openssl1.0/crypto/bn/bn_lcl.h
2019-08-09 10:00:55 +02:00

539 lines
20 KiB
C

/* crypto/bn/bn_lcl.h */
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
/* ====================================================================
* Copyright (c) 1998-2018 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
#ifndef HEADER_BN_LCL_H
# define HEADER_BN_LCL_H
# include <openssl/bn.h>
# include "bn_int.h"
#ifdef __cplusplus
extern "C" {
#endif
/*-
* BN_window_bits_for_exponent_size -- macro for sliding window mod_exp functions
*
*
* For window size 'w' (w >= 2) and a random 'b' bits exponent,
* the number of multiplications is a constant plus on average
*
* 2^(w-1) + (b-w)/(w+1);
*
* here 2^(w-1) is for precomputing the table (we actually need
* entries only for windows that have the lowest bit set), and
* (b-w)/(w+1) is an approximation for the expected number of
* w-bit windows, not counting the first one.
*
* Thus we should use
*
* w >= 6 if b > 671
* w = 5 if 671 > b > 239
* w = 4 if 239 > b > 79
* w = 3 if 79 > b > 23
* w <= 2 if 23 > b
*
* (with draws in between). Very small exponents are often selected
* with low Hamming weight, so we use w = 1 for b <= 23.
*/
# if 1
# define BN_window_bits_for_exponent_size(b) \
((b) > 671 ? 6 : \
(b) > 239 ? 5 : \
(b) > 79 ? 4 : \
(b) > 23 ? 3 : 1)
# else
/*
* Old SSLeay/OpenSSL table. Maximum window size was 5, so this table differs
* for b==1024; but it coincides for other interesting values (b==160,
* b==512).
*/
# define BN_window_bits_for_exponent_size(b) \
((b) > 255 ? 5 : \
(b) > 127 ? 4 : \
(b) > 17 ? 3 : 1)
# endif
/*
* BN_mod_exp_mont_conttime is based on the assumption that the L1 data cache
* line width of the target processor is at least the following value.
*/
# define MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH ( 64 )
# define MOD_EXP_CTIME_MIN_CACHE_LINE_MASK (MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH - 1)
/*
* Window sizes optimized for fixed window size modular exponentiation
* algorithm (BN_mod_exp_mont_consttime). To achieve the security goals of
* BN_mode_exp_mont_consttime, the maximum size of the window must not exceed
* log_2(MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH). Window size thresholds are
* defined for cache line sizes of 32 and 64, cache line sizes where
* log_2(32)=5 and log_2(64)=6 respectively. A window size of 7 should only be
* used on processors that have a 128 byte or greater cache line size.
*/
# if MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 64
# define BN_window_bits_for_ctime_exponent_size(b) \
((b) > 937 ? 6 : \
(b) > 306 ? 5 : \
(b) > 89 ? 4 : \
(b) > 22 ? 3 : 1)
# define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE (6)
# elif MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 32
# define BN_window_bits_for_ctime_exponent_size(b) \
((b) > 306 ? 5 : \
(b) > 89 ? 4 : \
(b) > 22 ? 3 : 1)
# define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE (5)
# endif
/* Pentium pro 16,16,16,32,64 */
/* Alpha 16,16,16,16.64 */
# define BN_MULL_SIZE_NORMAL (16)/* 32 */
# define BN_MUL_RECURSIVE_SIZE_NORMAL (16)/* 32 less than */
# define BN_SQR_RECURSIVE_SIZE_NORMAL (16)/* 32 */
# define BN_MUL_LOW_RECURSIVE_SIZE_NORMAL (32)/* 32 */
# define BN_MONT_CTX_SET_SIZE_WORD (64)/* 32 */
/*
* 2011-02-22 SMS. In various places, a size_t variable or a type cast to
* size_t was used to perform integer-only operations on pointers. This
* failed on VMS with 64-bit pointers (CC /POINTER_SIZE = 64) because size_t
* is still only 32 bits. What's needed in these cases is an integer type
* with the same size as a pointer, which size_t is not certain to be. The
* only fix here is VMS-specific.
