Bump

Upstream version 3.2.1

debian/NEWS

@@ -0,0 +1,92 @@
+nagios-nrpe (3.2.0-2) unstable; urgency=medium
+
+  The bug that caused the SSL support between NRPE 2.x and 3.x not
+  to work has been fixed.
+
+  Because the default SSL support without certificates configured
+  in nrpe.cfg uses pre-generated key data, configuring SSL
+  certificates is strongly advised when STunnel is not used.
+
+  The ssl-cert package can be used to generate a self-signed
+  certificate, but CA certificates like those from Let's Encrypt
+  are a better choice.
+
+  SSL support has been re-enabled by default, to be better compatible
+  with previous NRPE versions where SSL support was enabled by default
+  too.
+
+  The check_nrpe command definition has been updated to enable SSL
+  support (by removing the -n option) and the check_nrpe_ssl command
+  definition has been removed. The previous check_nrpe command
+  definition which disables SSL support is available with the new
+  check_nrpe_nossl command definition.
+
+ -- Bas Couwenberg <sebastic@debian.org>  Fri, 07 Jul 2017 13:48:38 +0200
+
+nagios-nrpe (3.0.1-1) unstable; urgency=medium
+
+  The check_nrpe command definition has been updated to remove the
+  arguments option, because nagios-nrpe-server does not support
+  command arguments since 2.15-1. And the check_nrpe_1arg command
+  definition has been removed.
+
+  If you're using the check_nrpe_1arg command in your Nagios/Icinga
+  configuration, you need to replace it with check_nrpe.
+
+  SSL support is disabled by default, the reworked SSL/TLS support in
+  NRPE requires configuration before it can be used. Read the
+  instructions in /usr/share/doc/nagios-nrpe-server/README.SSL.md.gz
+  before enabling SSL support in /etc/default/nagios-nrpe-server.
+
+  The default check_nrpe command in check_nrpe.cfg has been updated
+  to disable SSL by default too. The check_nrpe_ssl command has been
+  added to connect to the NRPE daemon over SSL.
+
+  Beware that the new NRPE daemon only works with old check_nrpe
+  plugins when SSL support is disabled on both sides, likewise the
+  new check_nrpe plugin only works with the old NRPE daemon when SSL
+  support is disabled.
+
+  To use SSL between the NRPE client and server, configuring Stunnel
+  is recommended.
+
+ -- Bas Couwenberg <sebastic@debian.org>  Mon, 05 Dec 2016 01:16:46 +0100
+
+nagios-nrpe (2.15-1) unstable; urgency=high
+
+  This update disables the command-args support in nrpe. The feature
+  has several security problems and is often used wrong. If you have to
+  use this feature recompile the package with --enable-command-args
+  in debian/rules.
+
+ -- Alexander Wirt <formorer@debian.org>  Tue, 15 Jul 2014 09:52:48 +0200
+
+nagios-nrpe (2.12-4) unstable; urgency=low
+
+  The pidfile creation mechanism changed with this update. If you do not 
+  add "pid_file=/var/run/nagios/nrpe.pid" to you nrpe config take care that
+  the user "nagios" is able to write to your pidfile location. You can also 
+  change the initscript to create the pid directory on your own. 
+
+ -- Alexander Wirt <formorer@debian.org>  Tue, 07 Jul 2009 07:42:13 +0200
+
+nagios-nrpe (2.12-3) unstable; urgency=low
+
+  The homedirectory of the nagios user moved to /var/lib/nagios
+  which is now common on all nagios related packages. Its recommended
+  that you migrate an already existing nagios user to use /var/lib/nagios 
+  as homedirectory. 
+
+ -- Alexander Wirt <formorer@debian.org>  Sat, 21 Mar 2009 09:08:58 +0100
+
+nagios-nrpe (2.4-1) unstable; urgency=low
+
+  the nagios-nrpe-doc package is no longer provided.  the documentation
+  can now be found in /usr/share/doc/nagios-nrpe-{server|plugins}.  new
+  versions of the plugin and server packages conflict with the doc
+  package to prevent the old (and possibly incorrect in the future)
+  documentation from remaining.  to fully purge all information about
+  the package you should run:
+  	dpkg -P nagios-nrpe-doc
+
+ -- sean finney <seanius@debian.org>  Mon, 13 Mar 2006 15:47:47 +0100

debian/README.Debian

@@ -0,0 +1,23 @@
+NRPE
+----
+
+Put any local check command you need into /etc/nagios/nrpe_local.cfg or
+as a *.cfg file in /etc/nagios/nrpe.d/
+These files are included from the /etc/nagios/nrpe.cfg
+
+This package is built without support for command argument processing. If you
+want to enable it, you will have to rebuild this package with
+--enable-command-args in debian/rules.
+The feature has several security problems and should not be used. If you
+really need some dynamic argument processing try check_by_ssh or something
+similar.
+
+Do not rely on SSL mode for security
+------------------------------------
+
+NRPE contains an SSL mode which encrypts the data over the NRPE channel.
+The current implementation does not verify client or server and uses
+pregenerated key data by default. It cannot be fixed right away because
+it would break the existing NRPE protocol.
+
+Please refer to the file SECURITY.md in this directory for more information.

debian/TODO

@@ -0,0 +1,5 @@
+TODO
+====
+
+
+Add a nagios-common package which ships a user and homedir

