From 7fb2da390e37ce10f21b9a8cf53b6d584b3d6132 Mon Sep 17 00:00:00 2001 From: Mario Fetka Date: Wed, 1 Sep 2010 07:49:10 +0200 Subject: [PATCH] autotools fix --- libprozilla/acinclude.m4 | 440 --------------------------------------- 1 file changed, 440 deletions(-) diff --git a/libprozilla/acinclude.m4 b/libprozilla/acinclude.m4 index bece3f1..f553103 100644 --- a/libprozilla/acinclude.m4 +++ b/libprozilla/acinclude.m4 @@ -665,443 +665,3 @@ fi AC_SUBST($1)dnl ]) -## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*- -## Copyright (C) 1996-1999, 2000 Free Software Foundation, Inc. -## Originally by Gordon Matzigkeit , 1996 -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -## General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -## -## As a special exception to the GNU General Public License, if you -## distribute this file as part of a program that contains a -## configuration script generated by Autoconf, you may include it under -## the same distribution terms that you use for the rest of that program. - -# serial 40 AC_PROG_LIBTOOL -AC_DEFUN(AC_PROG_LIBTOOL, -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl - -# Save cache, so that ltconfig can load it -AC_CACHE_SAVE - -# Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ -LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ -DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -##$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ -$libtool_flags $ac_aux_dir/ltmain.sh $lt_target \ -|| AC_MSG_ERROR([libtool configure failed]) - -# Reload cache, that may have been modified by ltconfig -AC_CACHE_LOAD - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -# Redirect the config.log output again, so that the ltconfig log is not -# clobbered by the next message. -exec 5>>./config.log -]) - -AC_DEFUN(AC_LIBTOOL_SETUP, -[AC_PREREQ(2.13)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_RANLIB])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_NM])dnl -AC_REQUIRE([AC_PROG_LN_S])dnl -dnl - -case "$target" in -NONE) lt_target="$host" ;; -*) lt_target="$target" ;; -esac - -# Check for any special flags to pass to ltconfig. -# -# the following will cause an existing older ltconfig to fail, so -# we ignore this at the expense of the cache file... Checking this -# will just take longer ... bummer! -#libtool_flags="--cache-file=$cache_file" -# -test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" -test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" -test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" -test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" -test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], -[libtool_flags="$libtool_flags --enable-dlopen"]) -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[libtool_flags="$libtool_flags --enable-win32-dll"]) -AC_ARG_ENABLE(libtool-lock, - [ --disable-libtool-lock avoid locking (might break parallel builds)]) -test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" -test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case "$lt_target" in -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case "`/usr/bin/file conftest.o`" in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; - -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; -]) -esac -]) - -# AC_LIBTOOL_DLOPEN - enable checks for dlopen support -AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) - -# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's -AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) - -# AC_ENABLE_SHARED - implement the --enable-shared flag -# Usage: AC_ENABLE_SHARED[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_SHARED, [dnl -define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(shared, -changequote(<<, >>)dnl -<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl -]) - -# AC_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no)]) - -# AC_ENABLE_STATIC - implement the --enable-static flag -# Usage: AC_ENABLE_STATIC[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_STATIC, [dnl -define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(static, -changequote(<<, >>)dnl -<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_static=AC_ENABLE_STATIC_DEFAULT)dnl -]) - -# AC_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no)]) - - -# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag -# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl -define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(fast-install, -changequote(<<, >>)dnl -<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl -]) - -# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install -AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no)]) - -# AC_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN(AC_PROG_LD, -[AC_ARG_WITH(gnu-ld, -[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], -test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -ac_prog=ld -if test "$ac_cv_prog_gcc" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in - # Accept absolute paths. -changequote(,)dnl - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' -changequote([,])dnl - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(ac_cv_path_LD, -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - ac_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" -else - ac_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$ac_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_PROG_LD_GNU -]) - -AC_DEFUN(AC_PROG_LD_GNU, -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - ac_cv_prog_gnu_ld=yes -else - ac_cv_prog_gnu_ld=no -fi]) -]) - -# AC_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN(AC_PROG_NM, -[AC_MSG_CHECKING([for BSD-compatible nm]) -AC_CACHE_VAL(ac_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - ac_cv_path_NM="$NM" -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" - break - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" - break - else - ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm -fi]) -NM="$ac_cv_path_NM" -AC_MSG_RESULT([$NM]) -]) - -# AC_CHECK_LIBM - check for math library -AC_DEFUN(AC_CHECK_LIBM, -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case "$lt_target" in -*-*-beos* | *-*-cygwin*) - # These system don't have libm - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, main, LIBM="-lm") - ;; -esac -]) - -# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl convenience library and INCLTDL to the include flags for -# the libltdl header and adds --enable-ltdl-convenience to the -# configure arguments. Note that LIBLTDL and INCLTDL are not -# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not -# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed -# with '${top_builddir}/' and INCLTDL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case "$enable_ltdl_convenience" in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) -]) - -# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl installable library and INCLTDL to the include flags for -# the libltdl header and adds --enable-ltdl-install to the configure -# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is -# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed -# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed -# with '${top_srcdir}/' (note the single quotes!). If your package is -# not flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, main, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - INCLTDL= - fi -]) - -dnl old names -AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl -AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl -AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl -AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl -AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl -AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl -AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl - -dnl This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL])dnl