*/
# if defined(OPENSSL_SYS_VMS)
# if __INITIAL_POINTER_SIZE == 64
# define PTR_SIZE_INT long long
# else /* __INITIAL_POINTER_SIZE == 64 */
# define PTR_SIZE_INT int
# endif /* __INITIAL_POINTER_SIZE == 64 [else] */
# elif !defined(PTR_SIZE_INT) /* defined(OPENSSL_SYS_VMS) */
# define PTR_SIZE_INT size_t
# endif /* defined(OPENSSL_SYS_VMS) [else] */
# if !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) && !defined(PEDANTIC)
/*
* BN_UMULT_HIGH section.
*
* No, I'm not trying to overwhelm you when stating that the
* product of N-bit numbers is 2*N bits wide:-) No, I don't expect
* you to be impressed when I say that if the compiler doesn't
* support 2*N integer type, then you have to replace every N*N
* multiplication with 4 (N/2)*(N/2) accompanied by some shifts
* and additions which unavoidably results in severe performance
* penalties. Of course provided that the hardware is capable of
* producing 2*N result... That's when you normally start
* considering assembler implementation. However! It should be
* pointed out that some CPUs (most notably Alpha, PowerPC and
* upcoming IA-64 family:-) provide *separate* instruction
* calculating the upper half of the product placing the result
* into a general purpose register. Now *if* the compiler supports
* inline assembler, then it's not impossible to implement the
* "bignum" routines (and have the compiler optimize 'em)
* exhibiting "native" performance in C. That's what BN_UMULT_HIGH
* macro is about:-)
*
* <appro@fy.chalmers.se>
*/
# if defined(__alpha) && (defined(SIXTY_FOUR_BIT_LONG) || defined(SIXTY_FOUR_BIT))
# if defined(__DECC)
# include <c_asm.h>
# define BN_UMULT_HIGH(a,b) (BN_ULONG)asm("umulh %a0,%a1,%v0",(a),(b))
# elif defined(__GNUC__) && __GNUC__>=2
# define BN_UMULT_HIGH(a,b) ({ \
register BN_ULONG ret; \
asm ("umulh %1,%2,%0" \
: "=r"(ret) \
: "r"(a), "r"(b)); \
ret; })
# endif /* compiler */
# elif defined(_ARCH_PPC) && defined(__64BIT__) && defined(SIXTY_FOUR_BIT_LONG)
# if defined(__GNUC__) && __GNUC__>=2
# define BN_UMULT_HIGH(a,b) ({ \
register BN_ULONG ret; \
asm ("mulhdu %0,%1,%2" \
: "=r"(ret) \
: "r"(a), "r"(b)); \
ret; })
# endif /* compiler */
# elif (defined(__x86_64) || defined(__x86_64__)) && \
(defined(SIXTY_FOUR_BIT_LONG) || defined(SIXTY_FOUR_BIT))
# if defined(__GNUC__) && __GNUC__>=2
# define BN_UMULT_HIGH(a,b) ({ \
register BN_ULONG ret,discard; \
asm ("mulq %3" \
: "=a"(discard),"=d"(ret) \
: "a"(a), "g"(b) \
: "cc"); \
ret; })
# define BN_UMULT_LOHI(low,high,a,b) \
asm ("mulq %3" \
: "=a"(low),"=d"(high) \
: "a"(a),"g"(b) \
: "cc");
# endif
# elif (defined(_M_AMD64) || defined(_M_X64)) && defined(SIXTY_FOUR_BIT)
# if defined(_MSC_VER) && _MSC_VER>=1400
unsigned __int64 __umulh(unsigned __int64 a, unsigned __int64 b);
unsigned __int64 _umul128(unsigned __int64 a, unsigned __int64 b,
unsigned __int64 *h);