debian/changelog

@@ -0,0 +1,470 @@
+nagios-nrpe (3.2.1-1) unstable; urgency=medium
+
+  * New upstream release.
+  * Drop patches included upstream, refresh remaining patches.
+
+ -- Bas Couwenberg <sebastic@debian.org>  Sun, 03 Sep 2017 10:52:40 +0200
+
+nagios-nrpe (3.2.0-4) unstable; urgency=medium
+
+  * Add upstream patch to turn seteuid errors into warnings.
+    (closes: #868326)
+
+ -- Bas Couwenberg <sebastic@debian.org>  Fri, 14 Jul 2017 16:51:12 +0200
+
+nagios-nrpe (3.2.0-3) unstable; urgency=medium
+
+  * Re-enable SSL support by default.
+    Compatibility with older versions has been fixed.
+
+ -- Bas Couwenberg <sebastic@debian.org>  Fri, 07 Jul 2017 14:08:13 +0200
+
+nagios-nrpe (3.2.0-2) unstable; urgency=medium
+
+  * Fix 11_reproducible_dh.h.patch to not leave USE_SSL_DH undefined.
+    Thanks to Johan Carlquist for pointing out this issue.
+  * Drop --with-need-dh=no configure option, dh is needed.
+  * Remove deterministic "openssl dhparam" output handling,
+    dh.h not included in upstream source.
+
+ -- Bas Couwenberg <sebastic@debian.org>  Thu, 06 Jul 2017 14:33:39 +0200
+
+nagios-nrpe (3.2.0-1) unstable; urgency=medium
+
+  * New upstream release.
+    (closes: #565643)
+  * Bump Standards-Version to 4.0.0, no changes.
+  * Add autopkgtest to test installability.
+  * Set --with-logdir configure option to /var/log.
+  * Update watch file for GitHub releases.
+  * Update copyright file.
+  * Refresh patches.
+  * Reinstate 11_reproducible_dh.h.patch for reproducible dh.h.
+  * Regenerate dh.h with OpenSSL 1.1.0.
+
+ -- Bas Couwenberg <sebastic@debian.org>  Wed, 05 Jul 2017 09:53:06 +0200
+
+nagios-nrpe (3.1.1-1) unstable; urgency=medium
+
+  * Move from experimental to unstable.
+
+ -- Bas Couwenberg <sebastic@debian.org>  Sun, 18 Jun 2017 13:39:05 +0200
+
+nagios-nrpe (3.1.1-1~exp1) experimental; urgency=medium
+
+  * New upstream release.
+  * Drop format-security.patch, applied upstream.
+  * Use --with-need-dh=no configure option instead of patch.
+
+ -- Bas Couwenberg <sebastic@debian.org>  Sat, 27 May 2017 10:57:03 +0200
+
+nagios-nrpe (3.1.0-1~exp1) experimental; urgency=medium
+
+  * New upstream release.
+    (closes: #849417, #445976, #691328)
+  * Fix typo in manpage.
+    (closes: #856658)
+  * Drop 10_reproducible_build.patch, applied upstream.
+    Refresh remaining patches.
+  * Update build dependency for OpenSSL 1.1.0.
+    (closes: #859223)
+  * Add patch to fix FTBFS with -Werror=format-security.
+
+ -- Bas Couwenberg <sebastic@debian.org>  Wed, 19 Apr 2017 19:28:05 +0200
+
+nagios-nrpe (3.0.1-3) unstable; urgency=medium
+
+  * Add reload command to systemd service file.
+  * Make missing EnvironmentFile non-fatal in systemd service.
+
+ -- Bas Couwenberg <sebastic@debian.org>  Sat, 24 Dec 2016 10:24:09 +0100
+
+nagios-nrpe (3.0.1-2) unstable; urgency=medium
+
+  * Add systemd service file and tmpfiles.d configuration.
+    (closes: #665422)
+  * Update nrpe manpage to include new options.
+
+ -- Bas Couwenberg <sebastic@debian.org>  Fri, 23 Dec 2016 23:15:19 +0100
+
+nagios-nrpe (3.0.1-1) unstable; urgency=medium
+
+  * Update check_nrpe.cfg to remove command with arguments.
+    (LP: #975918)
+  * Disable SSL support by default, requires configuration.
+    It also doesn't work well with old check_nrpe versions.
+  * Move from experimental to unstable.
+
+ -- Bas Couwenberg <sebastic@debian.org>  Fri, 09 Dec 2016 00:15:29 +0100
+
+nagios-nrpe (3.0.1-1~exp1) experimental; urgency=medium
+
+  [ Alexander Wirt ]
+  * Sync uploaders with reality.
+    (closes: #773441)
+
+  [ Bas Couwenberg ]
+  * New upstream release.
+    - Reworked SSL/TLS. See the README.SSL.md file for full info.
+    (closes: #547092)
+  * Add myself to Uploaders.
+  * Add Vcs-* fields to control file.
+    (closes: #755507)
+  * Change nagios-plugins dependencies to monitoring-plugins.
+  * Switch from dpatch to source format 3.0 (quilt).
+    (closes: #756410)
+  * Drop obsolete patch: 04_weird_output.dpatch.
+  * Restructure control file with cme.
+  * Reorder (build) dependencies.
+  * Add Homepage field to control file.
+  * Update copyright file using copyright-format 1.0.
+  * Add gbp.conf to use pristine-tar by default.
+  * Update build dependency to use openssl 1.0.
+  * Enable all hardening buildflags.
+    (closes: #728218)
+  * Enable parallel builds.
+  * Suggest xinetd | inetd.
+    (closes: #662247)
+  * Include PDF & ODT documentation in docs.
+    (closes: #662249)
+  * Update watch file to handle common issues.
+  * Add upstream metadata.
+  * Merge nrpe.cfg patches into single patch.
+    (closes: #660583)
+  * Use configure option to set custom PID directory instead of patch.
+  * Drop 09_noremove_pid.patch, fixed upstream. Refresh remaining patches.
+  * Add patch to use pre-generated dh.h for reproducible builds.
+  * Override dh_auto_build to build all targets.
+  * Use dh-autoreconf instead of autotools-dev.
+  * Use exit status 0 in init script when inetd is configured.
+    (closes: #775924)
+  * Include README.SSL.md in docs.
+  * Bump Standards-Version to 3.9.8, changes:
+    Vcs-* fields, copyright-format 1.0.
+
+  [ Benjamin Drung ]
+  * Use dh_auto_configure to enable default hardening flags.
+    (closes: #843805)
+  * Fix copyright-refers-to-symlink-license.
+    (closes: #756414)
+
+  [ Chris Lamb ]
+  * Make the build reproducible.
+    (closes: #834857)
+
+ -- Bas Couwenberg <sebastic@debian.org>  Sun, 04 Dec 2016 18:36:54 +0100
+
+nagios-nrpe (2.15-1) unstable; urgency=high
+
+  * [f2cea9f] Imported Upstream version 2.15
+  * [023e909] Disable command-args in nrpe. (Closes: #745272)
+  * [6369220] Use restorecon to set SE Linux context on $PIDDIR
+    (Closes: #679241)
+  * [a484e7d] Switch order of nagios-plugins recommends to prefer -basic.
