linamh/app-misc/lirc/lirc-0.8.7.ebuild
2010-12-25 17:43:20 +00:00

361 lines
9.9 KiB
Bash

# Copyright 1999-2010 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/app-misc/lirc/lirc-0.8.7.ebuild,v 1.3 2010/11/05 13:42:47 hwoarang Exp $
inherit eutils linux-mod flag-o-matic autotools
DESCRIPTION="decode and send infra-red signals of many commonly used remote controls"
HOMEPAGE="http://www.lirc.org/"
MY_P=${PN}-${PV/_/}
if [[ "${PV/_pre/}" = "${PV}" ]]; then
SRC_URI="mirror://sourceforge/lirc/${MY_P}.tar.bz2"
else
SRC_URI="http://www.lirc.org/software/snapshots/${MY_P}.tar.bz2"
fi
LICENSE="GPL-2"
SLOT="0"
KEYWORDS="amd64 ~ppc x86"
IUSE="debug doc X hardware-carrier transmitter"
S="${WORKDIR}/${MY_P}"
RDEPEND="
X? (
x11-libs/libX11
x11-libs/libSM
x11-libs/libICE
)
lirc_devices_alsa_usb? ( media-libs/alsa-lib )
lirc_devices_audio? ( >media-libs/portaudio-18 )
lirc_devices_irman? ( media-libs/libirman )"
# This are drivers with names matching the
# parameter --with-driver=NAME
IUSE_LIRC_DEVICES_DIRECT="
all userspace accent act200l act220l
adaptec alsa_usb animax asusdh atilibusb
atiusb audio audio_alsa avermedia avermedia_vdomate
avermedia98 awlibusb bestbuy bestbuy2 breakoutbox
bte bw6130 caraca chronos commandir
cph06x creative creative_infracd
devinput digimatrix dsp dvico ea65 ene0100
exaudio flyvideo ftdi gvbctv5pci hauppauge
hauppauge_dvb hercules_smarttv_stereo i2cuser
igorplugusb iguanaIR imon imon_24g imon_knob
imon_lcd imon_pad imon_rsc irdeo irdeo_remote
irlink irman irreal it87 ite8709
knc_one kworld leadtek_0007 leadtek_0010
leadtek_pvr2000 livedrive_midi
livedrive_seq logitech macmini mceusb
mediafocusI mouseremote
mouseremote_ps2 mp3anywhere mplay nslu2
packard_bell parallel pcmak pcmak_usb
pctv pixelview_bt878 pixelview_pak
pixelview_pro provideo realmagic
remotemaster sa1100 samsung sasem sb0540 serial
silitek sir slinke streamzap tekram
tekram_bt829 tira ttusbir tuxbox tvbox udp uirt2
uirt2_raw usb_uirt_raw usbx wpc8769l"
# drivers that need special handling and
# must have another name specified for
# parameter --with-driver=NAME
IUSE_LIRC_DEVICES_SPECIAL="
serial_igor_cesko
remote_wonder_plus xboxusb usbirboy inputlirc"
IUSE_LIRC_DEVICES="${IUSE_LIRC_DEVICES_DIRECT} ${IUSE_LIRC_DEVICES_SPECIAL}"
#device-driver which use libusb
LIBUSB_USED_BY_DEV="
all atilibusb awlibusb sasem igorplugusb imon imon_lcd imon_pad
imon_rsc streamzap mceusb xboxusb irlink commandir"
for dev in ${LIBUSB_USED_BY_DEV}; do
DEPEND="${DEPEND} lirc_devices_${dev}? ( dev-libs/libusb )"
done
# adding only compile-time depends
DEPEND="${RDEPEND} ${DEPEND}
virtual/linux-sources
lirc_devices_ftdi? ( dev-embedded/libftdi )
lirc_devices_all? ( dev-embedded/libftdi )"
# adding only run-time depends
RDEPEND="${RDEPEND}
lirc_devices_usbirboy? ( app-misc/usbirboy )
lirc_devices_inputlirc? ( app-misc/inputlircd )
lirc_devices_iguanaIR? ( app-misc/iguanaIR )"
# add all devices to IUSE
for dev in ${IUSE_LIRC_DEVICES}; do
IUSE="${IUSE} lirc_devices_${dev}"
done
add_device() {
: ${lirc_device_count:=0}
((lirc_device_count++))
if [[ ${lirc_device_count} -eq 2 ]]; then
ewarn
ewarn "When selecting multiple devices for lirc to be supported,"
ewarn "it can not be guaranteed that the drivers play nice together."
