From f32158b58f9366257df33d52f6ddb5b584dc8335 Mon Sep 17 00:00:00 2001 From: geos_one Date: Thu, 23 Jun 2011 01:19:42 +0000 Subject: [PATCH] create opsi repository git-svn-id: https://svn.disconnected-by-peer.at/svn/linamh/trunk/opsi@2955 6952d904-891a-0410-993b-d76249ca496b --- header.txt | 4 + profiles/package.mask | 8 ++ profiles/repo_name | 1 + profiles/use.desc | 6 ++ profiles/use.local.desc | 9 +++ sets.conf | 5 ++ skel.ChangeLog | 67 ++++++++++++++++ skel.ebuild | 169 ++++++++++++++++++++++++++++++++++++++++ skel.metadata.xml | 34 ++++++++ 9 files changed, 303 insertions(+) create mode 100644 header.txt create mode 100644 profiles/package.mask create mode 100644 profiles/repo_name create mode 100644 profiles/use.desc create mode 100644 profiles/use.local.desc create mode 100644 sets.conf create mode 100644 skel.ChangeLog create mode 100644 skel.ebuild create mode 100644 skel.metadata.xml diff --git a/header.txt b/header.txt new file mode 100644 index 0000000..46af726 --- /dev/null +++ b/header.txt @@ -0,0 +1,4 @@ +# Copyright 1999-2009 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: $ + diff --git a/profiles/package.mask b/profiles/package.mask new file mode 100644 index 0000000..24a4ab7 --- /dev/null +++ b/profiles/package.mask @@ -0,0 +1,8 @@ +##################################################################### +# $Header: $ +# When you add an entry to this file, add your name, the date, and an +# explanation of why something is getting masked +# +# NOTE: Please add your entry at the top! +# + diff --git a/profiles/repo_name b/profiles/repo_name new file mode 100644 index 0000000..799caaf --- /dev/null +++ b/profiles/repo_name @@ -0,0 +1 @@ +zarafa \ No newline at end of file diff --git a/profiles/use.desc b/profiles/use.desc new file mode 100644 index 0000000..97aa7e2 --- /dev/null +++ b/profiles/use.desc @@ -0,0 +1,6 @@ +# Copyright 1999-2007 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: $ + +# Keep them sorted + diff --git a/profiles/use.local.desc b/profiles/use.local.desc new file mode 100644 index 0000000..89aaa87 --- /dev/null +++ b/profiles/use.local.desc @@ -0,0 +1,9 @@ +# Copyright 1999-2007 Gentoo Foundation. +# Distributed under the terms of the GNU General Public License v2 +# $Header: $ + +# This file contains descriptions of local USE flags, and the ebuilds which +# contain them. + +# Keep it sorted. + diff --git a/sets.conf b/sets.conf new file mode 100644 index 0000000..aa3ff90 --- /dev/null +++ b/sets.conf @@ -0,0 +1,5 @@ +[zarafa sets] +class = portage.sets.files.StaticFileSet +multiset = true +directory = ${repository:opsi}/sets/ + diff --git a/skel.ChangeLog b/skel.ChangeLog new file mode 100644 index 0000000..c3d77a8 --- /dev/null +++ b/skel.ChangeLog @@ -0,0 +1,67 @@ +# ChangeLog for / +# Copyright 1999-2009 Gentoo Foundation; Distributed under the GPL v2 +# $Header: $ + +*-- (DD MMM YYYY) + + DD MMM YYYY; YOUR_NAME changed_file1, changed_file2 : + Initial import. Ebuild submitted by submitter_name . + Note that the "changed_file" listing is optional if you are simply bumping + the rev of the ebuild and are only making changes to the .ebuild file + itself. Also note that we now have a single unified paragraph rather than + having the first line separated from the rest by a newline. Everything + should be in one block like this. (note by drobbins, 16 Jul 2002) + + DD MMM YYYY; YOUR_NAME changed_file1, changed_file2: this is + an earlier ChangeLog entry. + +-- Explanation of ChangeLog format: + + *************************************************************************** + THIS IS IMPORTANT: The ChangeLog format is a *chronological* account of all + changes made to a set of ebuilds. That means that the most recent ChangeLog + entry *always* goes at the top of the file. More explanation below. + *************************************************************************** + + *************************************************************************** + ANOTHER IMPORTANT NOTE: There are some ChangeLogs that don't follow this + format and organize all changes under the "correct" "*" entry. This is not + correct. However, rather than making a concerted effort to fix these + ChangeLogs, we should spend our energy defining a comprehensive and strict + XML-based ChangeLog format which we then migrate to. But for any entries to + any ChangeLog that *you* make, please make sure to always add entries to the + top of the file like a good boy/girl. Even do this if it's clear that you're + adding an entry to a b0rked ChangeLog. + *************************************************************************** + + This changelog is targeted to users. This means that the comments should be + well explained and written in clean English. + + Every