package's directory, providing an appropriate changelog message. (The package's directory @@ -113,9 +113,9 @@ is the directory holding its ebuilds). If your package requires an additional file to be committed outside the package directory (e.g. an eclass, a license), then you need to -commit that file manually \fBbefore\fP using \fBsunrise-commit\fP. +commit that file manually \fBbefore\fP using \fBgo-commit\fP. -\fBsunrise-commit\fP will update the ChangeLog entry and call +\fBgo-commit\fP will update the ChangeLog entry and call .BR repoman (1) to do the actual commit for you. If the package's ChangeLog should \fBnot\fP be updated for a particular commit, use \fB--trivial\fP. @@ -124,17 +124,17 @@ If you are adding a new package and using subversion or a similar VCS, you may get a warning that your VCS's update command failed. For example, subversion's update command fails when run from a newly added, but not yet committed, directory. To avoid this warning, you may use -\fB--noupdate\fP. This option prevents \fBsunrise-commit\fP from calling the +\fB--noupdate\fP. This option prevents \fBgo-commit\fP from calling the VCS's update command (which only happens if you are not using DVCS). .IP "Removing Packages" -\fBsunrise-commit\fP can be used to remove a set of packages too. In order to +\fBgo-commit\fP can be used to remove a set of packages too. In order to do so, first mark all the expected packages as removed using your VCS. Next, perform the necessary \fBpackage.mask\fP changes and remove licenses no longer in use. -Afterwards, call \fBsunrise-commit\fP from within your repository's root +Afterwards, call \fBgo-commit\fP from within your repository's root directory, passing the removal reason as an argument. The script will prepend your commit message with the complete removed package list. @@ -144,7 +144,7 @@ atomic package removal commit, where \fBpackage.mask\fP entries and files used only by the removed packages are removed. However, this can cause trouble if the working copy is dirty. -\fBsunrise-commit\fP will check whether any removed package is still +\fBgo-commit\fP will check whether any removed package is still referenced by any of the other packages by default. If it finds an internal package reference, it will give an error message. This is in order to ensure that no package will be left with unsatisfied @@ -165,7 +165,7 @@ $ svn mkdir app-foo/bar $ cd app-foo/bar [...] $ svn add bar-1.ebuild -$ sunrise-commit 'New ebuild for bug #nnnnnn.' +$ go-commit 'New ebuild for bug #nnnnnn.' .fi .I "2. Performing a version bump:" @@ -174,23 +174,23 @@ $ sunrise-commit 'New ebuild for bug #nnnnnn.' $ cd app-foo/bar $ svn mv bar-1.ebuild bar-2.ebuild [...] -$ sunrise-commit 'Version bump.' +$ go-commit 'Version bump.' .fi .I "3. Fixing a broken Manifest:" .nf $ cd app-foo/bar -$ sunrise-commit -t 'Fixing a broken Manifest.' +$ go-commit -t 'Fixing a broken Manifest.' .fi -(\fBsunrise-commit\fP always updates the Manifest) +(\fBgo-commit\fP always updates the Manifest) .I "4. Removing a package which was added to gx86:" .nf $ svn rm app-foo/bar -$ sunrise-commit -f 'in gx86.' +$ go-commit -f 'in gx86.' .fi .SH "REPORTING BUGS" diff --git a/sunrise-commit.in b/sunrise-commit.in old mode 100755 new mode 100644 index ba5ebf1..877e53b --- a/sunrise-commit.in +++ b/sunrise-commit.in @@ -1,5 +1,5 @@ #!/bin/sh -# sunrise-commit -- a Gentoo repository commit helper +# go-commit -- a Gentoo repository commit helper # (c) 2010 Michał Górny # Released under the terms of the 3-clause BSD license. @@ -279,7 +279,7 @@ vcs_update() { print_help() { cat <<_EOH_ Synopsis: - sunrise-commit [options] [--] + go-commit [options] [--] Options: -?, -h, --help print this message, @@ -423,8 +423,8 @@ main() { if [ ! -f ChangeLog ]; then [ -n "${trivial}" ] && die "Trivial change for an initial commit? You're joking, right?" - # Sunrise-specific checks. - if [ "$(cat ../../profiles/repo_name 2>/dev/null)" = "sunrise" ]; then + # Geos_One-specific checks. + if [ "$(cat ../../profiles/repo_name 2>/dev/null)" = "go" ]; then [ -z "${bns}" ] && die 'Please supply the bug number in the initial commit message!' if [ ! -f metadata.xml ]; then req cp ../../skel.metadata.xml metadata.xml