openssl1.0/doc/apps/genpkey.pod

301 lines
8.8 KiB
Plaintext
Raw Permalink Normal View History

2019-08-09 10:00:55 +02:00
=pod
=head1 NAME
openssl-genpkey,
genpkey - generate a private key
=head1 SYNOPSIS
B<openssl> B<genpkey>
[B<-out filename>]
[B<-outform PEM|DER>]
[B<-pass arg>]
[B<-I<cipher>>]
[B<-engine id>]
[B<-paramfile file>]
[B<-algorithm alg>]
[B<-pkeyopt opt:value>]
[B<-genparam>]
[B<-text>]
=head1 DESCRIPTION
The B<genpkey> command generates a private key.
=head1 OPTIONS
=over 4
=item B<-out filename>
the output filename. If this argument is not specified then standard output is
used.
=item B<-outform DER|PEM>
This specifies the output format DER or PEM. The default format is PEM.
=item B<-pass arg>
The output file password source. For more information about the format of B<arg>
see the B<PASS PHRASE ARGUMENTS> section in L<openssl(1)>.
=item B<-I<cipher>>
This option encrypts the private key with the supplied cipher. Any algorithm
name accepted by EVP_get_cipherbyname() is acceptable such as B<des3>.
=item B<-engine id>
Specifying an engine (by its unique B<id> string) will cause B<genpkey>
to attempt to obtain a functional reference to the specified engine,
thus initialising it if needed. The engine will then be set as the default
for all available algorithms. If used this option should precede all other
options.
=item B<-algorithm alg>
Public key algorithm to use such as RSA, DSA or DH. If used this option must
precede any B<-pkeyopt> options. The options B<-paramfile> and B<-algorithm>
are mutually exclusive. Engines may add algorithms in addition to the standard
built-in ones.
Valid built-in algorithm names for private key generation are RSA and EC.
Valid built-in algorithm names for parameter generation (see the B<-genparam>
option) are DH, DSA and EC.
Note that the algorithm name X9.42 DH may be used as a synonym for the DH
algorithm. These are identical and do not indicate the type of parameters that
will be generated. Use the B<dh_paramgen_type> option to indicate whether PKCS#3
or X9.42 DH parameters are required. See L<DH Parameter Generation Options>
below for more details.
=item B<-pkeyopt opt:value>
Set the public key algorithm option B<opt> to B<value>. The precise set of
options supported depends on the public key algorithm used and its
implementation. See L<KEY GENERATION OPTIONS> and
L<PARAMETER GENERATION OPTIONS> below for more details.
=item B<-genparam>
Generate a set of parameters instead of a private key. If used this option must
precede any B<-algorithm>, B<-paramfile> or B<-pkeyopt> options.
=item B<-paramfile filename>
Some public key algorithms generate a private key based on a set of parameters.
They can be supplied using this option. If this option is used the public key
algorithm used is determined by the parameters. If used this option must
precede and B<-pkeyopt> options. The options B<-paramfile> and B<-algorithm>
are mutually exclusive.
=item B<-text>
Print an (unencrypted) text representation of private and public keys and
parameters along with the PEM or DER structure.
=back
=head1 KEY GENERATION OPTIONS
The options supported by each algorith and indeed each implementation of an
algorithm can vary. The options for the OpenSSL implementations are detailed
below.
=head2 RSA Key Generation Options
=over 4
=item B<rsa_keygen_bits:numbits>
The number of bits in the generated key. If not specified 2048 is used.
=item B<rsa_keygen_pubexp:value>
The RSA public exponent value. This can be a large decimal or
hexadecimal value if preceded by B<0x>. Default value is 65537.
=back
=head2 EC Key Generation Options
The EC key generation options can also be used for parameter generation.
=over 4
=item B<ec_paramgen_curve:curve>
The EC curve to use. OpenSSL supports NIST curve names such as "P-256".
=item B<ec_param_enc:encoding>
The encoding to use for parameters. The "encoding" parameter must be either
"named_curve" or "explicit". The default value is "named_curve".
=back
=head1 PARAMETER GENERATION OPTIONS
The options supported by each algorithm and indeed each implementation of an
algorithm can vary. The options for the OpenSSL implementations are detailed
below.
=head2 DSA Parameter Generation Options
=over 4
=item B<dsa_paramgen_bits:numbits>
The number of bits in the generated prime. If not specified 2048 is used.
=item B<dsa_paramgen_q_bits:numbits>
The number of bits in the q parameter. Must be one of 160, 224 or 256. If not
specified 224 is used.
