linamh/www-apache/mod_nss/files/47_mod_nss.conf
geos_one 04ecc8ca19 add digest
git-svn-id: https://svn.disconnected-by-peer.at/svn/linamh/trunk/linamh@154 6952d904-891a-0410-993b-d76249ca496b
2007-08-08 19:25:23 +00:00

214 lines
8.4 KiB
Plaintext

#
# This is the Apache server configuration file providing SSL support using.
# the mod_nss plugin. It contains the configuration directives to instruct
# the server how to serve pages over an https connection.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
<IfDefine NSS>
LoadModule gnutls_module modules/mod_gnutls.so
</IfDefine>
<IfModule mod_nss.c>
#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
# Listen directives: "Listen [::]:8443" and "Listen 0.0.0.0:8443"
#
Listen 8443
##
## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##
#
# Some MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
NSSPassPhraseDialog builtin
# Pass Phrase Helper:
# This helper program stores the token password pins between
# restarts of Apache.
NSSPassPhraseHelper /usr/sbin/nss_pcache
# Configure the SSL Session Cache.
# NSSSessionCacheSize is the number of entries in the cache.
# NSSSessionCacheTimeout is the SSL2 session timeout (in seconds).
# NSSSession3CacheTimeout is the SSL3/TLS session timeout (in seconds).
NSSSessionCacheSize 10000
NSSSessionCacheTimeout 100
NSSSession3CacheTimeout 86400
#
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. Those platforms usually also provide a non-blocking
# device, /dev/urandom, which may be used instead.
#
# This does not support seeding the RNG with each connection.
NSSRandomSeed startup builtin
#NSSRandomSeed startup file:/dev/random 512
#NSSRandomSeed startup file:/dev/urandom 512
</IfModule>
<IfDefine NSS_EXAMPLE>
##
## SSL Virtual Host Context
##
<VirtualHost _default_:8443>
# General setup for the virtual host
#DocumentRoot "/usr/htdocs"
#ServerName www.example.com:8443
#ServerAdmin you@example.com
# mod_nss can log to separate log files, you can choose to do that if you'd like
# LogLevel is not inherited from httpd.conf.
#ErrorLog /usr/logs/error_log
#TransferLog /usr/logs/access_log
LogLevel warn
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
NSSEngine on
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_nss documentation for a complete list.
# SSL 3 ciphers. SSL 2 is disabled by default.
NSSCipherSuite +rsa_rc4_128_md5,+rsa_rc4_128_sha,+rsa_3des_sha,-rsa_des_sha,-rsa_rc4_40_md5,-rsa_rc2_40_md5,-rsa_null_md5,-rsa_null_sha,+fips_3des_sha,-fips_des_sha,-fortezza,-fortezza_rc4_128_sha,-fortezza_null,-rsa_des_56_sha,-rsa_rc4_56_sha,+rsa_aes_128_sha,+rsa_aes_256_sha
# SSL 3 ciphers + ECC ciphers. SSL 2 is disabled by default.
#
# Comment out the NSSCipherSuite line above and use the one below if you have
# ECC enabled NSS and mod_nss and want to use Elliptical Curve Cryptography
#NSSCipherSuite +rsa_rc4_128_md5,+rsa_rc4_128_sha,+rsa_3des_sha,-rsa_des_sha,-rsa_rc4_40_md5,-rsa_rc2_40_md5,-rsa_null_md5,-rsa_null_sha,+fips_3des_sha,-fips_des_sha,-fortezza,-fortezza_rc4_128_sha,-fortezza_null,-rsa_des_56_sha,-rsa_rc4_56_sha,+rsa_aes_128_sha,+rsa_aes_256_sha,-ecdh_ecdsa_null_sha,+ecdh_ecdsa_rc4_128_sha,+ecdh_ecdsa_3des_sha,+ecdh_ecdsa_aes_128_sha,+ecdh_ecdsa_aes_256_sha,-ecdhe_ecdsa_null_sha,+ecdhe_ecdsa_rc4_128_sha,+ecdhe_ecdsa_3des_sha,+ecdhe_ecdsa_aes_128_sha,+ecdhe_ecdsa_aes_256_sha,-ecdh_rsa_null_sha,+ecdh_rsa_128_sha,+ecdh_rsa_3des_sha,+ecdh_rsa_aes_128_sha,+ecdh_rsa_aes_256_sha,-echde_rsa_null,+ecdhe_rsa_rc4_128_sha,+ecdhe_rsa_3des_sha,+ecdhe_rsa_aes_128_sha,+ecdhe_rsa_aes_256_sha
NSSProtocol SSLv3,TLSv1
# SSL Certificate Nickname:
# The nickname of the RSA server certificate you are going to use.
NSSNickname Server-Cert
# SSL Certificate Nickname:
# The nickname of the ECC server certificate you are going to use, if you
# have an ECC-enabled version of NSS and mod_nss
#NSSECCNickname Server-Cert-ecc
# Server Certificate Database:
# The NSS security database directory that holds the certificates and
# keys. The database consists of 3 files: cert8.db, key3.db and secmod.db.
# Provide the directory that these files exist.
NSSCertificateDatabase /etc/apache2
# Database Prefix:
# In order to be able to store multiple NSS databases in one directory
# they need unique names. This option sets the database prefix used for
# cert8.db and key3.db.
#NSSDBPrefix my-prefix-
# Client Authentication (Type):
# Client certificate verification type. Types are none, optional and
# require.
#NSSVerifyClient none
#
# Online Certificate Status Protocol (OCSP).
# Verify that certificates have not been revoked before accepting them.
#NSSOCSP off
#
# Use a default OCSP responder. If enabled this will be used regardless
# of whether one is included in a client certificate. Note that the
# server certificate is verified during startup.
#
# NSSOCSPDefaultURL defines the service URL of the OCSP responder
# NSSOCSPDefaultName is the nickname of the certificate to trust to
# sign the OCSP responses.
#NSSOCSPDefaultResponder on
#NSSOCSPDefaultURL http://example.com/ocsp/status
#NSSOCSPDefaultName ocsp-nickname
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_nss documentation
# for more details.
#<Location />
#NSSRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o StrictRequire:
# This denies access when "NSSRequireSSL" or "NSSRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#NSSOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
<Files ~ "\.(cgi|shtml|phtml|php3?)$">
NSSOptions +StdEnvVars
</Files>
<Directory "/usr/cgi-bin">
NSSOptions +StdEnvVars
</Directory>
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
#CustomLog /home/rcrit/redhat/apache/logs/ssl_request_log \
# "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</VirtualHost>
</IfDefine>