diff --git a/README.txt b/README.txt new file mode 100644 index 00000000..c93ca33f --- /dev/null +++ b/README.txt @@ -0,0 +1,5 @@ +This is a Subversion repository; use the 'svnadmin' tool to examine +it. Do not add, delete, or modify files here unless you know how +to avoid corrupting the repository. + +Visit http://subversion.tigris.org/ for more information. diff --git a/conf/authz b/conf/authz new file mode 100644 index 00000000..3407445f --- /dev/null +++ b/conf/authz @@ -0,0 +1,21 @@ +### This file is an example authorization file for svnserve. +### Its format is identical to that of mod_authz_svn authorization +### files. +### As shown below each section defines authorizations for the path and +### (optional) repository specified by the section name. +### The authorizations follow. An authorization line can refer to a +### single user, to a group of users defined in a special [groups] +### section, or to anyone using the '*' wildcard. Each definition can +### grant read ('r') access, read-write ('rw') access, or no access +### (''). + +[groups] +# harry_and_sally = harry,sally + +# [/foo/bar] +# harry = rw +# * = + +# [repository:/baz/fuz] +# @harry_and_sally = rw +# * = r diff --git a/conf/passwd b/conf/passwd new file mode 100644 index 00000000..d22bafc5 --- /dev/null +++ b/conf/passwd @@ -0,0 +1,8 @@ +### This file is an example password file for svnserve. +### Its format is similar to that of svnserve.conf. As shown in the +### example below it contains one section labelled [users]. +### The name and password for each user follow, one account per line. + +[users] +# harry = harryssecret +# sally = sallyssecret diff --git a/conf/svnserve.conf b/conf/svnserve.conf new file mode 100644 index 00000000..089b0d0e --- /dev/null +++ b/conf/svnserve.conf @@ -0,0 +1,30 @@ +### This file controls the configuration of the svnserve daemon, if you +### use it to allow access to this repository. (If you only allow +### access through http: and/or file: URLs, then this file is +### irrelevant.) + +### Visit http://subversion.tigris.org/ for more information. + +[general] +### These options control access to the repository for unauthenticated +### and authenticated users. Valid values are "write", "read", +### and "none". The sample settings below are the defaults. +# anon-access = read +# auth-access = write +### The password-db option controls the location of the password +### database file. Unless you specify a path starting with a /, +### the file's location is relative to the conf directory. +### Uncomment the line below to use the default password file. +# password-db = passwd +### The authz-db option controls the location of the authorization +### rules for path-based access control. Unless you specify a path +### starting with a /, the file's location is relative to the conf +### directory. If you don't specify an authz-db, no path-based access +### control is done. +### Uncomment the line below to use the default authorization file. +# authz-db = authz +### This option specifies the authentication realm of the repository. +### If two repositories have the same authentication realm, they should +### have the same password database, and vice versa. The default realm +### is repository's uuid. +# realm = My First Repository diff --git a/db/current b/db/current new file mode 100644 index 00000000..c435b766 --- /dev/null +++ b/db/current @@ -0,0 +1 @@ +0 1 1 diff --git a/db/format b/db/format new file mode 100644 index 00000000..0cfbf088 --- /dev/null +++ b/db/format @@ -0,0 +1 @@ +2 diff --git a/db/fs-type b/db/fs-type new file mode 100644 index 00000000..4fdd9531 --- /dev/null +++ b/db/fs-type @@ -0,0 +1 @@ +fsfs diff --git a/db/revprops/0 b/db/revprops/0 new file mode 100644 index 00000000..9a39d249 --- /dev/null +++ b/db/revprops/0 @@ -0,0 +1,5 @@ +K 8 +svn:date +V 27 +2007-11-24T18:32:46.562044Z +END diff --git a/db/revs/0 b/db/revs/0 new file mode 100644 index 00000000..10f5c45f --- /dev/null +++ b/db/revs/0 @@ -0,0 +1,11 @@ +PLAIN +END +ENDREP +id: 0.0.r0/17 +type: dir +count: 0 +text: 0 0 4 4 2d2977d1c96f487abe4a1e202dd03b4e +cpath: / + + +17 107 diff --git a/db/uuid b/db/uuid new file mode 100644 index 00000000..864f6d81 --- /dev/null +++ b/db/uuid @@ -0,0 +1 @@ +2eeb2e83-ebf0-1744-a16b-6485bf259976 diff --git a/db/write-lock b/db/write-lock new file mode 100644 index 00000000..e69de29b diff --git a/format b/format new file mode 100644 index 00000000..7ed6ff82 --- /dev/null +++ b/format @@ -0,0 +1 @@ +5 diff --git a/hooks/post-commit.tmpl b/hooks/post-commit.tmpl new file mode 100644 index 00000000..c1bfc355 --- /dev/null +++ b/hooks/post-commit.tmpl @@ -0,0 +1,51 @@ +#!