# pragma intrinsic(__umulh,_umul128)
# define BN_UMULT_HIGH(a,b) __umulh((a),(b))
# define BN_UMULT_LOHI(low,high,a,b) ((low)=_umul128((a),(b),&(high)))
# endif
# elif defined(__mips) && (defined(SIXTY_FOUR_BIT) || defined(SIXTY_FOUR_BIT_LONG))
# if defined(__GNUC__) && __GNUC__>=2
# if __GNUC__>4 || (__GNUC__>=4 && __GNUC_MINOR__>=4)
/* "h" constraint is no more since 4.4 */
# define BN_UMULT_HIGH(a,b) (((__uint128_t)(a)*(b))>>64)
# define BN_UMULT_LOHI(low,high,a,b) ({ \
__uint128_t ret=(__uint128_t)(a)*(b); \
(high)=ret>>64; (low)=ret; })
# else
# define BN_UMULT_HIGH(a,b) ({ \
register BN_ULONG ret; \
asm ("dmultu %1,%2" \
: "=h"(ret) \
: "r"(a), "r"(b) : "l"); \
ret; })
# define BN_UMULT_LOHI(low,high,a,b)\
asm ("dmultu %2,%3" \
: "=l"(low),"=h"(high) \
: "r"(a), "r"(b));
# endif
# endif
# elif defined(__aarch64__) && defined(SIXTY_FOUR_BIT_LONG)
# if defined(__GNUC__) && __GNUC__>=2
# define BN_UMULT_HIGH(a,b) ({ \
register BN_ULONG ret; \
asm ("umulh %0,%1,%2" \
: "=r"(ret) \
: "r"(a), "r"(b)); \
ret; })
# endif
# endif /* cpu */
# endif /* OPENSSL_NO_ASM */
/*************************************************************
* Using the long long type
*/
# define Lw(t) (((BN_ULONG)(t))&BN_MASK2)
# define Hw(t) (((BN_ULONG)((t)>>BN_BITS2))&BN_MASK2)
# ifdef BN_DEBUG_RAND
# define bn_clear_top2max(a) \
{ \
int ind = (a)->dmax - (a)->top; \
BN_ULONG *ftl = &(a)->d[(a)->top-1]; \
for (; ind != 0; ind--) \
*(++ftl) = 0x0; \
}
# else
# define bn_clear_top2max(a)
# endif
# ifdef BN_LLONG
# define mul_add(r,a,w,c) { \
BN_ULLONG t; \
t=(BN_ULLONG)w * (a) + (r) + (c); \
(r)= Lw(t); \
(c)= Hw(t); \
}
# define mul(r,a,w,c) { \
BN_ULLONG t; \
t=(BN_ULLONG)w * (a) + (c); \
(r)= Lw(t); \
(c)= Hw(t); \
}
# define sqr(r0,r1,a) { \
BN_ULLONG t; \
t=(BN_ULLONG)(a)*(a); \
(r0)=Lw(t); \
(r1)=Hw(t); \
}
# elif defined(BN_UMULT_LOHI)
# define mul_add(r,a,w,c) { \
BN_ULONG high,low,ret,tmp=(a); \
ret = (r); \
BN_UMULT_LOHI(low,high,w,tmp); \
ret += (c); \
(c) = (ret<(c))?1:0; \
(c) += high; \
ret += low; \
(c) += (ret<low)?1:0; \
(r) = ret; \
}
# define mul(r,a,w,c) { \
BN_ULONG high,low,ret,ta=(a); \
BN_UMULT_LOHI(low,high,w,ta); \
ret = low + (c); \
(c) = high; \
(c) += (ret<low)?1:0; \
(r) = ret; \
}
# define sqr(r0,r1,a) { \
BN_ULONG tmp=(a); \
BN_UMULT_LOHI(r0,r1,tmp,tmp); \
}
# elif defined(BN_UMULT_HIGH)
# define mul_add(r,a,w,c) { \
BN_ULONG high,low,ret,tmp=(a); \
ret = (r); \
high= BN_UMULT_HIGH(w,tmp); \
ret += (c); \
low = (w) * tmp; \
(c) = (ret<(c))?1:0; \
(c) += high; \
ret += low; \
(c) += (ret<low)?1:0; \
(r) = ret; \
}
# define mul(r,a,w,c) { \
BN_ULONG high,low,ret,ta=(a); \
low = (w) * ta; \
high= BN_UMULT_HIGH(w,ta); \
ret = low + (c); \
(c) = high; \
(c) += (ret<low)?1:0; \
(r) = ret; \
}
# define sqr(r0,r1,a) { \
BN_ULONG tmp=(a); \
(r0) = tmp * tmp; \
(r1) = BN_UMULT_HIGH(tmp,tmp); \
}