=item B<dsa_paramgen_md:digest>
The digest to use during parameter generation. Must be one of B<sha1>, B<sha224>
or B<sha256>. If set, then the number of bits in B<q> will match the output size
of the specified digest and the B<dsa_paramgen_q_bits> parameter will be
ignored. If not set, then a digest will be used that gives an output matching
the number of bits in B<q>, i.e. B<sha1> if q length is 160, B<sha224> if it 224
or B<sha256> if it is 256.
=back
=head2 DH Parameter Generation Options
=over 4
=item B<dh_paramgen_prime_len:numbits>
The number of bits in the prime parameter B<p>. The default is 2048.
=item B<dh_paramgen_subprime_len:numbits>
The number of bits in the sub prime parameter B<q>. The default is 256 if the
prime is at least 2048 bits long or 160 otherwise. Only relevant if used in
conjunction with the B<dh_paramgen_type> option to generate X9.42 DH parameters.
=item B<dh_paramgen_generator:value>
The value to use for the generator B<g>. The default is 2.
=item B<dh_paramgen_type:value>
The type of DH parameters to generate. Use 0 for PKCS#3 DH and 1 for X9.42 DH.
The default is 0.
=item B<dh_rfc5114:num>
If this option is set, then the appropriate RFC5114 parameters are used
instead of generating new parameters. The value B<num> can take the
values 1, 2 or 3 corresponding to RFC5114 DH parameters consisting of
1024 bit group with 160 bit subgroup, 2048 bit group with 224 bit subgroup
and 2048 bit group with 256 bit subgroup as mentioned in RFC5114 sections
2.1, 2.2 and 2.3 respectively. If present this overrides all other DH parameter
options.
=back
=head2 EC Parameter Generation Options
The EC parameter generation options are the same as for key generation. See
L<EC Key Generation Options> above.
=head1 GOST2001 KEY GENERATION AND PARAMETER OPTIONS
Gost 2001 support is not enabled by default. To enable this algorithm,
one should load the ccgost engine in the OpenSSL configuration file.
See README.gost file in the engines/ccgost directiry of the source
distribution for more details.
Use of a parameter file for the GOST R 34.10 algorithm is optional.
Parameters can be specified during key generation directly as well as
during generation of parameter file.
=over 4
=item B<paramset:name>
Specifies GOST R 34.10-2001 parameter set according to RFC 4357.
Parameter set can be specified using abbreviated name, object short name or
numeric OID. Following parameter sets are supported:
paramset OID Usage
A 1.2.643.2.2.35.1 Signature
B 1.2.643.2.2.35.2 Signature
C 1.2.643.2.2.35.3 Signature
XA 1.2.643.2.2.36.0 Key exchange
XB 1.2.643.2.2.36.1 Key exchange
test 1.2.643.2.2.35.0 Test purposes
=back
=head1 NOTES
The use of the genpkey program is encouraged over the algorithm specific
utilities because additional algorithm options and ENGINE provided algorithms
can be used.
=head1 EXAMPLES
Generate an RSA private key using default parameters:
openssl genpkey -algorithm RSA -out key.pem
Encrypt output private key using 128 bit AES and the passphrase "hello":
openssl genpkey -algorithm RSA -out key.pem -aes-128-cbc -pass pass:hello
Generate a 2048 bit RSA key using 3 as the public exponent:
openssl genpkey -algorithm RSA -out key.pem -pkeyopt rsa_keygen_bits:2048 \
-pkeyopt rsa_keygen_pubexp:3
Generate 2048 bit DSA parameters:
openssl genpkey -genparam -algorithm DSA -out dsap.pem \
-pkeyopt dsa_paramgen_bits:2048
Generate DSA key from parameters:
openssl genpkey -paramfile dsap.pem -out dsakey.pem
Generate 2048 bit DH parameters:
openssl genpkey -genparam -algorithm DH -out dhp.pem \
-pkeyopt dh_paramgen_prime_len:2048
Generate 2048 bit X9.42 DH parameters:
openssl genpkey -genparam -algorithm DH -out dhpx.pem \
-pkeyopt dh_paramgen_prime_len:2048 \
-pkeyopt dh_paramgen_type:1
Output RFC5114 2048 bit DH parameters with 224 bit subgroup:
openssl genpkey -genparam -algorithm DH -out dhp.pem -pkeyopt dh_rfc5114:2
Generate DH key from parameters:
openssl genpkey -paramfile dhp.pem -out dhkey.pem
Generate EC key directly:
openssl genpkey -algorithm EC -out eckey.pem \
-pkeyopt ec_paramgen_curve:P-384 \
-pkeyopt ec_param_enc:named_curve
=head1 HISTORY
The ability to use NIST curve names, and to generate an EC key directly,
were added in OpenSSL 1.0.2.
=cut