+    (Closes: #752243)
+  * [b1ef043] Don't recommend a core implementation for the plugin
+  * [16dbf01] Remove obsolete patch
+  * [694b804] Remove luk from uploaders. (Closes: #719636)
+  * [28d9004] Remove obsolete patch
+  * [86ea67e] 08_CVE-2013-1362.dpatch is now obsolete
+  * [74e3b07] Refresh patches
+  * [1258ab2] Reword NEWS entry
+  * [744eec6] configure is buggy: --disable- in fact enables a feautre.
+  * [eec54b6] Adjust README.Debian for the removal or argument processing
+
+ -- Alexander Wirt <formorer@debian.org>  Tue, 15 Jul 2014 18:30:36 +0200
+
+nagios-nrpe (2.13-4) unstable; urgency=low
+
+  * [dcffec6] Do not remove the PID file after a connection error.
+    Original patch from Hiren Patel. (Closes: #716949)
+
+ -- Bernd Zeimetz <bzed@debian.org>  Mon, 15 Jul 2013 16:07:54 +0200
+
+nagios-nrpe (2.13-3) unstable; urgency=high
+
+  * [e55afd1] Add 08_CVE-2013-1362.dpatch patch.
+    If command arguments are enabled in the NRPE configuration, it was
+    possible to pass $() as arguments as the checking for nasty caracters
+    was not strict enough to catch $(). This allowed executing shell
+    commands under a subprocess and pass the output as a parameter to the
+    called script (if run under bash). CVE-2013-1362 (Closes: #701227)
+
+ -- Alexander Wirt <formorer@debian.org>  Sat, 09 Mar 2013 08:42:05 +0100
+
+nagios-nrpe (2.13-2) unstable; urgency=high
+
+  [ Thijs Kinkhorst ]
+  * Add warning about the inadequateness of the 'ssl' option.
+
+ -- Alexander Wirt <formorer@debian.org>  Mon, 11 Feb 2013 17:45:20 +0100
+
+nagios-nrpe (2.13-1) unstable; urgency=low
+
+  * [3e113b5] Imported Upstream version 2.13
+  * [acc152b] Bump standards version
+  * [c707bce] Use dh9 for hardening
+  * Updated patches
+
+ -- Alexander Wirt <formorer@debian.org>  Sat, 30 Jun 2012 11:08:22 +0200
+
+nagios-nrpe (2.12-6) unstable; urgency=low
+
+  * [36b1062] Add add icinga to the list of recommends
+  * [a698acb] Don't remove homedirectory of the nagios user (Closes: #665845)
+  * [4dc53fb] Use retry argument for start-stop-daemon when stopping nrpe
+    (Closes: #650464)
+
+ -- Alexander Wirt <formorer@debian.org>  Mon, 30 Apr 2012 09:25:45 +0200
+
+nagios-nrpe (2.12-5) unstable; urgency=low
+
+  [ Alexander Wirt ]
+  * [e3af3bd] Bump compat to 8
+  * [4f9e892] Add versioned depends to dpatch for sequence support
+  * [5ec5a3b] Install example nrpe_local.cfg
+  * [69ea7b9] Move rules file to dh
+  * [298f725] Use autotools_dev dh sequence helper
+  * [10da37d] Bump debhelper dependency to 8
+  * [2b009ae] Bump standards version
+  * [4d093e3] Ignore usermod failure (Closes: #538894)
+  * [e776f7b] Use pidfile for start-stop-daemon and fix pidfile deletion
+    (Closes: #548157, #639523)
+  * [8050c97] Support multiarch in rulesfile (Closes: #642790)
+  * [027274f] Use pidfile for start-stop-daemon in start()
+  * [1f69c63] Support status in nrpe initscript
+  * [42ccdcc] Add a comment to nrpe.cfg that snipplets have to end .cfg
+    (Closes: #641933)
+
+  [ Jan Wagner ]
+  * [0a80fdb] Update debian/README.Debian about conf.d/
+
+ -- Alexander Wirt <formorer@debian.org>  Sun, 25 Sep 2011 08:35:48 +0200
+
+nagios-nrpe (2.12-4) unstable; urgency=low
+
+  * Build against libwrap0-dev (Closes: #412705)
+  * Remove 'last modified header' from nrpe config (Closes: #499280)
+  * Create /etc/nagios/nrpe.d (Closes: #505700, #474333)
+  * Fix pidfile handling (Closes: #411046)
+  * Add newer config.{guess,sub} (Closes: #535737)
+    - Build-depend on autotools-dev
+  * Delete /var/lib/nagios if empty after purge (Closes: #527069)
+  * Bump standards version (add README.source)
+  * Bump dh_compat version (remove -k from dh_clean)
+
+ -- Alexander Wirt <formorer@debian.org>  Mon, 06 Jul 2009 07:08:26 +0200
+
+nagios-nrpe (2.12-3.1) unstable; urgency=low
+
+  * Non-maintainer upload.
+  * Fix bashism (Closes: #530149).
+
+ -- Raphael Geissert <geissert@debian.org>  Sat, 04 Jul 2009 20:23:23 -0500
+
+nagios-nrpe (2.12-3) unstable; urgency=low
+
+  * Sync homedirectory of the nagios user with the nagios3 package 
+    (Closes: #479051)
+  * Removed now empty nagios-nrpe-plugins.post* scripts 
+
+ -- Alexander Wirt <formorer@debian.org>  Sat, 21 Mar 2009 09:33:39 +0100
+
+nagios-nrpe (2.12-2) unstable; urgency=low
+
+  * Add myself to uploaders.
+  * Clean buffer before use (Closes: #498749).
+  * Remove pid file before creating a new ones (Closes: #411046).
+  * Include inetd support (Closes: #409772).
+
+ -- Luk Claes <luk@debian.org>  Sun, 14 Sep 2008 16:04:17 +0200
+
+nagios-nrpe (2.12-1) unstable; urgency=low
+
+  * Support an nrpe.d config directory in addition to nrpe_local.cfg 
+    (Closes: #474333)
+  * Add myself to uploaders
+  * Add watch file 
+  * New upstream version (Closes: #475081)
+  * Acknowledge NMU from Chris Lamb (Closes: #484412) 
+  * Recommend Nagios 3 instead of Nagios 2 
+  * Update copyright file
+  * Use the same homedir as nagios3 (Closes: #479051)
+
+ -- Alexander Wirt <formorer@debian.org>  Wed, 06 Aug 2008 20:33:57 +0200
+
+nagios-nrpe (2.8.1-1.1) unstable; urgency=medium
+
+  * Non-maintainer upload.
+  * Fix bashism in debian/rules (Closes: #484412)
+  * Bump Standards-Version to 3.8.0.
+
+ -- Chris Lamb <chris@chris-lamb.co.uk>  Sat, 12 Jul 2008 01:09:21 +0100
+
+nagios-nrpe (2.8.1-1) unstable; urgency=low
+
+  * New upstream release
+  * bump Recommends to nagios2, thanks to Henning Sprang
+    for suggesting this (closes: #399856).
+  * fix typo in package description, thanks to Tilman Koschnick for
+    noticing this (closes: #419130).
+
+ -- sean finney <seanius@debian.org>  Sat, 12 May 2007 12:27:30 +0200
+
+nagios-nrpe (2.5.1-3) unstable; urgency=high
+
+  * apparently we were already including another default file
+    without installing it, and some people were using it.  so