new version or revision of the package should be marked by a '*' + separator line as above to indicate where in the chronology it was first + added to our CVS tree. Any changes since the last revision, really _any + changes at all_ have to be added to the top of the file, underneath the + initial copyright and cvs header comments, in exactly the same format as this + comment. If you are modifying older ebuilds, simply note them as changed + files and add your entry to the top of the ChangeLog. Resist the temptation + to "organize" your ChangeLog entries by placing them under the "correct" "*" + entries -- this isn't the purpose of the "*" entries. + + This means that you start with header line that has the following format, + indented two spaces: + + DD MMM YYYY; your_name changed_file1, changed_file2: Your + explanation should follow. It should be indented and wrapped at a line width + of 80 characters. The changed_files can be omitted if they are obvious; for + example, if you are only modifying the .ebuild file and committing a new rev + of a package. Any details about what exactly changed in the code should be + added as a message when the changes are committed to cvs, not in this file. + +-- A word regarding credit: + + Please add credit information ("ebuild submitted by ...", "patch submitted + by ...") to the ChangeLog. Do not add this information to the ebuilds + themselves. + + And remember: Give credit where credit is due. We're all doing this for + free, so the best we can hope (and expect!) to receive is credit. diff --git a/skel.ebuild b/skel.ebuild new file mode 100644 index 0000000..f7a3536 --- /dev/null +++ b/skel.ebuild @@ -0,0 +1,169 @@ +# Copyright 1999-2009 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: $ + +# NOTE: The comments in this file are for instruction and documentation. +# They're not meant to appear with your final, production ebuild. Please +# remember to remove them before submitting or committing your ebuild. That +# doesn't mean you can't add your own comments though. + +# The 'Header' on the third line should just be left alone. When your ebuild +# will be committed to cvs, the details on that line will be automatically +# generated to contain the correct data. + +# The EAPI variable tells the ebuild format in use. +# Defaults to 0 if not specified. The current PMS draft contains details on +# a proposed EAPI=0 definition but is not finalized yet. +# Eclasses will test for this variable if they need to use EAPI > 0 features. +# Ebuilds should not define EAPI > 0 unless they absolutely need to use +# features added in that version. +#EAPI=0 + +# inherit lists eclasses to inherit functions from. Almost all ebuilds should +# inherit eutils, as a large amount of important functionality has been +# moved there. For example, the $(get_libdir) mentioned below wont work +# without the following line: +inherit eutils +# A well-used example of an eclass function that needs eutils is epatch. If +# your source needs patches applied, it's suggested to put your patch in the +# 'files' directory and use: +# +# epatch ${FILESDIR}/patch-name-here +# +# eclasses tend to list descriptions of how to use their functions properly. +# take a look at /usr/portage/eclasses/ for more examples. + +# Short one-line description of this package. +DESCRIPTION="This is a sample skeleton ebuild file" + +# Homepage, not used by Portage directly but handy for developer reference +HOMEPAGE="http://foo.bar.com/" + +# Point to any required sources; these will be automatically downloaded by +# Portage. +SRC_URI="ftp://foo.bar.com/${P}.tar.gz" + +# License of the package. This must match the name of file(s) in +# /usr/portage/licenses/. For complex license combination see the developer +# docs on gentoo.org for details. +LICENSE="" + +# The SLOT variable is used to tell Portage if it's OK to keep multiple +# versions of the same package installed at the same time. For example, +# if we have a libfoo-1.2.2 and libfoo-1.3.2 (which is not compatible +# with 1.2.2), it would be optimal to instruct Portage to not remove +# libfoo-1.2.2 if we decide to upgrade to libfoo-1.3.2. To do this, +# we specify SLOT="1.2" in libfoo-1.2.2 and SLOT="1.3" in libfoo-1.3.2. +# emerge clean understands SLOTs, and will keep the most recent version +# of each SLOT and remove everything else. +# Note that normal applications should use SLOT="0" if possible, since +# there should only be exactly one version installed at a time. +# DO NOT USE SLOT=""! This tells Portage to disable SLOTs for this package. +SLOT="0" + +# Using KEYWORDS, we can record masking information *inside* an ebuild +# instead of relying on an external package.mask file. Right now, you should +# set the KEYWORDS variable