Add AssemblyInfo files to all .Net assemblies, with version 1.5

ClientPasswordManager/c-sharp-net-credential/AssemblyInfo.cs

@@ -10,8 +10,8 @@ using System.Runtime.CompilerServices;
 [assembly: AssemblyDescription("Implements the NetCredential class for Novell.Security.ClientPasswordManager")]
 [assembly: AssemblyConfiguration("")]
 [assembly: AssemblyCompany("Novell, Inc.")]
-[assembly: AssemblyProduct("")]
-[assembly: AssemblyCopyright("Copyright (C) 2004 Novell, Inc.")]
+[assembly: AssemblyProduct("CASA")]
+[assembly: AssemblyCopyright("")]
 [assembly: AssemblyTrademark("")]
 [assembly: AssemblyCulture("")]		
 
@@ -26,7 +26,7 @@ using System.Runtime.CompilerServices;
 // You can specify all the values or you can default the Revision and Build Numbers 
 // by using the '*' as shown below:
 
-[assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.5.*")]
 
 //
 // In order to sign your assembly you must specify a key to use. Refer to the 

ClientPasswordManager/c-sharp-utilities/AssemblyInfo.cs

@@ -11,7 +11,7 @@ using System.Runtime.CompilerServices;
 [assembly: AssemblyConfiguration("")]
 [assembly: AssemblyCompany("Novell, Inc.")]
 [assembly: AssemblyProduct("")]
-[assembly: AssemblyCopyright("Copyright (C) 2004 Novell, Inc.")]
+[assembly: AssemblyCopyright("")]
 [assembly: AssemblyTrademark("")]
 [assembly: AssemblyCulture("")]		
 
@@ -26,7 +26,7 @@ using System.Runtime.CompilerServices;
 // You can specify all the values or you can default the Revision and Build Numbers 
 // by using the '*' as shown below:
 
-[assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.5.*")]
 
 //
 // In order to sign your assembly you must specify a key to use. Refer to the 

c_adlib/AssemblyInfo.cs

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("Novell.CASA.A-D.dll")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("Novell, Inc")]
+[assembly: AssemblyProduct("CASA")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.5.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("")]
+[assembly: AssemblyKeyName("")]

c_adlib/Novell.CASA.A-D.csproj

@@ -139,6 +139,11 @@
                     SubType = "Code"
                     BuildAction = "Compile"
                 />
+                <File
+                    RelPath = "AssemblyInfo.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
                 <File
                     RelPath = "Common.cs"
                     SubType = "Code"

c_adlib/ad_gk/AssemblyInfo.cs

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("Novell.CASA.DataEngines.GnomeKeyring.dll")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("Novell, Inc")]
+[assembly: AssemblyProduct("CASA")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.5.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("")]
+[assembly: AssemblyKeyName("")]

c_adlib/ad_gk/objs.lux

@@ -1,2 +1,3 @@
 OBJS=\
+	AssembyInfo\
 	GnomeKeyring

c_adlib/ad_gk/src.lux

@@ -1,2 +1,3 @@
 SRC=\
+	AssemblyInfo.cs\
 	GnomeKeyring.cs

c_adlib/ad_kw/AssemblyInfo.cs

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("Novell.CASA.DataEngines.KWallet.dll")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("Novell, Inc")]
+[assembly: AssemblyProduct("CASA")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.5.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("")]
+[assembly: AssemblyKeyName("")]

c_adlib/ad_kw/objs.lux

@@ -1,3 +1,4 @@
 OBJS=\
+	AssemblyInfo\
 	KWalletEnum\
 	KWalletNative

c_adlib/ad_kw/src.lux

@@ -1,3 +1,4 @@
 SRC=\
+	AssemblyInfo.cs\
 	KWalletEnum.cs\
 	KWalletNative.cs

c_adlib/objs.lux

@@ -1,4 +1,5 @@
 OBJS=\
+	AssemblyInfo\
 	Common\
 	IDataEngine\
 	miCASAEngine\

c_adlib/src.lux

@@ -1,4 +1,5 @@
 SRC=\
+	AssemblyInfo.cs\
 	Common.cs\
 	IDataEngine.cs\
 	miCASAEngine.cs\

c_gui/AssemblyInfo.cs

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("CASAManager.exe")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("Novell, Inc")]
+[assembly: AssemblyProduct("CASA")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.5.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("")]
+[assembly: AssemblyKeyName("")]

c_gui/CASAManager.csproj

@@ -149,6 +149,11 @@
         </Build>
         <Files>
             <Include>
+                <File
+                    RelPath = "AssemblyInfo.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
                 <File
                     RelPath = "CasaMain.cs"
                     SubType = "Code"

c_gui/objs.lux

@@ -1,4 +1,5 @@
 OBJS=\
+	AssemblyInfo \
 	CasaMain \
 	CasaTray \
 	TrayLib \

c_gui/src.lux

@@ -1,4 +1,5 @@
 SRC=\
+	AssemblyInfo.cs \
 	CasaMain.cs \
 	CasaTray.cs \
 	TrayLib.cs \

c_micasad/AssemblyInfo.cs

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("micasad.exe")]
+[assembly: AssemblyDescription("CASA Identity Store")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("Novell, Inc")]
+[assembly: AssemblyProduct("CASA")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.5.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("")]
+[assembly: AssemblyKeyName("")]