+    now we include this one as well as the new default, with this
+    one taking precedence since it was there first.  thanks to
+    Peter Palfrader for catching this (closes: #398914).
+
+ -- sean finney <seanius@debian.org>  Fri, 17 Nov 2006 09:17:55 +0100
+
+nagios-nrpe (2.5.1-2) unstable; urgency=low
+
+  * include a /etc/default/nagios-nrpe-server where variables
+    such as DAEMON_OPTS can be set (closes: #396709).
+  * bump standards version to 3.7.2
+  * add pre-depends on adduser
+  * LSB-ize init script, and add dependency on lsb-base
+
+ -- sean finney <seanius@debian.org>  Sat, 04 Nov 2006 17:38:34 +0100
+
+nagios-nrpe (2.5.1-1) unstable; urgency=low
+
+  * new upstream release.  includes fix from Peter Palfrader to catch
+    invalid free()'s when nrpe is called with --no-ssl (closes: #361233).
+
+ -- sean finney <seanius@debian.org>  Sun, 14 May 2006 21:38:48 -0500
+
+nagios-nrpe (2.4-2) unstable; urgency=low
+
+  [sean finney]
+  * removing nrpe_local.cfg caused trouble for some people, so
+    i've added it back in (closes: #360093).
+
+ -- sean finney <seanius@debian.org>  Fri, 31 Mar 2006 07:02:31 +0200
+
+nagios-nrpe (2.4-1) unstable; urgency=low
+
+  * new upstream release.
+
+  [sean finney]
+  * (NEEDS TESTING) move away from cdbs for my own sanity.
+  * add build-dependency on dpatch.
+  * no longer create nrpe_local.cfg.  no reason to have it.
+  * remove postinst script for nagios-nrpe-server, as all it
+    did was touch the previously mentioned file.
+  * upstream has incorporated the following patches:
+    - 02_global-cmd-prefix.dpatch
+    - 03_nrpe-trailing-whitespace.dpatch
+  * check_nrpe -h provides what "-a" does, but i've gone ahead and
+    added a comment in check_nrpe.cfg too, because it can't hurt
+    to do so :) (closes: #351714).
+  * no longer generate the nagios-nrpe-doc package, and move copies of
+    the documentation into the plugin and server packages.  add a
+    Conflicts: nagios-nrpe-doc to the remaining packages to ensure
+    that the stale package doesn't remain.  NEWS.Debian also mentions
+    this and instructs the admin to purge the package too.
+
+ -- sean finney <seanius@debian.org>  Tue, 24 Jan 2006 18:16:54 +0100
+
+nagios-nrpe (2.2-1) unstable; urgency=low
+
+  * new upstream release.
+
+  [sean finney]
+  * debian packaging source repository is now migrated to svn.
+  * updated 01_nodevrandom-and-docoptions.dpatch and
+    02_global-cmd-prefix.dpatch to apply against the latest
+    upstream version.
+  * nrpe.cfg has moved location in the upstream tarball.
+  * introduced 03_nrpe-trailing-whitespace.dpatch to fix regression
+    in config file parsing until upstream incorporates it.
+
+ -- sean finney <seanius@debian.org>  Tue, 24 Jan 2006 17:52:54 +0100
+
+nagios-nrpe (2.0-9) unstable; urgency=low
+
+  * Sean Finney:
+    - nagios-nrpe has now joined forces with the debian pkg-nagios
+      project, updated Maintainer and Uploaders field accordingly.
+    - provide check_nrpe_1arg command definition so that one can call
+      check_nrpe both with and without arguments to the cmds 
+      (closes: #248424).
+    - changed nagios-nrpe-server's Recommends on nagios-plugins to reflect
+      the upcoming new nagios-plugins layout.
+    - changed nagios-nrpe-plugin's Depends on nagios to a Recommends.
+    - building issues seem to be resolved on arm now (closes: #259442).
+    - updated Standards-Version to 3.6.2
+    - included patch from joerg and weasel to document some cmdline options
+      and provide a better alternative to reading a random byte from
+      /dev/random (closes: #333552).
+    - included "global command prefix" patch from joerg jaspert
+      (closes: #332253).
+
+ -- sean finney <seanius@debian.org>  Tue, 25 Oct 2005 10:04:59 -0400
+
+nagios-nrpe (2.0-8) unstable; urgency=low
+
+  * debian/control: change depends on nagios-plugins, to recommends.
+    (closes: #327199)
+
+ -- Jason Thomas <jason@debian.org>  Mon, 10 Oct 2005 08:07:57 +1000
+
+nagios-nrpe (2.0-7) unstable; urgency=high
+
+  * The previous upload fixes a bug that breaks the install of this package so
+    this is a new upload with a high urgency to try and get it into sarge.
+
+ -- Jason Thomas <jason@debian.org>  Thu, 19 Aug 2004 22:47:40 +1000
+
+nagios-nrpe (2.0-6) unstable; urgency=low
+
+  * nagios plugin config dir changed to etc/nagios-plugins/configs/
+    (closes: #266826)
+
+ -- Jason Thomas <jason@debian.org>  Thu, 19 Aug 2004 21:17:28 +1000
+
+nagios-nrpe (2.0-5) unstable; urgency=low
+
+  * debian/nagios-nrpe-server.preinst: added code to create nagios user and
+    group.
+    (closes: #248995, #241168)
+
+ -- Jason Thomas <jason@debian.org>  Sat, 15 May 2004 12:02:35 +1000
+
+nagios-nrpe (2.0-4) unstable; urgency=low
+
+  * debian/nagios-nrpe-server.init.d: added missing -d to restart.
+    (closes: #248797)
+  * debian/nrpe.1: renamed to nrpe.8
+  * debian/nagios-nrpe-server.manpages: changed nrpe.1 to nrpe.8
+  * debian/dirs: deleted it as its not needed. 
+
+ -- Jason Thomas <jason@debian.org>  Fri, 14 May 2004 14:05:03 +1000
+
+nagios-nrpe (2.0-3) unstable; urgency=low
+
+  * debian/nagios-nrpe-server.init.d: added --oknodo to stop commands which
+    will make upgrades and purges clean.
+
+ -- Jason Thomas <jason@debian.org>  Wed, 24 Mar 2004 13:09:00 +1100
+
+nagios-nrpe (2.0-2) unstable; urgency=low
+
+  * debian/control: added build-depends cdbs
+    (closes: #230943)
+  * debian/control: nagios-nrpe-server now conflicts netsaint-nrpe-server
+    (closes: #230303)
+
+ -- Jason Thomas <jason@debian.org>  Wed, 11 Feb 2004 09:27:01 +1100
+
+nagios-nrpe (2.0-1) unstable; urgency=low
+
+  * Initial Release.
+    (closes: #209124)
+
+ -- Jason Thomas <jason@debian.org>  Wed, 14 Jan 2004 16:13:36 +1100
+