ewarn
ewarn "If this is not intended, then abort emerge now with Ctrl-C,"
ewarn "Set LIRC_DEVICES and restart emerge."
ewarn
epause
fi
local dev="${1}"
local desc="device ${dev}"
if [[ -n "${2}" ]]; then
desc="${2}"
fi
elog "Compiling support for ${desc}"
MY_OPTS="${MY_OPTS} --with-driver=${dev}"
}
pkg_setup() {
if use lirc_devices_mceusb2
then
ewarn "The mceusb2 driver has been merged into the mceusb."
ewarn "Please only use the latter now."
fi
ewarn "If your LIRC device requires modules, you'll need MODULE_UNLOAD"
ewarn "support in your kernel."
linux-mod_pkg_setup
# set default configure options
MY_OPTS=""
LIRC_DRIVER_DEVICE="/dev/lirc0"
if use lirc_devices_all; then
# compile in drivers for a lot of devices
add_device all "a lot of devices"
else
# compile in only requested drivers
local dev
for dev in ${IUSE_LIRC_DEVICES_DIRECT}; do
if use lirc_devices_${dev}; then
add_device ${dev}
fi
done
if use lirc_devices_remote_wonder_plus; then
add_device atiusb "device Remote Wonder Plus (atiusb-based)"
fi
if use lirc_devices_serial_igor_cesko; then
add_device serial "serial with Igor Cesko design"
MY_OPTS="${MY_OPTS} --with-igor"
fi
if use lirc_devices_imon_pad; then
ewarn "The imon_pad driver has incorporated the previous pad2keys patch"
ewarn "and removed the pad2keys_active option for the lirc_imon module"
ewarn "because it is always active."
ewarn "If you have an older imon VFD device, you may need to add the module"
ewarn "option display_type=1 to override autodetection and force VFD mode."
fi
if use lirc_devices_xboxusb; then
add_device atiusb "device xboxusb"
fi
if use lirc_devices_usbirboy; then
add_device userspace "device usbirboy"
LIRC_DRIVER_DEVICE="/dev/usbirboy"
fi
if [[ "${MY_OPTS}" == "" ]]; then
if [[ "${PROFILE_ARCH}" == "xbox" ]]; then
# on xbox: use special driver
add_device atiusb "device xboxusb"
else
# no driver requested
elog
elog "Compiling only the lirc-applications, but no drivers."
elog "Enable drivers with LIRC_DEVICES if you need them."
MY_OPTS="--with-driver=none"
fi
fi
fi
use hardware-carrier && MY_OPTS="${MY_OPTS} --without-soft-carrier"
use transmitter && MY_OPTS="${MY_OPTS} --with-transmitter"
if [[ -n "${LIRC_OPTS}" ]] ; then
ewarn
ewarn "LIRC_OPTS is deprecated from lirc-0.8.0-r1 on."
ewarn
ewarn "Please use LIRC_DEVICES from now on."
ewarn "e.g. LIRC_DEVICES=\"serial sir\""
ewarn
ewarn "Flags are now set per use-flags."
ewarn "e.g. transmitter, hardware-carrier"
local opt
local unsupported_opts=""
# test for allowed options for LIRC_OPTS
for opt in ${LIRC_OPTS}; do
case ${opt} in
--with-port=*|--with-irq=*|--with-timer=*|--with-tty=*)
MY_OPTS="${MY_OPTS} ${opt}"
;;
*)
unsupported_opts="${unsupported_opts} ${opt}"
;;
esac
done
if [[ -n ${unsupported_opts} ]]; then
ewarn "These options are no longer allowed to be set"
ewarn "with LIRC_OPTS: ${unsupported_opts}"
die "LIRC_OPTS is no longer recommended."