/bin/sh + +# POST-COMMIT HOOK +# +# The post-commit hook is invoked after a commit. Subversion runs +# this hook by invoking a program (script, executable, binary, etc.) +# named 'post-commit' (for which this file is a template) with the +# following ordered arguments: +# +# [1] REPOS-PATH (the path to this repository) +# [2] REV (the number of the revision just committed) +# +# The default working directory for the invocation is undefined, so +# the program should set one explicitly if it cares. +# +# Because the commit has already completed and cannot be undone, +# the exit code of the hook program is ignored. The hook program +# can use the 'svnlook' utility to help it examine the +# newly-committed tree. +# +# On a Unix system, the normal procedure is to have 'post-commit' +# invoke other programs to do the real work, though it may do the +# work itself too. +# +# Note that 'post-commit' must be executable by the user(s) who will +# invoke it (typically the user httpd runs as), and that user must +# have filesystem-level permission to access the repository. +# +# On a Windows system, you should name the hook program +# 'post-commit.bat' or 'post-commit.exe', +# but the basic idea is the same. +# +# The hook program typically does not inherit the environment of +# its parent process. For example, a common problem is for the +# PATH environment variable to not be set to its usual value, so +# that subprograms fail to launch unless invoked via absolute path. +# If you're having unexpected problems with a hook program, the +# culprit may be unusual (or missing) environment variables. +# +# Here is an example hook script, for a Unix /bin/sh interpreter. +# For more examples and pre-written hooks, see those in +# the Subversion repository at +# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and +# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/ + + +REPOS="$1" +REV="$2" + +commit-email.pl "$REPOS" "$REV" commit-watchers@example.org +log-commit.py --repository "$REPOS" --revision "$REV" diff --git a/hooks/post-lock.tmpl b/hooks/post-lock.tmpl new file mode 100644 index 00000000..65a7d40e --- /dev/null +++ b/hooks/post-lock.tmpl @@ -0,0 +1,44 @@ +#!/bin/sh + +# POST-LOCK HOOK +# +# The post-lock hook is run after a path is locked. Subversion runs +# this hook by invoking a program (script, executable, binary, etc.) +# named 'post-lock' (for which this file is a template) with the +# following ordered arguments: +# +# [1] REPOS-PATH (the path to this repository) +# [2] USER (the user who created the lock) +# +# The paths that were just locked are passed to the hook via STDIN (as +# of Subversion 1.2, only one path is passed per invocation, but the +# plan is to pass all locked paths at once, so the hook program +# should be written accordingly). +# +# The default working directory for the invocation is undefined, so +# the program should set one explicitly if it cares. +# +# Because the lock has already been created and cannot be undone, +# the exit code of the hook program is ignored. The hook program +# can use the 'svnlook' utility to help it examine the +# newly-created lock. +# +# On a Unix system, the normal procedure is to have 'post-lock' +# invoke other programs to do the real work, though it may do the +# work itself too. +# +# Note that 'post-lock' must be executable by the user(s) who will +# invoke it (typically the user httpd runs as), and that user must +# have filesystem-level permission to access the repository. +# +# On a Windows system, you should name the hook program +# 'post-lock.bat' or 'post-lock.exe', +# but the basic idea is the same. +# +# Here is an example hook script, for a Unix /bin/sh interpreter: + +REPOS="$1" +USER="$2" + +# Send email to interested parties, let them know a lock was created: +mailer.py lock "$REPOS" "$USER" /path/to/mailer.conf diff --git a/hooks/post-revprop-change.tmpl b/hooks/post-revprop-change.tmpl new file mode 100644 index 00000000..395201a9 --- /dev/null +++ b/hooks/post-revprop-change.tmpl @@ -0,0 +1,56 @@ +#!