debian/check_nrpe.cfg

@@ -0,0 +1,11 @@
+# this command runs a program $ARG1$ with no arguments and enables SSL support
+define command {
+	command_name	check_nrpe
+	command_line	/usr/lib/nagios/plugins/check_nrpe -H $HOSTADDRESS$ -c $ARG1$
+}
+
+# this command runs a program $ARG1$ with no arguments and disables SSL support
+define command {
+	command_name	check_nrpe_nossl
+	command_line	/usr/lib/nagios/plugins/check_nrpe -H $HOSTADDRESS$ -c $ARG1$ -n
+}

debian/compat

@@ -0,0 +1 @@
+9

debian/control

@@ -0,0 +1,47 @@
+Source: nagios-nrpe
+Maintainer: Debian Nagios Maintainer Group <pkg-nagios-devel@lists.alioth.debian.org>
+Uploaders: Bas Couwenberg <sebastic@debian.org>
+Section: net
+Priority: optional
+Build-Depends: debhelper (>= 9),
+               dh-autoreconf,
+               dh-systemd | debhelper (>= 9.20160709),
+               libssl-dev,
+               libwrap0-dev,
+               openssl
+Standards-Version: 4.0.0
+Vcs-Browser: https://anonscm.debian.org/cgit/pkg-nagios/pkg-nrpe.git
+Vcs-Git: https://anonscm.debian.org/git/pkg-nagios/pkg-nrpe.git
+Homepage: https://github.com/NagiosEnterprises/nrpe
+
+Package: nagios-nrpe-server
+Architecture: any
+Depends: lsb-base,
+         ${shlibs:Depends},
+         ${misc:Depends}
+Recommends: monitoring-plugins-basic | monitoring-plugins
+Suggests: xinetd | inetd
+Pre-Depends: adduser
+Conflicts: nagios-nrpe-doc
+Description: Nagios Remote Plugin Executor Server
+ Nagios is a host/service/network monitoring and management system.
+ .
+ The purpose of this addon is to allow you to execute Nagios plugins on a
+ remote host in as transparent a manner as possible.
+ .
+ This program runs as a background process on the remote host and processes
+ command execution requests from the check_nrpe plugin on the Nagios host.
+
+Package: nagios-nrpe-plugin
+Architecture: any
+Depends: ${shlibs:Depends},
+         ${misc:Depends}
+Conflicts: nagios-nrpe-doc
+Description: Nagios Remote Plugin Executor Plugin
+ Nagios is a host/service/network monitoring and management system.
+ .
+ The purpose of this addon is to allow you to execute Nagios plugins on a
+ remote host in as transparent a manner as possible.
+ .
+ This is a plugin that is run on the Nagios host and is used to contact the
+ NRPE process on remote hosts.

debian/copyright

@@ -0,0 +1,79 @@
+Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: NRPE
+Upstream-Contact: Nagios Users List <nagios-users@lists.nagios.com>
+Source: https://github.com/NagiosEnterprises/nrpe
+
+Files: *
+Copyright: 2006-2017, Nagios Enterprises
+                2016, Nagios Core Development Team
+           1999-2008, Ethan Galstad (nagios@nagios.org)
+License: GPL-2+ with OpenSSL exception
+
+Files: include/acl.h
+ src/acl.c
+Copyright: 2011, Kaspersky Lab ZAO
+License: GPL-2+
+
+Files: src/snprintf.c
+Copyright: Patrick Powell 1995
+License: attribution
+ This code is based on code written by Patrick Powell (papowell@astart.com)
+ It may be used for any purpose as long as this notice remains intact
+ on all source code distributions
+
+Files: debian/*
+Copyright: 2004, Jason Thomas <jason@debian.org>
+License: GPL-2+
+
+License: GPL-2+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+ .
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ .
+ On Debian systems, the complete text of version 2 of the GNU General
+ Public License can be found in `/usr/share/common-licenses/GPL-2'.
+
+License: GPL-2+ with OpenSSL exception
+ This program is free software; you can redistribute it
+ and/or modify it under the terms of the GNU General Public
+ License as published by the Free Software Foundation; either
+ version 2 of the License, or (at your option) any later
+ version.
+ .
+ In addition, as a special exception, the author of this
+ program gives permission to link the code of its
+ release with the OpenSSL project's "OpenSSL" library (or
+ with modified versions of it that use the same license as
+ the "OpenSSL" library), and distribute the linked
+ executables. You must obey the GNU General Public
+ License in all respects for all of the code used other
+ than "OpenSSL".  If you modify this file, you may extend
+ this exception to your version of the file, but you are
+ not obligated to do so.  If you do not wish to do so,
+ delete this exception statement from your version.
+ .
+ This program is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ PURPOSE.  See the GNU General Public License for more
+ details.
+ .
+ You should have received a copy of the GNU General Public
+ License along with this package; if not, write to the Free
+ Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+ Boston, MA  02110-1301 USA
+ .
+ On Debian systems, the full text of the GNU General Public
+ License version 2 can be found in the file
+ `/usr/share/common-licenses/GPL-2'.
+

debian/dirs

@@ -0,0 +1 @@
+/etc/nagios/nrpe.d

debian/gbp.conf

@@ -0,0 +1,16 @@
+[DEFAULT]
+
+# The default name for the upstream branch is "upstream".
+# Change it if the name is different (for instance, "master").
+upstream-branch = upstream
+
+# The default name for the Debian branch is "master".
+# Change it if the name is different (for instance, "debian/unstable").
+debian-branch = master
+
+# git-import-orig uses the following names for the upstream tags.
+# Change the value if you are not using git-import-orig
+upstream-tag = upstream/%(version)s
+
+# Always use pristine-tar.
+pristine-tar = True

debian/nagios-nrpe-plugin.install

@@ -0,0 +1,2 @@
+src/check_nrpe        usr/lib/nagios/plugins/
+debian/check_nrpe.cfg etc/nagios-plugins/config/

debian/nagios-nrpe-plugin.postrm

@@ -0,0 +1,9 @@
+#!/bin/sh
+set -e
+
+if [ "$1" = purge ]; then
+	test -d /var/lib/nagios && rmdir /var/lib/nagios || true #ignore non-failure errors 
+fi
+
+#DEBHELPER#
+