fi
fi
# Setup parameter for linux-mod.eclass
MODULE_NAMES="lirc(misc:${S})"
BUILD_TARGETS="all"
ECONF_PARAMS=" --localstatedir=/var
--with-syslog=LOG_DAEMON
--enable-sandboxed
--with-kerneldir=${KV_DIR}
--with-moduledir=/lib/modules/${KV_FULL}/misc
$(use_enable debug)
$(use_with X x)
${MY_OPTS}"
einfo
einfo "lirc-configure-opts: ${MY_OPTS}"
elog "Setting default lirc-device to ${LIRC_DRIVER_DEVICE}"
filter-flags -Wl,-O1
# force non-parallel make, Bug 196134
MAKEOPTS="${MAKEOPTS} -j1"
}
src_unpack() {
unpack ${A}
cd "${S}"
# Rip out dos CRLF
edos2unix contrib/lirc.rules
# Apply patches needed for some special device-types
use lirc_devices_audio || epatch "${FILESDIR}"/lirc-0.8.4-portaudio_check.patch
use lirc_devices_remote_wonder_plus && epatch "${FILESDIR}"/lirc-0.8.3_pre1-remotewonderplus.patch
# remove parallel driver on SMP systems
if linux_chkconfig_present SMP ; then
sed -i -e "s:lirc_parallel\.o::" drivers/lirc_parallel/Makefile.am
fi
# Bug #187418
if kernel_is ge 2 6 22 ; then
ewarn "Disabling lirc_gpio driver as it does no longer work Kernel 2.6.22+"
sed -i -e "s:lirc_gpio\.o::" drivers/lirc_gpio/Makefile.am
fi
# respect CFLAGS
sed -i -e 's:CFLAGS="-O2:CFLAGS=""\n#CFLAGS="-O2:' configure.ac
# setting default device-node
local f
for f in configure.ac acconfig.h; do
[[ -f "$f" ]] && sed -i -e '/#define LIRC_DRIVER_DEVICE/d' "$f"
done
echo "#define LIRC_DRIVER_DEVICE \"${LIRC_DRIVER_DEVICE}\"" >> acconfig.h
eautoreconf
}
src_install() {
sed -i -e "s:/usr/lib64:/usr/$(get_libdir):" tools/Makefile
emake DESTDIR="${D}" install || die "emake install failed"
newinitd "${FILESDIR}"/lircd-0.8.6 lircd
newinitd "${FILESDIR}"/lircmd lircmd
newconfd "${FILESDIR}"/lircd.conf.2 lircd
insinto /etc/modprobe.d/
newins "${FILESDIR}"/modprobed.lirc lirc.conf
newinitd "${FILESDIR}"/irexec-initd-0.8.6-r2 irexec
newconfd "${FILESDIR}"/irexec-confd irexec
if use doc ; then
dohtml doc/html/*.html
insinto /usr/share/doc/${PF}/images
doins doc/images/*
fi
insinto /usr/share/lirc/remotes
doins -r remotes/*
keepdir /var/run/lirc /etc/lirc
if [[ -e "${D}"/etc/lirc/lircd.conf ]]; then
newdoc "${D}"/etc/lirc/lircd.conf lircd.conf.example
fi
}
pkg_preinst() {
linux-mod_pkg_preinst
local dir="${ROOT}/etc/modprobe.d"
if [[ -a "${dir}"/lirc && ! -a "${dir}"/lirc.conf ]]; then
elog "Renaming ${dir}/lirc to lirc.conf"
mv -f "${dir}/lirc" "${dir}/lirc.conf"
fi
# copy the first file that can be found
if [[ -f "${ROOT}"/etc/lirc/lircd.conf ]]; then
cp "${ROOT}"/etc/lirc/lircd.conf "${T}"/lircd.conf
elif [[ -f "${ROOT}"/etc/lircd.conf ]]; then
cp "${ROOT}"/etc/lircd.conf "${T}"/lircd.conf
MOVE_OLD_LIRCD_CONF=1
elif [[ -f "${D}"/etc/lirc/lircd.conf ]]; then
cp "${D}"/etc/lirc/lircd.conf "${T}"/lircd.conf
fi
# stop portage from touching the config file
if [[ -e "${D}"/etc/lirc/lircd.conf ]]; then
rm -f "${D}"/etc/lirc/lircd.conf
fi
}
pkg_postinst() {
linux-mod_pkg_postinst
# copy config file to new location
# without portage knowing about it
# so it will not delete it on unmerge or ever touch it again
if [[ -e "${T}"/lircd.conf ]]; then
cp "${T}"/lircd.conf "${ROOT}"/etc/lirc/lircd.conf
if [[ "$MOVE_OLD_LIRCD_CONF" = "1" ]]; then
elog "Moved /etc/lircd.conf to /etc/lirc/lircd.conf"
rm -f "${ROOT}"/etc/lircd.conf
fi
fi
ewarn
ewarn "The lirc_gpio driver will not work with Kernels 2.6.22+"
ewarn "You need to switch over to /dev/input/event? if you need gpio"
ewarn "This device can than then be used via lirc's dev/input driver."
ewarn
ewarn "The new default location for lircd.conf is inside of"
ewarn "/etc/lirc/ directory"
}