for every ebuild so that it contains the names of +# all the architectures with which the ebuild works. All of the official +# architectures can be found in the keywords.desc file which is in +# /usr/portage/profiles/. Usually you should just set this to "~x86". The ~ +# in front of the architecture indicates that the package is new and should be +# considered unstable until testing proves its stability. So, if you've +# confirmed that your ebuild works on x86 and ppc, you'd specify: +# KEYWORDS="~x86 ~ppc" +# Once packages go stable, the ~ prefix is removed. +# For binary packages, use -* and then list the archs the bin package +# exists for. If the package was for an x86 binary package, then +# KEYWORDS would be set like this: KEYWORDS="-* x86" +# DO NOT USE KEYWORDS="*". This is deprecated and only for backward +# compatibility reasons. +KEYWORDS="~x86" + +# Comprehensive list of any and all USE flags leveraged in the ebuild, +# with the exception of any ARCH specific flags, i.e. "ppc", "sparc", +# "x86" and "alpha". This is a required variable. If the ebuild doesn't +# use any USE flags, set to "". +IUSE="gnome X" + +# A space delimited list of portage features to restrict. man 5 ebuild +# for details. Usually not needed. +#RESTRICT="strip" + +# Build-time dependencies, such as +# ssl? ( >=dev-libs/openssl-0.9.6b ) +# >=dev-lang/perl-5.6.1-r1 +# It is advisable to use the >= syntax show above, to reflect what you +# had installed on your system when you tested the package. Then +# other users hopefully won't be caught without the right version of +# a dependency. +DEPEND="" + +# Run-time dependencies. Must be defined to whatever this depends on to run. +# The below is valid if the same run-time depends are required to compile. +RDEPEND="${DEPEND}" + +# Source directory; the dir where the sources can be found (automatically +# unpacked) inside ${WORKDIR}. The default value for S is ${WORKDIR}/${P} +# If you don't need to change it, leave the S= line out of the ebuild +# to keep it tidy. +#S="${WORKDIR}/${P}" + +src_compile() { + # Most open-source packages use GNU autoconf for configuration. + # The quickest (and preferred) way of running configure is: + econf || die "econf failed" + # + # You could use something similar to the following lines to + # configure your package before compilation. The "|| die" portion + # at the end will stop the build process if the command fails. + # You should use this at the end of critical commands in the build + # process. (Hint: Most commands are critical, that is, the build + # process should abort if they aren't successful.) + #./configure \ + # --host=${CHOST} \ + # --prefix=/usr \ + # --infodir=/usr/share/info \ + # --mandir=/usr/share/man || die "./configure failed" + # Note the use of --infodir and --mandir, above. This is to make + # this package FHS 2.2-compliant. For more information, see + # http://www.pathname.com/fhs/ + + # emake (previously known as pmake) is a script that calls the + # standard GNU make with parallel building options for speedier + # builds (especially on SMP systems). Try emake first. It might + # not work for some packages, because some makefiles have bugs + # related to parallelism, in these cases, use emake -j1 to limit + # make to a single process. The -j1 is a visual clue to others + # that the makefiles have bugs that have been worked around. + emake || die "emake failed" +} + +src_install() { + # You must *personally verify* that this trick doesn't install + # anything outside of DESTDIR; do this by reading and + # understanding the install part of the Makefiles. + # This is the preferred way to install. + emake DESTDIR="${D}" install || die "emake install failed" + + # When you hit a failure with emake, do not just use make. It is + # better to fix the Makefiles to allow proper parallelization. + # If you fail with that, use "emake -j1", it's still better than make. + + # For Makefiles that don't make proper use of DESTDIR, setting + # prefix is often an alternative. However if you do this, then + # you also need to specify mandir and infodir, since they were + # passed to ./configure as absolute paths (overriding the prefix + # setting). + #emake \ + # prefix="${D}"/usr \ + # mandir="${D}"/usr/share/man \ + # infodir="${D}"/usr/share/info \ + # libdir="${D}"/usr/$(get_libdir) \ + # install || die "emake install failed" + # Again, verify the Makefiles! We don't want anything falling + # outside of ${D}. + + # The portage shortcut to the above command is simply: + # + #einstall || die "einstall failed" +} diff --git a/skel.metadata.xml b/skel.metadata.xml new file mode 100644 index 0000000..46a44e5 --- /dev/null +++ b/skel.metadata.xml @@ -0,0 +1,34 @@ + + + + +no-herd + + @gentoo.org + + + + +