debian/nagios-nrpe-server.default

@@ -0,0 +1,16 @@
+# defaults file for nagios-nrpe-server
+# (this file is a /bin/sh compatible fragment)
+
+# NRPE_OPTS are any extra cmdline parameters you'd like to pass along to the
+# nrpe daemon.
+#
+# The -n option disables SSL support.
+#NRPE_OPTS="-n"
+
+# NICENESS is if you want to run the server at a different nice() priority.
+# (only used by the init script)
+#NICENESS=5
+
+# INETD is if you want to run the server via inetd (default=0, run as daemon).
+# (only used by the init script)
+#INETD=0

debian/nagios-nrpe-server.doc-base

@@ -0,0 +1,6 @@
+Document: nagios-nrpe
+Title: NRPE Documentation
+Section: Network/Monitoring
+
+Format: PDF
+Files: /usr/share/doc/nagios-nrpe-server/*.pdf.gz

debian/nagios-nrpe-server.docs

@@ -0,0 +1,5 @@
+LEGAL
+README.md
+README.SSL.md
+SECURITY.md
+docs/*

debian/nagios-nrpe-server.init

@@ -0,0 +1,85 @@
+#! /bin/sh
+#
+
+### BEGIN INIT INFO
+# Provides:          nagios-nrpe-server
+# Required-Start:    $local_fs $remote_fs $syslog $named $network $time
+# Required-Stop:     $local_fs $remote_fs $syslog $named $network
+# Should-Start:
+# Should-Stop:
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Start/Stop the Nagios remote plugin execution daemon
+### END INIT INFO
+
+
+PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
+DAEMON=/usr/sbin/nrpe
+NAME=nagios-nrpe
+DESC=nagios-nrpe
+CONFIG=/etc/nagios/nrpe.cfg
+PIDDIR=/var/run/nagios
+
+test -x $DAEMON || exit 0
+
+if ! [ -x "/lib/lsb/init-functions" ]; then
+	. /lib/lsb/init-functions
+else
+	echo "E: /lib/lsb/init-functions not found, lsb-base (>= 3.0-6) needed"
+	exit 1
+fi
+
+# Include nagios-nrpe defaults if available
+if [ -f /etc/default/nagios-nrpe-server ] ; then
+	. /etc/default/nagios-nrpe-server
+fi
+# we also used to include this file, so if it's there
+# we include it as well
+if [ -f /etc/default/nagios-nrpe ]; then
+	. /etc/default/nagios-nrpe
+fi
+if [ "$NICENESS" ]; then NICENESS="-n $NICENESS"; fi
+
+#since /var/run can be wiped completly we create our run directory here
+if [ ! -d "$PIDDIR" ]; then 
+	mkdir "$PIDDIR"
+	chown nagios "$PIDDIR"
+    [ -x /sbin/restorecon ] && /sbin/restorecon "$PIDDIR"
+fi
+
+set -e
+
+case "$1" in
+  start)
+	if [ "$INETD" = 1 ]; then
+		exit 0
+	fi
+	log_daemon_msg "Starting $DESC" "$NAME"
+	start_daemon -p $PIDDIR/nrpe.pid $NICENESS $DAEMON  -c $CONFIG -d $NRPE_OPTS
+	log_end_msg $?
+	;;
+  stop)
+	log_daemon_msg "Stopping $DESC" "$NAME"
+	start-stop-daemon --stop --quiet --oknodo --pidfile $PIDDIR/nrpe.pid --retry 15
+	log_end_msg $?
+	;;
+  reload|force-reload)
+	log_daemon_msg "Reloading $DESC configuration files" "$NAME"
+	start-stop-daemon --stop --signal HUP --quiet --pidfile $PIDDIR/nrpe.pid
+	log_end_msg $?
+	;;
+  status)
+    status_of_proc -p $PIDDIR/nrpe.pid "$DAEMON" "$NAME" && exit 0 || exit $?
+    ;;
+  restart)
+	$0 stop
+	sleep 1
+	$0 start
+	;;
+  *)
+	log_failure_msg "Usage: $N {start|stop|restart|reload|force-reload}" 
+	exit 1
+	;;
+esac
+
+exit 0

debian/nagios-nrpe-server.install

@@ -0,0 +1,3 @@
+src/nrpe               usr/sbin
+sample-config/nrpe.cfg etc/nagios
+debian/nrpe_local.cfg  etc/nagios

debian/nagios-nrpe-server.manpages

@@ -0,0 +1 @@
+debian/nrpe.8

debian/nagios-nrpe-server.preinst

@@ -0,0 +1,55 @@
+#! /bin/sh
+# preinst script for nagios-nrpe-server
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <new-preinst> `install'
+#        * <new-preinst> `install' <old-version>
+#        * <new-preinst> `upgrade' <old-version>
+#        * <old-preinst> `abort-upgrade' <new-version>
+#
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    install|upgrade)
+	if id nagios >/dev/null 2>&1 ; then
+		# We have a nagios user.
+		if [ `id nagios -g -n` != "nagios" ] ; then
+			addgroup --system nagios || true
+			#this can fail sometimes (i.e. with LDAP) so ignore it
+			usermod -g nagios nagios || true
+		fi
+	else
+		adduser --system --group --home /var/lib/nagios --quiet nagios
+	fi
+
+#        if [ "$1" = "upgrade" ]
+#        then
+#            start-stop-daemon --stop --quiet --oknodo  \
+#                --pidfile /var/run/bud.pid  \
+#                --exec /usr/sbin/bud 2>/dev/null || true
+#        fi
+    ;;
+
+    abort-upgrade)
+    ;;
+
+    *)
+        echo "preinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+

debian/nagios-nrpe-server.service

@@ -0,0 +1,23 @@
+[Unit]
+Description=Nagios Remote Plugin Executor
+Documentation=http://www.nagios.org/documentation
+After=var-run.mount nss-lookup.target network.target local-fs.target remote-fs.target time-sync.target
+Before=getty@tty1.service plymouth-quit.service xdm.service
+Conflicts=nrpe.socket
+
+[Install]
+WantedBy=multi-user.target
+
+[Service]
+Type=simple
+Restart=on-abort
+PIDFile=/var/run/nagios/nrpe.pid
+EnvironmentFile=-/etc/default/nagios-nrpe-server
+ExecStart=/usr/sbin/nrpe -c /etc/nagios/nrpe.cfg -f $NRPE_OPTS
+ExecReload=/bin/kill -HUP $MAINPID
+ExecStopPost=/bin/rm -f /var/run/nagios/nrpe.pid
+TimeoutStopSec=60
+User=nagios
+Group=nagios
+PrivateTmp=true
+OOMScoreAdjust=-500