# else
/*************************************************************
* No long long type
*/
# define LBITS(a) ((a)&BN_MASK2l)
# define HBITS(a) (((a)>>BN_BITS4)&BN_MASK2l)
# define L2HBITS(a) (((a)<<BN_BITS4)&BN_MASK2)
# define LLBITS(a) ((a)&BN_MASKl)
# define LHBITS(a) (((a)>>BN_BITS2)&BN_MASKl)
# define LL2HBITS(a) ((BN_ULLONG)((a)&BN_MASKl)<<BN_BITS2)
# define mul64(l,h,bl,bh) \
{ \
BN_ULONG m,m1,lt,ht; \
\
lt=l; \
ht=h; \
m =(bh)*(lt); \
lt=(bl)*(lt); \
m1=(bl)*(ht); \
ht =(bh)*(ht); \
m=(m+m1)&BN_MASK2; if (m < m1) ht+=L2HBITS((BN_ULONG)1); \
ht+=HBITS(m); \
m1=L2HBITS(m); \
lt=(lt+m1)&BN_MASK2; if (lt < m1) ht++; \
(l)=lt; \
(h)=ht; \
}
# define sqr64(lo,ho,in) \
{ \
BN_ULONG l,h,m; \
\
h=(in); \
l=LBITS(h); \
h=HBITS(h); \
m =(l)*(h); \
l*=l; \
h*=h; \
h+=(m&BN_MASK2h1)>>(BN_BITS4-1); \
m =(m&BN_MASK2l)<<(BN_BITS4+1); \
l=(l+m)&BN_MASK2; if (l < m) h++; \
(lo)=l; \
(ho)=h; \
}
# define mul_add(r,a,bl,bh,c) { \
BN_ULONG l,h; \
\
h= (a); \
l=LBITS(h); \
h=HBITS(h); \
mul64(l,h,(bl),(bh)); \
\
/* non-multiply part */ \
l=(l+(c))&BN_MASK2; if (l < (c)) h++; \
(c)=(r); \
l=(l+(c))&BN_MASK2; if (l < (c)) h++; \
(c)=h&BN_MASK2; \
(r)=l; \
}
# define mul(r,a,bl,bh,c) { \
BN_ULONG l,h; \
\
h= (a); \
l=LBITS(h); \
h=HBITS(h); \
mul64(l,h,(bl),(bh)); \
\
/* non-multiply part */ \
l+=(c); if ((l&BN_MASK2) < (c)) h++; \
(c)=h&BN_MASK2; \
(r)=l&BN_MASK2; \
}
# endif /* !BN_LLONG */
# if defined(OPENSSL_DOING_MAKEDEPEND) && defined(OPENSSL_FIPS)
# undef bn_div_words
# endif
void bn_mul_normal(BN_ULONG *r, BN_ULONG *a, int na, BN_ULONG *b, int nb);
void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b);
void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b);
void bn_sqr_normal(BN_ULONG *r, const BN_ULONG *a, int n, BN_ULONG *tmp);
void bn_sqr_comba8(BN_ULONG *r, const BN_ULONG *a);
void bn_sqr_comba4(BN_ULONG *r, const BN_ULONG *a);
int bn_cmp_words(const BN_ULONG *a, const BN_ULONG *b, int n);
int bn_cmp_part_words(const BN_ULONG *a, const BN_ULONG *b, int cl, int dl);
void bn_mul_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2,
int dna, int dnb, BN_ULONG *t);
void bn_mul_part_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b,
int n, int tna, int tnb, BN_ULONG *t);
void bn_sqr_recursive(BN_ULONG *r, const BN_ULONG *a, int n2, BN_ULONG *t);
void bn_mul_low_normal(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n);
void bn_mul_low_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2,
BN_ULONG *t);
void bn_mul_high(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, BN_ULONG *l, int n2,
BN_ULONG *t);
BN_ULONG bn_add_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
int cl, int dl);
BN_ULONG bn_sub_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
int cl, int dl);
int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,
const BN_ULONG *np, const BN_ULONG *n0, int num);
#ifdef __cplusplus
}
#endif
#endif