/bin/sh + +# POST-REVPROP-CHANGE HOOK +# +# The post-revprop-change hook is invoked after a revision property +# has been added, modified or deleted. Subversion runs this hook by +# invoking a program (script, executable, binary, etc.) named +# 'post-revprop-change' (for which this file is a template), with the +# following ordered arguments: +# +# [1] REPOS-PATH (the path to this repository) +# [2] REV (the revision that was tweaked) +# [3] USER (the username of the person tweaking the property) +# [4] PROPNAME (the property that was changed) +# [5] ACTION (the property was 'A'dded, 'M'odified, or 'D'eleted) +# +# [STDIN] PROPVAL ** the old property value is passed via STDIN. +# +# Because the propchange has already completed and cannot be undone, +# the exit code of the hook program is ignored. The hook program +# can use the 'svnlook' utility to help it examine the +# new property value. +# +# On a Unix system, the normal procedure is to have 'post-revprop-change' +# invoke other programs to do the real work, though it may do the +# work itself too. +# +# Note that 'post-revprop-change' must be executable by the user(s) who will +# invoke it (typically the user httpd runs as), and that user must +# have filesystem-level permission to access the repository. +# +# On a Windows system, you should name the hook program +# 'post-revprop-change.bat' or 'post-revprop-change.exe', +# but the basic idea is the same. +# +# The hook program typically does not inherit the environment of +# its parent process. For example, a common problem is for the +# PATH environment variable to not be set to its usual value, so +# that subprograms fail to launch unless invoked via absolute path. +# If you're having unexpected problems with a hook program, the +# culprit may be unusual (or missing) environment variables. +# +# Here is an example hook script, for a Unix /bin/sh interpreter. +# For more examples and pre-written hooks, see those in +# the Subversion repository at +# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and +# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/ + + +REPOS="$1" +REV="$2" +USER="$3" +PROPNAME="$4" +ACTION="$5" + +propchange-email.pl "$REPOS" "$REV" "$USER" "$PROPNAME" watchers@example.org diff --git a/hooks/post-unlock.tmpl b/hooks/post-unlock.tmpl new file mode 100644 index 00000000..5821be83 --- /dev/null +++ b/hooks/post-unlock.tmpl @@ -0,0 +1,42 @@ +#!/bin/sh + +# POST-UNLOCK HOOK +# +# The post-unlock hook runs after a path is unlocked. Subversion runs +# this hook by invoking a program (script, executable, binary, etc.) +# named 'post-unlock' (for which this file is a template) with the +# following ordered arguments: +# +# [1] REPOS-PATH (the path to this repository) +# [2] USER (the user who destroyed the lock) +# +# The paths that were just unlocked are passed to the hook via STDIN +# (as of Subversion 1.2, only one path is passed per invocation, but +# the plan is to pass all unlocked paths at once, so the hook program +# should be written accordingly). +# +# The default working directory for the invocation is undefined, so +# the program should set one explicitly if it cares. +# +# Because the lock has already been destroyed and cannot be undone, +# the exit code of the hook program is ignored. +# +# On a Unix system, the normal procedure is to have 'post-unlock' +# invoke other programs to do the real work, though it may do the +# work itself too. +# +# Note that 'post-unlock' must be executable by the user(s) who will +# invoke it (typically the user httpd runs as), and that user must +# have filesystem-level permission to access the repository. +# +# On a Windows system, you should name the hook program +# 'post-unlock.bat' or 'post-unlock.exe', +# but the basic idea is the same. +# +# Here is an example hook script, for a Unix /bin/sh interpreter: + +REPOS="$1" +USER="$2" + +# Send email to interested parties, let them know a lock was removed: +mailer.py unlock "$REPOS" "$USER" /path/to/mailer.conf diff --git a/hooks/pre-commit.tmpl b/hooks/pre-commit.tmpl new file mode 100644 index 00000000..4ac8669e --- /dev/null +++ b/hooks/pre-commit.tmpl @@ -0,0 +1,70 @@ +#!