debian/nagios-nrpe-server.tmpfile

@@ -0,0 +1,2 @@
+#Type	Path		Mode	UID	GID	Age	Argument
+d	/var/run/nagios	0755	nagios	nagios	-	-

debian/nrpe.8

@@ -0,0 +1,60 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH NAGIOS-NRPE 8 "January 14, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+nrpe \- Nagios Remote Plugin Executor - Server
+.SH SYNOPSIS
+.B nagios-nrpe
+\fI[-n] -c <config_file> [-4|-6] <mode>\fR
+.SH DESCRIPTION
+.PP
+The purpose of this addon is to allow you to execute Nagios plugins on a
+remote host in as transparent a manner as possible.
+.PP
+This program runs as a background process on the remote host and processes
+command execution requests from the check_nrpe plugin on the Nagios host.
+.SH OPTIONS
+.TP
+\fB\-n\fR               = Do not use SSL
+.TP
+\fB\-c\fR <config_file> = Name of config file to use
+.TP
+\fB\-4\fR               = Use IPv4 only
+.TP
+\fB\-6\fR               = Use IPv6 only
+.TP
+<mode>           = One of the following two operating modes:
+.TP
+  \fB\-i\fR             =    Run as a service under inetd or xinetd
+.TP
+  \fB\-d\fR             =    Run as a standalone daemon
+.TP
+  \fB\-d \-s\fR          =    Run as a subsystem under AIX
+.TP
+  \fB\-f\fR             =    Don't fork() for systemd, launchd, etc.
+.PP
+Notes:
+This program is designed to process requests from the check_nrpe
+plugin on the host(s) running Nagios.  It can run as a service
+under inetd or xinetd (read the docs for info on this), or as a
+standalone daemon. Once a request is received from an authorized
+host, NRPE will execute the command/plugin (as defined in the
+config file) and return the plugin output and return code to the
+check_nrpe plugin.
+.SH AUTHOR
+This manual page was written by Jason Thomas <jason@debian.org>,
+for the Debian project (but may be used by others).

debian/nrpe_local.cfg

@@ -0,0 +1,3 @@
+######################################
+# Do any local nrpe configuration here
+######################################

debian/patches/02_nrpe.cfg_local-include_support_nrpe.d.patch

@@ -0,0 +1,24 @@
+Description: Support nrpe_local.cfg & nrpe.d directory.
+Author: Sean Finney <seanius@debian.org>
+Author: Alexander Wirt <formorer@debian.org>
+Forwarded: not-needed
+
+--- a/sample-config/nrpe.cfg.in
++++ b/sample-config/nrpe.cfg.in
+@@ -359,3 +359,16 @@ command[check_total_procs]=@pluginsdir@/
+ 
+ #include_dir=<somedirectory>
+ #include_dir=<someotherdirectory>
++
++
++
++# local configuration:
++# if you'd prefer, you can instead place directives here
++
++include=/etc/nagios/nrpe_local.cfg
++
++# you can place your config snipplets into nrpe.d/
++# only snipplets ending in .cfg will get included
++
++include_dir=/etc/nagios/nrpe.d/
++

debian/patches/07_warn_ssloption.patch

@@ -0,0 +1,28 @@
+Description: Warn against inadequateness of NRPE's own SSL option.
+Author: Thijs Kinkhorst <thijs@debian.org>
+Forwarded: not-needed
+
+--- a/SECURITY.md
++++ b/SECURITY.md
+@@ -91,14 +91,17 @@ Encryption
+ ----------
+ 
+ If you do enable support for command arguments in the NRPE daemon,
+-make sure that you encrypt communications either by using:
+-
+-   1.  Stunnel (see http://www.stunnel.org for more info)
+-   2.  Native SSL support (See the [SSL Readme](README.SSL.md) file for more info)
++make sure that you encrypt communications by using, for example,
++Stunnel (see http://www.stunnel.org for more info).
+ 
+ Do **NOT** assume that just because the daemon is behind a firewall
+ that you are safe! ***Always encrypt NRPE traffic!***
+ 
++NOTE: the currently shipped native SSL support of NRPE is not an
++adequante protection, because it does not verify clients and
++server, and uses pregenerated key material. NRPE's SSL option is
++advised against. For more information, see Debian bug #547092.
++
+ 
+ Using Arguments
+ ---------------

