.\" Copyright (c) 1997, 1998, 1999, Thomas Boutell and Boutell.Com, Inc.
.\" This software is released for free use under the terms of
.\" the GNU Public License, version 2 or higher.
.\"
.Dd February 18, 1999
.Dt RINETD 8
.Os LINUX
.Sh NAME
.Nm rinetd
.Nd internet
.Dq redirection server
.Sh SYNOPSIS
.Nm /usr/sbin/rinetd
.Sh VERSION
Version 0.62+syslog+bind, 04/14/2003.
.Sh DESCRIPTION
.Nm rinetd
redirects TCP connections from one IP address and port to another. rinetd
is a single-process server which handles any number of connections to
the address/port pairs specified in the file /etc/rinetd.conf.
Since rinetd runs as a single process using nonblocking I/O, it is
able to redirect a large number of connections without a severe
impact on the machine. This makes it practical to run TCP services
on machines inside an IP masquerading firewall. rinetd does not
redirect FTP, because FTP requires more than one socket.
.Pp
rinetd is typically launched at boot time, using the following syntax:
.Pp
/usr/sbin/rinetd
.Pp
The configuration file is found in the file /etc/rinetd.conf, unless
another file is specified using the -c command line option.
.Sh FORWARDING RULES
Most entries in the configuration file are forwarding rules. The
format of a forwarding rule is as follows:
.Pp
bindaddress bindport connectaddress connectport [sourceaddress]
.Pp
For example:
.Pp
206.125.69.81 80 10.1.1.2 80
.Pp
Would redirect all connections to port 80 of the "real" IP address
206.125.69.81, which could be a virtual interface, through
rinetd to port 80 of the address 10.1.1.2, which would typically
be a machine on the inside of a firewall which has no
direct routing to the outside world.
.Pp
Although responding on individual interfaces rather than on all
interfaces is one of rinetd's primary features, sometimes it is
preferable to respond on all IP addresses that belong to the server.
In this situation, the special IP address 0.0.0.0
can be used. For example:
.Pp
0.0.0.0 23 10.1.1.2 23
.Pp
Would redirect all connections to port 23, for all IP addresses
assigned to the server. This is the default behavior for most
other programs.
.Pp
Service names can be specified instead of port numbers. On most systems,
service names are defined in the file /etc/services.
.Pp
Both IP addresses and hostnames are accepted for
bindaddress and connectaddress.
.Pp
The optional sourceaddress can be used to bind to a specific local
address for the outgoing connection.
.Pp
.Sh ALLOW AND DENY RULES
Configuration files can also contain allow and deny rules.
.Pp
Allow rules which appear before the first forwarding rule are
applied globally: if at least one global allow rule exists,
and the address of a new connection does not
satisfy at least one of the global allow rules, that connection
is immediately rejected, regardless of any other rules.
.Pp
Allow rules which appear after a specific forwarding rule apply
to that forwarding rule only. If at least one allow rule
exists for a particular forwarding rule, and the address of a new
connection does not satisfy at least one of the allow rules
for that forwarding rule, that connection is immediately
rejected, regardless of any other rules.
.Pp
Deny rules which appear before the first forwarding rule are
applied globally: if the address of a new connection satisfies
any of the global deny rules, that connection
is immediately rejected, regardless of any other rules.
.Pp
Deny rules which appear after a specific forwarding rule apply
to that forwarding rule only. If the address of a new
connection satisfies any of the deny rules for that forwarding rule,
that connection is immediately rejected, regardless of any other rules.
.Pp
The format of an allow rule is as follows:
.Pp
allow pattern
.Pp
Patterns can contain the following characters: 0, 1, 2, 3, 4, 5,
6, 7, 8, 9, . (period), ?, and *. The ? wildcard matches any one
character. The * wildcard matches any number of characters, including
zero.
.Pp
For example:
.Pp
allow 206.125.69.*
.Pp
This allow rule matches all IP addresses in the 206.125.69 class C domain.
.Pp
Host names are NOT permitted in allow and deny rules. The performance
cost of looking up IP addresses to find their corresponding names
is prohibitive. Since rinetd is a single process server, all other
connections would be forced to pause during the address lookup.
.Pp
.Sh LOGGING
rinetd is able to produce a log output in three ways:
tab-delimited , web server-style "common log format." both are file-based
or as syslog output. 
.Pp
By default, rinetd does not produce a log file. To activate logging, add
the following line to the configuration file:
.Pp
logfile log-file-location
.Pp
Example: logfile /var/log/rinetd.log
.Pp
By default, rinetd logs in a simple tab-delimited format containing
the following information:
.Pp
Date and time
.Pp
Client address
.Pp
Listening host
.Pp
Listening port
.Pp
Forwarded-to host
.Pp
Forwarded-to port
.Pp
Bytes received from client
.Pp
Bytes sent to client
.Pp
Result message
.Pp
To activate web server-style "common log format" logging,
add the following line to the configuration file:
.Pp
logcommon

to activate syslog output enter the following line to the 
configuration file:

syslog facility priority

Example1:

syslog local0 info

in this case all output is logged to the destination configured
in your syslogd config for facility local0 and priority info

Example2:

syslog

in this case everything goes to daemon info

Example3:

syslog wrongfacility wrongpriority

logging to default: daemon info

.Pp
If configured, the local source address is given in square brackets
after the "listening host" entry.
.Sh COMMAND LINE OPTIONS
The -c command line option is used to specify an alternate
configuration file.
.Pp
The -f command line option is used to run rinetd in the
foreground, without forking to the background.
.Pp
The -h command line option produces a short help message.
.Pp
The -v command line option displays the version number.
.Sh REINITIALIZING RINETD
The kill -1 signal (SIGHUP) can be used to cause rinetd
to reload its configuration file without interrupting existing
connections.
Under Linux\(tm the process id is saved in the file \fI/var/run/rinetd.pid\fR
to facilitate the kill -HUP. An alternate
filename can be provided by using the <code>pidlogfile</code>
configuration file option.

.Sh LIMITATIONS
rinetd redirects TCP connections only. There is
no support for UDP. rinetd only redirects protocols which
use a single TCP socket. This rules out FTP.
.Sh BUGS
The server redirected to is not able to identify the host the
client really came from. This cannot be corrected; however,
the log produced by rinetd provides a way to obtain this
information. Under Unix, Sockets would theoretically lose data when closed
with SO_LINGER turned off, but in Linux this is not the case (kernel
source comments support this belief on my part). On non-Linux Unix platforms,
alternate code which uses a different trick to work around blocking close()
is provided, but this code is untested. The logging is inadequate.
The duration of each connection should be logged.
.Sh LICENSE
Copyright (c) 1997, 1998, 1999, Thomas Boutell and Boutell.Com, Inc.
This software is released for free use under the terms of
the GNU Public License, version 2 or higher. NO WARRANTY
IS EXPRESSED OR IMPLIED. USE THIS SOFTWARE AT YOUR OWN RISK.
.Sh CONTACT INFORMATION
See http://www.boutell.com/rinetd/ for the latest release.
Thomas Boutell can be reached by email: boutell@boutell.com
.Pp
Logging to syslog added by SuSE.
Sourceaddress extension added by Lutz Pressler <lp@SerNet.DE>.
.Sh THANKS
Thanks are due to Bill Davidsen, Libor Pechachek, Sascha Ziemann, the
Apache Group, and many others who have contributed advice
and/or source code to this and other free software projects.