/bin/sh + +# PRE-COMMIT HOOK +# +# The pre-commit hook is invoked before a Subversion txn is +# committed. Subversion runs this hook by invoking a program +# (script, executable, binary, etc.) named 'pre-commit' (for which +# this file is a template), with the following ordered arguments: +# +# [1] REPOS-PATH (the path to this repository) +# [2] TXN-NAME (the name of the txn about to be committed) +# +# The default working directory for the invocation is undefined, so +# the program should set one explicitly if it cares. +# +# If the hook program exits with success, the txn is committed; but +# if it exits with failure (non-zero), the txn is aborted, no commit +# takes place, and STDERR is returned to the client. The hook +# program can use the 'svnlook' utility to help it examine the txn. +# +# On a Unix system, the normal procedure is to have 'pre-commit' +# invoke other programs to do the real work, though it may do the +# work itself too. +# +# *** NOTE: THE HOOK PROGRAM MUST NOT MODIFY THE TXN, EXCEPT *** +# *** FOR REVISION PROPERTIES (like svn:log or svn:author). *** +# +# This is why we recommend using the read-only 'svnlook' utility. +# In the future, Subversion may enforce the rule that pre-commit +# hooks should not modify the versioned data in txns, or else come +# up with a mechanism to make it safe to do so (by informing the +# committing client of the changes). However, right now neither +# mechanism is implemented, so hook writers just have to be careful. +# +# Note that 'pre-commit' must be executable by the user(s) who will +# invoke it (typically the user httpd runs as), and that user must +# have filesystem-level permission to access the repository. +# +# On a Windows system, you should name the hook program +# 'pre-commit.bat' or 'pre-commit.exe', +# but the basic idea is the same. +# +# The hook program typically does not inherit the environment of +# its parent process. For example, a common problem is for the +# PATH environment variable to not be set to its usual value, so +# that subprograms fail to launch unless invoked via absolute path. +# If you're having unexpected problems with a hook program, the +# culprit may be unusual (or missing) environment variables. +# +# Here is an example hook script, for a Unix /bin/sh interpreter. +# For more examples and pre-written hooks, see those in +# the Subversion repository at +# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and +# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/ + + +REPOS="$1" +TXN="$2" + +# Make sure that the log message contains some text. +SVNLOOK=/usr/local/bin/svnlook +$SVNLOOK log -t "$TXN" "$REPOS" | \ + grep "[a-zA-Z0-9]" > /dev/null || exit 1 + +# Check that the author of this commit has the rights to perform +# the commit on the files and directories being modified. +commit-access-control.pl "$REPOS" "$TXN" commit-access-control.cfg || exit 1 + +# All checks passed, so allow the commit. +exit 0 diff --git a/hooks/pre-lock.tmpl b/hooks/pre-lock.tmpl new file mode 100644 index 00000000..f4c43d25 --- /dev/null +++ b/hooks/pre-lock.tmpl @@ -0,0 +1,64 @@ +#!/bin/sh + +# PRE-LOCK HOOK +# +# The pre-lock hook is invoked before an exclusive lock is +# created. Subversion runs this hook by invoking a program +# (script, executable, binary, etc.) named 'pre-lock' (for which +# this file is a template), with the following ordered arguments: +# +# [1] REPOS-PATH (the path to this repository) +# [2] PATH (the path in the repository about to be locked) +# [3] USER (the user creating the lock) +# +# The default working directory for the invocation is undefined, so +# the program should set one explicitly if it cares. +# +# If the hook program exits with success, the lock is created; but +# if it exits with failure (non-zero), the lock action is aborted +# and STDERR is returned to the client. + +# On a Unix system, the normal procedure is to have 'pre-lock' +# invoke other programs to do the real work, though it may do the +# work itself too. +# +# Note that 'pre-lock' must be executable by the user(s) who will +# invoke it (typically the user httpd runs as), and that user must +# have filesystem-level permission to access the repository. +# +# On a Windows system, you should name the hook program +# 'pre-lock.bat' or 'pre-lock.exe', +# but the basic idea is the same. +# +# Here is an example hook script, for a Unix /bin/sh interpreter: + +REPOS="$1" +PATH="$2" +USER="$3" + +# If a lock exists and is owned by a different person, don't allow it +# to be stolen (e.g., with 'svn lock --force ...'). + +# (Maybe this script could send email to the lock owner?) +SVNLOOK=/usr/local/bin/svnlook +GREP=/bin/grep +SED=/bin/sed + +LOCK_OWNER=`$SVNLOOK lock "$REPOS" "$PATH" | \ + $GREP '^Owner: ' | $SED 's/Owner: //'` + +# If we get no result from svnlook, there's no lock, allow the lock to +# happen: +if [ "$LOCK_OWNER" = "" ]; then + exit 0 +fi + +# If the person locking matches the lock's owner, allow the lock to +# happen: +if [ "$LOCK_OWNER" = "$USER" ]; then + exit 0 +fi + +# Otherwise, we've got an owner mismatch, so return failure: +echo "Error: $PATH already locked by ${LOCK_OWNER}." 