debian/patches/11_reproducible_dh.h.patch

@@ -0,0 +1,79 @@
+Description: Use pre-generated dh.h for reproducible builds.
+Author: Bas Couwenberg <sebastic@debian.org>
+Bug-Debian: https://bugs.debian.org/834857
+Forwarded: not-needed
+
+--- /dev/null
++++ b/include/dh.h
+@@ -0,0 +1,53 @@
++#ifndef HEADER_DH_H
++# include <openssl/dh.h>
++#endif
++
++DH *get_dh2048()
++{
++    static unsigned char dhp_2048[] = {
++	0xD0, 0x0A, 0x1E, 0x0E, 0x73, 0xE5, 0x51, 0xC3, 0x6C, 0xAA, 
++	0x7F, 0x6B, 0x9C, 0x9D, 0x47, 0x26, 0xAA, 0x25, 0x2B, 0x73, 
++	0xCD, 0x93, 0x94, 0xA2, 0xEA, 0x56, 0x14, 0xD4, 0x42, 0x48, 
++	0x21, 0x61, 0xF9, 0xA1, 0xB7, 0x88, 0xA7, 0xDA, 0x8B, 0xD8, 
++	0xFF, 0x12, 0x8D, 0x50, 0x2D, 0x1D, 0x40, 0xAB, 0xFD, 0x97, 
++	0x89, 0x18, 0x1D, 0x57, 0x69, 0xD3, 0x68, 0xBF, 0x68, 0xA1, 
++	0x20, 0xAD, 0x80, 0xFF, 0xB4, 0xE3, 0xC6, 0xC9, 0x5A, 0x62, 
++	0x23, 0x39, 0x45, 0x79, 0x8D, 0x03, 0x45, 0x55, 0xEB, 0xCA, 
++	0x34, 0x37, 0x44, 0x4B, 0x9C, 0xFF, 0x3B, 0xA7, 0xA4, 0xD3, 
++	0x2A, 0xD6, 0x96, 0x41, 0x6C, 0x58, 0x19, 0x9E, 0x89, 0xD3, 
++	0xB9, 0x36, 0xB0, 0x07, 0xD2, 0x9C, 0xFE, 0xFD, 0x3E, 0x4E, 
++	0x38, 0x71, 0x2C, 0xB2, 0xE8, 0x54, 0x83, 0x8A, 0xFA, 0x57, 
++	0xE2, 0x2B, 0x62, 0xD6, 0x0D, 0x66, 0x01, 0xE2, 0x46, 0xAD, 
++	0x64, 0x5B, 0x57, 0x5C, 0xED, 0x43, 0x97, 0x58, 0xA9, 0x93, 
++	0x4C, 0xCA, 0xAC, 0x4C, 0xB1, 0xBB, 0xD0, 0xDC, 0xF8, 0xEC, 
++	0x4A, 0x5A, 0xBB, 0xF5, 0x44, 0x70, 0x69, 0xC4, 0x51, 0xA8, 
++	0x0D, 0x47, 0x59, 0x19, 0x57, 0x7A, 0x71, 0x3D, 0x65, 0xB7, 
++	0x55, 0x27, 0x87, 0x44, 0xC0, 0x45, 0x87, 0xA7, 0x0B, 0x73, 
++	0x8D, 0x31, 0xFD, 0xE5, 0xA2, 0xDA, 0x99, 0x6D, 0xC0, 0x51, 
++	0xA3, 0x63, 0x73, 0x76, 0x91, 0x38, 0x5C, 0x57, 0x0B, 0x26, 
++	0x08, 0xC1, 0x66, 0x9F, 0x2D, 0xBE, 0x86, 0x44, 0x1B, 0xD2, 
++	0x40, 0x07, 0xB5, 0x7D, 0x15, 0x4A, 0xDA, 0x5F, 0x89, 0xE9, 
++	0xE7, 0x48, 0xDE, 0x0E, 0x3A, 0xA9, 0xF5, 0x60, 0x3C, 0x32, 
++	0x08, 0x40, 0xAF, 0xF0, 0x83, 0x74, 0xB3, 0x97, 0x44, 0x2E, 
++	0x2F, 0xE8, 0x67, 0x70, 0xA2, 0xAC, 0x94, 0xD9, 0x75, 0xBF, 
++	0x4F, 0x75, 0x8B, 0x2A, 0x1B, 0x1B
++    };
++    static unsigned char dhg_2048[] = {
++	0x02
++    };
++    DH *dh = DH_new();
++    BIGNUM *dhp_bn, *dhg_bn;
++
++    if (dh == NULL)
++        return NULL;
++    dhp_bn = BN_bin2bn(dhp_2048, sizeof (dhp_2048), NULL);
++    dhg_bn = BN_bin2bn(dhg_2048, sizeof (dhg_2048), NULL);
++    if (dhp_bn == NULL || dhg_bn == NULL
++            || !DH_set0_pqg(dh, dhp_bn, NULL, dhg_bn)) {
++        DH_free(dh);
++        BN_free(dhp_bn);
++        BN_free(dhg_bn);
++        return NULL;
++    }
++    return dh;
++}
+--- a/macros/ax_nagios_get_ssl
++++ b/macros/ax_nagios_get_ssl
+@@ -288,15 +288,7 @@ if test x$SSL_TYPE != xNONE; then
+ 		# Find the openssl program
+ 
+ 		if test x$need_dh = xyes; then
+-			AC_PATH_PROG(sslbin,openssl,value-if-not-found,$ssl_dir/sbin$PATH_SEPARATOR$ssl_dir/bin$PATH_SEPARATOR$PATH)
+ 			AC_DEFINE(USE_SSL_DH)
+-			# Generate DH parameters
+-			if test -f "$sslbin"; then
+-				echo ""
+-				echo "*** Generating DH Parameters for SSL/TLS ***"
+-				# awk to strip off meta data at bottom of dhparam output
+-				$sslbin dhparam -C 2048 | awk '/^-----/ {exit} {print}' > include/dh.h
+-			fi
+ 		fi
+ 	fi
+ fi

debian/patches/series

@@ -0,0 +1,3 @@
+02_nrpe.cfg_local-include_support_nrpe.d.patch
+07_warn_ssloption.patch
+

debian/rules

@@ -0,0 +1,33 @@
+#!/usr/bin/make -f
+
+# newer dpkg set this by default.
+DEB_HOST_MULTIARCH ?= $(shell dpkg-architecture -qDEB_HOST_MULTIARCH)
+
+# Enable hardening build flags
+export DEB_BUILD_MAINT_OPTIONS=hardening=+all
+
+CFLAGS += $(CPPFLAGS)
+
+export AUTOHEADER=true
+
+%:
+	    dh $@ --with autoreconf,systemd --parallel
+
+override_dh_auto_configure:
+	dh_auto_configure -- \
+		--prefix=/usr \
+		--sysconfdir=/etc \
+		--libdir=/usr/lib/nagios \
+		--libexecdir=/usr/lib/nagios/plugins \
+		--localstatedir=/var \
+		--enable-ssl \
+		--with-logdir=/var/log \
+		--with-ssl-lib=/usr/lib/$(DEB_HOST_MULTIARCH) \
+		--with-piddir=/var/run/nagios \
+		--enable-command-args \
+		--enable-bash-command-substitution
+
+override_dh_auto_build:
+	dh_auto_build -- all
+
+override_dh_auto_install:

debian/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/tests/control

@@ -0,0 +1,3 @@
+# Test installability
+Depends: @
+Test-Command: /bin/true

debian/upstream/metadata

@@ -0,0 +1,6 @@
+---
+Bug-Database: https://github.com/NagiosEnterprises/nrpe/issues
+Bug-Submit: https://github.com/NagiosEnterprises/nrpe/issues/new
+Name: NRPE
+Repository: https://github.com/NagiosEnterprises/nrpe.git
+Repository-Browse: https://github.com/NagiosEnterprises/nrpe

debian/watch

@@ -0,0 +1,7 @@
+version=3
+opts=\
+dversionmangle=s/\+(debian|dfsg|ds|deb)\d*$//,\
+uversionmangle=s/(\d)[_\.\-\+]?((RC|rc|pre|dev|beta|alpha)\d*)$/$1~$2/;s/RC/rc/;s/-/./g,\
+filenamemangle=s/(?:.*?)?(?:rel|v|nrpe)?[\-\_]?(\d\S+)\.(tgz|tbz|txz|(?:tar\.(?:gz|bz2|xz)))/nrpe-$1.$2/ \
+https://github.com/NagiosEnterprises/nrpe/releases \
+(?:.*?/archive\/)?(?:rel|v|nrpe)?[\-\_]?(\d\S+)\.(?:tgz|tbz|txz|(?:tar\.(?:gz|bz2|xz)))