c_micasad/lib/AssemblyInfo.cs

@@ -6,11 +6,11 @@ using System.Runtime.CompilerServices;
 // set of attributes. Change these attribute values to modify the information
 // associated with an assembly.
 //
-[assembly: AssemblyTitle("")]
+[assembly: AssemblyTitle("Novell.CASA.Common.dll")]
 [assembly: AssemblyDescription("")]
 [assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("")]
-[assembly: AssemblyProduct("")]
+[assembly: AssemblyCompany("Novell, Inc")]
+[assembly: AssemblyProduct("CASA")]
 [assembly: AssemblyCopyright("")]
 [assembly: AssemblyTrademark("")]
 [assembly: AssemblyCulture("")]		
@@ -26,7 +26,7 @@ using System.Runtime.CompilerServices;
 // You can specify all the values or you can default the Revision and Build Numbers 
 // by using the '*' as shown below:
 
-[assembly: AssemblyVersion("1.5.146.0")]
+[assembly: AssemblyVersion("1.5.*")]
 
 //
 // In order to sign your assembly you must specify a key to use. Refer to the 

c_micasad/micasad.csproj

@@ -123,6 +123,11 @@
         </Build>
         <Files>
             <Include>
+                <File
+                    RelPath = "AssemblyInfo.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
                 <File
                     RelPath = "cache\IKeychain.cs"
                     SubType = "Code"

c_micasad/objs.lux

@@ -1,4 +1,5 @@
 OBJS=\
+	AssemblyInfo \
 	init/Main \
 	init/AppHandler \
 	common/RequestParser \

c_micasad/src.lux

@@ -1,4 +1,5 @@
 SRC=\
+	AssemblyInfo.cs \
 	init/Main.cs \
 	init/AppHandler.cs \
 	common/RequestParser.cs \

c_policy/AssemblyInfo.cs

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("Novell.CASA.CASAPolicy.dll")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("Novell, Inc")]
+[assembly: AssemblyProduct("CASA")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.5.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("")]
+[assembly: AssemblyKeyName("")]

c_policy/Novell.CASA.CASAPolicy.csproj

@@ -71,7 +71,7 @@
                 />
                 <Reference
                     Name = "System.XML"
-                    AssemblyName = "System.XML"
+                    AssemblyName = "System.Xml"
                     HintPath = "C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\System.XML.dll"
                 />
                 <Reference
@@ -88,6 +88,11 @@
                     SubType = "Code"
                     BuildAction = "Compile"
                 />
+                <File
+                    RelPath = "AssemblyInfo.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
                 <File
                     RelPath = "PersistencePol.cs"
                     SubType = "Code"

c_policy/objs.lux

@@ -1,4 +1,5 @@
 OBJS=\
+	AssemblyInfo\
 	Policy\
 	PolicyImpl\
 	PolicyConstants\

c_policy/objs.w32

@@ -1,4 +1,5 @@
 OBJS=\
+	AssemblyInfo\
 	Policy\
 	PolicyImpl\
 	PolicyConstants\

c_policy/src.lux

@@ -1,4 +1,5 @@
 SRC=\
+	AssemblyInfo.cs\
 	Policy.cs\
 	PolicyImpl.cs\
 	PolicyConstants.cs\

c_policy/src.w32

@@ -1,4 +1,5 @@
 SRC=\
+	AssemblyInfo.cs\
 	Policy.cs\
 	PolicyImpl.cs\
 	PolicyConstants.cs\

c_sharp/NSSCSWrapper/AssemblyInfo.cs

@@ -6,12 +6,12 @@ using System.Runtime.CompilerServices;
 // set of attributes. Change these attribute values to modify the information
 // associated with an assembly.
 //
-[assembly: AssemblyTitle("")]
+[assembly: AssemblyTitle("Novell.CASA.miCASAWrapper.dll")]
 [assembly: AssemblyDescription("")]
 [assembly: AssemblyConfiguration("")]
 [assembly: AssemblyCompany("Novell, Inc")]
-[assembly: AssemblyProduct("miCASA Identity Store Wrapper")]
-[assembly: AssemblyCopyright("All Rights Reserved")]
+[assembly: AssemblyProduct("CASA")]
+[assembly: AssemblyCopyright("")]
 [assembly: AssemblyTrademark("")]
 [assembly: AssemblyCulture("")]		
 
@@ -26,7 +26,7 @@ using System.Runtime.CompilerServices;
 // You can specify all the values or you can default the Revision and Build Numbers 
 // by using the '*' as shown below:
 
-[assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.5.*")]
 
 //
 // In order to sign your assembly you must specify a key to use. Refer to the 

c_sharp/NSSCSWrapper/objs.lux

@@ -1,4 +1,5 @@
 OBJS=\
+	AssemblyInfo\
 	miCasaException\
 	BasicCredential\
 	miCASA\

c_sharp/NSSCSWrapper/src.lux

@@ -1,4 +1,5 @@
 SRC=\
+	AssemblyInfo.cs\
 	miCasaException.cs\
 	BasicCredential.cs\
 	miCASA.cs\