1>&2 +exit 1 diff --git a/hooks/pre-revprop-change.tmpl b/hooks/pre-revprop-change.tmpl new file mode 100644 index 00000000..9e284a91 --- /dev/null +++ b/hooks/pre-revprop-change.tmpl @@ -0,0 +1,66 @@ +#!/bin/sh + +# PRE-REVPROP-CHANGE HOOK +# +# The pre-revprop-change hook is invoked before a revision property +# is added, modified or deleted. Subversion runs this hook by invoking +# a program (script, executable, binary, etc.) named 'pre-revprop-change' +# (for which this file is a template), with the following ordered +# arguments: +# +# [1] REPOS-PATH (the path to this repository) +# [2] REVISION (the revision being tweaked) +# [3] USER (the username of the person tweaking the property) +# [4] PROPNAME (the property being set on the revision) +# [5] ACTION (the property is being 'A'dded, 'M'odified, or 'D'eleted) +# +# [STDIN] PROPVAL ** the new property value is passed via STDIN. +# +# If the hook program exits with success, the propchange happens; but +# if it exits with failure (non-zero), the propchange doesn't happen. +# The hook program can use the 'svnlook' utility to examine the +# existing value of the revision property. +# +# WARNING: unlike other hooks, this hook MUST exist for revision +# properties to be changed. If the hook does not exist, Subversion +# will behave as if the hook were present, but failed. The reason +# for this is that revision properties are UNVERSIONED, meaning that +# a successful propchange is destructive; the old value is gone +# forever. We recommend the hook back up the old value somewhere. +# +# On a Unix system, the normal procedure is to have 'pre-revprop-change' +# invoke other programs to do the real work, though it may do the +# work itself too. +# +# Note that 'pre-revprop-change' must be executable by the user(s) who will +# invoke it (typically the user httpd runs as), and that user must +# have filesystem-level permission to access the repository. +# +# On a Windows system, you should name the hook program +# 'pre-revprop-change.bat' or 'pre-revprop-change.exe', +# but the basic idea is the same. +# +# The hook program typically does not inherit the environment of +# its parent process. For example, a common problem is for the +# PATH environment variable to not be set to its usual value, so +# that subprograms fail to launch unless invoked via absolute path. +# If you're having unexpected problems with a hook program, the +# culprit may be unusual (or missing) environment variables. +# +# Here is an example hook script, for a Unix /bin/sh interpreter. +# For more examples and pre-written hooks, see those in +# the Subversion repository at +# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and +# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/ + + +REPOS="$1" +REV="$2" +USER="$3" +PROPNAME="$4" +ACTION="$5" + +if [ "$ACTION" = "M" -a "$PROPNAME" = "svn:log" ]; then exit 0; fi + +echo "Changing revision properties other than svn:log is prohibited" >&2 +exit 1 diff --git a/hooks/pre-unlock.tmpl b/hooks/pre-unlock.tmpl new file mode 100644 index 00000000..1298e805 --- /dev/null +++ b/hooks/pre-unlock.tmpl @@ -0,0 +1,60 @@ +#!/bin/sh + +# PRE-UNLOCK HOOK +# +# The pre-unlock hook is invoked before an exclusive lock is +# destroyed. Subversion runs this hook by invoking a program +# (script, executable, binary, etc.) named 'pre-unlock' (for which +# this file is a template), with the following ordered arguments: +# +# [1] REPOS-PATH (the path to this repository) +# [2] PATH (the path in the repository about to be unlocked) +# [3] USER (the user destroying the lock) +# +# The default working directory for the invocation is undefined, so +# the program should set one explicitly if it cares. +# +# If the hook program exits with success, the lock is destroyed; but +# if it exits with failure (non-zero), the unlock action is aborted +# and STDERR is returned to the client. + +# On a Unix system, the normal procedure is to have 'pre-unlock' +# invoke other programs to do the real work, though it may do the +# work itself too. +# +# Note that 'pre-unlock' must be executable by the user(s) who will +# invoke it (typically the user httpd runs as), and that user must +# have filesystem-level permission to access the repository. +# +# On a Windows system, you should name the hook program +# 'pre-unlock.bat' or 'pre-unlock.exe', +# but the basic idea is the same. +# +# Here is an example hook script, for a Unix /bin/sh interpreter: + +REPOS="$1" +PATH="$2" +USER="$3" + +# If a lock is owned by a different person, don't allow it be broken. +# (Maybe this script could send email to the lock owner?) + +SVNLOOK=/usr/local/bin/svnlook +GREP=/bin/grep +SED=/bin/sed + +LOCK_OWNER=`$SVNLOOK lock "$REPOS" "$PATH" | \ + $GREP '^Owner: ' | $SED 's/Owner: //'` + +# If we get no result from svnlook, there's no lock, return success: +if [ "$LOCK_OWNER" = "" ]; then + exit 0 +fi +# If the person unlocking matches the lock's owner, return success: +if [ "$LOCK_OWNER" = "$USER" ]; then + exit 0 +fi + +# Otherwise, we've got an owner mismatch, so return failure: +echo "Error: $PATH locked by ${LOCK_OWNER}." 1>&2 +exit 1 diff --git a/hooks/start-commit.tmpl b/hooks/start-commit.tmpl new file mode 100644 index 00000000..e7707482 --- /dev/null +++ b/hooks/start-commit.tmpl @@ -0,0 +1,54 @@ +#!/bin/sh + +# START-COMMIT HOOK +# +# The start-commit hook is invoked before a Subversion txn is created +# in the process of doing a commit. Subversion runs this hook +# by invoking a program (script, executable, binary, etc.) named +# 'start-commit' (for which this file is a template) +# with the following ordered arguments: +# +# [1] REPOS-PATH (the path to this repository) +# [2] USER (the authenticated user attempting to commit) +# +# The default working directory for the invocation is undefined, so +# the program should set one explicitly if it cares. +# +# If the hook program exits with success, the commit continues; but +# if it exits with failure (non-zero), the commit is stopped before +# a Subversion txn is created, and STDERR is returned to the client. +# +# On a Unix system, the normal procedure is to have 'start-commit' +# invoke other programs to do the real work, though it may do the +# work itself too. +# +# Note that 'start-commit' must be executable by the user(s) who will +# invoke it (typically the user httpd runs as), and that user must +# have filesystem-level permission to access the repository. +# +# On a Windows system, you should name the hook program +# 'start-commit.bat' or 'start-commit.exe', +# but the basic idea is the same. +# +# The hook program typically does not inherit the environment of +# its parent process. For example, a common problem is for the +# PATH environment variable to not be set to its usual value, so +# that subprograms fail to launch unless invoked via absolute path. +# If you're having unexpected problems with a hook program, the +# culprit may be unusual (or missing) environment variables. +# +# Here is an example hook script, for a Unix /bin/sh interpreter. +# For more examples and pre-written hooks, see those in +# the Subversion repository at +# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and +# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/ + + +REPOS="$1" +USER="$2" + +commit-allower.pl --repository "$REPOS" --user "$USER" || exit 1 +special-auth-check.py --user "$USER" --auth-level 3 || exit 1 + +# All checks passed, so allow the commit. +exit 0 diff --git a/locks/db-logs.lock b/locks/db-logs.lock new file mode 100644 index 00000000..536ac36a --- /dev/null +++ b/locks/db-logs.lock @@ -0,0 +1,3 @@ +This file is not used by Subversion 1.3.x or later. +However, its existence is required for compatibility with +Subversion 1.2.x or earlier. diff --git a/locks/db.lock b/locks/db.lock new file mode 100644 index 00000000..536ac36a --- /dev/null +++ b/locks/db.lock @@ -0,0 +1,3 @@ +This file is not used by Subversion 1.3.x or later. +However, its existence is required for compatibility with +Subversion 1.2.x or earlier.